Refine
Year of publication
- 2003 (48) (remove)
Document Type
- Article (27)
- Doctoral Thesis (18)
- Postprint (3)
Keywords
- Acetylacetonat (1)
- AgCo (1)
- Colloid (1)
- Confinement (1)
- EDX (1)
- EELS (1)
- Group Transfer polymerisation (1)
- Herstellung (1)
- Kern-Hülle (1)
- Kobaltcarbonyl (1)
Institute
- Institut für Chemie (48) (remove)
From the stem bark of Erythrina burttii, a new isoflavone, 5,2',4'-trihydroxy-7-methoxy-6-(3- methylbut-2-enyl)isoflavone (trivial name, 7-O-methylluteone) and a new flavanone, 5,7-dihydroxy-4'-methoxy- 3'-(3-methylbutadienyl)-5'-(3-methylbut-2-enyl)flavanone (trivial name, burttinonedehydrate) along with three known isoflavonoids (8-prenylluteone, 3-O-methylcalopocarpin and genistein) were isolated. The structures were detd. on the basis of spectroscopic evidence.
Motivated by the possible importance of OBrO in atmospheric photochemistry, multireference configuration interaction calculations of the low-lying excited states were carried out to obtain information about the electronic vertical spectrum up to excitation energies of about 6 eV from the ground state, including the transition dipole moments, and about possible photodissociation pathways, based on one-dimensional cuts through the potential energy surfaces for dissociation into BrO + O and Br + O2, respectively. In addition, for probing the angle dependence the bending potentials were also calculated.
During the past several decades polymer materials become widely used as components of medical devices and implants such as hemodialysers, bioartificial organs as well as vascular and recombinant surgery. Most of the devices cannot avoid the blood contact in their use. When the polymer materials come in contact with blood they can cause different undesired host responses like thrombosis, inflammatory reactions and infections. Thus the materials must be hemocompatible in order to minimize these undesired body responses. The earliest and one of the main problems in the use of blood-contacting biomaterials is the surface induced thrombosis. The sequence of the thrombus formation on the artificial surfaces has been well established. The first event, which occurs, after exposure of biomaterials to blood, is the adsorption of blood proteins. Surface physicochemical properties of the materials as wettability greatly influence the amount and conformational changes of adsorbed proteins. In turn the type, amount and conformational state of the adsorbed protein layer determines whether platelets will adhere and become activated or not on the artificial surface and thus to complete the thrombus formation. The adsorption of fibrinogen (FNG), which is present in plasma, has been shown to be closely related to surface induced thrombosis by participating in all processes of the thrombus formation such as fibrin formation, platelet adhesion and aggregation. Therefore study the FNG adsorption to artificial surfaces could contribute to better understanding of the mechanisms of platelet adhesion and activation and thus to controlling the surface induced thrombosis. Endothelization of the polymer surfaces is one of the strategies for improving the materials hemocompatibility, which is believed to be the most ideal solution for making truly blood-compatible materials. Since at physiological conditions proteins such as FNG and fibronectin (FN) are the usual extracellular matrix (ECM) for endothelial cells (EC) adhesion, precoating of the materials with these proteins has been shown to improve EC adhesion and growth in vitro. ECM proteins play an essential role not only like a structural support for cell adhesion and spreading, but also they are important factor in transmitting signals for different cell functions. The ability of cells to remodel plasma proteins such as FNG and FN in matrix-like structures together with the classical cell parameters such as actin cytoskeleton and focal adhesion formation could be used as an criteria for proper cell functioning. The establishment and the maintaining of delicate balance between cell-cell and cell-substrate contacts is another important factor for better EC colonization of the implants. The functionality of newly established endothelium in order to produce antithromotic substances should be always considered when EC seeding is used for improving the hemocompatibility of the polymer materials. Controlling the polymer surface properties such as surface wettability represents a versatile approach to manipulate the above cellular responses and therefore can be used in biomaterial and tissue engineering applications for producing better hemocompatible materials.
Ten meso-tetraphenylporphyrin-type heterodimers containing a partly or completely beta-brominated subunit were synthesized and characterized by UV-visible spectroscopy, cyclic voltammetry and spectroelectrochemistry, showing the presence of low electronic interactions between the two subunits. The investigated compounds are represented as M[(tripp- tpp(Br-4)]M and M[tripp-tpp(Br-8)]M (M = 2H, Zn, Ni, Co and Cu) where tripp-tpp(Br-4) is the tetraanion of 1-[5- (10,15,20-triphenylporphyrinyl)]-4-[10-(2,3,12,13-tetrabromoporphyr inyl)]-benzene and tripptpp(Br-8) is the tetraanion of 1-[5-(10,15,20-triphenylporphyrinyl)]-4-[10-(2,3,7,8,12,13,17,18-octabro moporphyrinyl)] -benzene. One of the synthesized dimers, H-2[tripp-tpp(Br-8)]H-2, was characterized by a single-crystal X-ray investigation. Copyright (C) 2003 Society of Porphyrins & Phthalocyanines
The present work is dealing with the first synthesis and characterisation of amphiphilic diblock copolymers bearing b-dicarbonyl (acetoacetoxy) chelating residues. Polymers were obtained by Group Transfer Polymerisation (GTP)/acetoacetylation and controlled radical polymerisation techniques (RAFT).Different micellar morphologies of poly(n-butyl methacrylate)-block-poly[2-(acetoacetoxy)ethyl methacrylate] (pBuMA-b-pAEMA) were observed in cyclohexane as a selective solvent. Depending on the block length ratio, either spherical, elliptical, or cylindrical micelles were formed. The density of the polymer chains at the core/corona interface is considerably higher as compared to any other strongly segregating system reported in the literature. It is demonstrated that there are H-bond interactions existing between acetoacetoxy groups, which increase the incompatibility between block segments. In addition, such interactions lead to the formation of secondary structures (such as b-sheets or globular structures) and larger superstructures in the micrometer length scale.Block copolymers were also used to solubilise metal ion salts of different geometries and oxidation states in organic media, in which are otherwise insoluble. Sterically stabilised colloidal hybrid materials are formed, i.e. monodisperse micelles having the metal ion salt incorporated in their core upon complexation with the ligating pAEMA block, whereas pBuMA forms the solvating corona responsible for stabilisation in solution. Systematic studies show that the aggregation behaviour is dependent on different factors, such as the tautomeric form of the beta-dicarbonyl ligand (keto/enol) as well as the nature and amount of added metal ion salt.
The recent work on a variety of family 18 chitonolytic enzymes has yielded important data concerning the structure, substrate-binding, catalysis, inhibitor-binding and even dynamics. These data have been useful in helping to better understand the roles of various types of chitinases in chitin hydrolysis, to rationally engineer the properties of these enzymes, thus making them more suitable as biocatalysts, and to study and understand the effectiveness of natural and designed chitinase inhibitors, which may be of medical interest. On the other hand, the recent work on ChiB shows that catalysis in family 18 chitinases is a highly complicated process, involving larger parts of the enzyme and dynamics. Thus, despite recent discoveries, there is still a lot more to discover about how these enzyme work.
The soln.-state conformations of N,N',N''-triacetyl chitotriose (1) and other potential chitinase inhibitors 2-4 were studied using a combination of NMR spectroscopy (NOESY) and mol. mechanics calcns. Detn. solely of the global energy min. conformation was found to be insufficient for an agreement with the NMR results. An appropriate consistency between the NMR exptl. data and theor. calcns. was only reached by assessing the structures as population-weighted av. conformers based on Boltzmann distributions derived from the calcd. relative energies. Analogies, but also particular differences, between the synthetic compds. 2-4 and the naturally-occurring N,N',N''-triacetyl chitotriose were found. Furthermore, the conformation of compds. 1 and 2 when bound to hevamine was also studied using transferred NOESY expts. and the binding process was found to impart a level of conformational restriction on the ligands. The preferred conformation as detd. for 1 in the bound state to hevamine belonged to one of the conformational families found for the compd. when free in soln., although full characterization of the bound-state conformations was impeded due to severe signal overlap. Satn. transfer difference NMR expts. were also employed to analyze the binding epitopes of the bound compds. We thus detd. that it is mainly the acetyl amido groups of the trisaccharide and the heterocyclic moiety which are in close contact with hevamine.
Vibrationally resolved fluorescence spectra of four angular [N]phenylenes were recorded with laser excited Shpol’skii spectroscopy (LESS) in an n-octane matrix at 10 K. In general, the same vibrational frequencies were observed in the fluorescence excitation and emission spectra, indicating that the geometries of ground and electronically excited state are very similar. Because of intensity borrowing from the S2 state, vibrations of two different symmetries were observed in the fluorescence excitation spectra of angular [3]phenylene and zig-zag[5]phenylene. This finding allowed the location of the S2 state for these compounds. DFT calculations(RB3LYP/6-31G*) of the ground state vibrational frequencies were made. The calculated vibrational modes were in reasonably good agreement with the experimental data. A new very low-frequency vibration of approximately 100 cm-1 was predicted and experimentally confirmed for all [N]phenylenes investigated. This vibration seems to be unique for [N]phenylenes and is attributed to an in-plane movement of the carbon backbone.
Polymeric Surfactants
(2003)
Polyelectrolyte multilayer capsules as controlled permeability vehicles and catalyst carriers
(2003)
Investigations with frequency domain photon density waves allow elucidation of absorption and scattering properties of turbid media. The temporal and spatial propagation of intensity modulated light with frequencies up to more than 1 GHz can be described by the P1 approximation to the Boltzmann transport equation. In this study, we establish requirements for the appropriate choice of turbid model media and characterize mixtures of isosulfan blue as absorber and polystyrene beads as scatterer. For these model media, the independent determination of absorption and reduced scattering coefficients over large absorber and scatterer concentration ranges is demonstrated with a frequency domain photon density wave spectrometer employing intensity and phase measurements at various modulation frequencies.
We report theoretical investigations on the second photoelectron band of chlorine dioxide molecule by ab initio quantum dynamical methods. This band exhibits a highly complex structure and represents a composite portrait of five excited energetically close-lying electronic states of ClO2+. Much of this complexity is likely to be arising due to strong vibronic interactions among these electronic states - which we address and examine herein. The near equilibrium MRCI potential energy surfaces (PESs) of these five cationic states reported by Peterson and Werner [J. Chem. Phys. 99 (1993) 302] for the C2v configuration, are extended for the Cs geometry assuming a harmonic vibration along the asymmetric stretching mode. The strength of the vibronic coupling parameters of the Hamiltonian are calculated by ab initio CASSCF-MRCI method and conical intersections of the PESs are established. The diabatic Hamiltonian matrix is constructed within a linear vibronic coupling scheme and the resulting PESs are employed in the nuclear dynamical simulations, carried out with the aid of a time-dependent wave packet approach. Companion calculations are performed for transitions to the uncoupled electronic states in order to reveal explicitly the impact of the nonadiabatic coupling on the photoelectron dynamics. The theoretical findings are in good accord with the experimental observations. The femtosecond nonradiative decay dynamics of ClO2+ excited electronic states mediated by conical intersections is also examined and discussed.
Lipid monolayers coupled to polyelectrolyte multilayers : stability, dynamics and interactions
(2003)
In this paper we report time-dependent configuration interaction singles calculations modeling the laser- induced current through a metal-insulator-metal (MIM) contact. We compare our results to recent experiments [D. Diesing, M. Merschdorf, A. Thon, and W. Pfeiffer, Appl. Phys. B (to be published)]. We use two jellium slabs separated by a vacuum region in a one-dimensional model to describe the MIM contact. The contact is coupled to ultrashort (fs) laser pulses by the semiclassical dipole approximation. We discuss simulated two-pulse correlation spectra in comparison to experimental results
Ein Spezialgebiet der modernen Mikroelektronik ist die Miniaturisierung und Entwicklung von neuen nanostrukturierten und Komposit-Materialen aus 3d-Metallen. Durch geeignete Zusammensetzungen können diese sowohl mit einer hohen Sättigungsmagnetisierung und Koerzitivfeldstärke als mit besserer Oxidationsbeständigkeit im Vergleich zu den reinen Elementen erzielt werden. In der vorliegenden Arbeit werden neue Methoden für die Herstellung von bimetallischen kolloidalen Nanopartikeln vor allem mit einer Kern-Hülle-Struktur (Kern@Hülle) präsentiert. Bei der überwiegenden Zahl der vorgestellten Reaktionen handelt es sich um die thermische Zersetzung von metallorganischen Verbindungen wie Kobaltcarbonyl, Palladium- und Platinacetylacetonate oder die chemische Reduktion von Metallsalze mit langkettigem Alkohol in organischem Lösungsmittel. Daneben sind auch Kombinationen aus diesen beiden Verfahren beschrieben. Es wurden Kolloide aus einem reinen Edelmetall (Pt, Pd, Ag) in einem organischen Lösungsmittel synthetisiert und daraus neue, bisher in dieser Form nicht bekannte Ag@Co-, Pt@Co-, Pd@Co- und Pt@Pd@Co-Nanopartikel gewonnen. Der Kobaltgehalt der Ag@Co-, Teilchen konnte im Bereich von 5 bis 73 At. % beliebig eingestellt werden. Der mittlere Durchmesser der Ag@Co-Partikel wurde von 5 nm bis 15 nm variiert. Bei der Herstellung von Pt@Co-Teilchen wurde eine unterschiedlich dicke Kobalt-Hülle von ca. 1,0 bis 2,5 nm erzielt. Im Fall des Palladiums wurden sowohl monodispere als auch polydisperse Pd-Nanopartikel mit einer maximal 1,7-2,0nm dicken Kobalthülle synthetisiert. Ein großer Teil dieser Arbeit befasst sich mit den magnetischen Eigenschaften der kolloidalen Teilchen, wobei die SQUID-Magnetometrie und Röntgenzirkulardichroismus (XMCD) dafür eingesetzt wurden. Weil magnetische Messungen alleine nur indirekte Schlüsse über die untersuchten Systeme erlauben, wurde dabei besonderer Wert auf die möglichst genaue strukturelle Charakterisierung der Proben mittels moderner Untersuchungsmethoden gelegt. Röntgendiffraktometrie (XRD), Röntgenabsorptionsfeinstruktur- (EXAFS) und UV-Vis-Spektroskopie sowie Transmissionselektronenmikroskopie (TEM) in Kombination mit Elektronen Energieverlustspektroskopie (EELS) und energiedispersive Röntgenfluoreszensanalyse (EDX) wurden verwendet.
The colloidal systems are present everywhere in many varieties such as emulsions (liquid droplets dispersed in liquid), aerosols (liquid dispersed in gas), foam (gas in liquid), etc. Among several new methods for the preparation of colloids, the so-called miniemulsion technique has been shown to be one of the most promising. Miniemulsions are defined as stable emulsions consisting of droplets with a size of 50-500 nm by shearing a system containing oil, water, a surfactant, and a highly water insoluble compound, the so-called hydrophobe 1. In the first part of this work, dynamic crystallization and melting experiments are described which were performed in small, stable and narrowly distributed nanodroplets (confined systems) of miniemulsions. Both regular and inverse systems were examined, characterizing, first, the crystallization of hexadecane, secondly, the crystallization of ice. It was shown for both cases that the temperature of crystallization in such droplets is significantly decreased (or the required undercooling is increased) as compared to the bulk material. This was attributed to a very effective suppression of heterogeneous nucleation. It was also found that the required undercooling depends on the nanodroplet size: with decreasing droplet size the undercooling increases. 2. It is shown that the temperature of crystallization of other n-alkanes in nanodroplets is also significantly decreased as compared to the bulk material due to a very effective suppression of heterogeneous nucleation. A very different behavior was detected between odd and even alkanes. In even alkanes, the confinement in small droplets changes the crystal structure from a triclinic (as seen in bulk) to an orthorhombic structure, which is attributed to finite size effects inside the droplets. An intermediate metastable rotator phase is of less relevance for the miniemulsion droplets than in the bulk. For odd alkanes, only a strong temperature shift compared to the bulk system is observed, but no structure change. A triclinic structure is formed both in bulk and in miniemulsion droplets. 3. In the next part of the thesis it is shown how miniemulsions could be successfully applied in the development of materials with potential application in pharmaceutical and medical fields. The production of cross-linked gelatin nanoparticles is feasible. Starting from an inverse miniemulsion, the softness of the particles can be controlled by varying the initial concentration, amount of cross-link agent, time of cross-linking, among other parameters. Such particles show a thermo-reversible effect, e.g. the particles swell in water above 37 °C and shrink below this temperature. Above 37 °C the chains loose the physical cross-linking, however the particles do not loose their integrity, because of the chemical cross-linking. Those particles have potential use as drug carriers, since gelatin is a natural polymer derived from collagen. 4. The cross-linked gelatin nanoparticles have been used for the biomineralization of hydroxyapatite (HAP), a biomineral, which is the major constituent of our bones. The biomineralization of HAP crystals within the gelatin nanoparticles results in a hybrid material, which has potential use as a bone repair material. 5. In the last part of this work we have shown that layers of conjugated semiconducting polymers can be deposited from aqueous dispersion prepared by the miniemulsion process. Dispersions of particles of different conjugated semiconducting polymers such as a ladder-type poly(para-phenylene) and several soluble derivatives of polyfluorene could be prepared with well-controlled particle sizes ranging between 70 - 250 nm. Layers of polymer blends were prepared with controlled lateral dimensions of phase separation on sub-micrometer scales, utilizing either a mixture of single component nanoparticles or nanoparticles containing two polymers. From the results of energy transfer it is demonstrated that blending two polymers in the same particle leads to a higher efficiency due to the better contact between the polymers. Such an effect is of great interest for the fabrication of opto-electronic devices such as light emitting diodes with nanometer size emitting points and solar cells comprising of blends of electron donating and electron accepting polymers.
Core-Modified Hexaphyrins; Characterization of Two- and Four-Ring Inverted 26 ô Aromatic Macrocycles
(2003)
Results of an inter-laboratory round-robin study of the application of time-resolved emission spectroscopy (TRES) to the speciation of uranium(VI) in aqueous media are presented. The round-robin study involved 13 independent laboratories, using various instrumentation and data analysis methods. Samples were prepared based on appropriate speciation diagrams and, in general, were found to be chemically stable for at least six months. Four different types of aqueous uranyl solutions were studied: (1) acidic medium where UO22+aq is the single emitting species, (2) uranyl in the presence of fluoride ions, (3) uranyl in the presence of sulfate ions, and (4) uranyl in aqueous solutions at different pH, promoting the formation of hydrolyzed species. Results between the laboratories are compared in terms of the number of decay components, luminescence lifetimes, and spectral band positions. The successes and limitations of TRES in uranyl analysis and speciation in aqueous solutions are discussed.