Refine
Year of publication
- 2021 (26) (remove)
Document Type
- Doctoral Thesis (26) (remove)
Is part of the Bibliography
- yes (26)
Keywords
- Alpen (2)
- Alps (2)
- Argentina (2)
- Argentinien (2)
- Rheologie (2)
- Abbaufrontkartierung (1)
- Abbildende Spektroskopie (1)
- African climate (1)
- Afrikanisches Klima (1)
- AlpArray (1)
Institute
- Institut für Geowissenschaften (26) (remove)
The Central Andes region in South America is characterized by a complex and heterogeneous deformation system. Recorded seismic activity and mapped neotectonic structures indicate that most of the intraplate deformation is located along the margins of the orogen, in the transitions to the foreland and the forearc. Furthermore, the actively deforming provinces of the foreland exhibit distinct deformation styles that vary along strike, as well as characteristic distributions of seismicity with depth. The style of deformation transitions from thin-skinned in the north to thick-skinned in the south, and the thickness of the seismogenic layer increases to the south. Based on geological/geophysical observations and numerical modelling, the most commonly invoked causes for the observed heterogeneity are the variations in sediment thickness and composition, the presence of inherited structures, and changes in the dip of the subducting Nazca plate. However, there are still no comprehensive investigations on the relationship between the lithospheric composition of the Central Andes, its rheological state and the observed deformation processes. The central aim of this dissertation is therefore to explore the link between the nature of the lithosphere in the region and the location of active deformation. The study of the lithospheric composition by means of independent-data integration establishes a strong base to assess the thermal and rheological state of the Central Andes and its adjacent lowlands, which alternatively provide new foundations to understand the complex deformation of the region. In this line, the general workflow of the dissertation consists in the construction of a 3D data-derived and gravity-constrained density model of the Central Andean lithosphere, followed by the simulation of the steady-state conductive thermal field and the calculation of strength distribution. Additionally, the dynamic response of the orogen-foreland system to intraplate compression is evaluated by means of 3D geodynamic modelling.
The results of the modelling approach suggest that the inherited heterogeneous composition of the lithosphere controls the present-day thermal and rheological state of the Central Andes, which in turn influence the location and depth of active deformation processes. Most of the seismic activity and neo--tectonic structures are spatially correlated to regions of modelled high strength gradients, in the transition from the felsic, hot and weak orogenic lithosphere to the more mafic, cooler and stronger lithosphere beneath the forearc and the foreland. Moreover, the results of the dynamic simulation show a strong localization of deviatoric strain rate second invariants in the same region suggesting that shortening is accommodated at the transition zones between weak and strong domains. The vertical distribution of seismic activity appears to be influenced by the rheological state of the lithosphere as well. The depth at which the frequency distribution of hypocenters starts to decrease in the different morphotectonic units correlates with the position of the modelled brittle-ductile transitions; accordingly, a fraction of the seismic activity is located within the ductile part of the crust. An exhaustive analysis shows that practically all the seismicity in the region is restricted above the 600°C isotherm, in coincidence with the upper temperature limit for brittle behavior of olivine. Therefore, the occurrence of earthquakes below the modelled brittle-ductile could be explained by the presence of strong residual mafic rocks from past tectonic events. Another potential cause of deep earthquakes is the existence of inherited shear zones in which brittle behavior is favored through a decrease in the friction coefficient. This hypothesis is particularly suitable for the broken foreland provinces of the Santa Barbara System and the Pampean Ranges, where geological studies indicate successive reactivation of structures through time. Particularly in the Santa Barbara System, the results indicate that both mafic rocks and a reduction in friction are required to account for the observed deep seismic events.
We developed an orbital tuned age model for the composite Chew Bahir sediment core, obtained from the Chew Bahir basin (CHB), southern Ethiopia. To account for the effects of sedimentation rate changes on the spectral expression of the orbital cycles we developed a new method: the Multi-band Wavelet Age modeling technique (MUBAWA). By using a Continuous Wavelet Transformation, we were able to track frequency shifts that resulted from changing sedimentation rates and thus calculated tuned age model encompassing the last 620 kyrs. The results show a good agreement with the directly dated age model that is available from the dating of volcanic ashes. Then we used the XRF data from CHB and developed a new and robust humid-arid index of east African climate during the last 620 kyrs. To disentangle the relationship of the selected elements we performed a principal component analysis (PCA). In a following step we applied a continuous wavelet transformation on the PC1, using the directly dated age model. The resulting wavelet power spectrum, unlike a normal power spectrum, displays the occurrence of cycles/frequencies in time. The results highlight that the precession cycles are most dominantly expressed under the 400 kyrs eccentricity maximum whereas weakly expressed during eccentricity minimum. This suggests that insolation is a key driver of the climatic variability observed at CHB throughout the last 620 kyrs. In addition, the prevalence of half-precession and obliquity signals was documented. The latter is attributed to the inter-tropical insolation gradient and not interpreted as an imprint of high latitudes forcing on climatic changes in the tropics. In addition, a windowed analysis of variability was used to detect changes in variance over time and showed that strong climate variability occurred especially along the transition from a dominant insolation-controlled humid climate background state towards a predominantly dry and less-insolation controlled climate. The last chapter dealt with non-linear aspects of climate changes represented by the sediments of the CHB. We use recurrence quantification analysis to detect non-linear changes within the potassium concentration of Chew Bahir sediment cores during the last 620 kyrs. The concentration of potassium in the sediments of the lake is subject to geochemical processes related to the evaporation rate of the lake water at the time of deposition. Based on recurrence analysis, two types of variabilities could be distinguished. Type 1 represents slow variations within the precession period bandwidth of 20 kyrs and a tendency towards extreme climatic events whereas type 2 represents fast, highly variable climatic transitions between wet and dry climate states. While type 1 variability is linked to eccentricity maxima, type 2 variability occurs during the 400 kyrs eccentricity minimum. The climate history presented here shows that during high eccentricity a strongly insolation-driven climate system prevailed, whereas during low eccentricity the climate was more strongly affected by short-term variability changes. The short-term environmental changes, reflected in the increased variability might have influenced the evolution, technological advances and expansion of early modern humans who lived in this region. In the Olorgesaille Basin the temporal changes in the occurrence of stone tools, which bracket the transition from Acheulean to Middle Stone Age (MSA) technologies at between 499–320 kyrs, could potentially correlate to the marked transition from a rather stable climate with less variability to a climate with increased variability in the CHB. We conclude that populations of early anatomically modern humans are more likely to have experienced climatic stress during episodes of low eccentricity, associated with dry and high variability climate conditions, which may have led to technological innovation, such as the transition from the Acheulean to the Middle Stone Age.
The Arctic environments constitute rich and dynamic ecosystems, dominated by microorganisms extremely well adapted to survive and function under severe conditions. A range of physiological adaptations allow the microbiota in these habitats to withstand low temperatures, low water and nutrient availability, high levels of UV radiation, etc. In addition, other adaptations of clear competitive nature are directed at not only surviving but thriving in these environments, by disrupting the metabolism of neighboring cells and affecting intermicrobial communication. Since Arctic microbes are bioindicators which amplify climate alterations in the environment, the Arctic region presents the opportunity to study local microbiota and carry out research about interesting, potentially virulent phenotypes that could be dispersed into other habitats around the globe as a consequence of accelerating climate change. In this context, exploration of Arctic habitats as well as descriptions of the microbes inhabiting them are abundant but microbial competitive strategies commonly associated with virulence and pathogens are rarely reported. In this project, environmental samples from the Arctic region were collected and microorganisms (bacteria and fungi) were isolated. The clinical relevance of these microorganisms was assessed by observing the following virulence markers: ability to grow at a range of temperatures, expression of antimicrobial resistance and production of hemolysins. The aim of this project is to determine the frequency and relevance of these characteristics in an effort to understand microbial adaptations in habitats threatened by climate change. The isolates obtained and described here were able to grow at a range of temperatures, in some cases more than 30 °C higher than their original isolation temperature. A considerable number of them consistently expressed compounds capable of lysing sheep and bovine erythrocytes on blood agar at different incubation temperatures. Ethanolic extracts of these bacteria were able to cause rapid and complete lysis of erythrocyte suspensions and might even be hemolytic when assayed on human blood. In silico analyses showed a variety of resistance elements, some of them novel, against natural and synthetic antimicrobial compounds. In vitro experiments against a number of antimicrobial compounds showed resistance phenotypes belonging to wild-type populations and some non-wild type which clearly denote human influence in the acquisition of antimicrobial resistance. The results of this project demonstrate the presence of virulence-associated factors expressed by microorganisms of natural, non-clinical environments. This study contains some of the first reports, to the best of our knowledge, of hemolytic microbes isolated from the Arctic region. In addition, it provides additional information about the presence and expression of intrinsic and acquired antimicrobial resistance in environmental isolates, contributing to the understanding of the evolution of relevant pathogenic species and opportunistic pathogens. Finally, this study highlights some of the potential risks associated with changes in the polar regions (habitat melting and destruction, ecosystem transition and re-colonization) as important indirect consequences of global warming and altered climatic conditions around the planet.
This work develops hybrid methods of imaging spectroscopy for open pit mining and examines their feasibility compared with state-of-the-art. The material distribution within a mine face differs in the small scale and within daily assigned extraction segments. These changes can be relevant to subsequent processing steps but are not always visually identifiable prior to the extraction. Misclassifications that cause false allocations of extracted material need to be minimized in order to reduce energy-intensive material re-handling. The use of imaging spectroscopy aspires to the allocation of relevant deposit-specific materials before extraction, and allows for efficient material handling after extraction. The aim of this work is the parameterization of imaging spectroscopy for pit mining applications and the development and evaluation of a workflow for a mine face, ground- based, spectral characterization. In this work, an application-based sensor adaptation is proposed. The sensor complexity is reduced by down-sampling the spectral resolution of the system based on the samples’ spectral characteristics. This was achieved by the evaluation of existing hyperspectral outcrop analysis approaches based on laboratory sample scans from the iron quadrangle in Minas Gerais, Brazil and by the development of a spectral mine face monitoring workflow which was tested for both an operating and an inactive open pit copper mine in the Republic of Cyprus.
The workflow presented here is applied to three regional data sets: 1) Iron ore samples from Brazil, (laboratory); 2) Samples and hyperspectral mine face imagery from the copper-gold-pyrite mine Apliki, Republic of Cyprus (laboratory and mine face data); and 3) Samples and hyperspectral mine face imagery from the copper-gold-pyrite deposit Three Hills, Republic of Cyprus (laboratory and mine face data). The hyperspectral laboratory dataset of fifteen Brazilian iron ore samples was used to evaluate different analysis methods and different sensor models. Nineteen commonly used methods to analyze and map hyperspectral data were compared regarding the methods’ resulting data products and the accuracy of the mapping and the analysis computation time. Four of the evaluated methods were determined for subsequent analyses to determine the best-performing algorithms: The spectral angle mapper (SAM), a support vector machine algorithm (SVM), the binary feature fitting algorithm (BFF) and the EnMap geological mapper (EnGeoMap). Next, commercially available imaging spectroscopy sensors were evaluated for their usability in open pit mining conditions. Step-wise downsampling of the data - the reduction of the number of bands with an increase of each band’s bandwidth - was performed to investigate the possible simplification and ruggedization of a sensor without a quality fall-off of the mapping results. The impact of the atmosphere visible in the spectrum between 1300–2010nm was reduced by excluding the spectral range from the data for mapping. This tested the feasibility of the method under realistic open pit data conditions. Thirteen datasets based on the different, downsampled sensors were analyzed with the four predetermined methods. The optimum sensor for spectral mine face material distinction was determined as a VNIR-SWIR sensor with 40nm bandwidths in the VNIR and 15nm bandwidths in the SWIR spectral range and excluding the atmospherically impacted bands. The Apliki mine sample dataset was used for the application of the found optimal analyses and sensors. Thirty-six samples were analyzed geochemically and mineralogically. The sample spectra were compiled to two spectral libraries, both distinguishing between seven different geochemical-spectral clusters. The reflectance dataset was downsampled to five different sensors. The five different datasets were mapped with the SAM, BFF and SVM method achieving mapping accuracies of 85-72%, 85-76% and 57-46% respectively. One mine face scan of Apliki was used for the application of the developed workflow. The mapping results were validated against the geochemistry and mineralogy of thirty-six documented field sampling points and a zonation map of the mine face which is based on sixty-six samples and field mapping. The mine face was analyzed with SAM and BFF. The analysis maps were visualized on top of a Structure-from-Motion derived 3D model of the open pit. The mapped geological units and zones correlate well with the expected zonation of the mine face. The third set of hyperspectral imagery from Three Hills was available for applying the fully-developed workflow. Geochemical sample analyses and laboratory spectral data of fifteen different samples from the Three Hills mine, Republic of Cyprus, were used to analyse a downsampled mine face scan of the open pit. Here, areas of low, medium and high ore content were identified.
The developed workflow is successfully applied to the open pit mines Apliki and Three Hills and the spectral maps reflect the prevailing geological conditions. This work leads through the acquisition, preparation and processing of imaging spectroscopy data, the optimum choice of analysis methodology, and the utilization of simplified, robust sensors that meet the requirements of open pit mining conditions. It accentuates the importance of a site-specific and deposit-specific spectral library for the mine face analysis and underlines the need for geological and spectral analysis experts to successfully implement imaging spectroscopy in the field of open pit mining.
By regulating the concentration of carbon in our atmosphere, the global carbon cycle drives changes in our planet’s climate and habitability. Earth surface processes play a central, yet insufficiently constrained role in regulating fluxes of carbon between terrestrial reservoirs and the atmosphere. River systems drive global biogeochemical cycles by redistributing significant masses of carbon across the landscape. During fluvial transit, the balance between carbon oxidation and preservation determines whether this mass redistribution is a net atmospheric CO2 source or sink. Existing models for fluvial carbon transport fail to integrate the effects of sediment routing processes, resulting in large uncertainties in fluvial carbon fluxes to the oceans.
In this Ph.D. dissertation, I address this knowledge gap through three studies that focus on the timescale and routing pathways of fluvial mass transfer and show their effect on the composition and fluxes of organic carbon exported by rivers. The hypotheses posed in these three studies were tested in an analog lowland alluvial river system – the Rio Bermejo in Argentina. The Rio Bermejo annually exports more than 100 Mt of sediment and organic matter from the central Andes, and transports this material nearly 1300 km downstream across the lowland basin without influence from tributaries, allowing me to isolate the effects of geomorphic processes on fluvial organic carbon cycling. These studies focus primarily on the geochemical composition of suspended sediment collected from river depth profiles along the length of the Rio Bermejo.
In Chapter 3, I aimed to determine the mean fluvial sediment transit time for the Rio Bermejo and evaluate the geomorphic processes that regulate the rate of downstream sediment transfer. I developed a framework to use meteoric cosmogenic 10Be (10Bem) as a chronometer to track the duration of sediment transit from the mountain front downstream along the ~1300 km channel of the Rio Bermejo. I measured 10Bem concentrations in suspended sediment sampled from depth profiles, and found a 230% increase along the fluvial transit pathway. I applied a simple model for the time-dependent accumulation of 10Bem on the floodplain to estimate a mean sediment transit time of 8.5±2.2 kyr. Furthermore, I show that sediment transit velocity is influenced by lateral migration rate and channel morphodynamics. This approach to measuring sediment transit time is much more precise than other methods previously used and shows promise for future applications.
In Chapter 4, I aimed to quantify the effects of hydrodynamic sorting on the composition and quantity of particulate organic carbon (POC) export transported by lowland rivers. I first used scanning electron miscroscopy (SEM) coupled with nanoscale secondary ion mass spectrometry (NanoSIMS) analyses to show that the Bermejo transports two principal types of POC: 1) mineral-bound organic carbon associated with <4 µm, platy grains, and 2) coarse discrete organic particles. Using n-alkane stable isotope data and particle shape analysis, I showed that these two carbon pools are vertically sorted in the water column, due to differences in particle settling velocity. This vertical sorting may drive modern POC to be transported efficiently from source-to-sink, driving efficient CO2 drawdown. Simultaneously, vertical sorting may drive degraded, mineral-bound POC to be deposited overbank and stored on the floodplain for centuries to millennia, resulting in enhanced POC remineralization. In the Rio Bermejo, selective deposition of coarse material causes the proportion of mineral-bound POC to increase with distance downstream, but the majority of exported POC is composed of discrete organic particles, suggesting that the river is a net carbon sink. In summary, this study shows that selective deposition and hydraulic sorting control the composition and fate of fluvial POC during fluvial transit.
In Chapter 5, I characterized and quantified POC transformation and oxidation during fluvial transit. I analyzed the radiocarbon content and stable carbon isotopic composition of Rio Bermejo suspended sediment and found that POC ages during fluvial transit, but is also degraded and oxidized during transient floodplain storage. Using these data, I developed a conceptual model for fluvial POC cycling that allows the estimation of POC oxidation relative to POC export, and ultimately reveals whether a river is a net source or sink of CO2 to the atmosphere. Through this study, I found that the Rio Bermejo annually exports more POC than is oxidized during transit, largely due to high rates of lateral migration that cause erosion of floodplain vegetation and soil into the river. These results imply that human engineering of rivers could alter the fluvial carbon balance, by reducing lateral POC inputs and increasing the mean sediment transit time.
Together, these three studies quantitatively link geomorphic processes to rates of POC transport and degradation across sub-annual to millennial time scales and nanoscale to 103 km spatial scales, laying the groundwork for a global-scale fluvial organic carbon cycling model.
The spread of shrubs in Namibian savannas raises questions about the resilience of these ecosystems to global change. This makes it necessary to understand the past dynamics of the vegetation, since there is no consensus on whether shrub encroachment is a new phenomenon, nor on its main drivers. However, a lack of long-term vegetation datasets for the region and the scarcity of suitable palaeoecological archives, makes reconstructing past vegetation and land cover of the savannas a challenge.
To help meet this challenge, this study addresses three main research questions: 1) is pollen analysis a suitable tool to reflect the vegetation change associated with shrub encroachment in savanna environments? 2) Does the current encroached landscape correspond to an alternative stable state of savanna vegetation? 3) To what extent do pollen-based quantitative vegetation reconstructions reflect changes in past land cover?
The research focuses on north-central Namibia, where despite being the region most affected by shrub invasion, particularly since the 21st century, little is known about the dynamics of this phenomenon.
Field-based vegetation data were compared with modern pollen data to assess their correspondence in terms of composition and diversity along precipitation and grazing intensity gradients. In addition, two sediment cores from Lake Otjikoto were analysed to reveal changes in vegetation composition that have occurred in the region over the past 170 years and their possible drivers. For this, a multiproxy approach (fossil pollen, sedimentary ancient DNA (sedaDNA), biomarkers, compound specific carbon (δ13C) and deuterium (δD) isotopes, bulk carbon isotopes (δ13Corg), grain size, geochemical properties) was applied at high taxonomic and temporal resolution. REVEALS modelling of the fossil pollen record from Lake Otjikoto was run to quantitatively reconstruct past vegetation cover. For this, we first made pollen productivity estimates (PPE) of the most relevant savanna taxa in the region using the extended R-value model and two pollen dispersal options (Gaussian plume model and Lagrangian stochastic model). The REVEALS-based vegetation reconstruction was then validated using remote sensing-based regional vegetation data.
The results show that modern pollen reflects the composition of the vegetation well, but diversity less well. Interestingly, precipitation and grazing explain a significant amount of the compositional change in the pollen and vegetation spectra. The multiproxy record shows that a state change from open Combretum woodland to encroached Terminalia shrubland can occur over a century, and that the transition between states spans around 80 years and is characterized by a unique vegetation composition. This transition is supported by gradual environmental changes induced by management (i.e. broad-scale logging for the mining industry, selective grazing and reduced fire activity associated with intensified farming) and related land-use change. Derived environmental changes (i.e. reduced soil moisture, reduced grass cover, changes in species composition and competitiveness, reduced fire intensity) may have affected the resilience of Combretum open woodlands, making them more susceptible to change to an encroached state by stochastic events such as consecutive years of precipitation and drought, and by high concentrations of pCO2. We assume that the resulting encroached state was further stabilized by feedback mechanisms that favour the establishment and competitiveness of woody vegetation.
The REVEALS-based quantitative estimates of plant taxa indicate the predominance of a semi-open landscape throughout the 20th century and a reduction in grass cover below 50% since the 21st century associated with the spread of encroacher woody taxa. Cover estimates show a close match with regional vegetation data, providing support for the vegetation dynamics inferred from multiproxy analyses. Reasonable PPEs were made for all woody taxa, but not for Poaceae.
In conclusion, pollen analysis is a suitable tool to reconstruct past vegetation dynamics in savannas. However, because pollen cannot identify grasses beyond family level, a multiproxy approach, particularly the use of sedaDNA, is required. I was able to separate stable encroached states from mere woodland phases, and could identify drivers and speculate about related feedbacks. In addition, the REVEALS-based quantitative vegetation reconstruction clearly reflects the magnitude of the changes in the vegetation cover that occurred during the last 130 years, despite the limitations of some PPEs.
This research provides new insights into pollen-vegetation relationships in savannas and highlights the importance of multiproxy approaches when reconstructing past vegetation dynamics in semi-arid environments. It also provides the first time series with sufficient taxonomic resolution to show changes in vegetation composition during shrub encroachment, as well as the first quantitative reconstruction of past land cover in the region. These results help to identify the different stages in savanna dynamics and can be used to calibrate predictive models of vegetation change, which are highly relevant to land management.