Refine
Year of publication
- 2008 (97) (remove)
Document Type
- Article (58)
- Doctoral Thesis (33)
- Postprint (4)
- Monograph/Edited Volume (1)
- Master's Thesis (1)
Keywords
- Chitooligosaccharide (3)
- Chitooligosaccharides (3)
- Chitinase (2)
- Glycosylation (2)
- Metallnitride (2)
- metal nitrides (2)
- nucleation (2)
- ABC triblock copolymer (1)
- Additive (1)
- Adsorbatschwingungen (1)
Institute
- Institut für Chemie (97) (remove)
The anisotropic effect of the olefinic C=C double bond has been calculated by employing the NICS (nucleus independent chemical shift) concept and visualized as an anisotropic cone by a through space NMR shielding grid. Sign and size of this spatial effect on 1H chemical shifts of protons in norbornene, exo- and endo-2-methylnorbornenes, and in three highly congested tetracyclic norbornene analogs have been compared with the experimental 1H NMR spectra as far as published. 1H NMR spectra have also been calculated at the HF/6-31G* level of theory to get a full, comparable set of proton chemical shifts. Differences between ;(1H)/ppm and the calculated anisotropic effect of the C=C double bond are discussed in terms of the steric compression that occurs in the compounds studied.
Nowadays, reactions on surfaces are attaining great scientific interest because of their diverse applications. Some well known examples are production of ammonia on metal surfaces for fertilizers and reduction of poisonous gases from automobiles using catalytic converters. More recently, also photoinduced reactions at surfaces, useful, \textit{e.g.}, for photocatalysis, were studied in detail. Often, very short laser pulses are used for this purpose. Some of these reactions are occurring on femtosecond (1 fs=$10^{-15}$ s) time scales since the motion of atoms (which leads to bond breaking and new bond formation) belongs to this time range. This thesis investigates the femtosecond laser induced associative photodesorption of hydrogen, H$_2$, and deuterium, D$_2$, from a ruthenium metal surface. Many interesting features of this reaction were explored by experimentalists: (i) a huge isotope effect in the desorption probability of H$_2$ and D$_2$, (ii) the desorption yield increases non-linearly with the applied visible (vis) laser fluence, and (iii) unequal energy partitioning to different degrees of freedom. These peculiarities are due to the fact that an ultrashort vis pulse creates hot electrons in the metal. These hot electrons then transfer energy to adsorbate vibrations which leads to desorption. In fact, adsorbate vibrations are strongly coupled to metal electrons, \textit{i.e.}, through non-adiabatic couplings. This means that, surfaces introduce additional channels for energy exchange which makes the control of surface reactions more difficult than the control of reactions in the gas phase. In fact, the quantum yield of surface photochemical reactions is often notoriously small. One of the goals of the present thesis is to suggest, on the basis of theoretical simulations, strategies to control/enhance the photodesorption yield of H$_2$ and D$_2$ from Ru(0001). For this purpose, we suggest a \textit{hybrid scheme} to control the reaction, where the adsorbate vibrations are initially excited by an infrared (IR) pulse, prior to the vis pulse. Both \textit{adiabatic} and \textit{non-adiabatic} representations for photoinduced desorption problems are employed here. The \textit{adiabatic} representation is realized within the classical picture using Molecular Dynamics (MD) with electronic frictions. In a quantum mechanical description, \textit{non-adiabatic} representations are employed within open-system density matrix theory. The time evolution of the desorption process is studied using a two-mode reduced dimensionality model with one vibrational coordinate and one translational coordinate of the adsorbate. The ground and excited electronic state potentials, and dipole function for the IR excitation are taken from first principles. The IR driven vibrational excitation of adsorbate modes with moderate efficiency is achieved by (modified) $\pi$-pulses or/and optimal control theory. The fluence dependence of the desorption reaction is computed by including the electronic temperature of the metal calculated from the two-temperature model. Here, our theoretical results show a good agreement with experimental and previous theoretical findings. We then employed the IR+vis strategy in both models. Here, we found that vibrational excitation indeed promotes the desorption of hydrogen and deuterium. To summarize, we conclude that photocontrol of this surface reaction can be achieved by our IR+vis scheme.
Multinuclear dynamic NMR spectroscopy of 5-trifluoromethylsulfonyl-1,3,5-dioxaazinane (4) revealed the existence of two close in energy chair conformers with differently oriented CF3 groups with respect to the ring. Of the two alternative routes for their interconversion, the ring inversion path with intermediate formation of the corresponding 2,5-twist-conformer is preferred, with the energy barrier of 11.2 kcal/mol in excellent agreement with the experimental value (11.7 kcal/mol). The Perlin effect is studied experimentally and calculated theoretically for all CH2 groups and found to be subject to the nature of the adjacent heteroatoms O and N, respectively.
Tuning of the excited-state properties and photovoltaic performance in PPV-based polymer blends
(2008)
The through space NMR shielding (TSNMRS) values of two tricyclobutabenzene (TCBB) derivatives 2, of the corresponding hexamethylene and hexaoxo TCBB derivatives 3, of [4n]annuleno[4n + 2]annulene 5 and of its tricyclobutadiene parent compound 4 have been ab initio calculated by the GIAO perturbation method employing the nucleus- independent chemical shift (NICS) concept of Paul von Ragué Schleyer, and visualized as iso-chemical shielding surfaces (ICSS). TSNMRS values can be successfully employed to quantify and visualize the aromaticity of the central, and in 5 also of the terminal benzene ring moieties.
Efficient triplet exciton emission has allowed improved operation of organic light-emitting diodes (LEDs). To enhance the device performance, it is necessary to understand what governs the motion of triplet excitons through the organic semiconductor. Here, we have investigated triplet diffusion using a model compound that has weak energetic disorder. The Dexter-type triplet energy transfer is found to be thermally activated down to a transition temperature T- T, below which the transfer rate is only weakly temperature dependent. We show that above the transition temperature, Dexter energy transfer can be described within the framework of Marcus theory. We suggest that below T-T, the nature of the transfer changes from phonon-assisted hopping to quantum-mechanical tunneling. The lower electron-phonon coupling and higher electronic coupling in the polymer compared to the monomer results in an enhanced triplet diffusion rate.
pH sensing in living cells represents one of the most prominent topics in biochemistry and physiology. In this study we performed one-photon and two-photon time-domain fluorescence lifetime imaging with a laser-scanning microscope using the time-correlated single-photon counting technique for imaging intracellular pH levels. The suitability of different commercial fluorescence dyes for lifetime-based pH sensing is discussed on the basis of in vitro as well of in situ measurements. Although the tested dyes are suitable for intensity-based ratiometric measurements, for lifetime- based techniques in the time-domain so far only BCECF seems to meet the requirements of reliable intracellular pH recordings in living cells.
New ABC triblock copolymers were synthesized by controlled free-radical polymerization via Reversible Addition-Fragmentation chain Transfer (RAFT). Compared to amphiphilic diblock copolymers, the prepared materials formed more complex self-assembled structures in water due to three different functional units. Two strategies were followed: The first approach relied on double-thermoresponsive triblock copolymers exhibiting Lower Critical Solution Temperature (LCST) behavior in water. While the first phase transition triggers the self-assembly of triblock copolymers upon heating, the second one allows to modify the self-assembled state. The stepwise self-assembly was followed by turbidimetry, dynamic light scattering (DLS) and 1H NMR spectroscopy as these methods reflect the behavior on the macroscopic, mesoscopic and molecular scale. Although the first phase transition could be easily monitored due to the onset of self-assembly, it was difficult to identify the second phase transition unambiguously as the changes are either marginal or coincide with the slow response of the self-assembled system to relatively fast changes of temperature. The second approach towards advanced polymeric micelles exploited the thermodynamic incompatibility of “triphilic” block copolymers – namely polymers bearing a hydrophilic, a lipophilic and a fluorophilic block – as the driving force for self-assembly in water. The self-assembly of these polymers in water produced polymeric micelles comprising a hydrophilic corona and a microphase-separated micellar core with lipophilic and fluorophilic domains – so called multi-compartment micelles. The association of triblock copolymers in water was studied by 1H NMR spectroscopy, DLS and cryogenic transmission electron microscopy (cryo-TEM). Direct imaging of the polymeric micelles in solution by cryo-TEM revealed different morphologies depending on the block sequence and the preparation conditions. While polymers with the sequence hydrophilic-lipophilic-fluorophilic built core-shell-corona micelles with the core being the fluorinated compartment, block copolymers with the hydrophilic block in the middle formed spherical micelles where single or multiple fluorinated domains “float” as disks on the surface of the lipophilic core. Increasing the temperature during micelle preparation or annealing of the aqueous solutions after preparation at higher temperatures induced occasionally a change of the micelle morphology or the particle size distribution. By RAFT polymerization not only the desired polymeric architectures could be realized, but the technique provided in addition a precious tool for molar mass characterization. The thiocarbonylthio moieties, which are present at the chain ends of polymers prepared by RAFT, absorb light in the UV and visible range and were employed for end-group analysis by UV-vis spectroscopy. A variety of dithiobenzoate and trithiocarbonate RAFT agents with differently substituted initiating R groups were synthesized. The investigation of their absorption characteristics showed that the intensity of the absorptions depends sensitively on the substitution pattern next to the thiocarbonylthio moiety and on the solvent polarity. According to these results, the conditions for a reliable and convenient end-group analysis by UV-vis spectroscopy were optimized. As end-group analysis by UV-vis spectroscopy is insensitive to the potential association of polymers in solution, it was advantageously exploited for the molar mass characterization of the prepared amphiphilic block copolymers.
The mutual dependencies of characteristic quantities for an isotope selective photoionization, namely optimization efficiency, target state population, and wave packet dephasing are presented for the NaK dimer. A pre- optimized pulse shape obtained from the maximization of the isotopomer ratio 23Na39K/23Na41K for the first excited electronic state serves as an initial guess for the subsequent optimization. For the ionization it provides almost vanishing population of the heavier ionic isotopomer and an ionic isotopomer ratio which is significant higher than the findings obtained from former investigations. The wave packet motions on the first excited state of the neutral molecule are in phase for both isotopomers. The optimization procedure, i.e. the simultaneous maximization of the 23Na39K+ photoionization yield and the minimization of the 23Na41K+ photoionization yield for the electronic ground state is based on optimal control theory and leads to a rise of ionic ground state population for both isotopomers related to a significant wave packet dephasing. Upon optimization the isotopomer ratio of the yields falls due to incidental resonances of vibronic transitions. The interplay of the observables are discussed and compared with the values obtained from an optimization which was started from a pure Gaussian pulse shape.
Chitooligosaccharides are composed of linear β-(1→4)-linked 2-acetamido-2-deoxy-β-D-glucopyranose (GlcNAc) and/or 2-amino-2-deoxy-β-D-glucopyranose (GlcN). They are of interest due to their remarkable biological properties including antibacterial, antitumor, antifungal and elicitor activities. They can be obtained from the aminoglucan chitosan by chemical or enzymatic degradation which obviously affords rather heterogenous mixtures. On the other hand, chemical synthesis provides pure compounds with defined sequences of GlcNAc and GlcN monomers. The synthesis of homo- and hetero-chitobioses and hetero-chitotetraoses is described in this thesis. Dimethylmaleoyl and phthaloyl groups were used for protection of the amines. The donor was activated as the trichloroacetimidate in order to form the β-linkages. Glycosylation in the presence of trimethylsilyl trifluoromethanesulfonate, followed by N- and O-deprotection furnished chitobioses and chitotetraoses in good yields.
For the first time stabilizer-free vinylidene fluoride (VDF) polymerizations were carried out in homogeneous phase with supercritical CO₂. Polymerizations were carried out at 140°C, 1500 bar and were initiated with di-tert-butyl peroxide (DTBP). In-line FT-NIR (Fourier Transform- Near Infrared) spectroscopy showed that complete monomer conversion may be obtained. Molecular weights were determined via size-exclusion chromatography (SEC) and polymer end group analysis by 1H-NMR spectroscopy. The number average molecular weights were below 104 g∙mol−1 and polydispersities ranged from 3.1 to 5.7 depending on DTBP and VDF concentration. To allow for isothermal reactions high CO₂ contents ranging from 61 to 83 wt.% were used. The high-temperature, high-pressure conditions were required for homogeneous phase polymerization. These conditions did not alter the amount of defects in VDF chaining. Scanning electron microscopy (SEM) indicated that regular stack-type particles were obtained upon expansion of the homogeneous polymerization mixture. To reduce the required amount of initiator, further VDF polymerizations using chain transfer agents (CTAs) to control molecular weights were carried out in homogeneous phase with supercritical carbon dioxide (scCO₂) at 120 °C and 1500 bar. Using perfluorinated hexyl iodide as CTA, polymers of low polydispersity ranging from 1.5 to 1.2 at the highest iodide concentration of 0.25 mol·L-1 were obtained. Electrospray ionization- mass spectroscopy (ESI-MS) indicates the absence of initiator derived end groups, supporting livingness of the system. The “livingness” is based on the labile C-I bond. However, due to the weakness of the C-I bond perfluorinated hexyl iodide also contributes to initiation. To allow for kinetic analyses of VDF polymerizations the CTA should not contribute to initiation. Therefore, additional CTAs were applied: BrCCl3, C6F13Br and C6F13H. It was found that C6F13H does not contribute to initiation. At 120°C and 1500 bar kp/kt0.5~ 0.64 (L·mol−1·s−1)0.5 was derived. The chain transfer constant (CT) at 120°C has been determined to be 8·10−1, 9·10−2 and 2·10−4 for C6F13I, C6F13Br and C6F13H, respectively. These CT values are associated with the bond energy of the C-X bond. Moreover, the labile C-I bond allows for functionalization of the polymer to triazole end groups applying click reactions. After substitution of the iodide end group by an azide group 1,3 dipolar cycloadditions with alkynes yield polymers with 1,2,3 triazole end groups. Using symmetrical alkynes the reactions may be carried out in the absence of any catalyst. This end-functionalized poly (vinylidene fluoride) (PVDF) has higher thermal stability as compared to the normal PVDF. PVDF samples from homogeneous phase polymerizations in supercritical CO₂ and subsequent expansion to ambient conditions were analyzed with respect to polymer end groups, crystallinity, type of polymorphs and morphology. Upon expansion the polymer was obtained as white powder. Scanning electron microscopy (SEM) showed that DTBP derived polymer end groups led to stack-type particles whereas sponge- or rose-type particles were obtained in case of CTA fragments as end groups. Fourier-Transform Infrared spectroscopy and wide angle X-ray diffraction indicated that the type of polymorph, α or β crystal phase was significantly affected by the type of end group. The content of β-phase material, which is responsible for piezoelectricity of PVDF, is the highest for polymer with DTBP-derived end groups. In addition, the crystallinity of the material, as determined via differential scanning calorimetry is affected by the end groups and polymer molecular weights. For example, crystallinity ranges from around 26 % for DTBP-derived end groups to a maximum of 62 % for end groups originating from perfluorinated hexyl iodide for polymers with Mn ~2200 g·mol–1. Expansion of the homogeneous polymerization mixture results in particle formation by a non-optimized RESS (Rapid Expansion from Supercritical Solution) process. Thus, it was tested how polymer end groups affect the particles size distribution obtained from RESS process under controlled conditions (T = 50°C and P = 200 bar). In all RESS experiments, small primary PVDF with diameters less than 100 nm without the use of liquid solvents, surfactants, or other additives were produced. A strong correlation between particle size and particle size distribution with polymer end groups and molecular weight of the original material was observed. The smallest particles were found for RESS of PVDF with Mn~ 4000 g·mol–1 and PFHI (C6F13I) - derived end groups.
A Co(II)-imidazolate-4-amide-5-imidate based MOF, IFP-5, is synthesized by using an imidazolate anion-based novel ionic liquid as a linker precursor under solvothermal conditions. IFP-5 shows significant amounts of gas (N2, CO2, CH4 and H2) uptake capacities. IFP-5 exhibits an independent high spin Co(II) centre and antiferromagnetic coupling.
The cyclizations of tetrahydroisoquinoline 1,2-amino alcohols with phenylphosphonic dichloride, bis(2- chloroethyl)phosphoramidic dichloride, thionyl chloride and sulfuryl chloride were utilized to synthesize 1,5,6,10b- tetrahydro-1,3,2-oxazaphospholo[4,3-a]isoquinolines (2, 3), 1,5,10,10a-tetrahydro-1,3,2-oxazaphospholo[3,4- b]isoquinolines (8, 9), 1,5,6,10b-tetrahydro-1,2,3-oxathiazolo[4,3-a]isoquinolines (4-6) anda 1,5,10,10a-tetrahydro- 1,2,3-oxathiazolo[3,4-b]isoquinoline (11), which are the first representatives of these ring systems. NMR spectroscopic analysis revealed the existence of conformational equilibria that are fast on the NMR timescale. Theoretical DFT calculations pointed to the participation of generally two preferred conformers in the conformational equilibria; the positions of the equilibria were indicated by the experimental NMR spectroscopic parameters, and they are in good agreement with the theoretically calculated energy differences of the participating conformers. For two compounds, which could be not isolated (10, 12), both the preferred conformers and the stereochemistry could be concluded from the DFT calculation results.
Through the ring closures of tetrahydroisoquinoline 1,3-amino alcohols bearing a phenyl group in the side- chain, diastereomers of novel 1- or 2-phenyl-substituted 1,3,2-oxazaphosphino[4,3-a]isoquinoline 4-oxides, and 1,2,3- oxathiazino[4,3-a]isoquinoline 4-oxides and 4,4-dioxides were prepared. NMR analysis and DFT calculations on the prepared tetrahydroisoquinoline-condensed 1,2,3-heterocycles revealed that their conformational equilibria of cis1-trans-cis2 type are influenced by the relative configuration of P-4 in the 1,3,2-oxazaphosphinanes, and by the position of the phenyl group in the 1,2,3-oxathiazines.
Through the cyclization of 1-(;-hydroxynaphthyl)-1,2,3,4-tetrahydroisoquinoline and 1-(;- hydroxynaphthyl)-1,2,3,4-tetrahydroisoquinoline with formaldehyde, phosgene, p-nitrobenzaldehyde or p-chlorophenyl isothiocyanate, 8-substituted 10,11-dihydro-8H,15bH-naphth[1,2-e][1,3]oxazino[4,3-a]isoquinolines (3 and 4) and 10,11- dihydro-8H,15bH-naphth[2,1-e][1,3]oxazino[4,3-a]isoquinolines (15 and 16) were prepared. Conformational analysis of both the piperidine and the 1,3-oxazine moieties of these heterocycles by NMR spectroscopy and an accompanying theoretical study revealed that these two conformationally flexible six-membered ring moieties prefer twisted chair conformers.
A rare example of in situ linker generation with the formation of soft porous Zn- and Co-MOFs (IFP-9 and -10, respectively) is reported. The flexible ethoxy groups of IFP-9 and -10 protrude into the 1D hexagonal channels. The gas- sorption behavior of both materials for H2, CO2 and CH4 showed wide hysteretic isotherms, typical for MOFs having a flexible substituent which can give rise to a gate effect.
In der vorliegenden Arbeit wurde ein Ansatz verfolgt, die besonderen Eigenschaften der Strukturbildung sequenzdefinierter Peptide mit den vielseitigen Materialeigenschaften synthetischer Blockcopolymere zu kombinieren. Dazu wurde ein synthetisches Polymer kovalent mit einer definierten Peptidsequenz verknüpft. Der Peptidblock (die Organisationseinheit) wurde speziell designt, um später die Strukturbildung des Peptid-Polymerkonjugates induzieren und leiten zu können. Als Organisationsmotiv diente hierbei das aus der Natur bekannte β-Faltblatt Strukturmotiv. Das Peptidsegment wurde in einer festphasengebundenen Synthese aufgebaut. Dabei wurden temporäre Stör-Segmente (Switch-Segmente) in die Peptidsequenz integriert. Diese Segmente unterdrücken die Aggregationstendenz während der Synthese und können durch einen pH-abhängigen Schaltvorgang in das natürliche Peptidrückgrat überführt werden. Zusätzlich zu der verbesserten Ausbeute und Reinheit der entsprechenden Peptide war auf diese Weise eine kontrollierte Aktivierung der Mikrostrukturbildung möglich. Mit Hilfe zwei verschiedener Synthesestrategien (Kupplungs- bzw. Polymerisationsstrategie) wurde ein Satz von definierten Peptid-Polymerkonjugaten mit unterschiedlich großen Polymersegmenten synthetisiert. Diese wurden anschließend im Hinblick auf ihre Strukturbildungseigenschaften in organischen Lösungsmitteln untersucht. Durch mikroskopische Verfahren (AFM, TEM), konnte für alle Konjugate, die Bildung faserartiger Aggregate mit Dimensionen im Nano- bis Mikrometerbereich beobachtet werden. Genauere Untersuchungen zeigten, dass die Peptidsegmente in diesen Faserstrukturen ein β-Faltblatt ausbilden. Dies ist ein deutlicher Hinweis darauf, dass die Strukturbildung der Konjugate tatsächlich durch den Peptidblock gesteuert und kontrolliert wurde.
Reduction of 4-nitro-1-ethyl-1H-1,2,3-triazole with aluminum in alkaline medium resulted in a syn-isomer of 1,2- bis(1-ethyl-1H-1,2,3-triazol-4-yl)diazene 1-oxide. The latter according to the data of X-ray diffraction analysis existed in the crystal as the most stable s-cis,s-trans-conformer, and in solution, as showed NMR data, as a mixture of s-cis,s-trans- and s-trans,s-trans-conformers. The data of quantum-chemical calculations are in agreement with the results of the structural studies.
Structural and physicochem. characteristics of mesquite gum (from Prosopis velutina) were investigated using FT- IR spectroscopic, mass spectrometric and chromatog. methods. Four fractions (F-I, F-IIa, F-IIb and F-III) were isolated by hydrophobic interaction chromatog. The samples were characterized and analyzed for their monosaccharide and oligomers compn. by high performance anion-exchange chromatog. with pulsed amperometric detection (HPAEC-PAD). L-Arabinose (L-Ara) and D-galactose (D-Gal) were found as the main carbohydrate constituent residues in the polysaccharides from mesquite gum and their ratio (L-Ara/D-Gal) varied within the range 2.54 to 3.06 among the various fractions. Small amts. of D- glucose (D-Glc), D-mannose (D-Man) and D-xylose (D-Xyl) were also detected, particularly in Fractions IIa, IIb and III. IR spectroscopy identified polysaccharides and protein in all the samples. Data from mass spectrometry (MALDI-TOF MS) was consistent with the idea that the structure corresponding to the periphereal chains of Fraction I is predominantly a chain of pentoses attached to uronic acid. [on SciFinder (R)].
In dieser Arbeit wird durch Modellrechnungen gezeigt, wie die Stickstoffinversion in Azacyclen als molekularer Schalter genutzt werden könnte. Hierzu werden ein Fluorazetidin- und ein Fluorazacyclopentanderviat quantenchemisch untersucht. Das letztere Molekül wird auch quantendynamisch untersucht. Jedes der beiden Moleküle besitzt zwei stabile Konformationen. Es wird gezeigt, dass das Azabicyclopentanderivat von der einen Konformation mittels zweier linear polarisierter IR-Laserpulse durch sogenanntes “ladder climbing” in die andere überführt werden kann.
In order to obtain information on the number and symmetry of the different Eu3+ complexes formed with several hydroxybenzoic acids, ultra-low temperature luminescence measurements at 4.7 K were carried out. Hydroxybenzoic acids were used as simple model compounds for metal binding structures in humic substances (HS). Information on the complexes was extracted from high-resolution total luminescence spectra (TLS), which were obtained by scanning through the D-5(0) <-- F-7(0) transition of Eu(III) with a pulsed dye laser and measuring the emission in the wavelength range of the D- 5(0) --> F-7(0) and D-5(0) --> F-7(0) transitions simultaneously. By extracting the crystal field strength parameter N- v(B-2q) from the TLS, it was found that N-v(B-2q) was not directly correlated with the excitation energy. Further, the symmetry of the individual complexes formed was extracted from the experimental data. (C) 2007 Elsevier B.V. All rights reserved.
The three major biopolymers, proteins, nucleic acids and glycoconjugates are mainly responsible for the information transfer, which is a fundamental process of life. The biological importance of proteins and nucleic acids are well explored and oligosaccharides in the form of glycoconjugates have gained importance recently. The β-(1→4) linked N-acetylglucosamine (GlcNAc) moiety is a frequently occurring structural unit in various naturally and biologically important oligosaccharides and related conjugates. Chitin which is the most abundant polymer of GlcNAc is widely distributed in nature whereas the related polysaccharide chitosan (polymer of GlcN and GlcNAc) occurs in certain fungi. Chitooligosaccharides of mixed acetylation patterns are of interest for the determination of the substrate specificities and mechanism of chitinases. In this report, we describe the chemical synthesis of three chitotetraoses namely GlcNAc-GlcN-GlcNAc-GlcN, GlcN-GlcNAc-GlcNAc-GlcN and GlcN-GlcN-GlcNAc-GlcNAc. Benzyloxycarbonyl (Z) and p-nitrobenzyloxycarbonyl (PNZ) were used for the amino functionality due to their ability to form the β-linkage during the glycosylation reactions through neighboring group participation and the trichloroacetimidate approach was utilized for the donor. Monomeric, dimeric acceptors and donors have been prepared by utilizing the Z and PNZ groups and coupling between the appropriate donor and acceptors in the presence of Lewis acid yielded the protected tetrasaccharides. Finally cleavage of PNZ followed by reacetylation and the deblocking of other protecting groups afforded the N,N’-diacetyl chitotetraoses in good yield. Successful syntheses for the protected diacetyl chitotetraoses by solid phase synthesis have also been described.
Self-Structuring of functionalized micro- and mesoporous organosilicas using boron-silane-precursors
(2008)
The structuring of porous silica materials at the nanometer scale and their surface functionalization are important issues of current materials research. Many innovations in chromatography, catalysis and electronic devices benefit from this knowledge. The work at hand is dedicated to the targeted design of functional organosilica materials. In this context a new precursor concept based on boron-silanes is presented. These precursors combine the properties of a structure directing group and a silica source by covalent borane linkage. Formation of the precursor is easily realized by a sequential two-step hydroboration, firstly on bis(triethoxysilyl)ethene, and secondly on an unsaturated structure directing moiety such as alkenes or polymers. The so prepared precursors self-organize when hydrolysis of their inorganic moiety takes place via an aggregation of their organic side chains into hydrophobic domains. In this way, the additional use of a surfactant as a template is not necessary. Chemical cleavage of these moieties (e.g. by ammonolysis or oxidative saponification) yields an organosilica where all functionalities are exclusively located at the pore wall and therefore accessible. The accessibility of the functionalities is a vital point for applications and is not necessarily granted for common silica functionalization approaches. Further advantages of the boron-silane concept are the possibility to introduce a variety of surface functionalities by heterolytic cleavage of the boron linker and the control of the pore morphology. For that purpose the covalent linkage of different alkyl groups and polymers was studied. Another aspect is the access to chiral boron silane precursors yielding functionalized mesoporous organosilica with chiral functionalities exclusively located at the pore walls after condensation and removal of the structure directing moiety. These materials possess great potential for applications documented by preliminary investigations on chiral resolution of a racemic mixture by HPLC and asymmetric catalysis. In the course of this work valuable insights into the targeted structuring and surface functionalization of organosilicas were gained. A promising outlook for further investigations is the extension of this concept by altering the structure directing moieties of the precursor. That way the morphology of the final organosilica might be controlled by for example mesogens. Furthermore, the use of the boron linker enables the introduction of multiple functionalities into organosilicas, making the obtained material unique in its performance.
The selective infrared (IR) excitation of molecular vibrations is a powerful tool to control the photoreactivity prior to electronic excitation in the ultraviolet / visible (UV/Vis) light regime ("vibrationally mediated chemistry"). For adsorbates on surfaces it has been theoretically predicted that IR preexcitation will lead to higher UV/Vis photodesorption yields and larger cross sections for other photoreactions. In a recent experiment, IR-mediated desorption of molecular hydrogen from a Si(111) surface on which atomic hydrogen and deuterium were co-adsorbed was achieved, following a vibrational mechanism as indicated by the isotope-selectivity. In the present work, selective vibrational IR excitation of adsorbate molecules, treated as multi-dimensional oscillators on dissipative surfaces, has been simulated within the framework of open-system density matrix theory. Not only potential-mediated, inter-mode coupling poses an obstacle to selective excitation but also the coupling of the adsorbate ("system") modes to the electronic and phononic degrees of freedom of the surface ("bath") does. Vibrational relaxation thereby takes place, depending on the availabilty of energetically fitting electron-hole (e/h) pairs and/or phonons (lattice vibrations) in the surface, on time-scales ranging from milliseconds to several hundreds of femtoseconds. On metal surfaces, where the relaxation process of the adsorbate via the e/h pair mechanism dominates, vibrational lifetimes are usually shorter than on insulator or semiconductor surfaces, in the range of picoseconds, being also the timescale of the IR pulses used here. Further inhibiting factors for selectivity can be the harmonicity of a mode and weak dipole activities ("dark modes") rendering vibrational excitation with moderate field intensities difficult. In addition to simple analytical pulses, optimal control theory (OCT) has been employed here to generate a suitable electric field to populate the target state/mode maximally. The complex OCT fields were analyzed by Husimi transformation, resolving the control field in time and energy. The adsorbate/surface systems investigated were CO/Cu(100), H/Si(100) and 2H/Ru(0001). These systems proved to be suitable models to study the above mentioned effects. Further, effects of temperature, pure dephasing (elastic scattering processes), pulse duration and dimensionality (up to four degrees of freedom) were studied. It was possible to selectively excite single vibrational modes, often even state-selective. Special processes like hot-band excitation, vibrationally mediated desorption and the excitation of "dark modes" were simulated. Finally, a novel OCT algorithm in density matrix representation has been developed which allows for time-dependent target operators and thus enables to control the excitation mechanism instead of only the final state. The algorithm is based on a combination of global (iterative) and local (non-iterative) OCT schemes, such that short, globally controlled time-intervals are coupled locally in time. Its numerical performance and accuracy were tested and verified and it was successfully applied to stabilize a two-state linear-combination and to enforce a successive "ladder climbing" in a rather harmonic system, where monochromatic, analytical pulses simultaneously excited several states, leading to a population loss in the target state.
The through space NMR shielding (TSNMRS) values of adamantane, the 2(N + 1)2 spherical (4c, 2e) homoaromatic compounds 1,3-dehydro-5,7-adamantandiyl dication (C10H122+) and 1,3-dehydro-5,7-cubandiyl dication (C8H42+), and the (6c, 8e) homoaromatic compound 2,2;,4,4;,6,6;,8,8;,10,10;-dehydroadamantane tetracation (C10H44+) have been ab initio calculated, employing the NICS concept, and visualized as iso-chemical shielding surfaces (ICSSs). TSNMRS values can be successfully employed to study both the endohedral and exohedral aromaticity/ antiaromaticity of the compounds studied.
The push-pull character of a series of para-phenyl substituted isophorone chromophores has been quantified by the 13C chemical shift difference of the three conjugated partial C=C double bonds and the quotient of the occupations of both the bonding and anti-bonding orbitals of these C=C double bonds as well. The correlations of the two push-pull quantifying parameters, and to the corresponding bond lengths, strongly recommend ;*c=c/ ;c=c as the general parameter to estimate charge alternation and as a very useful indication of the molecular hyperpolarizabilities for NLO application of the compounds studied.
The Push-pull character of two series of donor-acceptor triazenes has been quantified by C-13 and N-15 chemical shift differences of the partial N(1)=N(2) and N(3)=C(4) double bonds in the central linking C=N-N=N-C unit and by the quotient of the occupations of both the bonding pi and antibonding orbitals pi* of these partial double bonds. Excellent correlations of the two estimates, to quantify the push-pull effect, with the bond lengths strongly recommend the occupation quotients pi*/pi, the N-15 chemical shift differences Delta delta[N(l),N(2)], and the corresponding bond lengths as reasonable sensors for quantifying charge alternation along the C=N-N=N-C linking unit, for the donor- acceptor quality of the triazenes 1 and 2 and for the molecular hyperpolarizability beta(0) of these compounds. Within this context, certain Substances can be strongly recommended for NLO application.
Tria-, penta-, hepta- and nonafulvenes (1-4) have been studied theoretically at the MP2 ab initio level of theory. For the global minimum structures, the occupation of the bonding ;C=C orbital of the exocyclic C=C double bond, obtained by NBO analysis, quantitatively proves ;-electron delocalization which can reveal partial 2-, 6- and 10-;-electron aromaticity, and 4-, 8- and 12-;-electron antiaromaticity of the ring moieties. Beside the corresponding occupation number, this conjugation was quantified by the length of the exocyclic C=C double bond whilst the (anti)aromaticity of the ring moieties of 1-4 was visualized and quantified by through space NMR shielding surfaces (TSNMRS).
Quantification of the (Anti)Aromaticity of Fulvalenes Subjected to -Electron Cross-Delocalization
(2008)
Fulvalenes 3-12 were theoretically studied at the ab initio level of theory. For the global minima structures, the occupation of the bonding (pi)C=C orbital of the interring C=C double bond obtained by NBO analysis quantitatively proves pi-electron cross-delocalization resulting in, at least partially, 2- or 6pi-electron aromaticity and 8pi- electron antiaromaticity for appropriate moieties. The cross-conjugation was quantified by the corresponding occupation numbers and lengths of the interring C=C double bonds, while the aromaticity or antiaromaticity due to cross- delocalization of the pi-electrons was visualized and quantified by through-space NMR shielding surfaces.
Vinylogs of fulvalenes with cyclopropenyl and cyclopentadienyl moieties attached either to different carbon atoms (c-C3H2-CH-CH=C5H4-c, 7) or to the same carbon atom [X=C(c-C3H2)(c-C5H4), 10] [X = CH2; C(CN)2; C(NH2)2; C(OCH2)2; O; c-C3H2; c-C5H4; SiH2; CCl2] of the double bond inserted between the two rings are examined theoretically at the B3LYP/ 6;311G(d,p) level. Both types of compounds are shown to possess aromaticity, which was called "push;pull" and "captodative" aromaticity, respectively. For the captodative mesoionic structures X=C(c-C3H2)(c-C5H4), the presence of both the two aromatic moieties and the C=C double bond is the necessary and sufficient condition for their existence as energetic minima on the potential energy surface. Aromatic stabilization energy (ASE) was assessed by the use of homodesmotic reactions and heats of hydrogenation. Spatial magnetic criteria (through space NMR shieldings, TSNMRS) of the two types of vinylogous fulvalenes 7 and 10 have been calculated by the GIAO perturbation method employing the nucleus independent chemical shift (NICS) concept of Paul von Ragué; Schleyer, and visualized as iso-chemical-shielding surfaces (ICSS) of various sizes and directions. TSNMRS values can be successfully employed to visualize and quantify the partial push;pull and captodative aromaticity of both the three- and five-membered ring moieties. In addition, the push;pull effect in compounds 7 and 10 could be quantified by the occupation quotient ;*C=C/;C=C of the double bond inserted between the two rings.
We consider diffusion processes with a spatially varying diffusivity giving rise to anomalous diffusion. Such heterogeneous diffusion processes are analysed for the cases of exponential, power-law, and logarithmic dependencies of the diffusion coefficient on the particle position. Combining analytical approaches with stochastic simulations, we show that the functional form of the space-dependent diffusion coefficient and the initial conditions of the diffusing particles are vital for their statistical and ergodic properties. In all three cases a weak ergodicity breaking between the time and ensemble averaged mean squared displacements is observed. We also demonstrate a population splitting of the time averaged traces into fast and slow diffusers for the case of exponential variation of the diffusivity as well as a particle trapping in the case of the logarithmic diffusivity. Our analysis is complemented by the quantitative study of the space coverage, the diffusive spreading of the probability density, as well as the survival probability.
Together with the nonsubstituted reference compound, para-methoxy- and para-nitro cyclohexyl benzoates have been synthesized and their conformational equilibria studied by low temperature NMR spectroscopy and theoretical DFT calculations. The free energy differences ;G° between axial and equatorial conformers were examined with respect to polar substituent influences on the conformational equilibrium of O-mono-substituted cyclohexane.
A series of terbium- and europium-exchanged microporous-mesoporous zeolite Socony Mobil Five (MFI)-type materials such as Zeotile-1 and Zeogrid with varying Si/Al ratios was investigated using FTIR, PXRD, adsorption- desorption isotherms of N-2 at 77 K and time-resolved luminescence spectroscopy. Silylation of the lanthanides-exchanged Zeotile-1 and Zeogrid with hexadecyl trimethoxysilanes via post-synthesis grafting was also studied. The results showed that the lanthanide's photoluminescence spectra and decays were modified due to silylation. The different silylation effects in Zeotile-1 and Zeogrid were correlated with the textural properties of the investigated materials. (C) 2007 Elsevier B.V. All rights reserved.
From a series of pentanuclear, heterobimetallic complexes of the general composition [{Ln(H2O)n}2{Ni(dto)2}3] · xH2O, four complexes (Ln = Gd(III) with n = 4; Ln = Dy(III), Ho(III), or Er(III), with n = 5; x = 9-12; dto = 1,2- dithiooxalate) were studied due to their large magnetic moments (up to 14.65 B.M.). The magnetic properties of these complete series were measured at room temperature and the temperature dependent magnetic properties of the complexes Gd2Ni3, Dy2Ni3, Ho2Ni3, and Er2Ni3 were studied at room temperature down to 1.8 K. Whereas the intramolecular metal- metal distances were rather long (Ni1-Ni2: 11.0-11.5 Å; Ln-Ni: 6.0-6.3 Å), relatively short intermolecular metal-metal distances (Ni1-Ni2;: 3.5 Å; Er-Er;: 6.0 Å) were found in the crystal lattice, giving rise to weak intermolecular metal-metal interactions. These weak spin interactions were also supported by the EPR spectrum of a powdered sample of the diamagnetically undiluted Gd2Ni3 complex.
Acid-catalyzed reaction of trifluoromethanesulfonamide with paraformaldehyde in ethyl acetate led to the formation of oxymethylated products that did not form in the reaction carried out in sulfuric acid. Following products were obtained: 5-trifluoromethylsulfonyl-1,3-dioxazinane, 3,7-bis-(trifluoromethylsulfonyl)-1,5,3,7-dioxadiazocane, and a complex of trifluoromethanesulfonamide with 2,4,8,10-tetraoxospiro[5,5]undecene, 1:1. The spiroring resulted from the cyclization of pentaerythritol under the action of formaldehyde. The pentaerythritol formed in its turn by oxymethylation of the methyl group of ethyl acetate with paraformaldehyde followed by the reduction of the COOEt group into CH2 OH by the formaldehyde.
For more than 70 years, understanding of the mechanism of particle nucleation in emulsion polymerization has been one of the most challenging issues in heterophase polymerization research. Within this work a comprehensive experimental study of particle nucleation in emulsion polymerization of styrene at 70 °C and variety of conditions has been performed. To follow the onset of nucleation, on-line conductivity measurements were applied. This technique is highly sensitive to the mobility of conducting species and hence, it can be employed to follow aggregation processes leading to particle formation. On the other hand, by recording the optical transmission (turbidity) of the reaction mixture particle growth was followed. Complementary to the on-line investigations, off-line characterizations of the particle morphology and the molecular weight have been performed. The aim was to achieve a better insight in the processes taking place after starting the reaction via particle nucleation until formation of colloidally stable latex particles. With this experimental protocol the initial period of styrene emulsion polymerization in the absence as well as in the presence of various surfactants (concentrations above and below the critical micellization concentration) and also in the presence of seed particles has been investigated. Ionic and non-ionic initiators (hydrophilic and hydrophobic types) have been applied to start the polymerizations. Following the above algorithm, experimental evidence has been obtained showing the possibility of performing surfactant-free emulsion polymerization of styrene with oil-soluble initiators. The duration of the pre-nucleation period (that is the time between starting the polymerization and nucleation) can be precisely adjusted with the initiator hydrophobicity, the equilibration time of styrene in water, and the surfactant concentration. Spontaneous emulsification of monomer in water, as soon as both phases are brought into contact, is a key factor to explain the experimental results. The equilibration time of monomer in water as well as the type and concentration of other materials in water (surfactants, seed particles, etc.) control the formation rate and the size of the emulsified droplets and thus, have a strong influence on the particle nucleation and the particle morphology. One of the main tasks was to investigate the effect of surfactant molecules and especially micelles on the nucleation mechanism. Experimental results revealed that in the presence of emulsifier micelles the conductivity pattern does not change essentially. This means that the presence of emulsifiers does not change the mechanism of particle formation qualitatively. However, surfactants assist in the nucleation process as they lower the activation free energy of particle formation. Contrary, seed particles influence particle nucleation, substantially. In the presence of seed particles above a critical volume fraction the formation of new particles can be suppressed. However, micelles and seed particles as absorbers exhibit a common behavior under conditions where monomer equilibration is not allowed. Results prove that the nucleation mechanism comprises the initiation of water soluble oligomers in the aqueous phase followed by their aggregation. The process is heterogeneous in nature due to the presence of monomer droplets.
Nanostructured materials are materials consisting of nanoparticulate building blocks on the scale of nanometers (i.e. 10-9 m). Composition, crystallinity and morphology can enhance or even induce new properties of the materials, which are desirable for todays and future technological applications. In this work, we have shown new strategies to synthesise metal oxide and metal nitride nanomaterials. The first part of the work deals with the study of nonaqueous synthesis of metal oxide nanoparticles. We succeeded in the synthesis of In2O3 nanopartcles where we could clearly influence the morphology by varying the type of the precursors and the solvents; of ZnO mesocrystals by using acetonitrile as a solvent; of transition metal oxides (Nb2O5, Ta2O5 and HfO2) that are particularly hard to obtain on the nanoscale and other technologically important materials. Solvothermal synthesis however is not restricted to formation of oxide materials only. In the second part we show examples of nonaqueous, solvothermal reactions of metal nitrides, but the main focus lies on the investigation of the influence of different morphologies of metal oxide precursors on the formation of the metal nitride nanoparticles. In spite of various reports, the number and variety of nanocrystalline metal nitrides is marginally small by comparison to metal oxides; hence preformed metal oxides as precursors for the preparation of metal nitrides are a logical choice. By reacting oxide nanoparticles with cyanamide, urea or melamine, at temperatures of 800 to 900 °C under nitrogen flow metal nitrides could be obtained. We studied in detail the influence of the starting material and realized that size, crystallinity, type of nitrogen source and temperature play the most important role. We have managed to propose and verify a dissolution-recrystallisation model as the formation mechanism. Furthermore we could show that the initial morphology of the oxides could be retained when ammonia flow was used instead.
The stereodynamic behaviour of 1-(trifluoromethylsulfonyl)piperidine 1, 4-(trifluoromethylsulfonyl)morpholine 2, 1,4-bis(trifluoromethylsulfonyl)piperazine 3 and 4-(trifluoromethylsulfonyl)thiomorpholine 1,1-dioxide 4 was studied by low-temperature 1H, 13C and 19F NMR spectroscopies. In acetone solution, compounds 1, 2 and 4 were found to exist as mixtures of two conformers in the ratio of 4:1, 4:1 and 8:1, respectively, differing by orientation of the CF3 group with respect to the ring. Compound 3 exists as a mixture of three conformers in the ratio of 3:28:69 also differing by the orientation of the two CF3 groups. Unlike the previously studied N-trifyl substituted 1,3,5-triheterocyclohexanes, the preferred conformers of compound 1 and of 1,4-diheterocyclohexanes 2-4 are those with the CF3 group directed outward from the ring, which is caused by intramolecular interactions of the oxygen atoms of the CF3SO2N groups with the equatorial hydrogens in the ;-position. B3LYP/6-311+G(d,p) calculations of the energy, geometry and NMR parameters corroborate the experimental data. The calculated Perlin effects for all conformers of compounds 1-4 as well as those measured for the major conformers of compounds 3 and 4 were analyzed by the use of the NBO analysis.
Heterophase polymerization is a technique widely used for the synthesis of high performance polymeric materials with applications including paints, inks, adhesives, synthetic rubber, biomedical applications and many others. Due to the heterogeneous nature of the process, many different relevant length and time scales can be identified. Each of these scales has a direct influence on the kinetics of polymerization and on the physicochemical and performance properties of the final product. Therefore, from the point of view of product and process design and optimization, the understanding of each of these relevant scales and their integration into one single model is a very promising route for reducing the time-to-market in the development of new products, for increasing the productivity and profitability of existing processes, and for designing products with improved performance or cost/performance ratio. The process considered is the synthesis of structured or composite polymer particles by multi-stage seeded emulsion polymerization. This type of process is used for the preparation of high performance materials where a synergistic behavior of two or more different types of polymers is obtained. Some examples include the synthesis of core-shell or multilayered particles for improved impact strength materials and for high resistance coatings and adhesives. The kinetics of the most relevant events taking place in an emulsion polymerization process has been investigated using suitable numerical simulation techniques at their corresponding time and length scales. These methods, which include Molecular Dynamics (MD) simulation, Brownian Dynamics (BD) simulation and kinetic Monte Carlo (kMC) simulation, have been found to be very powerful and highly useful for gaining a deeper insight and achieving a better understanding and a more accurate description of all phenomena involved in emulsion polymerization processes, and can be potentially extended to investigate any type of heterogeneous process. The novel approach of using these kinetic-based numerical simulation methods can be regarded as a complement to the traditional thermodynamic-based macroscopic description of emulsion polymerization. The particular events investigated include molecular diffusion, diffusion-controlled polymerization reactions, particle formation, absorption/desorption of radicals and monomer, and the colloidal aggregation of polymer particles. Using BD simulation it was possible to precisely determine the kinetics of absorption/desorption of molecular species by polymer particles, and to simulate the colloidal aggregation of polymer particles. For diluted systems, a very good agreement between BD simulation and the classical theory developed by Smoluchowski was obtained. However, for concentrated systems, significant deviations from the ideal behavior predicted by Smoluchowski were evidenced. BD simulation was found to be a very valuable tool for the investigation of emulsion polymerization processes especially when the spatial and geometrical complexity of the system cannot be neglected, as is the case of concentrated dispersions, non-spherical particles, structured polymer particles, particles with non-uniform monomer concentration, and so on. In addition, BD simulation was used to describe non-equilibrium monomer swelling kinetics, which is not possible using the traditional thermodynamic approach because it is only valid for systems at equilibrium. The description of diffusion-controlled polymerization reactions was successfully achieved using a new stochastic algorithm for the kMC simulation of imperfectly mixed systems (SSA-IM). In contrast to the traditional stochastic simulation algorithm (SSA) and the deterministic rate of reaction equations, instead of assuming perfect mixing in the whole reactor, the new SSA-IM determines the volume perfectly mixed between two consecutive reactions as a function of the diffusion coefficient of the reacting species. Using this approach it was possible to describe, using a single set of kinetic parameters, typical mass transfer limitations effects during a free radical batch polymerization such as the cage effect, the gel effect and the glass effect. Using multiscale integration it was possible to investigate the formation of secondary particles during the seeded emulsion polymerization of vinyl acetate over a polystyrene seed. Three different cases of radical generation were considered: generation of radicals by thermal decomposition of water-soluble initiating compounds, generation of radicals by a redox reaction at the surface of the particles, and generation of radicals by thermal decomposition of surface-active initiators "inisurfs" attached to the surface of the particles. The simulation results demonstrated the satisfactory reduction in secondary particles formation achieved when the locus of radical generation is controlled close to the particles surface.
Multiplexed diagnostics and spectroscopic ruler applications with terbium to quantum dots FRET
(2008)
The quantification of phosphate bound to the C6 and C3 positions of glucose residues in starch has received increasing interest since the importance of starch phosphorylation for plant metabolism was discovered. The method described here is based on the observation that the isobaric compounds glucose-6-phosphate (Glc6P) and glucose-3- phosphate (Glc3P) exhibit significantly different fragmentation patterns in negative ion electrospray tandem mass spectrometry (MS/MS). A simple experiment involving collision-induced dissociation (CID) MS2 spectra of the sample and the two reference substances Glc3P and Glc6P permitted the quantification of the relative amounts of the two compounds in monosaccharide mixtures generated by acid hydrolysis of starch. The method was tested on well-characterized potato tuber starch. The results are consistent with those obtained by NMR analysis. In contrast to NMR, however, the presented method is fast and can be performed on less than 1 mg of starch. Starch samples of other origins exhibiting a variety of phosphorylation degrees were analyzed to assess the sensitivity and robustness of the method.
Chitooligosaccharides are composed of glycosamin and N-acetylglycisamin residues. Gel permeations chromatography is employed for the separation of oligomers, cation exchange chromatography is used for the separation of homologes and isomers. Trideuterioacetylation of the chitooligosaccharides followed by MALDI-TOF mass spectrometry allowes for the quantitation of mixtures of homologes. vMALDI LTQ multiple-stage MS is employed for quantitative sequencing of complex mixtures of heterochitooligosaccharides. Pure homologes and isomers are applied to biological assays. Chitooligosaccahrides form high-affinity non-covalent complexes with HC gp-39 (human cartilage glycoprotein of 39 kDa). The affinity of the chitooligosaccharides depends on DP, FA and the sequence of glycosamin and N-acetylglycosamin moieties. (+)nanoESI Q TOF MS/MS is used for identification of a high-affinity binding chitooligosaccharide of a non-covalent chitinase B - chitooligosaccharide complex. DADAA is identified as the heterochitoisomer binding with highest affinity and biostability to HC gp-39. Fluorescence based enzyme assays confirm the results.
The electron ionization (EI) mass spectra of a variety of stereoisomeric tricyclic 1,3,2-oxazaphosphino[4,3- a]isoquinolines (1-4), 1,2,3-oxathiazino[4,3-a]isoquinoline-4-oxides (5-7) and the -4,4-dioxides (8-10) of oxazaphospholo- and oxathiazolo[4,3-a]- (11, 12, 15 and 16) and -[3,4-b]isoquinolines (13, 14 and 17) were recorded. Ring size and fusion, the different heteroatoms (P and S) and substituents on the ring systems strongly influence the mass spectra. In addition, mass spectra of the stereoisomers of compounds 1, 2 and 13, 14 revealed stereochemically relevant differences which are not observed for the other pairs of isomers. Copyright © 2008 John Wiley & Sons, Ltd.
In this microreview we describe the principle of Forster resonance energy transfer (FRET) occurring between closely spaced energy-donor and -acceptor molecules. The theoretical treatment is depicted in relation with the data extractable from spectroscopic measurements. We present the specific case of semiconductor nanocrystals (or quantum dots QDs) as energy donors in FRET experiments and a particular emphasis is put on the specific advantages of these fluorophores with regard to both their exceptional photophysical properties and their nanoscopic morphology. In a following section, the special attributes of luminescent lanthanide complexes (LLCs) are outlined with illustrations of properties such as their characteristic emission spectra, long-lived luminescence, and large "Stokes shift". Finally, the successful combination of LLCs and QDs in FRET experiments is demonstrated, showing the unrivaled benefits of this singular marriage, opening doors for energy transfer at very large distances and excellent sensitivity of detection within the frame of time-resolved fluoroimmunoassays. ((C) Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2008).
From the roots of the African plant Bulbine frutescens (Asphodelaceae), two unprecedented novel dimeric phenylanthraquinones, named joziknipholones A and B, possessing axial and centrochirality, were isolated, together with six known compounds. Structural elucidation of the new metabolites was achieved by spectroscopic and chiroptical methods, by reductive cleavage of the central bond between the monomeric phenylanthraquinone and -anthrone portions with sodium dithionite, and by quantum chemical CD calculations. Based on the recently revised absolute axial configuration of the parent phenylanthraquinones, knipholone and knipholone anthrone, the new dimers were attributed to possess the P-configuration (i.e., with the acetyl portions below the anthraquinone plane) at both axes in the case of joziknipholone A, whereas in joziknipholone B, the knipholone part was found to be M-configured. Joziknipholones A and B are active against the chloroquine resistant strain K1 of the malaria pathogen, Plasmodium falciparum, and show moderate activity against murine leukemic lymphoma L5178y cells.
From the roots of the African plant Bulbine frutescens (Asphodelaceae), two unprecedented novel dimeric phenylanthraquinones, named joziknipholones A and B, possessing axial and centrochirality, were isolated, together with six known compounds. Structural elucidation of the new metabolites was achieved by spectroscopic and chiroptical methods, by reductive cleavage of the central bond between the monomeric phenylanthraquinone and -anthrone portions with sodium dithionite, and by quantum chemical CD calculations. Based on the recently revised absolute axial configuration of the parent phenylanthraquinones, knipholone and knipholone anthrone, the new dimers were attributed to possess the P- configuration (i.e., with the acetyl portions below the anthraquinone plane) at both axes in the case of joziknipholone A, whereas in joziknipholone B, the knipholone part was found to be M-configured. Joziknipholones A and B are active against the chloroquine resistant strain K1 of the malaria pathogen, Plasmodium falciparum, and show moderate activity against murine leukemic lymphoma L5178y cells.
Im Rahmen der Arbeit werden hierarchisch strukturierte Silikakompositfasern präsentiert, deren Bildung ähnlich zu natürlichen Silifizierungsreaktionen verläuft. Als Analoga zu Proteinfilamenten in Silika Morphogeneseorganismen werden selbstorganisierte, funktionale Polyethylenoxid-Peptid-Nanobänder eingesetzt. Mit der Isolierung einheitlicher Nanokompositfasern wird gezeigt, dass die PEO-Peptid-Nanobänder eine starke Bindungsaffinität gegenüber Kieselsäure besitzen, diese aus sehr stark verdünnten Lösungen anreichern und deren Kondensation zu Silikanetzwerken kontrollieren können. In höheren Konzentrationen entstehen durch die peptidgeleitete Silifizierung der PEO-Peptid-Nanobänder spontan makroskopische Kompositfasern mit sechs Hierarchieebenen. Diese verbinden Längen von bis zu 3 cm und Durchmesser von 1-2 mm mit einer definierten Feinstruktur im Submikrometerbereich. Als Resultat der komplexen inneren Struktur und der Kontrolle der Grenzflächen zwischen Nanobändern und Silika wird eine Nanohärte erreicht, die schon ~1/3 der Härte von Bioglasfasern darstellt. Für die Elastizität (reduziertes Eindrückmodul) dagegen konnte durch den relativ hohen Anteil (~40%) an verformbaren, organischen Komponenten ein ~4-mal größer Wert im Vergleich mit Bioglasfasern bestimmt werden. Des Weiteren wird die Prozessierung der makroskopischen Kompositfasern in einem 2D-Plotprozess vorgestellt. Mit Verwendung der PEO-Peptid-Nanobänder als „Tinte“ können Kompositobjekte in beliebigen Formen geplottet werden, deren Linienbreite sowie anisotrope Ausrichtung der Nano- und Submikrometerstrukturelemente direkt mit der Plotgeschwindigkeit korrelieren. Außerdem können die Kompositobjekte als Vorstufen für orientierte, mesoporöse Silikaobjekte verwendet werden. Nachdem Calcinieren werden Silikastrukturen mit einer hohen spezifischen Oberfläche und in Plotrichtung ausgerichteten zylindrischen Poren erhalten. Im Kontrast zu den anorganisch-bioorganischen Kompositfasern sollten unter Ausnutzung ionischer Wechselwirkungen oder Metallkoordination Kompositmaterialien mit anderen mechanischen Eigenschaften dargestellt werden. Es wird gezeigt, dass durch Variationen in der Aminosäuresequenz des Peptidkerns, die Oberflächen der PEO-Peptid-Nanobänder gezielt mit funktionellen Gruppen versehen werden können. Eine gerichtete Vernetzung dieser modifizierten Nanobänder wurde nicht erreicht, dafür könnten die imidazolfunktionalisierten Nanobänder als eindimensionale Protonenleiter, die mit photochromen Gruppen (Spiropyran) funktionalisierten Nanobänder für die Modifizierung von Oberflächenpolaritäten oder für gerichtete Kristallisationsprozesse eingesetzt werden.
A new series of unsubstituted and substituted pyridinium salts bearing a 4-oxothiazolidinyl moiety has been prepared by an efficient rearrangement of 2-(1-bromoalkylidene)thiazolidin-4-ones. The process in based on three steps, namely carbon-bromine cleavage, bromine transfer, and substitution, each induced by pyridine or its derivatives, acting as base and reactant.
Growth of phytopathogenic fungi in the presence of partially acetylated chitooligosaccharides
(2008)
Four phytopathogenic fungi were cultivated up to six days in media containing chitooligosaccharide mixtures differing in average DP and FA. The three different mixtures were named Q3 (which contained oligosaccharides ofDP2–DP10, withDP2–DP7 asmain components), Q2 (which contained oligosaccharides of DP2–DP12, with DP2–DP10 as main components) and Q1 (which derived from Q2 and contained oligomers of DP5–DP8 with hexamer and a heptamer as the main components). The novel aspect of this work is the description of the effect of mixtures of oligosaccharides with different and known composition on fungal growth rates. The growth rate of Alternaria alternata and Rhizopus stolonifer was initially inhibited by Q3 and Q2 at higher concentrations. Q1 had a growth stimulating effect on these two fungi. Growth of Botrytis cinerea was inhibited by Q3 and Q2, while Q1 had no effect on the growth of this fungus. Growth of Penicillium expansum was only slightly inhibited by higher concentrations of sample Q3, while Q2 and Q1 had no effect. The inhibition of growth rates or their resistance toward chitooligosaccharides correlated with the absence or presence of chitinolytic enzymes in the culture media, respectively.
Growth of phytopathogenic fungi in the presence of partially acetylated chitooligosaccharides
(2008)
Four phytopathogenic fungi were cultivated up to six days in media contg. chitooligosaccharide mixts. differing in av. DP and F A. The three different mixts. were named Q3 (which contained oligosaccharides of DP2-DP10, with DP2-DP7 as main components), Q2 (which contained oligosaccharides of DP2-DP12, with DP2-DP10 as main components) and Q1 (which derived from Q2 and contained oligomers of DP5-DP8 with hexamer and a heptamer as the main components). The novel aspect of this work is the description of the effect of mixts. of oligosaccharides with different and known compn. on fungal growth rates. The growth rate of Alternaria alternata and Rhizopus stolonifer was initially inhibited by Q3 and Q2 at higher concns. Q1 had a growth stimulating effect on these two fungi. Growth of Botrytis cinerea was inhibited by Q3 and Q2, while Q1 had no effect on the growth of this fungus. Growth of Penicillium expansum was only slightly inhibited by higher concns. of sample Q3, while Q2 and Q1 had no effect. The inhibition of growth rates or their resistance toward chitooligosaccharides correlated with the absence or presence of chitinolytic enzymes in the culture media, resp. [on SciFinder (R)]
Funktionalisierte Poly(2-oxazoline) als neue Materialien stellen sowohl unter strukturellen Gesichtspunkten als auch im Hinblick auf potentielle Anwendungen eine interessante Polymerklasse dar. Die Ausbildung von hierarchischen Strukturen mit Poly(2-oxazolinen) über intermolekulare Wasserstoffbrückenbindungen ist hierbei ein bisher nicht beachteter Aspekt. Über einen bioinspirierten Ansatz sollten gezielt funktionelle Gruppen, die für einen hierarchischen Aufbau, z.B. in Proteinen, verantwortlich sind, in vereinfachter Weise auf die synthetische Substanzklasse der Poly(2-oxazoline) übertragen werden. Die vorliegende Arbeit beschäftigt sich mit der modularen Synthese neuer, funktionalisierter Poly(2-oxazolin) Homo- und Copolymere. Ausgehend von der Synthese von 2-(3-Butenyl)-2-oxazolin wurden definierte Präpolymere in einer kationischen Isomerisierungspolymerisation unter kontrolliert/„lebenden“ Bedingungen hergestellt. In einer anschließenden „Thio-Click“ (Thiol-En-Reaktion) Modifizierungsreaktion wurden die gewünschten funktionellen Gruppen quantitativ eingeführt. Hydroxylierte Poly(2-oxazoline) wurden hinsichtlich ihres Aggregationsverhaltens in Wasser untersucht. Bereits die jeweiligen Homopolymere bildeten aufgrund von intermolekularen Wasserstoffbrückenbindungen supramolekulare tubuläre Nanofasern aus. Durch Einsatz verschiedener analytischer Methoden konnte die innere Struktur der Nanoröhren beschrieben und ein entsprechendes Modell aufgestellt werden. Die dargestellten funktionellen Poly(2-oxazoline) wurden hinsichtlich ihrer Anwendung als potentielle, synthetische „antifreeze additives“ untersucht. Alle Polymere besitzen eine ausgeprägte Tendenz zur Nukleierung von Wasser und führen daher zu signifikanten Änderungen der Eismorphologie. Des weiteren wurde ein carboxyliertes Derivat zur biomimetischen Mineralisation von Kalziumcarbonat eingesetzt und nach phänomenologischen Gesichtspunkten untersucht.
Background: There is an increased need to replace materials derived from fossil sources by renewables. Sugar- cane derived carbohydrates are very abundant in Brazil and are the cheapest sugars available in the market, with more than 400 million tons of sugarcane processed in the year 2007. The objective of this work was to study the prepn. of sugar acrylates from free sugars and free acrylic acid, thus avoiding the previous prepn. of protected sugar derivs., such as glycosides, or activated acrylates, such as vinyl acrylate. Results: Lipase catalyzed esterification of three mono- and two disaccharides with acrylic acid, in the presence or absence of mol. sieves was investigated. The reactions were monitored by high-performance liq. chromatog. (HPLC) and the products were analyzed by matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry. The main products are mono- and diacrylates, while higher esters are formed as minor products. The highest conversion to sugar acrylates was obsd. for the D-glucose and D- fructose, followed by D-xylose and D-maltose. Mol. sieves had no pronounced effect on the conversion. Conclusions: A feasible method is described to produce and to characterize sugar acrylates, including those contg. more than two acrylate groups. The process for prodn. of these higher esters could potentially be optimized further to produce mols. for crosslinking in acrylate polymn. and other applications. The direct enzymic esterification of free carbohydrates with acrylic acid is unprecedented. [on SciFinder (R)].
BACKGROUND: There is an increased need to replace materials derived from fossil sources by renewables. Sugar-cane derived carbohydrates are very abundant in Brazil and are the cheapest sugars available in the market, with more than 400 million tons of sugarcane processed in the year 2007. The objective of this work was to study the preparation of sugar acrylates from free sugars and free acrylic acid, thus avoiding the previous preparation of protected sugar derivatives, such as glycosides, or activated acrylates, such as vinyl acrylate. RESULTS: Lipase catalyzed esterification of three mono- and two disaccharides with acrylic acid, in the presence or absence of molecular sieves was investigated. The reactions were monitored by high-performance liquid chromatography (HPLC) and the products were analyzed by matrix-assisted laser desorption ionization–time of flight (MALDI-TOF) mass spectrometry. The main products are mono- and diacrylates, while higher esters are formed as minor products. The highest conversion to sugar acrylates was observed for the D-glucose and D-fructose, followed by D-xylose and D-maltose. Molecular sieves had no pronounced effect on the conversion CONCLUSIONS: A feasible method is described to produce and to characterize sugar acrylates, including those containing more than two acrylate groups. The process for production of these higher esters could potentially be optimized further to produce molecules for cross-linking in acrylate polymerization and other applications. The direct enzymatic esterification of free carbohydrates with acrylic acid is unprecedented.
Endohedral and external through-space NMR shieldings (TSNMRS) and the magnetic susceptibilities of the fullerene carbon cages of C50, C60, C60-6, C70, and C70-6 were assessed by ab initio molecular orbital calculations. Employing the nucleus-independent chemical shift (NICS) concept, these TSNMRS were visualized as isochemical shielding surfaces (ICSS) and were applied to quantitatively estimate either the aromaticity or the anti-aromaticity on the fullerene surface pertaining to the five- or six-membered ring moieties and the shielding of any nuclei enclosed within the carbon cages. Differences between the NICSs calculated at the center of the fullerene carbon cages and the experimental chemical shifts of encapsulated NMR-active nuclei as well as experimental shieldings observed for different encapsulated nuclei were able to be understood readily for the first time.
The electronic effects of the 5- and 6-membered heterocyclic rings on the C=N-N unit of five different hydrazone derivatives of pyridine-2-, -3- and -4-carbaldehydes, pyrrole-2-carbaldehyde, furan-2- and -3-carbaldehydes and thiophene-2- and -3-carbaldehydes have been studied with the aid of 13C and 15N NMR measurements together with the natural bond orbital (NBO) analysis. As model compounds are used the corresponding substituted benzaldehyde derivatives. The polarization of the C=N unit of the hydrazone functionality of the heteroaryl derivatives occurs in an analogous manner with that of phenyl derivatives. The electron-withdrawing heteroaryl groups destabilize and the electron-donating groups stabilize the positive charge development at the CN carbon while the effect on the negative charge development is opposite. The 15N NMR chemical shift of the C=N and C=N-N nitrogens and the NBO charges at C=N-N unit can be correlated with the replacement substituent constants of the heteroaryl groups. 13C NMR shifts of the C=N carbon of N,N- dialkylhydrazones of the heteroarenecarbaldehydes can be correlated with a dual parameter equation possessing the polar substituent constant ;* of the heteroaryl group and the electronegativity of the heteroatom as variables.
DFT-GIAO-NBO and 13C NMR study of the delta-syn-axial effect in 2,4-disubstituted adamantanes
(2008)
Six groups of diastereomeric 2,4-disubstituted adamantanes were studied with DFT-GIAO-NBO (natural orbital analysis) methods. The calculated 13C chemical shifts reproduce well the experimental data. It was found that among all diastereomers, those bearing substituents in -syn-axial positions showed the largest overall deshielding, i.e. the sum of all 13C chemical shifts [;;(13C)] was the greatest and also had the highest delocalization contribution to the molecular energy evaluated with NBO. The higher delocalization energy is proposed to be the origin of the deshielding -syn-axial effect
Development of versatile chemical platforms to access new generations of "smart" polymer materials
(2008)
The aim of this work was to investigate the effect of decreased cytosolic pyruvate kinase (PKc) on potato (Solanum tuberosum) tuber metabolism. Transgenic potato plants with strongly reduced levels of PKc were generated by RNA interference gene silencing under the control of a tuber-specific promoter. Metabolite profiling showed that decreased PKc activity led to a decrease in the levels of pyruvate and some other organic acids involved in the tricarboxylic acid cycle. Flux analysis showed that this was accompanied by changes in carbon partitioning, with carbon flux being diverted from glycolysis toward starch synthesis. However, this metabolic shift was relatively small and hence did not result in enhanced starch levels in the tubers. Although total respiration rates and the ATP to ADP ratio were largely unchanged, transgenic tubers showed a strong decrease in the levels of alternative oxidase (AOX) protein and a corresponding decrease in the capacity of the alternative pathway of respiration. External feeding of pyruvate to tuber tissue or isolated mitochondria resulted in activation of the AOX pathway, both in the wild type and the PKc transgenic lines, providing direct evidence for the regulation of AOX by changes in pyruvate levels. Overall, these results provide evidence for a crucial role of PKc in the regulation of pyruvate levels as well as the level of the AOX in heterotrophic plant tissue, and furthermore reveal that these parameters are interlinked in vivo.
The spatial magnetic properties (Through Space NMR Shieldings - TSNMRS) of two cyclobutadiene derivatives (2 and 5) and of a number of cyclobutadiene dianion derivatives (3, 4 and 6-8) have been calculated by the GIAO perturbation method employing the Nucleus-Independent Chemical Shift (NICS) concept of P. v. Ragué Schleyer, and visualized as Iso-Chemical-Shielding Surfaces (ICSS) of various size and direction. TSNMRS values can be successfully employed to quantify and visualize the (anti)aromaticity of the compounds studied and to discuss the influence of Li+ complexation to cyclobutadiene dianion (4a, 7 and 8) on planar 4c,6e or three-dimensional 6c,6e aromaticity.
The crystal and molecular structures of trans-2,4,4-trimethyl-4-silathiane 1-oxide 1 and 4,4-dimethyl-4- silathiane 1,1-dioxide 2 were determined by single crystal X-ray diffraction. Both compounds have the chair conformation with the 2-Me and the S=O group in compound 1 occupying the equatorial positions. The DFT (B3LYP/6-311G(d,p)) and MP2 (MP2/6-311G(d,p)) theoretical calculations nicely reproduce the X-ray experimental geometry. The obtained results are discussed in connection with the electronic and structural properties of the compounds.
We present an approach to the correlated dynamics of many-electron systems. We show, that the twoelectron reduced density matrix (2RDM) can provide a suitable description of the real time evolution of a system. To achieve this, the hierarchy of equations of motion must be truncated in a practical way. Also, the computational effort, given that the 2RDM is represented by products of two-electron determinants, is discussed, and numerical model calculations are presented.
We present an approach to the correlated dynamics of many-electron systems. We show, that the two-electron reduced density matrix (2RDM) can provide a suitable description of the real time evolution of a system. To achieve this, the hierarchy of equations of motion must be truncated in a practical way. Also, the computational effort, given that the 2RDM is represented by products of two-electron determinants, is discussed, and numerical model calculations are presented.
The complex formation of the ligands 1,12-diazaperylene (dap), 1,1-bisisoquinoline (bis), 2,2-bipyridine (bpy) and 1,10-phenanthroline (phen) with transition metal ions (M = Fe, Co, Ni, Cu, Zn, Ru, Os, Re, Pd, Pt, Ag and Cd) in the gas phase has been studied by electrospray ionization mass spectrometry. With the exception of Ru, Os, Fe, Ni and Cu, singly charged complexes [MLn]+ (n = 1,2) were observed. The complexes of dap and bis with Ru, Os, Fe and Ni ions, and the mixed ligand complexes with bpy and phen, are preferably of the doubly charged type [ML3]2+. In addition, collision- induced dissociation (CID) measurements were employed to evaluate the relative stabilities of these complexes. The CID experiments of mixed-ligand complexes which contain both dap and phen or dap and bpy exhibit preferential elimination of bpy, indicating that bpy is a weaker ligand than phen and dap.
In an area that contains high concentrations of natural organic matter, it is expected that it plays an important role on the behavior of rare earth elements (REE), like europium, and of trivalent actinides. Competitive interactions with H+, inorganic species, major cations, e.g. Ca(II) or Mg(II), could influence these metals transport and bioavailability. Competitive experiments between cations, which can bind differently to humic substances and Eu3+,will bring an improved understanding of the competitive mechanisms. The aim of this study is to acquire data for Eu(III)/Cu(II) and Eu(III)/Ca(II) competitive binding to a sedimentary originated humic acid (Gorleben, Germany). The NICA-Donnan parameters for Ca2+, Cu2+, and Eu3+ obtained from competitive binding experiments using Ca2+ or Cu2+ ion selective electrodes were used to model time-resolved laser fluorescence spectroscopy (TRLFS) measurements. Eu3+ and Cu2+ are in direct competition for the same type of sites,whereas Ca2+ has an indirect influence through electrostatic binding.
Two sesquiterpenes, corymbolone and mustakone, isolated from the chloroform extract of the rhizomes of Cyperus articulatus, exhibited significant anti-plasmodial properties. Mustakone was approximately ten times more active than corymbolone against the sensitive strains of the Plasmodium falciparum.
The anisotropic effect of the planar nitrate anion NO3- has been ab initio calculated employing the Nucleus- Independent Chemical Shift (NICS) concept of von Ragué Schleyer and visualized as Iso-Chemical-Shielding Surfaces (ICSSs) of various (de)shieldings. Complexation-induced shifts in the 1H NMR spectra of nitrate/metal complexes or nitrate/receptor supramolecules can be separated now into anisotropic influences of the suitably coordinated nitrate anions and effects originating from differential sources.
This thesis provides a novel view on the early stage of crystallization utilizing calcium carbonate as a model system. Calcium carbonate is of great economical, scientific and ecological importance, because it is a major part of water hardness, the most abundant Biomineral and forms huge amounts of geological sediments thus binding large amounts of carbon dioxide. The primary experiments base on the evolution of supersaturation via slow addition of dilute calcium chloride solution into dilute carbonate buffer. The time-dependent measurement of the Ca2+ potential and concurrent pH = constant titration facilitate the calculation of the amount of calcium and carbonate ions bound in pre-nucleation stage clusters, which have never been detected experimentally so far, and in the new phase after nucleation, respectively. Analytical Ultracentrifugation independently proves the existence of pre-nucleation stage clusters, and shows that the clusters forming at pH = 9.00 have a proximately time-averaged size of altogether 70 calcium and carbonate ions. Both experiments show that pre-nucleation stage cluster formation can be described by means of equilibrium thermodynamics. Effectively, the cluster formation equilibrium is physico-chemically characterized by means of a multiple-binding equilibrium of calcium ions to a ‘lattice’ of carbonate ions. The evaluation gives GIBBS standard energy for the formation of calcium/carbonate ion pairs in clusters, which exhibits a maximal value of approximately 17.2 kJ mol^-1 at pH = 9.75 and relates to a minimal binding strength in clusters at this pH-value. Nucleated calcium carbonate particles are amorphous at first and subsequently become crystalline. At high binding strength in clusters, only calcite (the thermodynamically stable polymorph) is finally obtained, while with decreasing binding strength in clusters, vaterite (the thermodynamically least stable polymorph) and presumably aragonite (the thermodynamically intermediate stable polymorph) are obtained additionally. Concurrently, two different solubility products of nucleated amorphous calcium carbonate (ACC) are detected at low binding strength and high binding strength in clusters (ACC I 3.1EE-8 M^2, ACC II 3.8EE-8 M^2), respectively, indicating the precipitation of at least two different ACC species, while the clusters provide the precursor species of ACC. It is proximate that ACC I may relate to calcitic ACC –i.e. ACC exhibiting short range order similar to the long range order of calcite and that ACC II may relate to vateritic ACC, which will subsequently transform into the particular crystalline polymorph as discussed in the literature, respectively. Detailed analysis of nucleated particles forming at minimal binding strength in clusters (pH = 9.75) by means of SEM, TEM, WAXS and light microscopy shows that predominantly vaterite with traces of calcite forms. The crystalline particles of early stages are composed of nano-crystallites of approximately 5 to 10 nm size, respectively, which are aligned in high mutual order as in mesocrystals. The analyses of precipitation at pH = 9.75 in presence of additives –polyacrylic acid (pAA) as a model compound for scale inhibitors and peptides exhibiting calcium carbonate binding affinity as model compounds for crystal modifiers- shows that ACC I and ACC II are precipitated in parallel: pAA stabilizes ACC II particles against crystallization leading to their dissolution for the benefit of crystals that form from ACC I and exclusively calcite is finally obtained. Concurrently, the peptide additives analogously inhibit the formation of calcite and exclusively vaterite is finally obtained in case of one of the peptide additives. These findings show that classical nucleation theory is hardly applicable for the nucleation of calcium carbonate. The metastable system is stabilized remarkably due to cluster formation, while clusters forming by means of equilibrium thermodynamics are the nucleation relevant species and not ions. Most likely, the concept of cluster formation is a common phenomenon occurring during the precipitation of hardly soluble compounds as qualitatively shown for calcium oxalate and calcium phosphate. This finding is important for the fundamental understanding of crystallization and nucleation-inhibition and modification by additives with impact on materials of huge scientific and industrial importance as well as for better understanding of the mass transport in crystallization. It can provide a novel basis for simulation and modelling approaches. New mechanisms of scale formation in Bio- and Geomineralization and also in scale inhibition on the basis of the newly reported reaction channel need to be considered.
A series of 9,10-diarylanthracenes with various substituents at the ortho positions have been synthesised by palladium-catalysed cross-coupling reactions. Such compounds exhibit interesting physical properties and can be applied as molecular switches. Despite the high steric demand of the substituents, products were formed in moderate-to-good yields. In some cases, microwave conditions further improved yields. Bis-coupling afforded two isomers (syn and anti) that do not interconvert at room temperature. These products were easily separated and their relative stereochemistries were unequivocally assigned by NMR spectroscopy and X-ray analysis. The syn and anti isomers exhibit different physical properties (e.g., melting points and solubilities) and interconversion by rotation around the aryl-aryl axis commences at <100 °C for fluoro-substituted diarylanthracenes and at >300 °C for alkyl- or alkoxy-substituted diarylanthracenes. The reactions with singlet oxygen were studied separately and revealed different reactivities and reaction pathways. The yields and reactivities depend on the size and electronic nature of the substituents. The anti isomers form the same 9,10-endoperoxides as the syn species, occasionally accompanied by unexpected 1,4-endoperoxides as byproducts. Thermolysis of the endoperoxides exclusively yielded the syn isomers. The interesting rotation around the aryl-aryl axis allows the application of 9,10-diarylanthracenes as molecular switches, which are triggered by light and air under mild conditions. Finally, the oxygenation and thermolysis sequence provides a simple, synthetic access to a single stereoisomer (syn) from an unselective coupling step.
Nanostructured inorganic materials are routinely synthesized by the use of templates. Depending on the synthesis conditions of the product material, either “soft” or “hard” templates can be applied. For sol-gel processes, usually “soft” templating techniques are employed, while “hard” templates are used for high temperature synthesis pathways. In classical templating approaches, the template has the unique role of structure directing agent, in the sense that it is not participating to the chemical formation of the resulting material. This work investigates a new templating pathway to nanostructured materials, where the template is also a reagent in the formation of the final material. This concept is described as “reactive templating” and opens a synthetic path toward materials which cannot be synthesised on a nanometre scale by classical templating approaches. Metal nitrides are such kind of materials. They are usually produced by the conversion of metals or metal oxides in ammonia flow at high temperature (T > 1000°C), which make the application of classical templating techniques difficult. Graphitic carbon nitride, g-C3N4, despite its fundamental and theoretical importance, is probably one of the most promising materials to complement carbon in material science and many efforts are put in the synthesis of this material. A simple polyaddition/elimination reaction path at high temperature (T = 550°C) allows the polymerisation of cyanamide toward graphitic carbon nitride solids. By hard templating, using nanostructured silica or aluminium oxide as nanotemplates, a variety of nanostructured graphitic carbon nitrides such as nanorods, nanotubes, meso- and macroporous powders could be obtained by nanocasting or nanocoating. Due to the special semi-conducting properties of the graphitic carbon nitride matrix, the nanostructured graphitic carbon nitrides show unexpected catalytic activity for the activation of benzene in Friedel-Crafts type reactions, making this material an interesting metal free catalyst. Furthermore, due to the chemical composition of g-C3N4 and the fact that it is totally decomposed at temperatures between 600°C and 800°C even under inert atmosphere, g-C3N4 was shown to be a good nitrogen donor for the synthesis of early transition metal nitrides at high temperatures. Thus using the nanostructured carbon nitrides as “reactive templates” or “nanoreactors”, various metal nitride nanostructures, such as nanoparticles and porous frameworks could be obtained at high temperature. In this approach the carbon nitride nanostructure played both the role of the nitrogen source and of the exotemplate, imprinting its size and shape to the resulting metal nitride nanostructure.