Refine
Has Fulltext
- no (22)
Document Type
- Article (19)
- Conference Proceeding (2)
- Monograph/Edited Volume (1)
Is part of the Bibliography
- yes (22)
Keywords
- radical polymerization (3)
- copolymerization (2)
- ) (1)
- EPR (1)
- ESR (1)
- atom transfer radical polymerization (ATRP) (1)
- block copolymers (1)
- fluorinated olefins (1)
- fluoropolymers (1)
- hexafluoropropene (1)
Institute
- Institut für Chemie (22)
Copolymerizations of vinylidene fluoride (VDF) and hexafluoropropene (HFP) were carried out in homogeneous phase with supercritical carbon dioxide up to complete VDF conversion using conventional peroxide initiators. The HFP monomer feed ratios, f(HFP), were varied between 0.65 and 0.20. Depending on f(HFP) amorphous or semi-crystalline copolymers were obtained. f(HFP) also determines the minimum pressure required to allow for homogeneous phase reactions. For example, HFP-rich copolymerizations in 70 wt.-% CO(2) at 100 degrees C require a pressure of around 500 bar. Further, bulk copolymerizations in homogenous phase were feasible for f(HFP) 0.65 at 900 bar up to complete VDF conversion. Copolymerizations in the presence of perfluorinated hexyl iodide carried out at 75 degrees C gave access to low dispersity polymers. Due to homogeneous phase conditions the use of any surfactants or fluorinated cosolvent is avoided.
Block copolymers of 1H,1H,2H,2H-perfluorodecyl acrylate (AC8) were obtained from ARGET ATRP. To obtain block copolymers of low dispersity the PAC8 block was synthesized in anisole with a CuBr(2)/PMDETA catalyst in the presence of tin(II) 2-ethylhexanoate as a reducing agent. The PAC8 block was subsequently used as macroinitiator for copolymerization with butyl and tert-butyl acrylate carried out in scCO(2). To achieve catalyst solubility in CO(2) two fluorinated ligands were employed. The formation of block copolymers was confirmed by size exclusion chromatography and DSC.
Individual rate coefficients for 1H,1H,2H,2H-tridecafluorooctyl methacrylate radical polymerizations
(2010)
Kinetic data for radical polymerizations of 1H,1H,2H,2H-tridecafluorooctyl methacrylate (TDFOMA) in bulk is reported. Pulsed laser initiated polymerizations yield propagation rate coefficients, k(p), which are by a factor of 1.9 higher than methyl methacrylate k(p). The activation energy of TDFOMA k(p) is not significantly different from that of alkyl methacrylates. Chain-length averaged termination rate coefficients were estimated from chemically initiated polymerizations with in-line FT-NIR spectroscopic monitoring of monomer conversion. Up to 30% of monomer conversion TDFOMA termination rate coefficients are only slightly below MMA low conversion values. The result is suggested to be due to less interactions between the macroradicals compared to nonfluorinated systems.
The surface of carbon black (CB) nanoparticles was functionalized with poly(vinylidene fluoride) (PVDF) either by trapping of macroradicals or by cycloaddition. PVDF with two iodine end groups (I-PVDF-I) obtained from iodine transfer polymerization in supercritical CO2 was heated in the presence of CB and the C-I bond was cleaved resulting in a reaction between the macroradical and the CB surface. To allow for cycloaddition of PVDF to the CB surface for a number of polymers, the iodine end groups were replaced by azide end groups. In addition, microwave irradiation was applied to the functionalization. The influence of temperature, time, polymer concentration, and polymer molar mass on the functionalization reaction was examined.
The iron-containing ionic liquid (IL) 1-butyl-3-methylimidazolium tetrachloroferrate(III) [Bmim][FeCl4] has been used as a building block in the synthesis of transparent, ion-conducting, and paramagnetic ionogels. UV/Vis spectroscopy shows that the coordination around the Fe(III) ion does slightly change upon incorporation of the IL into PMMA. The thermal stability of the PMMA increases significantly with IL incorporation. In particular, the onset weight loss observed at ca. 265 degrees C for pure PMMA is completely suppressed. The ionic conductivity shows a strong temperature dependence and increases with increasing IL weight fractions. The magnetic properties are similar to those reported for the pure IL and are not affected by the incorporation into the PMMA matrix. The resulting ionogel is thus an interesting prototype for soft, flexible, and transparent materials combining the mechanical properties of the matrix with the functionality of the metal-containing IL, such as magnetism.
The generation of nanoscale primary poly(vinylidene fluoride) (PVDF) particles by rapid expansion of supercritical solutions (RESS) is reported. The experimental results show that RESS enables the formation of PVDF particles with median particle diameters ranging from 56 to 226 nm and that the size of PVDF particles can be influenced by polymer properties. The particle size can be decreased either by increasing molar mass, in case of identical polymer end groups, or by increasing the degree of crystallinity, in case of similar molar mass and different end groups.
The influence of the reaction medium (organic solvents, water, ionic liquids, supercritical CO2) on the propagation rate in radical polymerizations has very different causes, e.g., hindered rotational modes, hydrogen bonding or electron pair donor/acceptor interactions. Depending on the origin of the solvent influence propagation rate coefficients, k(P), may be enhanced by up to an order of magnitude associated with changes in the pre-exponential or the activation energy of k(P). In contrast, non-specific interactions, size and steric effects lead to rather small changes in the vicinity of the radical chain end and are reflected by modest variations in k(P).
The influence of the reaction medium (organic solvents, water, ionic liquids, supercritical CO2) on the propagation rate in radical polymerizations has very different causes, e.g., hindered rotational modes, hydrogen bonding, or electron pair donor / acceptor interactions. Depending on the origin of the solvent influence propagation rate coefficients, kp, may be enhanced by up to an order of magnitude associated with changes in the pre-exponential or the activation energy of kp. Contrary, non-specific interactions, size and steric effects lead to rather small changes in the vicinity of the radical chain end and are reflected by modest variations in kp.