Refine
Year of publication
Document Type
- Doctoral Thesis (35) (remove)
Is part of the Bibliography
- yes (35) (remove)
Keywords
- Modellierung (35) (remove)
Institute
- Institut für Biochemie und Biologie (9)
- Institut für Umweltwissenschaften und Geographie (8)
- Institut für Geowissenschaften (6)
- Institut für Informatik und Computational Science (5)
- Extern (2)
- Hasso-Plattner-Institut für Digital Engineering gGmbH (2)
- Institut für Mathematik (2)
- Institut für Physik und Astronomie (2)
- Fachgruppe Politik- & Verwaltungswissenschaft (1)
- Institut für Chemie (1)
The standing stock and production of organismal biomass depends strongly on the organisms’ biotic environment, which arises from trophic and non-trophic interactions among them. The trophic interactions between the different groups of organisms form the food web of an ecosystem, with the autotrophic and bacterial production at the basis and potentially several levels of consumers on top of the producers. Feeding interactions can regulate communities either by severe grazing pressure or by shortage of resources or prey production, termed top-down and bottom-up control, respectively. The limitations of all communities conglomerate in the food web regulation, which is subject to abiotic and biotic forcing regimes arising from external and internal constraints. This dissertation presents the effects of alterations in two abiotic, external forcing regimes, terrestrial matter input and long-lasting low temperatures in winter. Diverse methodological approaches, a complex ecosystem model study and the analysis of two whole-lake measurements, were performed to investigate effects for the food web regulation and the resulting consequences at the species, community and ecosystem scale. Thus, all types of organisms, autotrophs and heterotrophs, at all trophic levels were investigated to gain a comprehensive overview of the effects of the two mentioned altered forcing regimes. In addition, an extensive evaluation of the trophic interactions and resulting carbon fluxes along the pelagic and benthic food web was performed to display the efficiencies of the trophic energy transfer within the food webs. All studies were conducted in shallow lakes, which is worldwide the most abundant type of lakes. The specific morphology of shallow lakes allows that the benthic production contributes substantially to the whole-lake production. Further, as shallow lakes are often small they are especially sensitive to both, changes in the input of terrestrial organic matter and the atmospheric temperature. Another characteristic of shallow lakes is their appearance in alternative stable states. They are either in a clear-water or turbid state, where macrophytes and phytoplankton dominate, respectively. Both states can stabilize themselves through various mechanisms.
These two alternative states and stabilizing mechanisms are integrated in the complex ecosystem model PCLake, which was used to investigate the effects of the enhanced terrestrial particulate organic matter (t-POM) input to lakes. The food web regulation was altered by three distinct pathways: (1) Zoobenthos received more food, increased in biomass which favored benthivorous fish and those reduced the available light due to bioturbation. (2) Zooplankton substituted autochthonous organic matter in their diet by suspended t-POM, thus the autochthonous organic matter remaining in the water reduced its transparency. (3) T-POM suspended into the water and reduced directly the available light. As macrophytes are more light-sensitive than phytoplankton they suffered the most from the lower transparency. Consequently, the resilience of the clear-water state was reduced by enhanced t-POM inputs, which makes the turbid state more likely at a given nutrient concentration. In two subsequent winters long-lasting low temperatures and a concurrent long duration of ice coverage was observed which resulted in low overall adult fish biomasses in the two study lakes – Schulzensee and Gollinsee, characterized by having and not having submerged macrophytes, respectively. Before the partial winterkill of fish Schulzensee allowed for a higher proportion of piscivorous fish than Gollinsee. However, the partial winterkill of fish aligned both communities as piscivorous fish are more sensitive to low oxygen concentrations. Young of the year fish benefitted extremely from the absence of adult fish due to lower predation pressure. Therefore, they could exert a strong top-down control on crustaceans, which restructured the entire zooplankton community leading to low crustacean biomasses and a community composition characterized by copepodites and nauplii. As a result, ciliates were released from top-down control, increased to high biomasses compared to lakes of various trophic states and depths and dominated the zooplankton community. While being very abundant in the study lakes and having the highest weight specific grazing rates among the zooplankton, ciliates exerted potentially a strong top-down control on small phytoplankton and particle-attached bacteria. This resulted in a higher proportion of large phytoplankton compared to other lakes. Additionally, the phytoplankton community was evenly distributed presumably due to the numerous fast growing and highly specific ciliate grazers. Although, the pelagic food web was completely restructured after the subsequent partial winterkills of fish, both lakes were resistant to effects of this forcing regime at the ecosystem scale. The consistently high predation pressure on phytoplankton prevented that Schulzensee switched from the clear-water to the turbid state. Further mechanisms, which potentially stabilized the clear-water state, were allelopathic effects by macrophytes and nutrient limitation in summer. The pelagic autotrophic and bacterial production was an order of magnitude more efficient transferred to animal consumers than the respective benthic production, despite the alterations of the food web structure after the partial winterkill of fish. Thus, the compiled mass-balanced whole-lake food webs suggested that the benthic bacterial and autotrophic production, which exceeded those of the pelagic habitat, was not used by animal consumers. This holds even true if the food quality, additional consumers such as ciliates, benthic protozoa and meiobenthos, the pelagic-benthic link and the potential oxygen limitation of macrobenthos were considered. Therefore, low benthic efficiencies suggest that lakes are primarily pelagic systems at least at the animal consumer level.
Overall, this dissertation gives insights into the regulation of organism groups in the pelagic and benthic habitat at each trophic level under two different forcing regimes and displays the efficiency of the carbon transfer in both habitats. The results underline that the alterations of external forcing regimes affect all hierarchical level including the ecosystem.
Functional traits determine biomass dynamics, coexistence and energetics in plankton food webs
(2022)
Plankton food webs are the basis of marine and limnetic ecosystems. Especially aquatic ecosystems of high biodiversity provide important ecosystem services for humankind as providers of food, coastal protection, climate regulation, and tourism. Understanding the dynamics of biomass and coexistence in these food webs is a first step to understanding the ecosystems. It also lays the foundation for the development of management strategies for the maintenance of the marine and freshwater biodiversity despite anthropogenic influences.
Natural food webs are highly complex, and thus often equally complex methods are needed to analyse and understand them well. Models can help to do so as they depict simplified parts of reality. In the attempt to get a broader understanding of the complex food webs, diverse methods are used to investigate different questions.
In my first project, we compared the energetics of a food chain in two versions of an allometric trophic network model. In particular, we solved the problem of unrealistically high trophic transfer efficiencies (up to 70%) by accounting for both basal respiration and activity respiration, which decreased the trophic transfer efficiency to realistic values of ≤30%. Next in my second project I turned to plankton food webs and especially phytoplankton traits. Investigating a long-term data set from Lake Constance we found evidence for a trade-off between defence and growth rate in this natural phytoplankton community. I continued working with this data set in my third project focusing on ciliates, the main grazer of phytoplankton in spring. Boosted regression trees revealed that temperature and predators have the highest influence on net growth rates of ciliates. We finally investigated in my fourth project a food web model inspired by ciliates to explore the coexistence of plastic competitors and to study the new concept of maladaptive switching, which revealed some drawbacks of plasticity: faster adaptation led to higher maladaptive switching towards undefended phenotypes which reduced autotroph biomass and coexistence and increased consumer biomass.
It became obvious that even well-established models should be critically questioned as it is important not to forget reality on the way to a simplistic model. The results showed furthermore that long-term data sets are necessary as they can help to disentangle complex natural processes. Last, one should keep in mind that the interplay between models and experiments/ field data can deliver fruitful insights about our complex world.
Durch die anthropogene Nutzung sind viele Auen in Mitteleuropa verändert worden, wobei insbesondere die Retentionsflächen stark verringert wurden. Während Auen seit längerem im Fokus der wissenschaftlichen Bearbeitung stehen, gibt es bisher große Wissensdefizite in der Frage der Auenreaktivierungen. Zum einen sind derartige Projekte bisher kaum verwirklicht und zum anderen ist ein langfristiges Monitoring notwendig, um die Anpassung von Biozönosen an die veränderten Standortbedingungen beobachten zu können. Um die Folgen derartiger Eingriffe zu analysieren, bieten sich computergestützte Modellierungen der Landschaftsentwicklung an, wie sie in der vorliegenden Arbeit verwirklicht wurden. Ziel der Arbeit war, mit Hilfe eines Geografischen Informationssystems (GIS) das Entwicklungspotenzial der Landschaft bei verschiedenen Rückdeichungsvarianten auf der Ebene der Biotoptypen darzustellen. Dabei ging es nicht um die Erstellung eines allgemein gültigen Auenmodells sondern um die Erarbeitung eines Modells für einen konkreten Anwendungsfall. Der erarbeitete Ansatz sollte zudem für die landschaftsplanerische Praxis geeignet sein. Als Beispielgebiete wurden Flächen an der Mittleren Elbe bei Rogätz und Sandau, beide im nördlichen Teil von Sachsen-Anhalt, ausgewählt. Die vorliegende Arbeit gliedert sich in zwei Teile. Im ersten Teil werden Erhebungen und Auswertungen als Grundlage der Modellentwicklung dargestellt. Dazu wurden die Biotoptypen der Beispielgebiete flächendeckend erhoben und mit punktuellen Vegetationserhebungen ergänzt. Aus dem Forschungsprojekt "Rückgewinnung von Retentionsflächen und Altauenreaktivierung an der Mittleren Elbe in Sachsen-Anhalt" des Bundesministeriums für Bildung und Forschung (BMBF) standen standortökologische Daten der Hydrologie und Bodenkunde zur Verfügung. Ziel der Auswertung war, Schlüsselfaktoren für Hydrologie und Bodenbedingungen innerhalb der rezenten Aue zu identifizieren, die zur Ausprägung bestimmter Biotoptypen führen. Im zweiten Teil der Arbeit wurde ein Modell für Biotoptypenpotenziale auf den geplanten Rück–deichungsflächen entwickelt. Das Modell bearbeitet die Datenbank der verwendeten GIS-Dateien, die auf Daten zum Bestand beruht und um solche der Prognose der Standortökologie (Hydrologie und Boden) im Rückdeichungsfalle aus dem BMBF-Projekt erweitert wurde. Weitere Voraussetzung für die Modellierung war die Erarbeitung von Leitbildern, in denen unterschiedliche Nutzungsszenarios für die Landschaft nach Deichrückverlegung hypothetisch festgelegt wurden. Insbesondere die Nutzungsintensität wurde variiert, von einer Variante intensiver land- und forstwirtschaftlicher Nutzung über sogenannte integrierte Entwicklungsziele aus dem BMBF-Projekt bis hin zu einer Variante der Naturschutznutzung. Zusätzlich wurde eine zukünftige Potentielle Natürliche Vegetation modelliert. Eine Überprüfung des Modell fand für den Raum der rezenten Aue in der intensiven Nutzungsvariante statt, die der gegenwärtigen Nutzung am nächsten kommt. Werden Informationen des Bestandsbiotoptyps als Korrekturgröße in das Modell einbezogen, konnte für viele Biotoptypen eine Trefferquote von über 90 % erreicht werden. Bei flächenmäßig weniger bedeutenden Bio–toptypen lag dieser Wert aufgrund der schmaleren Datenbasis zwischen 20 und 40 %. Als Ergebnis liegt für unterschiedliche Deichvarianten und Leitbilder in den Beispielgebieten die Landschaftsentwicklung als Biotoppotenzial vor. Als eine vereinfachte Regionalisierung der punktuellen Vegetationsdaten wurde im Modell geprüft, inwieweit die modellierten Biotopflächen der Charakteristik der pflanzensoziologischen Aufnahmen aus der rezenten Aue entsprechen. In dem Falle wurde die Pflanzengesellschaft der jeweiligen ökologisch im Rahmen der Untersuchung einheitlichen Flächeneinheit zugeordnet. Anteilig lässt sich damit die Biotopprognosefläche pflanzensoziologisch konkretisieren. Die vorliegende Arbeit gehört zu den bisher wenigen Arbeiten, die sich mit den Folgen von Auenreaktivierung auf die Entwicklung der Landschaft auseinandersetzen. Sie zeigt eine Möglichkeit auf, Prognosemodelle für Biotoptypen und Vegetation anhand begrenzter Felduntersuchungen zu entwerfen. Derartige Modelle können zum Verständnis von Eingriffen in den Naturhaushalt, wie sie die Deichrückverlegungen darstellen, beitragen und eine Folgenabschätzung unterstützen.
The scope of this study is to investigate the environmental change in the German part of the Elbe river basin, whereby the focus is on two water related problems: having too little water and having water of poor quality. The Elbe region is representative of humid to semi-humid landscapes in central Europe, where water availability during the summer season is the limiting factor for plant growth and crop yields, especially in the loess areas, where the annual precipitation is lower than 500 mm. It is most likely that water quantity problems will accelerate in future, because both the observed and the projected climate trend show an increase in temperature and a decrease in annual precipitation, especially in the summer. Another problem is nutrient pollution of rivers and lakes. In the early 1990s, the Elbe was one of the most heavily polluted rivers in Europe. Even though nutrient emissions from point sources have notably decreased in the basin due to reduction of industrial sources and introduction of new and improved sewage treatment facilities, the diffuse sources of pollution are still not sufficiently controlled. The investigations have been done using the eco-hydrological model SWIM (Soil and Water Integrated Model), which has been embedded in a model framework of climate and agro-economic models. A global scenario of climate and agro-economic change has been regionalized to generate transient climate forcing data and land use boundary conditions for the model. The model was used to transform the climate and land use changes into altered evapotranspiration, groundwater recharge, crop yields and river discharge, and to investigate the development of water quality in the river basin. Particular emphasis was given to assessing the significance of the impacts on the hydrology, taking into account in the analysis the inherent uncertainty of the regional climate change as well as the uncertainty in the results of the model. The average trend of the regional climate change scenario indicates a decrease in mean annual precipitation up to 2055 of about 1.5 %, but with high uncertainty (covering the range from -15.3 % to +14.8 %), and a less uncertain increase in temperature of approximately 1.4 K. The relatively small change in precipitation in conjunction with the change in temperature leads to severe impacts on groundwater recharge and river flow. Increasing temperature induces longer vegetation periods, and the seasonality of the flow regime changes towards longer low flow spells in summer. As a results the water availability will decrease on average of the scenario simulations by approximately 15 %. The increase in temperatures will improve the growth conditions for temperature limited crops like maize. The uncertainty of the climate trend is particularly high in regions where the change is the highest. The simulation results for the Nuthe subbasin of the Elbe indicate that retention processes in groundwater, wetlands and riparian zones have a high potential to reduce the nitrate concentrations of rivers and lakes in the basin, because they are located at the interface between catchment area and surface water bodies, where they are controlling the diffuse nutrient inputs. The relatively high retention of nitrate in the Nuthe basin is due to the long residence time of water in the subsurface (about 40 years), with good conditions for denitrification, and due to nitrate retention and plant uptake in wetlands and riparian zones. The concluding result of the study is that the natural environment and communities in parts of Central Europe will have considerably lower water resources under scenario conditions. The water quality will improve, but due to the long residence time of water and nutrients in the subsurface, this improvement will be slower in areas where the conditions for nutrient turn-over in the subsurface are poor.
Durch die Stilllegung der Kali-Gewinnung und -Produktion zwischen 1990 und 1993 sowie die begonnene Rekultivierung der Kali-Rückstandshalden haben sich die Salzfrachteintragsbedingungen für die Fließgwewässer im "Südharz-Kalirevier" in Thüringen zum Teil deutlich verändert. Aufgrund erheblich geringerer Salzeinträge in die Vorfluter Wipper und Bode ist es möglich geworden, zu einer ökologisch verträglichen Salzfrachtsteuerung überzugehen. Die Komplexität der zugrunde liegenden Stofftransportprozesse im Einzugsgebiet der Wipper macht es jedoch unumgänglich, den Steuerungsvorgang nicht nur durch reine Bilanzierungsvorgänge auf der betrachteten Steuerstrecke zu erfassen (so wie bisher praktiziert), sondern auch die Abflussdynamik im Fließgewässer und den Wasserhaushalt im Gebiet mit einzubeziehen. Die Ergebnisse dieser Arbeit dienen zum einen einer Vertiefung der Prozessverständnisse und der Interaktion von Wasserhaushalt, Abflussbildung sowie Stofftransport in bergbaubeeinflussten Einzugsgebieten am Beispiel der Unstrut bzw. ihrer relevanten Nebenflüsse. Zum anderen sollen sie zur Analyse und Bewertung eines Bewirtschaftungsplanes für die genannten Fließgewässer herangezogen werden können. Ziel dieser Arbeit ist die Erstellung eines prognosetauglichen Steuerungsinstrumentes, das für die Bewirtschaftung von Flusseinzugsgebieten unterschiedlicher Größe genutzt und unter den Rahmenbedingungen der bergbaubedingten salinaren Einträge effektiv zur Steuerung der anthropogenen Frachten eingesetzt werden kann. Die Quellen der anthropogen eingeleiteten Salzfracht sind vor allem die Rückstandshalden der stillgelegten Kaliwerke. Durch Niederschläge entstehen salzhaltige Haldenabwässer, die zum Teil ungesteuert über oberflächennahe Ausbreitungsvorgänge direkt in die Vorfluter gelangen, ein anderer Teil wird über die Speichereinrichtungen gefasst und gezielt abgestoßen. Durch Undichtigkeiten des Laugenstapelbeckens in Wipperdorf gelangen ebenfalls ungesteuerte Frachteinträge in die Wipper. Ein weiterer Eintragspfad ist zudem die geogene Belastung. Mit Hilfe detaillierter Angaben zu den oben genannten Eintragspfaden konnten Modellrechnungen im Zeitraum von 1992 bis 2003 durchgeführt werden. Durch die Ausarbeitung eines neuartigen Steuerungskonzeptes für das Laugenstapelbecken Wipperdorf, war es nun möglich, die gefasste Haldenlauge entsprechend der aktuellen Abflusssituation gezielt abstoßen zu können. Neben der modelltechnischen Erfassung der aktuellen hydrologischen Situation und der Vorgabe eines Chlorid-Konzentrationssteuerzieles für den Pegel Hachelbich, mussten dabei weitere Randbedingungen (Beckenkapazität, Beckenfüllstand, Mindestfüllstand, Kapazität des Ableitungskanals, usw.) berücksichtigt werden. Es zeigte sich, dass unter Anwendung des Steuerungskonzeptes die Schwankungsbreite der Chloridkonzentration insgesamt gesehen deutlich verringert werden konnte. Die Überschreitungshäufigkeiten bezüglich eines Grenzwertes von 2 g Chlorid/l am Pegel Hachelbich fielen deutlich, und auch die maximale Dauer einer solchen Periode konnte stark verkürzt werden. Kritische Situationen bei der modelltechnischen Frachtzusteuerung traten nur dann auf, wenn Niedrigwasserverhältnisse durch die Simulationsberechnungen noch unterschätzt wurden. Dies hatte deutliche Überschreitungen der Zielvorgaben für den Pegel Hachelbich zur Folge. Mit Hilfe des Steuerungsalgorithmus konnten desweiteren auch Szenarienberechnungen durchgeführt werden, um die Auswirkungen zukünftig zu erwartender Salzfrachten näher spezifizieren zu können. Dabei konnte festgestellt werden, dass Abdichtungsmaßnahmen der Haldenkörper sich direkt positiv auf die Entwicklung der Konzentration in Hachelbich auswirkten. Durch zusätzlich durchgeführte Langzeitszenarien konnte darüber hinaus nachgewiesen werden, dass langfristig eine Grenzwertfestlegung auf 1,5 g Chlorid/l in Hachelbich möglich ist, und die Stapelkapazitäten dazu ausreichend bemessen sind.
Interaktive System sind dynamische Systeme mit einem zumeist informationellen Kern, die über eine Benutzungsschnittstelle von einem oder mehreren Benutzern bedient werden können. Grundlage für die Benutzung interaktiver Systeme ist das Verständnis von Zweck und Funktionsweise. Allein aus Form und Gestalt der Benutzungsschnittstelle ergibt sich ein solches Verständnis nur in einfachen Fällen. Mit steigender Komplexität ist daher eine verständliche Beschreibung solcher Systeme für deren Entwicklung und Benutzung unverzichtbar. Abhängig von ihrem Zweck variieren die Formen vorgefundener Beschreibungen in der Literatur sehr stark. Ausschlaggebend für die Verständlichkeit einer Beschreibung ist jedoch primär die ihr zugrundeliegende Begriffswelt. Zur Beschreibung allgemeiner komplexer diskreter Systeme - aufbauend auf einer getrennten Betrachtung von Aufbau-, Ablauf- und Wertestrukturen - existiert eine bewährte Begriffswelt. Eine Spezialisierung dieser Begriffs- und Vorstellungswelt, die den unterschiedlichen Betrachtungsebenen interaktiver Systeme gerecht wird und die als Grundlage beliebiger Beschreibungsansätze interaktiver Systeme dienen kann, gibt es bisher nicht. Ziel dieser Arbeit ist die Bereitstellung einer solchen Begriffswelt zur effizienten Kommunikation der Strukturen interaktiver Systeme. Dadurch soll die Grundlage für eine sinnvolle Ergänzung bestehender Beschreibungs- und Entwicklungsansätze geschaffen werden. Prinzipien der Gestaltung von Benutzungsschnittstellen, Usability- oder Ergonomiebetrachtungen stehen nicht im Mittelpunkt der Arbeit. Ausgehend von der informationellen Komponente einer Benutzungsschnittstelle werden drei Modellebenen abgegrenzt, die bei der Betrachtung eines interaktiven Systems zu unterscheiden sind. Jede Modellebene ist durch eine typische Begriffswelt gekennzeichnet, die ihren Ursprung in einer aufbauverwurzelten Vorstellung hat. Der durchgängige Bezug auf eine Systemvorstellung unterscheidet diesen Ansatz von dem bereits bekannten Konzept der Abgrenzung unterschiedlicher Ebenen verschiedenartiger Entwurfsentscheidungen. Die Fundamental Modeling Concepts (FMC) bilden dabei die Grundlage für die Findung und die Darstellung von Systemstrukturen. Anhand bestehender Systembeschreibungen wird gezeigt, wie die vorgestellte Begriffswelt zur Modellfindung genutzt werden kann. Dazu wird eine repräsentative Auswahl vorgefundener Systembeschreibungen aus der einschlägigen Literatur daraufhin untersucht, in welchem Umfang durch sie die Vorstellungswelt dynamischer Systeme zum Ausdruck kommt. Defizite in der ursprünglichen Darstellung werden identifiziert. Anhand von Alternativmodellen zu den betrachteten Systemen wird der Nutzen der vorgestellten Begriffswelt und Darstellungsweise demonstriert.
Zwischen 1990 und 1994 wurden rund 1000 Liegenschaften, die in der ehemaligen DDR von der Sowjetarmee und der NVA für militärische Übungen genutzt wurden, an Bund und Länder übergeben. Die größten Truppenübungsplätze liegen in Brandenburg und sind heute teilweise in Großschutzgebiete integriert, andere Plätze werden von der Bundeswehr weiterhin aktiv genutzt. Aufgrund des militärischen Betriebs sind die Böden dieser Truppenübungsplätze oft durch Blindgänger, Munitionsreste, Treibstoff- und Schmierölreste bis hin zu chemischen Kampfstoffen belastet. Allerdings existieren auf fast allen Liegenschaften neben diesen durch Munition und militärische Übungen belasteten Bereichen auch naturschutzfachlich wertvolle Flächen; gerade in den Offenlandbereichen kann dies durchaus mit einer Belastung durch Kampfmittel einhergehen. Charakteristisch für diese offenen Flächen, zu denen u.a. Zwergstrauchheiden, Trockenrasen, wüstenähnliche Sandflächen und andere nährstoffarme baumlose Lebensräume gehören, sind Großflächigkeit, Abgeschiedenheit sowie ihre besondere Nutzung und Bewirtschaftung, d.h. die Abwesenheit von land- und forstwirtschaftlichem Betrieb sowie von Siedlungsflächen. Diese Charakteristik war die Grundlage für die Entwicklung einer speziell angepassten Flora und Fauna. Nach Beendigung des Militärbetriebs setzte dann in weiten Teilen eine großflächige Sukzession – die allmähliche Veränderung der Zusammensetzung von Pflanzen- und Tiergesellschaften – ein, die diese offenen Bereiche teilweise bereits in Wald verwandelte und somit verschwinden ließ. Dies wiederum führte zum Verlust der an diese Offenlandflächen gebundenen Tier- und Pflanzenarten. Zur Erhaltung, Gestaltung und Entwicklung dieser offenen Flächen wurden daher von einer interdisziplinären Gruppe von Naturwissenschaftlern verschiedene Methoden und Konzepte auf ihre jeweilige Wirksamkeit untersucht. So konnten schließlich die für die jeweiligen Standortbedingungen geeigneten Maßnahmen eingeleitet werden. Voraussetzung für die Einleitung der Maßnahmen sind zum einen Kenntnisse zu diesen jeweiligen Standortbedingungen, d.h. zum Ist-Zustand, sowie zur Entwicklung der Flächen, d.h. zur Dynamik. So kann eine Abschätzung über die zukünftige Flächenentwicklung getroffen werden, damit ein effizienter Maßnahmeneinsatz stattfinden kann. Geoinformationssysteme (GIS) spielen dabei eine entscheidende Rolle zur digitalen Dokumentation der Biotop- und Nutzungstypen, da sie die Möglichkeit bieten, raum- und zeitbezogene Geometrie- und Sachdaten in großen Mengen zu verarbeiten. Daher wurde ein fachspezifisches GIS für Truppenübungsplätze entwickelt und implementiert. Die Aufgaben umfassten die Konzeption der Datenbank und des Objektmodells sowie fachspezifischer Modellierungs-, Analyse- und Präsentationsfunktionen. Für die Integration von Fachdaten in die GIS-Datenbank wurde zudem ein Metadatenkatalog entwickelt, der in Form eines zusätzlichen GIS-Tools verfügbar ist. Die Basisdaten für das GIS wurden aus Fernerkundungsdaten, topographischen Karten sowie Geländekartierungen gewonnen. Als Instrument für die Abschätzung der zukünftigen Entwicklung wurde das Simulationstool AST4D entwickelt, in dem sowohl die Nutzung der (Raster-)Daten des GIS als Ausgangsdaten für die Simulationen als auch die Nutzung der Simulationsergebnisse im GIS möglich ist. Zudem können die Daten in AST4D raumbezogen visualisiert werden. Das mathematische Konstrukt für das Tool war ein so genannter Zellulärer Automat, mit dem die Flächenentwicklung unter verschiedenen Voraussetzungen simuliert werden kann. So war die Bildung verschiedener Szenarien möglich, d.h. die Simulation der Flächenentwicklung mit verschiedenen (bekannten) Eingangsparametern und den daraus resultierenden unterschiedlichen (unbekannten) Endzuständen. Vor der Durchführung einer der drei in AST4D möglichen Simulationsstufen können angepasst an das jeweilige Untersuchungsgebiet benutzerspezifische Festlegungen getroffen werden.
In this work, an approach of paleoclimate reconstruction for tropical East Africa is presented. After giving a short summary of modern climate conditions in the tropics and the East African climate peculiarity, the potential of reconstructing climate from paleolake sediments is discussed. As demonstrated, the hydrologic sensitivity of high-elevated closed-basin lakes in the Central Kenya Rift yields valuable guaranties for the establishment of long-term climate records. Temporal fluctuations of the limnological characteristics saved in the lake sediments are used to define variations in the Quaternary climate history. Based on diatom analyses in radiocarbon- and 40Ar/39Ar-dated sediments, a chronology of paleoecologic fluctuations is developed for the Central Kenya Rift -lakes Nakuru, Elmenteita and Naivasha. At least during the penultimate interglacial (around 140 to 60 kyr BP) and during the last interglacial (around 12 to 4 kyr BP), these lakes experienced several transgression-regression cycles on time intervals of about 11,000 years. Additionally, a long-term trend of lake evolution is found suggesting the general succession from deep freshwater lakes towards more saline waters during the last million years. Using ecologic transfer functions and a simple lake-balance model, the observed paleohydrologic fluctuations are linked to potential precipitation-evaporation changes in the lake basins. Though also tectonic influences on the drainage pattern and the effect of varied seepage are investigated, it can be shown that already a small increase in precipitation of about 30±10 % may have affected the hydrologic budget of the intra-rift lakes within the reconstructed range. The findings of this study help to assess the natural climate variability of East Africa. They furthermore reflect the sensitivity of the Central Kenya Rift -lakes to fluctuations of large-scale climate parameters, such as solar radiation and sea-surface temperatures of the Indian Ocean.
Magmatic-hydrothermal systems form a variety of ore deposits at different proximities to upper-crustal hydrous magma chambers, ranging from greisenization in the roof zone of the intrusion, porphyry mineralization at intermediate depths to epithermal vein deposits near the surface. The physical transport processes and chemical precipitation mechanisms vary between deposit types and are often still debated.
The majority of magmatic-hydrothermal ore deposits are located along the Pacific Ring of Fire, whose eastern part is characterized by the Mesozoic to Cenozoic orogenic belts of the western North and South Americas, namely the American Cordillera. Major magmatic-hydrothermal ore deposits along the American Cordillera include (i) porphyry Cu(-Mo-Au) deposits (along the western cordilleras of Mexico, the western U.S., Canada, Chile, Peru, and Argentina); (ii) Climax- (and sub−) type Mo deposits (Colorado Mineral Belt and northern New Mexico); and (iii) porphyry and IS-type epithermal Sn(-W-Ag) deposits of the Central Andean Tin Belt (Bolivia, Peru and northern Argentina).
The individual studies presented in this thesis primarily focus on the formation of different styles of mineralization located at different proximities to the intrusion in magmatic-hydrothermal systems along the American Cordillera. This includes (i) two individual geochemical studies on the Sweet Home Mine in the Colorado Mineral Belt (potential endmember of peripheral Climax-type mineralization); (ii) one numerical modeling study setup in a generic porphyry Cu-environment; and (iii) a numerical modeling study on the Central Andean Tin Belt-type Pirquitas Mine in NW Argentina.
Microthermometric data of fluid inclusions trapped in greisen quartz and fluorite from the Sweet Home Mine (Detroit City Portal) suggest that the early-stage mineralization precipitated from low- to medium-salinity (1.5-11.5 wt.% equiv. NaCl), CO2-bearing fluids at temperatures between 360 and 415°C and at depths of at least 3.5 km. Stable isotope and noble gas isotope data indicate that greisen formation and base metal mineralization at the Sweet Home Mine was related to fluids of different origins. Early magmatic fluids were the principal source for mantle-derived volatiles (CO2, H2S/SO2, noble gases), which subsequently mixed with significant amounts of heated meteoric water. Mixing of magmatic fluids with meteoric water is constrained by δ2Hw-δ18Ow relationships of fluid inclusions. The deep hydrothermal mineralization at the Sweet Home Mine shows features similar to deep hydrothermal vein mineralization at Climax-type Mo deposits or on their periphery. This suggests that fluid migration and the deposition of ore and gangue minerals in the Sweet Home Mine was triggered by a deep-seated magmatic intrusion.
The second study on the Sweet Home Mine presents Re-Os molybdenite ages of 65.86±0.30 Ma from a Mo-mineralized major normal fault, namely the Contact Structure, and multimineral Rb-Sr isochron ages of 26.26±0.38 Ma and 25.3±3.0 Ma from gangue minerals in greisen assemblages. The age data imply that mineralization at the Sweet Home Mine formed in two separate events: Late Cretaceous (Laramide-related) and Oligocene (Rio Grande Rift-related). Thus, the age of Mo mineralization at the Sweet Home Mine clearly predates that of the Oligocene Climax-type deposits elsewhere in the Colorado Mineral Belt. The Re-Os and Rb-Sr ages also constrain the age of the latest deformation along the Contact Structure to between 62.77±0.50 Ma and 26.26±0.38 Ma, which was employed and/or crosscut by Late Cretaceous and Oligocene fluids. Along the Contact Structure Late Cretaceous molybdenite is spatially associated with Oligocene minerals in the same vein system, a feature that precludes molybdenite recrystallization or reprecipitation by Oligocene ore fluids.
Ore precipitation in porphyry copper systems is generally characterized by metal zoning (Cu-Mo to Zn-Pb-Ag), which is suggested to be variably related to solubility decreases during fluid cooling, fluid-rock interactions, partitioning during fluid phase separation and mixing with external fluids. The numerical modeling study setup in a generic porphyry Cu-environment presents new advances of a numerical process model by considering published constraints on the temperature- and salinity-dependent solubility of Cu, Pb and Zn in the ore fluid. This study investigates the roles of vapor-brine separation, halite saturation, initial metal contents, fluid mixing, and remobilization as first-order controls of the physical hydrology on ore formation. The results show that the magmatic vapor and brine phases ascend with different residence times but as miscible fluid mixtures, with salinity increases generating metal-undersaturated bulk fluids. The release rates of magmatic fluids affect the location of the thermohaline fronts, leading to contrasting mechanisms for ore precipitation: higher rates result in halite saturation without significant metal zoning, lower rates produce zoned ore shells due to mixing with meteoric water. Varying metal contents can affect the order of the final metal precipitation sequence. Redissolution of precipitated metals results in zoned ore shell patterns in more peripheral locations and also decouples halite saturation from ore precipitation.
The epithermal Pirquitas Sn-Ag-Pb-Zn mine in NW Argentina is hosted in a domain of metamorphosed sediments without geological evidence for volcanic activity within a distance of about 10 km from the deposit. However, recent geochemical studies of ore-stage fluid inclusions indicate a significant contribution of magmatic volatiles. This study tested different formation models by applying an existing numerical process model for porphyry-epithermal systems with a magmatic intrusion located either at a distance of about 10 km underneath the nearest active volcano or hidden underneath the deposit. The results show that the migration of the ore fluid over a 10-km distance results in metal precipitation by cooling before the deposit site is reached. In contrast, simulations with a hidden magmatic intrusion beneath the Pirquitas deposit are in line with field observations, which include mineralized hydrothermal breccias in the deposit area.
Water shortage is a serious threat for many societies worldwide. In drylands, water management measures like the construction of reservoirs are affected by eroded sediments transported in the rivers. Thus, the capability of assessing water and sediment fluxes at the river basin scale is of vital importance to support management decisions and policy making. This subject was addressed by the DFG-funded SESAM-project (Sediment Export from large Semi-Arid catchments: Measurements and Modelling). As a part of this project, this thesis focuses on (1) the development and implementation of an erosion module for a meso-scale catchment model, (2) the development of upscaling and generalization methods for the parameterization of such model, (3) the execution of measurements to obtain data required for the modelling and (4) the application of the model to different study areas and its evaluation. The research was carried out in two meso-scale dryland catchments in NE-Spain: Ribera Salada (200 km²) and Isábena (450 km²). Adressing objective 1, WASA-SED, a spatially semi-distributed model for water and sediment transport at the meso-scale was developed. The model simulates runoff and erosion processes at the hillslope scale, transport processes of suspended and bedload fluxes in the river reaches, and retention and remobilisation processes of sediments in reservoirs. This thesis introduces the model concept, presents current model applications and discusses its capabilities and limitations. Modelling at larger scales faces the dilemma of describing relevant processes while maintaining a manageable demand for input data and computation time. WASA-SED addresses this challenge by employing an innovative catena-based upscaling approach: the landscape is represented by characteristic toposequences. For deriving these toposequences with regard to multiple attributes (eg. topography, soils, vegetation) the LUMP-algorithm (Landscape Unit Mapping Program) was developed and related to objective 2. It incorporates an algorithm to retrieve representative catenas and their attributes, based on a Digital Elevation Model and supplemental spatial data. These catenas are classified to provide the discretization for the WASA-SED model. For objective 3, water and sediment fluxes were monitored at the catchment outlet of the Isábena and some of its sub-catchments. For sediment yield estimation, the intermittent measurements of suspended sediment concentration (SSC) had to be interpolated. This thesis presents a comparison of traditional sediment rating curves (SRCs), generalized linear models (GLMs) and non-parametric regression using Random Forests (RF) and Quantile Regression Forests (QRF). The observed SSCs are highly variable and range over six orders of magnitude. For these data, traditional SRCs performed poorly, as did GLMs, despite including other relevant process variables (e.g. rainfall intensities, discharge characteristics). RF and QRF proved to be very robust and performed favourably for reproducing sediment dynamics. QRF additionally excels in providing estimates on the accuracy of the predictions. Subsequent analysis showed that most of the sediment was exported during intense storms of late summer. Later floods yielded successively less sediment. Comparing sediment generation to yield at the outlet suggested considerable storage effects within the river channel. Addressing objective 4, the WASA-SED model was parameterized for the two study areas in NE Spain and applied with different foci. For Ribera Salada, the uncalibrated model yielded reasonable results for runoff and sediment. It provided quantitative measures of the change in runoff and sediment yield for different land-uses. Additional land management scenarios were presented and compared to impacts caused by climate change projections. In contrast, the application for the Isábena focussed on exploring the full potential of the model's predictive capabilities. The calibrated model achieved an acceptable performance for the validation period in terms of water and sediment fluxes. The inadequate representation of the lower sub-catchments inflicted considerable reductions on model performance, while results for the headwater catchments showed good agreement despite stark contrasts in sediment yield. In summary, the application of WASA-SED to three catchments proved the model framework to be a practicable multi-scale approach. It successfully links the hillslope to the catchment scale and integrates the three components hillslope, river and reservoir in one model. Thus, it provides a feasible approach for tackling issues of water and sediment yield at the meso-scale. The crucial role of processes like transmission losses and sediment storage in the river has been identified. Further advances can be expected when the representation of connectivity of water and sediment fluxes (intra-hillslope, hillslope-river, intra-river) is refined and input data improves.