Refine
Has Fulltext
- yes (15) (remove)
Year of publication
Document Type
- Doctoral Thesis (15) (remove)
Is part of the Bibliography
- yes (15) (remove)
Keywords
- modelling (15) (remove)
Chemical transformations and hydraulic processes in soil and groundwater often lead to an apparent retention of nitrate in lowland catchments. Models are needed to evaluate the interaction of these processes in space and time. The objectives of this study are i) to develop a specific modelling approach by combining selected modelling tools simulating N-transport and turnover in soils and groundwater of lowland catchments, ii) to study interactions between catchment properties and nitrogen transport. Special attention was paid to potential N-loads to surface waters. The modelling approach combines various submodels for water flow and solute transport in soil and groundwater: The soil-water- and nitrogen-model mRISK-N, the groundwater flow model MODFLOW and the solute transport model RT3D. In order to investigate interactions of N-transport and catchment characteristics, the distribution and availability of reaction partners have to be taken into account. Therefore, a special reaction-module is developed, which simulates various chemical processes in groundwater, such as the degradation of organic matter by oxygen, nitrate, sulphate or pyrite oxidation by oxygen and nitrate. The model approach is applied to different simulation, focussing on specific submodels. All simulation studies are based on field data from the Schaugraben catchment, a pleistocene catchment of approximately 25 km², close to Osterburg(Altmark) in the North of Saxony-Anhalt. The following modelling studies have been carried out: i) evaluation of the soil-water- and nitrogen-model based on lysimeter data, ii) modelling of a field scale tracer experiment on nitrate transport and turnover in the groundwater as a first application of the reaction module, iii) evaluation of interactions between hydraulic and chemical aquifer properties in a two-dimensional groundwater transect, iv) modelling of distributed groundwater recharge and soil nitrogen leaching in the study area, to be used as input data for subsequent groundwater simulations, v) study of groundwater nitrate distribution and nitrate breakthrough to the surface water system in the Schaugraben catchment area and a subcatchment, using three-dimensional modelling of reactive groundwater transport. The various model applications prove the model to be capable of simulating interactions between transport, turnover and hydraulic and chemical catchment properties. The distribution of nitrate in the sediment and the resulting loads to surface waters are strongly affected by the amount of reactive substances and by the residence time within the aquifer. In the Schaugraben catchment simulations, it is found that a period of 70 years is needed to raise the average seepage concentrations of nitrate to a level corresponding to the given input situation, if no reactions are considered. Under reactive transport conditions, nitrate concentrations are reduced effectively. Simulation results show that groundwater exfiltration does not contribute considerably to the nitrate pollution of surface waters, as most nitrate entering soils and groundwater is lost by denitrification. Additional sources, such as direct inputs or tile drains have to be taken into account to explain surface water loads. The prognostic value of the models for the study site is limited by uncertainties of input data and estimation of model parameters. Nevertheless, the modelling approach is a useful aid for the identification of source and sink areas of nitrate pollution as well as the investigation of system response to management measures or landuse changes with scenario simulations. The modelling approach assists in the interpretation of observed data, as it allows to integrate local observations into a spatial and temporal framework.
Zwischen 1990 und 1994 wurden rund 1000 Liegenschaften, die in der ehemaligen DDR von der Sowjetarmee und der NVA für militärische Übungen genutzt wurden, an Bund und Länder übergeben. Die größten Truppenübungsplätze liegen in Brandenburg und sind heute teilweise in Großschutzgebiete integriert, andere Plätze werden von der Bundeswehr weiterhin aktiv genutzt. Aufgrund des militärischen Betriebs sind die Böden dieser Truppenübungsplätze oft durch Blindgänger, Munitionsreste, Treibstoff- und Schmierölreste bis hin zu chemischen Kampfstoffen belastet. Allerdings existieren auf fast allen Liegenschaften neben diesen durch Munition und militärische Übungen belasteten Bereichen auch naturschutzfachlich wertvolle Flächen; gerade in den Offenlandbereichen kann dies durchaus mit einer Belastung durch Kampfmittel einhergehen. Charakteristisch für diese offenen Flächen, zu denen u.a. Zwergstrauchheiden, Trockenrasen, wüstenähnliche Sandflächen und andere nährstoffarme baumlose Lebensräume gehören, sind Großflächigkeit, Abgeschiedenheit sowie ihre besondere Nutzung und Bewirtschaftung, d.h. die Abwesenheit von land- und forstwirtschaftlichem Betrieb sowie von Siedlungsflächen. Diese Charakteristik war die Grundlage für die Entwicklung einer speziell angepassten Flora und Fauna. Nach Beendigung des Militärbetriebs setzte dann in weiten Teilen eine großflächige Sukzession – die allmähliche Veränderung der Zusammensetzung von Pflanzen- und Tiergesellschaften – ein, die diese offenen Bereiche teilweise bereits in Wald verwandelte und somit verschwinden ließ. Dies wiederum führte zum Verlust der an diese Offenlandflächen gebundenen Tier- und Pflanzenarten. Zur Erhaltung, Gestaltung und Entwicklung dieser offenen Flächen wurden daher von einer interdisziplinären Gruppe von Naturwissenschaftlern verschiedene Methoden und Konzepte auf ihre jeweilige Wirksamkeit untersucht. So konnten schließlich die für die jeweiligen Standortbedingungen geeigneten Maßnahmen eingeleitet werden. Voraussetzung für die Einleitung der Maßnahmen sind zum einen Kenntnisse zu diesen jeweiligen Standortbedingungen, d.h. zum Ist-Zustand, sowie zur Entwicklung der Flächen, d.h. zur Dynamik. So kann eine Abschätzung über die zukünftige Flächenentwicklung getroffen werden, damit ein effizienter Maßnahmeneinsatz stattfinden kann. Geoinformationssysteme (GIS) spielen dabei eine entscheidende Rolle zur digitalen Dokumentation der Biotop- und Nutzungstypen, da sie die Möglichkeit bieten, raum- und zeitbezogene Geometrie- und Sachdaten in großen Mengen zu verarbeiten. Daher wurde ein fachspezifisches GIS für Truppenübungsplätze entwickelt und implementiert. Die Aufgaben umfassten die Konzeption der Datenbank und des Objektmodells sowie fachspezifischer Modellierungs-, Analyse- und Präsentationsfunktionen. Für die Integration von Fachdaten in die GIS-Datenbank wurde zudem ein Metadatenkatalog entwickelt, der in Form eines zusätzlichen GIS-Tools verfügbar ist. Die Basisdaten für das GIS wurden aus Fernerkundungsdaten, topographischen Karten sowie Geländekartierungen gewonnen. Als Instrument für die Abschätzung der zukünftigen Entwicklung wurde das Simulationstool AST4D entwickelt, in dem sowohl die Nutzung der (Raster-)Daten des GIS als Ausgangsdaten für die Simulationen als auch die Nutzung der Simulationsergebnisse im GIS möglich ist. Zudem können die Daten in AST4D raumbezogen visualisiert werden. Das mathematische Konstrukt für das Tool war ein so genannter Zellulärer Automat, mit dem die Flächenentwicklung unter verschiedenen Voraussetzungen simuliert werden kann. So war die Bildung verschiedener Szenarien möglich, d.h. die Simulation der Flächenentwicklung mit verschiedenen (bekannten) Eingangsparametern und den daraus resultierenden unterschiedlichen (unbekannten) Endzuständen. Vor der Durchführung einer der drei in AST4D möglichen Simulationsstufen können angepasst an das jeweilige Untersuchungsgebiet benutzerspezifische Festlegungen getroffen werden.
To investigate the reliability and stability of spherical harmonic models based on archeo/-paleomagnetic data, 2000 Geomagnetic models were calculated. All models are based on the same data set but with randomized uncertainties. Comparison of these models to the geomagnetic field model gufm1 showed that large scale magnetic field structures up to spherical harmonic degree 4 are stable throughout all models. Through a ranking of all models by comparing the dipole coefficients to gufm1 more realistic uncertainty estimates were derived than the authors of the data provide.
The derived uncertainty estimates were used in further modelling, which combines archeo/-paleomagnetic and historical data. The huge difference in data count, accuracy and coverage of these two very different data sources made it necessary to introduce a time dependent spatial damping, which was constructed to constrain the spatial complexity of the model. Finally 501 models were calculated by considering that each data point is a Gaussian random variable, whose mean is the original value and whose standard deviation is its uncertainty. The final model arhimag1k is calculated by taking the mean of the 501 sets of Gauss coefficients. arhimag1k fits different dependent and independent data sets well. It shows an early reverse flux patch at the core-mantle boundary between 1000 AD and 1200 AD at the location of the South Atlantic Anomaly today. Another interesting feature is a high latitude flux patch over Greenland between 1200 and 1400 AD. The dipole moment shows a constant behaviour between 1600 and 1840 AD.
In the second part of the thesis 4 new paleointensities from 4 different flows of the island Fogo, which is part of Cape Verde, are presented. The data is fitted well by arhimag1k with the exception of the value at 1663 of 28.3 microtesla, which is approximately 10 microtesla lower than the model suggest.
This study presents the development of 1D and 2D Surface Evolution Codes (SECs) and their coupling to any lithospheric-scale (thermo-)mechanical code with a quadrilateral structured surface mesh.
Both SECs involve diffusion as approach for hillslope processes and the stream power law to reflect riverbed incision. The 1D SEC settles sediment that was produced by fluvial incision in the appropriate minimum, while the supply-limited 2D SEC DANSER uses a fast filling algorithm to model sedimantation. It is based on a cellular automaton. A slope-dependent factor in the sediment flux extends the diffusion equation to nonlinear diffusion. The discharge accumulation is achieved with the D8-algorithm and an improved drainage accumulation routine. Lateral incision enhances the incision's modelling. Following empirical laws, it incises channels of several cells width.
The coupling method enables different temporal and spatial resolutions of the SEC and the thermo-mechanical code. It transfers vertical as well as horizontal displacements to the surface model. A weighted smoothing of the 3D surface displacements is implemented. The smoothed displacement vectors transmit the deformation by bilinear interpolation to the surface model. These interpolation methods ensure mass conservation in both directions and prevent the two surfaces from drifting apart.
The presented applications refer to the evolution of the Pamir orogen. A calibration of DANSER's parameters with geomorphological data and a DEM as initial topography highlights the advantage of lateral incision. Preserving the channel width and reflecting incision peaks in narrow channels, this closes the huge gap between current orogen-scale incision models and observed topographies.
River capturing models in a system of fault-bounded block rotations reaffirm the importance of the lateral incision routine for capturing events with channel initiation. The models show a low probability of river capturings with large deflection angles. While the probability of river capturing is directly depending on the uplift rate, the erodibility inside of a dip-slip fault speeds up headward erosion along the fault: The model's capturing speed increases within a fault.
Coupling DANSER with the thermo-mechanical code SLIM 3D emphasizes the versatility of the SEC. While DANSER has minor influence on the lithospheric evolution of an indenter model, the brittle surface deformation is strongly affected by its sedimentation, widening a basin in between two forming orogens and also the southern part of the southern orogen to south, east and west.
The Andes are a ~7000 km long N-S trending mountain range developed along the South American western continental margin. Driven by the subduction of the oceanic Nazca plate beneath the continental South American plate, the formation of the northern and central parts of the orogen is a type case for a non-collisional orogeny. In the southern Central Andes (SCA, 29°S-39°S), the oceanic plate changes the subduction angle between 33°S and 35°S from almost horizontal (< 5° dip) in the north to a steeper angle (~30° dip) in the south. This sector of the Andes also displays remarkable along- and across- strike variations of the tectonic deformation patterns. These include a systematic decrease of topographic elevation, of crustal shortening and foreland and orogenic width, as well as an alternation of the foreland deformation style between thick-skinned and thin-skinned recorded along- and across the strike of the subduction zone. Moreover, the SCA are a very seismically active region. The continental plate is characterized by a relatively shallow seismicity (< 30 km depth) which is mainly focussed at the transition from the orogen to the lowland areas of the foreland and the forearc; in contrast, deeper seismicity occurs below the interiors of the northern foreland. Additionally, frequent seismicity is also recorded in the shallow parts of the oceanic plate and in a sector of the flat slab segment between 31°S and 33°S. The observed spatial heterogeneity in tectonic and seismic deformation in the SCA has been attributed to multiple causes, including variations in sediment thickness, the presence of inherited structures and changes in the subduction angle of the oceanic slab. However, there is no study that inquired the relationship between the long-term rheological configuration of the SCA and the spatial deformation patterns. Moreover, the effects of the density and thickness configuration of the continental plate and of variations in the slab dip angle in the rheological state of the lithosphere have been not thoroughly investigated yet. Since rheology depends on composition, pressure and temperature, a detailed characterization of the compositional, structural and thermal fields of the lithosphere is needed. Therefore, by using multiple geophysical approaches and data sources, I constructed the following 3D models of the SCA lithosphere: (i) a seismically-constrained structural and density model that was tested against the gravity field; (ii) a thermal model integrating the conversion of mantle shear-wave velocities to temperature with steady-state conductive calculations in the uppermost lithosphere (< 50 km depth), validated by temperature and heat-flow measurements; and (iii) a rheological model of the long-term lithospheric strength using as input the previously-generated models.
The results of this dissertation indicate that the present-day thermal and rheological fields of the SCA are controlled by different mechanisms at different depths. At shallow depths (< 50 km), the thermomechanical field is modulated by the heterogeneous composition of the continental lithosphere. The overprint of the oceanic slab is detectable where the oceanic plate is shallow (< 85 km depth) and the radiogenic crust is thin, resulting in overall lower temperatures and higher strength compared to regions where the slab is steep and the radiogenic crust is thick. At depths > 50 km, largest temperatures variations occur where the descending slab is detected, which implies that the deep thermal field is mainly affected by the slab dip geometry.
The outcomes of this thesis suggests that long-term thermomechanical state of the lithosphere influences the spatial distribution of seismic deformation. Most of the seismicity within the continental plate occurs above the modelled transition from brittle to ductile conditions. Additionally, there is a spatial correlation between the location of these events and the transition from the mechanically strong domains of the forearc and foreland to the weak domain of the orogen. In contrast, seismicity within the oceanic plate is also detected where long-term ductile conditions are expected. I therefore analysed the possible influence of additional mechanisms triggering these earthquakes, including the compaction of sediments in the subduction interface and dehydration reactions in the slab. To that aim, I carried out a qualitative analysis of the state of hydration in the mantle using the ratio between compressional- and shear-wave velocity (vp/vs ratio) from a previous seismic tomography. The results from this analysis indicate that the majority of the seismicity spatially correlates with hydrated areas of the slab and overlying continental mantle, with the exception of the cluster within the flat slab segment. In this region, earthquakes are likely triggered by flexural processes where the slab changes from a flat to a steep subduction angle.
First-order variations in the observed tectonic patterns also seem to be influenced by the thermomechanical configuration of the lithosphere. The mechanically strong domains of the forearc and foreland, due to their resistance to deformation, display smaller amounts of shortening than the relatively weak orogenic domain. In addition, the structural and thermomechanical characteristics modelled in this dissertation confirm previous analyses from geodynamic models pointing to the control of the observed heterogeneities in the orogen and foreland deformation style. These characteristics include the lithospheric and crustal thickness, the presence of weak sediments and the variations in gravitational potential energy.
Specific conditions occur in the cold and strong northern foreland, which is characterized by active seismicity and thick-skinned structures, although the modelled crustal strength exceeds the typical values of externally-applied tectonic stresses. The additional mechanisms that could explain the strain localization in a region that should resist deformation are: (i) increased tectonic forces coming from the steepening of the slab and (ii) enhanced weakening along inherited structures from pre-Andean deformation events. Finally, the thermomechanical conditions of this sector of the foreland could be a key factor influencing the preservation of the flat subduction angle at these latitudes of the SCA.
Complete protection against flood risks by structural measures is impossible. Therefore flood prediction is important for flood risk management. Good explanatory power of flood models requires a meaningful representation of bio-physical processes. Therefore great interest exists to improve the process representation. Progress in hydrological process understanding is achieved through a learning cycle including critical assessment of an existing model for a given catchment as a first step. The assessment will highlight deficiencies of the model, from which useful additional data requirements are derived, giving a guideline for new measurements. These new measurements may in turn lead to improved process concepts. The improved process concepts are finally summarized in an updated hydrological model. In this thesis I demonstrate such a learning cycle, focusing on the advancement of model evaluation methods and more cost effective measurements. For a successful model evaluation, I propose that three questions should be answered: 1) when is a model reproducing observations in a satisfactory way? 2) If model results deviate, of what nature is the difference? And 3) what are most likely the relevant model components affecting these differences? To answer the first two questions, I developed a new method to assess the temporal dynamics of model performance (or TIGER - TIme series of Grouped Errors). This method is powerful in highlighting recurrent patterns of insufficient model behaviour for long simulation periods. I answered the third question with the analysis of the temporal dynamics of parameter sensitivity (TEDPAS). For calculating TEDPAS, an efficient method for sensitivity analysis is necessary. I used such an efficient method called Fourier Amplitude Sensitivity Test, which has a smart sampling scheme. Combining the two methods TIGER and TEDPAS provided a powerful tool for model assessment. With WaSiM-ETH applied to the Weisseritz catchment as a case study, I found insufficient process descriptions for the snow dynamics and for the recession during dry periods in late summer and fall. Focusing on snow dynamics, reasons for poor model performance can either be a poor representation of snow processes in the model, or poor data on snow cover, or both. To obtain an improved data set on snow cover, time series of snow height and temperatures were collected with a cost efficient method based on temperature measurements on multiple levels at each location. An algorithm was developed to simultaneously estimate snow height and cold content from these measurements. Both, snow height and cold content are relevant quantities for spring flood forecasting. Spatial variability was observed at the local and the catchment scale with an adjusted sampling design. At the local scale, samples were collected on two perpendicular transects of 60 m length and analysed with geostatistical methods. The range determined from fitted theoretical variograms was within the range of the sampling design for 80% of the plots. No patterns were found, that would explain the random variability and spatial correlation at the local scale. At the watershed scale, locations of the extensive field campaign were selected according to a stratified sample design to capture the combined effects of elevation, aspect and land use. The snow height is mainly affected by the plot elevation. The expected influence of aspect and land use was not observed. To better understand the deficiencies of the snow module in WaSiM-ETH, the same approach, a simple degree day model was checked for its capability to reproduce the data. The degree day model was capable to explain the temporal variability for plots with a continuous snow pack over the entire snow season, if parameters were estimated for single plots. However, processes described in the simple model are not sufficient to represent multiple accumulation-melt-cycles, as observed for the lower catchment. Thus, the combined spatio-temporal variability at the watershed scale is not captured by the model. Further tests on improved concepts for the representation of snow dynamics at the Weißeritz are required. From the data I suggest to include at least rain on snow and redistribution by wind as additional processes to better describe spatio-temporal variability. Alternatively an energy balance snow model could be tested. Overall, the proposed learning cycle is a useful framework for targeted model improvement. The advanced model diagnostics is valuable to identify model deficiencies and to guide field measurements. The additional data collected throughout this work helps to get a deepened understanding of the processes in the Weisseritz catchment.
Predator-prey interactions provide central links in food webs. These interaction are directly or indirectly impacted by a number of factors. These factors range from physiological characteristics of individual organisms, over specifics of their interaction to impacts of the environment. They may generate the potential for the application of different strategies by predators and prey. Within this thesis, I modelled predator-prey interactions and investigated a broad range of different factors driving the application of certain strategies, that affect the individuals or their populations. In doing so, I focused on phytoplankton-zooplankton systems as established model systems of predator-prey interactions.
At the level of predator physiology I proposed, and partly confirmed, adaptations to fluctuating availability of co-limiting nutrients as beneficial strategies. These may allow to store ingested nutrients or to regulate the effort put into nutrient assimilation. We found that these two strategies are beneficial at different fluctuation frequencies of the nutrients, but may positively interact at intermediate frequencies. The corresponding experiments supported our model results. We found that the temporal structure of nutrient fluctuations indeed has strong effects on the juvenile somatic growth rate of {\itshape Daphnia}.
Predator colimitation by energy and essential biochemical nutrients gave rise to another physiological strategy. High-quality prey species may render themselves indispensable in a scenario of predator-mediated coexistence by being the only source of essential biochemical nutrients, such as cholesterol. Thereby, the high-quality prey may even compensate for a lacking defense and ensure its persistence in competition with other more defended prey species.
We found a similar effect in a model where algae and bacteria compete for nutrients. Now, being the only source of a compound that is required by the competitor (bacteria) prevented the competitive exclusion of the algae. In this case, the essential compounds were the organic carbon provided by the algae. Here again, being indispensable served as a prey strategy that ensured its coexistence.
The latter scenario also gave rise to the application of the two metabolic strategies of autotrophy and heterotrophy by algae and bacteria, respectively. We found that their coexistence allowed the recycling of resources in a microbial loop that would otherwise be lost. Instead, these resources were made available to higher trophic levels, increasing the trophic transfer efficiency in food webs.
The predation process comprises the next higher level of factors shaping the predator-prey interaction, besides these factors that originated from the functioning or composition of individuals. Here, I focused on defensive mechanisms and investigated multiple scenarios of static or adaptive combinations of prey defense and predator offense. I confirmed and extended earlier reports on the coexistence-promoting effects of partially lower palatability of the prey community. When bacteria and algae are coexisting, a higher palatability of bacteria may increase the average predator biomass, with the side effect of making the population dynamics more regular. This may facilitate experimental investigations and interpretations. If defense and offense are adaptive, this allows organisms to maximize their growth rate. Besides this fitness-enhancing effect, I found that co-adaptation may provide the predator-prey system with the flexibility to buffer external perturbations.
On top of these rather internal factors, environmental drivers also affect predator-prey interactions. I showed that environmental nutrient fluctuations may create a spatio-temporal resource heterogeneity that selects for different predator strategies. I hypothesized that this might favour either storage or acclimation specialists, depending on the frequency of the environmental fluctuations.
We found that many of these factors promote the coexistence of different strategies and may therefore support and sustain biodiversity. Thus, they might be relevant for the maintenance of crucial ecosystem functions that also affect us humans. Besides this, the richness of factors that impact predator-prey interactions might explain why so many species, especially in the planktonic regime, are able to coexist.
Semiaride Gebiete sind hauptsächlich durch geringe Wasserressourcen gekennzeichnet und unterliegen häufig dem Risiko der Wasserknappheit. In diesen Gebieten ist die Wasserbereitstellung für Bewässerung und Trinkwasserversorgung stark von der oberflächlichen Speicherung in Stauseen abhängig, deren Wasserverfügbarkeit nachteilig durch Sedimentablagerung beeinflusst wird. Zur Wiedergabe des komplexen Sedimentablagerungsverhaltens in Stauseen von semiariden Gebieten und die Auswirkungen von Sedimentmanagementmaßnahmen wird ein Sedimentationsmodell entwickelt und mit dem WASA-SED Modell gekoppelt, das für die Modellierung der Abflussbildung und des Sedimenttransportes in Einzugsgebieten geeignet ist. Das Sedimentationsmodell beinhaltet zwei Ansätze, die unter der Berücksichtigung verschiedener Stauseengrößenklassen und Datenverfügbarkeit eingesetzt werden können. Für die Stauseen mit verfügbaren Informationen über ihre geometrischen Eigenschaften (wie Stauseetopographie und Höhe-Fläche-Volumen-Beziehung) und weitere Kenngrößen wie Ablagerungsmächtigkeit, Korngrößenverteilung und Sedimentdichte, kann ein detaillierter Modellansatz für die Sedimentablagerung verwendet werden. Wo diese Informationen nicht verfügbar sind, wird auf einen vereinfachten Ansatz zurückgegriffen. Der detaillierte Modellansatz ermöglicht die Betrachtung von Ablagerungsmustern im Stausee und Einschätzungen über die Effektivität von Sedimentmanagementmaßnahmen hinsichtlich der Sedimententlastung. Dieser Ansatz beruht auf der Simulation des Sedimenttransportes entlang eines Stauseelängsprofils. Für die Berechnung des Sedimenttransfers wird der Stauseekörper in einer Folge von Querprofilen repräsentiert. Der Sedimenttransport wird dabei korngrößenspezifisch entsprechend der Transportkapazität berechnet. Dafür stehen vier verschiedenen Sedimenttransportgleichungen zur Verfügung. Der vereinfachte Modellansatz ist für die Simulation des Sedimenttransfers in Gebieten mit hoher Stauseedichte geeignet, jedoch können weder Sedimentmanagementmaßnahmen noch die räumliche Verteilung der Ablagerungen berücksichtigt werden. Dafür werden die Stauseen in Abhängigkeit von ihrer Größe und Position in kleine und strategische Stauseen unterteilt. Dabei sind strategische Stausseen solche mit mittlerem bis großem Volumen sowie einer Lage im Hauptgerinne oder solche mit sonstiger besonderer Bedeutung. Kleine Stauseen hingegen befinden sich an den Nebenflüssen und werden im Modell in aggregierter Form durch ihre Einteilung in Stauseegrößenklassen repräsentiert. Ein Kaskadenverfahren wird für den Wasser- und Sedimentlauf zwischen den Stauseeklassen verwendet. Dabei werden für jede Stauseeklasse der Wasser- sowie Sedimenthaushalt für einen hypothetischen repräsentativen Stausee mit mittleren Eigenschaften berechnet. Die Sedimentaufnahme und die Korngrößenverteilung des abgegebenen Sediments werden mit dem Überlaufanteil-Ansatz berechnet. In dieser Studie werden drei Modellanwendungen vorgestellt: • Für den 92,2 Mio.m³-großen Barasona-Stausee (Vorland der Zentralpyrenäen, Aragon, Spanien) wird die Modellierung der Sedimentablagerung mit dem detaillierten Modellansatz vorgenommen. Die Kalibrierung dafür wurde in zwei Schritten durchgeführt, um Änderungen im Stauseemanagement Rechnung zu tragen. Die ModellValidierung wird schließlich für eine andere Simulationsperiode vorgenommen. Dabei wird ersichtlich, dass die Prozesse der Sedimentablagerung gut durch das Modell wiedergegeben werden. • Das Modell wird auf das 933 km²-große Benguê-Einzugsgebiet, das sich im semiariden Nordosten Brasiliens befindet, angewendet. Dieses Einzugsgebiet ist durch eine hohe Dichte an kleinen Stauseen, charakterisiert, die fast 45% des Gebietes umfasst, wofür jedoch wenige Messdaten verfügbar sind. Deshalb werden der Wasser- und Sedimenttransport mit dem vereinfachten Modellansatz berechnet. Dabei werden drei Konfigurationen des Kaskadenverfahrens getestet. • Die Modellanwendung erfolgt erneut für den Barasona-Stausee bezüglich der Effektivität der Sedimentmanagementmaßnahmen. Eine Kostenanalyse ermöglicht die Auswahl geeigneter Maßnahmen für den Stausee. Dadurch wird eine Beurteilung der verschiedenen Sedimentmanagementstrategien ermöglicht. Im Allgemeinen unterliegen die Simulationsergebnisse großen Unsicherheiten, teilweise wegen der geringen Datenverfügbarkeit, andererseits durch die Unsicherheiten in der Modellstruktur zur korrekten Wiedergabe der Sedimentablagerungsprozesse.
Functional traits determine biomass dynamics, coexistence and energetics in plankton food webs
(2022)
Plankton food webs are the basis of marine and limnetic ecosystems. Especially aquatic ecosystems of high biodiversity provide important ecosystem services for humankind as providers of food, coastal protection, climate regulation, and tourism. Understanding the dynamics of biomass and coexistence in these food webs is a first step to understanding the ecosystems. It also lays the foundation for the development of management strategies for the maintenance of the marine and freshwater biodiversity despite anthropogenic influences.
Natural food webs are highly complex, and thus often equally complex methods are needed to analyse and understand them well. Models can help to do so as they depict simplified parts of reality. In the attempt to get a broader understanding of the complex food webs, diverse methods are used to investigate different questions.
In my first project, we compared the energetics of a food chain in two versions of an allometric trophic network model. In particular, we solved the problem of unrealistically high trophic transfer efficiencies (up to 70%) by accounting for both basal respiration and activity respiration, which decreased the trophic transfer efficiency to realistic values of ≤30%. Next in my second project I turned to plankton food webs and especially phytoplankton traits. Investigating a long-term data set from Lake Constance we found evidence for a trade-off between defence and growth rate in this natural phytoplankton community. I continued working with this data set in my third project focusing on ciliates, the main grazer of phytoplankton in spring. Boosted regression trees revealed that temperature and predators have the highest influence on net growth rates of ciliates. We finally investigated in my fourth project a food web model inspired by ciliates to explore the coexistence of plastic competitors and to study the new concept of maladaptive switching, which revealed some drawbacks of plasticity: faster adaptation led to higher maladaptive switching towards undefended phenotypes which reduced autotroph biomass and coexistence and increased consumer biomass.
It became obvious that even well-established models should be critically questioned as it is important not to forget reality on the way to a simplistic model. The results showed furthermore that long-term data sets are necessary as they can help to disentangle complex natural processes. Last, one should keep in mind that the interplay between models and experiments/ field data can deliver fruitful insights about our complex world.
Lake ecosystems across the globe have responded to climate warming of recent decades. However, correctly attributing observed changes to altered climatic conditions is complicated by multiple anthropogenic influences on lakes. This thesis contributes to a better understanding of climate impacts on freshwater phytoplankton, which forms the basis of the food chain and decisively influences water quality. The analyses were, for the most part, based on a long-term data set of physical, chemical and biological variables of a shallow, polymictic lake in north-eastern Germany (Müggelsee), which was subject to a simultaneous change in climate and trophic state during the past three decades. Data analysis included constructing a dynamic simulation model, implementing a genetic algorithm to parameterize models, and applying statistical techniques of classification tree and time-series analysis. Model results indicated that climatic factors and trophic state interactively determine the timing of the phytoplankton spring bloom (phenology) in shallow lakes. Under equally mild spring conditions, the phytoplankton spring bloom collapsed earlier under high than under low nutrient availability, due to a switch from a bottom-up driven to a top-down driven collapse. A novel approach to model phenology proved useful to assess the timings of population peaks in an artificially forced zooplankton-phytoplankton system. Mimicking climate warming by lengthening the growing period advanced algal blooms and consequently also peaks in zooplankton abundance. Investigating the reasons for the contrasting development of cyanobacteria during two recent summer heat wave events revealed that anomalously hot weather did not always, as often hypothesized, promote cyanobacteria in the nutrient-rich lake studied. The seasonal timing and duration of heat waves determined whether critical thresholds of thermal stratification, decisive for cyanobacterial bloom formation, were crossed. In addition, the temporal patterns of heat wave events influenced the summer abundance of some zooplankton species, which as predators may serve as a buffer by suppressing phytoplankton bloom formation. This thesis adds to the growing body of evidence that lake ecosystems have strongly responded to climatic changes of recent decades. It reaches beyond many previous studies of climate impacts on lakes by focusing on underlying mechanisms and explicitly considering multiple environmental changes. Key findings show that climate impacts are more severe in nutrient-rich than in nutrient-poor lakes. Hence, to develop lake management plans for the future, limnologists need to seek a comprehensive, mechanistic understanding of overlapping effects of the multi-faceted human footprint on aquatic ecosystems.