Filtern
Erscheinungsjahr
Dokumenttyp
- Wissenschaftlicher Artikel (12)
- Dissertation (2)
- Postprint (1)
Sprache
- Englisch (15)
Schlagworte
- Raman spectroscopy (15) (entfernen)
The iron-containing ionic liquids 1-butyl-3-methylimidazolium tetrachloroferrate(III) [C(4)mim][FeCl4] and 1-dodecyl-3-methylimidazolium tetrachloroferrate(III) [C(12)mim][FeCl4] exhibit a thermally induced demixing with water (thermomorphism). The phase separation temperature varies with IL weight fraction in water and can be tuned between 100 degrees C and room temperature. The reversible lower critical solution temperature (LCST) is only observed at IL weight fractions below ca. 35% in water. UV/Vis, IR, and Raman spectroscopy along with elemental analysis prove that the yellow-brown liquid phase recovered after phase separation is the starting IL [C(4)mim][FeCl4] and [C(12)mim][FeCl4], respectively. Photometry and ICP-OES show that about 40% of iron remains in the water phase upon phase separation. Although the process is thus not very efficient at the moment, the current approach is the first example of an LCST behavior of a metal-containing IL and therefore, although still inefficient, a prototype for catalyst removal or metal extraction.
Wood has an excellent mechanical performance, but wider utilization of this renewable resource as an engineering material is limited by unfavorable properties such as low dimensional stability upon moisture changes and a low durability. However, some wood species are known to produce a wood of higher quality by inserting mainly phenolic substances in the already formed cell walls a process so-called heartwood formation. In the present study, we used the heartwood formation in black locust (Robinia pseudoacacia) as a source of bioinspiration and transferred principles of the modification in order to improve spruce wood properties (Picea abies) by a chemical treatment with commercially available flavonoids. We were able to effectively insert hydrophobic flavonoids in the cell wall after a tosylation treatment for activation. The chemical treatment reduced the water uptake of the wood cell walls and increased the dimensional stability of the bulk spruce wood. Further analysis of the chemical interaction of the flavonoid with the structural cell wall components revealed the basic principle of this bioinspired modification. Contrary to established modification treatments, which mainly address the hydroxyl groups of the carbohydrates with hydrophilic substances, the hydrophobic flavonoids are effective by a physical bulking in the cell wall most probably stabilized by pi-pi interactions. A biomimetic transfer of the underlying principle may lead to alternative cell wall modification procedures and improve the performance of wood as an engineering material.
Reliability tests for wavelength-stabilized compact diode laser systems emitting at 671 nm are presented. The devices were mounted on microoptical benches with the dimensions of 13 mm x 4 mm. Reflecting Bragg gratings were used for wavelength stabilization and emission width narrowing. The reliability tests were performed at 25 degrees C and at an output power up to 10 mW per micrometer stripe width of the gain medium. Reliable operation could be demonstrated over a test time up to 14 500 h at an output power up to 1.0 W. Environmental tests using random vibrations with acceleration up to 29 g were performed without deterioration of the devices.
Analyses of the correlation between dermal and blood carotenoids in female cattle by optical methods
(2013)
Herd health programs for the maintenance of welfare and productivity in cattle need efficient tools for monitoring the health of individual animals. Recent reports demonstrate that the oxidative status is related to various stress conditions in dairy cows. Biomarkers, among other carotenoids, could serve as indicators of stress originating from the environment (e.g., heat stress or sun radiation) or from the animal itself (e.g., disease). To date, only invasive in vitro tests are available to assess the oxidative status in cattle. The present study compares the results of optical noninvasive in vivo measurements of dermal carotenoids in cattle udder skin using an LED-based miniaturized spectroscopic system (MSS) with those obtained by photometric analysis of beta carotene in whole blood samples using a portable device. Correlations between the concentrations of dermal and blood carotenoids were calculated under consideration of the nutritional status of the animals. Significant correlation (R = 0.86) was found for cattle with a moderate to obese body condition. Thus, the blood and skin concentrations of the marker substance beta carotene are comparable under stable stress conditions of the cattle. This demonstrates that the MSS is suitable for noninvasive assessment of dermal carotenoid concentrations in cattle.
The adsorption of boron (boric acid) from aqueous solutions on alumina has been investigated at pH 8.0, I=0.1M NaClO4, T=22 +/- 3 degrees C, and under normal atmospheric conditions. The characterization of the adsorbed species was performed by Raman spectroscopy and the spectroscopic speciation was assisted by theoretical DFT calculations. Evaluation of the spectroscopic data points to the formation of inner-sphere surface complexes and indicates the formation of two different types of adsorbed boron species. The theoretical calculations corroborate the spectroscopic data and indicate that at low boron concentration the monodentate surface species dominates, whereas increased boron concentration favors the formation of a bidentate surface species. Assuming low coverage, the conditional formation constant for the monodentate surface species has been evaluated to be log=4.1 +/- 0.1.
Mars is one of the best candidates among planetary bodies for supporting life. The presence of water in the form of ice and atmospheric vapour together with the availability of biogenic elements and energy are indicators of the possibility of hosting life as we know it. The occurrence of permanently frozen ground – permafrost, is a common phenomenon on Mars and it shows multiple morphological analogies with terrestrial permafrost. Despite the extreme inhospitable conditions, highly diverse microbial communities inhabit terrestrial permafrost in large numbers. Among these are methanogenic archaea, which are anaerobic chemotrophic microorganisms that meet many of the metabolic and physiological requirements for survival on the martian subsurface. Moreover, methanogens from Siberian permafrost are extremely resistant against different types of physiological stresses as well as simulated martian thermo-physical and subsurface conditions, making them promising model organisms for potential life on Mars. The main aims of this investigation are to assess the survival of methanogenic archaea under Mars conditions, focusing on methanogens from Siberian permafrost, and to characterize their biosignatures by means of Raman spectroscopy, a powerful technology for microbial identification that will be used in the ExoMars mission. For this purpose, methanogens from Siberian permafrost and non-permafrost habitats were subjected to simulated martian desiccation by exposure to an ultra-low subfreezing temperature (-80ºC) and to Mars regolith (S-MRS and P-MRS) and atmospheric analogues. They were also exposed to different concentrations of perchlorate, a strong oxidant found in martian soils. Moreover, the biosignatures of methanogens were characterized at the single-cell level using confocal Raman microspectroscopy (CRM). The results showed survival and methane production in all methanogenic strains under simulated martian desiccation. After exposure to subfreezing temperatures, Siberian permafrost strains had a faster metabolic recovery, whereas the membranes of non-permafrost methanogens remained intact to a greater extent. The strain Methanosarcina soligelidi SMA-21 from Siberian permafrost showed significantly higher methane production rates than all other strains after the exposure to martian soil and atmospheric analogues, and all strains survived the presence of perchlorate at the concentration on Mars. Furthermore, CRM analyses revealed remarkable differences in the overall chemical composition of permafrost and non-permafrost strains of methanogens, regardless of their phylogenetic relationship. The convergence of the chemical composition in non-sister permafrost strains may be the consequence of adaptations to the environment, and could explain their greater resistance compared to the non-permafrost strains. As part of this study, Raman spectroscopy was evaluated as an analytical technique for remote detection of methanogens embedded in a mineral matrix. This thesis contributes to the understanding of the survival limits of methanogenic archaea under simulated martian conditions to further assess the hypothetical existence of life similar to methanogens on the martian subsurface. In addition, the overall chemical composition of methanogens was characterized for the first time by means of confocal Raman microspectroscopy, with potential implications for astrobiological research.
In this paper the concept of a compact high-resolution spectrometer based on the combination of dispersive and interferometric elements is presented. Dispersive elements are used to spectrally resolve the light in one direction with coarse resolution (Delta lambda < 0.5 nm), while perpendicular to that direction an etalon provides high spectral resolution (Delta lambda < 50 pm). This concept for two-dimensional spectroscopy has been implemented for the wavelength range lambda = 350-650 nm. Appropriate algorithms for reconstructing spectra from the two-dimensional raw data and for wavelength calibration were established in an analysis software. Potential applications for this new spectrometer are Raman and laser-induced breakdown spectroscopy (LIBS). Resolutions down to 28 pm (routinely 54 pm) could be realized for these applications.
A great number of Central Asian wall paintings, archeological materials, architectural fragments, and textiles, as well as painting fragments on silk and paper, make up the so called Turfan Collection at the Asian Art Museum in Berlin. The largest part of the collection comes from the Kucha region, a very important cultural center in the third to ninth centuries. Between 1902 and 1914, four German expeditions traveled along the northern Silk Road. During these expeditions, wall paintings were detached from their original settings in Buddhist cave complexes. This paper reports a technical study of a wall painting, existing in eight fragments, from the Buddhist cave no. 40 (Ritterhohle). Its original painted surface is soot blackened and largely illegible. Gruwedel, leader of the first and third expeditions, described the almost complete destruction of the rediscovered temple complex and evidence of fire damage. The aim of this case study is to identify the materials used for the wall paintings. Furthermore, soot deposits as well as materials from conservation interventions were of interest. Non-invasive analyses were preferred but a limited number of samples were taken to provide more precise information on the painting technique. By employing optical and scanning electron microscopy, energy dispersive X-ray spectroscopy, micro X-ray fluorescence spectroscopy, X-ray diffraction analysis, and Raman spectroscopy, a layer sequence of earthen render, a ground layer made of gypsum, and a paint layer containing a variety of inorganic pigments were identified.
Zircon (ZrSiO4), hafnon (HfSiO4) and five intermediate compositions were synthesized from a Pb silicate melt. The resulting crystals were 20-300 mu m in size and displayed sector and growth zoning. Raman spectra were acquired at locations in the sample for which preceding electron microprobe (EMP) analyses revealed sufficient compositional homogeneity. The dataset documents shifts of Raman bands with changing composition. In this study, bands that have previously not been reported were found for the intermediate compositions and for pure hafnon, in particular at wavenumbers less than 200 cm(-1). For these external modes, the dataset provides new insight into the compositional dependence of their frequencies. Density-functional theory calculations support the observations and are used for a detailed interpretation of the spectra. The pitfalls of the EMP analysis along the zircon-hafnon join are highlighted.
Imaging Raman spectroscopy can be used to identify cancerous tissue. Traditionally, a step-by-step scanning of the sample is applied to generate a Raman image, which, however, is too slow for routine examination of patients. By transferring the technique of integral field spectroscopy (IFS) from astronomy to Raman imaging, it becomes possible to record entire Raman images quickly within a single exposure, without the need for a tedious scanning procedure. An IFS-based Raman imaging setup is presented, which is capable of measuring skin ex vivo or in vivo. It is demonstrated how Raman images of healthy and cancerous skin biopsies were recorded and analyzed. (C) The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License.