Refine
Has Fulltext
- no (145)
Year of publication
Document Type
- Article (143)
- Monograph/Edited Volume (2)
Is part of the Bibliography
- yes (145) (remove)
Keywords
- Detector modelling and simulations II (electric fields, charge transport, multiplication and induction, pulse formation, electron emission, etc) (1)
- Energy-dispersive Laue diffraction (1)
- Interaction of radiation with matter (1)
- Solid state detectors (1)
- X-ray imaging (1)
- X-ray spectroscopy (1)
- pnCCD (1)
Institute
Temperature dependent energy-dispersive X-ray diffraction and magnetic study of Fe/Al interface
(2007)
In situ temperature dependent energy-dispersive structural and magnetic study of electron beam evaporated Fe/Al multilayer sample (MLS) has been investigated. The structural studies show the formation of an intermixed FeAl transition layer of a few nanometers thick at the interface during deposition, which on annealing at 300 degrees C transforms to B2FeAl intermetallic phase. Magnetization decreases with increase in temperature and drops to minimum above 300 degrees C due to increase in anti-ferromagnetic interlayer coupling and formation of nonmagnetic FeAl phase at the interface. The Curie temperature (T-c) is found to be 288 degrees C and is much less than that of bulk bcc Fe.
The development of surface relief and density patterns in azobenzene polymer films was studied by diffraction at two different wavelengths. We used x-ray diffraction of synchrotron radiation at 0.124 nm in combination with visible light diffraction at a wavelength of 633 nm. In contrast to visible light scattering x-ray diffraction allows the separation of a surface relief and a density grating contribution due to the different functional dependence of the scattering power. Additionally, the x-ray probe is most sensitive for the onset of the surface grating formation
For the first time, site-selective distortion has been investigated for two different structural units in the ternary compound alpha-GaPO4 under the influence of a permanent external electric field. Based on 54 measured reflection intensities, the electric-field-induced distortion of PO4 and GaO4 tetrahedra in alpha-GaPO4 crystals is evaluated using a model of pseudoatomic displacements introduced recently [Gorfman, Tsirelson & Pietsch (2005). Acta Cryst. A61, 387- 396]. A stronger variation of the P-O bond lengths in the PO4 tetrahedron was found compared to the bonds in the GaO4 tetrahedron. The different distortions of the tetrahedra owing to the electric field were analysed in terms of the valence charge density of alpha-GaPO4 and its topological characteristics. The larger charge of the P pseudoatom compared to the Ga atom was recognized as the main reason for the higher sensitivity of the PO4 tetrahedron to a permanent external electric field
Recently, two different groups have reported independently that the mobility of field-effect transistors made from regioregular poly(3-hexylthiophene) (P3HT) increases strongly with molecular weight. Two different models were presented: one proposing carrier trapping at grain boundaries and the second putting emphasis on the conformation and packing of the polymer chains in the thin layers for different molecular weights. Here, we present the results of detailed investigations of powders and thin films of deuterated P3HT fractions with different molecular weight. For powder samples, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) were used to investigate the structure and crystallization behavior of the polymers. The GPC investigations show that all weight fractions possess a rather broad molecular weight distribution. DSC measurements reveal a strong decrease of the crystallization temperature and, most important, a significant decrease of the degree of crystallinity with decreasing molecular weight. To study the structure of thin layers in lateral and vertical directions, both transmission electron microscopy (TEM) and X-ray grazing incidence diffraction (GID) were utilized. These methods show that thin layers of the low molecular weight fraction consist of well-defined crystalline domains embedded in a disordered matrix. We propose that the transport properties of layers prepared from fractions of poly(3-hexylthiophene) with different molecular weight are largely determined by the crystallinity of the samples and not by the perfection of the packing of the chains in the individual crystallites
A detailed structural analysis of a Langmuir-Blodgett (LB) multilayer composed of a polyelectrolyte-amphiphile complex (PAC) is presented. The PAC is self-assembled from metal ions, ditopic bis-terpyridines, and amphiphiles. The vertical structure of the LB multilayer is investigated by X-ray reflectometry. The multilayer has a periodicity of 57 A, which corresponds to an architecture of flat lying metallo-supramolecular coordination polyelectrolyte (MEPE) rods and upright-standing amphiphiles (dihexadecyl phosphate, DHP). In-plane diffraction reveals hexagonal packing of the DHP molecules. Using extended X-ray absorption fine structure (EXAFS) experiments, we prove that the central metal ion is coordinated to the terpyridine moieties in a pseudo-octahedral coordination environment. The Fe-N bond distances are 1.82 and 2.0 angstrom, respectively. Temperature resolved measurements indicate a reversible phase transition in a temperature range up to 55 degrees C. EXAFS measurements indicate a lengthening of the average Fe-N bond distance from 1.91 to 1.95 angstrom. The widening of the coordination cage upon heating is expected to lower the ligand field stabilization, thus giving rise to spin transitions in these composite materials
The glass transition process gets affected in ultrathin films having thickness comparable to the size of the molecules. We observe systematic broadening of the glass transition temperature (T-g) as the thickness of an ultrathin polymer film reduces below the radius of gyration but the change in the average T-g was found to be very small. The existence of reversible negative and positive thermal expansion below and above T-g increased the sensitivity of our thickness measurements performed using energy-dispersive x-ray reflectivity. A simple model of the T-g variation as a function of depth expected from sliding motion could explain the results
Strain analysis of a laterally patterned Si-wafer was carried out utilizing X-ray grazing-incidence diffraction with synchrotron radiation. The lateral patterning was done by focused ion beam implantation using an ion source of liquid AuGeSi alloy. Samples were prepared by either 35 keV Au+ ions (dose: 0.2, 2 x 10(14) cm(-2)) or 70 keV Ge++ ions (dose: 8 X 10(14) cm(-1)). It was shown that due to implantation a periodical defect structure is created consisting of both implanted and not implanted stripes. The evaluated depth distribution of defects within the implanted stripes corresponds to that obtained by TRIM calculation. The induced strain distribution, however, shows no periodicity. This can be explained by an overlap of the strain fields created in each implanted stripe. (c) 2005 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
A phase transition in an amphiphilic mesophase is explored to deliberately induce mechanical strain in an assembly of tightly coupled metal ion coordination centers. Melting of the alkyl chains in the amphiphilic mesophase causes distortion of the coordination geometry around the central transition metal ion. As a result, the crystal field splitting of the d-orbital subsets decreases resulting in a spin transition from a low-spin to a high-spin state. The diamagnetic-paramagnetic transition is reversible. This concept is demonstrated in a metallo-supramolecular coordination polyelectrolyte-amphiphile complex self-assembled from ditopic bis-terpyridines, Fe(II) as central transition metal, and dialkyl phosphates as amphiphiles. The magnetic properties are studied in a Langmuir-Blodgett multilayer. The modularity of this concept provides extensive control of structure and function from molecular to macroscopic length scales and gives access to a wide range of new molecular magnetic architectures such as nanostructures, thin films, and liquid crystals
X-ray diffraction by a crystal in a permanent external electric field : general considerations
(2005)
The variations of X-ray diffraction intensities from a crystal in the presence of a permanent external electric field is modeled analytically using a first-order stationary perturbation theory. The change in a crystal, induced by an external electric field, is separated into two contributions. The first one is related to a pure polarization of an electron subsystem, while the second contribution can be reduced to the displacements of the rigid pseudoatoms from their equilibrium positions. It is shown that a change of the X-ray diffraction intensities mainly originates from the second contribution, while the influence of the pure polarization of a crystal electron subsystem is negligibly small. The quantities restored from an X-ray diffraction experiment in the presence of an external electric field were analyzed in detail in terms of a rigid pseudoatomic model of electron density and harmonic approximation for the atomic thermal motion. Explicit relationships are derived that link the properties of phonon spectra with E-field-induced variations of a structure factor, pseudoatomic displacements and piezoelectric strains. The displacements can be numerically estimated using a model of independent atomic motion if the Debye - Waller factors and pseudoatomic charges are known either from a previous single-crystal X-ray diffraction study or from density functional theory calculations. The above estimations can be used to develop an optimum strategy for a data collection that avoids the measurements of reflections insensitive to the electric-field-induced variations
Experiments at the bending magnet beamline at BESSY II (EDR beamline) profit from the excellent coherence properties of third generation synchrotron sources. Considering the exponentially decaying incident spectrum, and because no optical elements are installed except slits and vacuum windows, coherence experiments can be performed between 5 keV < E < 15 keV. First, the energy dependence of spatial coherence properties were determined measuring diffraction at single and double pinholes. Next, the coherent white radiation was used to probe the morphology of thin films in reflection geometry. The recorded intensity maps (reflectivity versus sample position) provide speckle patterns which reveal the locally varying sample morphology. Setting the incident angle, alpha(i), smaller or larger than the critical angle of total external reflection, alpha(c), one should be able to separate the surface height profile from the subsurface density modulation of a sample. The validity of this approach is verified at the example of reciprocal space maps taken from a polymer surface where we could reconstruct the lateral height profile from speckle data. (C) 2004 Elsevier B.V. All rights reserved