Refine
Has Fulltext
- no (19)
Language
- English (19)
Is part of the Bibliography
- yes (19)
Keywords
- DMR (2)
- Fault tolerance (2)
- TMR (2)
- radhard design (2)
- reliability (2)
- (SET) count rate (1)
- ASIC (1)
- Absorbed dose (1)
- Analytical models (1)
- Answer set programming (1)
This paper investigates the applicability of CMOS decoupling cells for mitigating the Single Event Transient (SET) effects in standard combinational gates. The concept is based on the insertion of two decoupling cells between the gate's output and the power/ground terminals. To verify the proposed hardening approach, extensive SPICE simulations have been performed with standard combinational cells designed in IHP's 130 nm bulk CMOS technology. Obtained simulation results have shown that the insertion of decoupling cells results in the increase of the gate's critical charge, thus reducing the gate's soft error rate (SER). Moreover, the decoupling cells facilitate the suppression of SET pulses propagating through the gate. It has been shown that the decoupling cells may be a competitive alternative to gate upsizing and gate duplication for hardening the gates with lower critical charge and multiple (3 or 4) inputs, as well as for filtering the short SET pulses induced by low-LET particles.
Instruments for measuring the absorbed dose and dose rate under radiation exposure, known as radiation dosimeters, are indispensable in space missions. They are composed of radiation sensors that generate current or voltage response when exposed to ionizing radiation, and processing electronics for computing the absorbed dose and dose rate. Among a wide range of existing radiation sensors, the Radiation Sensitive Field Effect Transistors (RADFETs) have unique advantages for absorbed dose measurement, and a proven record of successful exploitation in space missions. It has been shown that the RADFETs may be also used for the dose rate monitoring. In that regard, we propose a unique design concept that supports the simultaneous operation of a single RADFET as absorbed dose and dose rate monitor. This enables to reduce the cost of implementation, since the need for other types of radiation sensors can be minimized or eliminated. For processing the RADFET's response we propose a readout system composed of analog signal conditioner (ASC) and a self-adaptive multiprocessing system-on-chip (MPSoC). The soft error rate of MPSoC is monitored in real time with embedded sensors, allowing the autonomous switching between three operating modes (high-performance, de-stress and fault-tolerant), according to the application requirements and radiation conditions.
This study investigates the use of pulse stretching (skew-sized) inverters for monitoring the variation of count rate and linear energy transfer (LET) of energetic particles. The basic particle detector is a cascade of two pulse stretching inverters, and the required sensing area is obtained by connecting up to 12 two-inverter cells in parallel and employing the required number of parallel arrays. The incident particles are detected as single-event transients (SETs), whereby the SET count rate denotes the particle count rate, while the SET pulsewidth distribution depicts the LET variations. The advantage of the proposed solution is the possibility to sense the LET variations using fully digital processing logic. SPICE simulations conducted on IHP's 130-nm CMOS technology have shown that the SET pulsewidth varies by approximately 550 ps over the LET range from 1 to 100 MeV center dot cm(2) center dot mg(-1). The proposed detector is intended for triggering the fault-tolerant mechanisms within a self-adaptive multiprocessing system employed in space. It can be implemented as a standalone detector or integrated in the same chip with the target system.
We present a method employing Answer Set Programming in combination with Approximate Model Counting for fast and accurate calculation of error propagation probabilities in digital circuits. By an efficient problem encoding, we achieve an input data format similar to a Verilog netlist so that extensive preprocessing is avoided. By a tight interconnection of our application with the underlying solver, we avoid iterating over fault sites and reduce calls to the solver. Several circuits were analyzed with varying numbers of considered cycles and different degrees of approximation. Our experiments show, that the runtime can be reduced by approximation by a factor of 91, whereas the error compared to the exact result is below 1%.
The intensity of cosmic radiation may differ over five orders of magnitude within a few hours or days during the Solar Particle Events (SPEs), thus increasing for several orders of magnitude the probability of Single Event Upsets (SEUs) in space-borne electronic systems. Therefore, it is vital to enable the early detection of the SEU rate changes in order to ensure timely activation of dynamic radiation hardening measures. In this paper, an embedded approach for the prediction of SPEs and SRAM SEU rate is presented. The proposed solution combines the real-time SRAM-based SEU monitor, the offline-trained machine learning model and online learning algorithm for the prediction. With respect to the state-of-the-art, our solution brings the following benefits: (1) Use of existing on-chip data storage SRAM as a particle detector, thus minimizing the hardware and power overhead, (2) Prediction of SRAM SEU rate one hour in advance, with the fine-grained hourly tracking of SEU variations during SPEs as well as under normal conditions, (3) Online optimization of the prediction model for enhancing the prediction accuracy during run-time, (4) Negligible cost of hardware accelerator design for the implementation of selected machine learning model and online learning algorithm. The proposed design is intended for a highly dependable and self-adaptive multiprocessing system employed in space applications, allowing to trigger the radiation mitigation mechanisms before the onset of high radiation levels.
This work introduces an embedded approach for the prediction of Solar Particle Events (SPEs) in space applications by combining the real-time Soft Error Rate (SER) measurement with SRAM-based detector and the offline trained machine learning model. The proposed approach is intended for the self-adaptive fault-tolerant multiprocessing systems employed in space applications. With respect to the state-of-the-art, our solution allows for predicting the SER 1 h in advance and fine-grained hourly tracking of SER variations during SPEs as well as under normal conditions. Therefore, the target system can activate the appropriate mechanisms for radiation hardening before the onset of high radiation levels. Based on the comparison of five different machine learning algorithms trained with the public space flux database, the preliminary results indicate that the best prediction accuracy is achieved with the recurrent neural network (RNN) with long short-term memory (LSTM).
Full error detection and correction method applied on pipelined structure using two approaches
(2020)
In this paper, two approaches are evaluated using the Full Error Detection and Correction (FEDC) method for a pipelined structure. The approaches are referred to as Full Duplication with Comparison (FDC) and Concurrent Checking with Parity Prediction (CCPP). Aforementioned approaches are focused on the borderline cases of FEDC method which implement Error Detection Circuit (EDC) in two manners for the purpose of protection of combinational logic to address the soft errors of unspecified duration. The FDC approach implements a full duplication of the combinational circuit, as the most complex and expensive implementation of the FEDC method, and the CCPP approach implements only the parity prediction bit, being the simplest and cheapest technique, for soft error detection. Both approaches are capable of detecting soft errors in the combinational logic, with single faults being injected into the design. On the one hand, the FDC approach managed to detect and correct all injected faults while the CCPP approach could not detect multiple faults created at the output of combinational circuit. On the other hand, the FDC approach leads to higher power consumption and area increase compared to the CCPP approach.
The simultaneous switching activity in digital circuits challenges the design of mixed-signal SoCs. Rather than focusing on time-domain noise voltage minimization, this work optimizes switching noise in the frequency domain. A two-tier solution based on the on-chip clock scheduling is proposed. First, to cope with the switching noise at the fundamental clock frequency, which usually dominates in terms of noise power, a two-phase clocking scheme is employed for system timing. Second, on-chip clock latencies are manipulated to target harmonic peaks in specific frequency bands for the spectral noise optimization. An automated design flow, which allows for noise optimization in user-defined application-specific frequency bands, is developed. The effectiveness of our design solution is validated by measurements of substrate noise and conductive EMI (electromagnetic interference) noise on a test chip, which consists of four wireless sensor node baseband processors each addressing a distinct clock-tree-synthesis strategy. Compared to the reference synchronous design, the proposed clock scheduling solution substantially reduces noise in the target GSM-850 band, i.e., by 11.1 dB on the substrate noise and 12.9 dB on the EMI noise, along with dramatic noise peak drops measured at the 50-MHz clock frequency.
This paper proposes an education approach for master and bachelor students to enhance their skills in the area of reliability, safety and security of the electronic components in automated driving. The approach is based on the active synergetic work of research institutes, academia and industry in the frame of joint lab. As an example, the jointly organized summer school with the respective focus is organized and elaborated.
In this paper two new methods for the design of fault-tolerant pipelined sequential and combinational circuits, called Error Detection and Partial Error Correction (EDPEC) and Full Error Detection and Correction (FEDC), are described. The proposed methods are based on an Error Detection Logic (EDC) in the combinational circuit part combined with fault tolerant memory elements implemented using fault tolerant master-slave flip-flops. If a transient error, due to a transient fault in the combinational circuit part is detected by the EDC, the error signal controls the latching stage of the flip-flops such that the previous correct state of the register stage is retained until the transient error disappears. The system can continue to work in its previous correct state and no additional recovery procedure (with typically reduced clock frequency) is necessary. The target applications are dataflow processing blocks, for which software-based recovery methods cannot be easily applied. The presented architectures address both single events as well as timing faults of arbitrarily long duration. An example of this architecture is developed and described, based on the carry look-ahead adder. The timing conditions are carefully investigated and simulated up to the layout level. The enhancement of the baseline architecture is demonstrated with respect to the achieved fault tolerance for the single event and timing faults. It is observed that the number of uncorrected single events is reduced by the EDPEC architecture by 2.36 times compared with previous solution. The FEDC architecture further reduces the number of uncorrected events to zero and outperforms the Triple Modular Redundancy (TMR) with respect to correction of timing faults. The power overhead of both new architectures is about 26-28% lower than the TMR. (C) 2015 Elsevier Ltd. All rights reserved.