Refine
Has Fulltext
- yes (78) (remove)
Year of publication
Document Type
- Postprint (66)
- Doctoral Thesis (8)
- Article (2)
- Habilitation Thesis (1)
- Master's Thesis (1)
Is part of the Bibliography
- no (78) (remove)
Keywords
- Nanopartikel (4)
- Diodenlaserspektroskopie (3)
- Fluoreszenz-Resonanz-Energie-Transfer (3)
- Immunoassay (3)
- Kohlendioxid (3)
- Lumineszenz (3)
- Energietransfer (2)
- FRET (2)
- Isotopenverhältnis (2)
- Juvenile hormone (2)
Institute
- Institut für Chemie (78) (remove)
Cellulose is the most abundant biopolymer on earth. In this work it has been used, in various forms ranging from wood to fully processed laboratory grade microcrystalline cellulose, to synthesise a variety of metal and metal carbide nanoparticles and to establish structuring and patterning methodologies that produce highly functional nano-hybrids. To achieve this, the mechanisms governing the catalytic processes that bring about graphitised carbons in the presence of iron have been investigated. It was found that, when infusing cellulose with an aqueous iron salt solution and heating this mixture under inert atmosphere to 640 °C and above, a liquid eutectic mixture of iron and carbon with an atom ratio of approximately 1:1 forms. The eutectic droplets were monitored with in-situ TEM at the reaction temperature where they could be seen dissolving amorphous carbon and leaving behind a trail of graphitised carbon sheets and subsequently iron carbide nanoparticles. These transformations turned ordinary cellulose into a conductive and porous matrix that is well suited for catalytic applications. Despite these significant changes on the nanometre scale the shape of the matrix as a whole was retained with remarkable precision. This was exemplified by folding a sheet of cellulose paper into origami cranes and converting them via the temperature treatment in to magnetic facsimiles of those cranes. The study showed that the catalytic mechanisms derived from controlled systems and described in the literature can be transferred to synthetic concepts beyond the lab without loss of generality. Once the processes determining the transformation of cellulose into functional materials were understood, the concept could be extended to other metals and metal-combinations. Firstly, the procedure was utilised to produce different ternary iron carbides in the form of MxFeyC (M = W, Mn). None of those ternary carbides have thus far been produced in a nanoparticle form. The next part of this work encompassed combinations of iron with cobalt, nickel, palladium and copper. All of those metals were also probed alone in combination with cellulose. This produced elemental metal and metal alloy particles of low polydispersity and high stability. Both features are something that is typically not associated with high temperature syntheses and enables to connect the good size control with a scalable process. Each of the probed reactions resulted in phase pure, single crystalline, stable materials. After showing that cellulose is a good stabilising and separating agent for all the investigated types of nanoparticles, the focus of the work at hand is shifted towards probing the limits of the structuring and pattering capabilities of cellulose. Moreover possible post-processing techniques to further broaden the applicability of the materials are evaluated. This showed that, by choosing an appropriate paper, products ranging from stiff, self-sustaining monoliths to ultra-thin and very flexible cloths can be obtained after high temperature treatment. Furthermore cellulose has been demonstrated to be a very good substrate for many structuring and patterning techniques from origami folding to ink-jet printing. The thereby resulting products have been employed as electrodes, which was exemplified by electrodepositing copper onto them. Via ink-jet printing they have additionally been patterned and the resulting electrodes have also been post functionalised by electro-deposition of copper onto the graphitised (printed) parts of the samples. Lastly in a preliminary test the possibility of printing several metals simultaneously and thereby producing finely tuneable gradients from one metal to another have successfully been made. Starting from these concepts future experiments were outlined. The last chapter of this thesis concerned itself with alternative synthesis methods of the iron-carbon composite, thereby testing the robustness of the devolved reactions. By performing the synthesis with partly dissolved scrap metal and pieces of raw, dry wood, some progress for further use of the general synthesis technique were made. For example by using wood instead of processed cellulose all the established shaping techniques available for wooden objects, such as CNC milling or 3D prototyping, become accessible for the synthesis path. Also by using wood its intrinsic well defined porosity and the fact that large monoliths are obtained help expanding the prospect of using the composite. It was also demonstrated in this chapter that the resulting material can be applied for the environmentally important issue of waste water cleansing. Additionally to being made from renewable resources and by a cheap and easy one-pot synthesis, the material is recyclable, since the pollutants can be recovered by washing with ethanol. Most importantly this chapter covered experiments where the reaction was performed in a crude, home-built glass vessel, fuelled – with the help of a Fresnel lens – only by direct concentrated sunlight irradiation. This concept carries the thus far presented synthetic procedures from being common laboratory syntheses to a real world application. Based on cellulose, transition metals and simple equipment, this work enabled the easy one-pot synthesis of nano-ceramic and metal nanoparticle composites otherwise not readily accessible. Furthermore were structuring and patterning techniques and synthesis routes involving only renewable resources and environmentally benign procedures established here. Thereby it has laid the foundation for a multitude of applications and pointed towards several future projects reaching from fundamental research, to application focussed research and even and industry relevant engineering project was envisioned.
One of the main issues with the use of nickel titanium alloy (NiTi) implants in cardiovascular implants (stents) is that these devices must be of very high quality in order to avoid subsequent operations due to failing stents. For small stents with diameters below ca. 2 mm, however, stent characterization is not straightforward. One of the main problems is that there are virtually no methods to characterize the interior of the NiTi tubes used for fabrication of these tiny stents. The current paper reports on a robust hybrid actuator for the characterization of NiTi tubes prior to stent fabrication. The method is based on a polymer/hydrogel/magnetic nanoparticle hybrid material and allows for the determination of the inner diameter at virtually all places in the raw NiTi tubes. Knowledge of the inner structure of the raw NiTi tubes is crucial to avoid regions that are not hollow or regions that are likely to fail due to defects inside the raw tube. The actuator enables close contact of a magnetic polymer film with the inner NiTi tube surface. The magnetic signal can be detected from outside and be used for a direct mapping of the tube interior. As a result, it is possible to detect critical regions prior to expensive and slow stent fabrication processes.
BACKGROUND: There is an increased need to replace materials derived from fossil sources by renewables. Sugar-cane derived carbohydrates are very abundant in Brazil and are the cheapest sugars available in the market, with more than 400 million tons of sugarcane processed in the year 2007. The objective of this work was to study the preparation of sugar acrylates from free sugars and free acrylic acid, thus avoiding the previous preparation of protected sugar derivatives, such as glycosides, or activated acrylates, such as vinyl acrylate. RESULTS: Lipase catalyzed esterification of three mono- and two disaccharides with acrylic acid, in the presence or absence of molecular sieves was investigated. The reactions were monitored by high-performance liquid chromatography (HPLC) and the products were analyzed by matrix-assisted laser desorption ionization–time of flight (MALDI-TOF) mass spectrometry. The main products are mono- and diacrylates, while higher esters are formed as minor products. The highest conversion to sugar acrylates was observed for the D-glucose and D-fructose, followed by D-xylose and D-maltose. Molecular sieves had no pronounced effect on the conversion CONCLUSIONS: A feasible method is described to produce and to characterize sugar acrylates, including those containing more than two acrylate groups. The process for production of these higher esters could potentially be optimized further to produce molecules for cross-linking in acrylate polymerization and other applications. The direct enzymatic esterification of free carbohydrates with acrylic acid is unprecedented.
Growth of phytopathogenic fungi in the presence of partially acetylated chitooligosaccharides
(2008)
Four phytopathogenic fungi were cultivated up to six days in media containing chitooligosaccharide mixtures differing in average DP and FA. The three different mixtures were named Q3 (which contained oligosaccharides ofDP2–DP10, withDP2–DP7 asmain components), Q2 (which contained oligosaccharides of DP2–DP12, with DP2–DP10 as main components) and Q1 (which derived from Q2 and contained oligomers of DP5–DP8 with hexamer and a heptamer as the main components). The novel aspect of this work is the description of the effect of mixtures of oligosaccharides with different and known composition on fungal growth rates. The growth rate of Alternaria alternata and Rhizopus stolonifer was initially inhibited by Q3 and Q2 at higher concentrations. Q1 had a growth stimulating effect on these two fungi. Growth of Botrytis cinerea was inhibited by Q3 and Q2, while Q1 had no effect on the growth of this fungus. Growth of Penicillium expansum was only slightly inhibited by higher concentrations of sample Q3, while Q2 and Q1 had no effect. The inhibition of growth rates or their resistance toward chitooligosaccharides correlated with the absence or presence of chitinolytic enzymes in the culture media, respectively.
From the roots of the African plant Bulbine frutescens (Asphodelaceae), two unprecedented novel dimeric phenylanthraquinones, named joziknipholones A and B, possessing axial and centrochirality, were isolated, together with six known compounds. Structural elucidation of the new metabolites was achieved by spectroscopic and chiroptical methods, by reductive cleavage of the central bond between the monomeric phenylanthraquinone and -anthrone portions with sodium dithionite, and by quantum chemical CD calculations. Based on the recently revised absolute axial configuration of the parent phenylanthraquinones, knipholone and knipholone anthrone, the new dimers were attributed to possess the P-configuration (i.e., with the acetyl portions below the anthraquinone plane) at both axes in the case of joziknipholone A, whereas in joziknipholone B, the knipholone part was found to be M-configured. Joziknipholones A and B are active against the chloroquine resistant strain K1 of the malaria pathogen, Plasmodium falciparum, and show moderate activity against murine leukemic lymphoma L5178y cells.
We present an approach to the correlated dynamics of many-electron systems. We show, that the twoelectron reduced density matrix (2RDM) can provide a suitable description of the real time evolution of a system. To achieve this, the hierarchy of equations of motion must be truncated in a practical way. Also, the computational effort, given that the 2RDM is represented by products of two-electron determinants, is discussed, and numerical model calculations are presented.
The piezoelectric and pyroelectric properties of oriented films possessing dipole moments are increasingly being used in pressure, acoustic, thermal and optical devices. The performance of these devices in many applications may be enhanced by thin-film technology.The developing Langmuir-Blodgett thin-film deposition technique offers the opportunity to obtain highly oriented and uniform organic-based films in the 10–5000 nm thickness range. Special techniques must be used, however, to assemble these molecules in such a way as to result in polar multilayer films. Several possible deposition techniques are investigated, with one resulting in a polar and pyroelectric film about 50 nm thick.
The molecular packing and spatial correlations of two isomeric zwitterionic polymethacrylates and one polyacrylate analog are studied by means of X-ray analysis and conformational calculations. The analysis of the correlation functions and density distribution profiles suggest a double-layered molecular packing which is discussed for the three polymers investigated, with respect to their different chemical structures. Whereas the zwitterionic polymethacrylates studied exhibit liquid-like short-range order, the polyacrylate analog exhibits an ordered double-layered superstructure.
A variety of polymerizable lipids containing a hydrophilic spacer group between the reactive group and the main amphiphilic structure have been synthesized. They were investigated in monolayers, liposomes, and multilayers. When the spacer concept was used, efficient decoupling of the motions of the polymeric chain and the amphiphilic side groups is achieved. Thus, the often found loss of the important fluid phases by polymerization is avoided. Polymeric monolayers of the spacer lipid, prepared either by polymerization in the monolayer or by spreading of prepolymerized lipid, exhibit nearly identical surface pressure-area diagrams. Most distinctly, the successful decoupling of the motions of the polymer main chain and the membrane forming amphiphilic side groups is demonstrated by the self-organization of bulk polymerized spacer lipids to polymeric liposomes. In addition, spacer lipids are able to build polymeric Langmuir-Blodgett multilayers. The decoupling of the polymer main chain and the membrane-forming amphiphilic side groups enables the deposition of already polymeric monolayers onto supports to form defined multilayers. If, alternatively, monomeric monolayers are deposited and polymerized on the support, defects in the layers due to structural changes during the polymerization are avoided by the flexible spacer group.