Refine
Year of publication
Document Type
- Article (249)
- Postprint (16)
- Review (4)
- Other (2)
- Part of Periodical (2)
Is part of the Bibliography
- yes (273) (remove)
Keywords
- perovskite solar cells (15)
- organic solar cells (13)
- photoluminescence (6)
- morphology (5)
- voltage losses (5)
- Organic solar cells (4)
- charge generation (4)
- charge transport (4)
- conjugated polymers (4)
- non-fullerene acceptors (4)
The effect of oxygen plasma treatment and/or silanization with hexamethyldisilazane (HMDS) on the surface chemistry and the morphology of the SiO2-gate insulator were studied with respect to the performance of organic field effect transistors. Using X-ray photoelectron spectroscopy (XPS), it is shown that silanization leads to the growth of a polysiloxane interfacial layer and that longer silanization times increase the thickness of this layer. Most important, silanization reduces the signal from surface contaminations such as oxidized hydrocarbon molecules. In fact, the lowest concentration of these contaminations was found after a combined oxygen plasma/silanization treatment. The results of these investigations were correlated with the characteristic device parameters of polymer field effect transistors with poly(3-hexylthiophene)s as the semiconducting layer. We found that the field effect mobility correlates with the concentration of contaminations as measured by XPS. We, finally, demonstrate that silanization significantly improves the operational stability of the device in air compared to the untreated devices
The optical, structural, and electrical properties of thin layers made from poly(3-hexylthiophene) (P3HT) samples of different molecular weights are presented. As reported in a previous paper by Kline et al., Adv. Mater 2003, 15, 1519, the mobilities of these layers are a strong function of the molecular weight, with the largest mobility found for the largest molecular weight. Atomic force microscopy studies reveal a complex polycrystalline morphology which changes considerably upon annealing. X-ray studies show the occurrence of a layered phase for all P3HT fractions, especially after annealing at 1.50 degreesC . However, there is no clear correlation between the differences in the transport properties and the data from structural investigations. In order to reveal the processes limiting the mobility in these layers, the transistor properties were investigated as a function of temperature. The mobility decreases continuously with increasing temperatures; with the same trend pronounced thermochromic effects of the P3HT films occur. Apparently, the polymer chains adopt a more twisted, disordered conformation at higher temperatures, leading to interchain transport barriers. We conclude that the backbone conformation of the majority of the bulk material rather than the crystallinity of the layer is the most crucial parameter controlling the charge transport in these P3HT layers. This interpretation is supported by the significant blue-shift of the solid-state absorption spectra with decreasing molecular weight, which is indicative of a larger distortion of the P3HT backbone in the low-molecular weight P3HT layers
The performance of highly soluble regioregular poly[ (3-hexylthiophene)-co-(3-octylthiophetie)] (P3HTOT) as a semiconducting material in organic field-effect transistors (OFETs) is presented in comparison to that of the corresponding homopolymers. Transistors made from as-prepared layers of P3HTOT exhibit a mobility of ca. 7 x 10(-3) cm(2) V-1 s(-1), which is comparable to the performance of transistors made from as-prepared poly(3-hexylthiophene) (P3HT) and almost 6 times larger than the mobility of transistors prepared with poly(3-octylthiophene) (P3OT). On the other hand, the solubility parameter delta(p) of P3HTOT is close to that of the highly soluble P3OT. Moreover, compared to a physical blend of poly(3-hexylthiophene) and poly(3-octylthiophene), the mobility of P3HTOT devices is almost twice as large and the performance does not degrade upon annealing at elevated temperatures. Therefore, the copolymer approach outlined here may be one promising step toward an optimum balance between a Sufficient processability of the polymers from common organic solvents, a high solid state order, and applicable OFET performances
Recently, two different groups have reported independently that the mobility of field-effect transistors made from regioregular poly(3-hexylthiophene) (P3HT) increases strongly with molecular weight. Two different models were presented: one proposing carrier trapping at grain boundaries and the second putting emphasis on the conformation and packing of the polymer chains in the thin layers for different molecular weights. Here, we present the results of detailed investigations of powders and thin films of deuterated P3HT fractions with different molecular weight. For powder samples, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) were used to investigate the structure and crystallization behavior of the polymers. The GPC investigations show that all weight fractions possess a rather broad molecular weight distribution. DSC measurements reveal a strong decrease of the crystallization temperature and, most important, a significant decrease of the degree of crystallinity with decreasing molecular weight. To study the structure of thin layers in lateral and vertical directions, both transmission electron microscopy (TEM) and X-ray grazing incidence diffraction (GID) were utilized. These methods show that thin layers of the low molecular weight fraction consist of well-defined crystalline domains embedded in a disordered matrix. We propose that the transport properties of layers prepared from fractions of poly(3-hexylthiophene) with different molecular weight are largely determined by the crystallinity of the samples and not by the perfection of the packing of the chains in the individual crystallites
2D Ruddlesden-Popper perovskite (RPP) solar cells have excellent environmental stability. However, the power conversion efficiency (PCE) of RPP cells remains inferior to 3D perovskite-based cells. Herein, 2D (CH3(CH2)(3)NH3)(2)(CH3NH3)(n-1)PbnI3n+1 perovskite cells with different numbers of [PbI6](4-) sheets (n = 2-4) are analyzed. Photoluminescence quantum yield (PLQY) measurements show that nonradiative open-circuit voltage (V-OC) losses outweigh radiative losses in materials with n > 2. The n = 3 and n = 4 films exhibit a higher PLQY than the standard 3D methylammonium lead iodide perovskite although this is accompanied by increased interfacial recombination at the top perovskite/C-60 interface. This tradeoff results in a similar PLQY in all devices, including the n = 2 system where the perovskite bulk dominates the recombination properties of the cell. In most cases the quasi-Fermi level splitting matches the device V-OC within 20 meV, which indicates minimal recombination losses at the metal contacts. The results show that poor charge transport rather than exciton dissociation is the primary reason for the reduction in fill factor of the RPP devices. Optimized n = 4 RPP solar cells had PCEs of 13% with significant potential for further improvements.
Engineering the interface between the perovskite absorber and the charge-transporting layers has become an important method for improving the charge extraction and open-circuit voltage (V-OC) of hybrid perovskite solar cells. Conjugated polymers are particularly suited to form the hole-transporting layer, but their hydrophobicity renders it difficult to solution-process the perovskite absorber on top. Herein, oxygen plasma treatment is introduced as a simple means to change the surface energy and work function of hydrophobic polymer interlayers for use as p-contacts in perovskite solar cells. We find that upon oxygen plasma treatment, the hydrophobic surfaces of different prototypical p-type polymers became sufficiently hydrophilic to enable subsequent perovskite junction processing. In addition, the oxygen plasma treatment also increased the ionization potential of the polymer such that it became closer to the valance band energy of the perovskite. It was also found that the oxygen plasma treatment could increase the electrical conductivity of the p-type polymers, facilitating more efficient charge extraction. On the basis of this concept, inverted MAPbI(3) perovskite devices with different oxygen plasma-treated polymers such as P3HT, P3OT, polyTPD, or PTAA were fabricated with power conversion efficiencies of up to 19%.
Bildung:digital
(2024)
Heute Morgen schon im Bett geswiped, geliked oder gepostet? Auf Arbeit an einer Video-Konferenz teilgenommen, eine Datenbank benutzt oder programmiert? Auf dem Heimweg schnell noch im Laden mit dem Smartphone bezahlt, Podcasts gehört und die Ausleihe der Bibliotheksbücher verlängert? Und abends auf der Couch mit dem Tablet auf ELSTER.de die Steuererklärung ausgefüllt, online geshoppt oder Rechnungen bezahlt, ehe die Streaming-Plattform mit einer Serie lockt?
Unser Leben ist durch und durch digitalisiert. Diese Veränderungen machen vieles schneller, leichter, effizienter. Doch damit Schritt zu halten, verlangt uns einiges ab und gelingt beileibe nicht allen. Es gibt Menschen, die für eine Überweisung lieber zur Bank gehen, das Programmieren den Experten überlassen, die Steuererklärung per Post schicken und das Smartphone nur zum Telefonieren benutzen. Sie wollen nicht, vielleicht können sie auch nicht. Haben es nicht gelernt. Andere, jüngere Menschen, wachsen als „Digital Natives“ inmitten digitaler Geräte, Tools und Prozesse auf. Aber können sie deshalb wirklich damit umgehen? Oder brauchen auch sie digitale Bildung?
Aber wie sieht erfolgreiche digitale Bildung eigentlich aus? Lernen wir dabei ein Tablet zu bedienen, richtig zu googeln und Excel-Tabellen zu schreiben? Möglicherweise geht es um mehr: darum, den umfassenden Wandel zu verstehen, der unsere Welt erfasst, seitdem sie in Einsen und Nullen zerlegt und virtuell neu aufgebaut wird. Aber wie lernen wir, in einer Welt der Digitalität zu leben – mit allem, was dazu gehört und zu unserem Nutzen? Für die aktuelle Ausgabe der „Portal Wissen“ haben wir uns an der Universität Potsdam umgeschaut, welche Rolle die Verbindung von Digitalisierung und Lernen in der Forschung der verschiedenen Disziplinen spielt: Wir haben mit Katharina Scheiter, Professorin für digitale Bildung, über die Zukunft in deutschen Schulen gesprochen und uns gleich von mehreren Expert*innen Beispiele dafür zeigen lassen, wie digitale Instrumente schulisches Lernen, aber auch Weiterbildung im Berufsleben verbessern können. Außerdem haben uns Forschende aus Informatik und Agrarforschung vorgeführt, wie auch gestandene Landwirte dank digitaler Hilfsmittel noch viel über ihr Land und ihre Arbeit lernen können. Wir haben mit Bildungsforschenden gesprochen, die mithilfe von Big Data analysieren, wie Jungen und Mädchen lernen und wo mögliche Ursachen für Unterschiede zu suchen sind. Die Bildungsund Politikwissenschaftlerin Nina Kolleck wiederum schaut auf Bildung vor dem Hintergrund der Globalisierung und setzt dabei auf die Auswertung von großen Mengen Social-Media- Daten.
Dabei verlieren wir natürlich die Vielfalt der Forschung an der Uni Potsdam nicht aus den Augen: Wir stellen der Strafrechtlerin Anna Albrecht 33 Fragen, begleiten eine Gruppe von Geoforschenden in den Himalaya und lassen uns erklären, welche Alternativen es bald zu Antibiotika geben könnte. Außerdem geht es in diesem Magazin um Stress und wie er uns krankmacht, die Forschung zu nachhaltiger Erzgewinnung und neue Ansätze in der Schulentwicklung.
Neu ist auch eine ganze Reihe kürzerer Beiträge, die zum Blättern und Schmökern einladen: von Forschungsnews und Personalia- Infos über fotografische Einblicke in Labore, einfache Erklärungen komplexer Phänomene und Ausblicke in die weite Forschungswelt bis hin zu einer kleinen Wissenschaftsutopie, einem persönlichen Dank an die Forschung und einem Wissenschaftscomic. All das im Namen der Bildung, versteht sich. Viel Vergnügen bei der Lektüre!
Photovoltaic cells based on halide perovskites, possessing remarkably high power conversion efficiencies have been reported. To push the development of such devices further, a comprehensive and reliable understanding of their electronic properties is essential but presently not available. To provide a solid foundation for understanding the electronic properties of polycrystalline thin films, we employ single-crystal band structure data from angle-resolved photoemission measurements. For two prototypical perovskites (CH3NH3PbBr3 and CH3NH3PbI3), we reveal the band dispersion in two high-symmetry directions and identify the global valence band maxima. With these benchmark data, we construct "standard" photoemission spectra from polycrystalline thin film samples and resolve challenges discussed in the literature for determining the valence band onset with high reliability. Within the framework laid out here, the consistency of relating the energy level alignment in perovskite-based photovoltaic and optoelectronic devices with their functional parameters is substantially enhanced.