Refine
Year of publication
Document Type
- Article (86)
- Postprint (9)
- Monograph/Edited Volume (1)
- Other (1)
- Review (1)
Language
- English (98) (remove)
Is part of the Bibliography
- yes (98) (remove)
Keywords
- fluorescence (7)
- Palladium (6)
- fluorescent probes (6)
- potassium (6)
- crown compounds (5)
- adsorption (4)
- metal-organic frameworks (4)
- sensors (4)
- Carbene ligands (3)
- Platinum group metals (3)
Institute
- Institut für Chemie (98) (remove)
Ruthenium(II) complexes [Ru(L-N4Me2)(dape)](PF6)2 {[1](PF6)2}, [Ru(L-N4Me2)(tape)](PF6)2 {[2](PF6)2}, and [{Ru(L-N4Me2)}2(mu-tape)](PF6)4 {[3](PF6)4} were synthesized in two reaction steps by first reacting [Ru(DMSO)4Cl2] with tetraazamacrocyclic ligand N,N'-dimethyl-2,11-diaza[3.3](2,6)-pyridinophane (L-N4Me2) in ethanol under microwave irradiation to the intermediate [Ru(L-N4Me2)Cl2], which was subsequently, without further isolation, reacted with 1,12-diazaperylene (dape) or 1,6,7,12-tetraazaperylene (tape). X-ray structures of [Ru(L-N4Me2)(dape)](PF6)2, [Ru(L-N4Me2)(tape)](PF6)2.acetone, and [{Ru(L-N4Me2)}2(mu-tape)](ClO4)4.MeCN were determined. The UV/Vis absorption spectra of [1](PF6)2, [2](PF6)2, and [3](PF6)4 in acetonitrile display intense low-energy dp(Ru)?p* (dape or tape) MLCT absorption bands centered at 579, 637, and 794 nm, respectively. Reversible metal oxidations for the bimetallic complex [{Ru(L-N4Me2)}2(mu-tape)]4+ ([3]4+) are detected at 1.69 and 1.28 V vs. SCE. The potential difference ?E = 410 mV and the intervalence-charge-transfer (IVCT) transition at 2472 nm indicate a high degree of electronic interaction between the two ruthenium ions mediated through the tape bridging ligand. All three complexes, [1]2+, [2]2+, and [3]4+, were characterized by UV/Vis spectroelectrochemistry. The monooxidized and monoreduced states, [1]3+, [2]3+, [3]5+, and [1]+, [2]+, [3]3+, are accessible by reversible one-electron oxidation and one-electron reduction processes, respectively, as documented by the observation of several stable isosbestic points in the spectral progressions. The second reduction in each complex and the second oxidation in [3]4+ prove to be irreversible in these spectroelectrochemical experiments. Monoreduced species [1]+, [2]+, and [3]3+ yield EPR signals indicating that the unpaired electron is mainly centered on the large surface ligands dape or tape.
A series of diols (diethylene glycol, triethylene glycol, butane-1,4-diol and hexane-1,6-diol) were immobilized onto Merrifield resin and subsequently phosphorylated with dialkyl chlorophosphate (alkyl = Me, Et, Bu). The resins bearing hexane-1,6-diyl groups exhibited very good extraction abilities in regard to precious metal chloro complexes like platinum(IV), palladium(II) and rhodium(III). In batch experiments, more than 98% of Pt(IV) is extracted even when the metal and the hydrochloric acid concentration is enhanced significantly. Elution can be achieved with a solution of 0.5 mol L-1 thiourea in 0.1 mol L-1 hydrochloric acid. In the presence of other noble metals, platinum(IV) is preferentially bound. The extraction yield decreases in slightly acidic solution in the following order: Pt(IV)approximate to Pd(II)>Rh(III) and changes with increasing hydrochloric acid concentration to Pt(IV)>Pd(II)>> Rh(III). At different ratios of metal and acid, the temperature has nearly no influence on the platinum extraction. On slightly acidic media, the extraction of rhodium decreases by 30% when the temperature is increased from 10 degrees C to 40 degrees C. When the acid and metal concentration is enhanced, the palladium extraction decreases by 7-9%, depending on the resin.
A rare example of in situ linker generation with the formation of soft porous Zn- and Co-MOFs (IFP-9 and -10, respectively) is reported. The flexible ethoxy groups of IFP-9 and -10 protrude into the 1D hexagonal channels. The gas-sorption behavior of both materials for H-2, CO2 and CH4 showed wide hysteretic isotherms, typical for MOFs having a flexible substituent which can give rise to a gate effect.
In a systematic approach we synthesized a new series of fluorescent probes incorporating donoracceptor (D-A) substituted 1,2,3-triazoles as conjugative -linkers between the alkali metal ion receptor N-phenylaza-[18]crown-6 and different fluorophoric groups with different electron-acceptor properties (4-naphthalimide, meso-phenyl-BODIPY and 9-anthracene) and investigated their performance in organic and aqueous environments (physiological conditions). In the charge-transfer (CT) type probes 1, 2 and 7, the fluorescence is almost completely quenched by intramolecular CT (ICT) processes involving charge-separated states. In the presence of Na+ and K+ ICT is interrupted, which resulted in a lighting-up of the fluorescence in acetonitrile. Among the investigated fluoroionophores, compound 7, which contains a 9-anthracenyl moiety as the electron-accepting fluorophore, is the only probe which retains light-up features in water and works as a highly K+/Na+-selective probe under simulated physiological conditions. Virtually decoupled BODIPY-based 6 and photoinduced electron transfer (PET) type probes 35, where the 10-substituted anthracen-9-yl fluorophores are connected to the 1,2,3-triazole through a methylene spacer, show strong ion-induced fluorescence enhancement in acetonitrile, but not under physiological conditions. Electrochemical studies and theoretical calculations were used to assess and support the underlying mechanisms for the new ICT and PET 1,2,3-triazole fluoroionophores.
The new N-heterocyclic carbene (NHC) precursors 4,5-dicyano-1, -dimesityl- (9) and 4, 5-dicyano-1, 3-dineopentyl-2-(pentafluorophenyl)imidazoline (14) were synthesized. 9 could be determined by X-ray crystallography. With the 2-pentafluorophenyl-substituted imidazolines 9 and 14, the [AgCl(NHC)], [RhCl(COD)(NHC)], and [RhCl(CO)(2)(NHC)] complexes [NHC = 4, 5-dicyano-1, 3-dimesitylimidazol-2-ylidene (3) and 4, 5-dicyano-1, 3-dineopentylimidazol-2-ylidene (4)] were obtained. Crystal structures of [AgCl(3)] (15), [RhCl(COD)(3)] (17), [RhCl(COD)(4)] (18), and [RhCl(CO)(2)(3)] (19) were solved and with the crystal data of 19, the percent buried volume (%V-bur) of 31.8(+/- 0.1)% was determined for NHC 3. Infrared spectra of the imidazolines 9 and 14 and of the complexes 15-20 were recorded and the CO stretching frequencies of complexes 19 and 20 were used to determine the 3 ( (-1)) and 4 ( (-1)), thus proving that 1, 3-substitution of maleonitrile-NHCs does not have a significant effect for the high -acceptor strength of these carbenes.
Herein, we report the synthesis of two phenylaza-[18]crown-6 lariat ethers with a coumarin fluorophore (1 and 2) and we reveal that compound 1 is an excellent probe for K+ ions under simulated physiological conditions. The presence of a 2-methoxyethoxy lariat group at the ortho position of the anilino moiety is crucial to the substantially increased stability of compounds 1 and 2 over their lariat-free phenylaza-[18] crown-6 ether analogues. Probe 1 shows a high K+/Na+ selectivity and a 2.5-fold fluorescence enhancement was observed in the presence of 100 mm K+ ions. A fluorescent membrane sensor, which was prepared by incorporating probe 1 into a hydrogel, showed a fully reversible response, a response time of 150 s, and a signal change of 7.8% per 1 mm K+ within the range 1-10 mm K+. The membrane was easily fabricated (only a single sensing layer on a solid polyester support), yet no leaching was observed. Moreover, compound 1 rapidly permeated into cells, was cytocompatible, and was suitable for the fluorescent imaging of K+ ions on both the extracellular and intracellular levels.
We have synthesized a set of new unsaturated macrocyclic dithioethers with an increasing number of flexible methylene units 1-7 (Scheme 2) to investigate the correlation between the ring size of these ligands, the chelation effect and the consequences for an efficient PdCl2 coordination. The dithioethers 1-7 and the complex [PdCl2(4)]center dot CHCl3 were characterized by X-ray diffraction analysis. The crystal structures of 1-7 show that 2-7 are better preorganized chelating ligands for an exocyclic PdCl2 coordination than 1. The chelation effect of 1-7, the orientation of the sulfur atoms and the S center dot center dot center dot S donor distances, are influenced by the flexibility of the methylene units. In this series the unsaturated macrocyclic ligands 5 and 6 are the best chelating ligands for an efficient PdCl2 coordination. Comparative solvent extraction experiments with mn-12S(2)O(2) (mn = maleonitrile) reveal that the low interface activity of the new ligands reduces the extraction rate. However, a comparison with open-chain dithiomaleonitriles shows the impact of the macrocyclic effect of 4 and 5 on the extraction yield.
A Co(II)-imidazolate-4-amide-5-imidate based MOF, IFP-5, is synthesized by using an imidazolate anion-based novel ionic liquid as a linker precursor under solvothermal conditions. IFP-5 shows significant amounts of gas (N2, CO2, CH4 and H2) uptake capacities. IFP-5 exhibits an independent high spin Co(II) centre and antiferromagnetic coupling.
A rare example of in situ linker generation with the formation of soft porous Zn- and Co-MOFs (IFP-9 and -10, respectively) is reported. The flexible ethoxy groups of IFP-9 and -10 protrude into the 1D hexagonal channels. The gas- sorption behavior of both materials for H2, CO2 and CH4 showed wide hysteretic isotherms, typical for MOFs having a flexible substituent which can give rise to a gate effect.
A series of nitrogen ligand (L)/copper complexes of the type [(CuL)-L-I](+), [(CuL)-L-II(X)](+) and [(CuL2)-L- I](+) (X = Cl-, BF4-, acac(-), CH3COO- and SO3CF3-) was studied in the gas phase by electrospray ionization mass spectrometry. The following ligands (L) were employed: 1,12-diazaperylene (dap), 1,1'-bisiso-quinoline (bis), 2,2'-bipyridine (bpy), 1,10-phenanthroline (phen), 2,11-disubstituted 1,12-diazaperylenes (dap), 3,3'- disubstituted 1,1'-bisisoquinoline (bis), 5,8-dimethoxy-substituted diazaperylene (meodap), 6,6'-dimethoxy- substituted bisisoquinoline (meobis) and 2,9-dimethyl-1,10-phenanthroline (dmphen). Collision-induced decomposition measurements were applied to evaluate the relative stabilities of the different copper complexes. The influence of the spatial arrangement of the ligands, of the type of substituents and of the counter ion of the copper salts employed for the complexation was examined. Correlations were found between the binding constants of the [ML2](+) complexes in solution and the relative stabilities of the analogous complexes in the gas phase. Furthermore, complexation with the ligands 2,11-dialkylated 1,12-diazaperylenes [alkyl = ethyl (dedap) and isopropyl (dipdap)] was studied in the solvents CH3OH and CH3CN.
Fluoroionophores of fluorophore-spacer-receptor format were prepared for detection of PdCl2 by fluorescence enhancement. The fluorophore probes 1-13 consist of a fluorophore group, in alkyl spacer and a dithiomaleonitrile PdCl2 receptor. First, varying the length of the alkylene spacer (compounds 1-3) revealed, dominant through-space pathway for oxidative photoinduced electron transfer (PET) in CH2-bridged dithiomaleonitrile fluoroionophores. Second. fluorescent probes 4-9 containing two anthracene or pyrene fragments connected through CH2 bridges to the dithiomaleonitrile unit were synthesized. Modulation of the oxidation potential (E-Ox) through electron-withdrawing or -donating groups on the anthracene moiety regulates file thermodynamic driving force for oxidative PET (Delta G(PET)) in bis(anthrylmethylthio)maleonitriles and therefore the fluorescence quantum yields (Phi(f)), too. The new concept was confirmed and transferred to pyrenyl ligands, and fluorescence enhancements (FE) greater than 3.2 in the presence of PdCl2 were achieved by 7 and 8 (FE=5.4 and 5.2). Finally, for comparison, monofluorophore ligands 10-13 were synthesized.
Narrow channels with polar walls are the structural and functional features responsible for the high capacity of a zinc-organic framework based on an imidazolate-amide-imidate ligand for the uptake of H2 and CO2 (see structure: orange Zn, blue N, red O, dark gray C, light gray H). The rigid and stable chelating ligand was synthesized in situ by partial hydrolysis of a dicyanoimidazole compound.
2,11-Dialkylated 1,12-diazaperylenes (alkyl = Me, Et, iPr) dmedap, detdap and dipdap have been synthesized by reductive cyclization of 3,3-dialkylated 1,1-biisoquinolines 3a-c, resulting in the first copper(I) complexes of a large- surface ligand. The new copper(I) complexes show low-energy MLCT absorptions unprecedented for bis(-diimin)copper(I) complexes. The solid structures of the complexes[Cu(dipdap)2]BF4·CH2Cl2·1.5H2O, [Cu(dipdap)2]OTf·CH2Cl2, [Cu(dipdap)2]I·C2H4Cl2·THF·2H2O, [Cu(dmedap)2]OTf and [Cu(dipdap)2]AQSO3·H2O (AQSO3 = sodium 9,10-dihydro-9,10-dioxo-2- anthracenesulfonate) are reported. In [Cu(dipdap)2]BF4·CH2Cl2·1.5H2O, each copper(I) complex cation interacts with two others by - stacking interactions forming a novel supramolecular column structural motif running along the crystallographic c axis. In the crystalline compound [Cu(dipdap)2]AQSO3·H2O, aggregation between two complex cations and two additional anions by - stacking interactions is observed, leading to a tetrameric assembly. Furthermore, the three complex compounds [Cu(L)2]BF4 (L = dmedap, detdap, dipdap) were tested for sensory applications in aqueous buffer solutions in electrochemical studies of the complex immobilized on glassy carbon electrodes.
Fluoroionophores of fluorophore-spacer-receptor format were prepared for detection of PdCl2 by fluorescence enhancement. The fluorescent probes 1-13 consist of a fluorophore group, an alkyl spacer and a dithiomaleonitrile PdCl2 receptor. First, varying the length of the alkylene spacer (compounds 1-3) revealed a dominant through-space pathway for oxidative photoinduced electron transfer (PET) in CH2-bridged dithiomaleonitrile fluoroionophores. Second, fluorescent probes 4-9 containing two anthracene or pyrene fragments connected through CH2 bridges to the dithiomaleonitrile unit were synthesized. Modulation of the oxidation potential (EOx) through electron-withdrawing or -donating groups on the anthracene moiety regulates the thermodynamic driving force for oxidative PET (GPET) in bis(anthrylmethylthio)maleonitriles and therefore the fluorescence quantum yields (f), too. The new concept was confirmed and transferred to pyrenyl ligands, and fluorescence enhancements (FE) greater than 3.2 in the presence of PdCl2 were achieved by 7 and 8 (FE=5.4 and 5.2). Finally, for comparison, monofluorophore ligands 10-13 were synthesized.
1H, 13C, and 15N NMR study of the solution structure of metabridged bis(benzo-15-crown-5-ether)s
(1995)
The macrocyclic ring interconversion of four maleonitrile mixed oxadithia crown ethers of variable ring size, mn-12-S2O2, mn-15-S2O3, mn-18-S2O4 and fn-12-S2O2, were studied by 1H and 13C NMR spectroscopy and by molecular modelling. The barriers to ring interconversion were estimated using variable temperature NMR spectroscopy and from the calculated activation energies, together with the spin-lattice relaxation times of the CH2 carbon atoms, conclusions were drawn regarding the intramolecular flexibility of the crown ethers in both the free state as well as the complexed state incorporating either AgI, BiIII, SbIII, PdII or PtII metal cations. Furthermore, both the stoichiometry of the complexes and the coordination sites of the crown ethers to the various cations were also clearly implicated. Molecular modelling was also utilised to ascertain the preferred conformers of the four compounds and their corresponding complexes, the results of which corroborated the experimental NMR results to a high degree.
Especially sulphur containing compounds are suitable for the separation of noble metals[ , ]. 1,2-Dithioethenes are weak chelate-forming ligands [ ]and in the case of bis(methylthio)maleonitrile[ ] the donor power of both of the sulphur atoms is further decreased by the electron withdrawing effect of the cyanogroups. Crowned dithiomaleonitrile are macrocyclic chelate ligands which extract Pd(II) at sufficient rate in a very good yields. The reason for that extraction behaviour is the fact that Pd(II) favours the square planar coordination geometry in opposite to the 3d- elements. The synthesis of the immobilized ligands proceeds from the 2-allyloxy-1,2-propanediol forming the dicarbon acid which is reduced to the diole. With the help of thionylchloride the dichloro compound is synthesized forming together with a dithiolate (1,2-disodium-1,2-dicyanethene-1,2-dithiolate, 1,2-disodium-4-methylbenzene-1,2-dithiolate [ ]) at high dilution conditions the macrocycle. Than the allysubstituted crown ether is sillylated and the resulting alkoxysilane is immobilised onto activated silca gel. The substituent forms in the same time a spacer should be modified in the future. By immobilisation at an inactive matrix the selectivity of the ligand should be applied for the accumulation of palladium from diluted solutions. The extraction was performed from nitric acid solution with a yield of 93% into a ligand solution (chloroform, kerosine). The extraction equilibrium is reached after 10 min. By atomic absorption spectroscopy the metal concentration in the aqueous phase was determined to calculate the extraction rate. By modification of the cavity of the macrocyclus the extraction rate increases from the acyclic compound through maleonitrile-dithio-21-crown-7, maleonitrile-dithio-15-crown-5 and maleonitrile-18-crown-6. The best results can be observed at the maleonitrile-dithio-12-crown-4. The rise of the function lg D= f(lg L) gives the composition of the extracted compounds as 1:1. The separation is unsatisfactory in the case of Ag(I), Hg(II), Pt(II), Tl (I) and the most 3d-elements. Also Ni(II) as a representative for the 3d-elements shows only separations coefficients of 1.43?103 . Summarizing, a very good separation of palladium from the examined elements can be specified. Additional to the extraction experiments, as well as the crystal structures and by UV spectroscopy the formation constants of selected chelates were determined. The observed order corresponds to that found by the extraction of palladium in the system water/chloroform. In the case of maleonitrile-dithio-15-crown-5 Ag(I) is endocyclic coordinated with all donor atoms of the macrocyclus. Already maleonitrile-dithio-18-crown-6 can include the silver cation into its greater cavity. In these cases a 1:1 complex is formed. A 1:2 sandwich structure was noticed only in the case of the smaller ligand maleonitrile- dithio-12-crown-4. Obviously, the formation of that structure is not favoured in the system water/chloroform from which can be explained the unfavourable extraction results.
Especially sulphur containing compounds are suitable for the separation of noble metals. 1,2-Dithioethenes are weak chelate-forming ligands and in the case of bis(methylthio)maleo-nitrile the donor power of both of the sulphur atoms is further decreased by the electron withdrawing effect of the cyanogroups. Crowned dithiomaleonitrile are macrocyclic chelate ligands which extract Pd(II) at sufficient rate in a very good yields. The synthesis of the immobilised ligands proceeds from the 2-allyloxy-1,2-propanediol forming the dicar-bon acid which is reduced to the diole. With the help of thionylchloride the dichloro compound is synthe-sized forming the macrocycle together with a dithiolate (1,2-disodium-1,2-dicyanethene-1,2-dithiolate, 1,2-disodium-4-methylbenzene-1,2-dithiolate) at high dilution conditions. The allylsubstituted crown ether is sillylated and the resulting alkoxysilane is immobilised onto activated silica gel. The extraction results with crown ethers are compared with that achieved with the help of substituted ß- diketones and 4-acyl-5-pyrazolones. By modification of the cavity of the macrocyclus the extraction rate increases from the acyclic compound through maleonitrile-dithio-21-crown-7, maleonitrile-dithio-15-crown-5 and maleonitrile-18-crown-6. The best results can be observed at the maleonitrile-dithio-12-crown-4. The rise of the function log D= f(log L) gives the composition of the extracted compounds as 1:1. The separa-tion is unsatisfactory in the case of Ag(I), Hg(II), Pt(II), Tl (I) and the most 3d-elements. Summarizing, a very good separation of palladium from the examined elements can be specified. Additional to the extraction experiments, as well as the crystal structures and by UV spectroscopy the for- mation constants of selected chelates were determined.
Both the conformation and flexibility of four mixed oxathia crown ethers and their Ag(I) and Pd(II) complexes were studied by H-1 NMR (delta, J, NOE, T-1), C-13 NMR, dynamic 1H NMR spectroscopy and molecular modelling. The stoichiometry and stability constants of the complexes were determined from corresponding Job's plots in the case of Ag(I) complexes as the interchange between free and complexed states was fast on the NMR timescale; interchange for the Pd(II) complexes was sufficiently slow such that distinct sub-spectra were observable for the free and complexed states. In all cases where complexation was observed, 1 : 1 complexes were formed. Global minima structures determined from the modelling studies were analysed with respect to the barriers to ring interconversion, the flexibility of the species in solution and the preferred complexation of Ag(I) and Pd(II) to the sulfur atoms of the crown ethers
The complexes [(HgCl2)(2)((ch)(2)30S(4)O(6))] (1), [HgCl,(mn21S(2)O(5))] (2), [HgCl2(ch18S(2)O(4))] (3) and [HgI(meb12S(2)O(2))](2)[Hg2I6] (4) have been synthesized, characterized and their crystal structures were determined. In [(HgCl2)(2)((ch)(2)3OS(4)O(6))] two HgCl2 units are discretely bonded within the ligand cavity of the 30-membered dichinoxaline-tetrathia-30-crown-10 ((ch)(2)30S(4)O(6)) forming a binuclear complex. HgCl2 forms I : I "in-cavity" complexes with the 21-membered maleonitrile-dithia-21-crown-7(mn21S(2)O(5)) ligand and the 18-membered chinoxaline- dithia-18-crown-6 (ch18S(2)O(4)) ligand, respectively. The 12-membered 4-methyl-benzo-dithia-12-crown-4 (meb12S(2)O(2)) ligand gave with two equivalents HgI2 the compound [HgI(meb12S(2)O(2))](2)[Hg2I6]. In the cation [HgI(meb12S(2)O(2))](+) meb12S(2)O(2) forms with the cation HgI+ a half-sandwich complex
Homoleptic Ni-II and Fe-II complexes of the "large-surface" phenanthroline-type ligand 1,12-diazaperylene (dap), [Ni(dap)(3)](BF4)(2) (1) and [Fe(dap)(3)](PF6)(2) (2), respectively, were synthesized. In the crystal structure the complex cation [M(dap)(3)](2+) (M = Ni, Fe) exhibits C-3 symmetry and interacts with three other cations by pi-pi stacking. It forms a new metalla-supramolecular assembly with a honeycomb structure containing nanochannels running parallel to the crystallographic c axis. Aggregation by pi-pi stacking between metal complexes of "large-surface" ligands should give new perspectives for inorganic supramolecular chemistry.
The new tetrathiacrown ethers maleonitrile-tetrathia-12-crown-4 (mn12S(4)) and maleonitrile-tetrathia-13-crown- 4 (mn13S(4)) have been prepared and characterised by X-ray crystallographic analysis. These crown ethers form 2:1, 3:2 and 1: 1 complexes with AgY (Y = BF4, PF6). The crystal structures of [Ag(mn12S(4))(2)]BF4 (3a), [Ag(mn13S(4))(2)]BF4 (4a) and [Ag-2(mn13S(4))(3)](PF6)(2) (6b) have been determined. Compound 3a contains the centrosymmetric sandwich complex cation [Ag(mn12S(4))(2)](+) where each mn12S(4) ligand is coordinated to the Ag centre in an endo manner through all four S atoms. The 2:1 complex [Ag(mn12S(4))(2)](+) is the first sandwich complex with a tetrathiacrown ether and the first complex with an octa(thioether) coordination sphere. The crystal structure of compound 4a also reveals a 2:1 complex. This complex, [Ag(mnl3S(4))(2)](+), exhibits a half-sandwich structure. One mn13S(4) ligand coordinates to Ag+ by all four S donor atoms and the other 13S(4) crown by only one S atom. Compound 6b contains a dinuclear Ag complex. The Ag complexes 3a,b-8a,b were also studied by electrospray ionisation mass spectrometry. Collision-induced dissociation (CID) was used to compare the relative stability of 2:1 complexes [AgL2]+ and 1:1 complexes [AgL](+) (L = mn12S(4), mn13S(4)). The C-13 NMR chemical shifts of 2:1 and 1:1 Ag complexes and their corresponding free ligands were also estimated and compared. The free energy of the barrier of ring inversion (Delta G(double dagger)) for [Ag(mn12S(4))(2)](+) was determined to be 64 kJmol(-1).
Electrospray ionization was employed to study the mass spectrometric behavior of the maleonitrile tetrathiacrown ethers mn12S(4) (1) and mn13S(4) (2) and maleonitrile pentathiacrown ether mn15S(5) (3) and of their complexes with various metal salts (MX2, M=Pd, Pt, Ni, Co, Fe; X=Cl, CrCl3, Ni(BF4)(2), TIPF6 or Cd(NO3)(2)) and Cu(SO3CF3)(2). Both singly charged, [MXL](+) and [MXL2]+, and doubly charged complexes, [MLn](2+) (n = 2-5), were observed. The formation of the different complexes consisting of the transition metal ion, the counterion and the various crown ethers and their subsequent dissociation was also studied by collision-induced dissociation measurements which were also used to evaluate the relative stabilities of the complexes. It was found that the collisional voltages for the dissociation of the complexes were generally greater in the [MXL](+) complexes than in the corresponding [MXL2]+ complexes. Copyright (c) 2006 John Wiley & Sons, Ltd
The complex formation of the ligands 1,12-diazaperylene (dap), 1,1-bisisoquinoline (bis), 2,2-bipyridine (bpy) and 1,10-phenanthroline (phen) with transition metal ions (M = Fe, Co, Ni, Cu, Zn, Ru, Os, Re, Pd, Pt, Ag and Cd) in the gas phase has been studied by electrospray ionization mass spectrometry. With the exception of Ru, Os, Fe, Ni and Cu, singly charged complexes [MLn]+ (n = 1,2) were observed. The complexes of dap and bis with Ru, Os, Fe and Ni ions, and the mixed ligand complexes with bpy and phen, are preferably of the doubly charged type [ML3]2+. In addition, collision- induced dissociation (CID) measurements were employed to evaluate the relative stabilities of these complexes. The CID experiments of mixed-ligand complexes which contain both dap and phen or dap and bpy exhibit preferential elimination of bpy, indicating that bpy is a weaker ligand than phen and dap.
A Co(II)–imidazolate-4-amide-5-imidate based MOF, IFP-5, is synthesized by using an imidazolate anion-based novel ionic liquid as a linker precursor under solvothermal conditions. IFP-5 shows significant amounts of gas (N2, CO2, CH4 and H2) uptake capacities. IFP-5 exhibits an independent high spin Co(II) centre and antiferromagnetic coupling.
A rare example of in situ linker generation with the formation of soft porous Zn- and Co-MOFs (IFP-9 and -10, respectively) is reported. The flexible ethoxy groups of IFP-9 and -10 protrude into the 1D hexagonal channels. The gas-sorption behavior of both materials for H2, CO2 and CH4 showed wide hysteretic isotherms, typical for MOFs having a flexible substituent which can give rise to a gate effect.
Sixteen new ionic liquids (ILs) with tetraethylammonium, 1-butyl-3-methylimidazolium, 3-methyl-1-octylimidazolium and tetrabutylphosphonium cations paired with 2-substituted 4,5-dicyanoimidazolate anions (substituent at C2 = methyl, trifluoromethyl, pentafluoroethyl, N,N′-dimethyl amino and nitro) have been synthesized and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA). The effects of cation and anion type and structure of the resulting ILs, including several room temperature ionic liquids (RTILs), are reflected in the crystallization, melting points and thermal decomposition of the ILs. ILs exhibited large liquid and crystallization ranges and formed glasses on cooling with glass transition temperatures in the range of −22 to −71 °C. We selected one of the newly designed ILs due to its bigger size, compared to the common conventional IL anion and high electron-withdrawing nitrile group leads to an overall stabilization anion that may stabilize the metal nanoparticles. Stable and better separated iron and silver nanoparticles are obtained by the decomposition of corresponding Fe2(CO)9 and AgPF6, respectively, under N2-atmosphere in newly designed nitrile functionalized 4,5-dicyanoimidazolate anion based IL. Very small and uniform size for Fe-nanoparticles of about 1.8 ± 0.6 nm were achieved without any additional stabilizers or capping molecules. Comparatively bigger size of Ag-nanoparticles was obtained through the reduction of AgPF6 by hydrogen gas. Additionally, the AgPF6 precursor was decomposed under microwave irradiation (MWI), fabricating nut-in-shell-like, that is, core-separated-from-shell Ag-nano-structures.
Sixteen new ionic liquids (ILs) with tetraethylammonium, 1-butyl-3-methylimidazolium, 3-methyl-1-octylimidazolium and tetrabutylphosphonium cations paired with 2-substituted 4,5-dicyanoimidazolate anions (substituent at C2 = methyl, trifluoromethyl, pentafluoroethyl, N,N′-dimethyl amino and nitro) have been synthesized and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA). The effects of cation and anion type and structure of the resulting ILs, including several room temperature ionic liquids (RTILs), are reflected in the crystallization, melting points and thermal decomposition of the ILs. ILs exhibited large liquid and crystallization ranges and formed glasses on cooling with glass transition temperatures in the range of −22 to −71 °C. We selected one of the newly designed ILs due to its bigger size, compared to the common conventional IL anion and high electron-withdrawing nitrile group leads to an overall stabilization anion that may stabilize the metal nanoparticles. Stable and better separated iron and silver nanoparticles are obtained by the decomposition of corresponding Fe2(CO)9 and AgPF6, respectively, under N2-atmosphere in newly designed nitrile functionalized 4,5-dicyanoimidazolate anion based IL. Very small and uniform size for Fe-nanoparticles of about 1.8 ± 0.6 nm were achieved without any additional stabilizers or capping molecules. Comparatively bigger size of Ag-nanoparticles was obtained through the reduction of AgPF6 by hydrogen gas. Additionally, the AgPF6 precursor was decomposed under microwave irradiation (MWI), fabricating nut-in-shell-like, that is, core-separated-from-shell Ag-nano-structures.
Co-doping of the MOF 3∞[Zn(2-methylimidazolate-4-amide-5-imidate)] (IFP-1 = Imidazolate Framework Potsdam-1) with luminescent Eu3+ and Tb3+ ions presents an approach to utilize the porosity of the MOF for the intercalation of luminescence centers and for tuning of the chromaticity to the emission of white light of the quality of a three color emitter. Organic based fluorescence processes of the MOF backbone as well as metal based luminescence of the dopants are combined to one homogenous single source emitter while retaining the MOF's porosity. The lanthanide ions Eu3+ and Tb3+ were doped in situ into IFP-1 upon formation of the MOF by intercalation into the micropores of the growing framework without a structure directing effect. Furthermore, the color point is temperature sensitive, so that a cold white light with a higher blue content is observed at 77 K and a warmer white light at room temperature (RT) due to the reduction of the organic emission at higher temperatures. The study further illustrates the dependence of the amount of luminescent ions on porosity and sorption properties of the MOF and proves the intercalation of luminescence centers into the pore system by low-temperature site selective photoluminescence spectroscopy, SEM and EDX. It also covers an investigation of the border of homogenous uptake within the MOF pores and the formation of secondary phases of lanthanide formates on the surface of the MOF. Crossing the border from a homogenous co-doping to a two-phase composite system can be beneficially used to adjust the character and warmth of the white light. This study also describes two-color emitters of the formula Ln@IFP-1a–d (Ln: Eu, Tb) by doping with just one lanthanide Eu3+ or Tb3+.
Co-doping of the MOF 3∞[Zn(2-methylimidazolate-4-amide-5-imidate)] (IFP-1 = Imidazolate Framework Potsdam-1) with luminescent Eu3+ and Tb3+ ions presents an approach to utilize the porosity of the MOF for the intercalation of luminescence centers and for tuning of the chromaticity to the emission of white light of the quality of a three color emitter. Organic based fluorescence processes of the MOF backbone as well as metal based luminescence of the dopants are combined to one homogenous single source emitter while retaining the MOF's porosity. The lanthanide ions Eu3+ and Tb3+ were doped in situ into IFP-1 upon formation of the MOF by intercalation into the micropores of the growing framework without a structure directing effect. Furthermore, the color point is temperature sensitive, so that a cold white light with a higher blue content is observed at 77 K and a warmer white light at room temperature (RT) due to the reduction of the organic emission at higher temperatures. The study further illustrates the dependence of the amount of luminescent ions on porosity and sorption properties of the MOF and proves the intercalation of luminescence centers into the pore system by low-temperature site selective photoluminescence spectroscopy, SEM and EDX. It also covers an investigation of the border of homogenous uptake within the MOF pores and the formation of secondary phases of lanthanide formates on the surface of the MOF. Crossing the border from a homogenous co-doping to a two-phase composite system can be beneficially used to adjust the character and warmth of the white light. This study also describes two-color emitters of the formula Ln@IFP-1a–d (Ln: Eu, Tb) by doping with just one lanthanide Eu3+ or Tb3+.
We report a 1,2,3-triazol fluoroionophore for detecting Na+ that shows in vitro enhancement in the Na+-induced fluorescence intensity and decay time. The Na+-selective molecule 1 was incorporated into a hydrogel as a part of a fiber optical sensor. This sensor allows the direct determination of Na+ in the range of 1–10 mM by measuring reversible fluorescence decay time changes.
We report a 1,2,3-triazol fluoroionophore for detecting Na+ that shows in vitro enhancement in the Na+-induced fluorescence intensity and decay time. The Na+-selective molecule 1 was incorporated into a hydrogel as a part of a fiber optical sensor. This sensor allows the direct determination of Na+ in the range of 1–10 mM by measuring reversible fluorescence decay time changes.