Refine
Year of publication
Document Type
- Article (2197)
- Doctoral Thesis (346)
- Postprint (225)
- Review (30)
- Other (26)
- Monograph/Edited Volume (13)
- Conference Proceeding (13)
- Habilitation Thesis (13)
- Preprint (7)
- Part of a Book (1)
Language
- English (2872) (remove)
Keywords
- nanoparticles (28)
- self-assembly (22)
- DNA origami (19)
- Nanopartikel (19)
- biomaterials (19)
- Conformational analysis (14)
- block copolymers (14)
- ionic liquids (14)
- SERS (13)
- fluorescence (13)
Institute
- Institut für Chemie (2872) (remove)
Quantum chemical calculations of various azobenzene (AB) derivatives have been carried out with the goal to describe the energetics and kinetics of their thermal cis -> trans isomerization. The effects of substituents, in particular their type, number, and positioning, on activation energies have been systematically studied with the ultimate goal to tailor the switching process. Trends observed for mono- and disubstituted species are discussed. A polarizable continuum model is used to study, in an approximate fashion, the cis -> trans isomerization of azobenzenes in solution. The nature of the transition state(s) and its dependence on substituents and the environment is discussed. In particular for push-pull azobenzenes, the reaction mechanism is found to change from inversion in nonpolar solvents to rotation in polar solvents. Concerning kinetics, calculations based on the Eyring transition state theory give usually reliable activation energies and enthalpies when compared to experimentally determined values. Also, trends in the resulting rate constants are correct. Other computed properties such as activation entropies and thus preexponential rate factors are in only moderate agreement with experiment.
Di-nor-benzofuran neolignan aldehydes, Delta(7)-3,4-methylenedioxy-3'-methoxy-8',9'-dinor- 4',7-epoxy-8,3'-neolignan-7'-aldehyde (ocophyllal A) 1, Delta(7)-3,4,5,3'-tetramethoxy- 8',9'-dinor-4',7-epoxy-8,3'-neolignan-7'-aldehyde (ocophyllal B) 2, and macrophyllin-type bicyclo[3.2.1]octanoid neolignans (7R, 8R, 3'S, 4'S, 5'R)-Delta(8)'-4'-hydroxy-5'- methoxy-3,4-methylenedioxy-2',3'.4',5'-tetrahydro-2'-oxo-7.3',8.5'-neolignan (ocophyllol A) 3, (7R, 8R, 3'S, 4'S, 5'R)-Delta 8'-4'-hydroxy-3,4,5'-trimethoxy- 2',3',4',5'-tetrahydro-2'-oxo-7.3',8.5'-neolignan (ocophyllol B) 4, (7R, 8R, 3'S, 4'S, 5'R)-Delta(8)'-4'-hydroxy-3,4,5,5'-tetramethoxy- 2',3',4',5'-tetrahydro-2'-oxo-7.3',8.5'-neolignan (ocophyllol C) 5, as well as 2'-epi-guianin 6 and (+)-licarin B 7, were isolated and characterized from leaves of Ocotea macrophylla (Lauraceae). The structures and configuration of these compounds were determined by extensive spectroscopic analyses. Inhibition of platelet activating factor (PAF)-induced aggregation of rabbit platelets were tested with neolignans 1-7. Although compound 6 was the most potent PAF-antagonist, compounds 3-5 showed some activity.
Macrophyllin-type bicyclo[3.2.1]octanoid neolignans from the leaves of Pleurothyrium cinereum
(2009)
Four new macrophyllin-type bicyclo[3.2.1]octanoid neolignans, (7S,8R,3'S,5'R)-Delta(8')- 5,5',3'-trimethoxy-3,4-methylenedioxy-2',3',4',5'-tetrahydro-2',4'-dioxo- 7.3',8.5'-neolignan (cinerin A), 1, (7R,8R,3'S,4'R,5'R)-Delta(8')-4'-hydroxy- 5,5'-dimethoxy-3,4-methylenedioxy-2',3',4',5'-tetrahydro-2'-oxo- 7.3',8.5'-neolignan (cinerin B), 2, (7S,8R,3'R,4'S,5'R)-Delta(8')-4'-hydroxy- 5,5',3'-trimethoxy-3,4-methylenedioxy-2',3',4',5'-tetrahydro-2'-oxo- 7.3',8.5'-neolignan (cinerin C), 3, and (7S,8R,2'RYS,5'R)-Delta(8')-2'-hydroxy- 5,5'-dimethoxy-3,4-methylenedioxy-2',3',4',5'-tetrahydro-4'-oxo- 7.3',8.5'-neolignan (cinerin D). 4, along with the known diterpene kaurenoic acid 5, were isolated from the leaves of Pleurothyrium cinercum. The structures and configuration of these compounds were determined by extensive spectroscopic analysis. Cinerins A-D (1-4) were tested for their inhibition efficacy of platelet activating factor (PAF)- induced aggregation of rabbit platelets. Compound 3 was the most potent PAF antagonist. Compounds 1-5 were tested against Mycobacterium tuberculosis (H(37)Rv strain) using the MABA method. Compound 5 induced 91.3% growth inhibition at 50 mu g mL(-1). Compounds 1-5 showed no significant inhibitory activity against some Gram-positive and Gram-negative bacteria by the agar-well diffusion method.
The anti-inflammatory potential of 26 neolignans (14 of the bicyclooctane-type and 12 of the benzofuran-type), isolated from three Lauraceae species (Pleurothyrium cinereum, Ocotea macrophylla and Nectandra amazonum), was evaluated in vitro through inhibition of COX-1, COX-2, 5-LOX and agonist-induced aggregation of rabbit platelets. Benzofuran neolignans were found to be selective COX-2 inhibitors, whereas bicyclooctane neolignans inhibit selectively the PAF- action as well as COX-1 and 5-LOX. The neolignan 9-nor-7,8-dehydro-isolicarin B 15 and cinerin C 7 were found to be the most potent COX-2 inhibitor and PAF-antagonist, respectively. Nectamazin C 10 exhibited dual 5-LOX/COX-2 inhibition.
In this paper, we describe our synthesis of four key building blocks for the total synthesis of psymberin (1) and its C4 epimer (2). Despite early difficulties in processing material to the advanced intermediate stage, we have been successful in developing high-yielding syntheses for the pyran core, natural side chain, 4-epi side chain, and aryl fragments of the molecule. Our findings from the optimization process are presented herein.
The generation of nanoscale primary poly(vinylidene fluoride) (PVDF) particles by rapid expansion of supercritical solutions (RESS) is reported. The experimental results show that RESS enables the formation of PVDF particles with median particle diameters ranging from 56 to 226 nm and that the size of PVDF particles can be influenced by polymer properties. The particle size can be decreased either by increasing molar mass, in case of identical polymer end groups, or by increasing the degree of crystallinity, in case of similar molar mass and different end groups.
A set of structures encompassing 1-(9-acridinyl)thiosemicarbazide and its 2-methyl derivative together with their various tautomeric structures; the 5-membered ring 1,3-thiazolidin-4-one products resulting from the reaction of 1- (9-acridinyl)thiosemicarbazide and its 2-methyl derivative with dimethyl acetylenedicarboxylate (DMAD) together with the alternative 6-membered ring isomeric reaction products as well as other potential isomeric structures; and the 6- membered ring 1,3-thiazin-4-one product resulting from the reaction of 2-methyl-1-(9-acridinyl)thiosemicarbazide with methyl propiolate (MP) together with the alternative 5-membered ring isomeric reaction product were all extensively studied by molecular modeling calculations using DFT at the B3LYP/6-31G(d,p) level of theory. The ring-chain tautomerism of the thiosemicarbazides, the regio- and stereoselectivity of the reactions, the adopted conformations and E/Z configurations of the products, the prototropic tautomerism of all the compounds, and the reasons for the predominance of the s-cis conformation of the Z configuration of the 1,3-thiazolidin-4-one product in particular were all extensively analyzed. Comparison of the modeled structures were also made to the 1,3-thiazolidin-4-one and 1,3-thiazin-4-one structures of the methyl derivative as well as 1-(9-acridinyl)thiosemicarbazide available from X-ray crystallographic analysis. Tactics utilizing spectroscopic methods {1R frequencies (nu) and NMR chemical shifts (delta), scalar coupling constants (J), and NOEs (eta)} in conjunction with molecular modeling calculations of the spectral parameters (frequency calculations (v) and NMR 6 using the GIAO method and J by calculation of the Fermi contact term) were evaluated in terms of proving 5- or 6-membered ring formation.
Six new bifunctional bis(trithiocarbonate)s were explored as RAFT agents for synthesizing amphiphilic triblock copolymers ABA and BAB, with hydrophilic "A" blocks made from N-isopropylacrylamide and hydrophobic "B" blocks made from styrene. Whereas the extension of poly(N-isopropylacrylamide) by styrene was not effective, polystyrene macroRAFT agents provided the block copolymers efficiently. End group analysis by H-1 NMR spectroscopy supported molar mass analysis and revealed an unexpected side reaction for certain bis(trithiocarbonate)s, namely a fragmentation to simple trithiocarbonates while extruding ethylene-trithiocarbonate. The amphiphilic block copolymers with short polystyrene blocks are directly soluble in water and self-organize into thermo-responsive micellar aggregates.
The influence of the reaction medium (organic solvents, water, ionic liquids, supercritical CO2) on the propagation rate in radical polymerizations has very different causes, e.g., hindered rotational modes, hydrogen bonding or electron pair donor/acceptor interactions. Depending on the origin of the solvent influence propagation rate coefficients, k(P), may be enhanced by up to an order of magnitude associated with changes in the pre-exponential or the activation energy of k(P). In contrast, non-specific interactions, size and steric effects lead to rather small changes in the vicinity of the radical chain end and are reflected by modest variations in k(P).
An efficient route from myo- to neo-inositol is described. The key steps of the sequence are oxidation of the hydroxy group at C-5 to the corresponding ketone, followed by a highly (dr = 7.8:1) stereoselective reduction. The route includes nine steps with an overall yield of 51% and is therefore superior to all hitherto reported methods for the preparation of neo-inositol.
Polymer libraries offer straightforward opportunities for the investigation of structure property relationships and for a more thorough understanding of certain research problems. Furthermore, if combined with high-throughput methods for their preparation as well as screening, they offer the additional advantage of time savings and/or the reduction of experimental efforts. Thus, the herein discussed methods of polymer library preparation and selected literature examples of polymer libraries describe efficient and state-of-the-art methods to tackle difficult research challenges in polymer and materials science.
Swelling and switching kinetics of gold coated end-capped poly(N-isopropylacrylamide) thin films
(2010)
Thin thermoresponsive hydrogel films of poly(N-isopropylacrylamide) end-capped with n-butyltrithiocarbonate(nbc- PNIPAM) oil si I icon supports with a gold layer on top, causing an asymmetric confinement, are investigated. For two different gold layer thicknesses (nominally 0.4 and 5 rim), the swelling and switching kinetics are probed with in situ neutron reflectivity. With a temperature jump from 23 to 40 degrees C the film is switched from a swollen into a collapsed state. For the thin gold layer this switching is faster as compared to the thick gold layer. The switching is a two-step process of water release and a subsequent structural relaxation. fit swelling and deswelling cycles, aging of the films is probed. After five cycles, the film exhibits enhanced water storage capacity. Grazing-incidence small-angle X-ray scattering (GISAXS) shows that these gold coated nbc-PNIPAM films do not age with respect to the inner structure but slightly roughen at the gold surface. As revealed by atomic force microscopy, the morphology of the gold layer is changed by the water uptake and release.
The surface of carbon black (CB) nanoparticles was functionalized with poly(vinylidene fluoride) (PVDF) either by trapping of macroradicals or by cycloaddition. PVDF with two iodine end groups (I-PVDF-I) obtained from iodine transfer polymerization in supercritical CO2 was heated in the presence of CB and the C-I bond was cleaved resulting in a reaction between the macroradical and the CB surface. To allow for cycloaddition of PVDF to the CB surface for a number of polymers, the iodine end groups were replaced by azide end groups. In addition, microwave irradiation was applied to the functionalization. The influence of temperature, time, polymer concentration, and polymer molar mass on the functionalization reaction was examined.
Recently, we introduced a thermoresponsive copolymer that consists of oligo(ethylene glycol) methacrylate (OEGMA) and 2-(2- methoxyethoxy) ethyl methacrylate (MEO(2)MA). The polymer exhibited an LCST at 35 degrees C in PBS buffer and was anchored onto gold substrates using disulfide polymerisation initiators. It allows the noninvasive detachment of adherent cells from their substrate. As the mechanisms that determine the interaction of cells with such polymers are not well understood, we employed Total Internal Reflection Fluorescence (TIRF) microscopy in order to monitor the detachment process of cells of two different types. We identified contact area and average cell-substrate distance as crucial parameters for the evaluation of the detachment process. The sensitivity of TIRF microscopy allowed us to correlate the specific adhesion pattern of MCF-7 breast cancer cells with the morphology of cell deposits that may serve as fingerprints for a nondestructive characterisation of live cells.
Thiol-ene additions of methyl 10-undecenoate, a castor oil derived renewable platform chemical, were studied with the goal of preparing a set of renewable monomers. Good to excellent yields were obtained for these solvent and initiator free thiol-ene additions. The resulting monomers were then polymerized using TBD as a catalyst, to linear as well as hyperbranched polyesters that also contain thio-ether linkages. All thus prepared polymers were fully characterized (NMR, GPC, DSC, and TGA) and the results of these investigations will be discussed within this contribution. The thermal analysis of these polymers revealed melting points in the range from 50 to 71 degrees C. Moreover, no significant weight loss was observed below 300 degrees C.
Gelatin is a non-immunogenic and degradable biopolymer, which is widely applied in the biomedical field e. g. for drug capsules or as absorbable hemostats. However, gelatin materials present limited and hardly reproducible mechanical properties especially in aqueous systems, particularly caused by the uncontrollable partial renaturation of collagen-like triple helices. Therefore, mechanically demanding applications for gelatin-based materials, such as vascular patches, i.e. hydrogel films that seal large incisions in vessel walls, and for induced autoregeneration, are basically excluded if this challenge is not addressed. Through the synthesis of a defined chemical network of gelatin with hexamethylene diisocyanate (HDI) in DMSO, the self-organization of gelatin chains could be hindered and amorphous gelatin films were successfully prepared having Young's moduli of 60-530 kPa. Transferring the crosslinking reaction with HDI and, alternatively, ethyl lysine diisocyanate (LDI), to water as reaction medium allowed the tailoring of swelling behaviour and mechanical properties by variation of crosslinker content while suppressing the formation of helices. The hydrogels had Young's moduli of 70-740 kPa, compressive moduli of 16-48 kPa, and degrees of swelling of 300-800 vol%. Test reactions investigated by ESI mass spectrometry allowed the identification and quantification of reaction products of the crosslinking reaction. The HDI crosslinked networks were stabilized by direct covalent crosslinks (ca. 10 mol%), supported by grafting (50 mol%) and blending of hydrophobic oligomeric chains. For the LDI- based networks, less crosslinked (3 mol%) and grafted species (5 mol%) and much higher amounts of oligomers were observed. The adjustable hydrogel system enables the application of gelatin-based materials in physiological environments.
We present a systematic study of the influence of energy and phase relaxation on dynamic polarizability simulations in the linear response regime. The nonperturbative approach is based on explicit electron dynamics using short laser pulses of low intensities. To include environmental effects on the property calculation, we use the time- dependent configuration-interaction method in its reduced density matrix formulation. Both energy dissipation and nonlocal pure dephasing are included. The explicit treatment of time-resolved electron dynamics gives access to the phase shift between the electric field and the induced dipole moment, which can be used to define a useful uncertainty measure for the dynamic polarizability. The nonperturbative treatment is compared to perturbation theory expressions, as applied to a simple model system, the rigid H-2 molecule. It is shown that both approaches are equivalent for low field intensities, but the time-dependent treatment provides complementary information on the phase of the induced dipole moment, which allows for the definition of an uncertainty associated with the computation of the dynamic polarizability in the linear response regime.
Zeolites NaY and ZSM-5 were used as hosts for styrene polymerization after ion-exchange with europium ions. The parent and hybrid, polystyrene coated Eu-NaY (Eu-NaY/PS) and Eu-ZSM-5 (Eu-ZSM-5/PS) zeolites were investigated by using thermal analysis, SEM, PXRD, FT-IR, DR-UV/Vis, steady state and time-resolved photoluminescence spectroscopy. FT-IR spectra evidenced for the interaction between the zeolitic hosts and polystyrene while the PXRD spectra supported for the presence of the polymer inside the channels/pores of Eu-NaY/PS and Eu-ZSM-5/PS materials. The optical properties of Eu-NaY/PS and Eu-ZSM-5/PS were significantly changed relative to those of the parent zeolites, giving further evidence for the presence of polymer inside zeolites. An interesting case is presented by NaY zeolite: following styrene polymerization, the polymer interacted selectively with one of the two main species co-existing inside zeolite while for ZSM-5 a similar effect was not observed.
Two different types of mesoporous silicon-phosphate supports using different surfactants (a mixture of (CH3)(3)C13H27NBr with an organophosphorus coupling molecule (HO-PO(i-C3H7)(2)) and with a co-surfactant ((C2H5)(3)(C6H5)PCl), respectively) were synthesized. Trivalent europium (Eu) ions were immobilized via ion-exchange on these supports. The resulting materials were characterized using nitrogen adsorption isotherms at -196 degrees C, thermogravimetric analysis, SEM, TEM, FT-IR, PXRD, CP/MAS. (HSi)-H-1-Si-29 and P-31 NMR, DR-UV-vis as well as steady- state and time-resolved photoluminescence spectroscopy. The results evidenced that the co-polymerization of silicon and phosphorous yielded a unique morphology in these materials. Following calcination at 450 and 900 degrees C europium- exchanged silicon-phosphates with great surface area (BET=600-705 m(2) g(-1)) and 3.4 nm sized mesopores were obtained. The differences among the optical properties of the non-calcined europium materials such as the emission lifetimes, local environment at the europium sites or the relative contribution of the upper excited levels to the total photoluminescence were assigned to the surfactants used in the synthesis. Calcination of the silicon-phosphates at higher temperatures than 450 degrees C did not induce major changes in the structural properties: in contrast, photoluminescence properties of europium were markedly improved in terms of intensity and average lifetime.
The stable 2,2,6,6-tetramethylpiperidine-1-yloxyl and its derivatives with hydrogen-bond-forming (-OH, -OSO3H), anionic (-OSO3- bearing K+ or [K(18-crown-6)](+) as counter ion), or cationic (-N+-(CH3)(3) bearing I-, BF4-, PF6- or N- (SO2CF3)(2) as counter ion) substituents are investigated in 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide over a wide temperature range. The temperature dependence of the viscosity of the ionic liquid is well described by the Vogel-Fulcher-Tammann equation. Interestingly, the temperature dependence of the rotational correlation time of the spin probes substituted with either a hydrogen-bond-forming group or an ionic substituent can be described using the Stokes-Einstein equation. In contrast, the temperature dependence of the rotational correlation time of the spin probe without an additional substituent at the 4-position to the nitroxyl group does not follow this trend. The activation energy for the mobility of the unsubstituted spin probe, determined from an Arrhenius plot of the spin-probe mobility in the ionic liquid above the melting temperature, is comparable with the activation energy for the viscous flow of the ionic liquid, but is higher for spin probes bearing an additional substituent at the 4-position. Quantum chemical calculations of the spin probes using the 6-31G+d method give information about the rotational volume of the spin probes and the spin density at the nitrogen atom of the radical structure as a function of the substituent at the spin probes in the presence and absence of a counter ion. The results of these calculations help in understanding the effect of the additional substituent on the experimentally determined isotropic hyperfine coupling constant.
The influence of the alkyl chain length in 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonylimide)s is studied to explore the rotation of piperidine-1-yloxyl derivatives substituted with either hydrogen bonding hydroxy group or ionic substituents, such as the cationic trimethylammonium or the anionic sulfate group placed at the 4 position. Structural variation of the ionic liquids results in differences of their viscosity influencing the rotation of the spin probes. The size of the average rotational correlation times of the spin probes dissolved in the ionic liquids depends further on the additional substituent in 4-position at these spin probes. The rotational correlation time exhibits a linear dependence on the ionic liquid viscosity in the case of the spin probe forming hydrogen bonding with the ionic liquids. In contrast to this, a deviation from the Stokes-Einstein behavior is found in the case of rotation of the charged spin probes in the 1-alkyl-3-methylimidazolium bis( trifluoromethylsulfonylimide) s substituted with a longer alkyl chain. This effect may be explained by phase separation on a molecular level between the charged part of the ionic liquid and the longer alkyl chains bound at the imidazolium ion. Although the neutral and the cationic spin probes show only a slight dependence between ionic liquid structure variation and the hyperfine coupling constants, structural effects cause changes in the hyperfine coupling constants in the case of the anionic spin probes. These probes strongly interact with the imidazolium ion.
New spin probes bearing the 2,2,6,6-tetramethylpiperidine-1-yloxyl covalently bound to the imidazolium ion via a methylene spacer and an amide group are synthesized. If the anion is bis(trifluoromethylsulfonylimide) instead of iodide, the new spin probe has a similar structure as that of an ionic liquid. Nevertheless, the new spin probes are useful tools to investigate ionic liquids.
The polarity of 1-alkyl-3-methylimidazolium-based ionic liquids containing hexafluorophosphate, tetrafluoroborate, dicyanoimide, or bis(trifluoromethanesulfonyl) imide as anions and a variation of the alkyl-chain length of the cation are investigated by both solvatochromic dyes and spin probes. Two different polarity scales are used for discussion of the polarity of these ionic liquids. These polarity scales are the empirical Kamlet-Taft parameters alpha, beta, and pi* and the hyperfine coupling constants A(iso)(N-14) obtained for spin probes substituted either with an ammonio or a sulfate group at 4-position. The results show that both polarity scales are valid for description of the ionic liquid polarity although differences are found between the two polarity scales. The most clear trend is found in all ionic liquids investigated for the hydrogen-bond accepting ability (beta) and the hyperfine- coupling constant of the anionic spin probe, where both parameters increase for all ionic liquids investigated until an alkyl chain length of eight carbon atoms and keep constant at longer alkyl chains.
Linear amphiphilic diblock and ternary triblock copolymers were synthesized by the RAFT method in three Successive Steps, using oligo(ethylene oxide) monomethyl ether acrylate, butyl or 2-ethylhexyl acrylate, and 1H, 1H, 2H, 2H-perfluorodecyl acrylate. The diblock and the triblock copolymers, which consist of a hydrophilic, a lipophilic, and a fluorophilic block, self-assemble in water into spherical micellar aggregates. Imaging by cryogenic transmission electron microscopy (cryo-TEM) revealed that the cores of the micellar aggregates made from these "triphilic" copolymers undergo local phase separation to form various ultrastructures, which depend sensitivity on the given block sequence. While the sequence hydrophilic-lipophilic-fluorophilic resulted in multicompartment cores with core-shell-corona morphology, the sequence lipophilic-hydrophilic-fluorophilic provided new "patched double micelle" and larger "soccer ball" structures.
Individual rate coefficients for 1H,1H,2H,2H-tridecafluorooctyl methacrylate radical polymerizations
(2010)
Kinetic data for radical polymerizations of 1H,1H,2H,2H-tridecafluorooctyl methacrylate (TDFOMA) in bulk is reported. Pulsed laser initiated polymerizations yield propagation rate coefficients, k(p), which are by a factor of 1.9 higher than methyl methacrylate k(p). The activation energy of TDFOMA k(p) is not significantly different from that of alkyl methacrylates. Chain-length averaged termination rate coefficients were estimated from chemically initiated polymerizations with in-line FT-NIR spectroscopic monitoring of monomer conversion. Up to 30% of monomer conversion TDFOMA termination rate coefficients are only slightly below MMA low conversion values. The result is suggested to be due to less interactions between the macroradicals compared to nonfluorinated systems.
Considerable progress has been made in recent years in the search for synthetic methods leading to functionalized porphyrins, especially for modification of either the beta- or meso positions. For the latter, total synthesis based on condensation methods or partial synthesis through functionalization of preformed porphyrin have emerged as possible methods. The increasing number of possible technical and medicinal applications for unsymmetrically meso-substituted porphyrins requires straightforward methods for the preparation of the so-called ABCD-porphyrins, i.e., porphyrins with up to four different meso substituents. Here, we describe new strategies for the synthesis of ABCD-type porphyrins based on porphyrin reactions with organolithium reagents and the use of Pd-catalyzed coupling reactions. With the whole repertoire of contemporary functionalization methods, a comprehensive analysis and comparison of the various strategies for A-, AB-, A(2)B-, ABC-, A(2)BC- and ABCD-type porphyrins is given. In addition, we report on the synthesis of new functionalized derivatives for some of these porphyrin classes. In practical terms and taking an applied-science- oriented approach, the synthesis of unsymmetrically meso-substituted porphyrins is best accomplished by a combination of well-developed condensation methods with subsequent functionalization. by organolithium compounds or transition-metal- catalyzed coupling protocols. The methods described are suitable for the preparation of porphyrins for many divergent applications ranging over amphiphilic porphyrins for photodynamic therapy, push-pull systems for optical applications and chiral systems useful in catalysis to donor-acceptor systems suitable for electron-transfer studies.
Fluoroionophores of fluorophore-spacer-receptor format were prepared for detection of PdCl2 by fluorescence enhancement. The fluorophore probes 1-13 consist of a fluorophore group, in alkyl spacer and a dithiomaleonitrile PdCl2 receptor. First, varying the length of the alkylene spacer (compounds 1-3) revealed, dominant through-space pathway for oxidative photoinduced electron transfer (PET) in CH2-bridged dithiomaleonitrile fluoroionophores. Second. fluorescent probes 4-9 containing two anthracene or pyrene fragments connected through CH2 bridges to the dithiomaleonitrile unit were synthesized. Modulation of the oxidation potential (E-Ox) through electron-withdrawing or -donating groups on the anthracene moiety regulates file thermodynamic driving force for oxidative PET (Delta G(PET)) in bis(anthrylmethylthio)maleonitriles and therefore the fluorescence quantum yields (Phi(f)), too. The new concept was confirmed and transferred to pyrenyl ligands, and fluorescence enhancements (FE) greater than 3.2 in the presence of PdCl2 were achieved by 7 and 8 (FE=5.4 and 5.2). Finally, for comparison, monofluorophore ligands 10-13 were synthesized.
Near edge X-ray absorption. ne structure and X-ray photoelectron spectroscopy have been employed to follow the reversible trans to cis isomerization of tetra-tert-butyl-azobenzene (TBA) adsorbed on Au(111). For one monolayer the molecules adopt an adsorption geometry characteristic of the trans-TBA isomer. The azo-bridge (N = N) is aligned nearly parallel to the surface and the phenyl rings exhibit a planar orientation with a small tilt angle <= 4 degrees with respect to the surface normal. Illumination of the molecular layer at 455 nm triggers the trans to cis isomerization which is associated with a pronounced change of the geometrical and electronic structure. The N1s to pi* transition of the central azo-bridge shifts by 0.45 +/- 0.05 eV to higher photon energy and the transition dipole moment (TDM) is tilted by 59 +/- 5 degrees with respect to the surface normal. The pi-system of one phenyl ring is tilted by about 30 degrees with respect to the surface normal, while the second ring plane is oriented nearly perpendicular to the surface. This reorientation is supported by a shift and broadening of the C-H resonances associated with the tert-butyl legs of the molecule. These findings support a configuration of the photo-switched TBA molecule on Au(111) which is comparable to the cis-isomer of the free molecule. In the photo-stationary state 53 +/- 5% of the TBA molecules are switched to the cis configuration. Thermal activation induces the back reaction to trans-TBA.
Amphiphilic dual brush block copolymers as "giant surfactants" and their aqueous self-assembly
(2010)
Amphiphilic dual brush diblock as well as symmetrical triblock polymers were synthesized by the overlay of the reversible addition-fragmentation chain transfer and the nitroxide mediated polymerization (NMP) techniques. While poly(ethylene glycol) brushes served as hydrophilic block, the hydrophobic block was made of polystyrene brushes. The resulting "giant surfactants" correspond structurally to the established amphiphilic diblock and triblock copolymer known as macrosurfactants. The aggregation behavior of the novel "giant surfactants" in aqueous solution was studied by dynamic light scattering, small-angle neutron scattering (SANS), and small-angle X-ray scattering (SAXS) over a large range in reciprocal space. Further, the self-assembled aggregates Were investigated by scanning force microscopy (SFM) after deposition on differently functionalized ultraflat solid substrates. Despite the high fraction of hydrophobic segments, the polymers form stable mesoscopic, spherical aggregates with hydrodynamic diameters in the range of 150-350 nm. Though prepared from well-defined individual polymers, the aggregates show several similarities to hard core latexes. They are stable enough to he deposited without much changes onto surfaces, where they cluster and show Spontaneous sorting according to their size within the clusters, with the larger aggregates being in the center.
Ribulose 1,5-bisphosphate carboxylase/oxygenase (RuBisCO) is the key enzyme of the Calvin cycle, catalyzing the fixation of inorganic carbon dioxide to organic sugars. Unlike most enzymes, RuBisCO is extremely slow, substrate unspecific, and catalyzes undesired side-reactions, which are considered to be responsible for the slow deactivation observed in vitro, a phenomenon known as fallover. Despite the fact that amino acid sequences and the 3D structures of RuBisCO from a variety of species are known, the precise molecular mechanisms for the various side reactions are still unclear. In the present study, we investigate the kinetic properties of RuBisCO using mathematical models. Initially, we formulate a minimal model that quantitatively reflects the kinetic behavior of RuBisCOs from different organisms. By relating rate parameters for single molecular steps to experimentally determined K-m and V-max values, we can examine mechanistic differences among species. The minimal model further demonstrates that two inhibitor producing side reactions are sufficient to describe experimentally determined fallover kinetics. To explain the observed kinetics of the limited capacity of RuBisCO to accept xylulose 1,5-bisphosphate as substrate, the inclusion of other side reactions is necessary. Our model results suggest a yet undescribed alternative enolization mechanism that is supported by the molecular structure. Taken together, the presented models serve as a theoretical framework to explain a wide range of observed kinetic properties of RuBisCOs derived from a variety of species. Thus, we can support hypotheses about molecular mechanisms and can systematically compare enzymes from different origins.
Smart bioactive surfaces
(2010)
The purpose of this highlight is to define the emerging field of bioactive surfaces. In recent years, various types of synthetic materials capable of "communicating'' with biological objects such as nucleic acids, proteins, polysaccharides, viruses, bacteria or living cells have been described in the literature. This novel area of research certainly goes beyond the traditional field of smart materials and includes different types of sophisticated interactions with biological entities, such as reversible adhesion, conformational control, biologically-triggered release and selective permeation. These novel materials may be 2D planar surfaces as well as colloidal objects or 3D scaffolds. Overall, they show great promise for numerous applications in biosciences and biotechnology. For instance, practical applications of bioactive surfaces in the fields of bioseparation, cell engineering, biochips and stem-cell differentiation are briefly discussed herein.
Both the structure and intramolecular flexibility of a series of aza crown ethers were studied by experimental NMR and theoretical molecular modeling. The stoichiometries of complexation to the anions H2PO4- and resulting complex stabilities were determined by experimental NMR (1H, 31P) titration and, in addition, the structure and mobility changes of the aza crown ethers upon complexation were also examined.
Optical methods play an important role in process analytical technologies (PAT). Four examples of optical process and quality sensing (OPQS) are presented, which are based on three important experimental techniques: near- infrared absorption, luminescence quenching, and a novel method, photon density wave (PDW) spectroscopy. These are used to evaluate four process and quality parameters related to beer brewing and polyurethane (PU) foaming processes: the ethanol content and the oxygen (O-2) content in beer, the biomass in a bioreactor, and the cellular structures of PU foam produced in a pilot production plant
Effects of frequency, predictability, and position of words on event-related potentials were assessed during word-by-word sentence reading in 48 subjects in an early and in a late time window corresponding to P200 and N400. Repeated measures multiple regression analyses revealed a P200 effect in the high-frequency range also the P200 was larger on words at the beginning and end of sentences than on words in the middle of sentences (i.e., a quadratic effect of word position). Predictability strongly affected the N400 component; the effect was stronger for low than for high- frequency words. The P200 frequency effect indicates that high-frequency words are lexically accessed very fast, independent of context information. Effects on the N400 suggest that predictability strongly moderates the late access especially of low-frequency words. Thus, contextual facilitation on the N400 appears to reflect both lexical and post- lexical stages of word recognition, questioning a strict classification into lexical and post-lexical processes.
A successful assignment for the fundamental bands observed in the experimental IR spectra of mn-12S(2)O(2) and fn-12S(2)O(2) dithiacrown ethers was achieved by the aid of the density functional theory (DFT) based quantum mechanical calculations carried out at the 133LYP/6-31G(d) and B3LYP/6-31 + G(d) level of theory. Two different scaling approaches, '(i) scaled quantum mechanics force field (SQM FF) methodology', and (ii) the 'scaling frequencies with dual empirical scale factors', were used in order to fit the calculated harmonic frequencies to the experimental ones. Potential energy distribution (PED) calculations were carried out to define the internal coordinate contributions to each normal mode and to define the corresponding normal modes of the molecules. The effects of the conformational differences onto the IR active normal modes of the two isomeric molecules and their corresponding experimental frequencies were discussed in the light of the calculated spectral data.
The acetone extracts of the root bark and stem bark of Erythrina sacleuxii showed antiplasmodial activities against the chloroquine-sensitive (D6) and chloroquine-resistant (W2) strains of Plasmodium falciparum. Chromatographic separation of the acetone extract of the root bark afforded a new isoflavone, 7-hydroxy-4 -methoxy-3'- prenylisoflavone (trivial name 5-deoxy-3' - prenylbiochanin A) along with known isoflavonoids as the antiplasmodial principles. Flavonoids and isoflavonoids isolated from the stem bark of E. sucleuxii were also tested and showed antiplasmodial activities. The structures were determined on the basis of spectroscopic evidence
4-Alkyl-2,2,6,6-tetramethyl-1,4,2,6-oxaazadisilinanes RN[CH2Si(Me)2]2O [R = Me (1), i-Pr (2)] were synthesized by two methods which provided good yields up to 84%. Low temperature NMR study of compounds (1) and (2) revealed a frozen ring inversion with the energy barriers of 8.5 and 7.7 kcal/mol at 163 and 143 K, respectively, which is substantially lower than that for their carbon analog, N-methylmorpholine. DFT calculations performed on the example of molecule (1) showed that N-Meax conformer to exist in the sofa conformation with the coplanar fragment C-Si-O-Si-C, and its N-Meeq conformer in a flattened chair conformation.
The micelle aggregation numbers (N-agg) of several series of cationic oligomeric surfactants were determined by time-resolved fluorescence quenching (TRFQ) experiments, using advantageously 9,10-dimethylanthracene as fluorophore. The study comprises six dimeric ("gemini"), three trimeric, and two tetrameric surfactants, which are quaternary ammonium chlorides, with medium length spacer groups (C-3-C-6) separating the individual surfactant fragments. Two standard cationic surfactants served as references. The number of hydrophobic chains making up a micellar core is relatively low for the oligomeric surfactants, the spacer length playing an important role. For the dimers, the number decreases from 32 to 21 with increasing spacer length. These numbers decrease further with increasing degree of oligomerization down to values of about 15. As for many conventional ionic surfactants, the micelles of all oligomers studied grow only slightly with the concentration, and they remain in the regime of small micelles up to concentrations of at least 3 wt %.
Dynamic NMR of 1-(methylsulfonyl)-3,5-bis(trifluoromethylsulfonyl)-1,3,5-triazinane reveals the existence of three conformers and two dynamic processes: ring inversion and rotation about the N-S bond, both processes having Delta G(double dagger) = 13.5 kcal/mol. An unprecedented large reverse Perlin effect (J(CHax) > J(CHeq)) was found experimentally and calculated theoretically.
The first conformational analysis of 3-silathiane and its C-substituted derivatives, namely, 3,3-dimethyl-3- silathiane 1, 2,3,3-trimethyl-3-silathiane 2, and 2-trimethylsilyl-3,3-dimethyl-3-silathiane 3 was performed by using dynamic NMR spectroscopy and B3LYP/6-311G(d,p) quantum chemical calculations. From coalescence temperatures, ring inversion barriers ;G; for 1 and 2 were estimated to be 6.3 and 6.8;kcal/mol, respectively. These values are considerably lower than that of thiacyclohexane (9.4;kcal/mol) but slightly higher than the one of 1,1- dimethylsilacyclohexane (5.5;kcal/mol). The conformational free energy for the methyl group in 2 (;;G°;=;0.35;kcal/mol) derived from low-temperature 13C NMR data is fairly consistent with the calculated value. For compound 2, theoretical calculations give ;E value close to zero for the equilibrium between the 2-Meax and 2-Meeq conformers. The calculated equatorial preference of the trimethylsilyl group in 3 is much more pronounced (;;G°;=;1.8;kcal/mol) and the predominance of the 3-SiMe3 eq conformer at room temperature was confirmed by the simulated 1H NMR and 2D NOESY spectra. The effect of the 2-substituent on the structural parameters of 2 and 3 is discussed.
The push-pull characters of a large series of donor-acceptor substituted azo dyesù71 structures in allùhave been quantified by the NN double bond lengths, dNN, the 15N NMR chemical shift differences, ;;15N, of the two nitrogen atoms and the quotient, ;*/;, of the occupations of the antibonding ;*, and bonding ; orbitals of this partial NN double bond. The excellent correlation of the occupation quotients with the bond lengths strongly infers that both ;*/; and dNN are excellent parameters for quantifying charge alternation in the push-pull chromophore and the molecular hyperpolarizability, ;0, of these compounds. By this approach, selected compounds can be appropriately considered as viable candidates for nonlinear optical (NLO) applications.
Identification of benzenoid and quinonoid structures by through-space NMR shieldings (TSNMRS)
(2010)
Porous silicon carbide monoliths were obtained using the infiltration of preformed SiO2 frameworks with appropriate carbon precursors such as mesophase pitch. The initial SiO2 monoliths possessed a hierarchical pore system, composed of an interpenetrating bicontinuous macropore structure and 13 nm mesopores confined in the macropore walls. After carbonization, further heat treatment at ca. 1400 degrees C resulted in the formation of a SiC-SiO2 composite, which was converted into a porous SiC monolith by post-treatment with ammonium fluoride solution. The resulting porous SiC featured high crystallinity, high chemical purity and showed a surface area of 280 m(2) g(-1) and a pore volume of 0.8 ml g(-1)
A new approach to analyze multi-component Saturation Transfer Difference (STD) NMR spectra by combining the STD and the DOSY experiment is proposed. The resulting pulse sequence was successfully used to simplify an exemplary multi- component protein/substrate system by means of standard DOSY processing methods. Furthermore, the same experiment could be applied to calculate the ratio of saturated substrate molecules and its saturation rate in the case of competitive interactions. This ratio depends on the strength of this interaction between the substrates and the protein, so that this kind of information could be extracted from the results of our experiment.
The through space NMR shieldings (TSNMRS) of dodecahedrane C20H20, of the isomeric hydrocarbons C20H12, of the ions C20H122+ and C20H122- of the fluxional fullerene C20 and of its dication C202+ have been ab initio calculated employing the NICS concept on basis of MP2/6-31G* geometries and visualized as iso-chemical-shielding/deshielding surfaces (ICSSs). TSNMRS values were employed to study the exohedral magnetic properties of the compounds studied. Hereby, the curved It-conjugation in the compounds studied could be quantified.
The clerodane diterpenoids trans-kolavenolic acid, 18-oxocleroda-3,13(E)-dien-15-oic acid, ent-(18- hydroxycarbonyl)-cleroda- 3,13(E)-dien-15-oate, 2-oxo-ent-cleroda-3,13(Z)-dien-15-oic acid and trans-2-oxo-ent-cleroda- 13(Z)-en-15-oic acid, and the chlorobenzenoid O-(3-hydroxy-4-hydroxycarbonyl-5-pentylphenyl)-3-chloro-4-methoxy-6-pentyl- 2-oxybenzoic acid were isolated from Tessmannia martiniana var pauloi and T. martiniana var matiniana. Structures were established based on interpretation of spectroscopic data. Some of the compounds exhibited significant antimosquito, antifungal and antibacterial activities.
Narrow channels with polar walls are the structural and functional features responsible for the high capacity of a zinc-organic framework based on an imidazolate-amide-imidate ligand for the uptake of H2 and CO2 (see structure: orange Zn, blue N, red O, dark gray C, light gray H). The rigid and stable chelating ligand was synthesized in situ by partial hydrolysis of a dicyanoimidazole compound.
Mono- and trans-1,4-dialkoxy substituted cyclohexanes (alkyl=Me, Et, i-Pr, t-Bu) were prepared using the solvomercuration-demercuration (SM-DM) procedure. The axialaxial and axial,axialequatorial, equatorial conformational equilibria of the products were studied by low temperature 1H and 13C NMR spectroscopy in CD2Cl2. The structures and relative energies of the participating conformers were calculated at both the B3LYP (6-311G*//6-311+G*) and MP2 (6-311+G*//6-311G*) levels of theory. In the case of DFT, good correlations of ;Gocalcd versus ;Goexptl were obtained. Both the structures and the energy differences of the conformers have been discussed with respect to established models of conformational analysis, viz. steric and hyperconjugative interactions. In addition, 1JH,C coupling constants were considered with respect to the hyperconjugation present.
Through space NMR shieldings of aromatic (benzene, mono-substituted and annelated benzenes, ferrocene, [14]- and [18]-annulenes, phenylenes and tetra- to heptahelicene) and anti-aromatic molecules (cyclobutadiene and pentalene) were assessed by ab initio molecular-orbital calculations. Employing the nucleus-independent chemical shifts (NICS) concept, these through space NMR shieldings were visualized as iso-chemical-shielding surfaces (ICSSs) and can be applied quantitatively to determine the stereochemistry of proximal nuclei. In addition, the distances in Å at ICSS values of ±0.1 ppm in-plane and perpendicular-to-center of the aromatic ring system were employed as a simple means to compare and estimate qualitatively the aromaticity of the systems at hand.
Heterochitooligosaccharides possess interesting biol. properties. Isobaric mixts. of such linear heterochitooligosaccharides can be obtained by chem. or enzymic degrdn. of chitosan. However, the sepn. of such mixts. is a challenging anal. problem which is so far unresolved. It is shown that these isobaric mixts. can be sequenced and quantified simultaneously using std. derivatization and multistage tandem mass spectrometric techniques. A linear ion trap mass spectrometer equipped with a vacuum matrix-assisted laser desorption ionization (vMALDI) source is used to perform MS2 as well as MS3 expts. [on SciFinder (R)].
Efficient triplet exciton emission has allowed improved operation of organic light-emitting diodes (LEDs). To enhance the device performance, it is necessary to understand what governs the motion of triplet excitons through the organic semiconductor. Here, we have investigated triplet diffusion using a model compound that has weak energetic disorder. The Dexter-type triplet energy transfer is found to be thermally activated down to a transition temperature T- T, below which the transfer rate is only weakly temperature dependent. We show that above the transition temperature, Dexter energy transfer can be described within the framework of Marcus theory. We suggest that below T-T, the nature of the transfer changes from phonon-assisted hopping to quantum-mechanical tunneling. The lower electron-phonon coupling and higher electronic coupling in the polymer compared to the monomer results in an enhanced triplet diffusion rate.
In this microreview we describe the principle of Forster resonance energy transfer (FRET) occurring between closely spaced energy-donor and -acceptor molecules. The theoretical treatment is depicted in relation with the data extractable from spectroscopic measurements. We present the specific case of semiconductor nanocrystals (or quantum dots QDs) as energy donors in FRET experiments and a particular emphasis is put on the specific advantages of these fluorophores with regard to both their exceptional photophysical properties and their nanoscopic morphology. In a following section, the special attributes of luminescent lanthanide complexes (LLCs) are outlined with illustrations of properties such as their characteristic emission spectra, long-lived luminescence, and large "Stokes shift". Finally, the successful combination of LLCs and QDs in FRET experiments is demonstrated, showing the unrivaled benefits of this singular marriage, opening doors for energy transfer at very large distances and excellent sensitivity of detection within the frame of time-resolved fluoroimmunoassays. ((C) Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2008).
First studies of electron transfer in [N]phenylenes were performed in bimolecular quenching reactions of angular [3]- and triangular [4]phenylene with various electron acceptors. The relation between the quenching rate constants k(q) and the free energy change of the electron transfer (Delta G(CS)(0)) could be described by the Rehm- Weller equation. From the experimental results, a reorganization energy lambda of 0.7 eV was derived. Intramolecular electron transfer reactions were studied in an [N]phenylene bichomophore and a corresponding reference compound. Fluorescence lifetime and quantum yield of the bichromophor display a characteristic dependence on the solvent polarity, whereas the corresponding values of the reference compound remain constant. From the results, a nearly isoenergonic charge separation process can be determined. As the triplet quantum yield is nearly independent of the polarity, charge recombination leads to the population of the triplet state.
Interactions of the antimicrobial peptide Arenicin with amphiphiles at planar and curved interfaces
(2010)
Regulation of respiration and fermentation to control the plant internal oxygen concentration
(2009)
Plant internal oxygen concentrations can drop well below ambient even when the plant grows under optimal conditions. Using pea (Pisum sativum) roots, we show how amenable respiration adapts to hypoxia to save oxygen when the oxygen availability decreases. The data cannot simply be explained by oxygen being limiting as substrate but indicate the existence of a regulatory mechanism, because the oxygen concentration at which the adaptive response is initiated is independent of the actual respiratory rate. Two phases can be discerned during the adaptive reaction: an initial linear decline of respiration is followed by a nonlinear inhibition in which the respiratory rate decreased progressively faster upon decreasing oxygen availability. In contrast to the cytochrome c pathway, the inhibition of the alternative oxidase pathway shows only the linear component of the adaptive response. Feeding pyruvate to the roots led to an increase of the oxygen consumption rate, which ultimately led to anoxia. The importance of balancing the in vivo pyruvate availability in the tissue was further investigated. Using various alcohol dehydrogenase knockout lines of Arabidopsis (Arabidopsis thaliana), it was shown that even under aerobic conditions, alcohol fermentation plays an important role in the control of the level of pyruvate in the tissue. Interestingly, alcohol fermentation appeared to be primarily induced by a drop in the energy status of the tissue rather than by a low oxygen concentration, indicating that sensing the energy status is an important component of optimizing plant metabolism to changes in the oxygen availability.
Due to depleting fossil resources, the ever increasing emission of greenhouse gases and toxic waste, as well as the inefficient utilization of our available resources, we have to implement the principles of green chemistry whenever and wherever possible. Plant oils are already the most important renewable resource for the chemical industry. Due to their inherent double-bond functionality, they offer the possibility of being transformed via several very efficient catalytic processes. Especially, new developments in olefin metathesis allow the chemist to directly polymerize or introduce a variety of functional groups to these renewable resources in an efficient manner. Therefore, olefin metathesis with plant-oil-derived fatty acids and their derivatives can contribute to a sustainable development of our future, since this approach has great potential for the substitution of currently used petrochemicals and a variety of value-added chemical intermediates, especially for the polymer industry, can be derived from these resources in a straightforward fashion. This contribution will address and discuss the most recent developments in this field of research.
The existence of intermolecular or intramolecular N···H;O or N;H···O hydrogen bonding in three series (series 1, substituted 1-aminoalkyl-2-naphthols: R = H, Me, Et, Pr, i-Pr; series 2, substituted 1-;- aminobenzyl-2-naphthols: H, p-OMe, p-F, p-Cl, p-Br, p-NO2, p-Me; series 3, substituted 2-;-aminobenzyl-1-naphthols: R = H, p-Me, p-F, p-Br, p-OMe, m-NO2, m-Br) are studied by NMR spectroscopy and computed at the DFT level of theory [B3LYP/6-311+G(d,p)]. The correct nature of the H-bond was assigned unequivocally both experimentally and computationally by potential energy scans rotating the involved dihedral angles. We investigated the effects of substituents on the strength of the H-bond by evaluating the corresponding hyperconjugative stabilization energy nlonepair ; ;*X;H and Hammett substituent constant plots. By this means, steric and electronic substituent effects could be easily quantified and separated.
Hyperpolarizability of donor-acceptor azines subject to push-pull character and steric hindrance
(2009)
The push-pull character of two series of donor-acceptor azines has been quantified by C-13, N-15 chemical shift differences of the partial C(1)=N(1) and N(2)=C(2) double bonds in the central linking C(1)=N(1)-N(2)=C(2) unit and by the quotient of the occupations of the bonding pi and anti-bonding pi* orbitals of these bonds. Excellent correlation of the latter push-pull parameter with the corresponding bond lengths d(C=N) strongly recommend both the occupation quotients pi*/pi and the corresponding bond lengths as reasonable sensors for quantifying the push, pull character along the C=N-N=C linking unit, for the donor-acceptor quality of the two series of azines and for the molecular hyperpolarizability beta(0) of these compounds. Within this context, reasonable conclusions concerning the interplay of steric hindrance in the chromophore, push-pull character and hyperpolarizability of the azines and their application as NLO materials will be drawn.
Two-photon fluorescence lifetime imaging of intracellular chloride in cockroach salivary glands
(2009)
Intermolecular hydrogen bonding, not hydrophobic interaction, is the driving force for the spontaneous self- assembly of glycosylated polyoxazoline chains into nanotubes in dilute aqueous solution. The structural information is encoded in the relatively simple molecular structure of chains consisting of a tertiary polyamide backbone (hydrogen- accepting) and glucose side chains (hydrogen-donating). The formation of the nanotubes should occur through bending and closing of a 2D hydrogen-bonded layer of interdigitated polymer chains.
Determination of micelle diffusion coefficients with fluorescence correlation spectroscopy (FCS)
(2009)
Background: There is an increased need to replace materials derived from fossil sources by renewables. Sugar- cane derived carbohydrates are very abundant in Brazil and are the cheapest sugars available in the market, with more than 400 million tons of sugarcane processed in the year 2007. The objective of this work was to study the prepn. of sugar acrylates from free sugars and free acrylic acid, thus avoiding the previous prepn. of protected sugar derivs., such as glycosides, or activated acrylates, such as vinyl acrylate. Results: Lipase catalyzed esterification of three mono- and two disaccharides with acrylic acid, in the presence or absence of mol. sieves was investigated. The reactions were monitored by high-performance liq. chromatog. (HPLC) and the products were analyzed by matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry. The main products are mono- and diacrylates, while higher esters are formed as minor products. The highest conversion to sugar acrylates was obsd. for the D-glucose and D- fructose, followed by D-xylose and D-maltose. Mol. sieves had no pronounced effect on the conversion. Conclusions: A feasible method is described to produce and to characterize sugar acrylates, including those contg. more than two acrylate groups. The process for prodn. of these higher esters could potentially be optimized further to produce mols. for crosslinking in acrylate polymn. and other applications. The direct enzymic esterification of free carbohydrates with acrylic acid is unprecedented. [on SciFinder (R)].
Structural and physicochem. characteristics of mesquite gum (from Prosopis velutina) were investigated using FT- IR spectroscopic, mass spectrometric and chromatog. methods. Four fractions (F-I, F-IIa, F-IIb and F-III) were isolated by hydrophobic interaction chromatog. The samples were characterized and analyzed for their monosaccharide and oligomers compn. by high performance anion-exchange chromatog. with pulsed amperometric detection (HPAEC-PAD). L-Arabinose (L-Ara) and D-galactose (D-Gal) were found as the main carbohydrate constituent residues in the polysaccharides from mesquite gum and their ratio (L-Ara/D-Gal) varied within the range 2.54 to 3.06 among the various fractions. Small amts. of D- glucose (D-Glc), D-mannose (D-Man) and D-xylose (D-Xyl) were also detected, particularly in Fractions IIa, IIb and III. IR spectroscopy identified polysaccharides and protein in all the samples. Data from mass spectrometry (MALDI-TOF MS) was consistent with the idea that the structure corresponding to the periphereal chains of Fraction I is predominantly a chain of pentoses attached to uronic acid. [on SciFinder (R)].
2,11-Dialkylated 1,12-diazaperylenes (alkyl = Me, Et, iPr) dmedap, detdap and dipdap have been synthesized by reductive cyclization of 3,3-dialkylated 1,1-biisoquinolines 3a-c, resulting in the first copper(I) complexes of a large- surface ligand. The new copper(I) complexes show low-energy MLCT absorptions unprecedented for bis(-diimin)copper(I) complexes. The solid structures of the complexes[Cu(dipdap)2]BF4·CH2Cl2·1.5H2O, [Cu(dipdap)2]OTf·CH2Cl2, [Cu(dipdap)2]I·C2H4Cl2·THF·2H2O, [Cu(dmedap)2]OTf and [Cu(dipdap)2]AQSO3·H2O (AQSO3 = sodium 9,10-dihydro-9,10-dioxo-2- anthracenesulfonate) are reported. In [Cu(dipdap)2]BF4·CH2Cl2·1.5H2O, each copper(I) complex cation interacts with two others by - stacking interactions forming a novel supramolecular column structural motif running along the crystallographic c axis. In the crystalline compound [Cu(dipdap)2]AQSO3·H2O, aggregation between two complex cations and two additional anions by - stacking interactions is observed, leading to a tetrameric assembly. Furthermore, the three complex compounds [Cu(L)2]BF4 (L = dmedap, detdap, dipdap) were tested for sensory applications in aqueous buffer solutions in electrochemical studies of the complex immobilized on glassy carbon electrodes.
Background & objectives: This paper reports the larvicidal activity of seventeen Tanzanian plant species against the malaria vector, Anopheles gambiae s.s. Giles larvae. Some of the plants are used traditionally as sources of insecticidal materials. Methods: The crude extracts from the leaves, stem and root barks of the investigated plants were obtained by solvent extraction and then bio-assayed following WHO protocols showed LC50 values 10 to 400 ppm after 24 h exposure. The structures were determined on interpretation of spectroscopic data. Results: The most active extracts were those from the stem and root barks of Annona squamosa, Uvaria faulknerae, U. kirkii and Uvariodendron pycnophyllum, all of which had LC50 values between 10 and 100 ppm. Long-term exposure beyond 24 h also showed more susceptibility of the larvae to the extracts. Larvae deformities by forming tail-like structures were observed for the methanol extracts of Tessmannia martiniana var pauloi. Interpretation & conclusion: The results suggest that the investigated plant extracts are promising as larvicides against An. gambiae s.s. Giles mosquitoes and could be useful leads in the search for new and biodegradable plant derived larvicide products.
A new pterocarpan (named 8-methoxyneorautenol) was isolated from the acetone ext. of the root bark of Erythrina abyssinica. In addn., the known isoflavonoid derivs. eryvarin L, erycristagallin and shinpterocarpin were identified for the first time from the roots of this plant. The structures were detd. on the basis of spectroscopic evidence. The new compd. showed selective antimicrobial activity against Trichophyton mentagrophytes. The acetone ext. of the root bark of E. abyssinica showed radical scavenging activity towards 2,2-diphenyl-1-picrylhydrazyl radical (DPPH). The pterocarpenes, 3-hydroxy-9-methoxy-10-(3,3-dimethylallyl)pterocarpene and erycristagallin, were the most active constituents of the roots of this plant and showing dose-dependent activities similar to that of the std. quercetin. [on SciFinder (R)]
Prototypes for homoaromaticity in cations, neutral molecules, and anions are theoretically studied at the MP2 level of theory. For the global minimum structures on the potential energy surface both 1H/13C chemical shifts and spatial magnetic properties as through space NMR shieldings (TSNMRS) were calculated by the GIAO perturbation method. The TSNMRS are visualized as iso-chemical-shielding surfaces (ICSS) of different sign and size. Coincident experimental and computed 1H/13C chemical shifts afforded the possibility to decide from the TSNMRSs at hand on both the existence and the size of homoaromaticity in the molecules studied.
The influence of the reaction medium (organic solvents, water, ionic liquids, supercritical CO2) on the propagation rate in radical polymerizations has very different causes, e.g., hindered rotational modes, hydrogen bonding, or electron pair donor / acceptor interactions. Depending on the origin of the solvent influence propagation rate coefficients, kp, may be enhanced by up to an order of magnitude associated with changes in the pre-exponential or the activation energy of kp. Contrary, non-specific interactions, size and steric effects lead to rather small changes in the vicinity of the radical chain end and are reflected by modest variations in kp.
Four new primary aminonaphthols (4, 5, 9 and 10) were synthesized from 1- or 2-naphthol and 1- or 2- naphthaldehyde via naphthoxazines in modified Mannich condensations. Simple ring-closure reactions of these aminonaphthols with paraformaldehyde, 4-nitrobenzaldehyde, phosgene or 4-chlorophenyl isothiocyanate led to new heterocyclic derivatives. In these transformations, either an sp2 or an sp3 carbon was inserted between the hydroxy and amino groups. The effects of substituents and the naphthyl ring on the conformation were investigated by means of NMR measurements, employing both dipolar and scalar couplings. The structures were confirmed by DFT quantum chemical calculations involving computed coupling constants, intramolecular distances between nuclei and the relative energies of the preferred conformers.
The theoretically possible stable conformers of free mn-15S2O3 maleonitrile-dithiacrown ether molecule were searched by means of a conformational study which consists of molecular dynamics and energy minimization calculations performed with MM2 force field and successive geometry optimization + frequency calculations performed first at B3LYP/3- 21G and then at B3LYP/6-31G(d) levels of theory. The obtained calculation results have clearly indicated that the free molecule in electronic ground state is very flexible and accordingly has many possible stable conformers of different conformational properties at room temperature; among them, the one having a macrocyclic ring structure in which all of the ether units oriented toward the center of the ring was determined the energetically most preferable conformer. In addition, the equilibrium geometrical parameters, vibrational normal modes and associated IR spectral data of the determined most stable three conformers of the molecule were calculated at B3LYP/6-31+G(d) and B3LYP/6-31++G(d,p) levels of theory. A successful assignment of the fundamental bands observed in the recorded experimental solid phase and solution phase IR spectra of the molecule was achieved in the light of the theoretical data obtained from these DFT calculations. To fit the calculated harmonic wavenumbers to the experimental ones, two different scaling procedures, referred to as "Scaled Quantum Mechanical Force Field (SQM FF) methodology" and "Scaling wavenumbers with empirical dual scale factors", were proceeded independently.
In ultra-low-temperature experiments at 4.7 K the luminescence of Eu(III) bound to different hydroxy- and methoxybenzoic acids and to humic substances (HS) was investigated. The benzoic acid derivatives were used as simple model compounds for common metal-binding structures in HS. The Eu(III) luminescence was directly excited by means of a pulsed dye laser, scanning through the D-5(0) -> F-7(0) transition of Eu(III) and subsequently, high-resolution total luminescence spectra (TLS) were recorded. Based on the thorough analysis of the high-resolution TLS conclusions were drawn with respect to the number of different complexes formed and to the symmetry of the complexes. The crystal-field strength parameter N-nu(B-2q) was dependent on the electrostatic forces induced by the ligands as well as on the symmetry of the complexes. The formation of thermodynamically stable complexes was found to be slow even for small model ligands such its 2-hydroxybenzoic acid. Comparison between the model compounds and HS clearly revealed that the carboxylate group is the dominant binding site in HS. Indices for the formation of chelates, e.g. similar to 2- hydroxybenzoic acid, were not found for HS.
The competition between REE, alkaline earth and d-transition metals for organic matter binding sites is still an open field of research; particularly, the mechanisms governing these phenomena need to be characterized in more detail. In this study, we examine spectroscopically the mechanisms of competitive binding of Eu(III)/Cu(II) and Eu(III)/ Ca(II) pair to Gorleben humic acid (HA), as previously proposed in the framework of the NICA-Donnan model. The evolution of time-resolved laser induced luminescence spectra of humic-complexed Eu(Ill) showed two strikingly different environments for a comparable bound proportion for Cu(II) and Ca(II). Cu(II) seems to compete more effectively with Eu(III) inducing its release into the Donnan phase, and into the bulk solution as free Eu3+. This is evidenced both by the shapes of the spectra and by the decrease in the luminescence decay times. In contrast with that, Ca(II) induces a modification of the HA structure, which enhances the luminescence of humic-bound Eu(III), and causes a minor modification of the chemical environment of the complexed rare earth ion.
Advances in chitin science
(1996)
The synthesis of six analogs of N,N;-diacetylchitobiose is reported, including a novel transglycosylation reaction for the preparation of S-aryl thioglycosides. The conformations of the compounds were studied by a combination of NMR spectroscopy and molecular modeling, using force field calculations. In the case of the S-aryl thioglycosides with exclusively S-glycosidic linkages, dihedral angles of the disaccharidic S-glycosidic bonds, ;; and ;; and of the S-arylglycoside bonds, ; and ;, were found to be similar, whereas they were different in mixed glycosides and in a thiazoline derivative. An adequate correlation between the calculated H,H-distances of the local minima and the measured NOE contacts was achieved by applying population-weighted averages over participating conformers based on weighted relative energies.
Growth of phytopathogenic fungi in the presence of partially acetylated chitooligosaccharides
(2008)
Four phytopathogenic fungi were cultivated up to six days in media contg. chitooligosaccharide mixts. differing in av. DP and F A. The three different mixts. were named Q3 (which contained oligosaccharides of DP2-DP10, with DP2-DP7 as main components), Q2 (which contained oligosaccharides of DP2-DP12, with DP2-DP10 as main components) and Q1 (which derived from Q2 and contained oligomers of DP5-DP8 with hexamer and a heptamer as the main components). The novel aspect of this work is the description of the effect of mixts. of oligosaccharides with different and known compn. on fungal growth rates. The growth rate of Alternaria alternata and Rhizopus stolonifer was initially inhibited by Q3 and Q2 at higher concns. Q1 had a growth stimulating effect on these two fungi. Growth of Botrytis cinerea was inhibited by Q3 and Q2, while Q1 had no effect on the growth of this fungus. Growth of Penicillium expansum was only slightly inhibited by higher concns. of sample Q3, while Q2 and Q1 had no effect. The inhibition of growth rates or their resistance toward chitooligosaccharides correlated with the absence or presence of chitinolytic enzymes in the culture media, resp. [on SciFinder (R)]
Europium ions were introduced in SiO2 and MCM-41 via two different pathways: (1) grafting the europium complexes with two alkoxide structures, 3-(2-imidazolin-1-yl)-propyl-triethoxysilane (IPTES) and aminopropyltrimethoxysilane (APTMS), and (2) functionalization of the SiO2 support with silicon 4- carboxylbutyltriethoxide followed by subsequent addition of the europium ions. The new materials were characterized using nitrogen adsorption isotherms at -196 degrees C, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, powder X-ray diffraction, Fourier transform infrared, NMR, DR-UV-vis, steady-state emission and excitation, and time-resolved photoluminescence spectroscopy. Spectral changes found in the time-resolved photoluminscence spectra strongly point to the distribution of europium ions on a range of environments in both SiO2 and MCM-41 supports. The average europium photoluminescence lifetimes decrease within the order: Eu3+-IPTES/SiO2 (550 mu s) > Eu3+-APTMS/SiO2 (425 mu s) > Eu3+-APTMS/MCM-41 (370 mu s) > Eu3+-IPTES/MCM-41 (320 mu s) > Eu3+-CABES/SiO2 (240 mu s). The photoluminescence quantum efficiency has the largest value, of 22%, for Eu3+-IPTES/SiO2, while the most reduced value, of 9%, was measured for Eu3+-CABES/SiO2.
From the roots of the African plant Bulbine frutescens (Asphodelaceae), two unprecedented novel dimeric phenylanthraquinones, named joziknipholones A and B, possessing axial and centrochirality, were isolated, together with six known compounds. Structural elucidation of the new metabolites was achieved by spectroscopic and chiroptical methods, by reductive cleavage of the central bond between the monomeric phenylanthraquinone and -anthrone portions with sodium dithionite, and by quantum chemical CD calculations. Based on the recently revised absolute axial configuration of the parent phenylanthraquinones, knipholone and knipholone anthrone, the new dimers were attributed to possess the P- configuration (i.e., with the acetyl portions below the anthraquinone plane) at both axes in the case of joziknipholone A, whereas in joziknipholone B, the knipholone part was found to be M-configured. Joziknipholones A and B are active against the chloroquine resistant strain K1 of the malaria pathogen, Plasmodium falciparum, and show moderate activity against murine leukemic lymphoma L5178y cells.
Fluoroionophores of fluorophore-spacer-receptor format were prepared for detection of PdCl2 by fluorescence enhancement. The fluorescent probes 1-13 consist of a fluorophore group, an alkyl spacer and a dithiomaleonitrile PdCl2 receptor. First, varying the length of the alkylene spacer (compounds 1-3) revealed a dominant through-space pathway for oxidative photoinduced electron transfer (PET) in CH2-bridged dithiomaleonitrile fluoroionophores. Second, fluorescent probes 4-9 containing two anthracene or pyrene fragments connected through CH2 bridges to the dithiomaleonitrile unit were synthesized. Modulation of the oxidation potential (EOx) through electron-withdrawing or -donating groups on the anthracene moiety regulates the thermodynamic driving force for oxidative PET (GPET) in bis(anthrylmethylthio)maleonitriles and therefore the fluorescence quantum yields (f), too. The new concept was confirmed and transferred to pyrenyl ligands, and fluorescence enhancements (FE) greater than 3.2 in the presence of PdCl2 were achieved by 7 and 8 (FE=5.4 and 5.2). Finally, for comparison, monofluorophore ligands 10-13 were synthesized.
Two sesquiterpenes, corymbolone and mustakone, isolated from the chloroform extract of the rhizomes of Cyperus articulatus, exhibited significant anti-plasmodial properties. Mustakone was approximately ten times more active than corymbolone against the sensitive strains of the Plasmodium falciparum.
The quantification of phosphate bound to the C6 and C3 positions of glucose residues in starch has received increasing interest since the importance of starch phosphorylation for plant metabolism was discovered. The method described here is based on the observation that the isobaric compounds glucose-6-phosphate (Glc6P) and glucose-3- phosphate (Glc3P) exhibit significantly different fragmentation patterns in negative ion electrospray tandem mass spectrometry (MS/MS). A simple experiment involving collision-induced dissociation (CID) MS2 spectra of the sample and the two reference substances Glc3P and Glc6P permitted the quantification of the relative amounts of the two compounds in monosaccharide mixtures generated by acid hydrolysis of starch. The method was tested on well-characterized potato tuber starch. The results are consistent with those obtained by NMR analysis. In contrast to NMR, however, the presented method is fast and can be performed on less than 1 mg of starch. Starch samples of other origins exhibiting a variety of phosphorylation degrees were analyzed to assess the sensitivity and robustness of the method.