Refine
Has Fulltext
- no (6)
Year of publication
- 2005 (6) (remove)
Document Type
- Article (6)
Language
- English (6)
Is part of the Bibliography
- yes (6)
Institute
Fe K-edge X-ray absorption near edge structure (XANES) and Mossbauer spectra were collected on synthetic glasses of basaltic composition and of glasses on the sodium oxide-silica binary to establish a relation between the pre- edge of the XANES at the K-edge and the Fe oxidation state of depolymerised glasses. Charges of sample material were equilibrated at ambient pressure, superliquidus temperatures and oxygen fugacities that were varied over a range of about 15 orders of magnitude. Most experiments were carried out in gas-flow furnaces, either with pure oxygen, air, or different CO/CO2 mixtures. For the most reduced conditions, the samples charges were enclosed together with a pellet of the IQF oxygen buffer in an evacuated silica glass ampoule. Fe3+/Sigma Fe x 100 of the samples determined by Mossbauer spectroscopy range between 0% and 100%. Position and intensity of the pre-edge centroid position vary strongly depending on the Fe oxidation state. The pre-edge centroid position and the Fe oxidation state determined by Mossbauer spectroscopy are nonlinearly related and have been fitted by a quadratic polynomial. Alternatively, the ratio of intensities measured at positions sensitive to Fe2+ and Fe3+, respectively, provides an even more sensitive method. Pre- edge intensities of the sample suite indicate average Fe co-ordination between 4 and 6 for all samples regardless of oxidation state. A potential application of the calibration given here opens the possibility of determining Fe oxidation state in glasses of similar compositions with high spatial resolution by use of a Micro-XANES setup (e.g., glass inclusions in natural minerals). (c) 2004 Elsevier B.V. All rights reserved
This paper presents some results concerning the size-controlled hydroxyapatite nanoparticles obtained in aqueous media in a biopolymer matrix from soluble precursors salts. Taking the inspiration from nature, where composite materials made of a polymer matrix and inorganic fillers are often found, e.g. bone, shell of crustaceans, shell of eggs, etc., the feasibility on making composite materials containing chitosan and nanosized hydroxyapatite was investigated. A stepwise co-precipitation approach was used to obtain different types of composites by means of different ratio between components. The synthesis of hydroxyapatite was carried out in the chitosan matrix from calcium chloride and sodium dihydrogenphosphate in alkaline solutions at moderate pH of 10-11 for 24 h. Our research is focused on studying and understanding the structure of this class of composites, aiming at the development of novel materials, controlled at the nanolevel scale. The X-ray diffraction technique was employed in order to study the kinetic of hydroxyapatite formation in the chitosan matrix as well as to determine the HAp crystallite sizes in the composite samples. The hydroxyapatite synthesized using this route was found to be nano-sized (15-50nm). Moreover, applying an original approach to analyze the (002) XRD diffraction peak profile of hydroxyapatite by using a sum of two Gauss functions, the bimodal distribution of nanosized hydroxyapatite within the chitosan matrix was revealed. Two types of size distribution domains such as cluster-like (between 200 and 400 nm), which are the habitat of "small" hydroxyapatite nanocrystallites and scattered-like, which are the habitat of "large" hydroxyapatite nanocrystallites was probed by TEM and CSLM. The structural features of composites suggest that self-assembly processes might be involved. The composites contain nanosized hydroxyapatite with structural features close to those of biological apatites that make them attractive for bone tissue engineering applications. (c) 2005 Elsevier Ltd. All rights reserved
The effect of water activity on the oxidation and structural state of Fe in a ferro-basaltic melt
(2005)
Experimental investigations have been performed at T = 1200 degrees C, P = 200 MPa and fH(2) corresponding to H2O-MnO-Mn3O4 and H2O-QFM redox buffers to study the effect of H2O activity on the oxidation and structural state of Fe in an iron-rich basaltic melt. The analysis of Mossbauer and Fe K-edge X-ray absorption nearedge structure (XANES) spectra of the quenched hydrous ferrobasaltic glasses shows that the Fe3+/Sigma Fe ratio of the glass is directly related to aH(2)O in a H-2-buffered system and, consequently, to the prevailing oxygen fugacity (through the reaction of water dissociation H2O <-> H-2 + 1/2 O-2). However, water as a chemical component of the silicate melt has an indistinguishable effect on the redox state of iron at studied conditions. The experimentally obtained relationship between fO(2) and Fe3+/Fe2+ in the hydrous ferrobasaltic melt can be adequately predicted in the investigated range by the existing empiric and thermodynamic models. The ratio of ferric and ferrous Fe is proportional to the oxygen fugacity to the power of similar to 0.25 which agrees with the theoretical value from the stoichiometry of the Fe redox reaction (FeO + 1/4 O-2 = FeO1.5). The mean centre shifts for Fe2+ and Fe3+ absorption doublets in Mossbauer spectra show little change with increasing Fe3+/Sigma Fe, suggesting no significant change in the type of iron coordination. Similarly, XANES preedge spectra indicate a mixed (C3h, Td, and Oh, i.e., 5-, 4-, and sixfold) coordination of Fe in hydrous basaltic glasses. Copyright (c) 2005 Elsevier Ltd
In silicate glasses and melts, water acts according to two main processes. First, it can be dissolved in high temperature/high pressure melts. Second, it constitutes a weathering agent on the glass surface. A number of in-situ x- ray absorption fine structure (XAFS) studies for Fe, Ni, Zr, Th and U show that the more charged cations (Zr, Nb, Mo, Ta, Sn, Th and U) are little affected by the presence of dissolved water in the melt. In contrast, divalent iron and nickel are highly sensitive to the presence of water, which enhance nucleation processes, for example, of phyllosilicates at the angstrom-scale. Such information provides additional constraints on the role of water deep in the Earth, particularly in magmatology. By contrast, the weathering of glass surfaces by water can be studied from a durability perspective. Experimental weathering experiments Of nuclear waste glasses performed in the laboratory show a variety of surface enrichments (carbon, chlorine, alkalis, iron) after exposure to atmospheric fluids and moisture. Mn-, and Fe-surface enrichments of analogous glasses of the XIVth century are related to the formation of Mn and Fe oxy/ hydroxides on the surface. The impact on the glass darkening is considered in terms of urban pollution and mass tourism
Fe in magma : an overview
(2005)
The strong influence of physical conditions during magma formation on Fe equilibria offers a large variety of possibilities to deduce these conditions from Fe-bearing phases and phase assemblages found in magmatic rocks. Conditions of magma genesis and their evolution are of major interest for the understanding of volcanic eruptions. A brief overview on the most common methods used is given together with potential problems and limitations. Fe equilibria are not only sensitive to changes in intensive parameters (especially T and fO(2)) and extensive parameters like composition also have major effects, so that direct application of experimentally calibrated equilibria to natural systems is not always possible. Best estimates for pre-eruptive conditions are certainly achieved by studies that relate field observations directly to experimental observations for the composition of interest using as many constraints as possible (phase stability relations, Fe-Ti oxides, Fe partitioning between phases, Fe oxidation state in glass etc.). Local structural environment of Fe in silicate melts is an important parameter that is needed to understand the relationship between melt transport properties and melt structure. Assignment of Fe co-ordination and its relationship to the oxidation state seems not to be straightforward. In addition, there is considerable evidence that the co- ordination of Fe in glass differs from that in the melt, which has to be taken into account when linking melt structure to physical properties of silicate melts at T and P.