Refine
Year of publication
- 2006 (91) (remove)
Document Type
- Article (64)
- Doctoral Thesis (18)
- Postprint (8)
- Other (1)
Keywords
- polyelectrolyte (4)
- Fluoreszenz-Resonanz-Energie-Transfer (3)
- Immunoassay (3)
- Nanopartikel (3)
- microemulsion (3)
- Energietransfer (2)
- FRET (2)
- Lumineszenz (2)
- Quantenpunkt (2)
- nanoparticles (2)
Institute
- Institut für Chemie (91) (remove)
Recently, two different groups have reported independently that the mobility of field-effect transistors made from regioregular poly(3-hexylthiophene) (P3HT) increases strongly with molecular weight. Two different models were presented: one proposing carrier trapping at grain boundaries and the second putting emphasis on the conformation and packing of the polymer chains in the thin layers for different molecular weights. Here, we present the results of detailed investigations of powders and thin films of deuterated P3HT fractions with different molecular weight. For powder samples, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) were used to investigate the structure and crystallization behavior of the polymers. The GPC investigations show that all weight fractions possess a rather broad molecular weight distribution. DSC measurements reveal a strong decrease of the crystallization temperature and, most important, a significant decrease of the degree of crystallinity with decreasing molecular weight. To study the structure of thin layers in lateral and vertical directions, both transmission electron microscopy (TEM) and X-ray grazing incidence diffraction (GID) were utilized. These methods show that thin layers of the low molecular weight fraction consist of well-defined crystalline domains embedded in a disordered matrix. We propose that the transport properties of layers prepared from fractions of poly(3-hexylthiophene) with different molecular weight are largely determined by the crystallinity of the samples and not by the perfection of the packing of the chains in the individual crystallites
The crude methanol extract of the seeds of Derris trifoliata showed potent and dose dependent larvicidal activity against the 2nd instar larvae of Aedes aegypti. From this extract two unusual rotenoid derivatives, a rotenoloid (named 7a-O-methyl-12a-hydroxydeguelol) and a spirohomooxarotenoid (named spiro-13-homo-13-oxaelliptone), were isolated and characterised. In addition a rare natural chromanone (6,7-dimethoxy-4-chromanone) and the known rotenoids rotenone, tephrosin and dehydrodeguelin were identified. The structures were assigned on the basis of spectroscopic evidence. The larvicidal activity of the crude extract is mainly due to rotenone. (c) 2006 Elsevier Ltd. All rights reserved
The micelle aggregation numbers (N-agg) of several series of cationic oligomeric surfactants were determined by time-resolved fluorescence quenching (TRFQ) experiments, using advantageously 9,10-dimethylanthracene as fluorophore. The study comprises six dimeric ("gemini"), three trimeric, and two tetrameric surfactants, which are quaternary ammonium chlorides, with medium length spacer groups (C-3-C-6) separating the individual surfactant fragments. Two standard cationic surfactants served as references. The number of hydrophobic chains making up a micellar core is relatively low for the oligomeric surfactants, the spacer length playing an important role. For the dimers, the number decreases from 32 to 21 with increasing spacer length. These numbers decrease further with increasing degree of oligomerization down to values of about 15. As for many conventional ionic surfactants, the micelles of all oligomers studied grow only slightly with the concentration, and they remain in the regime of small micelles up to concentrations of at least 3 wt %.
The properties of a series of well-defined new surfactant oligomers (dimers to tetramers)were examined. From a molecular point of view, these oligomeric surfactants consist of simple monomeric cationic surfactant fragments coupled via the hydrophilic ammonium chloride head groups by spacer groups (different in nature and length). Properties of these cationic surfactant oligomers in aqueous solution such as solubility, micellization and surface activity, micellar size and aggregation number were discussed with respect to the two new molecular variables introduced, i.e. degree of oligomerization and spacer group, in order to establish structure – property relationships. Thus, increasing the degree of oligomerization results in a pronounced decrease of the critical micellization concentration (CMC). Both reduced spacer length and increased spacer hydrophobicity lead to a decrease of the CMC, but to a lesser extent. For these particular compounds, the formed micelles are relatively small and their aggregation number decreases with increasing the degree of oligomerization, increasing spacer length and sterical hindrance. In addition, pseudo-phase diagrams were established for the dimeric surfactants in more complex systems, namely inverse microemulsions, demonstrating again the important influence of the spacer group on the surfactant behaviour. Furthermore, the influence of additives on the property profile of the dimeric compounds was examined, in order to see if the solution properties can be improved while using less material. Strong synergistic effects were observed by adding special organic salts (e.g. sodium salicylate, sodium vinyl benzoate, etc.) to the surfactant dimers in stoichiometric amounts. For such mixtures, the critical aggregation concentration is strongly shifted to lower concentration, the effect being more pronounced for dimers than for analogous monomers. A sharp decrease of the surface tension can also be attained. Many of the organic anions produce viscoelastic solutions when added to the relatively short-chain dimers in aqueous solution, as evidenced by rheological measurements. This behaviour reflects the formation of entangled wormlike micelles due to strong interactions of the anions with the cationic surfactants, decreasing the curvature of the micellar aggregates. It is found that the associative behaviour is enhanced by dimerization. For a given counterion, the spacer group may also induce a stronger viscosifying effect depending on its length and hydrophobicity. Oppositely charged surfactants were combined with the cationic dimers, too. First, some mixtures with the conventional anionic surfactant SDS revealed vesicular aggregates in solution. Also, in view of these catanionic mixtures, a novel anionic dimeric surfactant based on EDTA was synthesized and studied. The synthesis route is relatively simple and the compound exhibits particularly appealing properties such as low CMC and σCMC values, good solubilization capacity of hydrophobic probes and high tolerance to hard water. Noteworthy, mixtures with particular cationic dimers gave rise to viscous solutions, reflecting the micelle growth.
The acinar salivary glands of cockroaches receive a dual innervation from the subesophageal ganglion and the stomatogastric nervous system. Acinar cells are surrounded by a plexus of dopaminergic and serotonergic varicose fibers. In addition, seroton-ergic terminals lie deep in the extracellulor spaces between acinar cells. Excitation-secretion coupling in cockroach salivary glands is stimulated by both dopamine and serotonin. These monoamines cause increases in the intracellular concentrations of cAMP and Ca2+. Stimulation of the glands by serotonin results in the production of a protein-rich saliva, whereas stimulation by dopamine results in saliva that is protein-free. Thus, two elementary secretary processes, namely electrolyte/water secretion and protein secretion, are triggered by different aminergic transmitters. Because of its simplicity and experimental accessibility, cockroach salivary glands have been used extensively as a model system to study the cellular actions of biogenic amines and to examine the pharmacological properties of biogenic amine receptors. In this review, we summarize current knowledge concerning the aminergic control of cockroach salivary glands and discuss our efforts to characterize Periplaneta biogenic amine receptors molecularly
SAXS/WAXS studies were performed in combination with freeze fracture electron microscopy using mixtures of a new Gemini catanionic surfactant (Gem 16-12, formed by two sugar groups bound by a hydrocarbon spacer with 12 carbons and two 16-carbon chains) and the zwitterionic phospholipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine(DPPC) to establish the phase diagram. Gem 16-12 in water forms bilayers with the same amount of hydration water as DPPC. A frozen interdigitated phase with a low hydration number is observed below room temperature. The kinetics of the formation of this crystalline phase is very slow. Above the chain melting temperature, multilayered vesicles are formed. Mixing with DPPC produces mixed bilayers above the corresponding chain melting temperature. At room temperature, partially lamellar aggregates with local nematic order are observed. Splitting of infinite lamellae into discs is linked to immiscibility in frozen state. The ordering process is always accompanied by dehydration of the system. As a consequence, an unusual order-disorder phase transition upon cooling is observed.
The stabilities of the trans (B) and cis (C) tautomeric ring forms that are experimentally observed in the ring- chain tautomeric interconversion of 1-alkyl-3-aryl-2,3-dihydro-1H-naphth[1,2-e][1,3]oxazines has been investigated. Stability differences are explained by the analysis of the natural bond orbital results for the lone pairs of electrons that are on the heteroatoms in the oxazine ring system and by regression analysis of the calculated 13C NMR chemical shift values.
Molecule-detective
(2006)
Biosensors are analytical devices incorporating biological material (receptor) intimately associated with or integrated within a physicochernical transducer. Advantages are the high selectivity for analyte detection. Examples given comprise the very successful commercial blood glucose biosensors made for the self-control by the diabetic patients. Other biosensors are part of an analytic system, including the sensor chips Of surface plasmon resonance or interferometry based devices, piezoelectric or reflectometric sensors capable of direct measurement of mass changes, and thermometric and other reagentless sensors. The development of nanotubes-based devices allows for significant enhancment of the signal-to-noise ratio of the biosensors. A milestone on the way towards miniaturization and parallelization of biosensors is the recently developed and prize-winning electronic DNA chip
Ionic liquids based on imidazolium, pyridinium, and alkylammonium salts were investigated as solvents in free radical polymerization of the model monomer n-butyl methacrylate. The properties of the ionic liquids were systematically varied by changing the length of the alkyl substituents on the cations, and by employing different anions such as tetrafluoroborate, hexafluorophosphate, tosylate, triflate, alkyl sulfates and dimethyl phosphate. Results were compared to analogous polymerizations in toluene and in bulk. The solvents have no detectable influence on polymer tacticity. However, the molar masses obtained and the degree of polymerization, respectively, are very sensitive to the choice of the solvent. The degrees of polymerization are significantly higher when polymerizations were carried out in ionic liquids compared to polymerization in toluene, and can even exceed the values obtained by bulk polymerization. Imidazolium salts unsubstituted at C-2 result in an increase in the degree of polymerization of the poly(butyl methacrylate) with increasing viscosity of these ionic liquids. Methyl substitution at C-2 of the imidazolium ion results in an increase in the viscosity of the ionic liquid and in a viscosity independent degree of polymerization of the poly(butyl methacrylate). Ionic liquids based on imidazolium salts seem preferable over pyridinium and alkylammonium salts because of the higher degree of polymerization of the poly(butyl methacrylate)s obtained in the imidazolium salts. The glass transition temperatures and thermal stabilities are higher for poly(butyl methacrylate)s synthesized in the ionic liquids compared to the polymer made in toluene
Free radical homo- and copolymerization of the highly polar 3-(N-[2-methacryloyloxyethyl]-N,N-dimethylammonio) propane sulfonate with the nonpolar n-butylmethacrylate was investigated in the ionic liquids 1-butyl-3-methyl imidazolium tetrafluoroborate and 1-butyl-3-methylimidazolium hexafluoro phosphate, and compared to analogous polymerizations in standard solvents. Higher molar masses are obtained for the zwitterionic homopolymer when the polymerization is carried out in an ionic liquid compared to the classical reaction in water. Although homopolymerization of the sulfobetain monomer as well as of n-butylmethacrylate results in phase separation during the polymerization process, copolymerization of a stoichiometric ratio of the two monomers in the ionic liquids produced transparent gels indicating that no macrophase separation occurs. The use of ionic liquids as reaction medium improved the copolymerization behavior of the two methacrylates significantly. Whereas only minor amounts of n-butyl methacrylate were incorporated in the copolymer when synthesized in acetonitrile, the content of the non-polar monomer units in the zwitterionic copolymer approached increasingly its content in the polymerization mixture when ionic liquids were employed as solvents