Refine
Has Fulltext
- yes (29) (remove)
Year of publication
- 2019 (29) (remove)
Document Type
- Doctoral Thesis (17)
- Postprint (12)
Is part of the Bibliography
- yes (29)
Keywords
- diffusion (3)
- Magnetisierungsdynamik (2)
- Spektroskopie (2)
- Sternentwicklung (2)
- Synchronisation (2)
- anomalous diffusion (2)
- interface engineering (2)
- roughness (2)
- spectroscopy (2)
- Astronomie (1)
Institute
- Institut für Physik und Astronomie (29) (remove)
Kosmologie beschreibt die Entwicklung des Universums als Ganzes. Kosmologische Entdeckungen in Theorie und Praxis haben daher unser modernes wissenschaftliches Weltbild entscheidend geprägt. Die Vermittlung eines modernen Weltbildes durch Unterricht ist ein häufiger Wunsch in der naturwissenschaftlichen Bildungsdiskussion. Dennoch existieren weiterhin Forschungs- und Entwicklungsbedarfe. Kosmologische Themen finden sich häufig in den Medien und sind gleichzeitig weiter vom Alltag entfernt, so dass sich hier besonders leicht wissenschaftlich inkorrekte Vorstellungen entwickeln können, die zu Problemen im Unterricht führen können.
Das Ziel dieser wissenschaftlichen Arbeit ist es, zu diesem Forschungsgebiet beizutragen und die Voraussetzungen hinsichtlich vorhandener Vorkenntnisse und Präkonzepte in Kosmologie, mit denen Schülerinnen und Schüler in den Unterricht kommen, zu untersuchen und anschließend mit denen anderer Länder zu vergleichen. Dies erfolgt anhand einer qualitativen Inhaltsanalyse eines offenen Fragebogens. Auf dieser Grundlage wird schließlich ein Multiple-Choice Fragebogen entwickelt, angewendet und evaluiert.
Die Ergebnisse zeigen große Wissenslücken im Bereich der Kosmologie auf und geben erste Hinweise auf vorhandene Unterschiede zwischen den Ländern. Es existieren ebenfalls einige teils weit verbreitete wissenschaftlich inkorrekte Vorstellungen wie beispielsweise die Assoziation des Urknalls mit einer Explosion, der Urknall verursacht durch eine Kollision von Teilchen oder größeren Objekten, oder die Vorstellung der Ausdehnung des Universums als neue Entdeckungen und/oder Wissen. Des Weiteren gab nur etwa jeder Fünfte das korrekte Alter des Universums oder die Ausdehnung des Universums als einen der drei Belege der Urknalltheorie an, während fast 40% keinen einzigen Beleg nennen konnten. Für den geschlossenen Fragebogen konnten gute Hinweise für verschiedene Validitätsaspekte herausgearbeitet werden und es existieren erste Hinweise darauf, dass der Fragebogen Wissenszuwachs messen kann und damit wahrscheinlich zur Untersuchung der Wirksamkeit von Lerneinheiten eingesetzt werden kann. Auch ein entsprechendes Modell zur Verständnisentwicklung der Ausdehnung des Universums zeigte sich vielversprechend.
Diese Arbeit liefert insgesamt einen Forschungsbeitrag zum Schülervorwissen und Vorstellungen in der Kosmologie und deren Large Scale Assessment. Dies eröffnet die Möglichkeit zukünftiger Forschungen im Bereich von Gruppenvergleichen insbesondere hinsichtlich objektiver Ländervergleiche sowie der Untersuchungen der Wirksamkeit von einzelnen Lerneinheiten als auch Vergleiche verschiedener Lerneinheiten untereinander.
Carbonfasern haben sich in der Luft- und Raumfahrt etabliert und gewinnen in Alltagsanwendungen wie dem Automobilbereich, Windkraft- und Sportbereich durch ihre hohen Zugfestigkeiten, insbesondere ihrer hohen E-Moduli, und ihrer geringen Dichte immer mehr an Bedeutung. Auf Grund ihrer hohen Kosten, welche sich zur Hälfte aus der Precursorherstellung, inklusive seiner Synthese und seinem Verspinnprozess, dem Lösungsspinnverfahren, ergeben, erhalten zunehmend alternative und schmelzspinnbare Precursoren Interesse. Für die Carbonfaserherstellung wird fast ausschließlich Polyacrylnitril (PAN) verwendet, das vor dem Schmelzen irreversible exotherme Zyklisierungsreaktionen aufweist, welchen sich seine Zersetzung anschließt. Eine Möglichkeit der Reduzierung der Schmelztemperatur von Polymeren ist die Einbringung von Comonomeren zur Erhöhung des freien Volumens und die Reduzierung der intermolekularen Wechselwirkungen als interne Weichmacher. Wie am Fraunhofer IAP gezeigt wurde, kann mittels 2-Methoxyethylacrylat (MEA) die Schmelztemperatur zu neuartigen PAN-basierten Precursoren verringert werden. Um den PAN-co-MEA-Precursor für die nachfolgenden Prozessschritte der Carbonfaserherstellung zu verwenden, müssen die thermoplastischen Fasern in thermisch stabile Fasern ohne thermoplastisches Verhalten überführt werden. Es wurde ein neuer Prozessschritt (Prästabilisierung) eingeführt, welcher unter alkalischen Bedingungen zur Abspaltung der Comonomerseitenkette führt. Neben der Esterhydrolyse finden Reaktionen statt, welche an diesem Material noch nicht hinreichend untersucht wurden. Weiterhin stellt sich die Frage nach der Kinetik der Prästabilisierung und der Ermittlung einer geeigneten Prozessführung.
Hierzu wurde die Prästabilisierung in den Labormaßstab überführt und die möglichen Zusammensetzungen des aus DMSO und einer KOH-Lösung bestehenden Reaktionsmediums evaluiert. Weiterhin wurde die Behandlung bei verschiedenen Prästabilisierungszeiten von maximal 30 min und Temperaturen von 40, 50 und 60 °C durchgeführt, um primär mittels NMR-Spektroskopie die chemischen Strukturänderungen aufzuklären. Die Esterhydrolyse des Comonomers, welche zur Abspaltung des 2-Methoxyethanols führt, wurde mittels 1H-NMR-spektroskopischer Untersuchungen detektiert.
Es wurde ein Modell aufgestellt, das die chemisch-physikalischen Strukturänderungen während der Prästabilisierung aufzeigt. Die zuerst ablaufende Reaktion ist die Esterhydrolyse am Comonomer, welche vom Faserrand nach innen verläuft und durch die Präsenz des DMSO in Kombination mit der KOH-Lösung (Superbase) initiiert wird. Der zeitliche Reaktionsverlauf der Esterhydrolyse kann in drei Bereiche eingeteilt werden. Der erste Bereich ab dem Prästabilisierungsbeginn wird durch die Diffusion der basischen Anionen in die Faser, der zweite Bereich durch die Reaktion an der Estergruppe des Comonomers und der dritte Bereich durch letzte Reaktionen im Faserinneren und diffusiven Prozessen der Produkte und Edukte charakterisiert. Der zweite Bereich kann mit einer Reaktion pseudo 1. Ordnung abgebildet werden, da in diesem Bereich bereits eine ausreichende Diffusion der Edukte in die Faser stattgefunden hat. Bei 50 °C spielt die Diffusion im ersten Bereich im Vergleich zur Reaktion eine untergeordnete Rolle. Mit Erhöhung der Temperatur auf 60 °C kann eine im Verhältnis geringere Diffusions- als Reaktionsgeschwindigkeit beobachtet werden. Die Nebenreaktionen wurden mittels 13C-CP/MAS-NMR-spektroskopischen, elementaranlaytischen Untersuchungen sowie Doppelbrechungsmessungen charakterisiert. Während der alkalischen Esterhydrolyse beginnt die Reduzierung der Nitrilgruppen unter der Bildung von primären Carbonsäureamiden und Carbonsäuren. Zur Beschreibung dieser Umsetzung wurde eine Methode entwickelt, welche die Addition von 13C-CP/MAS-NMR-Spektren der Modellsubstanzen PAN, PAM und PAA beinhaltet. Weitere stattfindende Reaktionen sind die Bildung von konjugierten Doppelbindungen, welche insbesondere auf eine Zyklisierung der Nitrile hinweisen. Die nasschemisch initiierte Zyklisierung der Nitrilgruppen kann zu kürzeren Stabilisierungszeiten und einem besser kontrollierbaren Stabilisierungsprozess durch geringere Wärmefreisetzung und schlussendlich zu einer Kostenersparnis des gesamten Verfahrens führen. Die Umsetzung der Nitrilgruppen konnte mit einer Reaktion pseudo 1. Ordnung gut abgebildet werden. DMSO initiiert die Esterhydrolyse, wobei die KOH-Konzentration einen höheren Einfluss auf die Reaktionsgeschwindigkeit der Ester- und Nitrilhydrolyse als die DMSO-Konzentration besitzt. Beide Reaktionen zeigen eine vergleichbare Abhängigkeit von der Temperatur. Die Erhöhung der Prästabilisierungszeit und der KOH- bzw. DMSO-Konzentration führt zur Migration niedermolekularer Bestandteile des Fasermaterials an die Oberfläche und der Bildung punktueller Ablagerungen bis hin zu miteinander verbundenen Einzelfasern. Eine weitere Erhöhung der Prästabilisierungszeit bzw. der Konzentration führt zu einem steigenden Carbonsäureanteil und zur Quellung des Fasermaterials, wodurch die Ablagerungen in das Reaktionsmedium diffundieren. Die Ablagerungen enthalten Chlor, welches durch den Waschvorgang mit HCl in das Materialsystem gelangt ist und durch Parameteranpassungen reduziert wurde. Die schmelzbaren Fasern konnten durch die Prästabilisierung erfolgreich über eine Kern-Mantel-Struktur in nicht-thermoplastische Fasern überführt werden.
Zur Ermittlung eines geeigneten Prozessfensters für nachfolgende thermische Beanspruchungen der prästabilisierten Fasern wurden drei Kriterien identifiziert, anhand welcher die Evaluation erfolgte. Das erste Kriterium beinhaltet die Notwendigkeit der vollständigen Aufhebung der thermoplastischen Eigenschaft der Fasern. Als zweites Kriterium diente die Fasermorphologie. Anhand von REM-Aufnahmen wurden Faserbündel mit separierten Einzelfasern ohne Ablagerungen für die nachfolgende Stabilisierung ausgewählt. Das dritte Kriterium bezieht sich auf eine möglichst geringe Umsetzung der Nitrilgruppen, um Prästabilisierungsbedingungen mit Nebenreaktionen zu vermeiden.
Aus den Untersuchungen konnte eine Prästabilisierungstemperatur von 60 °C als geeignet identifiziert werden. Weiterhin führen hoch alkalische Zusammensetzungen des Reaktionsmediums mit KOH-Konzentrationen von 1, 1,5 und 2 M, vorzugsweise 1,5 M und 50 vol% DMSO mit Reaktionszeiten von unter 10 min zu geeigneten Fasern. Ein MEA-Anteil unterhalb von 2 mol% bewirkt eine Überführung in die Unschmelzbarkeit. Thermisch stabile und für die nachfolgende Stabilisierung geeignete Fasern besitzen weiterhin 68 – 80 mol% Nitrilgruppen, 20 – 25 mol% Carbonsäuren, bis zu 15 mol% primäre Carbonsäureamide und zyklisierte Strukturen.
A reliable inference of networks from data is of key interest in many scientific fields. Several methods have been suggested in the literature to reliably determine links in a network. These techniques rely on statistical methods, typically controlling the number of false positive links, but not considering false negative links. In this thesis new methodologies to improve network inference are suggested. Initial analyses demonstrate the impact of falsepositive and false negative conclusions about the presence or absence of links on the resulting inferred network. Consequently, revealing the importance of making well-considered choices leads to suggest new approaches to enhance existing network reconstruction methods.
A simulation study, presented in Chapter 3, shows that different values to balance false positive and false negative conclusions about links should be used in order to reliably estimate network characteristics. The existence of type I and type II errors in the reconstructed network, also called biased network, is accepted. Consequently, an analytic method that describes the influence of these two errors on the network structure is explored. As a result of this analysis, an analytic formula of the density of the biased vertex degree distribution is found (Chapter 4).
In the inverse problem, the vertex degree distribution of the true underlying network is analytically reconstructed, assuming the probabilities of type I and type II errors. Chapters 4-5 show that the method is robust to incorrect estimates of α and β within reasonable limits. In Chapter 6, an iterative procedure to enhance this method is presented in the case of large errors on the estimates of α and β.
The investigations presented so far focus on the influence of false positive and false negative links on the network characteristics. In Chapter 7, the analysis is reversed - the study focuses on the influence of network characteristics on the probability of type I and type II errors, in the case of networks of coupled oscillators. The probabilities of α and β are influenced by the shortest path length and the detour degree, respectively. These results have been used to improve the network reconstruction, when the true underlying network is not known a priori, introducing a novel and advanced concept of threshold.
Oscillatory systems under weak coupling can be described by the Kuramoto model of phase oscillators. Kuramoto phase oscillators have diverse applications ranging from phenomena such as communication between neurons and collective influences of political opinions, to engineered systems such as Josephson Junctions and synchronized electric power grids. This thesis includes the author's contribution to the theoretical framework of coupled Kuramoto oscillators and to the understanding of non-trivial N-body dynamical systems via their reduced mean-field dynamics.
The main content of this thesis is composed of four parts. First, a partially integrable theory of globally coupled identical Kuramoto oscillators is extended to include pure higher-mode coupling. The extended theory is then applied to a non-trivial higher-mode coupled model, which has been found to exhibit asymmetric clustering. Using the developed theory, we could predict a number of features of the asymmetric clustering with only information of the initial state provided.
The second part consists of an iterated discrete-map approach to simulate phase dynamics. The proposed map --- a Moebius map --- not only provides fast computation of phase synchronization, it also precisely reflects the underlying group structure of the dynamics. We then compare the iterated-map dynamics and various analogous continuous-time dynamics. We are able to replicate known phenomena such as the synchronization transition of the Kuramoto-Sakaguchi model of oscillators with distributed natural frequencies, and chimera states for identical oscillators under non-local coupling.
The third part entails a particular model of repulsively coupled identical Kuramoto-Sakaguchi oscillators under common random forcing, which can be shown to be partially integrable. Via both numerical simulations and theoretical analysis, we determine that such a model cannot exhibit stationary multi-cluster states, contrary to the numerical findings in previous literature. Through further investigation, we find that the multi-clustering states reported previously occur due to the accumulation of discretization errors inherent in the integration algorithms, which introduce higher-mode couplings into the model. As a result, the partial integrability condition is violated.
Lastly, we derive the microscopic cross-correlation of globally coupled non-identical Kuramoto oscillators under common fluctuating forcing. The effect of correlation arises naturally in finite populations, due to the non-trivial fluctuations of the meanfield. In an idealized model, we approximate the finite-sized fluctuation by a Gaussian white noise. The analytical approximation qualitatively matches the measurements in numerical experiments, however, due to other periodic components inherent in the fluctuations of the mean-field there still exist significant inconsistencies.
In the scenario of the narrow escape problem (NEP) a particle diffuses in a finite container and eventually leaves it through a small 'escape window' in the otherwise impermeable boundary, once it arrives to this window and crosses an entropic barrier at the entrance to it. This generic problem is mathematically identical to that of a diffusion-mediated reaction with a partially-reactive site on the container's boundary. Considerable knowledge is available on the dependence of the mean first-reaction time (FRT) on the pertinent parameters. We here go a distinct step further and derive the full FRT distribution for the NEP. We demonstrate that typical FRTs may be orders of magnitude shorter than the mean one, thus resulting in a strong defocusing of characteristic temporal scales. We unveil the geometry-control of the typical times, emphasising the role of the initial distance to the target as a decisive parameter. A crucial finding is the further FRT defocusing due to the barrier, necessitating repeated escape or reaction attempts interspersed with bulk excursions. These results add new perspectives and offer a broad comprehension of various features of the by-now classical NEP that are relevant for numerous biological and technological systems.
Fractional Brownian motion (FBM) is a Gaussian stochastic process with stationary, long-time correlated increments and is frequently used to model anomalous diffusion processes. We study numerically FBM confined to a finite interval with reflecting boundary conditions. The probability density function of this reflected FBM at long times converges to a stationary distribution showing distinct deviations from the fully flat distribution of amplitude 1/L in an interval of length L found for reflected normal Brownian motion. While for superdiffusion, corresponding to a mean squared displacement (MSD) 〈X² (t)〉 ⋍ tᵅ with 1 < α < 2, the probability density function is lowered in the centre of the interval and rises towards the boundaries, for subdiffusion (0 < α < 1) this behaviour is reversed and the particle density is depleted close to the boundaries. The MSD in these cases at long times converges to a stationary value, which is, remarkably, monotonically increasing with the anomalous diffusion exponent α. Our a priori surprising results may have interesting consequences for the application of FBM for processes such as molecule or tracer diffusion in the confines of living biological cells or organelles, or other viscoelastic environments such as dense liquids in microfluidic chambers.
In this paper we report on photoswitchable polymer surfaces with dynamically and reversibly fluctuating topographies. It is well known that when azobenzene containing polymer films are irradiated with optical interference patterns the film topography changes to form a surface relief grating. In the simplest case, the film shape mimics the intensity distribution and deforms into a wave like, sinusoidal manner with amplitude that may be as large as the film thickness. This process takes place in the glassy state without photo-induced softening. Here we report on an intriguing discovery regarding the formation of reliefs under special illumination conditions. We have developed a novel setup combining the optical part for creating interference patterns, an AFM for in situ acquisition of topography changes and diffraction efficiency signal measurements. In this way we demonstrate that these gratings can be “set in motion” like water waves or dunes in the desert. We achieve this by applying repetitive polarization changes to the incoming interference pattern. Such light responsive surfaces represent the prerequisite for providing practical applications ranging from conveyer or transport systems for adsorbed liquid objects and colloidal particles to generation of adaptive and dynamic optical devices.
Membrane adhesion is a fundamental biological process in which membranes are attached to neighboring membranes or surfaces. Membrane adhesion emerges from a complex interplay between the binding of membrane-anchored receptors/ligands and the membrane properties. In this work, we study membrane adhesion mediated by lipid-anchored saccharides using microsecond-long full-atomistic molecular dynamics simulations. Motivated by neutron scattering experiments on membrane adhesion via lipid-anchored saccharides, we investigate the role of LeX, Lac1, and Lac2 saccharides and membrane fluctuations in membrane adhesion.
We study the binding of saccharides in three different systems: for saccharides in water, for saccharides anchored to essentially planar membranes at fixed separations, and for saccharides anchored to apposing fluctuating membranes. Our simulations of two saccharides in water indicate that the saccharides engage in weak interactions to form dimers. We find that the binding occurs in a continuum of bound states instead of a certain number of well-defined bound structures, which we term as "diffuse binding".
The binding of saccharides anchored to essentially planar membranes strongly depends on separation of the membranes, which is fixed in our simulation system. We show that the binding constants for trans-interactions of two lipid-anchored saccharides monotonically decrease with increasing separation. Saccharides anchored to the same membrane leaflet engage in cis-interactions with binding constants comparable to the trans-binding constants at the smallest membrane separations. The interplay of cis- and trans-binding can be investigated in simulation systems with many lipid-anchored saccharides. For Lac2, our simulation results indicate a positive cooperativity of trans- and cis-binding. In this cooperative binding the trans-binding constant is enhanced by the cis-interactions. For LeX, in contrast, we observe no cooperativity between trans- and cis-binding. In addition, we determine the forces generated by trans-binding of lipid-anchored saccharides in planar membranes from the binding-induced deviations of the lipid-anchors. We find that the forces acting on trans-bound saccharides increase with increasing membrane separation to values of the order of 10 pN.
The binding of saccharides anchored to the fluctuating membranes results from an interplay between the binding properties of the lipid-anchored saccharides and membrane fluctuations. Our simulations, which have the same average separation of the membranes as obtained from the neutron scattering experiments, yield a binding constant larger than in planar membranes with the same separation. This result demonstrates that membrane fluctuations play an important role at average membrane separations which are seemingly too large for effective binding. We further show that the probability distribution of the local separation can be well approximated by a Gaussian distribution. We calculate the relative membrane roughness and show that our results are in good agreement with the roughness values reported from the neutron scattering experiments.
Advancing charge selective contacts for efficient monolithic perovskite-silicon tandem solar cells
(2019)
Hybrid organic-inorganic perovskites are one of the most promising material classes for photovoltaic energy conversion. In solar cells, the perovskite absorber is sandwiched between n- and p-type contact layers which selectively transport electrons and holes to the cell’s cathode and anode, respectively. This thesis aims to advance contact layers in perovskite solar cells and unravel the impact of interface and contact properties on the device performance. Further, the contact materials are applied in monolithic perovskite-silicon heterojunction (SHJ) tandem solar cells, which can overcome the single junction efficiency limits and attract increasing attention. Therefore, all contact layers must be highly transparent to foster light harvesting in the tandem solar cell design. Besides, the SHJ device restricts processing temperatures for the selective contacts to below 200°C.
A comparative study of various electron selective contact materials, all processed below 180°C, in n-i-p type perovskite solar cells highlights that selective contacts and their interfaces to the absorber govern the overall device performance. Combining fullerenes and metal-oxides in a TiO2/PC60BM (phenyl-C60-butyric acid methyl ester) double-layer contact allows to merge good charge extraction with minimized interface recombination. The layer sequence thereby achieved high stabilized solar cell performances up to 18.0% and negligible current-voltage hysteresis, an otherwise pronounced phenomenon in this device design. Double-layer structures are therefore emphasized as a general concept to establish efficient and highly selective contacts.
Based on this success, the concept to combine desired properties of different materials is transferred to the p-type contact. Here, a mixture of the small molecule Spiro-OMeTAD [2,2’,7,7’-tetrakis(N,N-di-p-methoxyphenylamine)-9,9’-spirobifluoren] and the doped polymer PEDOT [poly(3,4-ethylenedioxythiophene)] is presented as a novel hole selective contact. PEDOT thereby remarkably suppresses charge recombination at the perovskite surface, allowing an increase of quasi-Fermi level splitting in the absorber. Further, the addition of Spiro-OMeTAD into the PEDOT layer is shown to enhance charge extraction at the interface and allow high efficiencies up to 16.8%.
Finally, the knowledge on contact properties is applied to monolithic perovskite-SHJ tandem solar cells. The main goal is to optimize the top contact stack of doped Spiro-OMeTAD/molybdenum oxide(MoOx)/ITO towards higher transparency by two different routes. First, fine-tuning of the ITO deposition to mitigate chemical reduction of MoOx and increase the transmittance of MoOx/ITO stacks by 25%. Second, replacing Spiro-OMeTAD with the alternative hole transport materials PEDOT/Spiro-OMeTAD mixtures, CuSCN or PTAA [poly(triaryl amine)]. Experimental results determine layer thickness constrains and validate optical simulations, which subsequently allow to realistically estimate the respective tandem device performances. As a result, PTAA represents the most promising replacement for Spiro-OMeTAD, with a projected increase of the optimum tandem device efficiency for the herein used architecture by 2.9% relative to 26.5% absolute. The results also reveal general guidelines for further performance gains of the technology.
Most of the matter in the universe consists of hydrogen. The hydrogen in the intergalactic medium (IGM), the matter between the galaxies, underwent a change of its ionisation state at the epoch of reionisation, at a redshift roughly between 6>z>10, or ~10^8 years after the Big Bang. At this time, the mostly neutral hydrogen in the IGM was ionised but the source of the responsible hydrogen ionising emission remains unclear. In this thesis I discuss the most likely candidates for the emission of this ionising radiation, which are a type of galaxy called Lyman alpha emitters (LAEs). As implied by their name, they emit Lyman alpha radiation, produced after a hydrogen atom has been ionised and recombines with a free electron. The ionising radiation itself (also called Lyman continuum emission) which is needed for this process inside the LAEs could also be responsible for ionising the IGM around those galaxies at the epoch of reionisation, given that enough Lyman continuum escapes. Through this mechanism, Lyman alpha and Lyman continuum radiation are closely linked and are both studied to better understand the properties of high redshift galaxies and the reionisation state of the universe.
Before I can analyse their Lyman alpha emission lines and the escape of Lyman continuum emission from them, the first step is the detection and correct classification of LAEs in integral field spectroscopic data, specifically taken with the Multi-Unit Spectroscopic Explorer (MUSE). After detecting emission line objects in the MUSE data, the task of classifying them and determining their redshift is performed with the graphical user interface QtClassify, which I developed during the work on this thesis. It uses the strength of the combination of spectroscopic and photometric information that integral field spectroscopy offers to enable the user to quickly identify the nature of the detected emission lines. The reliable classification of LAEs and determination of their redshifts is a crucial first step towards an analysis of their properties.
Through radiative transfer processes, the properties of the neutral hydrogen clouds in and around LAEs are imprinted on the shape of the Lyman alpha line. Thus after identifying the LAEs in the MUSE data, I analyse the properties of the Lyman alpha emission line, such as the equivalent width (EW) distribution, the asymmetry and width of the line as well as the double peak fraction. I challenge the common method of displaying EW distributions as histograms without taking the limits of the survey into account and construct a more independent EW distribution function that better reflects the properties of the underlying population of galaxies. I illustrate this by comparing the fraction of high EW objects between the two surveys MUSE-Wide and MUSE-Deep, both consisting of MUSE pointings (each with the size of one square arcminute) of different depths. In the 60 MUSE-Wide fields of one hour exposure time I find a fraction of objects with extreme EWs above EW_0>240A of ~20%, while in the MUSE-Deep fields (9 fields with an exposure time of 10 hours and one with an exposure time of 31 hours) I find a fraction of only ~1%, which is due to the differences in the limiting line flux of the surveys. The highest EW I measure is EW_0 = 600.63 +- 110A, which hints at an unusual underlying stellar population, possibly with a very low metallicity.
With the knowledge of the redshifts and positions of the LAEs detected in the MUSE-Wide survey, I also look for Lyman continuum emission coming from these galaxies and analyse the connection between Lyman continuum emission and Lyman alpha emission. I use ancillary Hubble Space Telescope (HST) broadband photometry in the bands that contain the Lyman continuum and find six Lyman continuum leaker candidates. To test whether the Lyman continuum emission of LAEs is coming only from those individual objects or the whole population, I select LAEs that are most promising for the detection of Lyman continuum emission, based on their rest-frame UV continuum and Lyman alpha line shape properties. After this selection, I stack the broadband data of the resulting sample and detect a signal in Lyman continuum with a significance of S/N = 5.5, pointing towards a Lyman continuum escape fraction of ~80%. If the signal is reliable, it strongly favours LAEs as the providers of the hydrogen ionising emission at the epoch of reionisation and beyond.