Refine
Year of publication
Document Type
- Article (9)
- Doctoral Thesis (9)
- Postprint (3)
- Master's Thesis (1)
Is part of the Bibliography
- yes (22)
Keywords
- DNA (22) (remove)
Weltweit versuchen Wissenschaftler, künstliche Viren für den Gentransfer zu konstruieren, die nicht reproduktionsfähig sind. Diese sollen die Vorteile der natürlichen Viren besitzen (effizienter Transport von genetischem Material), jedoch keine Antigene auf ihrer Oberfläche tragen, die Immunreaktionen auslösen. Ziel dieses Projektes ist es, einen künstlichen Viruspartikel herzustellen, dessen Basis eine Polyelektrolytenhohlkugel bildet, die mit einer Lipiddoppelschicht bedeckt ist. Um intakte Doppelschichten zu erzeugen, muss die Wechselwirkung zwischen Lipid und Polyelektrolyt (z.B. DNA) verstanden und optimiert werden. Dazu ist es notwendig, die strukturelle Grundlage der Interaktion aufzuklären. Positiv geladene Lipide gehen zwar starke Wechselwirkungen mit der negativ geladenen DNA ein, sie wirken jedoch toxisch auf biologische Zellen. In der vorliegenden Arbeit wurde daher die durch zweiwertige Kationen vermittelte Kopplung von genomischer oder Plasmid-DNA an zwitterionische oder negativ geladene Phospholipide an zwei Modellsystemen untersucht. 1. Modellsystem: Lipidmonoschicht an der Wasser/Luft-Grenzfläche Methoden: Filmwaagentechnik in Kombination mit IR-Spektroskopie (IRRAS), Röntgenreflexion (XR), Röntgendiffraktion (GIXD), Brewsterwinkel-Mikroskopie (BAM), Röntgenfluoreszenz (XRF) und Oberflächenpotentialmessungen Resultate: A) Die Anwesenheit der zweiwertigen Kationen Ba2+, Mg2+, Ca2+ oder Mn2+ in der Subphase hat keinen nachweisbaren Einfluss auf die Struktur der zwitterionischen DMPE- (1,2-Dimyristoyl-phosphatidyl-ethanolamin) Monoschicht. B) In der Subphase gelöste DNA adsorbiert nur in Gegenwart dieser Kationen an der DMPE-Monoschicht. C) Sowohl die Adsorption genomischer Kalbsthymus-DNA als auch der Plasmid-DNA pGL3 bewirkt eine Reduktion des Neigungswinkels der Alkylketten, die auf einen veränderten Platzbedarf der Kopfgruppe zurückzuführen ist. Durch die Umorientierung der Kopfgruppe wird die elektrostatische Wechselwirkung zwischen den positiv geladenen Stickstoffatomen der Lipidkopfgruppen und den negativ geladenen DNA-Phosphaten erhöht. D) Die adsorbierte DNA weist eine geordnete Struktur auf, wenn sie durch Barium-, Magnesium-, Calcium- oder Manganionen komplexiert ist. Der Abstand zwischen parallelen DNA-Strängen hängt dabei von der Größe der DNA-Fragmente sowie von der Art des Kations ab. Die größten Abstände ergeben sich mit Bariumionen, gefolgt von Magnesium- und Calciumionen. Die kleinsten DNA-Abstände werden durch Komplexierung mit Manganionen erhalten. Diese Ionenreihenfolge stellt sich sowohl für genomische DNA als auch für Plasmid-DNA ein. E) Die DNA-Abstände werden durch die Kompression des Lipidfilms nicht beeinflusst. Zwischen der Lipidmonoschicht und der adsorbierten DNA besteht demnach nur eine schwache Wechselwirkung. Offensichtlich befindet sich die durch zweiwertige Kationen komplexierte DNA als weitgehend eigenständige Schicht unter dem Lipidfilm. 2. Modellsystem: Lipiddoppelschicht an der fest/flüssig-Grenzfläche Methoden: Neutronenreflexion (NR) und Quarzmikrowaage (QCM-D) Resultate: A) Das zwitterionische Phospholipid DMPC (1,2-Dimyristoyl-phosphatidylcholin) bildet keine Lipiddoppelschicht auf planaren Polyelektrolytmultischichten aus, deren letzte Lage das positiv geladene PAH (Polyallylamin) ist. B) Hingegen bildet DMPC auf dem negativ geladenen PSS (Polystyrolsulfonat) eine Doppelschicht aus, die jedoch Defekte aufweist. C) Eine Adsorption von genomischer Kalbsthymus-DNA auf dieser Lipidschicht findet nur in Gegenwart von Calciumionen statt. Andere zweiwertige Kationen wurden nicht untersucht. D) Das negativ geladene Phospholipid DLPA (1,2-Dilauryl-phosphatidsäure) bildet auf dem positiv geladenen PAH eine Lipiddoppelschicht aus, die Defekte aufweist. E) DNA adsorbiert ebenfalls erst in Anwesenheit von Calciumionen in der Lösung an die DLPA-Schicht. F) Durch die Zugabe von EDTA (Ethylendiamintetraessigsäure) werden die Calciumionen dem DLPA/DNA-Komplex entzogen, wodurch dieser dissoziiert. Demnach ist die calciuminduzierte Bildung dieser Komplexe reversibel.
We report on a new three-color FRET system consisting of three fluorescent dyes, i.e., of a carbostyril (=quinolin-2(1H)-one)-derived donor D, a (bathophenanthroline)ruthenium complex as a relay chromophore A1, and a Cy dye as A2 (FRET=Forster resonance-energy-transfer) (cf. Fig. 1). With their widely matching spectroscopic properties (cf. Fig. 2), the combination of these dyes yielded excellent FRET efficiencies. Furthermore, fluorescence lifetime measurements revealed that the long fluorescence lifetime of the Ru complex was transferred to the Cy dye offering the possibility to measure the whole system in a time-resolved mode. The FRET system was established on double-stranded DNA (cf. Fig. 3) but it should also be generally applicable to other biomolecules.
Deoxyribonucleic acid (DNA) is the carrier of human genetic information and is exposed to environmental influences such as the ultraviolet (UV) fraction of sunlight every day. The photostability of the DNA against UV light is astonishing. Even if the DNA bases have a strong absorption maximum at around 260 nm/4.77 eV, their quantum yield of photoproducts remains very low 1. If the photon energies exceed the ionization energy (IE) of the nucleobases ( ̴ 8-9 eV) 2, the DNA can be severely damaged. Photoexcitation and -ionization reactions occur, which can induce strand breaks in the DNA. The efficiency of the excitation and ionization induced strand breaks in the target DNA sequences are represented by cross sections. If Si as a substrate material is used in the VUV irradiation experiments, secondary electrons with an energy below 3.6 eV are generated from the substrate. This low energy electrons (LEE) are known to induce dissociative electron attachment (DEA) in DNA and with it DNA strand breakage very efficiently. LEEs play an important role in cancer radiation therapy, since they are generated secondarily along the radiation track of ionizing radiation.
In the framework of this thesis, different single stranded DNA sequences were irradiated with 8.44 eV vacuum UV (VUV) light and cross sections for single strand breaks (SSB) were determined. Several sequences were also exposed to secondary LEEs, which additionally contributed to the SSBs. First, the cross sections for SSBs depending on the type of nucleobases were determined. Both types of DNA sequences, mono-nucleobase and mixed sequences showed very similar results upon VUV radiation. The additional influence of secondarily generated LEEs resulted in contrast in a clear trend for the SSB cross sections. In this, the polythymine sequence had the highest cross section for SSBs, which can be explained by strong anionic resonances in this energy range. Furthermore, SSB cross sections were determined as a function of sequence length. This resulted in an increase in the strand breaks to the same extent as the increase in the geometrical cross section. The longest DNA sequence (20 nucleotides) investigated in this series, however, showed smaller cross section values for SSBs, which can be explained by conformational changes in the DNA. Moreover, several DNA sequences that included the radiosensitizers 5-Bromouracil (5BrU) and 8-Bromoadenine (8BrA) were investigated and the corresponding SSB cross sections were determined. It was shown that 5BrU reacts very strongly to VUV radiation leading to high strand break yields, which showed in turn a strong sequence-dependency. 8BrA, on the other hand, showed no sensitization to the applied VUV radiation, since almost no increase in strand breakage yield was observed in comparison to non-modified DNA sequences.
In order to be able to identify the mechanisms of radiation damage by photons, the IEs of certain DNA sequences were further explored using photoionization tandem mass spectrometry. By varying the DNA sequence, both the IEs depending on the type of nucleobase as well as on the DNA strand length could be identified and correlated to the SSB cross sections. The influence of the IE on the photoinduced reaction in the brominated DNA sequences could be excluded.
Palaeogenomes of Eurasian straight-tusked elephants challenge the current view of elephant evolution
(2017)
The straight-tusked elephants Palaeoloxodon spp. were widespread across Eurasia during the Pleistocene. Phylogenetic reconstructions using morphological traits have grouped them with Asian elephants (Elephas maximus), and many paleontologists place Palaeoloxodon within Elephas. Here, we report the recovery of full mitochondrial genomes from four and partial nuclear genomes from two P. antiquus fossils. These fossils were collected at two sites in Germany, Neumark-Nord and Weimar-Ehringsdorf, and likely date to interglacial periods similar to 120 and similar to 244 thousand years ago, respectively. Unexpectedly, nuclear and mitochondrial DNA analyses suggest that P. antiquus was a close relative of extant African forest elephants (Loxodonta cyclotis). Species previously referred to Palaeoloxodon are thus most parsimoniously explained as having diverged from the lineage of Loxodonta, indicating that Loxodonta has not been constrained to Africa. Our results demonstrate that the current picture of elephant evolution is in need of substantial revision.
Im Fokus dieser Arbeit stand der Aufbau einer auf DNA basierenden Nanostruktur. Der universelle Vier-Buchstaben-Code der DNA ermöglicht es, Bindungen auf molekularer Ebene zu adressieren. Die chemischen und physikalischen Eigenschaften der DNA prädestinieren dieses Makromolekül für den Einsatz und die Verwendung als Konstruktionselement zum Aufbau von Nanostrukturen. Das Ziel dieser Arbeit war das Aufspannen eines DNA-Stranges zwischen zwei Fixpunkten. Hierfür war es notwendig, eine Methode zu entwickeln, welche es ermöglicht, Funktionsmoleküle als Ankerelemente ortsaufgelöst auf eine Oberfläche zu deponieren. Das Deponieren dieser Moleküle sollte dabei im unteren Mikrometermaßstab erfolgen, um den Abmaßen der DNA und der angestrebten Nanostruktur gerecht zu werden. Das eigens für diese Aufgabe entwickelte Verfahren zum ortsaufgelösten Deponieren von Funktionsmolekülen nutzt das Bindungspaar Biotin-Neutravidin. Mit Hilfe eines Rasterkraftmikroskops (AFM) wurde eine zu einem „Stift“ umfunktionierte Rasterkraftmikroskopspitze so mit der zu deponierenden „Tinte“ beladen, dass das Absetzen von Neutravidin im unteren Mikrometermaßstab möglich war. Dieses Neutravidinmolekül übernahm die Funktion als Bindeglied zwischen der biotinylierten Glasoberfläche und dem eigentlichen Adressmolekül. Das somit generierte Neutravidin-Feld konnte dann mit einem biotinylierten Adressmolekül durch Inkubation funktionalisiert werden. Namensgebend für dieses Verfahren war die Möglichkeit, Neutravidin mehrmals zu deponieren und zu adressieren. Somit ließ sich sequenziell ein Mehrkomponenten-Feld aufbauen. Die Einschränkung, mit einem AFM nur eine Substanz deponieren zu können, wurde so umgangen. Ferner mußten Ankerelemente geschaffen werden, um die DNA an definierten Punkten immobilisieren zu können. Die Bearbeitung der DNA erfolgte mit molekularbiologischen Methoden und zielte darauf ab, einen DNA-Strang zu generieren, welcher an seinen beiden Enden komplementäre Adressequenzen enthält, um gezielt mit den oberflächenständigen Ankerelementen binden zu können. Entsprechend der Geometrie der mit dem AFM erzeugten Fixpunkte und den oligonukleotidvermittelten Adressen kommt es zur Ausbildung einer definierten DNA-Struktur. Mit Hilfe von fluoreszenzmikroskopischen Methoden wurde die aufgebaute DNA-Nanostruktur nachgewiesen. Der Nachweis der nanoskaligen Interaktion von DNA-bindenden Molekülen mit der generierten DNA-Struktur wurde durch die Bindung von PNA (peptide nucleic acid) an den DNA-Doppelstrang erbracht. Diese PNA-Bindung stellt ihrerseits ein funktionales Strukturelement im Nanometermaßstab dar und wird als Nanostrukturbaustein verstanden.
Deoxyribonucleic acid (DNA) nanostructures enable the attachment of functional molecules to nearly any unique location on their underlying structure. Due to their single-base-pair structural resolution, several ligands can be spatially arranged and closely controlled according to the geometry of their desired target, resulting in optimized binding and/or signaling interactions.
This dissertation covers three main projects. All of them use variations of functionalized DNA nanostructures that act as platform for oligovalent presentation of ligands. The purpose of this work was to evaluate the ability of DNA nanostructures to precisely display different types of functional molecules and to consequently enhance their efficacy according to the concept of multivalency. Moreover, functionalized DNA structures were examined for their suitability in functional screening assays. The developed DNA-based compound ligands were used to target structures in different biological systems.
One part of this dissertation attempted to bind pathogens with small modified DNA nanostructures. Pathogens like viruses and bacteria are known for their multivalent attachment to host cells membranes. By blocking their receptors for recognition and/or fusion with their targeted host in an oligovalent manner, the objective was to impede their ability to adhere to and invade cells. For influenza A, only enhanced binding of oligovalent peptide-DNA constructs compared to the monovalent peptide could be observed, whereas in the case of respiratory syncytial virus (RSV), binding as well as blocking of the target receptors led to an increased inhibition of infection in vitro.
In the final part, the ability of chimeric DNA-peptide constructs to bind to and activate signaling receptors on the surface of cells was investigated. Specific binding of DNA trimers, conjugated with up to three peptides, to EphA2 receptor expressing cells was evaluated in flow cytometry experiments. Subsequently, their ability to activate these receptors via phosphorylation was assessed. EphA2 phosphorylation was significantly increased by DNA trimers carrying three peptides compared to monovalent peptide. As a result of activation, cells underwent characteristic morphological changes, where they "round up" and retract their periphery.
The results obtained in this work comprehensively prove the capability of DNA nanostructures to serve as stable, biocompatible, controllable platforms for the oligovalent presentation of functional ligands. Functionalized DNA nanostructures were used to enhance biological effects and as tool for functional screening of bio-activity. This work demonstrates that modified DNA structures have the potential to improve drug development and to unravel the activation of signaling pathways.
In dieser Arbeit wird die Beschichtung von kolloidalen Templaten mit Hilfe der Layer-by-layer Technik beschrieben. Mit ihr ist es möglich, die Oberfläche der Template mit sehr dünnen und gut definierten Filmen zu versehen. Durch Auflösung der Template werden Kapseln hergestellt, die je nach Zusammensetzung der Beschichtung unterschiedliche Eigenschaften aufweisen.
Label-free electrical detection of consecutive deoxyribonucleic acid (DNA) hybridization/denaturation by means of an array of individually addressable field-effect-based nanoplate silicon-on-insulator (SOI) capacitors modified with gold nanoparticles (Au-NP) is investigated. The proposed device detects charge changes on Au-NP/DNA hybrids induced by the hybridization or denaturation event. DNA hybridization was performed in a high ionic-strength solution to provide a high hybridization efficiency. On the other hand, to reduce the screening of the DNA charge by counter ions and to achieve a high sensitivity, the sensor signal induced by the hybridization and denaturation events was measured in a low ionic-strength solution. High sensor signals of about 120, 90, and 80 mV were registered after the DNA hybridization, denaturation, and re-hybridization events, respectively. Fluorescence microscopy has been applied as reference method to verify the DNA immobilization, hybridization, and denaturation processes. An electrostatic charge-plane model for potential changes at the gate surface of a nanoplate field-effect sensor induced by the DNA hybridization has been developed taking into account both the Debye length and the distance of the DNA charge from the gate surface.
Hintergrund: Etablierte Protein- und Nukleinsäure-basierte Methoden für den spezifischen Pathogennachweis sind nur unter standardisierten Laborbedingungen von geschultem Personal durchführbar und daher mit einem hohen Zeit- und Kostenaufwand verbunden. In der Nukleinsäure-basierten Diagnostik kann durch die Einführung der isothermalen Amplifikation eine schnelle und kostengünstige Alternative zur Polymerase-Kettenreaktion (PCR) verwendet werden. Die Loop-mediated isothermal amplification (LAMP) bietet aufgrund der hohen Amplifikationseffizienz vielfältige Detektionsmöglichkeiten, die sowohl für Schnelltest- als auch für Monitoring-Anwendungen geeignet sind.
Ein wesentliches Ziel dieser Arbeit war die Verbesserung der Anwendbarkeit der LAMP und die Entwicklung einer neuen Methode für den einfachen, schnellen und günstigen Nachweis von Pathogenen mittels alternativer DNA- oder Pyrophosphat-abhängiger Detektionsverfahren. Hier wurden zunächst direkte und indirekte Detektionsmethoden untersucht und darauf aufbauend ein Verfahren entwickelt, mit dem neue Metallionen-abhängige Fluoreszenzfarbstoffe für die selektive Detektion von Pyrophosphat in der LAMP und anderen enzymatischen Reaktionen identifiziert werden können. Als Alternative für die DNA-basierte Detektion in der digitalen LAMP sollten die zuvor etablierten Farbstoffe für den Pyrophosphatnachweis in einer Emulsion getestet werden. Abschließend wurde ein neuer Reaktionsmechanismus für die effiziente Generierung hochmolekularer DNA unter isothermalen Bedingungen als Alternative zur LAMP entwickelt.
Ergebnisse: Für den Nachweis RNA- und DNA-basierter Phythopathogene konnte die Echtzeit- und Endpunktdetektion mit verschiedenen Farbstoffen in einem geschlossenen System etabliert werden. Hier wurde Berberin als DNA-interkalierender Fluoreszenzfarbstoff mit vergleichbarer Sensitivität zu SYBR Green und EvaGreen erfolgreich in der LAMP mit Echtzeitdetektion eingesetzt. Ein Vorteil von Berberin gegenüber den anderen Farbstoffen ist die Toleranz der DNA-Polymerase auch bei hohen Farbstoffkonzentrationen. Berberin kann daher auch in der geschlossenen LAMP-Reaktion ohne zusätzliche Anpassung der Reaktionsbedingungen für die Endpunktdetektion verwendet werden. Darüber hinaus konnte Hydroxynaphtholblau (HNB), das für den kolorimetrischen Endpunktnachweis bekannt ist, erstmals auch für die fluorimetrische Detektion der LAMP in Echtzeit eingesetzt werden. Zusätzlich konnten in der Arbeit weitere Metallionen-abhängige Farbstoffe zur indirekten Detektion der LAMP über das Pyrophosphat identifiziert werden. Dafür wurde eine iterative Methode entwickelt, mit der potenzielle Farbstoffe hinsichtlich ihrer Enzymkompatibilität und ihrer spektralen Eigenschaften bei An- oder Abwesenheit von Manganionen selektiert werden können. Mithilfe eines kombinatorischen Screenings im Mikrotiterplattenformat konnte die komplexe Konzentrationsabhängigkeit zwischen den einzelnen Komponenten für einen fluorimetrischen Verdrängungsnachweis untersucht werden. Durch die Visualisierung des Signal-Rausch-Verhältnis’ als Intensitätsmatrix (heatmap) konnten zunächst Alizarinrot S und Tetrazyklin unter simulierten Reaktionsbedingungen selektiert werden. In der anschließenden enzymatischen LAMP-Reaktion konnte insbesondere Alizarinrot S als günstiger, nicht-toxischer und robuster Fluoreszenzfarbstoff identifiziert werden und zeigte eine Pyrophosphat-abhängige Zunahme der Fluoreszenzintensität. Die zuvor etablierten Farbstoffe (HNB, Calcein und Alizarinrot S) konnten anschließend erfolgreich für die indirekte, fluorimetrische Detektion von Pyrophosphat in einer LAMP-optimierten Emulsion eingesetzt werden. Die Stabilität und Homogenität der generierten Emulsion wurde durch den Zusatz des Emulgators Poloxamer 188 verbessert. Durch die fluoreszenzmikroskopische Analyse der Emulsion war eine eindeutige Diskriminierung der positiven und negativen Tröpfchen vor allem bei Einsatz von Calcein und Alizarinrot S möglich. Aufgrund des komplexen Primer-Designs und der hohen Wahrscheinlichkeit unspezifischer Amplifikation in der LAMP wurde eine neue Bst DNA-Polymerase-abhängige isothermale Amplifikationsreaktion entwickelt. Durch die Integration einer spezifischen Linkerstruktur (abasische Stelle oder Hexaethylenglykol) zwischen zwei Primersequenzen konnte ein bifunktioneller Primer die effiziente Regenerierung der Primerbindungsstellen gewährleisten. Der neue Primer induziert nach der spezifischen Hybridisierung auf dem Templat die Rückfaltung zu einer Haarnadelstruktur und blockiert gleichzeitig die Polymeraseaktivität am Gegenstrang, wodurch eine autozyklische Amplifikation trotz konstanter Reaktionstemperatur möglich ist. Die Effizienz der „Hinge-initiated Primer dependent Amplification“ (HIP) konnte abschließend durch die Verkürzung der Distanz zwischen einem modifizierten Hinge-Primer und einem PCR-ähnlichen Primer verbessert werden.
Schlussfolgerung: Die LAMP hat sich aufgrund der hohen Robustheit und Effizienz zu einer leistungsfähigen Alternative für die klassische PCR in der molekularbiologischen Diagnostik entwickelt. Unterschiedliche Detektionsverfahren verbessern die Leistungsfähigkeit der qualitativen und quantitativen LAMP für die Feldanwendungen und für die Diagnostik, da die neuen DNA- und Pyrophosphat-abhängigen Nachweismethoden in einer geschlossenen Reaktion eingesetzt werden können und so eine einfache Pathogendiagnostik ermöglichen. Die gezeigten Methoden können darüber hinaus zu einer Kostensenkung und Zeitersparnis gegenüber den herkömmlichen Methoden beitragen. Ein attraktives Ziel stellt die Weiterentwicklung der HIP für den Pathogennachweis als Alternative zur LAMP dar. Hierbei können die neuen LAMP-Detektionsverfahren ebenfalls Anwendung finden. Die Verwendung von Bst DNA-Polymerase-abhängigen Reaktionen ermöglicht darüber hinaus die Integration einer robusten isothermalen Amplifikation in mikrofluidische Systeme. Durch die Kombination der Probenvorbereitung, Amplifikation und Detektion sind zukünftige Anwendungen mit kurzer Analysezeit und geringem apparativen Aufwand insbesondere in der Pathogendiagnostik möglich.
Mitochondria and plastids are organelles with an endosymbiotic origin. During evolution, many genes are lost from the organellar genomes and get integrated in the nuclear genome, in what is known as intracellular/endosymbiotic gene transfer (IGT/EGT). IGT has been reproduced experimentally in Nicotiana tabacum at a gene transfer rate (GTR) of 1 event in 5 million cells, but, despite its centrality to eukaryotic evolution, there are no genetic factors known to influence the frequency of IGT in higher eukaryotes. The focus of this work was to determine the role of different DNA repair pathways of double strand break repair (DSBR) in the integration step of organellar DNA in the nuclear genome during IGT. Here, a CRISPR/Cas9 mutagenesis strategy was implemented in N. tabacum, with the aim of generating mutants in nuclear genes without expected visible phenotypes. This strategy led to the generation of a collection of independent mutants in the LIG4 (necessary for non-homologous end joining, NHEJ) and POLQ genes (necessary for microhomology mediated end joining, MMEJ). Targeting of other DSBR genes (KU70, KU80, RPA1C) generated mutants with unexpectedly strong developmental phenotypes.. These factors have telomeric roles, hinting towards a possible relationship between telomere length, and strength of developmental disruption upon loss of telomere structure in plants. The mutants were made in a genetic background encoding a plastid-encoded IGT reporter, that confers kanamycin resistance upon transfer to the nucleus. Through large scale independent experiments, increased IGT from the chloroplast to the nucleus was observed in lig4 mutants, as well as lines encoding a POLQ gene with a defective polymerase domain (polqΔPol). This shows that NHEJ or MMEJ have a double-sided relationship with IGT: while transferred genes may integrate using either pathway, the presence of both pathways suppresses IGT in wild-type somatic cells, thus demonstrating for the first time the extent on which nuclear genes control IGT frequency in plants. The IGT frequency increases in the mutants are likely mediated by increased availability of double strand breaks for integration. Additionally, kinetic analysis reveals that gene transfer (GT) events accumulate linearly as a function of time spent under antibiotic selection in the experiment, demonstrating that, contrary to what was previously thought, there is no such thing as a single GTR in somatic IGT experiments. Furthermore, IGT in tissue culture experiments appears to be the result of a "race against the clock" for integration in the nuclear genome, that starts when the organellar DNA arrives to the nucleus granting transient antibiotic resistance. GT events and escapes of kanamycin selection may be two possible outcomes from this race: those instances where the organellar DNA gets to integrate are recovered as GT events, and in those cases where timely integration fails, antibiotic resistance cannot be sustained, and end up considered as escapes. In the mutants, increased opportunities for integration in the nuclear genome change the overall ratio between IGT and escape events. The resources generated here are promising starting points for future research: (1) the mutant collection, for the further study of processes that depend on DNA repair in plants (2) the collection of GT lines obtained from these experiments, for the study of the effect of DSBR pathways over integration patterns and stability of transferred genes and (3) the developed CRISPR/Cas9 workflow for mutant generation, to make N. tabacum meet its potential as an attractive model for answering complex biological questions.