Refine
Has Fulltext
- yes (720) (remove)
Year of publication
Document Type
- Doctoral Thesis (411)
- Postprint (136)
- Article (88)
- Preprint (35)
- Habilitation Thesis (22)
- Conference Proceeding (11)
- Master's Thesis (11)
- Monograph/Edited Volume (3)
- Course Material (2)
- Bachelor Thesis (1)
Keywords
- Synchronisation (20)
- diffusion (19)
- synchronization (14)
- data analysis (13)
- Datenanalyse (12)
- Klimawandel (10)
- Nichtlineare Dynamik (10)
- anomalous diffusion (10)
- Spektroskopie (9)
- Synchronization (9)
Institute
- Institut für Physik und Astronomie (720) (remove)
Monolithic perovskite silicon tandem solar cells can overcome the theoretical efficiency limit of silicon solar cells. This requires an optimum bandgap, high quantum efficiency, and high stability of the perovskite. Herein, a silicon heterojunction bottom cell is combined with a perovskite top cell, with an optimum bandgap of 1.68 eV in planar p-i-n tandem configuration. A methylammonium-free FA(0.75)Cs(0.25)Pb(I0.8Br0.2)(3) perovskite with high Cs content is investigated for improved stability. A 10% molarity increase to 1.1 m of the perovskite precursor solution results in approximate to 75 nm thicker absorber layers and 0.7 mA cm(-2) higher short-circuit current density. With the optimized absorber, tandem devices reach a high fill factor of 80% and up to 25.1% certified efficiency. The unencapsulated tandem device shows an efficiency improvement of 2.3% (absolute) over 5 months, showing the robustness of the absorber against degradation. Moreover, a photoluminescence quantum yield analysis reveals that with adapted charge transport materials and surface passivation, along with improved antireflection measures, the high bandgap perovskite absorber has the potential for 30% tandem efficiency in the near future.
We present results of full 3D hydrodynamical and radiative transfer simulations of the colliding stellar winds in the massive binary system η Carinae. We accomplish this by applying the SimpleX algorithm for 3D radiative transfer on an unstructured Voronoi-Delaunay grid to recent 3D smoothed particle hydrodynamics (SPH) simulations of the binary colliding winds. We use SimpleX to obtain detailed ionization fractions of hydrogen and helium, in 3D, at the resolution of the original SPH simulations. We investigate several computational domain sizes and Luminous Blue Variable primary star mass-loss rates. We furthermore present new methods of visualizing and interacting with output from complex 3D numerical simulations, including 3D interactive graphics and 3D printing. While we initially focus on η Car, the methods employed can be applied to numerous other colliding wind (WR 140, WR 137, WR 19) and dusty `pinwheel' (WR 104, WR 98a) binary systems. Coupled with 3D hydrodynamical simulations, SimpleX simulations have the potential to help determine the regions where various observed time-variable emission and absorption lines form in these unique objects.
We present 3D numerical simulations of the NGC6888 nebula considering the proper motion and the evolution of the star, from the red supergiant (RSG) to the Wolf-Rayet (WR) phase. Our simulations reproduce the limb-brightened morphology observed in [OIII] and X-ray emission maps. The synthetic maps computed by the numerical simulations show filamentary and clumpy structures produced by instabilities triggered in the interaction between the WR wind and the RSG shell.
Populärwissenschaftlicher Abstract: Bislang gibt es in der beobachtenden optischen Astronomie zwei verschiedene Herangehensweisen: Einerseits werden Objekte durch Kameras abbildend erfaßt, andererseits werden durch die wellenlängenabhängige Zerlegung ihres Lichtes Spektren gewonnen. Das Integral - Field - Verfahren ist eine relativ neue Technik, welche die genannten Beobachtungsmethoden vereint. Das Objektbild im Teleskopfokus wird in räumlich zerlegt und jedes Ortselement einem gemeinsamen Spektrografen zugeführt. Hierdurch wird das Objekt nicht nur zweidimensional räumlich erfaßt, sondern zusätzlich die spektrale Kompenente als dritte Dimension erhalten, weswegen das Verfahren auch als 3D-Methode bezeichnet wird. Anschaulich kann man sich das Datenresultat als eine Abbildung vorstellen, in der jeder einzelne Bildpunkt nicht mehr nur einen Intensitätswert enthält, sondern gleich ein ganzes Spektrum. Diese Technik ermöglicht es, ausgedehnte Objekte im Unterschied zu gängigen Spaltspektrografen komplett zu erfassen. Die besondere Stärke der Methode ist die Möglichkeit, die Hintergrundkontamination der unmittelbaren Umgebung des Objektes zu erfassen und in der Auswertung zu berücksichtigen. Durch diese Fähigkeit erscheint die 3D-Methode prädestiniert für den durch moderne Großteleskope erschlossenen Bereich der extragalaktischen Stellarastronomie. Die detaillierte Untersuchung aufgelöster stellare Populationen in nahegelegenen Galaxien ist erst seit kurzer Zeit dank der Fortschritte mit modernen Grossteleskopen und fortschrittlicher Instrumentierung möglich geworden. Wegen der Bedeutung für die Entstehung und Evolution von Galaxien werden diese Arbeiten zukünftig weiter an Bedeutung gewinnen. In der vorliegenden Arbeit wurde die Integral-Field-Spektroskopie an zwei planetarischen Nebeln in der nächstgelegenen großen Spiralgalaxie M31 (NGC 224) getestet, deren Helligkeiten und Koordinaten aus einer Durchmusterung vorlagen. Hierzu wurden Beobachtungen mit dem MPFS-Instrument am russischen 6m - Teleskop in Selentschuk/Kaukasus sowie mit INTEGRAL/WYFFOS am englischen William-Herschel-Teleskop auf La Palma gewonnen. Ein überraschendes Ergebnis war, daß eins der beiden Objekte falsch klassifiziert wurde. Sowohl die meßbare räumliche Ausdehnung des Objektes als auch das spektrale Erscheinungsbild schlossen die Identität mit einem planetarischen Nebel aus. Mit hoher Wahrscheinlichkeit handelt es sich um einen Supernovaüberrest, zumal im Rahmen der Fehler an gleicher Stelle eine vom Röntgensatelliten ROSAT detektierte Röntgenquelle liegt. Die in diesem Projekt verwendeten Integral-Field-Instrumente wiesen zwei verschiedene Bauweisen auf, die sich miteinander vergleichen ließen. Ein Hauptkritikpunkt der verwendeten Instrumente war ihre geringe Lichtausbeute. Die gesammelten Erfahrung fanden Eingang in das Konzept des derzeit in Potsdam in der Fertigung befindlichen 3D-Instruments PMAS (Potsdamer Multi - Apertur - Spektrophotometer), welcher zunächst für das 3.5m-Teleskop des Calar - Alto - Observatoriums in Südspanien vorgesehen ist. Um die Effizienz dieses Instrumentes zu verbessern, wurde in dieser Arbeit die Kopplung der zum Bildrasterung verwendeten Optik zu den Lichtleitfasern im Labor untersucht. Die Untersuchungen zur Maximierung von Lichtausbeute und Stabilität zeigen, daß sich die Effizienz durch Auswahl einer geeigneten Koppelmethode um etwa 20 Prozent steigern lässt.
The main objective of this work is to investigate the evolution of massive stars, and the interplay between them and the ionized gas for a sample of local metal-poor Wolf-Rayet galaxies.
Optical integral field spectrocopy was used in combination with multi-wavelength radio data.
Combining optical and radio data, we locate Wolf-Rayet stars and supernova remnants across the Wolf-Rayet galaxies to study the spatial correlation between them. This study will shed light on the massive star formation and its feedback, and will help us to better understand
distant star-forming galaxies.
In this paper two groups supporting different views on the mechanism of light induced polymer deformation argue about the respective underlying theoretical conceptions, in order to bring this interesting debate to the attention of the scientific community. The group of Prof. Nicolae Hurduc supports the model claiming that the cyclic isomerization of azobenzenes may cause an athermal transition of the glassy azobenzene containing polymer into a fluid state, the so-called photo-fluidization concept. This concept is quite convenient for an intuitive understanding of the deformation process as an anisotropic flow of the polymer material. The group of Prof. Svetlana Santer supports the re-orientational model where the mass-transport of the polymer material accomplished during polymer deformation is stated to be generated by the light-induced re-orientation of the azobenzene side chains and as a consequence of the polymer backbone that in turn results in local mechanical stress, which is enough to irreversibly deform an azobenzene containing material even in the glassy state. For the debate we chose three polymers differing in the glass transition temperature, 32 °C, 87 °C and 95 °C, representing extreme cases of flexible and rigid materials. Polymer film deformation occurring during irradiation with different interference patterns is recorded using a homemade set-up combining an optical part for the generation of interference patterns and an atomic force microscope for acquiring the kinetics of film deformation. We also demonstrated the unique behaviour of azobenzene containing polymeric films to switch the topography in situ and reversibly by changing the irradiation conditions. We discuss the results of reversible deformation of three polymers induced by irradiation with intensity (IIP) and polarization (PIP) interference patterns, and the light of homogeneous intensity in terms of two approaches: the re-orientational and the photo-fluidization concepts. Both agree in that the formation of opto-mechanically induced stresses is a necessary prerequisite for the process of deformation. Using this argument, the deformation process can be characterized either as a flow or mass transport.
We analyse whether a stellar atmosphere model computed with the code CMFGEN provides an optimal description of the stellar observations of WR 136 and simultaneously reproduces the nebular observations of NGC 6888, such as the ionization degree, which is modelled with the pyCloudy code. All the observational material available (far and near UV and optical spectra) were used to constrain such models. We found that the stellar temperature T∗, at τ = 20, can be in a range between 70 000 and 110 000 K, but when using the nebula as an additional restriction, we found that the stellar models with T∗ ∼ 70 000 K represent the best solution for both, the star and the nebula.
Dark matter, DM, has not yet been directly observed, but it has a very solid theoretical basis. There are observations that provide indirect evidence, like galactic rotation curves that show that the galaxies are rotating too fast to keep their constituent parts, and galaxy clusters that bends the light coming from behind-lying galaxies more than expected with respect to the mass that can be calculated from what can be visibly seen. These observations, among many others, can be explained with theories that include DM. The missing piece is to detect something that can exclusively be explained by DM. Direct observation in a particle accelerator is one way and indirect detection using telescopes is another. This thesis is focused on the latter method.
The Very Energetic Radiation Imaging Telescope Array System, V ERITAS, is a telescope array that detects Cherenkov radiation. Theory predicts that DM particles annihilate into, e.g., a γγ pair and create a distinctive energy spectrum when detected by such telescopes, e.i., a monoenergetic line at the same energy as the particle mass. This so called ”smoking-gun” signature is sought with a sliding window line search within the sub-range ∼ 0.3 − 10 TeV of the VERITAS energy range, ∼ 0.01 − 30 TeV.
Standard analysis within the VERITAS collaboration uses Hillas analysis and look-up tables, acquired by analysing particle simulations, to calculate the energy of the particle causing the Cherenkov shower. In this thesis, an improved analysis method has been used. Modelling each shower as a 3Dgaussian should increase the energy recreation quality. Five dwarf spheroidal galaxies were chosen as targets with a total of ∼ 224 hours of data. The targets were analysed individually and stacked. Particle simulations were based on two simulation packages, CARE and GrISU.
Improvements have been made to the energy resolution and bias correction, up to a few percent each, in comparison to standard analysis. Nevertheless, no line with a relevant significance has been detected. The most promising line is at an energy of ∼ 422 GeV with an upper limit cross section of 8.10 · 10^−24 cm^3 s^−1 and a significance of ∼ 2.73 σ, before trials correction and ∼ 1.56 σ after. Upper limit cross sections have also been calculated for the γγ annihilation process and four other outcomes. The limits are in line with current limits using other methods, from ∼ 8.56 · 10^−26 − 6.61 · 10^−23 cm^3s^−1. Future larger telescope arrays, like the upcoming Cherenkov Telescope Array, CTA, will provide better results with the help of this analysis method.
In the context of cosmological structure formation sheets, filaments and eventually halos form due to gravitational instabilities. It is noteworthy, that at all times, the majority of the baryons in the universe does not reside in the dense halos but in the filaments and the sheets of the intergalactic medium. While at higher redshifts of z > 2, these baryons can be detected via the absorption of light (originating from more distant sources) by neutral hydrogen at temperatures of T ~ 10^4 K (the Lyman-alpha forest), at lower redshifts only about 20 % can be found in this state. The remain (about 50 to 70 % of the total baryons mass) is unaccounted for by observational means. Numerical simulations predict that these missing baryons could reside in the filaments and sheets of the cosmic web at high temperatures of T = 10^4.5 - 10^7 K, but only at low to intermediate densities, and constitutes the warm-hot intergalactic medium (WHIM). The high temperatures of the WHIM are caused by the formation of shocks and the subsequent shock-heating of the gas. This results in a high degree of ionization and renders the reliable detection of the WHIM a challenging task. Recent high-resolution hydrodynamical simulations indicate that, at redshifts of z ~ 2, filaments are able to provide very massive galaxies with a significant amount of cool gas at temperatures of T ~ 10^4 K. This could have an important impact on the star-formation in those galaxies. It is therefore of principle importance to investigate the particular hydro- and thermodynamical conditions of these large filament structures. Density and temperature profiles, and velocity fields, are expected to leave their special imprint on spectroscopic observations. A potential multiphase structure may act as tracer in observational studies of the WHIM. In the context of cold streams, it is important to explore the processes, which regulate the amount of gas transported by the streams. This includes the time evolution of filaments, as well as possible quenching mechanisms. In this context, the halo mass range in which cold stream accretion occurs is of particular interest. In order to address these questions, we perform particular hydrodynamical simulations of very high resolution, and investigate the formation and evolution of prototype structures representing the typical filaments and sheets of the WHIM. We start with a comprehensive study of the one-dimensional collapse of a sinusoidal density perturbation (pancake formation) and examine the influence of radiative cooling, heating due to an UV background, thermal conduction, and the effect of small-scale perturbations given by the cosmological power spectrum. We use a set of simulations, parametrized by the wave length of the initial perturbation L. For L ~ 2 Mpc/h the collapse leads to shock-confined structures. As a result of radiative cooling and of heating due to an UV background, a relatively cold and dense core forms. With increasing L the core becomes denser and more concentrated. Thermal conduction enhances this trend and may lead to an evaporation of the core at very large L ~ 30 Mpc/h. When extending our simulations into three dimensions, instead of a pancake structure, we obtain a configuration consisting of well-defined sheets, filaments, and a gaseous halo. For L > 4 Mpc/h filaments form, which are fully confined by an accretion shock. As with the one-dimensional pancakes, they exhibit an isothermal core. Thus, our results confirm a multiphase structure, which may generate particular spectral tracers. We find that, after its formation, the core becomes shielded against further infall of gas onto the filament, and its mass content decreases with time. In the vicinity of the halo, the filament's core can be attributed to the cold streams found in other studies. We show, that the basic structure of these cold streams exists from the very beginning of the collapse process. Further on, the cross section of the streams is constricted by the outwards moving accretion shock of the halo. Thermal conduction leads to a complete evaporation of the cold stream for L > 6 Mpc/h. This corresponds to halos with a total mass higher than M_halo = 10^13 M_sun, and predicts that in more massive halos star-formation can not be sustained by cold streams. Far away from the gaseous halo, the temperature gradients in the filament are not sufficiently strong for thermal conduction to be effective.
This work reviews the literature on an alleged global warming 'pause' in global mean surface temperature (GMST) to determine how it has been defined, what time intervals are used to characterise it, what data are used to measure it, and what methods used to assess it. We test for 'pauses', both in the normally understood meaning of the term to mean no warming trend, as well as for a 'pause' defined as a substantially slower trend in GMST. The tests are carried out with the historical versions of GMST that existed for each pause-interval tested, and with current versions of each of the GMST datasets. The tests are conducted following the common (but questionable) practice of breaking the linear fit at the start of the trend interval ('broken' trends), and also with trends that are continuous with the data bordering the trend interval. We also compare results when appropriate allowance is made for the selection bias problem. The results show that there is little or no statistical evidence for a lack of trend or slower trend in GMST using either the historical data or the current data. The perception that there was a 'pause' in GMST was bolstered by earlier biases in the data in combination with incomplete statistical testing.
A novel atomic beam splitter, using reflection of atoms off an evanescent light wave, is investigated theoretically. The intensity or frequency of the light is modulated in order to create sidebands on the reflected de Broglie wave. The weights and phases of the various sidevands are calculated using three different approaches: the Born approximation, a semiclassical path integral approach, and a numerical solution of the time-dependent Schrdinger equation. We show how this modulated mirror could be used to build practical atomic interferometers.
We consider a sequential cascade of molecular first-reaction events towards a terminal reaction centre in which each reaction step is controlled by diffusive motion of the particles. The model studied here represents a typical reaction setting encountered in diverse molecular biology systems, in which, e.g. a signal transduction proceeds via a series of consecutive 'messengers': the first messenger has to find its respective immobile target site triggering a launch of the second messenger, the second messenger seeks its own target site and provokes a launch of the third messenger and so on, resembling a relay race in human competitions. For such a molecular relay race taking place in infinite one-, two- and three-dimensional systems, we find exact expressions for the probability density function of the time instant of the terminal reaction event, conditioned on preceding successful reaction events on an ordered array of target sites. The obtained expressions pertain to the most general conditions: number of intermediate stages and the corresponding diffusion coefficients, the sizes of the target sites, the distances between them, as well as their reactivities are arbitrary.
Additive Manufacturing (AM) in terms of laser powder-bed fusion (L-PBF) offers new prospects regarding the design of parts and enables therefore the production of lattice structures. These lattice structures shall be implemented in various industrial applications (e.g. gas turbines) for reasons of material savings or cooling channels. However, internal defects, residual stress, and structural deviations from the nominal geometry are unavoidable.
In this work, the structural integrity of lattice structures manufactured by means of L-PBF was non-destructively investigated on a multiscale approach.
A workflow for quantitative 3D powder analysis in terms of particle size, particle shape, particle porosity, inter-particle distance and packing density was established. Synchrotron computed tomography (CT) was used to correlate the packing density with the particle size and particle shape. It was also observed that at least about 50% of the powder porosity was released during production of the struts.
Struts are the component of lattice structures and were investigated by means of laboratory CT. The focus was on the influence of the build angle on part porosity and surface quality. The surface topography analysis was advanced by the quantitative characterisation of re-entrant surface features. This characterisation was compared with conventional surface parameters showing their complementary information, but also the need for AM specific surface parameters.
The mechanical behaviour of the lattice structure was investigated with in-situ CT under compression and successive digital volume correlation (DVC). The deformation was found to be knot-dominated, and therefore the lattice folds unit cell layer wise.
The residual stress was determined experimentally for the first time in such lattice structures. Neutron diffraction was used for the non-destructive 3D stress investigation. The principal stress directions and values were determined in dependence of the number of measured directions. While a significant uni-axial stress state was found in the strut, a more hydrostatic stress state was found in the knot. In both cases, strut and knot, seven directions were at least needed to find reliable principal stress directions.
Compared to their inorganic counterparts, organic semiconductors suffer from relatively low charge carrier mobilities. Therefore, expressions derived for inorganic solar cells to correlate characteristic performance parameters to material properties are prone to fail when applied to organic devices. This is especially true for the classical Shockley-equation commonly used to describe current-voltage (JV)-curves, as it assumes a high electrical conductivity of the charge transporting material. Here, an analytical expression for the JV-curves of organic solar cells is derived based on a previously published analytical model. This expression, bearing a similar functional dependence as the Shockley-equation, delivers a new figure of merit α to express the balance between free charge recombination and extraction in low mobility photoactive materials. This figure of merit is shown to determine critical device parameters such as the apparent series resistance and the fill factor.
We suggest several ideas which when combined could lead to a new mechanism for long-term pulsations of very hot and luminous stars. These involve the interplay between convection, radiation, atmospheric clumping and winds, which collectively feed back to stellar expansion and contraction. We discuss these ideas and point out the future work required in order to fill in the blanks.
We present the first physical characterization of the young open cluster VVVCL041. We spectroscopically observed the cluster main-sequence stellar population and a very-massive star candidate: WR62-2. CMFGEN modelling to our near-infrared spectra indicates that WR62-2 is a very luminous (10^6.4±0.2 L⊙)and massive (∼ 80M⊙) star.
The paper presents a method that determines, by standard numerical means, the type of mutual relations of fold and flip bifurcations (configured as a so-called communication area) of a map. Equation systems are developed for the computation of points where a transition between areas of different types occurs. Furthermore, it is shown that saddle area<->spring area transitions can exist which have not yet been considered in the literature. Analytical conditions of that transition are derived.
This thesis is focused on the electronic, spin-dependent and dynamical properties of thin magnetic systems. Photoemission-related techniques are combined with synchrotron radiation to study the spin-dependent properties of these systems in the energy and time domains. In the first part of this thesis, the strength of electron correlation effects in the spin-dependent electronic structure of ferromagnetic bcc Fe(110) and hcp Co(0001) is investigated by means of spin- and angle-resolved photoemission spectroscopy. The experimental results are compared to theoretical calculations within the three-body scattering approximation and within the dynamical mean-field theory, together with one-step model calculations of the photoemission process. From this comparison it is demonstrated that the present state of the art many-body calculations, although improving the description of correlation effects in Fe and Co, give too small mass renormalizations and scattering rates thus demanding more refined many-body theories including nonlocal fluctuations. In the second part, it is shown in detail monitoring by photoelectron spectroscopy how graphene can be grown by chemical vapour deposition on the transition-metal surfaces Ni(111) and Co(0001) and intercalated by a monoatomic layer of Au. For both systems, a linear E(k) dispersion of massless Dirac fermions is observed in the graphene pi-band in the vicinity of the Fermi energy. Spin-resolved photoemission from the graphene pi-band shows that the ferromagnetic polarization of graphene/Ni(111) and graphene/Co(0001) is negligible and that graphene on Ni(111) is after intercalation of Au spin-orbit split by the Rashba effect. In the last part, a time-resolved x-ray magnetic circular dichroic-photoelectron emission microscopy study of a permalloy platelet comprising three cross-tie domain walls is presented. It is shown how a fast picosecond magnetic response in the precessional motion of the magnetization can be induced by means of a laser-excited photoswitch. From a comparision to micromagnetic calculations it is demonstrated that the relatively high precessional frequency observed in the experiments is directly linked to the nature of the vortex/antivortex dynamics and its response to the magnetic perturbation. This includes the time-dependent reversal of the vortex core polarization, a process which is beyond the limit of detection in the present experiments.
Fixational eye movements show scaling behaviour of the positional mean-squared displacement with a characteristic transition from persistence to antipersistence for increasing time-lag. These statistical patterns were found to be mainly shaped by microsaccades (fast, small-amplitude movements). However, our re-analysis of fixational eye-movement data provides evidence that the slow component (physiological drift) of the eyes exhibits scaling behaviour of the mean-squared displacement that varies across human participants. These results suggest that drift is a correlated movement that interacts with microsaccades. Moreover, on the long time scale, the mean-squared displacement of the drift shows oscillations, which is also present in the displacement auto-correlation function. This finding lends support to the presence of time-delayed feedback in the control of drift movements. Based on an earlier non-linear delayed feedback model of fixational eye movements, we propose and discuss different versions of a new model that combines a self-avoiding walk with time delay. As a result, we identify a model that reproduces oscillatory correlation functions, the transition from persistence to antipersistence, and microsaccades.
Today, it is well known that galaxies like the Milky Way consist not only of stars but also of gas and dust. The galactic halo, a sphere of gas that surrounds the stellar disk of a galaxy, is especially interesting. It provides a wealth of information about in and outflowing gaseous material towards and away from galaxies and their hierarchical evolution. For the Milky Way, the so-called high-velocity clouds (HVCs), fast moving neutral gas complexes in the halo that can be traced by absorption-line measurements, are believed to play a crucial role in the overall matter cycle in our Galaxy. Over the last decades, the properties of these halo structures and their connection to the local circumgalactic and intergalactic medium (CGM and IGM, respectively) have been investigated in great detail by many different groups. So far it remains unclear, however, to what extent the results of these studies can be transferred to other galaxies in the local Universe. In this thesis, we study the absorption properties of Galactic HVCs and compare the HVC absorption characteristics with those of intervening QSO absorption-line systems at low redshift. The goal of this project is to improve our understanding of the spatial extent and physical conditions of gaseous galaxy halos in the local Universe. In the first part of the thesis we use HST /STIS ultraviolet spectra of more than 40 extragalactic background sources to statistically analyze the absorption properties of the HVCs in the Galactic halo. We determine fundamental absorption line parameters including covering fractions of different weakly/intermediately/highly ionized metals with a particular focus on SiII and MgII. Due to the similarity in the ionization properties of SiII and MgII, we are able to estimate the contribution of HVC-like halo structures to the cross section of intervening strong MgII absorbers at z = 0. Our study implies that only the most massive HVCs would be regarded as strong MgII absorbers, if the Milky Way halo would be seen as a QSO absorption line system from an exterior vantage point. Combining the observed absorption-cross section of Galactic HVCs with the well-known number density of intervening strong MgII absorbers at z = 0, we conclude that the contribution of infalling gas clouds (i.e., HVC analogs) in the halos of Milky Way-type galaxies to the cross section of strong MgII absorbers is 34%. This result indicates that only about one third of the strong MgII absorption can be associated with HVC analogs around other galaxies, while the majority of the strong MgII systems possibly is related to galaxy outflows and winds. The second part of this thesis focuses on the properties of intervening metal absorbers at low redshift. The analysis of the frequency and physical conditions of intervening metal systems in QSO spectra and their relation to nearby galaxies offers new insights into the typical conditions of gaseous galaxy halos. One major aspect in our study was to regard intervening metal systems as possible HVC analogs. We perform a detailed analysis of absorption line properties and line statistics for 57 metal absorbers along 78 QSO sightlines using newly-obtained ultraviolet spectra obtained with HST /COS. We find clear evidence for bimodal distribution in the HI column density in the absorbers, a trend that we interpret as sign for two different classes of absorption systems (with HVC analogs at the high-column density end). With the help of the strong transitions of SiII λ1260, SiIII λ1206, and CIII λ977 we have set up Cloudy photoionization models to estimate the local ionization conditions, gas densities, and metallicities. We find that the intervening absorption systems studied by us have, on average, similar physical conditions as Galactic HVC absorbers, providing evidence that many of them represent HVC analogs in the vicinity of other galaxies. We therefore determine typical halo sizes for SiII, SiIII, and CIII for L = 0.01L∗ and L = 0.05L∗ galaxies. Based on the covering fractions of the different ions in the Galactic halo, we find that, for example, the typical halo size for SiIII is ∼ 160 kpc for L = 0.05L∗ galaxies. We test the plausibility of this result by searching for known galaxies close to the QSO sightlines and at similar redshifts as the absorbers. We find that more than 34% of the measured SiIII absorbers have galaxies associated with them, with the majority of the absorbers indeed being at impact parameters ρ ≤160 kpc.
Actin is one of the most highly conserved proteins in eukaryotes and distinct actin-related proteins with filament-forming properties are even found in prokaryotes. Due to these commonalities, actin-modulating proteins of many species share similar structural properties and proposed functions. The polymerization and depolymerization of actin are critical processes for a cell as they can contribute to shape changes to adapt to its environment and to move and distribute nutrients and cellular components within the cell. However, to what extent functions of actin-binding proteins are conserved between distantly related species, has only been addressed in a few cases. In this work, functions of Coronin-A (CorA) and Actin-interacting protein 1 (Aip1), two proteins involved in actin dynamics, were characterized. In addition, the interchangeability and function of Aip1 were investigated in two phylogenetically distant model organisms. The flowering plant Arabidopsis thaliana (encoding two homologs, AIP1-1 and AIP1-2) and in the amoeba Dictyostelium discoideum (encoding one homolog, DdAip1) were chosen because the functions of their actin cytoskeletons may differ in many aspects. Functional analyses between species were conducted for AIP1 homologs as flowering plants do not harbor a CorA gene.
In the first part of the study, the effect of four different mutation methods on the function of Coronin-A protein and the resulting phenotype in D. discoideum was revealed in two genetic knockouts, one RNAi knockdown and a sudden loss-of-function mutant created by chemical-induced dislocation (CID). The advantages and disadvantages of the different mutation methods on the motility, appearance and development of the amoebae were investigated, and the results showed that not all observed properties were affected with the same intensity. Remarkably, a new combination of Selection-Linked Integration and CID could be established.
In the second and third parts of the thesis, the exchange of Aip1 between plant and amoeba was carried out. For A. thaliana, the two homologs (AIP1-1 and AIP1-2) were analyzed for functionality as well as in D. discoideum. In the Aip1-deficient amoeba, rescue with AIP1-1 was more effective than with AIP1-2. The main results in the plant showed that in the aip1-2 mutant background, reintroduced AIP1-2 displayed the most efficient rescue and A. thaliana AIP1-1 rescued better than DdAip1. The choice of the tagging site was important for the function of Aip1 as steric hindrance is a problem. The DdAip1 was less effective when tagged at the C-terminus, while the plant AIP1s showed mixed results depending on the tag position. In conclusion, the foreign proteins partially rescued phenotypes of mutant plants and mutant amoebae, despite the organisms only being very distantly related in evolutionary terms.
A task-based parallel elliptic solver for numerical relativity with discontinuous Galerkin methods
(2022)
Elliptic partial differential equations are ubiquitous in physics. In numerical relativity---the study of computational solutions to the Einstein field equations of general relativity---elliptic equations govern the initial data that seed every simulation of merging black holes and neutron stars. In the quest to produce detailed numerical simulations of these most cataclysmic astrophysical events in our Universe, numerical relativists resort to the vast computing power offered by current and future supercomputers. To leverage these computational resources, numerical codes for the time evolution of general-relativistic initial value problems are being developed with a renewed focus on parallelization and computational efficiency. Their capability to solve elliptic problems for accurate initial data must keep pace with the increasing detail of the simulations, but elliptic problems are traditionally hard to parallelize effectively.
In this thesis, I develop new numerical methods to solve elliptic partial differential equations on computing clusters, with a focus on initial data for orbiting black holes and neutron stars. I develop a discontinuous Galerkin scheme for a wide range of elliptic equations, and a stack of task-based parallel algorithms for their iterative solution. The resulting multigrid-Schwarz preconditioned Newton-Krylov elliptic solver proves capable of parallelizing over 200 million degrees of freedom to at least a few thousand cores, and already solves initial data for a black hole binary about ten times faster than the numerical relativity code SpEC. I also demonstrate the applicability of the new elliptic solver across physical disciplines, simulating the thermal noise in thin mirror coatings of interferometric gravitational-wave detectors to unprecedented accuracy. The elliptic solver is implemented in the new open-source SpECTRE numerical relativity code, and set up to support simulations of astrophysical scenarios for the emerging era of gravitational-wave and multimessenger astronomy.
In Allefeld & Kurths [2004], we introduced an approach to multivariate phase synchronization analysis in the form of a Synchronization Cluster Analysis (SCA). A statistical model of a synchronization cluster was described, and an abbreviated instruction on how to apply this model to empirical data was given, while an implementation of the corresponding algorithm was (and is) available from the authors. In this letter, the complete details on how the data analysis algorithm is to be derived from the model are filled in.
We have numerically studied the bifurcation properties of a sheet pinch with impenetrable stress-free boundaries. An incompressible, electrically conducting fluid with spatially and temporally uniform kinematic viscosity and magnetic diffusivity is confined between planes at x1=0 and 1. Periodic boundary conditions are assumed in the x2 and x3 directions and the magnetofluid is driven by an electric field in the x3 direction, prescribed on the boundary planes. There is a stationary basic state with the fluid at rest and a uniform current J=(0,0,J3). Surprisingly, this basic state proves to be stable and apparently to be the only time-asymptotic state, no matter how strong the applied electric field and irrespective of the other control parameters of the system, namely, the magnetic Prandtl number, the spatial periods L2 and L3 in the x2 and x3 directions, and the mean values B¯2 and B¯3 of the magnetic-field components in these directions.
An einigen CT-Modellkomplexen in verschiedenen Lösungsmitteln und bei Temperaturen von 113-300 K sollte der Einfluß der Umgebung auf die Form und Lage der Absorption von CT-Komplexen unterschiedlicher Bindungsfestigkeit untersucht werden.
Dazu wurden bekannte Bandenprofilfunktionen auf ihre Anwendbar-keit geprüft. Da eine optimale Anpassung nicht möglich war, wurde eine neue Profilfunktion entwickelt, die eine bessere Beschreibung ergab.
Nach der Bestimmung der Gleichgewichtskonstante und des Extink-tionskoeffizienten konnte mit der Profilfläche das Übergangsmoment berechnet werden.
Die Lösungsmittelabhängigkeit wurde bei verschiedenen Brechzahlen und Dielektrizitätskonstanten untersucht.
Für feste Komplexe wurde eine spezielle Präparationstechnik gewählt. Die beobachteten Feinstrukturen und der auftretende Streuuntergrund werden diskutiert.
This Thesis puts its focus on the physics of neutron stars and its description with methods of numerical relativity. In the first step, a new numerical framework the Whisky2D code will be developed, which solves the relativistic equations of hydrodynamics in axisymmetry. Therefore we consider an improved formulation of the conserved form of these equations. The second part will use the new code to investigate the critical behaviour of two colliding neutron stars. Considering the analogy to phase transitions in statistical physics, we will investigate the evolution of the entropy of the neutron stars during the whole process. A better understanding of the evolution of thermodynamical quantities, like the entropy in critical process, should provide deeper understanding of thermodynamics in relativity. More specifically, we have written the Whisky2D code, which solves the general-relativistic hydrodynamics equations in a flux-conservative form and in cylindrical coordinates. This of course brings in 1/r singular terms, where r is the radial cylindrical coordinate, which must be dealt with appropriately. In the above-referenced works, the flux operator is expanded and the 1/r terms, not containing derivatives, are moved to the right-hand-side of the equation (the source term), so that the left hand side assumes a form identical to the one of the three-dimensional (3D) Cartesian formulation. We call this the standard formulation. Another possibility is not to split the flux operator and to redefine the conserved variables, via a multiplication by r. We call this the new formulation. The new equations are solved with the same methods as in the Cartesian case. From a mathematical point of view, one would not expect differences between the two ways of writing the differential operator, but, of course, a difference is present at the numerical level. Our tests show that the new formulation yields results with a global truncation error which is one or more orders of magnitude smaller than those of alternative and commonly used formulations. The second part of the Thesis uses the new code for investigations of critical phenomena in general relativity. In particular, we consider the head-on-collision of two neutron stars in a region of the parameter space where two final states a new stable neutron star or a black hole, lay close to each other. In 1993, Choptuik considered one-parameter families of solutions, S[P], of the Einstein-Klein-Gordon equations for a massless scalar field in spherical symmetry, such that for every P > P⋆, S[P] contains a black hole and for every P < P⋆, S[P] is a solution not containing singularities. He studied numerically the behavior of S[P] as P → P⋆ and found that the critical solution, S[P⋆], is universal, in the sense that it is approached by all nearly-critical solutions regardless of the particular family of initial data considered. All these phenomena have the common property that, as P approaches P⋆, S[P] approaches a universal solution S[P⋆] and that all the physical quantities of S[P] depend only on |P − P⋆|. The first study of critical phenomena concerning the head-on collision of NSs was carried out by Jin and Suen in 2007. In particular, they considered a series of families of equal-mass NSs, modeled with an ideal-gas EOS, boosted towards each other and varied the mass of the stars, their separation, velocity and the polytropic index in the EOS. In this way they could observe a critical phenomenon of type I near the threshold of black-hole formation, with the putative solution being a nonlinearly oscillating star. In a successive work, they performed similar simulations but considering the head-on collision of Gaussian distributions of matter. Also in this case they found the appearance of type-I critical behaviour, but also performed a perturbative analysis of the initial distributions of matter and of the merged object. Because of the considerable difference found in the eigenfrequencies in the two cases, they concluded that the critical solution does not represent a system near equilibrium and in particular not a perturbed Tolmann-Oppenheimer-Volkoff (TOV) solution. In this Thesis we study the dynamics of the head-on collision of two equal-mass NSs using a setup which is as similar as possible to the one considered above. While we confirm that the merged object exhibits a type-I critical behaviour, we also argue against the conclusion that the critical solution cannot be described in terms of equilibrium solution. Indeed, we show that, in analogy with what is found in, the critical solution is effectively a perturbed unstable solution of the TOV equations. Our analysis also considers fine-structure of the scaling relation of type-I critical phenomena and we show that it exhibits oscillations in a similar way to the one studied in the context of scalar-field critical collapse.
We present results from our near-infrared spectroscopy with VLT/ISAAC of four, massive eclipsing binary systems in the young, heavily reddened, massive Danks clusters. We derive accurate fundamental parameters and the distance to these massive systems, which comprise of OIf+, WR and O-type stars. Our goal is to increase the sample of well-studied WR stars and constrain their physics by comparison with evolutionary models.
Gravitational-wave (GW) astrophysics is a field in full blossom. Since the landmark detection of GWs from a binary black hole on September 14th 2015, fifty-two compact-object binaries have been reported by the LIGO-Virgo collaboration. Such events carry astrophysical and cosmological information ranging from an understanding of how black holes and neutron stars are formed, what neutron stars are composed of, how the Universe expands, and allow testing general relativity in the highly-dynamical strong-field regime. It is the goal of GW astrophysics to extract such information as accurately as possible. Yet, this is only possible if the tools and technology used to detect and analyze GWs are advanced enough. A key aspect of GW searches are waveform models, which encapsulate our best predictions for the gravitational radiation under a certain set of parameters, and that need to be cross-correlated with data to extract GW signals. Waveforms must be very accurate to avoid missing important physics in the data, which might be the key to answer the fundamental questions of GW astrophysics. The continuous improvements of the current LIGO-Virgo detectors, the development of next-generation ground-based detectors such as the Einstein Telescope or the Cosmic Explorer, as well as the development of the Laser Interferometer Space Antenna (LISA), demand accurate waveform models. While available models are enough to capture the low spins, comparable-mass binaries routinely detected in LIGO-Virgo searches, those for sources from both current and next-generation ground-based and spaceborne detectors must be accurate enough to detect binaries with large spins and asymmetry in the masses. Moreover, the thousands of sources that we expect to detect with future detectors demand accurate waveforms to mitigate biases in the estimation of signals’ parameters due to the presence of a foreground of many sources that overlap in the frequency band. This is recognized as one of the biggest challenges for the analysis of future-detectors’ data, since biases might hinder the extraction of important astrophysical and cosmological information from future detectors’ data. In the first part of this thesis, we discuss how to improve waveform models for binaries with high spins and asymmetry in the masses. In the second, we present the first generic metrics that have been proposed to predict biases in the presence of a foreground of many overlapping signals in GW data.
For the first task, we will focus on several classes of analytical techniques. Current models for LIGO and Virgo studies are based on the post-Newtonian (PN, weak-field, small velocities) approximation that is most natural for the bound orbits that are routinely detected in GW searches. However, two other approximations have risen in prominence, the post-Minkowskian (PM, weak- field only) approximation natural for unbound (scattering) orbits and the small-mass-ratio (SMR) approximation typical of binaries in which the mass of one body is much bigger than the other. These are most appropriate to binaries with high asymmetry in the masses that challenge current waveform models. Moreover, they allow one to “cover” regions of the parameter space of coalescing binaries, thereby improving the interpolation (and faithfulness) of waveform models. The analytical approximations to the relativistic two-body problem can synergically be included within the effective-one-body (EOB) formalism, in which the two-body information from each approximation can be recast into an effective problem of a mass orbiting a deformed Schwarzschild (or Kerr) black hole. The hope is that the resultant models can cover both the low-spin comparable-mass binaries that are routinely detected, and the ones that challenge current models. The first part of this thesis is dedicated to a study about how to best incorporate information from the PN, PM, SMR and EOB approaches in a synergistic way. We also discuss how accurate the resulting waveforms are, as compared against numerical-relativity (NR) simulations. We begin by comparing PM models, whether alone or recast in the EOB framework, against PN models and NR simulations. We will show that PM information has the potential to improve currently-employed models for LIGO and Virgo, especially if recast within the EOB formalism. This is very important, as the PM approximation comes with a host of new computational techniques from particle physics to exploit. Then, we show how a combination of PM and SMR approximations can be employed to access previously-unknown PN orders, deriving the third subleading PN dynamics for spin-orbit and (aligned) spin1-spin2 couplings. Such new results can then be included in the EOB models currently used in GW searches and parameter estimation studies, thereby improving them when the binaries have high spins. Finally, we build an EOB model for quasi-circular nonspinning binaries based on the SMR approximation (rather than the PN one as usually done). We show how this is done in detail without incurring in the divergences that had affected previous attempts, and compare the resultant model against NR simulations. We find that the SMR approximation is an excellent approximation for all (quasi-circular nonspinning) binaries, including both the equal-mass binaries that are routinely detected in GW searches and the ones with highly asymmetric masses. In particular, the SMR-based models compare much better than the PN models, suggesting that SMR-informed EOB models might be the key to model binaries in the future. In the second task of this thesis, we work within the linear-signal ap- proximation and describe generic metrics to predict inference biases on the parameters of a GW source of interest in the presence of confusion noise from unfitted foregrounds and from residuals of other signals that have been incorrectly fitted out. We illustrate the formalism with simple (yet realistic) LISA sources, and demonstrate its validity against Monte-Carlo simulations. The metrics we describe pave the way for more realistic studies to quantify the biases with future ground-based and spaceborne detectors.
The Cluster mission has produced a large data set of electron flux measurements in the Earth's magnetosphere since its launch in late 2000. Electron fluxes are measured using Research with Adaptive Particle Imaging Detector (RAPID)/Imaging Electron Spectrometer (IES) detector as a function of energy, pitch angle, spacecraft position, and time. However, no adiabatic invariants have been calculated for Cluster so far. In this paper we present a step-by-step guide to calculations of adiabatic invariants and conversion of the electron flux to phase space density (PSD) in these coordinates. The electron flux is measured in two RAPID/IES energy channels providing pitch angle distribution at energies 39.2-50.5 and 68.1-94.5 keV in nominal mode since 2004. A fitting method allows to expand the conversion of the differential fluxes to the range from 40 to 150 keV. Best data coverage for phase space density in adiabatic invariant coordinates can be obtained for values of second adiabatic invariant, K, similar to 10(2), and values of the first adiabatic invariant mu in the range approximate to 5-20 MeV/G. Furthermore, we describe the production of a new data product "LSTAR," equivalent to the third adiabatic invariant, available through the Cluster Science Archive for years 2001-2018 with 1-min resolution. The produced data set adds to the availability of observations in Earth's radiation belts region and can be used for long-term statistical purposes.
In dieser Arbeit wurden zwei Themenbereiche bearbeitet: 1. Ellipsometrie an Adsorpionsschichten niedermolekularer Tenside an der Wasser/Luft-Grenzfläche (Ellipsometrie ist geeignet, adsorbierte Mengen von nicht- und zwitterionischen Tensiden zu messen, bei ionischen werden zusätzlich die Gegenionen mit erfaßt; Ellipsometrie mißt sich ändernde Gegenionenverteilung). 2. Ellipsometrische Untersuchung von endadsorbierten Polymerbürsten an der Wasser/Öl-Grenzfläche (Ellipsometrie ist nicht in der Lage, verschiedene Segmentkonzentrationsprofile innerhalb der Bürste aufzulösen, ist aber sehr wohl geeignet, Skalengesetze für Dicken und Drücke in Abhängigkeit von Ankerdichte und Kettenlänge der Polymere zu überprüfen; für in Heptan gequollene Poly-isobuten-Bürsten konnte gezeigt werden, daß sie sich entsprechend den theoretischen Vorhersagen für Bürsten in einem theta-Lösungsmittel verhalten)
The separation of natural and anthropogenically caused climatic changes is an important task of contemporary climate research. For this purpose, a detailed knowledge of the natural variability of the climate during warm stages is a necessary prerequisite. Beside model simulations and historical documents, this knowledge is mostly derived from analyses of so-called climatic proxy data like tree rings or sediment as well as ice cores. In order to be able to appropriately interpret such sources of palaeoclimatic information, suitable approaches of statistical modelling as well as methods of time series analysis are necessary, which are applicable to short, noisy, and non-stationary uni- and multivariate data sets. Correlations between different climatic proxy data within one or more climatological archives contain significant information about the climatic change on longer time scales. Based on an appropriate statistical decomposition of such multivariate time series, one may estimate dimensions in terms of the number of significant, linear independent components of the considered data set. In the presented work, a corresponding approach is introduced, critically discussed, and extended with respect to the analysis of palaeoclimatic time series. Temporal variations of the resulting measures allow to derive information about climatic changes. For an example of trace element abundances and grain-size distributions obtained near the Cape Roberts (Eastern Antarctica), it is shown that the variability of the dimensions of the investigated data sets clearly correlates with the Oligocene/Miocene transition about 24 million years before present as well as regional deglaciation events. Grain-size distributions in sediments give information about the predominance of different transportation as well as deposition mechanisms. Finite mixture models may be used to approximate the corresponding distribution functions appropriately. In order to give a complete description of the statistical uncertainty of the parameter estimates in such models, the concept of asymptotic uncertainty distributions is introduced. The relationship with the mutual component overlap as well as with the information missing due to grouping and truncation of the measured data is discussed for a particular geological example. An analysis of a sequence of grain-size distributions obtained in Lake Baikal reveals that there are certain problems accompanying the application of finite mixture models, which cause an extended climatological interpretation of the results to fail. As an appropriate alternative, a linear principal component analysis is used to decompose the data set into suitable fractions whose temporal variability correlates well with the variations of the average solar insolation on millenial to multi-millenial time scales. The abundance of coarse-grained material is obviously related to the annual snow cover, whereas a significant fraction of fine-grained sediments is likely transported from the Taklamakan desert via dust storms in the spring season.
When azobenzene-modified photosensitive polymer films are irradiated with light interference patterns, topographic variations in the film develop that follow the electric field vector distribution resulting in the formation of surface relief grating (SRG). The exact correspondence of the electric field vector orientation in interference pattern in relation to the presence of local topographic minima or maxima of SRG is in general difficult to determine. In my thesis, we have established a systematic procedure to accomplish the correlation between different interference patterns and the topography of SRG. For this, we devise a new setup combining an atomic force microscope and a two-beam interferometer (IIAFM). With this set-up, it is possible to track the topography change in-situ, while at the same time changing polarization and phase of the impinging interference pattern. To validate our results, we have compared two photosensitive materials named in short as PAZO and trimer. This is the first time that an absolute correspondence between the local distribution of electric field vectors of interference pattern and the local topography of the relief grating could be established exhaustively. In addition, using our IIAFM we found that for a certain polarization combination of two orthogonally polarized interfering beams namely SP (↕, ↔) interference pattern, the topography forms SRG with only half the period of the interference patterns. Exploiting this phenomenon we are able to fabricate surface relief structures below diffraction limit with characteristic features measuring only 140 nm, by using far field optics with a wavelength of 491 nm. We have also probed for the stresses induced during the polymer mass transport by placing an ultra-thin gold film on top (5–30 nm). During irradiation, the metal film not only deforms along with the SRG formation, but ruptures in regular and complex manner. The morphology of the cracks differs strongly depending on the electric field distribution in the interference pattern even when the magnitude and the kinetic of the strain are kept constant. This implies a complex local distribution of the opto-mechanical stress along the topography grating. The neutron reflectivity measurements of the metal/polymer interface indicate the penetration of metal layer within the polymer resulting in the formation of bonding layer that confirms the transduction of light induced stresses in the polymer layer to a metal film.
Advancing charge selective contacts for efficient monolithic perovskite-silicon tandem solar cells
(2019)
Hybrid organic-inorganic perovskites are one of the most promising material classes for photovoltaic energy conversion. In solar cells, the perovskite absorber is sandwiched between n- and p-type contact layers which selectively transport electrons and holes to the cell’s cathode and anode, respectively. This thesis aims to advance contact layers in perovskite solar cells and unravel the impact of interface and contact properties on the device performance. Further, the contact materials are applied in monolithic perovskite-silicon heterojunction (SHJ) tandem solar cells, which can overcome the single junction efficiency limits and attract increasing attention. Therefore, all contact layers must be highly transparent to foster light harvesting in the tandem solar cell design. Besides, the SHJ device restricts processing temperatures for the selective contacts to below 200°C.
A comparative study of various electron selective contact materials, all processed below 180°C, in n-i-p type perovskite solar cells highlights that selective contacts and their interfaces to the absorber govern the overall device performance. Combining fullerenes and metal-oxides in a TiO2/PC60BM (phenyl-C60-butyric acid methyl ester) double-layer contact allows to merge good charge extraction with minimized interface recombination. The layer sequence thereby achieved high stabilized solar cell performances up to 18.0% and negligible current-voltage hysteresis, an otherwise pronounced phenomenon in this device design. Double-layer structures are therefore emphasized as a general concept to establish efficient and highly selective contacts.
Based on this success, the concept to combine desired properties of different materials is transferred to the p-type contact. Here, a mixture of the small molecule Spiro-OMeTAD [2,2’,7,7’-tetrakis(N,N-di-p-methoxyphenylamine)-9,9’-spirobifluoren] and the doped polymer PEDOT [poly(3,4-ethylenedioxythiophene)] is presented as a novel hole selective contact. PEDOT thereby remarkably suppresses charge recombination at the perovskite surface, allowing an increase of quasi-Fermi level splitting in the absorber. Further, the addition of Spiro-OMeTAD into the PEDOT layer is shown to enhance charge extraction at the interface and allow high efficiencies up to 16.8%.
Finally, the knowledge on contact properties is applied to monolithic perovskite-SHJ tandem solar cells. The main goal is to optimize the top contact stack of doped Spiro-OMeTAD/molybdenum oxide(MoOx)/ITO towards higher transparency by two different routes. First, fine-tuning of the ITO deposition to mitigate chemical reduction of MoOx and increase the transmittance of MoOx/ITO stacks by 25%. Second, replacing Spiro-OMeTAD with the alternative hole transport materials PEDOT/Spiro-OMeTAD mixtures, CuSCN or PTAA [poly(triaryl amine)]. Experimental results determine layer thickness constrains and validate optical simulations, which subsequently allow to realistically estimate the respective tandem device performances. As a result, PTAA represents the most promising replacement for Spiro-OMeTAD, with a projected increase of the optimum tandem device efficiency for the herein used architecture by 2.9% relative to 26.5% absolute. The results also reveal general guidelines for further performance gains of the technology.
The atmosphere over the Arctic Ocean is strongly influenced by the distribution of sea ice and open water. Leads in the sea ice produce strong convective fluxes of sensible and latent heat and release aerosol particles into the atmosphere. They increase the occurrence of clouds and modify the structure and characteristics of the atmospheric boundary layer (ABL) and thereby influence the Arctic climate.
In the course of this study aircraft measurements were performed over the western Arctic Ocean as part of the campaign PAMARCMIP 2012 of the Alfred Wegener Institute for Polar and Marine Research (AWI). Backscatter from aerosols and clouds within the lower troposphere and the ABL were measured with the nadir pointing Airborne Mobile Aerosol Lidar (AMALi) and dropsondes were launched to obtain profiles of meteorological variables. Furthermore, in situ measurements of aerosol properties, meteorological variables and turbulence were part of the campaign. The measurements covered a broad range of atmospheric and sea ice conditions.
In this thesis, properties of the ABL over Arctic sea ice with a focus on the influence of open leads are studied based on the data from the PAMARCMIP campaign. The height of the ABL is determined by different methods that are applied to dropsonde and AMALi backscatter profiles. ABL heights are compared for different flights representing different conditions of the atmosphere and of sea ice and open water influence. The different criteria for ABL height that are applied show large variation in terms of agreement among each other, depending on the characteristics of the ABL and its history. It is shown that ABL height determination from lidar backscatter by methods commonly used under mid-latitude conditions is applicable to the Arctic ABL only under certain conditions. Aerosol or clouds within the ABL are needed as a tracer for ABL height detection from backscatter. Hence an aerosol source close to the surface is necessary, that is typically found under the present influence of open water and therefore convective conditions. However it is not always possible to distinguish residual layers from the actual ABL. Stable boundary layers are generally difficult to detect.
To illustrate the complexity of the Arctic ABL and processes therein, four case studies are analyzed each of which represents a snapshot of the interplay between atmosphere and underlying sea ice or water surface. Influences of leads and open water on the aerosol and clouds within the ABL are identified and discussed. Leads are observed to cause the formation of fog and cloud layers within the ABL by humidity emission. Furthermore they decrease the stability and increase the height of the ABL and consequently facilitate entrainment of air and aerosol layers from the free troposphere.
Due to the unique environmental conditions and different feedback mechanisms, the Arctic region is especially sensitive to climate changes. The influence of clouds on the radiation budget is substantial, but difficult to quantify and parameterize in models. In the framework of the PhD, elastic backscatter and depolarization lidar observations of Arctic clouds were performed during the international Arctic Study of Tropospheric Aerosol, Clouds and Radiation (ASTAR) from Svalbard in March and April 2007. Clouds were probed above the inaccessible Arctic Ocean with a combination of airborne instruments: The Airborne Mobile Aerosol Lidar (AMALi) of the Alfred Wegener Institute for Polar and Marine Research provided information on the vertical and horizontal extent of clouds along the flight track, optical properties (backscatter coefficient), and cloud thermodynamic phase. From the data obtained by the spectral albedometer (University of Mainz), the cloud phase and cloud optical thickness was deduced. Furthermore, in situ observations with the Polar Nephelometer, Cloud Particle Imager and Forward Scattering Spectrometer Probe (Laboratoire de Météorologie Physique, France) provided information on the microphysical properties, cloud particle size and shape, concentration, extinction, liquid and ice water content. In the thesis, a data set of four flights is analyzed and interpreted. The lidar observations served to detect atmospheric structures of interest, which were then probed by in situ technique. With this method, an optically subvisible ice cloud was characterized by the ensemble of instruments (10 April 2007). Radiative transfer simulations based on the lidar, radiation and in situ measurements allowed the calculation of the cloud forcing, amounting to -0.4 W m-2. This slight surface cooling is negligible on a local scale. However, thin Arctic clouds have been reported more frequently in winter time, when the clouds' effect on longwave radiation (a surface warming of 2.8 W m-2) is not balanced by the reduced shortwave radiation (surface cooling). Boundary layer mixed-phase clouds were analyzed for two days (8 and 9 April 2007). The typical structure consisting of a predominantly liquid water layer on cloud top and ice crystals below were confirmed by all instruments. The lidar observations were compared to European Centre for Medium-Range Weather Forecasts (ECMWF) meteorological analyses. A change of air masses along the flight track was evidenced in the airborne data by a small completely glaciated cloud part within the mixed-phase cloud system. This indicates that the updraft necessary for the formation of new cloud droplets at cloud top is disturbed by the mixing processes. The measurements served to quantify the shortcomings of the ECMWF model to describe mixed-phase clouds. As the partitioning of cloud condensate into liquid and ice water is done by a diagnostic equation based on temperature, the cloud structures consisting of a liquid cloud top layer and ice below could not be reproduced correctly. A small amount of liquid water was calculated for the lowest (and warmest) part of the cloud only. Further, the liquid water content was underestimated by an order of magnitude compared to in situ observations. The airborne lidar observations of 9 April 2007 were compared to space borne lidar data on board of the satellite Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO). The systems agreed about the increase of cloud top height along the same flight track. However, during the time delay of 1 h between the lidar measurements, advection and cloud processing took place, and a detailed comparison of small-scale cloud structures was not possible. A double layer cloud at an altitude of 4 km was observed with lidar at the West coast in the direct vicinity of Svalbard (14 April 2007). The cloud system consisted of two geometrically thin liquid cloud layers (each 150 m thick) with ice below each layer. While the upper one was possibly formed by orographic lifting under the influence of westerly winds, or by the vertical wind shear shown by ECMWF analyses, the lower one might be the result of evaporating precipitation out of the upper layer. The existence of ice precipitation between the two layers supports the hypothesis that humidity released from evaporating precipitation was cooled and consequently condensed as it experienced the radiative cooling from the upper layer. In summary, a unique data set characterizing tropospheric Arctic clouds was collected with lidar, in situ and radiation instruments. The joint evaluation with meteorological analyses allowed a detailed insight in cloud properties, cloud evolution processes and radiative effects.
Die Arbeit beschreibt die Analyse von Beobachtungen zweier Sonnenflecken in zweidimensionaler Spektro-Polarimetrie. Die Daten wurden mit dem Fabry-Pérot-Interferometer der Universität Göttingen am Vakuum-Turm-Teleskop auf Teneriffa erfasst. Von der aktiven Region NOAA 9516 wurde der volle Stokes-Vektor des polarisierten Lichts in der Absorptionslinie bei 630,249 nm in Einzelaufnahmen beobachtet, und von der aktiven Region NOAA 9036 wurde bei 617,3 nm Wellenlänge eine 90-minütige Zeitserie des zirkular polarisierten Lichts aufgezeichnet. Aus den reduzierten Daten werden Ergebniswerte für Intensität, Geschwindigkeit in Beobachtungsrichtung, magnetische Feldstärke sowie verschiedene weitere Plasmaparameter abgeleitet. Mehrere Ansätze zur Inversion solarer Modellatmosphären werden angewendet und verglichen. Die teilweise erheblichen Fehlereinflüsse werden ausführlich diskutiert. Das Frequenzverhalten der Ergebnisse und Abhängigkeiten nach Ort und Zeit werden mit Hilfe der Fourier- und Wavelet-Transformation weiter analysiert. Als Resultat lässt sich die Existenz eines hochfrequenten Bandes für Geschwindigkeitsoszillationen mit einer zentralen Frequenz von 75 Sekunden (13 mHz) bestätigen. In größeren photosphärischen Höhen von etwa 500 km entstammt die Mehrheit der damit zusammenhängenden Schockwellen den dunklen Anteilen der Granulen, im Unterschied zu anderen Frequenzbereichen. Die 75-Sekunden-Oszillationen werden ebenfalls in der aktiven Region beobachtet, vor allem in der Lichtbrücke. In den identifizierten Bändern oszillatorischer Power der Geschwindigkeit sind in einer dunklen, penumbralen Struktur sowie in der Lichtbrücke ausgeprägte Strukturen erkennbar, die sich mit einer Horizontalgeschwindigkeit von 5-8 km/s in die ruhige Sonne bewegen. Diese zeigen einen deutlichen Anstieg der Power, vor allem im 5-Minuten-Band, und stehen möglicherweise in Zusammenhang mit dem Phänomen der „Evershed-clouds“. Eingeschränkt durch ein sehr geringes Signal-Rausch-Verhältnis und hohe Fehlereinflüsse werden auch Magnetfeldvariationen mit einer Periode von sechs Minuten am Übergang von Umbra zu Penumbra in der Nähe einer Lichtbrücke beobachtet. Um die beschriebenen Resultate zu erzielen, wurden bestehende Visualisierungsverfahren der Frequenzanalyse verbessert oder neu entwickelt, insbesondere für Ergebnisse der Wavelet-Transformation.
Die Klangeigenschaften von Musikinstrumenten werden durch das Zusammenwirken der auf ihnen anregbaren akustischen Schwingungsmoden bestimmt, welche sich wiederum aus der geometrischen Struktur des Resonators in Kombination mit den verwendeten Materialien ergeben. In dieser Arbeit wurde das Schwingungsverhalten von Streichinstrumenten durch den Einsatz minimal-invasiver piezoelektrischer Polymerfilmsensoren untersucht. Die studierten Kopplungsphänomene umfassen den sogenannten Wolfton und Schwingungstilger, die zu dessen Abschwächung verwendet werden, sowie die gegenseitige Beeinflussung von Bogen und Instrument beim Spielvorgang. An Dielektrischen Elastomeraktormembranen wurde dagegen der Einfluss der elastischen Eigenschaften des Membranmaterials auf das akustische und elektromechanische Schwingungsverhalten gezeigt. Die Dissertation gliedert sich in drei Teile, deren wesentliche Ergebnisse im Folgenden zusammengefasst werden.
In Teil I wurde die Funktionsweise eines abstimmbaren Schwingungstilgers zur Dämpfung von Wolftönen auf Streichinstrumenten untersucht. Durch Abstimmung der Resonanzfrequenz des Schwingungstilgers auf die Wolftonfrequenz kann ein Teil der Saitenschwingungen absorbiert werden, so dass die zu starke Anregung der Korpusresonanz vermieden wird, die den Wolfton verursacht. Der Schwingungstilger besteht aus einem „Wolftöter“, einem Massestück, welches auf der Nachlänge der betroffenen Saite (zwischen Steg und Saitenhalter) installiert wird. Hier wurde gezeigt, wie die Resonanzen dieses Schwingungstilgers von der Masse des Wolftöters und von dessen Position auf der Nachlänge abhängen. Aber auch die Geometrie des Wolftöters stellte sich als ausschlaggebend heraus, insbesondere bei einem nicht-rotationssymmetrischen Wolftöter: In diesem Fall entsteht – basierend auf den zu erwartenden nicht-harmonischen Moden einer massebelasteten Saite – eine zusätzliche Mode, die von der Polarisationsrichtung der Saitenschwingung abhängt.
Teil II der Dissertation befasst sich mit Elastomermembranen, die als Basis von Dielektrischen Elastomeraktoren dienen, und die wegen der Membranspannung auch akustische Resonanzen aufweisen. Die Ansprache von Elastomeraktoren hängt unter anderem von der Geschwindigkeit der elektrischen Anregung ab. Die damit zusammenhängenden viskoelastischen Eigenschaften der hier verwendeten Elastomere, Silikon und Acrylat, wurden einerseits in einer frequenzabhängigen dynamisch-mechanischen Analyse des Elastomers erfasst, andererseits auch optisch an vollständigen Aktoren selbst gemessen. Die höhere Viskosität des Acrylats, das bei tieferen Frequenzen höhere Aktuationsdehnungen als das Silikon zeigt, führt zu einer Verminderung der Dehnungen bei höheren Frequenzen, so dass über etwa 40 Hertz mit Silikon größere Aktuationsdehnungen erreicht werden. Mit den untersuchten Aktoren konnte die Gitterkonstante weicher optischer Beugungsgitter kontrolliert werden, die als zusätzlicher Film auf der Membran installiert wurden. Über eine Messung der akustischen Resonanzfrequenz von Elastomermebranen aus Acrylat in 1Abhängigkeit von ihrer Vorstreckung konnte in Verbindung mit einer Modellierung des hyperelastischen Verhaltens des Elastomers (Ogden-Modell) der Schermodul bestimmt werden.
Schließlich wird in Teil III die Untersuchung von Geigen und ihrer Streichanregung mit Hilfe minimal-invasiver piezoelektrischer Polymerfilme geschildert. Es konnten am Bogen und am Steg von Geigen – unter den beiden Füßen des Stegs – jeweils zwei Filmsensoren installiert werden. Mit den beiden Sensoren am Steg wurden Frequenzgänge von Geigen gemessen, welche eine Bestimmung der frequenzabhängigen Stegbewegung erlaubten. Diese Methode ermöglicht damit auch eine umfassende Charakterisierung der Signaturmoden in Bezug auf die Stegdynamik. Die Ergebnisse der komplementären Methoden von Impulsanregung und natürlichem Spielen der Geigen konnten dank der Sensoren verglichen werden. Für die Nutzung der Sensoren am Bogen – insbesondere für eine Messung des Bogendrucks – wurde eine Kalibrierung des Bogen-Sensor-Systems mit Hilfe einer Materialprüfmaschine durchgeführt. Bei einer Messung während des natürlichen Spielens wurde mit den Sensoren am Bogen einerseits die Übertragung der Saitenschwingung auf den Bogen festgestellt. Dabei konnten außerdem longitudinale Bogenhaarresonanzen identifiziert werden, die von der Position der Saite auf dem Bogen abhängen. Aus der Analyse dieses Phänomens konnte die longitudinale Wellengeschwindigkeit der Bogenhaare bestimmt werden, die eine wichtige Größe für die Kopplung zwischen Saite und Bogen ist. Mit Hilfe des Systems aus Sensoren an Bogen und Steg werden auf Grundlage der vorliegenden Arbeit Studien an Streichinstrumenten vorgeschlagen, in denen die Bespielbarkeit der Instrumente zu den jeweils angeregten Steg- und Bogenschwingungen in Beziehung gesetzt werden kann. Damit könnte nicht zuletzt auch die bisher nicht vollständig geklärte Rolle des Bogens für Klang und Bespielbarkeit besser beurteilt werden
In this thesis we provide a construction of the operator framework starting from the functional formulation of group field theory (GFT). We define operator algebras on Hilbert spaces whose expectation values in specific states provide correlation functions of the functional formulation. Our construction allows us to give a direct relation between the ingredients of the functional GFT and its operator formulation in a perturbative regime. Using this construction we provide an example of GFT states that can not be formulated as states in a Fock space and lead to math- ematically inequivalent representations of the operator algebra. We show that such inequivalent representations can be grouped together by their symmetry properties and sometimes break the left translation symmetry of the GFT action. We interpret these groups of inequivalent representations as phases of GFT, similar to the classification of phases that we use in QFT’s on space-time.
Due to advances in science and technology towards smaller and more powerful processing units, the fabrication of micrometer sized machines for different tasks becomes more and more possible. Such micro-robots could revolutionize medical treatment of diseases and shall support to work on other small machines. Nevertheless, scaling down robots and other devices is a challenging task and will probably remain limited in near future. Over the past decade the concept of bio-hybrid systems has proved to be a promising approach in order to advance the further development of micro-robots. Bio-hybrid systems combine biological cells with artificial components, thereby benefiting from the functionality of living biological cells. Cell-driven micro-transport is one of the most prominent applications in the emerging field of these systems. So far, micrometer sized cargo has been successfully transported by means of swimming bacterial cells. The potential of motile adherent cells as transport systems has largely remained unexplored.
This thesis concentrates on the social amoeba Dictyostelium discoideum as a potential candidate for an amoeboid bio-hybrid transport system. The use of this model organism comes with several advantages. Due to the unspecific properties of Dictyostelium adhesion, a wide range of different cargo materials can be used for transport. As amoeboid cells exceed bacterial cells in size by one order of magnitude, also the size of an object carried by a single cell can also be much larger for an amoeba. Finally it is possible to guide the cell-driven transport based on the chemotactic behavior of the amoeba. Since cells undergo a developmentally induced chemotactic aggregation, cargo could be assembled in a self-organized manner into a cluster. It is also possible to impose an external chemical gradient to guide the amoeboid transport system to a desired location.
To establish Dictyostelium discoideum as a possible candidate for bio-hybrid transport systems, this thesis will first investigate the movement of single cells. Secondly, the interaction of cargo and cells will be studied. Eventually, a conceptional proof will be conducted, that the cheomtactic behavior can be exploited either to transport a cargo self-organized or through an external chemical source.
The aim of this paper is to describe an efficient strategy for descritizing ill-posed linear operator equations of the first kind: we consider Tikhonov-Phillips-regularization χ^δ α = (a * a + α I)^-1 A * y ^δ with a finite dimensional approximation A n instead of A. We propose a sparse matrix structure which still leads to optimal convergences rates but requires substantially less scalar products for computing A n compared with standard methods.
A method for the multivariate analysis of statistical phase synchronization phenomena in empirical data is presented. A first statistical approach is complemented by a stochastic dynamic model, to result in a data analysis algorithm which can in a specific sense be shown to be a generic multivariate statistical phase synchronization analysis. The method is applied to EEG data from a psychological experiment, obtaining results which indicate the relevance of this method in the context of cognitive science as well as in other fields.
Droughts in tropical South America have an imminent and severe impact on the Amazon rainforest and affect the livelihoods of millions of people. Extremely dry conditions in Amazonia have been previously linked to sea surface temperature (SST) anomalies in the adjacent tropical oceans. Although the sources and impacts of such droughts have been widely studied, establishing reliable multi-year lead statistical forecasts of their occurrence is still an ongoing challenge. Here, we further investigate the relationship between SST and rainfall anomalies using a complex network approach. We identify four ocean regions which exhibit the strongest overall SST correlations with central Amazon rainfall, including two particularly prominent regions in the northern and southern tropical Atlantic. Based on the time-dependent correlation between SST anomalies in these two regions alone, we establish a new early-warning method for droughts in the central Amazon basin and demonstrate its robustness in hindcasting past major drought events with lead-times up to 18 months.
Gasausströmungen, oft in der Form hoch kollimierter Jets, sind ein allgegenwärtiges Phänomen bei der Geburt neuer Sterne. Emission von stossangeregtem molekularem Wasserstoff bei Wellenlängen im nahen Infrarotbereich ist ein Merkmal ihrer Existenz und auch in eingebetteten, im Optischen obskurierten Ausströmungen generell gut zu beobachten. In dieser Arbeit werden die Resultate einer von Auswahleffekten freien, empfindlichen, grossflächigen Suche nach solchen Ausströmungen von Protosternen in der v=1-0 S(1) Linie molekularen Wasserstoffs bei einer Wellenlänge von 2.12 µm vorgestellt. Die Durchmusterung umfasst eine Fläche von etwa einem Quadratgrad in der Orion A Riesenmolekülwolke. Weitere Daten aus einem grossen Wellenlängenbereich werden benutzt, um die Quellen der Ausströmungen zu identifizieren. Das Ziel dieser Arbeit ist es, eine Stichprobe von Ausströmungen zu bekommen, die so weit wie möglich frei von Auswahleffekten ist, um die typischen Eigenschaften protostellarer Ausströmungen und deren Entwicklung festzustellen, sowie um die Rückwirkung der Ausströmungen auf die umgebende Wolke zu untersuchen. Das erste Ergebnis ist, dass Ausströmungen in Sternentstehungsgebieten tatsächlich sehr häufig sind: mehr als 70 Jet-Kandidaten werden identifiziert. Die meisten zeigen eine sehr irreguläre Morphologie anstelle regulärer oder symmetrischer Strukturen. Dies ist auf das turbulente, klumpige Medium zurückzuführen, in das sich die Jets hineinbewegen. Die Ausrichtung der Jets ist zufällig verteilt. Insbesondere gibt es keine bevorzugte Ausrichtung der Jets parallel zum grossräumigen Magnetfeld in der Wolke. Das legt nahe, dass die Rotations- und Symmetrieachse in einem protostellaren System durch zufällige, turbulente Bewegung in der Wolke bestimmt wird. Mögliche Ausströmungsquellen werden für 49 Jets identifiziert; für diese wird der Entwicklungsstand und die bolometrische Leuchtkraft abgeschätzt. Die Jetlänge und die H2 Leuchtkraft entwickeln sich gemeinsam mit der Ausströmungsquelle. Von null startend, dehnen sich die Jets schnell bis auf eine Länge von einigen Parsec aus und werden dann langsam wieder kürzer. Sie sind zuerst sehr leuchtkräftig, die H2 Helligkeit nimmt aber im Lauf der protostellaren Entwicklung ab. Die Längen- und H2 Leuchtkraftentwicklung lässt sich im Wesentlichen durch eine zuerst sehr hohe, dann niedriger werdende Massenausflussrate erklären, die auf eine zuerst sehr hohe, dann niedriger werdende Gasakkretionsrate auf den Protostern schliessen lässt (Akkretion und Ejektion sind eng verknüpft!). Die Längenabnahme der Jets erfordert eine ständig wirkende Abbremsung der Jets. Ein einfaches Modell einer simultanen Entwicklung eines Protosterns, seiner zirkumstellaren Umgebung und seiner Ausströmung (Smith 2000) kann die gemessenen H2- und bolometrischen Leuchtkräfte der Jets und ihrer Quellen reproduzieren, unter der Annahme, dass die starke Akkretionsaktivität zu Beginn der protostellaren Entwicklung mit einer überproportional hohen Massenausflussrate verbunden ist. Im Durchmusterungsgebiet sind 125 dichte Molekülwolkenkerne bekannt (Tatematsu et al. 1993). Jets (bzw. Sterne) entstehen in ruhigen Wolkenkernen, d.h. solchen mit einem niedrigen Verhältnis von interner kinetischer Energie zu gravitativer potentieller Energie; dies sind die Wolkenkerne höherer Masse. Die Wolkenkerne mit Jets haben im Mittel grössere Linienbreiten als die ohne Jets. Dies ist darauf zurückzuführen, dass sie bevorzugt in den massereicheren Wolkenkernen zu finden sind, welche generell eine grössere Linienbreite haben. Es gibt keinen Hinweis auf stärkere interne Bewegungen in Wolkenkernen mit Jets, die durch eine Wechselwirkung der Jets mit den Wolkenkernen erzeugt sein könnte. Es gibt, wie von der Theorie vorausgesagt, eine Beziehung zwischen der Linienbreite der Wolkenkerne und der H2 Leuchtkraft der Jets, wenn Jets von Klasse 0 und Klasse I Protosternen separat betrachtet werden; dabei sind Klasse 0 Jets leuchtkräftiger als Klasse I Jets, was ebenfalls auf eine zeitabhängige Akkretionsrate mit einer frühzeitigen Spitze und einem darauffolgenden Abklingen hinweist. Schliesslich wird die Rückwirkung der Jetpopulation auf eine Molekülwolke unter der Annahme strikter Vorwärtsimpulserhaltung betrachtet. Die Jets können auf der Skala einer ganzen Riesenmolekülwolke und auf den Skalen von Molekülwolkenkernen nicht genügend Impuls liefern, um die abklingende Turbulenz wieder anzuregen. Auf der mittleren Skala von molekularen Klumpen, mit einer Grösse von einigen parsec und Massen von einigen hundert Sonnenmassen liefern die Jets jedoch genügend Impuls in hinreichend kurzer Zeit, um die Turbulenz “am Leben zu erhalten” und können damit helfen, einen Klumpen gegen seinen Kollaps zu stabilisieren.
Die vorliegende Arbeit beschäftigt sich mit der Charakterisierung von Seismizität anhand von Erdbebenkatalogen. Es werden neue Verfahren der Datenanalyse entwickelt, die Aufschluss darüber geben sollen, ob der seismischen Dynamik ein stochastischer oder ein deterministischer Prozess zugrunde liegt und was daraus für die Vorhersagbarkeit starker Erdbeben folgt. Es wird gezeigt, dass seismisch aktive Regionen häufig durch nichtlinearen Determinismus gekennzeichent sind. Dies schließt zumindest die Möglichkeit einer Kurzzeitvorhersage ein. Das Auftreten seismischer Ruhe wird häufig als Vorläuferphaenomen für starke Erdbeben gedeutet. Es wird eine neue Methode präsentiert, die eine systematische raumzeitliche Kartierung seismischer Ruhephasen ermöglicht. Die statistische Signifikanz wird mit Hilfe des Konzeptes der Ersatzdaten bestimmt. Als Resultat erhält man deutliche Korrelationen zwischen seismischen Ruheperioden und starken Erdbeben. Gleichwohl ist die Signifikanz dafür nicht hoch genug, um eine Vorhersage im Sinne einer Aussage über den Ort, die Zeit und die Stärke eines zu erwartenden Hauptbebens zu ermöglichen.
In this thesis, we treat the extreme Newman-Penrose components of both the Maxwell field (s=±1) and the linearized gravitational perturbations (or "linearized gravity" for short) (s=±2) in the exterior of a slowly rotating Kerr black hole. Upon different rescalings, we can obtain spin s components which satisfy the separable Teukolsky master equation (TME). For each of these spin s components defined in Kinnersley tetrad, the resulting equations by performing some first-order differential operator on it once and twice (twice only for s=±2), together with the TME, are in the form of an "inhomogeneous spin-weighted wave equation" (ISWWE) with different potentials and constitute a linear spin-weighted wave system. We then prove energy and integrated local energy decay (Morawetz) estimates for this type of ISWWE, and utilize them to achieve both a uniform bound of a positive definite energy and a Morawetz estimate for the regular extreme Newman-Penrose components defined in the regular Hawking-Hartle tetrad.
We also present some brief discussions on mode stability for TME for the case of real frequencies. This says that in a fixed subextremal Kerr spacetime, there is no nontrivial separated mode solutions to TME which are purely ingoing at horizon and purely outgoing at infinity. This yields a representation formula for solutions to inhomogeneous Teukolsky equations, and will play a crucial role in generalizing the above energy and Morawetz estimates results to the full subextremal Kerr case.
We use ultrafast x-ray diffraction to investigate the effect of expansive phononic and contractive magnetic stress driving the picosecond strain response of a metallic perovskite SrRuO3 thin film upon femtosecond laser excitation. We exemplify how the anisotropic bulk equilibrium thermal expansion can be used to predict the response of the thin film to ultrafast deposition of energy. It is key to consider that the laterally homogeneous laser excitation changes the strain response compared to the near-equilibrium thermal expansion because the balanced in-plane stresses suppress the Poisson stress on the picosecond timescale. We find a very large negative Grüneisen constant describing the large contractive stress imposed by a small amount of energy in the spin system. The temperature and fluence dependence of the strain response for a double-pulse excitation scheme demonstrates the saturation of the magnetic stress in the high-fluence regime.
We study populations of globally coupled noisy rotators (oscillators with inertia) allowing a nonequilibrium transition from a desynchronized state to a synchronous one (with the nonvanishing order parameter). The newly developed analytical approaches resulted in solutions describing the synchronous state with constant order parameter for weakly inertial rotators, including the case of zero inertia, when the model is reduced to the Kuramoto model of coupled noise oscillators. These approaches provide also analytical criteria distinguishing supercritical and subcritical transitions to the desynchronized state and indicate the universality of such transitions in rotator ensembles. All the obtained analytical results are confirmed by the numerical ones, both by direct simulations of the large ensembles and by solution of the associated Fokker-Planck equation. We also propose generalizations of the developed approaches for setups where different rotators parameters (natural frequencies, masses, noise intensities, strengths and phase shifts in coupling) are dispersed.
We investigate the ensemble and time averaged mean squared displacements for particle diffusion in a simple model for disordered media by assuming that the local diffusivity is both fluctuating in time and has a deterministic average growth or decay in time. In this study we compare computer simulations of the stochastic Langevin equation for this random diffusion process with analytical results. We explore the regimes of normal Brownian motion as well as anomalous diffusion in the sub- and superdiffusive regimes. We also consider effects of the inertial term on the particle motion. The investigation of the resulting diffusion is performed for unconfined and confined motion.
The mobile-immobile model (MIM) has been established in geoscience in the context of contaminant transport in groundwater. Here the tracer particles effectively immobilise, e.g., due to diffusion into dead-end pores or sorption. The main idea of the MIM is to split the total particle density into a mobile and an immobile density. Individual tracers switch between the mobile and immobile state following a two-state telegraph process, i.e., the residence times in each state are distributed exponentially. In geoscience the focus lies on the breakthrough curve (BTC), which is the concentration at a fixed location over time. We apply the MIM to biological experiments with a special focus on anomalous scaling regimes of the mean squared displacement (MSD) and non-Gaussian displacement distributions. As an exemplary system, we have analysed the motion of tau proteins, that diffuse freely inside axons of neurons. Their free diffusion thereby corresponds to the mobile state of the MIM. Tau proteins stochastically bind to microtubules, which effectively immobilises the tau proteins until they unbind and continue diffusing. Long immobilisation durations compared to the mobile durations give rise to distinct non-Gaussian Laplace shaped distributions. It is accompanied by a plateau in the MSD for initially mobile tracer particles at relevant intermediate timescales. An equilibrium fraction of initially mobile tracers gives rise to non-Gaussian displacements at intermediate timescales, while the MSD remains linear at all times. In another setting bio molecules diffuse in a biosensor and transiently bind to specific receptors, where advection becomes relevant in the mobile state. The plateau in the MSD observed for the advection-free setting and long immobilisation durations persists also for the case with advection. We find a new clear regime of anomalous diffusion with non-Gaussian distributions and a cubic scaling of the MSD. This regime emerges for initially mobile and for initially immobile tracers. For an equilibrium fraction of initially mobile tracers we observe an intermittent ballistic scaling of the MSD. The long-time effective diffusion coefficient is enhanced by advection, which we physically explain with the variance of mobile durations. Finally, we generalize the MIM to incorporate arbitrary immobilisation time distributions and focus on a Mittag-Leffler immobilisation time distribution with power-law tail ~ t^(-1-mu) with 0<mu<1 and diverging mean immobilisation durations. A fit of our model to the BTC of experimental data from tracer particles in aquifers matches the BTC including the power-law tail. We use the fit parameters for plotting the displacement distributions and the MSD. We find Gaussian normal diffusion at short times and long-time power-law decay of mobile mass accompanied by anomalous diffusion at long times. The long-time diffusion is subdiffusive in the advection-free setting, while it is either subdiffusive for 0<mu<1/2 or superdiffusive for 1/2<mu<1 when advection is present. In the long-time limit we show equivalence of our model to a bi-fractional diffusion equation.
Die Untersuchung mikrogelinster astronomischer Objekte ermöglicht es, Informationen über die Größe und Struktur dieser Objekte zu erhalten. Im ersten Teil dieser Arbeit werden die Spektren von drei gelinsten Quasare, die mit dem Potsdamer Multi Aperture Spectrophotometer (PMAS) erhalten wurden, auf Anzeichen für Mikrolensing untersucht. In den Spektren des Vierfachquasares HE 0435-1223 und des Doppelquasares HE 0047-1756 konnten Hinweise für Mikrolensing gefunden werden, während der Doppelquasar UM 673 (Q 0142--100) keine Anzeichen für Mikrolensing zeigt. Die Invertierung der Lichtkurve eines Mikrolensing-Kausik-Crossing-Ereignisses ermöglicht es, das eindimensionale Helligkeitsprofil der gelinsten Quelle zu rekonstruieren. Dies wird im zweiten Teil dieser Arbeit untersucht. Die mathematische Beschreibung dieser Aufgabe führt zu einer Volterra'schen Integralgleichung der ersten Art, deren Lösung ein schlecht gestelltes Problem ist. Zu ihrer Lösung wird in dieser Arbeit ein lokales Regularisierungsverfahren angewendet, das an die kausale Strukture der Volterra'schen Gleichung besser angepasst ist als die bisher verwendete Tikhonov-Phillips-Regularisierung. Es zeigt sich, dass mit dieser Methode eine bessere Rekonstruktion kleinerer Strukturen in der Quelle möglich ist. Weiterhin wird die Anwendbarkeit der Regularisierungsmethode auf realistische Lichtkurven mit irregulärem Sampling bzw. größeren Lücken in den Datenpunkten untersucht.
This Thesis was devoted to the study of the coupled system composed by El Niño/Southern Oscillation and the Annual Cycle. More precisely, the work was focused on two main problems: 1. How to separate both oscillations into an affordable model for understanding the behaviour of the whole system. 2. How to model the system in order to achieve a better understanding of the interaction, as well as to predict future states of the system. We focused our efforts in the Sea Surface Temperature equations, considering that atmospheric effects were secondary to the ocean dynamics. The results found may be summarised as follows: 1. Linear methods are not suitable for characterising the dimensionality of the sea surface temperature in the tropical Pacific Ocean. Therefore they do not help to separate the oscillations by themselves. Instead, nonlinear methods of dimensionality reduction are proven to be better in defining a lower limit for the dimensionality of the system as well as in explaining the statistical results in a more physical way [1]. In particular, Isomap, a nonlinear modification of Multidimensional Scaling methods, provides a physically appealing method of decomposing the data, as it substitutes the euclidean distances in the manifold by an approximation of the geodesic distances. We expect that this method could be successfully applied to other oscillatory extended systems and, in particular, to meteorological systems. 2. A three dimensional dynamical system could be modeled, using a backfitting algorithm, for describing the dynamics of the sea surface temperature in the tropical Pacific Ocean. We observed that, although there were few data points available, we could predict future behaviours of the coupled ENSO-Annual Cycle system with an accuracy of less than six months, although the constructed system presented several drawbacks: few data points to input in the backfitting algorithm, untrained model, lack of forcing with external data and simplification using a close system. Anyway, ensemble prediction techniques showed that the prediction skills of the three dimensional time series were as good as those found in much more complex models. This suggests that the climatological system in the tropics is mainly explained by ocean dynamics, while the atmosphere plays a secondary role in the physics of the process. Relevant predictions for short lead times can be made using a low dimensional system, despite its simplicity. The analysis of the SST data suggests that nonlinear interaction between the oscillations is small, and that noise plays a secondary role in the fundamental dynamics of the oscillations [2]. A global view of the work shows a general procedure to face modeling of climatological systems. First, we should find a suitable method of either linear or nonlinear dimensionality reduction. Then, low dimensional time series could be extracted out of the method applied. Finally, a low dimensional model could be found using a backfitting algorithm in order to predict future states of the system.
Subject of this work is the study of applications of the Galactic Microlensing effect, where the light of a distant star (source) is bend according to Einstein's theory of gravity by the gravitational field of intervening compact mass objects (lenses), creating multiple (however not resolvable) images of the source. Relative motion of source, observer and lens leads to a variation of deflection/magnification and thus to a time dependant observable brightness change (lightcurve), a so-called microlensing event, lasting weeks to months. The focus lies on the modeling of binary-lens events, which provide a unique tool to fully characterize the lens-source system and to detect extra-solar planets around the lens star. Making use of the ability of genetic algorithms to efficiently explore large and intricate parameter spaces in the quest for the global best solution, a modeling software (Tango) for binary lenses is developed, presented and applied to data sets from the PLANET microlensing campaign. For the event OGLE-2002-BLG-069 the 2nd ever lens mass measurement has been achieved, leading to a scenario, where a G5III Bulge giant at 9.4 kpc is lensed by an M-dwarf binary with total mass of M=0.51 solar masses at distance 2.9 kpc. Furthermore a method is presented to use the absence of planetary lightcurve signatures to constrain the abundance of extra-solar planets.
Proteine sind an praktisch allen Prozessen in lebenden Zellen maßgeblich beteiligt. Auch in der Biotechnologie werden Proteine in vielfältiger Weise eingesetzt.
Ein Protein besteht aus einer Kette von Aminosäuren. Häufig lagern sich mehrere dieser Ketten zu größeren Strukturen und Funktionseinheiten, sogenannten Proteinkomplexen,
zusammen. Kürzlich wurde gezeigt, dass eine Proteinkomplexbildung bereits während der Biosynthese der Proteine (co-translational) stattfinden kann
und nicht stets erst danach (post-translational) erfolgt. Da Fehlassemblierungen von Proteinen zu Funktionsverlusten und adversen Effekten führen, ist eine präzise und verlässliche Proteinkomplexbildung sowohl für zelluläre Prozesse als auch für biotechnologische Anwendungen essenziell. Mit experimentellen Methoden lassen sich zwar u.a. die Stöchiometrie und die Struktur von Proteinkomplexen bestimmen,
jedoch bisher nicht die Dynamik der Komplexbildung auf unterschiedlichen Zeitskalen. Daher sind grundlegende Mechanismen der Proteinkomplexbildung noch nicht vollständig verstanden. Die hier vorgestellte, auf experimentellen Erkenntnissen aufbauende, computergestützte Modellierung der Proteinkomplexbildung erlaubt eine umfassende Analyse des Einflusses physikalisch-chemischer Parameter
auf den Assemblierungsprozess. Die Modelle bilden möglichst realistisch die experimentellen Systeme der Kooperationspartner (Bar-Ziv, Weizmann-Institut, Israel; Bukau und Kramer, Universität Heidelberg) ab, um damit die Assemblierung von Proteinkomplexen einerseits in einem quasi-zweidimensionalen synthetischen Expressionssystem (in vitro) und andererseits im Bakterium Escherichia coli (in vivo) untersuchen zu können. Mit Hilfe eines vereinfachten Expressionssystems, in dem die Proteine nur an die Chip-Oberfläche, aber nicht aneinander binden können, wird das theoretische Modell parametrisiert. In diesem vereinfachten in-vitro-System durchläuft die Effizienz der Komplexbildung drei Regime – ein bindedominiertes Regime, ein Mischregime und ein produktionsdominiertes Regime. Ihr Maximum erreicht die Effizienz dabei kurz nach dem Übergang vom bindedominierten ins Mischregime und fällt anschließend monoton ab. Sowohl im nicht-vereinfachten in-vitro- als auch im in-vivo-System koexistieren je zwei konkurrierende Assemblierungspfade: Im in-vitro-System erfolgt die Komplexbildung entweder spontan in wässriger Lösung (Lösungsassemblierung) oder aber in einer definierten Schrittfolge an der Chip-Oberfläche (Oberflächenassemblierung); Im in-vivo-System konkurrieren hingegen die co- und die post-translationale Komplexbildung. Es zeigt sich, dass die Dominanz der Assemblierungspfade im in-vitro-System zeitabhängig ist und u.a. durch die Limitierung und Stärke der Bindestellen auf der Chip-Oberfläche beeinflusst werden kann. Im in-vivo-System hat der räumliche Abstand zwischen den Syntheseorten der beiden Proteinkomponenten nur dann einen Einfluss auf die Komplexbildung, wenn die Untereinheiten schnell degradieren. In diesem Fall dominiert die co-translationale Assemblierung auch auf kurzen Zeitskalen deutlich, wohingegen es bei stabilen Untereinheiten zu einem Wechsel von der Dominanz der post- hin zu einer geringen Dominanz der co-translationalen Assemblierung kommt. Mit den in-silico-Modellen lässt sich neben der Dynamik u.a. auch die Lokalisierung der Komplexbildung und -bindung darstellen, was einen Vergleich der theoretischen Vorhersagen mit experimentellen Daten und somit eine Validierung der Modelle ermöglicht. Der hier präsentierte in-silico Ansatz ergänzt die experimentellen Methoden, und erlaubt so, deren Ergebnisse zu interpretieren und neue Erkenntnisse davon abzuleiten.
Corvino, Corvino and Schoen, Chruściel and Delay have shown the existence of a large class of asymptotically flat vacuum initial data for Einstein's field equations which are static or stationary in a neighborhood of space-like infinity, yet quite general in the interior. The proof relies on some abstract, non-constructive arguments which makes it difficult to calculate such data numerically by using similar arguments. A quasilinear elliptic system of equations is presented of which we expect that it can be used to construct vacuum initial data which are asymptotically flat, time-reflection symmetric, and asymptotic to static data up to a prescribed order at space-like infinity. A perturbation argument is used to show the existence of solutions. It is valid when the order at which the solutions approach staticity is restricted to a certain range. Difficulties appear when trying to improve this result to show the existence of solutions that are asymptotically static at higher order. The problems arise from the lack of surjectivity of a certain operator. Some tensor decompositions in asymptotically flat manifolds exhibit some of the difficulties encountered above. The Helmholtz decomposition, which plays a role in the preparation of initial data for the Maxwell equations, is discussed as a model problem. A method to circumvent the difficulties that arise when fast decay rates are required is discussed. This is done in a way that opens the possibility to perform numerical computations. The insights from the analysis of the Helmholtz decomposition are applied to the York decomposition, which is related to that part of the quasilinear system which gives rise to the difficulties. For this decomposition analogous results are obtained. It turns out, however, that in this case the presence of symmetries of the underlying metric leads to certain complications. The question, whether the results obtained so far can be used again to show by a perturbation argument the existence of vacuum initial data which approach static solutions at infinity at any given order, thus remains open. The answer requires further analysis and perhaps new methods.
Atmospheric circulation and the surface mass balance in a regional climate model of Antarctica
(2007)
Understanding the Earth's climate system and particularly climate variability presents one of the most difficult and urgent challenges in science. The Antarctic plays a crucial role in the global climate system, since it is the principal region of radiative energy deficit and atmospheric cooling. An assessment of regional climate model HIRHAM is presented. The simulations are generated with the HIRHAM model, which is modified for Antarctic applications. With a horizontal resolution of 55km, the model has been run for the period 1958-1998 creating long-term simulations from initial and boundary conditions provided by the European Centre for Medium-Range Weather Forecasts (ECMWF) ERA40 re-analysis. The model output is compared with observations from observation stations, upper air data, global atmospheric analyses and satellite data. In comparison with the observations, the evaluation shows that the simulations with the HIRHAM model capture both the large and regional scale circulation features with generally small bias in the modeled variables. On the annual time scale the largest errors in the model simulations are the overestimation total cloud cover and the colder near-surface temperature over the interior of the Antarctic plateau. The low-level temperature inversion as well as low-level wind jet is well captured by the model. The decadal scale processes were studied based on trend calculations. The long-term run was divided into two 20 years parts. The 2m temperature, 500 hPa temperature, MSLP, precipitation and net mass balance trends were calculated for both periods and over 1958 - 1998. During the last two decades the strong surface cooling was observed over the Eastern Antarctica, this result is in good agreement with the result of Chapman and Walsh (2005) who calculated the temperature trend based on the observational data. The MSLP trend reveals a big disparity between the first and second parts of the 40 year run. The overall trend shows the strengthening of the circumpolar vortex and continental anticyclone. The net mass balance as well as precipitation show a positive trend over the Antarctic Peninsula region, along Wilkes Land and in Dronning Maud Land. The Antarctic ice sheet grows over the Eastern part of Antarctica with small exceptions in Dronning Maud Land and Wilkes Land and sinks in the Antarctic Peninsula; this result is in good agreement with the satellite-measured altitude presented in Davis (2005) . To better understand the horizontal structure of MSLP, temperature and net mass balance trends the influence of the Southern Annual Mode (SAM) on the Antarctic climate was investigated. The main meteorological parameters during the positive and negative Antarctic Oscillation (AAO) phases were compared to each other. A positive/negative AAO index means strengthening/weakening of the circumpolar vortex, poleward/northward storm tracks and prevailing/weakening westerly winds. For detailed investigation of global teleconnection, two positive and one negative periods of AAO phase were chosen. The differences in MSLP and 2m temperature between positive and negative AAO years during the winter months partly explain the surface cooling during the last decades.
We present a semiclassical perturbation method for the description of atomic diffraction by a weakly modulated potential. It proceeds in a way similar to the treatment of light diffraction by a thin phase grating, and consists in calculating the atomic wavefunction by means of action integrals along the classical trajectories of the atoms in the absence of the modulated part of the potential. The capabilities and the validity condition of the method are illustrated on the well-known case of atomic diffraction by a Gaussian standing wave. We prove that in this situation the perturbation method is equivalent to the Raman-Nath approximation, and we point out that the usually-considered Raman-Nath validity condition can lead to inaccuracies in the evaluation of the phases of the diffraction amplitudes. The method is also applied to the case of an evanescent wave reflection grating, and an analytical expression for the diffraction pattern at any incidence angle is obtained for the first time. Finally, the application of the method to other situations is briefly discussed.
We introduce azobenzene-functionalized polyelectrolyte multilayers as efficient, inexpensive optoacoustic transducers for hyper-sound strain waves in the GHz range. By picosecond transient reflectivity measurements we study the creation of nanoscale strain waves, their reflection from interfaces, damping by scattering from nanoparticles and propagation in soft and hard adjacent materials like polymer layers, quartz and mica. The amplitude of the generated strain ε ∼ 5 × 10−4 is calibrated by ultrafast X-ray diffraction.
In the presence of a solid-liquid or liquid-air interface, bacteria can choose between a planktonic and a sessile lifestyle. Depending on environmental conditions, cells swimming in close proximity to the interface can irreversibly attach to the surface and grow into three-dimensional aggregates where the majority of cells is sessile and embedded in an extracellular polymer matrix (biofilm). We used microfluidic tools and time lapse microscopy to perform experiments with the polarly flagellated soil bacterium Pseudomonas putida (P. putida), a bacterial species that is able to form biofilms. We analyzed individual trajectories of swimming cells, both in the bulk fluid and in close proximity to a glass-liquid interface. Additionally, surface related growth during the early phase of biofilm formation was investigated. In the bulk fluid, P.putida shows a typical bacterial swimming pattern of alternating periods of persistent displacement along a line (runs) and fast reorientation events (turns) and cells swim with an average speed around 24 micrometer per second. We found that the distribution of turning angles is bimodal with a dominating peak around 180 degrees. In approximately six out of ten turning events, the cell reverses its swimming direction. In addition, our analysis revealed that upon a reversal, the cell systematically changes its swimming speed by a factor of two on average. Based on the experimentally observed values of mean runtime and rotational diffusion, we presented a model to describe the spreading of a population of cells by a run-reverse random walker with alternating speeds. We successfully recover the mean square displacement and, by an extended version of the model, also the negative dip in the directional autocorrelation function as observed in the experiments. The analytical solution of the model demonstrates that alternating speeds enhance a cells ability to explore its environment as compared to a bacterium moving at a constant intermediate speed. As compared to the bulk fluid, for cells swimming near a solid boundary we observed an increase in swimming speed at distances below d= 5 micrometer and an increase in average angular velocity at distances below d= 4 micrometer. While the average speed was maximal with an increase around 15% at a distance of d= 3 micrometer, the angular velocity was highest in closest proximity to the boundary at d=1 micrometer with an increase around 90% as compared to the bulk fluid. To investigate the swimming behavior in a confinement between two solid boundaries, we developed an experimental setup to acquire three-dimensional trajectories using a piezo driven objective mount coupled to a high speed camera. Results on speed and angular velocity were consistent with motility statistics in the presence of a single boundary. Additionally, an analysis of the probability density revealed that a majority of cells accumulated near the upper and lower boundaries of the microchannel. The increase in angular velocity is consistent with previous studies, where bacteria near a solid boundary were shown to swim on circular trajectories, an effect which can be attributed to a wall induced torque. The increase in speed at a distance of several times the size of the cell body, however, cannot be explained by existing theories which either consider the drag increase on cell body and flagellum near a boundary (resistive force theory) or model the swimming microorganism by a multipole expansion to account for the flow field interaction between cell and boundary. An accumulation of swimming bacteria near solid boundaries has been observed in similar experiments. Our results confirm that collisions with the surface play an important role and hydrodynamic interactions alone cannot explain the steady-state accumulation of cells near the channel walls. Furthermore, we monitored the number growth of cells in the microchannel under medium rich conditions. We observed that, after a lag time, initially isolated cells at the surface started to grow by division into colonies of increasing size, while coexisting with a comparable smaller number of swimming cells. After 5:50 hours, we observed a sudden jump in the number of swimming cells, which was accompanied by a breakup of bigger clusters on the surface. After approximately 30 minutes where planktonic cells dominated in the microchannel, individual swimming cells reattached to the surface. We interpret this process as an emigration and recolonization event. A number of complementary experiments were performed to investigate the influence of collective effects or a depletion of the growth medium on the transition. Similar to earlier observations on another bacterium from the same family we found that the release of cells to the swimming phase is most likely the result of an individual adaption process, where syntheses of proteins for flagellar motility are upregulated after a number of division cycles at the surface.
Sprache
Englisch
Modern single-particle-tracking techniques produce extensive time-series of diffusive motion in a wide variety of systems, from single-molecule motion in living-cells to movement ecology. The quest is to decipher the physical mechanisms encoded in the data and thus to better understand the probed systems. We here augment recently proposed machine-learning techniques for decoding anomalous-diffusion data to include an uncertainty estimate in addition to the predicted output. To avoid the Black-Box-Problem a Bayesian-Deep-Learning technique named Stochastic-Weight-Averaging-Gaussian is used to train models for both the classification of the diffusionmodel and the regression of the anomalous diffusion exponent of single-particle-trajectories. Evaluating their performance, we find that these models can achieve a wellcalibrated error estimate while maintaining high prediction accuracies. In the analysis of the output uncertainty predictions we relate these to properties of the underlying diffusion models, thus providing insights into the learning process of the machine and the relevance of the output.
Estimation of the self-similarity exponent has attracted growing interest in recent decades and became a research subject in various fields and disciplines. Real-world data exhibiting self-similar behavior and/or parametrized by self-similarity exponent (in particular Hurst exponent) have been collected in different fields ranging from finance and human sciencies to hydrologic and traffic networks. Such rich classes of possible applications obligates researchers to investigate qualitatively new methods for estimation of the self-similarity exponent as well as identification of long-range dependencies (or long memory). In this thesis I present the Bayesian estimation of the Hurst exponent. In contrast to previous methods, the Bayesian approach allows the possibility to calculate the point estimator and confidence intervals at the same time, bringing significant advantages in data-analysis as discussed in this thesis. Moreover, it is also applicable to short data and unevenly sampled data, thus broadening the range of systems where the estimation of the Hurst exponent is possible. Taking into account that one of the substantial classes of great interest in modeling is the class of Gaussian self-similar processes, this thesis considers the realizations of the processes of fractional Brownian motion and fractional Gaussian noise. Additionally, applications to real-world data, such as the data of water level of the Nile River and fixational eye movements are also discussed.
Microswimmers, i.e. swimmers of micron size experiencing low Reynolds numbers, have received a great deal of attention in the last years, since many applications are envisioned in medicine and bioremediation. A promising field is the one of magnetic swimmers, since magnetism is biocom-patible and could be used to direct or actuate the swimmers. This thesis studies two examples of magnetic microswimmers from a physics point of view.
The first system to be studied are magnetic cells, which can be magnetic biohybrids (a swimming cell coupled with a magnetic synthetic component) or magnetotactic bacteria (naturally occurring bacteria that produce an intracellular chain of magnetic crystals). A magnetic cell can passively interact with external magnetic fields, which can be used for direction. The aim of the thesis is to understand how magnetic cells couple this magnetic interaction to their swimming strategies, mainly how they combine it with chemotaxis (the ability to sense external gradient of chemical species and to bias their walk on these gradients). In particular, one open question addresses the advantage given by these magnetic interactions for the magnetotactic bacteria in a natural environment, such as porous sediments. In the thesis, a modified Active Brownian Particle model is used to perform simulations and to reproduce experimental data for different systems such as bacteria swimming in the bulk, in a capillary or in confined geometries. I will show that magnetic fields speed up chemotaxis under special conditions, depending on parameters such as their swimming strategy (run-and-tumble or run-and-reverse), aerotactic strategy (axial or polar), and magnetic fields (intensities and orientations), but it can also hinder bacterial chemotaxis depending on the system.
The second example of magnetic microswimmer are rigid magnetic propellers such as helices or random-shaped propellers. These propellers are actuated and directed by an external rotating magnetic field. One open question is how shape and magnetic properties influence the propeller behavior; the goal of this research field is to design the best propeller for a given situation. The aim of the thesis is to propose a simulation method to reproduce the behavior of experimentally-realized propellers and to determine their magnetic properties. The hydrodynamic simulations are based on the use of the mobility matrix. As main result, I propose a method to match the experimental data, while showing that not only shape but also the magnetic properties influence the propellers swimming characteristics.
Bestimmung von Ozonabbauraten über der Arktis und Antarktis mittels Ozonsonden- und Satellitendaten
(2005)
Diese Arbeit beschäftigt sich mit der chemischen Ozonzerstörung im arktischen und antarktischen stratosphärischen Polarwirbel. Diese wird durch Abbauprodukte von anthropogen emittierten Fluorchlorkohlenwasserstoffen und Halonen, Chlor- und Bromradikale, verursacht. Studien in denen der gemessene und modellierte Ozonabbau verglichen wird zeigen, dass die Prozeße bekannt sind, der quantitative Verlauf allerdings nicht vollständig verstanden ist. Die Prozesse, die zur Ozonzerstörung führen sind in beiden Polarwirbeln ähnlich. Allerdings fällt als Konsequenz unterschiedlicher meteorologischer Bedingungen der chemische Ozonabbau im arktischen Polarwirbel weniger drastisch aus als über der Antarktis. Der arktische Polarwirbel ist im Mittel stärker dynamisch gestört als der antarktische und weist eine stärkere Jahr-zu-Jahr Variabilität auf. Das erschwert die Messung des chemischen Ozonabbaus. Zur Trennung des chemischen Ozonabbaus von der dynamischen Umverteilung des Ozons im arktischen Polarwirbel wurde die Matchmethode entwickelt. Bei dieser Methode werden Luftpakete innerhalb des Polarwirbels mehrfach beprobt, um den chemischen Anteil der Ozonänderung zu quantifizieren. Zur Identifizierung von doppelt beprobten Luftpaketen werden Trajektorien aus Windfeldern berechnet. Können zwei Messungen im Rahmen bestimmter Qualitätskriterien durch eine Trajektorie verbunden werden, kann die Ozondifferenz zwischen beiden Sondierungen berechnet und als chemischer Ozonabbau interpretiert werden. Eine solche Koinzidenz wird Match genannt. Der Matchmethode liegt ein statistischer Ansatz zugrunde, so dass eine Vielzahl solcher doppelt beprobter Luftmassen vorliegen muss, um gesicherte Aussagen über die Ozonzerstörung gewinnen zu können. So erhält man die Ozonzerstörung in einem bestimmten Zeitintervall, also Ozonabbauraten. Um die Anzahl an doppelt beprobten Luftpackten zu erhöhen wurde eine aktive Koordinierung der Ozonsondenaufstiege entwickelt. Im Rahmen dieser Arbeit wurden Matchkampagnen während des arktischen Winters 2002/2003 und zum ersten Mal während eines antarktischen Winter (2003) durchgeführt. Aus den gewonnenen Daten wurden Ozonabbauraten in beiden Polarwirbeln bestimmt. Diese Abbauraten dienen zum einen der Evaluierung von Modellen, ermöglichen aber auch den direkten Vergleich von Ozonabbauraten in beiden Polarwirbeln. Der Winter 2002/2003 war zu Beginn durch sehr tiefe Temperaturen in der mittleren und unteren Stratosphäre charakterisiert, so dass die Matchkampagne Ende November gestartet wurde. Ab Januar war der Polarwirbel zeitweise stark dynamisch gestört. Die Kampagne ging bis Mitte März. Für den Höhenbereich von 400 bis 550 K potentieller Temperatur (15-23 km) konnten Ozonabbauraten und der Verlust in der Gesamtsäule berechnet werden. Die Ozonabbauraten wurden in verschiedenen Tests auf ihre Stabilität überprüft. Der antarktische Polarwirbel war vom Beginn des Winters bis Mitte Oktober 2003 sehr kalt und stellte Ende September kurzzeitig den Rekord für die größte bisher aufgetretene Ozonloch-Fläche ein. Es konnten für den Kampagnenzeitraum, Anfang Juni bis Anfang Oktober, Ozonabbauraten im Höhenbereich von 400 bis 550 K potentieller Temperatur ermittelt werden. Der zeitliche Verlauf des Ozonabbaus war dabei auf fast allen Höhenniveaus identisch. Die Zunahme des Sonnenlichtes im Polarwirbel mit der Zeit führt zu einem starken Anwachsen der Ozonabbauraten. Ab Mitte September gingen die Ozonabbauraten auf Null zurück, da bis zu diesem Zeitpunkt das gesamte Ozon zwischen ca. 14 und 21 km zerstört wurde. Im letzten Teil der Arbeit wird ein neuer Algorithmus auf Basis der multivariaten Regression vorgestellt, mit dem Ozonabbauraten aus Ozonprofilen verschiedener Sensoren gleichzeitig berechnet werden können. Dabei können neben der Ozonabbaurate die systematischen Fehler zwischen den einzelnen Sensoren bestimmt werden. Dies wurde exemplarisch am antarktischen Winter 2003 für das 475 K potentielle Temperatur Niveau gezeigt. Neben den Ozonprofilen der Sonden wurden Daten von zwei Satellitenexperimenten verwendet. Die mit der multivariaten Matchtechnik berechneten Ozonabbauraten stimmen gut mit den Ozonabbauraten der Einzelsensor-Matchansätze überein.
In biological cells, the long-range intracellular traffic is powered by molecular motors which transport various cargos along microtubule filaments. The microtubules possess an intrinsic direction, having a 'plus' and a 'minus' end. Some molecular motors such as cytoplasmic dynein walk to the minus end, while others such as conventional kinesin walk to the plus end. Cells typically have an isopolar microtubule network. This is most pronounced in neuronal axons or fungal hyphae. In these long and thin tubular protrusions, the microtubules are arranged parallel to the tube axis with the minus ends pointing to the cell body and the plus ends pointing to the tip. In such a tubular compartment, transport by only one motor type leads to 'motor traffic jams'. Kinesin-driven cargos accumulate at the tip, while dynein-driven cargos accumulate near the cell body. We identify the relevant length scales and characterize the jamming behaviour in these tube geometries by using both Monte Carlo simulations and analytical calculations. A possible solution to this jamming problem is to transport cargos with a team of plus and a team of minus motors simultaneously, so that they can travel bidirectionally, as observed in cells. The presumably simplest mechanism for such bidirectional transport is provided by a 'tug-of-war' between the two motor teams which is governed by mechanical motor interactions only. We develop a stochastic tug-of-war model and study it with numerical and analytical calculations. We find a surprisingly complex cooperative motility behaviour. We compare our results to the available experimental data, which we reproduce qualitatively and quantitatively.
A numerical bifurcation analysis of the electrically driven plane sheet pinch is presented. The electrical conductivity varies across the sheet such as to allow instability of the quiescent basic state at some critical Hartmann number. The most unstable perturbation is the two-dimensional tearing mode. Restricting the whole problem to two spatial dimensions, this mode is followed up to a time-asymptotic steady state, which proves to be sensitive to three-dimensional perturbations even close to the point where the primary instability sets in. A comprehensive three-dimensional stability analysis of the two-dimensional steady tearing-mode state is performed by varying parameters of the sheet pinch. The instability with respect to three-dimensional perturbations is suppressed by a sufficiently strong magnetic field in the invariant direction of the equilibrium. For a special choice of the system parameters, the unstably perturbed state is followed up in its nonlinear evolution and is found to approach a three-dimensional steady state.
We report on bifurcation studies for the incompressible magnetohydrodynamic equations in three space dimensions with periodic boundary conditions and a temporally constant external forcing. Fourier reprsentations of velocity, pressure and magnetic field have been used to transform the original partial differential equations into systems of ordinary differential equations (ODE), to which then special numerical methods for the qualitative analysis of systems of ODE have been applied, supplemented by the simulative calculation of solutions for selected initial conditions. In a part of the calculations, in order to reduce the number of modes to be retained, the concept of approximate inertial manifolds has been applied. For varying (incereasing from zero) strength of the imposed forcing, or varying Reynolds number, respectively, time-asymptotic states, notably stable stationary solutions, have been traced. A primary non-magnetic steady state loses, in a Hopf bifurcation, stability to a periodic state with a non-vanishing magnetic field, showing the appearance of a generic dynamo effect. From now on the magnetic field is present for all values of the forcing. The Hopf bifurcation is followed by furhter, symmetry-breaking, bifurcations, leading finally to chaos. We pay particular attention to kinetic and magnetic helicities. The dynamo effect is observed only if the forcing is chosen such that a mean kinetic helicity is generated; otherwise the magnetic field diffuses away, and the time-asymptotic states are non-magnetic, in accordance with traditional kinematic dynamo theory.
Three-dimensional bouyancy-driven convection in a horizontal fluid layer with stress-free boundary conditions at the top and bottom and periodic boundary conditions in the horizontal directions is investigated by means of numerical simulation and bifurcation-analysis techniques. The aspect ratio is fixed to a value of 2√2 and the Prandtl number to a value of 6.8. Two-dimensional convection rolls are found to be stable up to a Rayleigh number of 17 950, where a Hopf bifurcation leads to traveling waves. These are stable up to a Rayleigh number of 30 000, where a secondary Hopf bifurcation generates modulated traveling waves. We pay particular attention to the symmetries of the solutions and symmetry breaking by the bifurcations.
We have studied the bifurcation structure of the incompressible two-dimensional Navier-Stokes equations with a special external forcing driving an array of 8×8 counterrotating vortices. The study has been motivated by recent experiments with thin layers of electrolytes showing, among other things, the formation of large-scale spatial patterns. As the strength of the forcing or the Reynolds number is raised the original stationary vortex array becomes unstable and a complex sequence of bifurcations is observed. The bifurcations lead to several periodic branches, torus and chaotic solutions, and other stationary solutions. Most remarkable is the appearance of solutions characterized by structures on spatial scales large compared to the scale of the forcing. We also characterize the different dynamic regimes by means of tracers injected into the fluid. Stretching rates and Hausdorff dimensions of convected line elements are calculated to quantify the mixing process. It turns out that for time-periodic velocity fields the mixing can be very effective.
We report on bifurcation studies for the incompressible Navier-Stokes equations in two space dimensions with periodic boundary conditions and an external forcing of the Kolmogorov type. Fourier representations of velocity and pressure have been used to approximate the original partial differential equations by a finite-dimensional system of ordinary differential equations, which then has been studied by means of bifurcation-analysis techniques. A special route into chaos observed for increasing Reynolds number or strength of the imposed forcing is described. It includes several steady states, traveling waves, modulated traveling waves, periodic and torus solutions, as well as a period-doubling cascade for a torus solution. Lyapunov exponents and Kaplan-Yorke dimensions have been calculated to characterize the chaotic branch. While studying the dynamics of the system in Fourier space, we also have transformed solutions to real space and examined the relation between the different bifurcations in Fourier space and toplogical changes of the streamline portrait. In particular, the time-dependent solutions, such as, e.g., traveling waves, torus, and chaotic solutions, have been characterized by the associated fluid-particle motion (Lagrangian dynamics).
Box-Simulationen von rotierender Magnetokonvektion im flüssigen Erdkern Numerische Simulationen der 3D-MHD Gleichungen sind mit Hilfe des Codes NIRVANA durchgeführt worden. Die Gleichungen für kompressible rotierende Magnetokonvektion wurden für erdähnliche Bedingungen numerisch in einer kartesischen Box gelöst. Charakteristische Eigenschaften mittlerer Größen, wie der Turbulenz-Intensität oder der turbulente Wärmefluss, die durch die kombinierte Wirkung kleinskaliger Fluktuationen entstehen, wurden bestimmt. Die Korrelationslänge der Turbulenz hängt signifikant von der Stärke und der Orientierung des Magnetfeldes ab, und das anisotrope Verhalten der Turbulenz aufgrund von Coriolis- und Lorentzkraft ist für schnellere Rotation wesentlich stärker ausgeprägt. Die Ausbildung eines isotropen Verhaltens auf kleinen Skalen unter dem Einfluss von Rotation alleine wird bereits durch ein schwaches Magnetfeld verhindert. Dies resultiert in einer turbulenten Strömung, die durch die vertikale Komponente dominiert wird. In Gegenwart eines horizontalen Magnetfeldes nimmt der vertikale turbulente Wärmefluss leicht mit zunehmender Feldstärke zu, so dass die Kühlung eines rotierenden Systems verbessert wird. Der horizontale Wärmetransport ist stets westwärts und in Richtung der Pole orientiert. Letzteres kann unter Umständen die Quelle für eine großskalige meridionale Strömung darstellen, während erstes in globalen Simulationen mit nicht axialsymmetrischen Randbedingungen für den Wärmefluss von Bedeutung ist. Die mittlere elektromotorische Kraft, die die Erzeugung von magnetischem Fluss durch die Turbulenz beschreibt, wurde unmittelbar aus den Lösungen für Geschwindigkeit und Magnetfeld berechnet. Hieraus konnten die entsprechenden α-Koeffizienten hergeleitet werden. Aufgrund der sehr schwachen Dichtestratifizierung ändert der α-Effekt sein Vorzeichen nahezu exakt in der Mitte der Box. Der α-Effekt ist positiv in der oberen Hälfte und negativ in der unteren Hälfte einer auf der Nordhalbkugel rotierenden Box. Für ein starkes Magnetfeld ergibt sich zudem eine deutliche abwärts orientierte Advektion von magnetischem Fluss. Ein Mean-Field Modell des Geodynamos wurde konstruiert, das auf dem α-Effekt basiert, wie er aus den Box-Simulationen berechnet wurde. Für eine äußerst beschränkte Klasse von radialen α-Profilen weist das lineare α^2-Modell Oszillationen auf einer Zeitskala auf, die durch die turbulente Diffusionszeit bestimmt wird. Die wesentlichen Eigenschaften der periodischen Lösungen werden präsentiert, und der Einfluss der Größe des inneren Kerns auf die Charakteristiken des kritischen Bereichs, innerhalb dessen oszillierende Lösungen auftreten, wurden untersucht. Reversals werden als eine halbe Oszillation interpretiert. Sie sind ein recht seltenes Ereignis, da sie lediglich dann stattfinden können, wenn das α-Profil ausreichend lange in dem periodische Lösungen erlaubenden Bereich liegt. Aufgrund starker Fluktuationen auf der konvektiven Zeitskala ist die Wahrscheinlichkeit eines solchen Reversals relativ klein. In einem einfachen nicht-linearen Mean-Field Modell mit realistischen Eingabeparametern, die auf den Box-Simulationen beruhen, konnte die Plausibilität des Reversal-Modells anhand von Langzeitsimulationen belegt werden.
One of the most exciting predictions of Einstein's theory of gravitation that have not yet been proven experimentally by a direct detection are gravitational waves. These are tiny distortions of the spacetime itself, and a world-wide effort to directly measure them for the first time with a network of large-scale laser interferometers is currently ongoing and expected to provide positive results within this decade. One potential source of measurable gravitational waves is the inspiral and merger of two compact objects, such as binary black holes. Successfully finding their signature in the noise-dominated data of the detectors crucially relies on accurate predictions of what we are looking for. In this thesis, we present a detailed study of how the most complete waveform templates can be constructed by combining the results from (A) analytical expansions within the post-Newtonian framework and (B) numerical simulations of the full relativistic dynamics. We analyze various strategies to construct complete hybrid waveforms that consist of a post-Newtonian inspiral part matched to numerical-relativity data. We elaborate on exsisting approaches for nonspinning systems by extending the accessible parameter space and introducing an alternative scheme based in the Fourier domain. Our methods can now be readily applied to multiple spherical-harmonic modes and precessing systems. In addition to that, we analyze in detail the accuracy of hybrid waveforms with the goal to quantify how numerous sources of error in the approximation techniques affect the application of such templates in real gravitational-wave searches. This is of major importance for the future construction of improved models, but also for the correct interpretation of gravitational-wave observations that are made utilizing any complete waveform family. In particular, we comprehensively discuss how long the numerical-relativity contribution to the signal has to be in order to make the resulting hybrids accurate enough, and for currently feasible simulation lengths we assess the physics one can potentially do with template-based searches.
We study buckling instabilities of filaments in biological systems. Filaments in a cell are the building blocks of the cytoskeleton. They are responsible for the mechanical stability of cells and play an important role in intracellular transport by molecular motors, which transport cargo such as organelles along cytoskeletal filaments. Filaments of the cytoskeleton are semiflexible polymers, i.e., their bending energy is comparable to the thermal energy such that they can be viewed as elastic rods on the nanometer scale, which exhibit pronounced thermal fluctuations. Like macroscopic elastic rods, filaments can undergo a mechanical buckling instability under a compressive load. In the first part of the thesis, we study how this buckling instability is affected by the pronounced thermal fluctuations of the filaments. In cells, compressive loads on filaments can be generated by molecular motors. This happens, for example, during cell division in the mitotic spindle. In the second part of the thesis, we investigate how the stochastic nature of such motor-generated forces influences the buckling behavior of filaments. In chapter 2 we review briefly the buckling instability problem of rods on the macroscopic scale and introduce an analytical model for buckling of filaments or elastic rods in two spatial dimensions in the presence of thermal fluctuations. We present an analytical treatment of the buckling instability in the presence of thermal fluctuations based on a renormalization-like procedure in terms of the non-linear sigma model where we integrate out short-wavelength fluctuations in order to obtain an effective theory for the mode of the longest wavelength governing the buckling instability. We calculate the resulting shift of the critical force by fluctuation effects and find that, in two spatial dimensions, thermal fluctuations increase this force. Furthermore, in the buckled state, thermal fluctuations lead to an increase in the mean projected length of the filament in the force direction. As a function of the contour length, the mean projected length exhibits a cusp at the buckling instability, which becomes rounded by thermal fluctuations. Our main result is the observation that a buckled filament is stretched by thermal fluctuations, i.e., its mean projected length in the direction of the applied force increases by thermal fluctuations. Our analytical results are confirmed by Monte Carlo simulations for buckling of semiflexible filaments in two spatial dimensions. We also perform Monte Carlo simulations in higher spatial dimensions and show that the increase in projected length by thermal fluctuations is less pronounced than in two dimensions and strongly depends on the choice of the boundary conditions. In the second part of this work, we present a model for buckling of semiflexible filaments under the action of molecular motors. We investigate a system in which a group of motors moves along a clamped filament carrying a second filament as a cargo. The cargo-filament is pushed against the wall and eventually buckles. The force-generating motors can stochastically unbind and rebind to the filament during the buckling process. We formulate a stochastic model of this system and calculate the mean first passage time for the unbinding of all linking motors which corresponds to the transition back to the unbuckled state of the cargo filament in a mean-field model. Our results show that for sufficiently short microtubules the movement of kinesin-I-motors is affected by the load force generated by the cargo filament. Our predictions could be tested in future experiments.
Quorum-sensing bacteria in a growing colony of cells send out signalling molecules (so-called “autoinducers”) and themselves sense the autoinducer concentration in their vicinity. Once—due to increased local cell density inside a “cluster” of the growing colony—the concentration of autoinducers exceeds a threshold value, cells in this clusters get “induced” into a communal, multi-cell biofilm-forming mode in a cluster-wide burst event. We analyse quantitatively the influence of spatial disorder, the local heterogeneity of the spatial distribution of cells in the colony, and additional physical parameters such as the autoinducer signal range on the induction dynamics of the cell colony. Spatial inhomogeneity with higher local cell concentrations in clusters leads to earlier but more localised induction events, while homogeneous distributions lead to comparatively delayed but more concerted induction of the cell colony, and, thus, a behaviour close to the mean-field dynamics. We quantify the induction dynamics with quantifiers such as the time series of induction events and burst sizes, the grouping into induction families, and the mean autoinducer concentration levels. Consequences for different scenarios of biofilm growth are discussed, providing possible cues for biofilm control in both health care and biotechnology.
Noise is ubiquitous in nature and usually results in rich dynamics in stochastic systems such as oscillatory systems, which exist in such various fields as physics, biology and complex networks. The correlation and synchronization of two or many oscillators are widely studied topics in recent years.
In this thesis, we mainly investigate two problems, i.e., the stochastic bursting phenomenon in noisy excitable systems and synchronization in a three-dimensional Kuramoto model with noise. Stochastic bursting here refers to a sequence of coherent spike train, where each spike has random number of followers due to the combined effects of both time delay and noise. Synchronization, as a universal phenomenon in nonlinear dynamical systems, is well illustrated in the Kuramoto model, a prominent model in the description of collective motion.
In the first part of this thesis, an idealized point process, valid if the characteristic timescales in the problem are well separated, is used to describe statistical properties such as the power spectral density and the interspike interval distribution. We show how the main parameters of the point process, the spontaneous excitation rate, and the probability to induce a spike during the delay action can be calculated from the solutions of a stationary and a forced Fokker-Planck equation. We extend it to the delay-coupled case and derive analytically the statistics of the spikes in each neuron, the pairwise correlations between any two neurons, and the spectrum of the total output from the network.
In the second part, we investigate the three-dimensional noisy Kuramoto model, which can be used to describe the synchronization in a swarming model with helical trajectory. In the case without natural frequency, the Kuramoto model can be connected with the Vicsek model, which is widely studied in collective motion and swarming of active matter. We analyze the linear stability of the incoherent state and derive the critical coupling strength above which the incoherent state loses stability. In the limit of no natural frequency, an exact self-consistent equation of the mean field is derived and extended straightforward to any high-dimensional case.
Contents: I. Algorithms 1. Theoretical Backround 2. Numerical Procedures 3. Graph Representation of the Solutions 4. Applications and Example II. Users' Manual 5. About the Program 6. The Course of a Qualitative Analysis 7. The Model Module 8. Input description 9. Output Description 10. Example 11. Graphics
The Casimir-Polder interaction between a single neutral atom and a nearby surface, arising from the (quantum and thermal) fluctuations of the electromagnetic field, is a cornerstone of cavity quantum electrodynamics (cQED), and theoretically well established. Recently, Bose-Einstein condensates (BECs) of ultracold atoms have been used to test the predictions of cQED. The purpose of the present thesis is to upgrade single-atom cQED with the many-body theory needed to describe trapped atomic BECs. Tools and methods are developed in a second-quantized picture that treats atom and photon fields on the same footing. We formulate a diagrammatic expansion using correlation functions for both the electromagnetic field and the atomic system. The formalism is applied to investigate, for BECs trapped near surfaces, dispersion interactions of the van der Waals-Casimir-Polder type, and the Bosonic stimulation in spontaneous decay of excited atomic states. We also discuss a phononic Casimir effect, which arises from the quantum fluctuations in an interacting BEC.
This thesis investigates the Casimir effect between plates made of normal and superconducting metals over a broad range of temperatures, as well as the Casimir-Polder interaction of an atom to such a surface. Numerical and asymptotical calculations have been the main tools in order to do so. The optical properties of the surfaces are described by dielectric functions or optical conductivities, which are reviewed for common models and have been analyzed with special weight on distributional properties and causality. The calculation of the Casimir energy between two normally conducting plates (cavity) is reviewed and previous work on the contribution to the Casimir energy due to the surface plasmons, present in all metallic cavities, has been generalized to finite temperatures for the first time. In the field of superconductivity, a new analytical continuation of the BCS conductivity to to purely imaginary frequencies has been obtained both inside and outside the extremely dirty limit of vanishing mean free path. The Casimir free energy calculated from this description was shown to coincide well with the values obtained from the two fluid model of superconductivity in certain regimes of the material parameters. The Casimir entropy in a superconducting cavity fulfills the third law of thermodynamics and features a characteristic discontinuity at the phase transition temperature. These effects were equally encountered in the Casimir-Polder interaction of an atom with a superconducting wall. The magnetic dipole coupling of an atom to a metal was shown to be highly sensible to dissipation and especially to the surface currents. This leads to a strong quenching of the magnetic Casimir-Polder energy at finite temperature. Violations of the third law of thermodynamics are encountered in special models, similar to phenomena in the Casimir-effect between two plates, that are debated controversely. None of these effects occurs in the analog electric dipole interaction. The results of this work suggest to reestablish the well-known plasma model as the low temperature limit of a superconductor as in London theory rather than use it for the description of normal metals. Superconductors offer the opportunity to control the dissipation of surface currents to a great extent. This could be used to access experimentally the low frequency optical response of metals, which is strongly connected to the thermal Casimir-effect. Here, differently from corresponding microwave experiments, energy and momentum are independent quantities. A measurement of the total Casimir-Polder interaction of atoms with superconductors seems to be in reach in today’s microchip-based atom-traps and the contribution due to magnetic coupling might be accessed by spectroscopic techniques
Herein, we report the chain-growth tin-free room temperature polymerization method to synthesize n-type perylene diimide-dithiophene-based conjugated polymers (PPDIT2s) suitable for solar cell and transistor applications. The palladium/electron-rich tri-tert-butylphosphine catalyst is effective to enable the chain-growth polymerization of anion-radical monomer Br-TPDIT-Br/Zn to PPDIT2 with a molecular weight up to Mw ≈ 50 kg mol−1 and moderate polydispersity. This is the second example of the polymerization of unusual anion-radical aromatic complexes formed in a reaction of active Zn and electron-deficient diimide-based aryl halides. As such, the discovered polymerization method is not a specific reactivity feature of the naphthalene-diimide derivatives but is rather a general polymerization tool. This is an important finding, given the significantly higher maximum external quantum efficiency that can be reached with PDI-based copolymers (32–45%) in all-polymer solar cells compared to NDI-based materials (15–30%). Our studies revealed that PPDIT2 synthesized by the new method and the previously published polymer prepared by step-growth Stille polycondensation show similar electron mobility and all-polymer solar cell performance. At the same time, the polymerization reported herein has several technological advantages as it proceeds relatively fast at room temperature and does not involve toxic tin-based compounds. Because several chain-growth polymerization reactions are well-suited for the preparation of well-defined multi-functional polymer architectures, the next target is to explore the utility of the discovered polymerization in the synthesis of end-functionalized polymers and block copolymers. Such materials would be helpful to improve the nanoscale morphology of polymer blends in all-polymer solar cells.
This work investigates diffusion in nonlinear Hamiltonian systems. The diffusion, more precisely subdiffusion, in such systems is induced by the intrinsic chaotic behavior of trajectories and thus is called chaotic diffusion''. Its properties are studied on the example of one- or two-dimensional lattices of harmonic or nonlinear oscillators with nearest neighbor couplings. The fundamental observation is the spreading of energy for localized initial conditions. Methods of quantifying this spreading behavior are presented, including a new quantity called excitation time. This new quantity allows for a more precise analysis of the spreading than traditional methods. Furthermore, the nonlinear diffusion equation is introduced as a phenomenologic description of the spreading process and a number of predictions on the density dependence of the spreading are drawn from this equation. Two mathematical techniques for analyzing nonlinear Hamiltonian systems are introduced. The first one is based on a scaling analysis of the Hamiltonian equations and the results are related to similar scaling properties of the NDE. From this relation, exact spreading predictions are deduced. Secondly, the microscopic dynamics at the edge of spreading states are thoroughly analyzed, which again suggests a scaling behavior that can be related to the NDE. Such a microscopic treatment of chaotically spreading states in nonlinear Hamiltonian systems has not been done before and the results present a new technique of connecting microscopic dynamics with macroscopic descriptions like the nonlinear diffusion equation. All theoretical results are supported by heavy numerical simulations, partly obtained on one of Europe's fastest supercomputers located in Bologna, Italy. In the end, the highly interesting case of harmonic oscillators with random frequencies and nonlinear coupling is studied, which resembles to some extent the famous Discrete Anderson Nonlinear Schroedinger Equation. For this model, a deviation from the widely believed power-law spreading is observed in numerical experiments. Some ideas on a theoretical explanation for this deviation are presented, but a conclusive theory could not be found due to the complicated phase space structure in this case. Nevertheless, it is hoped that the techniques and results presented in this work will help to eventually understand this controversely discussed case as well.
In this work, binding interactions between biomolecules were analyzed by a technique that is based on electrically controllable DNA nanolevers. The technique was applied to virus-receptor interactions for the first time. As receptors, primarily peptides on DNA nanostructures and antibodies were utilized. The DNA nanostructures were integrated into the measurement technique and enabled the presentation of the peptides in a controllable geometrical order. The number of peptides could be varied to be compatible to the binding sites of the viral surface proteins.
Influenza A virus served as a model system, on which the general measurability was demonstrated. Variations of the receptor peptide, the surface ligand density, the measurement temperature and the virus subtypes showed the sensitivity and applicability of the technology. Additionally, the immobilization of virus particles enabled the measurement of differences in oligovalent binding of DNA-peptide nanostructures to the viral proteins in their native environment.
When the coronavirus pandemic broke out in 2020, work on binding interactions of a peptide from the hACE2 receptor and the spike protein of the SARS-CoV-2 virus revealed that oligovalent binding can be quantified in the switchSENSE technology. It could also be shown that small changes in the amino acid sequence of the spike protein resulted in complete loss of binding. Interactions of the peptide and inactivated virus material as well as pseudo virus particles could be measured. Additionally, the switchSENSE technology was utilized to rank six antibodies for their binding affinity towards the nucleocapsid protein of SARS-CoV-2 for the development of a rapid antigen test device.
The technique was furthermore employed to show binding of a non-enveloped virus (adenovirus) and a virus-like particle (norovirus-like particle) to antibodies. Apart from binding interactions, the use of DNA origami levers with a length of around 50 nm enabled the switching of virus material. This proved that the technology is also able to size objects with a hydrodynamic diameter larger than 14 nm.
A theoretical work on diffusion and reaction-limited binding interactions revealed that the technique and the chosen parameters enable the determination of binding rate constants in the reaction-limited regime.
Overall, the applicability of the switchSENSE technique to virus-receptor binding interactions could be demonstrated on multiple examples. While there are challenges that remain, the setup enables the determination of affinities between viruses and receptors in their native environment. Especially the possibilities regarding the quantification of oligo- and multivalent binding interactions could be presented.
The performance of the recently commissioned spectrometer PEAXIS for resonant inelastic soft X-ray scattering (RIXS) and X-ray photoelectron spectroscopy and its hosting beamline U41-PEAXIS at the BESSY II synchrotron are characterized. The beamline provides linearly polarized light from 180 eV to 1600 eV allowing for RIXS measurements in the range 200-1200 eV. The monochromator optics can be operated in different configurations to provide either high flux with up to 10(12) photons s(-1) within the focal spot at the sample or high energy resolution with a full width at half maximum of <40 meV at an incident photon energy of similar to 400 eV. The measured total energy resolution of the RIXS spectrometer is in very good agreement with theoretically predicted values obtained by ray-tracing simulations. PEAXIS features a 5 m-long RIXS spectrometer arm that can be continuously rotated about the sample position by 106 degrees within the horizontal photon scattering plane, thus enabling the study of momentum-transfer-dependent excitations. Selected scientific examples are presented to demonstrate the instrument capabilities, including measurements of excitations in single-crystalline NiO and in liquid acetone employing a fluid cell sample manipulator. Planned upgrades of the beamline and the RIXS spectrometer to further increase the energy resolution to similar to 100 meV at 1000 eV incident photon energy are discussed.
We investigate properties of quantum mechanical systems in the light of quantum information theory. We put an emphasize on systems with infinite-dimensional Hilbert spaces, so-called continuous-variable systems'', which are needed to describe quantum optics beyond the single photon regime and other Bosonic quantum systems. We present methods to obtain a description of such systems from a series of measurements in an efficient manner and demonstrate the performance in realistic situations by means of numerical simulations. We consider both unconditional quantum state tomography, which is applicable to arbitrary systems, and tomography of matrix product states. The latter allows for the tomography of many-body systems because the necessary number of measurements scales merely polynomially with the particle number, compared to an exponential scaling in the generic case. We also present a method to realize such a tomography scheme for a system of ultra-cold atoms in optical lattices. Furthermore, we discuss in detail the possibilities and limitations of using continuous-variable systems for measurement-based quantum computing. We will see that the distinction between Gaussian and non-Gaussian quantum states and measurements plays an crucial role. We also provide an algorithm to solve the large and interesting class of naturally occurring Hamiltonians, namely frustration free ones, efficiently and use this insight to obtain a simple approximation method for slightly frustrated systems. To achieve this goals, we make use of, among various other techniques, the well developed theory of matrix product states, tensor networks, semi-definite programming, and matrix analysis.
Strange nonchaotic attractors typically appear in quasiperiodically driven nonlinear systems. Two methods of their characterization are proposed. The first one is based on the bifurcation analysis of the systems, resulting from periodic approximations of the quasiperiodic forcing. Secondly, we propose th characterize their strangeness by calculating a phase sensitivity exponent, that measures the sensitivity with respect to changes of the phase of the external force. It is shown, that phase sensitivity appears if there is a non-zero probability for positive local Lyapunov exponents to occur.
The dynamics of noisy bistable systems is analyzed by means of Lyapunov exponents and measures of complexity. We consider both the classical Kramers problem with additive white noise and the case when the barrier fluctuates due to additional external colored noise. In case of additive noise we calculate the Lyapunov exponents and all measures of complexity analytically as functions of the noise intensity resp. the mean escape time. For the problem of fluctuating barrier the usual description of the dynamics with the mean escape time is not sufficient. The application of the concept of measures of complexity allows to describe the structures of motion in more detail. Most complexity measures sign the value of correlation time at which the phenomenon of resonant activation occurs with an extremum.
Over the past decades, there has been a growing interest in ‘extreme events’ owing to the increasing threats that climate-related extremes such as floods, heatwaves, droughts, etc., pose to society. While extreme events have diverse definitions across various disciplines, ranging from earth science to neuroscience, they are characterized mainly as dynamic occurrences within a limited time frame that impedes the normal functioning of a system. Although extreme events are rare in occurrence, it has been found in various hydro-meteorological and physiological time series (e.g., river flows, temperatures, heartbeat intervals) that they may exhibit recurrent behavior, i.e., do not end the lifetime of the system. The aim of this thesis to develop some
sophisticated methods to study various properties of extreme events.
One of the main challenges in analyzing such extreme event-like time series is that they have large temporal gaps due to the paucity of the number of observations of extreme events. As a result, existing time series analysis tools are usually not helpful to decode the underlying
information. I use the edit distance (ED) method to analyze extreme event-like time series in their unaltered form. ED is a specific distance metric, mainly designed to measure the similarity/dissimilarity between point process-like data. I combine ED with recurrence plot techniques to identify the recurrence property of flood events in the Mississippi River in the United States. I also use recurrence quantification analysis to show the deterministic properties
and serial dependency in flood events.
After that, I use this non-linear similarity measure (ED) to compute the pairwise dependency in extreme precipitation event series. I incorporate the similarity measure within the framework of complex network theory to study the collective behavior of climate extremes. Under this architecture, the nodes are defined by the spatial grid points of the given spatio-temporal climate dataset. Each node is associated with a time series corresponding to the temporal evolution
of the climate observation at that grid point. Finally, the network links are functions of the pairwise statistical interdependence between the nodes. Various network measures, such as degree, betweenness centrality, clustering coefficient, etc., can be used to quantify the network’s topology. We apply the methodology mentioned above to study the spatio-temporal coherence pattern of extreme rainfall events in the United States and the Ganga River basin, which reveals its relation to various climate processes and the orography of the region.
The identification of precursors associated with the occurrence of extreme events in the near future is extremely important to prepare the masses for an upcoming disaster and mitigate the potential risks associated with such events. Under this motivation, I propose an in-data prediction recipe for predicting the data structures that typically occur prior to extreme events using the Echo state network, a type of Recurrent Neural Network which is a part of the reservoir
computing framework. However, unlike previous works that identify precursory structures in the same variable in which extreme events are manifested (active variable), I try to predict these structures by using data from another dynamic variable (passive variable) which does not show large excursions from the nominal condition but carries imprints of these extreme events. Furthermore, my results demonstrate that the quality of prediction depends on the magnitude
of events, i.e., the higher the magnitude of the extreme, the better is its predictability skill. I show quantitatively that this is because the input signals collectively form a more coherent pattern for an extreme event of higher magnitude, which enhances the efficiency of the machine to predict the forthcoming extreme events.
Auf der Grundlage von Sonnenphotometermessungen an drei Messstationen (AWIPEV/ Koldewey in Ny-Ålesund (78.923 °N, 11.923 °O) 1995–2008, 35. Nordpol Driftstation – NP-35 (84.3–85.5 °N, 41.7–56.6 °O) März/April 2008, Sodankylä (67.37 °N, 26.65 °O) 2004–2007) wird die Aerosolvariabilität in der europäischen Arktis und deren Ursachen untersucht. Der Schwerpunkt liegt dabei auf der Frage des Zusammenhanges zwischen den an den Stationen gemessenen Aerosolparametern (Aerosol optische Dicke, Angström Koeffizient, usw.) und dem Transport des Aerosols sowohl auf kurzen Zeitskalen (Tagen) als auch auf langen Zeitskalen (Monate, Jahre). Um diesen Zusammenhang herzustellen, werden für die kurzen Zeitskalen mit dem Trajektorienmodell PEP-Tracer 5-Tage Rückwärtstrajektorien in drei Starthöhen (850 hPa, 700 hPa, 500 hPa) für die Uhrzeiten 00, 06, 12 und 18 Uhr berechnet. Mit Hilfe der nicht-hierarchischen Clustermethode k-means werden die berechneten Rückwärtstrajektorien dann zu Gruppen zusammengefasst und bestimmten Quellgebieten und den gemessenen Aerosol optischen Dicken zugeordnet. Die Zuordnung von Aerosol optischer Dicke und Quellregion ergibt keinen eindeutigen Zusammenhang zwischen dem Transport verschmutzter Luftmassen aus Europa oder Russland bzw. Asien und erhöhter Aerosol optischer Dicke. Dennoch ist für einen konkreten Einzelfall (März 2008) ein direkter Zusammenhang von Aerosoltransport und hohen Aerosol optischen Dicken nachweisbar. In diesem Fall gelangte Waldbrandaerosol aus Südwestrussland in die Arktis und konnte sowohl auf der NP-35 als auch in Ny-Ålesund beobachtet werden. In einem weiteren Schritt wird mit Hilfe der EOF-Analyse untersucht, inwieweit großskalige atmosphärische Zirkulationsmuster für die Aerosolvariabilität in der europäischen Arktis verantwortlich sind. Ähnlich wie bei der Trajektorienanalyse ist auch die Verbindung der atmosphärischen Zirkulation zu den Photometermessungen an den Stationen in der Regel nur schwach ausgeprägt. Eine Ausnahme findet sich bei der Betrachtung des Jahresganges des Bodendruckes und der Aerosol optischen Dicke. Hohe Aerosol optische Dicken treten im Frühjahr zum einen dann auf, wenn durch das Islandtief und das sibirische Hochdruckgebiet Luftmassen aus Europa oder Russland/Asien in die Arktis gelangen, und zum anderen, wenn sich ein kräftiges Hochdruckgebiet über Grönland und weiten Teilen der Arktis befindet. Ebenso zeigt sich, dass der Übergang zwischen Frühjahr und Sommer zumindest teilweise bedingt ist durch denWechsel vom stabilen Polarhoch im Winter und Frühjahr zu einer stärker von Tiefdruckgebieten bestimmten arktischen Atmosphäre im Sommer. Die geringere Aerosolkonzentration im Sommer kann zum Teil mit einer Zunahme der nassen Deposition als Aerosolsenke begründet werden. Für Ny-Ålesund wird neben den Transportmustern auch die chemische Zusammensetzung des Aerosols mit Hilfe von Impaktormessungen an der Zeppelinstation auf dem Zeppelinberg (474m ü.NN) nahe Ny-Ålesund abgeleitet. Dabei ist die positive Korrelation der Aerosoloptischen Dicke mit der Konzentration von Sulfationen und Ruß sehr deutlich. Beide Stoffe gelangen zu einem Großteil durch anthropogene Emissionen in die Atmosphäre. Die damit nachweisbar anthropogen geprägte Zusammensetzung des arktischen Aerosols steht im Widerspruch zum nicht eindeutig herstellbaren Zusammenhang mit dem Transport des Aerosols aus Industrieregionen. Dies kann nur durch einen oder mehrere gleichzeitig stattfindende Transformationsprozesse (z. B. Nukleation von Schwefelsäurepartikeln) während des Transportes aus den Quellregionen (Europa, Russland) erklärt werden.
This thesis discusses heat and charge transport phenomena in single-crystalline Silicon penetrated by nanometer-sized pores, known as mesoporous Silicon (pSi). Despite the extensive attention given to it as a thermoelectric material of interest, studies on microscopic thermal and electronic transport beyond its macroscopic characterizations are rarely reported. In contrast, this work reports the interplay of both.
PSi samples synthesized by electrochemical anodization display a temperature dependence of specific heat 𝐶𝑝 that deviates from the characteristic 𝑇^3 behaviour (at 𝑇<50𝐾). A thorough analysis reveals that both 3D and 2D Einstein and Debye modes contribute to this specific heat. Additional 2D Einstein modes (~3 𝑚𝑒𝑉) agree reasonably well with the boson peak of SiO2 in pSi pore walls. 2D Debye modes are proposed to account for surface acoustic modes causing a significant deviation from the well-known 𝑇^3 dependence of 𝐶𝑝 at 𝑇<50𝐾.
A novel theoretical model gives insights into the thermal conductivity of pSi in terms of porosity and phonon scattering on the nanoscale. The thermal conductivity analysis utilizes the peculiarities of the pSi phonon dispersion probed by the inelastic neutron scattering experiments. A phonon mean-free path of around 10 𝑛𝑚 extracted from the presented model is proposed to cause the reduced thermal conductivity of pSi by two orders of magnitude compared to p-doped bulk Silicon. Detailed analysis indicates that compound averaging may cause a further 10-50% reduction. The percolation threshold of 65% for thermal conductivity of pSi samples is subsequently determined by employing theoretical effective medium models.
Temperature-dependent electrical conductivity measurements reveal a thermally activated transport process. A detailed analysis of the activation energy 𝐸𝐴𝜎 in the thermally activated transport exhibits a Meyer Neldel compensation rule between different samples that originates in multi-phonon absorption upon carrier transport. Activation energies 𝐸𝐴𝑆 obtained from temperature-dependent thermopower measurements provide further evidence for multi-phonon assisted hopping between localized states as a dominant charge transport mechanism in pSi, as they systematically differ from the determined 𝐸𝐴𝜎 values.
Tremendous progress in the development of thin film solar cell techniques has been made over the last decade. The field of organic solar cells is constantly developing, new material classes like Perowskite solar cells are emerging and different types of hybrid organic/inorganic material combinations are being investigated for their physical properties and their applicability in thin film electronics. Besides typical single-junction architectures for solar cells, multi-junction concepts are also being investigated as they enable the overcoming of theoretical limitations of a single-junction. In multi-junction devices each sub-cell operates in different wavelength regimes and should exhibit optimized band-gap energies. It is exactly this tunability of the band-gap energy that renders organic solar cell materials interesting candidates for multi-junction applications. Nevertheless, only few attempts have been made to combine inorganic and organic solar cells in series connected multi-junction architectures. Even though a great diversity of organic solar cells exists nowadays, their open circuit voltage is usually low compared to the band-gap of the active layer. Hence, organic low band-gap solar cells in particular show low open circuit voltages and the key factors that determine the voltage losses are not yet fully understood. Besides open circuit voltage losses the recombination of charges in organic solar cells is also a prevailing research topic, especially with respect to the influence of trap states.
The exploratory focus of this work is therefore set, on the one hand, on the development of hybrid organic/inorganic multi-junctions and, on the other hand, on gaining a deeper understanding of the open circuit voltage and the recombination processes of organic solar cells.
In the first part of this thesis, the development of a hybrid organic/inorganic triple-junction will be discussed which showed at that time (Jan. 2015) a record power conversion efficiency of 11.7%. The inorganic sub-cells of these devices consist of hydrogenated amorphous silicon and were delivered by the Competence Center Thin-Film and Nanotechnology for Photovoltaics in Berlin. Different recombination contacts and organic sub-cells were tested in conjunction with these inorganic sub-cells on the basis of optical modeling predictions for the optimal layer thicknesses to finally reach record efficiencies for this type of solar cells.
In the second part, organic model systems will be investigated to gain a better understanding of the fundamental loss mechanisms that limit the open circuit voltage of organic solar cells. First, bilayer systems with different orientation of the donor and acceptor molecules were investigated to study the influence of the donor/acceptor orientation on non-radiative voltage loss. Secondly, three different bulk heterojunction solar cells all comprising the same amount of fluorination and the same polymer backbone in the donor component were examined to study the influence of long range electrostatics on the open circuit voltage. Thirdly, the device performance of two bulk heterojunction solar cells was compared which consisted of the same donor polymer but used different fullerene acceptor molecules. By this means, the influence of changing the energetics of the acceptor component on the open circuit voltage was investigated and a full analysis of the charge carrier dynamics was presented to unravel the reasons for the worse performance of the solar cell with the higher open circuit voltage. In the third part, a new recombination model for organic solar cells will be introduced and its applicability shown for a typical low band-gap cell. This model sheds new light on the recombination process in organic solar cells in a broader context as it re-evaluates the recombination pathway of charge carriers in devices which show the presence of trap states. Thereby it addresses a current research topic and helps to resolve alleged discrepancies which can arise from the interpretation of data derived by different measurement techniques.
Electrets are materials capable of storing oriented dipoles or an electric surplus charge for long periods of time. The term "electret" was coined by Oliver Heaviside in analogy to the well-known word "magnet". Initially regarded as a mere scientific curiosity, electrets became increasingly imporant for applications during the second half of the 20th century. The most famous example is the electret condenser microphone, developed in 1962 by Sessler and West. Today, these devices are produced in annual quantities of more than 1 billion, and have become indispensable in modern communications technology. Even though space-charge electrets are widely used in transducer applications, relatively little was known about the microscopic mechanisms of charge storage. It was generally accepted that the surplus charges are stored in some form of physical or chemical traps. However, trap depths of less than 2 eV, obtained via thermally stimulated discharge experiments, conflicted with the observed lifetimes (extrapolations of experimental data yielded more than 100000 years). Using a combination of photostimulated discharge spectroscopy and simultaneous depth-profiling of the space-charge density, the present work shows for the first time that at least part of the space charge in, e.g., polytetrafluoroethylene, polypropylene and polyethylene terephthalate is stored in traps with depths of up to 6 eV, indicating major local structural changes. Based on this information, more efficient charge-storing materials could be developed in the future. The new experimental results could only be obtained after several techniques for characterizing the electrical, electromechanical and electrical properties of electrets had been enhanced with in situ capability. For instance, real-time information on space-charge depth-profiles were obtained by subjecting a polymer film to short laser-induced heat pulses. The high data acquisition speed of this technique also allowed the three-dimensional mapping of polarization and space-charge distributions. A highly active field of research is the development of piezoelectric sensor films from electret polymer foams. These materials store charges on the inner surfaces of the voids after having been subjected to a corona discharge, and exhibit piezoelectric properties far superior to those of traditional ferroelectric polymers. By means of dielectric resonance spectroscopy, polypropylene foams (presently the most widely used ferroelectret) were studied with respect to their thermal and UV stability. Their limited thermal stability renders them unsuitable for applications above 50 °C. Using a solvent-based foaming technique, we found an alternative material based on amorphous Teflon® AF, which exhibits a stable piezoelectric coefficient of 600 pC/N at temperatures up to 120 °C.
In view of the importance of charge storage in polymer electrets for electromechanical transducer applications, the aim of this work is to contribute to the understanding of the charge-retention mechanisms. Furthermore, we will try to explain how the long-term storage of charge carriers in polymeric electrets works and to identify the probable trap sites. Charge trapping and de-trapping processes were investigated in order to obtain evidence of the trap sites in polymeric electrets. The charge de-trapping behavior of two particular polymer electrets was studied by means of thermal and optical techniques. In order to obtain evidence of trapping or de-trapping, charge and dipole profiles in the thickness direction were also monitored. In this work, the study was performed on polyethylene terephthalate (PETP) and on cyclic-olefin copolymers (COCs). PETP is a photo-electret and contains a net dipole moment that is located in the carbonyl group (C = O). The electret behavior of PETP arises from both the dipole orientation and the charge storage. In contrast to PETP, COCs are not photo-electrets and do not exhibit a net dipole moment. The electret behavior of COCs arises from the storage of charges only. COC samples were doped with dyes in order to probe their internal electric field. COCs show shallow charge traps at 0.6 and 0.11 eV, characteristic for thermally activated processes. In addition, deep charge traps are present at 4 eV, characteristic for optically stimulated processes. PETP films exhibit a photo-current transient with a maximum that depends on the temperature with an activation energy of 0.106 eV. The pair thermalization length (rc) calculated from this activation energy for the photo-carrier generation in PETP was estimated to be approx. 4.5 nm. The generated photo-charge carriers can recombine, interact with the trapped charge, escape through the electrodes or occupy an empty trap. PETP possesses a small quasi-static pyroelectric coefficient (QPC): ~0.6 nC/(m²K) for unpoled samples, ~60 nC/(m²K) for poled samples and ~60 nC/(m²K) for unpoled samples under an electric bias (E ~10 V/µm). When stored charges generate an internal electric field of approx. 10 V/µm, they are able to induce a QPC comparable to that of the oriented dipoles. Moreover, we observe charge-dipole interaction. Since the raw data of the QPC-experiments on PETP samples is noisy, a numerical Fourier-filtering procedure was applied. Simulations show that the data analysis is reliable when the noise level is up to 3 times larger than the calculated pyroelectric current for the QPC. PETP films revealed shallow traps at approx. 0.36 eV during thermally-stimulated current measurements. These energy traps are associated with molecular dipole relaxations (C = O). On the other hand, photo-activated measurements yield deep charge traps at 4.1 and 5.2 eV. The observed wavelengths belong to the transitions in PETP that are analogous to the π - π* benzene transitions. The observed charge de-trapping selectivity in the photocharge decay indicates that the charge detrapping is from a direct photon-charge interaction. Additionally, the charge de-trapping can be facilitated by photo-exciton generation and the interaction of the photo-excitons with trapped charge carriers. These results indicate that the benzene rings (C6H4) and the dipolar groups (C = O) can stabilize and share an extra charge carrier in a chemical resonance. In this way, this charge could be de-trapped in connection with the photo-transitions of the benzene ring and with the dipole relaxations. The thermally-activated charge release shows a difference in the trap depth to its optical counterpart. This difference indicates that the trap levels depend on the de-trapping process and on the chemical nature of the trap site. That is, the processes of charge detrapping from shallow traps are related to secondary forces. The processes of charge de-trapping from deep traps are related to primary forces. Furthermore, the presence of deep trap levels causes the stability of the charge for long periods of time.
This work explores the equilibrium structure and thermodynamic phase behavior of complexes formed by charged polymer chains (polyelectrolytes) and oppositely charged spheres (macroions). Polyelectrolyte-macroion complexes form a common pattern in soft-matter physics, chemistry and biology, and enter in numerous technological applications as well. From a fundamental point of view, such complexes are interesting in that they combine the subtle interplay between electrostatic interactions and elastic as well as entropic effects due to conformational changes of the polymer chain, giving rise to a wide range of structural properties. This forms the central theme of theoretical studies presented in this thesis, which concentrate on a number of different problems involving strongly coupled complexes, i.e. complexes that are characterized by a large adsorption energy and small chain fluctuations. In the first part, a global analysis of the structural phase behavior of a single polyelectrolyte-macroion complex is presented based on a dimensionless representation, yielding results that cover a wide range of realistic system parameters. Emphasize is made on the interplay between the effects due to the polyelectrolytes chain length, salt concentration and the macroion charge as well as the mechanical chain persistence length. The results are summarized into generic phase diagrams characterizing the wrapping-dewrapping behavior of a polyelectrolyte chain on a macroion. A fully wrapped chain state is typically obtained at intermediate salt concentrations and chain lengths, where the amount of polyelectrolyte charge adsorbed on the macroion typically exceeds the bare macroion charge leading thus to a highly overcharged complex. Perhaps the most striking features occur when a single long polyelectrolyte chain is complexed with many oppositely charged spheres. In biology, such complexes form between DNA (which carries the cell's genetic information) and small oppositely charged histone proteins serving as an efficient mechanism for packing a huge amount of DNA into the micron-size cell nucleus in eucaryotic cells. The resultant complex fiber, known as the chromatin fiber, appears with a diameter of 30~nm under physiological conditions. Recent experiments indicate a zig-zag spatial arrangement for individual DNA-histone complexes (nucleosome core particles) along the chromatin fiber. A numerical method is introduced in this thesis based on a simple generic chain-sphere cell model that enables one to investigate the mechanism of fiber formation on a systematic level by incorporating electrostatic and elastic contributions. As will be shown, stable complex fibers exhibit an impressive variety of structures including zig-zag, solenoidal and beads-on-a-string patterns, depending on system parameters such as salt concentration, sphere charge as well as the chain contour length (per sphere). The present results predict fibers of compact zig-zag structure within the physiologically relevant regime with a diameter of about 30~nm, when DNA-histone parameters are adopted. In the next part, a numerical method is developed in order to investigate the role of thermal fluctuations on the structure and thermodynamic phase behavior of polyelectrolyte-macroion complexes. This is based on a saddle-point approximation, which allows to describe the experimentally observed reaction (or complexation) equilibrium in a dilute solution of polyelectrolytes and macroions on a systematic level. This equilibrium is determined by the entropy loss a single polyelectrolyte chain suffers as it binds to an oppositely charged macroion. This latter quantity can be calculated from the spectrum of polyelectrolyte fluctuations around a macroion, which is determined by means of a normal-mode analysis. Thereby, a stability phase diagram is obtained, which exhibits qualitative agreement with experimental findings. At elevated complex concentrations, one needs to account for the inter-complex interactions as well. It will be shown that at small separations, complexes undergo structural changes in such a way that positive patches from one complex match up with negative patches on the other. Furthermore, one of the polyelectrolyte chains may bridge between the two complexes. These mechanisms lead to a strong inter-complex attraction. As a result, the second virial coefficient associated with the inter-complex interaction becomes negative at intermediate salt concentrations in qualitative agreement with recent experiments on solutions of nucleosome core particles.
One of the rules-of-thumb of colloid and surface physics is that most surfaces are charged when in contact with a solvent, usually water. This is the case, for instance, in charge-stabilized colloidal suspensions, where the surface of the colloidal particles are charged (usually with a charge of hundreds to thousands of e, the elementary charge), monolayers of ionic surfactants sitting at an air-water interface (where the water-loving head groups become charged by releasing counterions), or bilayers containing charged phospholipids (as cell membranes). In this work, we look at some model-systems that, although being a simplified version of reality, are expected to capture some of the physical properties of real charged systems (colloids and electrolytes). We initially study the simple double layer, composed by a charged wall in the presence of its counterions. The charges at the wall are smeared out and the dielectric constant is the same everywhere. The Poisson-Boltzmann (PB) approach gives asymptotically exact counterion density profiles around charged objects in the weak-coupling limit of systems with low-valent counterions, surfaces with low charge density and high temperature (or small Bjerrum length). Using Monte Carlo simulations, we obtain the profiles around the charged wall and compare it with both Poisson-Boltzmann (in the low coupling limit) and the novel strong coupling (SC) theory in the opposite limit of high couplings. In the latter limit, the simulations show that the SC leads in fact to asymptotically correct density profiles. We also compare the Monte Carlo data with previously calculated corrections to the Poisson-Boltzmann theory. We also discuss in detail the methods used to perform the computer simulations. After studying the simple double layer in detail, we introduce a dielectric jump at the charged wall and investigate its effect on the counterion density distribution. As we will show, the Poisson-Boltzmann description of the double layer remains a good approximation at low coupling values, while the strong coupling theory is shown to lead to the correct density profiles close to the wall (and at all couplings). For very large couplings, only systems where the difference between the dielectric constants of the wall and of the solvent is small are shown to be well described by SC. Another experimentally relevant modification to the simple double layer is to make the charges at the plane discrete. The counterions are still assumed to be point-like, but we constraint the distance of approach between ions in the plane and counterions to a minimum distance D. The ratio between D and the distance between neighboring ions in the plane is, as we will see, one of the important quantities in determining the influence of the discrete nature of the charges at the wall over the density profiles. Another parameter that plays an important role, as in the previous case, is the coupling as we will demonstrate, systems with higher coupling are more subject to discretization effects than systems with low coupling parameter. After studying the isolated double layer, we look at the interaction between two double layers. The system is composed by two equally charged walls at distance d, with the counterions confined between them. The charge at the walls is smeared out and the dielectric constant is the same everywhere. Using Monte-Carlo simulations we obtain the inter-plate pressure in the global parameter space, and the pressure is shown to be negative (attraction) at certain conditions. The simulations also show that the equilibrium plate separation (where the pressure changes from attractive to repulsive) exhibits a novel unbinding transition. We compare the Monte Carlo results with the strong-coupling theory, which is shown to describe well the bound states of systems with moderate and high couplings. The regime where the two walls are very close to each other is also shown to be well described by the SC theory. Finally, Using a field-theoretic approach, we derive the exact low-density ("virial") expansion of a binary mixture of positively and negatively charged hard spheres (two-component hard-core plasma, TCPHC). The free energy obtained is valid for systems where the diameters d_+ and d_- and the charge valences q_+ and q_- of positive and negative ions are unconstrained, i.e., the same expression can be used to treat dilute salt solutions (where typically d_+ ~ d_- and q_+ ~ q_-) as well as colloidal suspensions (where the difference in size and valence between macroions and counterions can be very large). We also discuss some applications of our results.
The present thesis was born and evolved within the RAdial Velocity Experiment (RAVE) with the goal of measuring chemical abundances from the RAVE spectra and exploit them to investigate the chemical gradients along the plane of the Galaxy to provide constraints on possible Galactic formation scenarios. RAVE is a large spectroscopic survey which aims to observe spectroscopically ~10^6 stars by the end of 2012 and measures their radial velocities, atmospheric parameters and chemical abundances. The project makes use of the UK Schmidt telescope at Australian Astronomical Observatory (AAO) in Siding Spring, Australia, equipped with the multiobject spectrograph 6dF. To date, RAVE collected and measured more than 450,000 spectra. The precision of the chemical abundance estimations depends on the reliability of the atomic and atmosphere parameters adopted (in particular the oscillator strengths of the absorption lines and the effective temperature, gravity, and metallicity of the stars measured). Therefore we first identified 604 absorption lines in the RAVE wavelength range and refined their oscillator strengths with an inverse spectral analysis. Then, we improved the RAVE stellar parameters by modifying the RAVE pipeline and the spectral library the pipeline rely on. The modifications removed some systematic errors in stellar parameters discovered during this work. To obtain chemical abundances, we developed two different processing pipelines. Both of them perform chemical abundances measurements by assuming stellar atmospheres in Local Thermodynamic Equilibrium (LTE). The first one determines elements abundances from equivalent widths of absorption lines. Since this pipeline showed poor sensibility on abundances relative to iron, it has been superseded. The second one exploits the chi^2 minimization technique between observed and model spectra. Thanks to its precision, it has been adopted for the creation of the RAVE chemical catalogue. This pipeline provides abundances with uncertains of about ~0.2dex for spectra with signal-to-noise ratio S/N>40 and ~0.3dex for spectra with 20>S/N>40. For this work, the pipeline measured chemical abundances up to 7 elements for 217,358 RAVE stars. With these data we investigated the chemical gradients along the Galactic radius of the Milky Way. We found that stars with low vertical velocities |W| (which stay close to the Galactic plane) show an iron abundance gradient in agreement with previous works (~-0.07$ dex kpc^-1) whereas stars with larger |W| which are able to reach larger heights above the Galactic plane, show progressively flatter gradients. The gradients of the other elements follow the same trend. This suggests that an efficient radial mixing acts in the Galaxy or that the thick disk formed from homogeneous interstellar matter. In particular, we found hundreds of stars which can be kinetically classified as thick disk stars exhibiting a chemical composition typical of the thin disk. A few stars of this kind have already been detected by other authors, and their origin is still not clear. One possibility is that they are thin disk stars kinematically heated, and then underwent an efficient radial mixing process which blurred (and so flattened) the gradient. Alternatively they may be a transition population" which represents an evolutionary bridge between thin and thick disk. Our analysis shows that the two explanations are not mutually exclusive. Future follow-up high resolution spectroscopic observations will clarify their role in the Galactic disk evolution.
The Milky Way is only one out of billions of galaxies in the universe. However, it is a special galaxy because it allows to explore the main mechanisms involved in its evolution and formation history by unpicking the system star-by-star. Especially, the chemical fingerprints of its stars provide clues and evidence of past events in the Galaxy’s lifetime. These information help not only to decipher the current structure and building blocks of the Milky Way, but to learn more about the general formation process of galaxies.
In the past decade a multitude of stellar spectroscopic Galactic surveys have scanned millions of stars far beyond the rim of the solar neighbourhood. The obtained spectroscopic information provide unprecedented insights to the chemo-dynamics of the Milky Way. In addition analytic models and numerical simulations of the Milky Way provide necessary descriptions and predictions suited for comparison with observations in order to decode the physical properties that underlie the complex system of the Galaxy.
In the thesis various approaches are taken to connect modern theoretical modelling of galaxy formation and evolution with observations from Galactic stellar surveys. With its focus on the chemo-kinematics of the Galactic disk this work aims to determine new observational constraints on the formation of the Milky Way providing also proper comparisons with two different models. These are the population synthesis model TRILEGAL based on analytical distribution functions, which aims to simulate the number and distribution of stars in the Milky Way and its different components, and a hybrid model (MCM) that combines an N-body simulation of a Milky Way like galaxy in the cosmological framework with a semi-analytic chemical evolution model for the Milky Way. The major observational data sets in use come from two surveys, namely the “Radial Velocity Experiment” (RAVE) and the “Sloan Extension for Galactic Understanding and Exploration” (SEGUE).
In the first approach the chemo-kinematic properties of the thin and thick disk of the Galaxy as traced by a selection of about 20000 SEGUE G-dwarf stars are directly compared to the predictions by the MCM model. As a necessary condition for this, SEGUE's selection function and its survey volume are evaluated in detail to correct the spectroscopic observations for their survey specific selection biases. Also, based on a Bayesian method spectro-photometric distances with uncertainties below 15% are computed for the selection of SEGUE G-dwarfs that are studied up to a distance of 3 kpc from the Sun.
For the second approach two synthetic versions of the SEGUE survey are generated based on the above models. The obtained synthetic stellar catalogues are then used to create mock samples best resembling the compiled sample of observed SEGUE G-dwarfs. Generally, mock samples are not only ideal to compare predictions from various models. They also allow validation of the models' quality and improvement as with this work could be especially achieved for TRILEGAL. While TRILEGAL reproduces the statistical properties of the thin and thick disk as seen in the observations, the MCM model has shown to be more suitable in reproducing many chemo-kinematic correlations as revealed by the SEGUE stars. However, evidence has been found that the MCM model may be missing a stellar component with the properties of the thick disk that the observations clearly show. While the SEGUE stars do indicate a thin-thick dichotomy of the stellar Galactic disk in agreement with other spectroscopic stellar studies, no sign for a distinct metal-poor disk is seen in the MCM model.
Usually stellar spectroscopic surveys are limited to a certain volume around the Sun covering different regions of the Galaxy’s disk. This often prevents to obtain a global view on the chemo-dynamics of the Galactic disk. Hence, a suitable combination of stellar samples from independent surveys is not only useful for the verification of results but it also helps to complete the picture of the Milky Way. Therefore, the thesis closes with a comparison of the SEGUE G-dwarfs and a sample of RAVE giants. The comparison reveals that the chemo-kinematic relations agree in disk regions where the samples of both surveys show a similar number of stars. For those parts of the survey volumes where one of the surveys lacks statistics they beautifully complement each other. This demonstrates that the comparison of theoretical models on the one side, and the combined observational data gathered by multiple surveys on the other side, are key ingredients to understand and disentangle the structure and formation history of the Milky Way.
In the living cell, the organization of the complex internal structure relies to a large extent on molecular motors. Molecular motors are proteins that are able to convert chemical energy from the hydrolysis of adenosine triphosphate (ATP) into mechanical work. Being about 10 to 100 nanometers in size, the molecules act on a length scale, for which thermal collisions have a considerable impact onto their motion. In this way, they constitute paradigmatic examples of thermodynamic machines out of equilibrium. This study develops a theoretical description for the energy conversion by the molecular motor myosin V, using many different aspects of theoretical physics. Myosin V has been studied extensively in both bulk and single molecule experiments. Its stepping velocity has been characterized as a function of external control parameters such as nucleotide concentration and applied forces. In addition, numerous kinetic rates involved in the enzymatic reaction of the molecule have been determined. For forces that exceed the stall force of the motor, myosin V exhibits a 'ratcheting' behaviour: For loads in the direction of forward stepping, the velocity depends on the concentration of ATP, while for backward loads there is no such influence. Based on the chemical states of the motor, we construct a general network theory that incorporates experimental observations about the stepping behaviour of myosin V. The motor's motion is captured through the network description supplemented by a Markov process to describe the motor dynamics. This approach has the advantage of directly addressing the chemical kinetics of the molecule, and treating the mechanical and chemical processes on equal grounds. We utilize constraints arising from nonequilibrium thermodynamics to determine motor parameters and demonstrate that the motor behaviour is governed by several chemomechanical motor cycles. In addition, we investigate the functional dependence of stepping rates on force by deducing the motor's response to external loads via an appropriate Fokker-Planck equation. For substall forces, the dominant pathway of the motor network is profoundly different from the one for superstall forces, which leads to a stepping behaviour that is in agreement with the experimental observations. The extension of our analysis to Markov processes with absorbing boundaries allows for the calculation of the motor's dwell time distributions. These reveal aspects of the coordination of the motor's heads and contain direct information about the backsteps of the motor. Our theory provides a unified description for the myosin V motor as studied in single motor experiments.
Bacterial chemotaxis-a fundamental example of directional navigation in the living world-is key to many biological processes, including the spreading of bacterial infections. Many bacterial species were recently reported to exhibit several distinct swimming modes-the flagella may, for example, push the cell body or wrap around it. How do the different run modes shape the chemotaxis strategy of a multimode swimmer? Here, we investigate chemotactic motion of the soil bacterium Pseudomonas putida as a model organism. By simultaneously tracking the position of the cell body and the configuration of its flagella, we demonstrate that individual run modes show different chemotactic responses in nutrition gradients and, thus, constitute distinct behavioral states. On the basis of an active particle model, we demonstrate that switching between multiple run states that differ in their speed and responsiveness provides the basis for robust and efficient chemotaxis in complex natural habitats.
We present electrical impedance measurements of amoeboid cells on microelectrodes. The model organism Dictyostelium discoideum shows under starvation conditions a transition to collective behavior when chemotactic cells collect in multicellular aggregates. We show how impedance recordings give a precise picture of the stages of aggregation by tracing the dynamics of cell-substrate adhesion. Furthermore, we present for the first time systematic single cell measurements of wild type cells and four mutant strains that differ in their substrate adhesion strength. We recorded the projected cell area by time lapse microscopy and found a correlation between quasi-periodic oscillations in the kinetics of the projected area - the cell shape oscillation - and the long-term trend in the impedance signal. Typically, amoeboid motility advances via a cycle of membrane protrusion, substrate adhesion, traction of the cell body and tail retraction. This motility cycle results in the quasi-periodic oscillations of the projected cell area and the impedance. In all cell lines measured, similar periods were observed for this cycle, despite the differences in attachment strength. We observed that cell-substrate attachment strength strongly affects the impedance in that the deviations from mean (the magnitude of fluctuations) are enhanced in cells that effectively transmit forces, generated by the cytoskeleton, to the substrate. For example, in talA- cells, which lack the actin anchoring protein talin, the fluctuations are strongly reduced. Single cell force spectroscopy and results from a detachment assay, where adhesion is measured by exposing cells to shear stress, confirm that the magnitude of impedance fluctuations is a correct measure for the strength of substrate adhesion. Finally, we also worked on the integration of cell-substrate impedance sensors into microfluidic devices. A chip-based electrical chemotaxis assay is designed which measures the speed of chemotactic cells migrating over microelectrodes along a chemical concentration gradient.
We consider synchronization properties of arrays of spin-torque nano-oscillators coupled via an RC load. We show that while the fully synchronized state of identical oscillators may be locally stable in some parameter range, this synchrony is not globally attracting. Instead, regimes of different levels of compositional complexity are observed. These include chimera states (a part of the array forms a cluster while other units are desynchronized), clustered chimeras (several clusters plus desynchronized oscillators), cluster state (all oscillators form several clusters), and partial synchronization (no clusters but a nonvanishing mean field). Dynamically, these states are also complex, demonstrating irregular and close to quasiperiodic modulation. Remarkably, when heterogeneity of spin-torque oscillators is taken into account, dynamical complexity even increases: close to the onset of a macroscopic mean field, the dynamics of this field is rather irregular.
Our Solar system contains a large amount of dust, containing valuable information about our close cosmic environment. If created in a planet's system, the particles stay predominantly in its vicinity and can form extended dust envelopes, tori or rings around them. A fascinating example of these complexes are Saturnian rings containing a wide range of particles sizes from house-size objects in the main rings up to micron-sized grains constituting the E ring. Other example are ring systems in general, containing a large fraction of dust or also the putative dust-tori surrounding the planet Mars. The dynamical life'' of such circumplanetary dust populations is the main subject of our study. In this thesis a general model of creation, dynamics and death'' of circumplanetary dust is developed. Endogenic and exogenic processes creating dust at atmosphereless bodies are presented. Then, we describe the main forces influencing the particle dynamics and study dynamical responses induced by stochastic fluctuations. In order to estimate the properties of steady-state population of considered dust complex, the grain mean lifetime as a result of a balance of dust creation, life'' and loss mechanisms is determined. The latter strongly depends on the surrounding environment, the particle properties and its dynamical history. The presented model can be readily applied to study any circumplanetary dust complex. As an example we study dynamics of two dust populations in the Solar system. First we explore the dynamics of particles, ejected from Martian moon Deimos by impacts of micrometeoroids, which should form a putative tori along the orbit of the moon. The long-term influence of indirect component of radiation pressure, the Poynting-Robertson drag gives rise in significant change of torus geometry. Furthermore, the action of radiation pressure on rotating non-spherical dust particles results in stochastic dispersion of initially confined ensemble of particles, which causes decrease of particle number densities and corresponding optical depth of the torus. Second, we investigate the dust dynamics in the vicinity of Saturnian moon Enceladus. During three flybys of the Cassini spacecraft with Enceladus, the on-board dust detector registered a micron-sized dust population around the moon. Surprisingly, the peak of the measured impact rate occurred 1 minute before the closest approach of the spacecraft to the moon. This asymmetry of the measured rate can be associated with locally enhanced dust production near Enceladus south pole. Other Cassini instruments also detected evidence of geophysical activity in the south polar region of the moon: high surface temperature and extended plumes of gas and dust leaving the surface. Comparison of our results with this in situ measurements reveals that the south polar ejecta may provide the dominant source of particles sustaining the Saturn's E ring.
As national efforts to reduce CO2 emissions intensify, policy-makers need increasingly specific, subnational information about the sources of CO2 and the potential reductions and economic implications of different possible policies. This is particularly true in China, a large and economically diverse country that has rapidly industrialized and urbanized and that has pledged under the Paris Agreement that its emissions will peak by 2030. We present new, city level estimates of CO2 emissions for 182 Chinese cities, decomposed into 17 different fossil fuels, 46 socioeconomic sectors, and 7 industrial processes. We find that more affluent cities have systematically lower emissions per unit of gross domestic product (GDP), supported by imports from less affluent, industrial cities located nearby. In turn, clusters of industrial cities are supported by nearby centers of coal or oil extraction. Whereas policies directly targeting manufacturing and electric power infrastructure would drastically undermine the GDP of industrial cities, consumption based policies might allow emission reductions to be subsidized by those with greater ability to pay. In particular, sector based analysis of each city suggests that technological improvements could be a practical and effective means of reducing emissions while maintaining growth and the current economic structure and energy system. We explore city-level emission reductions under three scenarios of technological progress to show that substantial reductions (up to 31%) are possible by updating a disproportionately small fraction of existing infrastructure.
Planets outside our solar system, so-called "exoplanets", can be detected with different methods, and currently more than 5000 exoplanets have been confirmed, according to NASA Exoplanet Archive. One major highlight of the studies on exoplanets in the past twenty years is the characterization of their atmospheres usingtransmission spectroscopy as the exoplanet transits. However, this characterization is a challenging process and sometimes there are reported discrepancies in the literature regarding the atmosphere of the same exoplanet. One potential reason for the observed atmospheric inconsistencies is called impact parameter degeneracy, and it is highly driven by the limb darkening effect of the host star. A brief introductionto those topics in presented in chapter 1, while the motivation and objectives of thiswork are described in chapter 2.The first goal is to clarify the origin of the transmission spectrum, which is anindicator of an exoplanet’s atmosphere; whether it is real or influenced by the impactparameter degeneracy. A second goal is to determine whether photometry from space using the Transiting Exoplanet Survey Satellite (TESS), could improve on the major parameters, which are responsible for the aforementioned degeneracy, of known exoplanetary systems. Three individual projects were conducted in order toaddress those goals. The three manuscripts are presented, in short, in the manuscriptoverview in chapter 3.More specifically, in chapter 4, the first manuscript is presented, which is an ex-tended investigation on the impact parameter degeneracy and its application onsynthetic transmission spectra. Evidently, the limb darkening of the host star isan important driver for this effect. It keeps the degeneracy persisting through different groups of exoplanets, based on the uncertainty of their impact parameter and on the type of their host star. The second goal, was addressed in the second and third manuscripts (chapter 5 and chapter 6 respectively). Using observationsfrom the TESS mission, two samples of exoplanets were studied; 10 transiting inflated hot-Jupiters and 43 transiting grazing systems. Potentially, the refinement or confirmation of their major system parameters’ measurements can assist in solving current or future discrepancies regarding their atmospheric characterization.In chapter 7 the conclusions of this work are discussed, while in chapter 8 itis proposed how TESS’s measurements can be able to discern between erroneousinterpretations of transmission spectra, especially on systems where the impact parameter degeneracy is likely not applicable.