Refine
Has Fulltext
- no (127) (remove)
Year of publication
Document Type
- Article (124)
- Doctoral Thesis (3)
Is part of the Bibliography
- yes (127)
Keywords
- X-ray structure (6)
- X-ray (4)
- Cycloaddition (3)
- Lactams (3)
- Structure elucidation (3)
- Trifluoromethanesulfonamide (3)
- crystal structure (3)
- Alkylpyridinium salts (2)
- Arenesulfonamides (2)
- EPR (2)
Institute
- Institut für Chemie (127) (remove)
The synthesis of 7-methoxy-8-(4-methyl-3-furyl)-2H-chromen-2-one, a natural product with antileishmanial activity recently isolated from the plant Galipea panamensis, is described. The key step is a Suzuki-Miyaura coupling of a furan-3-boronic acid and an 8-halocoumarin, which is advantageously synthesized using a ring-closing metathesis reaction. Several non-natural analogues are also available along these lines.
A Co(II)-imidazolate-4-amide-5-imidate based MOF, IFP-5, is synthesized by using an imidazolate anion-based novel ionic liquid as a linker precursor under solvothermal conditions. IFP-5 shows significant amounts of gas (N-2, CO2, CH4 and H-2) uptake capacities. IFP-5 exhibits an independent high spin Co(II) centre and antiferromagnetic coupling.
A Co(II)-imidazolate-4-amide-5-imidate based MOF, IFP-5, is synthesized by using an imidazolate anion-based novel ionic liquid as a linker precursor under solvothermal conditions. IFP-5 shows significant amounts of gas (N2, CO2, CH4 and H2) uptake capacities. IFP-5 exhibits an independent high spin Co(II) centre and antiferromagnetic coupling.
The separation of ethane/ethene mixtures (as well as other paraffin/olefin mixtures) is one of the most important but challenging processes in the petrochemical industry. In this work, we report the synthesis of ZIF-318, isostructural to ZIF-8 but built from the mixed linkers of 2-methylimidazole (L1) and 2-trifluoromethylimidazole (L2) (ZIF-318 = [(Zn(L1)(L2)](n)). The synthesis has been optimized to proceed without ZnO-formation. Using only the L2 linker under solvothermal conditions afforded ZnO-embedded in the H-bonded and non-porous coordination polymer ZnO@[Zn-2(L2)(2)(HCOO)(OH)](n). The slight differences in the size of the substituents (-CH3 vs. -CF3) possibly in combination with different electronic inductive effects led to small but significant changes to the pore size and properties respectively, though the effective pore opening (aperture) size of ZIF-318 remained the same in comparison with ZIF-8. ZIF-318 is chemically (boiling water, methanol, benzene, and wide pH range at room temperature for 1 day), thermally (up to 310 degrees C) stable, and more hydrophobic than ZIF-8 which is proven by contact angle measurement. ZIF-318 can be activated for N-2, CO2, CH4, H-2, ethane, ethane, propane, and propene gases sorptions. Consequently, in breakthrough experiments, the ethane/ethene mixtures can be separated.
General syntheses have been developed for meso-substituted porphyrins with one or two substituents in the 5,10- positions and no beta substituents. 5-Substituted porphyrins with only one meso substituent are easily prepared by an acid-catalyzed condensation of dipyrromethane, pyrrole-2-carbaldehyde. and an appropriate aldehyde using a "[2+1+1]" approach. Similarly, 5,10-disubstituted porphyrins are accessible by simple condensation of unsubstituted tripyrrane with pyrrole and various aldehydes using a "[3+1]" approach. The yields for these reactions are low to moderate and additional formation of either di- or mono-substituted porphyrins due to scrambling of the intermediates is observed. However, the reactions can be performed quite easily and the desired target compounds are easily removed due to large differences in solubility. A complementary and more selective synthesis involves the use of organolithium reagents for SNAr reactions. Reaction of in situ generated porphyrin (porphine) with 1.1-8 equivalents of RLi gave the monosubstituted porphyrins, while reaction with 3-6 equivalents of RLi gave the 5,10-disubstituted porphyrins in yields ranging from 43 to 90%. These hitherto almost inaccessible compounds complete the series of different homologues of A-, 5,15-A(2)-, 5,10-A(2)-, A(3)-, and A(4)-type porphyrin's and allow an investigation of the gradual influence of type, number, and regiochemical arrangement of substituents on the properties of meso-substituted porphyrins. They also present important starting materials for the synthesis of ABCD porphyrins and are potential synthons for supramolecular materials requiring specific substituent orientations
A silicon analog of quinolizidine 3,3,7,7-tetramethylhexahydro-1H-[1,4,2]oxazasilino[4,5-d][1,4,2]oxazasilin-9a-yl)methanol 3 was synthesized. X-ray diffraction analysis confirmed the trans configuration and low temperature NMR spectroscopy both the flexibility (barrier of interconversion 5.8 kcal mol(-1)) and the conformational equilibrium (chair-chair and chair-twist conformers) of the compound. The relative stability of the different isomers/conformers of 3 was calculated also at the MP2/6-311G(d,p) level of theory. Intra- and intermolecular hydrogen bonding in 3 and the appropriate equilibrium between free and self-associated molecules was studied in solvents of different polarity. Both the N-methyl quaternary ammonium salt and the O-trimethylsilyl derivative of 3 could be obtained and their structure determined.
Tandem Claisen Rearrangement/6-endo Cyclization Approach to Allylated and Prenylated Chromones
(2015)
Allyl, dimethylallyl and prenyl ethers derived from o-acyl-phenols reacted upon microwave irradiation to form C-allylated or -prenylated chromone derivatives, depending on the substitution pattern of the arene and the allyl substituent. The reaction proceeds through a tandem Claisen rearrangement and 6-endo-trig or 6-endo-dig cyclization sequence. For prenyl ethers, the tandem sequence can be extended by a Cope rearrangement to furnish 6-prenylchromones. The method is potentially useful for the synthesis of natural products and drugs.
Metal-containing ionic liquids (ILs) are of interest for a variety of technical applications, e.g., particle synthesis and materials with magnetic or thermochromic properties. In this paper we report the synthesis of, and two structures for, some new tetrabromidocuprates(II) with several “onium” cations in comparison to the results of electron paramagnetic resonance (EPR) spectroscopic analyses. The sterically demanding cations were used to separate the paramagnetic Cu(II) ions for EPR measurements. The EPR hyperfine structure in the spectra of these new compounds is not resolved, due to the line broadening resulting from magnetic exchange between the still-incomplete separated paramagnetic Cu(II) centres. For the majority of compounds, the principal g values (g|| and gK) of the tensors could be determined and information on the structural changes in the [CuBr4]2- anions can be obtained. The complexes have high potential, e.g., as ionic liquids, as precursors for the synthesis of copper bromide particles, as catalytically active or paramagnetic ionic liquids.
Metal-containing ionic liquids (ILs) are of interest for a variety of technical applications, e.g., particle synthesis and materials with magnetic or thermochromic properties. In this paper we report the synthesis of, and two structures for, some new tetrabromidocuprates(II) with several "onium" cations in comparison to the results of electron paramagnetic resonance (EPR) spectroscopic analyses. The sterically demanding cations were used to separate the paramagnetic Cu(II) ions for EPR measurements. The EPR hyperfine structure in the spectra of these new compounds is not resolved, due to the line broadening resulting from magnetic exchange between the still-incomplete separated paramagnetic Cu(II) centres. For the majority of compounds, the principal g values (g|| and g(perpendicular to)) of the tensors could be determined and information on the structural changes in the [CuBr4](2-) anions can be obtained. The complexes have high potential, e.g., as ionic liquids, as precursors for the synthesis of copper bromide particles, as catalytically active or paramagnetic ionic liquids.
We present and discuss the results of crystallographic and electron paramagnetic resonance (EPR) spectroscopic analyses of five tetrachloridocuprate(II) complexes to supply a useful tool for the structural characterisation of the [CuCl4](2-) moiety in the liquid state, for example in ionic liquids, or in solution. Bis(benzyltriethylammonium)-, bis(trimethylphenylammonium)-, bis(ethyltriphenylphosphonium)-, bis(benzyltriphenylphosphonium)-, and bis(tetraphenylarsonium) tetrachloridocuprate(II) were synthesised and characterised by elemental, IR, EPR and X-ray analyses. The results of the crystallographic analyses show distorted tetrahedral coordination geometry of all [CuCl4](2-) anions in the five complexes and prove that all investigated complexes are stabilised by hydrogen bonds of different intensities. Despite the use of sterically demanding ammonium, phosphonium and arsonium cations to obtain the separation of the paramagnetic Cu(II) centres for EPR spectroscopy no hyperfine structure was observed in the EPR spectra but the principal values of the electron Zeeman tensor, g(parallel to) and g(perpendicular to), could be determined. With these EPR data and the crystallographic parameters we were able to carry out a correlation study to anticipate the structural situation of tetrachloridocuprates in different physical states. This correlation is in good agreement with DFT calculations.
Tetrahalidocuprates(II) show a high degree of structural flexibility. We present the results of crystallographic and electron paramagnetic resonance (EPR) spectroscopic analyses of four new tetrabromidocuprate(II) compounds and compare the results with previously reported data. The cations in the new compounds are the sterically demanding benzyltriphenylphosphonium, methyltriphenylphosphonium, tetraphenylphosphonium, and hexadecyltrimethylammonium ions; they were used to achieve a reasonable separation of the paramagnetic Cu(II) ions for EPR spectroscopy. X-Ray crystallography shows that in all four complexes the [CuBr4](2-) units have a distorted tetrahedral coordination geometry which is in agreement with DFT calculations. The EPR hyperfine structure was not resolved. This is due to the exchange broadening resulting from still incomplete separation of the paramagnetic Cu(II) centres. Nevertheless, the principal values of the electron Zeemann tensor (g(parallel to) and g(perpendicular to)) of the complexes could be determined. A correlation of structural (X-ray) parameters with the spin density at the copper centres (DFT) is well reflected in the EPR spectra of the bromidocuprates. This enables the correlation of X-ray and EPR parameters to predict the structure of tetrabromidocuprates in physical states other than the crystalline state. As a result, we provide a method to structurally characterize [CuBr4](2-) in, for example, ionic liquids or in solution, which has important implications for e.g. catalysis or materials science.
The crystal and molecular structures of sodium and barium complexes of dibenzo-24-crown-8 ether
(2006)
The sodium and barium isothiocyanate complexes of 6,7,9,10,12,13,20,21,23,24,26,27-dodecahydrodibenzo[b,n]- 1,4,7,10,13,16,19,22-octaoxacyclotetracosin (dibenzo-24-crown-8 ether = DB24C8) were synthesized and analyzed by X-ray diffraction. The sodium complex, [Na(DB24C8)(NCS)(H2O)] 1, crystallizes in the orthorhombic space group Fdd2 with 16 molecules in the unit cell. The coordination number of Na is 6 and the central ion is located in a distorted octahedric environment. Only four of the crown ether oxygen atoms are involved. The coordination polyhedron is completed by the isothiocanate anion and by a water molecule, which is stabilized by hydrogen bonds. The barium complex, [Ba(DB24C8)(NCS)(2)] 2, crystallizes in the trigonale space group P3(1)21 with 3 molecules in the unit cell. Crystallographic C-2 symmetry is observed for the complex. The coordination number of Ba is 10. Barium is coordinated with the eight oxygen atoms of the macrocyclic ligand and with two isothiocyanate anions. The absolute structure was estimated using the FLACK parameter
The new tetrathiacrown ethers maleonitrile-tetrathia-12-crown-4 (mn12S(4)) and maleonitrile-tetrathia-13-crown- 4 (mn13S(4)) have been prepared and characterised by X-ray crystallographic analysis. These crown ethers form 2:1, 3:2 and 1: 1 complexes with AgY (Y = BF4, PF6). The crystal structures of [Ag(mn12S(4))(2)]BF4 (3a), [Ag(mn13S(4))(2)]BF4 (4a) and [Ag-2(mn13S(4))(3)](PF6)(2) (6b) have been determined. Compound 3a contains the centrosymmetric sandwich complex cation [Ag(mn12S(4))(2)](+) where each mn12S(4) ligand is coordinated to the Ag centre in an endo manner through all four S atoms. The 2:1 complex [Ag(mn12S(4))(2)](+) is the first sandwich complex with a tetrathiacrown ether and the first complex with an octa(thioether) coordination sphere. The crystal structure of compound 4a also reveals a 2:1 complex. This complex, [Ag(mnl3S(4))(2)](+), exhibits a half-sandwich structure. One mn13S(4) ligand coordinates to Ag+ by all four S donor atoms and the other 13S(4) crown by only one S atom. Compound 6b contains a dinuclear Ag complex. The Ag complexes 3a,b-8a,b were also studied by electrospray ionisation mass spectrometry. Collision-induced dissociation (CID) was used to compare the relative stability of 2:1 complexes [AgL2]+ and 1:1 complexes [AgL](+) (L = mn12S(4), mn13S(4)). The C-13 NMR chemical shifts of 2:1 and 1:1 Ag complexes and their corresponding free ligands were also estimated and compared. The free energy of the barrier of ring inversion (Delta G(double dagger)) for [Ag(mn12S(4))(2)](+) was determined to be 64 kJmol(-1).
3,4-Dihydro-2-H-pyran and oxalyl chloride react, depending on the conditions, to keto esters, a pyran-3- carboxylic acid or derivatives thereof, or to an hitherto unknown bicyclic acetal containing a vinyl chloride moiety. The structure of the latter product has been unambiguously elucidated by single-crystal X-ray structure analysis. A mechanism for its formation is proposed.
Multinuclear dynamic NMR spectroscopy of 3,5-bis(trifluoromethylsulfonyl)-1,3,5-oxadiazinane (3) revealed the existence of two conformers with differently oriented CF3 groups with respect to the ring, and two dynamic processes: ring inversion and restricted rotation about the N-S bond. Two transition states connecting the two conformers and corresponding to clockwise and counterclockwise rotations about the N-S bond were found; the calculated activation barriers of about 12 kcal/mol are in excellent agreement with those measured experimentally for the related molecule 1,3,5-tris(trifluoromethylsulfonyl)-1,3,5-triazinane (1). X-ray analysis proved the existence of the symmetric isomer of 3, which is the minor isomer in solutions but the only one in the crystal due to packing effects. The normal Perlin effect (JCHax < JCHeq)observed for 2(6)-CH2 in 3, whereas the reversed Perlin effect was found for the 4-CH2 group in 3 as well as for all CH2 groups in 1 both experimentally and theoretically. The latter effect in compounds 1, 3, and 1- (methylsulfonyl)-3,5-bis(trifluoromethylsulfonyl)-1,3,5-triazinane (2) can be considered as a genuine reverse Perlin effect since larger values of 1JCH are observed for longer C-H bonds.
The title compound, bis(5-methylthio-1,2-dithiole-3-thione)-disulfide, was yielded for the first time as by- product of the reaction of nickel(II) and cobalt(II) ions with 5-methylthio-1,2-dithiole-3-thione-4-thiolate. The compound can be obtained directly by oxidation of the ammonium salt of the ligand. C8H6S10 forms three polymorphs: (I), which crystallizes in the orthorhombic space group P212121, (II) and (III), which crystallize in the monoclinic space groups P21/c and P21/n, respectively. The crystal and molecular structures are presented here. The determination of the absolute configuration of (I) indicated the P-helical enantiomer. In contrast to this, the crystals of (II) und (III) are racemic, containing P- and M-helical enantiomers. The polymorphs differ in the kind of skewing around the disulfide bond and of the positions of the both dithiole rings to the S-S-moiety
Herein, an approach via combination of confined porous textures and reversible deactivation radical polymerization techniques is proposed to advance synthetic polymer chemistry, i.e., a connection of metal-organic frameworks (MOFs) and activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP). Zn-2(benzene-1,4-dicarboxylate)2(1,4-diazabicyclo[2.2.2]-octane) [Zn-2(bdc)(2)(dabco)] is utilized as a reaction environment for polymerization of various methacrylate monomers (methyl, ethyl, benzyl, and isobornyl methacrylate) in a confined nanochannel, resulting in polymers with control over dispersity, end functionalities, and tacticity with respect to distinct molecular size. To refine and reconsolidate the compartmentation effect on polymer regularity, initiator-functionalized Zn MOF was synthesized via cocrystallization with an initiator-functionalized ligand, 2-(2-bromo-2-methylpropanamido)-1,4-benzenedicarboxylate (Brbdc), in different ratios (10%, 20%, and 50%). Through the embedded initiator, surface-initiated ARGET ATRP was directly initiated from the walls of the nanochannels. The obtained polymers had a high molecular weight up to 392 000. Moreover, a significant improvement in end-group functionality and stereocontrol was observed, entailing polymers with obvious increments in isotacticity. The results highlight a combination of MOFs and ATRP that is a promising and universal methodology to prepare various polymers with high molecular weight exhibiting well-defined uniformity in chain length and microstructure as well as the preserved chain-end functionality.
Cadmium(II) based 2D coordination polymer [Cd(L1)(2)(DMF)(2)] (1) (L1 = 4,5-dicyano-2-methylimidazolate, DMF = N,N'-dimethylformamide) and 2D cobalt(II)-imidazolate framework [Co(L3)(4)] (2) (L3 = 4,5-diamide-2-ethoxyimidazolate) were synthesized under solvothermal reaction conditions. The materials were characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis, powder X-ray diffraction measurement (PXRD) and single-crystal X-ray diffraction. Compound 1 has hexacoordinate Cd-II ions and forms a zigzag chain-like coordination polymer structure, whereas compound 2 exhibits a 2D square grid type structure. The thermal stability analysis reveals that 2 showed an exceptional thermal stability up to 360 degrees C. Also, 2 maintained its fully crystalline integrity in boiling water as confirmed by PXRD. The solid state luminescent property of 1 was not observed at room temperature. Compound 2 showed an independent high spin central Co-II atom.