Refine
Year of publication
- 2011 (37) (remove)
Document Type
- Doctoral Thesis (37) (remove)
Is part of the Bibliography
- yes (37)
Keywords
- Nanopartikel (3)
- Selbstorganisation (3)
- nanoparticles (3)
- self-assembly (3)
- RAFT (2)
- ionic liquids (2)
- ionische Flüssigkeiten (2)
- thermoresponsive (2)
- ATRP (1)
- Adsorption (1)
Institute
- Institut für Chemie (37) (remove)
In this work, the development of a new molecular building block, based on synthetic peptides derived from decorin, is presented. These peptides represent a promising basis for the design of polymer-based biomaterials that mimic the ECM on a molecular level and exploit specific biological recognition for technical applications. Multiple sequence alignments of the internal repeats of decorin that formed the inner and outer surface of the arch-shaped protein were used to develop consensus sequences. These sequences contained conserved sequence motifs that are likely to be related to structural and functional features of the protein. Peptides representative for the consensus sequences were synthesized by microwave-assisted solid phase peptide synthesis and purified by RP-HPLC, with purities higher than 95 mol%. After confirming the desired masses by MALDI-TOF-MS, the primary structure of each peptide was investigated by 1H and 2D NMR, from which a full assignment of the chemical shifts was obtained. The characterization of the peptides conformation in solution was performed by CD spectroscopy, which demonstrated that using TFE, the peptides from the outer surface of decorin show a high propensity to fold into helical structures as observed in the original protein. To the contrary, the peptides from the inner surface did not show propensity to form stable secondary structure. The investigation of the binding capability of the peptides to Collagen I was performed by surface plasmon resonance analyses, from which all but one of the peptides representing the inner surface of decorin showed binding affinity to collagen with values of dissociation constant between 2•10-7 M and 2.3•10-4 M. On the other hand, the peptides representative for the outer surface of decorin did not show any significant interaction to collagen. This information was then used to develop experimental demonstration for the binding capabilities of the peptides from the inner surface of decorin to collagen even when used in more complicated situations close to possible appications. With this purpose, the peptide (LRELHLNNN) which showed the highest binding affinity to collagen (2•10-7 M) was functionalized with an N-terminal triple bond in order to obtain a peptide dimer via copper(I)-catalyzed cycloaddition reaction with 4,4'-diazidostilbene-2,2'-disulfonic acid. Rheological measurements showed that the presence of the peptide dimer was able to enhance the elastic modulus (G') of a collagen gel from ~ 600 Pa (collagen alone) to ~ 2700 Pa (collagen and peptide dimer). Moreover, it was shown that the mechanical properties of a collagen gel can be tailored by using different molar ratios of peptide dimer respect to collagen. The same peptide, functionalized with the triple bond, was used to obtain a peptide-dye conjugate by coupling it with N-(5'-azidopentanoyl)-5-aminofluorescein. An aqueous solution (5 vol% methanol) of the peptide dye conjugate was injected into a collagen and a hyaluronic acid (HA) gel and images of fluorescence detection showed that the diffusion of the peptide was slower in the collagen gel compared to the HA gel. The third experimental demonstration was gained using the peptide (LSELRLHNN) which showed the lower binding affinity (2.3•10-4 M) to collagen. This peptide was grafted to hyaluronic acid via EDC-chemistry, with a degree of functionalization of 7 ± 2 mol% as calculated by 1H-NMR. The grafting was further confirmed by FTIR and TGA measurements, which showed that the onset of decomposition for the HA-g-peptide decreased by 10 °C compared to the native HA. Rheological measurements showed that the elastic modulus of a system based on collagen and HA-g-peptide increased by almost two order of magnitude (G' = 200 Pa) compared to a system based on collagen and HA (G' = 0.9 Pa). Overall, this study showed that the synthetic peptides, which were identified from decorin, can be applied as potential building blocks for biomimetic materials that function via biological recognition.
Poröse Sol-Gel-Materialien finden in vielen Bereichen Anwendung bzw. sind Gegenstand der aktuellen Forschung. Zu diesen Bereichen zählen sowohl klassische Anwendungen, wie z. B. die Verwendung als Katalysator, Molekularsieb oder Trockenmittel, als auch nichtklassische Anwendungen, wie z. B. der Einsatz als Kontrastmittel in der Magnet-Resonanz-Tomographie oder in Form von dünnen Zeolithfilmen als Isolatoren in Mikrochips. Auch für den Einsatz in der Photonik werden poröse Materialien in Betracht gezogen, wie die Entwicklung des Zeolith-Farbstoff-Lasers zeigt. Mikroporöse Zeolithe können generell über einfache Ionenaustauschreaktionen mit Lanthanoidionen in lumineszente Materialien umgewandelt werden. Neben der Erzeugung eines lumineszenten Materials, dessen Lumineszenzeigenschaften charakterisiert werden müssen, bietet die Nutzung von Lanthanoidionen die Möglichkeit diese Ionen als Sonde zur Charakterisierung der Ion-Wirt-Wechselwirkungen zu funktionalisieren, was z. B. in Bezug auf die Anwendung als Katalysator von großer Bedeutung ist. Dabei werden die einzigartigen Lumineszenzeigenschaften der Lanthanoidionen, in diesem Fall von Europium(III) und Terbium(III), genutzt. In dieser Arbeit wurden Lanthanoid-dotierte mikroporöse Zeolithe, mikroporös-mesoporöse Hybridmaterialien und mesoporöse Silikate hinsichtlich ihrer Lumineszenzeigenschaften und ihrer Wechselwirkung des Wirtsmaterials mit den Lanthanoidionen mittels zeitaufgelöster Lumineszenzspektroskopie untersucht. Zeitaufgelöste Emissionsspektren (TRES) liefern dabei sowohl Informationen in der Wellenlängen- als auch in der Zeitdomäne. Erstmalig wurden die TRES mittels einer umfangreichen Auswertemethodik behandelt. Neben der Anpassung des Abklingverhaltens mit einer diskreten Zahl von Exponentialfunktionen, wurden unterstützend auch Abklingzeitverteilungsanalysen durchgeführt. Zeitaufgelöste flächennormierte Emissionsspektren (TRANES), eine Erweiterung der normalen TRES, konnten erstmals zur Bestimmung der Zahl der emittierenden Lanthanoidspezies in porösen Materialien genutzt werden. Durch die Berechnung der Decayassoziierten Spektren (DAS) konnten den Lanthanoidspezies die entsprechenden Lumineszenzspektren zugeordnet werden. Zusätzlich konnte, speziell im Fall der Europium-Lumineszenz, durch Kombination von zeitlicher und spektraler Information das zeitabhängige Asymmetrieverhältnis R und die spektrale Evolution des 5D0-7F0-Übergangs mit der Zeit t untersucht und somit wesentliche Informationen über die Verteilung der Europiumionen im Wirtsmaterial erhalten werden. Über die Abklingzeit und das Asymmetrieverhältnis R konnten Rückschlüsse auf die Zahl der OH-Oszillatoren in der ersten Koordinationssphäre und die Symmetrie der Koordinationsumgebung gezogen werden. Für die mikroporösen und mikroporös-mesoporösen Materialien wurden verschiedene Lanthanoidspezies, im Regelfall zwei, gefunden, welche entsprechend der beschriebenen Methoden charakterisiert wurden. Diese Lanthanoidspezies konnten Positionen in den Materialien zugeordnet werden, die sich im tief Inneren des Porensystems oder auf bzw. nahe der äußeren Oberfläche oder in den Mesoporen befinden. Erstere Spezies ist aufgrund ihrer Position im Material gut vor Feuchtigkeitseinflüssen geschützt, was sich deutlich in entsprechend langen Lumineszenzabklingzeiten äußert. Zusätzlich ist diese Europiumspezies durch unsymmetrische Koordinationsumgebung charakterisiert, was auf einen signifikanten Anteil an Koordination der Lanthanoidionen durch die Sauerstoffatome im Wirtsgitter zurückzuführen ist. Ionen, die sich nahe oder auf der äußeren Oberfläche befinden, sind dagegen für Feuchtigkeit zugänglicher, was in kürzeren Lumineszenzabklingzeiten und einer symmetrischeren Koordinationsumgebung resultiert. Der Anteil von Wassermolekülen in der ersten Koordinationssphäre ist hier deutlich größer, als bei den Ionen, die sich tiefer im Porensystem befinden und entspricht in vielen Fällen der Koordinationszahl eines vollständig hydratisierten Lanthanoidions. Auch der Einfluss von Oberflächenmodifikationen auf die Speziesverteilung und das Verhalten der Materialien gegenüber Feuchtigkeit wurde untersucht. Dabei gelang es den Einfluss der Feuchtigkeit auf die Lumineszenzeigenschaften und die Speziesverteilung durch die Oberflächenmodifikation zu verringern und die Lumineszenzeigenschaften teilweise zu konservieren. Im Fall der mesoporösen Silikamonolithe wurde auch eine heterogene Verteilung der Lanthanoidionen im Porensystem gefunden. Hier wechselwirkt ein Teil der Ionen mit der Porenwand, während sich die restlichen Ionen in der wäßrigen Phase innerhalb des Porensystems aufhalten. Das Aufbringen von Oberflächenmodifikationen führte zu einer Wechselwirkung der Ionen mit diesen Oberflächenmodifikationen, was sich in Abhängigkeit von der Oberflächenbeladung in den enstprechenden Lumineszenzeigenschaften niederschlug.
In the present thesis, the self-assembly of multi thermoresponsive block copolymers in dilute aqueous solution was investigated by a combination of turbidimetry, dynamic light scattering, TEM measurements, NMR as well as fluorescence spectroscopy. The successive conversion of such block copolymers from a hydrophilic into a hydrophobic state includes intermediate amphiphilic states with a variable hydrophilic-to-lipophilic balance. As a result, the self-organization is not following an all-or-none principle but a multistep aggregation in dilute solution was observed. The synthesis of double thermoresponsive diblock copolymers as well as triple thermoresponsive triblock copolymers was realized using twofold-TMS labeled RAFT agents which provide direct information about the average molar mass as well as residual end group functionality from a routine proton NMR spectrum. First a set of double thermosensitive diblock copolymers poly(N-n-propylacrylamide)-b-poly(N-ethylacrylamide) was synthesized which differed only in the relative size of the two blocks. Depending on the relative block lengths, different aggregation pathways were found. Furthermore, the complementary TMS-labeled end groups served as NMR-probes for the self-assembly of these diblock copolymers in dilute solution. Reversible, temperature sensitive peak splitting of the TMS-signals in NMR spectroscopy was indicative for the formation of mixed star-/flower-like micelles in some cases. Moreover, triple thermoresponsive triblock copolymers from poly(N-n-propylacrylamide) (A), poly(methoxydiethylene glycol acrylate) (B) and poly(N-ethylacrylamide) (C) were obtained from sequential RAFT polymerization in all possible block sequences (ABC, BAC, ACB). Their self-organization behavior in dilute aqueous solution was found to be rather complex and dependent on the positioning of the different blocks within the terpolymers. Especially the localization of the low-LCST block (A) had a large influence on the aggregation behavior. Above the first cloud point, aggregates were only observed when the A block was located at one terminus. Once placed in the middle, unimolecular micelles were observed which showed aggregation only above the second phase transition temperature of the B block. Carrier abilities of such triple thermosensitive triblock copolymers tested in fluorescence spectroscopy, using the solvatochromic dye Nile Red, suggested that the hydrophobic probe is less efficiently incorporated by the polymer with the BAC sequence as compared to ABC or ACB polymers above the first phase transition temperature. In addition, due to the problem of increasing loss of end group functionality during the subsequent polymerization steps, a novel concept for the one-step synthesis of multi thermoresponsive block copolymers was developed. This allowed to synthesize double thermoresponsive di- and triblock copolymers in a single polymerization step. The copolymerization of different N-substituted maleimides with a thermosensitive styrene derivative (4-vinylbenzyl methoxytetrakis(oxyethylene) ether) led to alternating copolymers with variable LCST. Consequently, an excess of this styrene-based monomer allowed the synthesis of double thermoresponsive tapered block copolymers in a single polymerization step.