Refine
Has Fulltext
- yes (35) (remove)
Year of publication
- 2017 (35) (remove)
Document Type
- Doctoral Thesis (25)
- Postprint (9)
- Habilitation Thesis (1)
Is part of the Bibliography
- yes (35)
Keywords
- FRET (3)
- Bioraffinerie (2)
- Calciumphosphat (2)
- DNA origami (2)
- Förster resonance energy transfer (2)
- Gold (2)
- Nanopartikel (2)
- biomineralization (2)
- calcium phosphate (2)
- crystal structure (2)
Institute
- Institut für Chemie (35) (remove)
Die klassische Physik/Chemie unterscheidet zwischen drei Bindungstypen: Der kovalenten Bindung, der ionischen Bindung und der metallischen Bindung. Moleküle untereinander werden hingegen durch schwache Wechselwirkungen zusammen gehalten, sie sind trotz ihrer schwachen Kräfte weniger verstanden, aber dabei nicht weniger wichtig. In zukunftsweisenden Gebieten wie der Nanotechnologie, der Supramolekularen Chemie und Biochemie sind sie von elementarer Bedeutung.
Um schwache, intermolekulare Wechselwirkungen zu beschreiben, vorauszusagen und zu verstehen, sind sie zunächst theoretisch zu erfassen. Hierzu gehören verschiedene quantenchemische Methoden, die in dieser Arbeit vorgestellt, verglichen, weiterentwickelt und schließlich auch exemplarisch auf Problemstellungen in der Chemie angewendet werden. Aufbauend auf einer Hierarchie von Methoden unterschiedlicher Genauigkeit werden sie für diese Ziele eingesetzt, ausgearbeitet und kombiniert.
Berechnet wird die Elektronenstruktur, also die Verteilung und Energie von Elektronen, die im Wesentlichen die Atome zusammen halten. Da Ungenauigkeiten von der Beschreibung der Elektronenstruktur von den verwendeten Methoden abhängen, kann man die Effekte detailliert untersuchen, sie beschreiben und darauf aufbauend weiter entwickeln, um sie anschließend an verschiedenen Modellen zu testen. Die Geschwindigkeit der Berechnungen mit modernen Computern ist eine wesentliche, zu berücksichtigende Komponente, da im Allgemeinen die Genauigkeit mit der Rechenzeit exponentiell steigt, und die damit an die Grenzen der Möglichkeiten stoßen muss.
Die genaueste der verwendeten Methoden basiert auf der Coupled-Cluster-Theorie, die sehr gute Voraussagen ermöglicht. Für diese wird eine sogenannte spektroskopische Genauigkeit mit Abweichungen von wenigen Wellenzahlen erzielt, was Vergleiche mit experimentellen Daten zeigen. Eine Möglichkeit zur Näherung von hochgenauen Methoden basiert auf der Dichtefunktionaltheorie: Hier wurde das „Boese-Martin for Kinetics“ (BMK)-Funktional entwickelt, dessen Funktionalform sich in vielen nach 2010 veröffentlichten Dichtefunktionalen wiederfindet.
Mit Hilfe der genaueren Methoden lassen sich schließlich semiempirische Kraftfelder zur Beschreibung intermolekularer Wechselwirkungen für individuelle Systeme parametrisieren, diese benötigen weit weniger Rechenzeit als die Methoden, die auf der genauen Berechnung der Elektronenstruktur von Molekülen beruhen.
Für größere Systeme lassen sich auch verschiedene Methoden kombinieren. Dabei wurden Einbettungsverfahren verfeinert und mit neuen methodischen Ansätzen vorgeschlagen. Sie verwenden sowohl die symmetrieadaptierte Störungstheorie als auch die quantenchemische Einbettung von Fragmenten in größere, quantenchemisch berechnete Systeme.
Die Entwicklungen neuer Methoden beziehen ihren Wert im Wesentlichen durch deren Anwendung:
In dieser Arbeit standen zunächst die Wasserstoffbrücken im Vordergrund. Sie zählen zu den stärkeren intermolekularen Wechselwirkungen und sind nach wie vor eine Herausforderung. Im Gegensatz dazu sind van-der-Waals Wechselwirkungen relativ einfach durch Kraftfelder zu beschreiben. Deshalb sind viele der heute verwendeten Methoden für Systeme, in denen Wasserstoffbrücken dominieren, vergleichsweise schlecht.
Eine Untersuchung molekularer Aggregate mit Auswirkungen intermolekularer Wechselwirkungen auf die Schwingungsfrequenzen von Molekülen schließt sich an. Dabei wird auch über die sogenannte starrer-Rotor-harmonischer-Oszillator-Näherung hinausgegangen.
Eine weitreichende Anwendung behandelt Adsorbate, hier die von Molekülen auf ionischen/metallischen Oberflächen. Sie können mit ähnlichen Methoden behandelt werden wie die intermolekularen Wechselwirkungen, und sind mit speziellen Einbettungsverfahren sehr genau zu beschreiben. Die Resultate dieser theoretischen Berechnungen stimulierten eine Neubewertung der bislang bekannten experimentellen Ergebnisse.
Molekulare Kristalle sind ein äußerst wichtiges Forschungsgebiet. Sie werden durch schwache Wechselwirkungen zusammengehalten, die von van-der-Waals Kräften bis zu Wasserstoffbrücken reichen. Auch hier wurden neuentwickelte Methoden eingesetzt, die eine interessante, mindestens ebenso genaue Alternative zu den derzeit gängigen Methoden darstellen.
Von daher sind die entwickelten Methoden, als auch deren Anwendung äußerst vielfältig. Die behandelten Berechnungen der Elektronenstruktur erstrecken sich von den sogenannten post-Hartree-Fock-Methoden über den Einsatz der Dichtefunktionaltheorie bis zu semiempirischen Kraftfeldern und deren Kombinationen. Die Anwendung reicht von einzelnen Molekülen in der Gasphase über die Adsorption auf Oberflächen bis zum molekularen Festkörper.
Nowadays, the need to protect the environment becomes more urgent than ever. In the field of chemistry, this translates to practices such as waste prevention, use of renewable feedstocks, and catalysis; concepts based on the principles of green chemistry. Polymers are an important product in the chemical industry and are also in the focus of these changes. In this thesis, more sustainable approaches to make two classes of polymers, polypeptoids and polyesters, are described.
Polypeptoids or poly(alkyl-N-glycines) are isomers of polypeptides and are biocompatible, as well as degradable under biologically relevant conditions. In addition to that, they can have interesting properties such as lower critical solution temperature (LCST) behavior. They are usually synthesized by the ring opening polymerization (ROP) of N-carboxy anhydrides (NCAs), which are produced with the use of toxic compounds (e.g. phosgene) and which are highly sensitive to humidity. In order to avoid the direct synthesis and isolation of the NCAs, N-phenoxycarbonyl-protected N-substituted glycines are prepared, which can yield the NCAs in situ. The conditions for the NCA synthesis and its direct polymerization are investigated and optimized for the simplest N-substituted glycine, sarcosine. The use of a tertiary amine in less than stoichiometric amounts compared to the N-phenoxycarbonyl--sarcosine seems to accelerate drastically the NCA formation and does not affect the efficiency of the polymerization. In fact, well defined polysarcosines that comply to the monomer to initiator ratio can be produced by this method. This approach was also applied to other N-substituted glycines.
Dihydroxyacetone is a sustainable diol produced from glycerol, and has already been used for the synthesis of polycarbonates. Here, it was used as a comonomer for the synthesis of polyesters. However, the polymerization of dihydroxyacetone presented difficulties, probably due to the insolubility of the macromolecular chains. To circumvent the problem, the dimethyl acetal protected dihydroxyacetone was polymerized with terephthaloyl chloride to yield a soluble polymer. When the carbonyl was recovered after deprotection, the product was insoluble in all solvents, showing that the carbonyl in the main chain hinders the dissolution of the polymers. The solubility issue can be avoided, when a 1:1 mixture of dihydroxyacetone/ ethylene glycol is used to yield a soluble copolyester.
The valorization of carbohydrates is one of the most promising fields in green chemistry, as it enables to produce bulk chemicals and fuels out of renewable and abundant resources, instead of further exploiting fossil feedstocks. The focus in this thesis is the conversion of fructose, using dehydration and hydrodeoxygenation reactions. The main goal is to find an easy continuous process, including the solubility of the sugar in a green solvent, the conversion over a solid acid as well as over a metal@tungsten carbide catalyst.
At the beginning of this thesis, solid acid catalysts are synthesized by using carbohydrate material like glucose and starch at high temperatures (up to 600 °C). Additionally a third carbon is synthesized, using an activation method based on Ca(OH)2. After carbonization and further sulfonation, using fuming sulfuric acid, the three resulting catalysts are characterized together with sulfonated carbon black and Amberlyst 15 as references. In order to test all solid acid catalysts in reaction, a 250 mm x 4.6 mm stainless steel column is used as a fixed-bed continuous reactor. The temperature (110 °C to 250 °C) and residence time (2 to 30 minutes) is varied, and a direct relationship between contact time and selectivity is determined. The reaction mechanism, as well as the product distribution is showing a dehydration step of fructose towards 5-hydroxymethylfurfural (HMF). These furan-ring molecules are considered as “sleeping giants”, due to the possibility of using them as fuel, but also for upgrading them to chemicals like terephthalic acid or p-xylene. Consecutive reactions are producing levulinic acid, as well as condensation products with ethanol and formic acid. The activated carbon is additionally showing a 2 % yield of 2,5-Dimethylfuran (DMF) production, pointing towards the extraordinary properties of this catalyst. Without a metal catalyst present, what is normally necessary for hydrogenation reactions, a transferhydrogenation (with formic acid) is observed. The active catalyst was therefore carbon itself, what activated the hydrogen on its surface. This phenomenon was just very rarely observed so far. Expensive noble metals are the material of choice, when it comes to hydrogenation reactions nowadays and cheaper alternatives are necessary.
By postulating a similar electronic structure of tungsten carbide (WC) to platinum by Lewy and Boudart, research is focusing on the replacement of Pt. The production of nano-sized tungsten carbide particles (7.5 ± 2.5 nm, 70 m2 g-1) is enabled by the so called “urea glass route” and its catalytic performances are compared to commercial material. It is shown, that the activity is strongly dependent on the size of the particles as well as the surface area. Nano-sized tungsten carbide is showing activity for hydrogenation reactions under mild conditions (maximum 150 °C, 30 bar). This material therefore opens up new possibilities for replacing the rare and expensive platinum with tungsten carbide based catalysts.
Additionally different metal nanoparticles of palladium, copper and nickel are deposited on top of WC to further promote its reactivity. The nickel nanoparticles are strongly connected to WC and showed the best activity as well as selectivity for upgrading HMF with hydrodeoxygenation. The Ni@WC is not leaching and is showing very good hydrodeoxygenation properties with DMF yields up to 90 percent. Copper@WC is not showing good activity and palladium@WC enables undesired consecutive reactions, hydrogenating the furan ring system.
In order to enable the upgrade of fructose to DMF directly in a continuous system, the current H CUBE Pro TM hydrogenation system is customized with a second reaction column. A 250 mm x 4.6 mm stainless steel reactor column is connected ahead of the hydrogen insertion, enabling the dehydration of fructose to HMF derivatives, before pumping these products into the second column for hydrogenation. The overall residence time in the two column reactor system is 14 minutes. The overall results are an almost full conversion with a yield of 38.5 % DMF and 47 % yield of EL. The main disadvantage is the formation of higher mass products, so called humins, which start depositing on top of the catalysts, blocking their active sites.
In general it can be stated, that a two column system goes along with a higher investment as well as more maintenance costs, compared to a one column catalytic approach. To develop a catalyst, which is on the one hand able to dehydrate as well as hydrodeoxygenate the reactants, is aimed for at the last part of the thesis. The activated carbon however shows already activity for hydrodeoxygenation without any metal present and offers itself therefore as an alternative to overcome the temperature instability of Amberlyst 15 (max. 120 °C) for a combined DMF production directly from fructose. The activity for the upgrade to DMF is increased from 2 % to 12 % DMF yield in one mixed continuous column.
In order to scale up the entire one column approach, an 800 mm x 28.5 mm inner diameter column was planned and manufactured. The system is scaled up and assembled, whereas this flow reactor system is able to be run with 50 mL min-1 maximum flow rate, to stand a pressure of maximum 100 bar and be heated to around 500 °C. The tubing and connections, as well as the used devices are planned according to be safe and easy in use. The scaled-up approach offers a reaction column 120 times bigger (510 ml) then the first extension of the commercial system. This further extension offers the possibility of ranging between 1 and 1000 mL min-1, making it possible to use the approach in pilot plant applications.
Development of a reliable and environmentally friendly synthesis for fluorescence carbon nanodots
(2017)
Carbon nanodots (CNDs) have generated considerable attention due to their promising properties, e.g. high water solubility, chemical inertness, resistance to photobleaching, high biocompatibility and ease of functionalization. These properties render them ideal for a wide range of functions, e.g. electrochemical applications, waste water treatment, (photo)catalysis, bio-imaging and bio-technology, as well as chemical sensing, and optoelectronic devices like LEDs. In particular, the ability to prepare CNDs from a wide range of accessible organic materials makes them a potential alternative for conventional organic dyes and semiconductor quantum dots (QDs) in various applications. However, current synthesis methods are typically expensive and depend on complex and time-consuming processes or severe synthesis conditions and toxic chemicals. One way to reduce overall preparation costs is the use of biological waste as starting material. Hence, natural carbon sources such as pomelo peal, egg white and egg yolk, orange juice, and even eggshells, to name a few; have been used for the preparation of CNDs. While the use of waste is desirable, especially to avoid competition with essential food production, most starting-materials lack the essential purity and structural homogeneity to obtain homogeneous carbon dots. Furthermore, most synthesis approaches reported to date require extensive purification steps and have resulted in carbon dots with heterogeneous photoluminescent properties and indefinite composition. For this reason, among others, the relationship between CND structure (e.g. size, edge shape, functional groups and overall composition) and photophysical properties is yet not fully understood. This is particularly true for carbon dots displaying selective luminescence (one of their most intriguing properties), i.e. their PL emission wavelength can be tuned by varying the excitation wavelength.
In this work, a new reliable, economic, and environmentally-friendly one-step synthesis is established to obtain CNDs with well-defined and reproducible photoluminescence (PL) properties via the microwave-assisted hydrothermal treatment of starch, carboxylic acids and Tris-EDTA (TE) buffer as carbon- and nitrogen source, respectively. The presented microwave-assisted hydrothermal precursor carbonization (MW-hPC) is characterized by its cost-efficiency, simplicity, short reaction times, low environmental footprint, and high yields of approx. 80% (w/w). Furthermore, only a single synthesis step is necessary to obtain homogeneous water-soluble CNDs with no need for further purification.
Depending on starting materials and reaction conditions different types of CNDs have been prepared. The as-prepared CNDs exhibit reproducible, highly homogeneous and favourable PL properties with narrow emission bands (approx. 70nm FWHM), are non-blinking, and are ready to use without need for further purification, modification or surface passivation agents. Furthermore, the CNDs are comparatively small (approx. 2.0nm to 2.4nm) with narrow size distributions; are stable over a long period of time (at least one year), either in solution or as a dried solid; and maintain their PL properties when re-dispersed in solution. Depending on CND type, the PL quantum yield (PLQY) can be adjusted from as low as 1% to as high as 90%; one of the highest reported PLQY values (for CNDs) so far.
An essential part of this work was the utilization of a microwave synthesis reactor, allowing various batch sizes and precise control over reaction temperature and -time, pressure, and heating- and cooling rate, while also being safe to operate at elevated reaction conditions (e.g. 230 ±C and 30 bar). The hereby-achieved high sample throughput allowed, for the first time, the thorough investigation of a wide range of synthesis parameters, providing valuable insight into the CND formation. The influence of carbon- and nitrogen source, precursor concentration and -combination, reaction time and -temperature, batch size, and post-synthesis purification steps were carefully investigated regarding their influence on the optical properties of as-synthesized CNDs. In addition, the change in photophysical properties resulting from the conversion of CND solution into solid and back into the solution was investigated. Remarkably, upon freeze-drying the initial brown CND-solution turns into a non-fluorescent white/slightly yellow to brown solid which recovers PL in aqueous solution. Selected CND samples were also subject to EDX, FTIR, NMR, PL lifetime (TCSPC), particle size (TEM), TGA and XRD analysis. Besides structural characterization, the pH- and excitation dependent PL characteristics (i.e. selective luminescence) were examined; giving inside into the origin of photophysical properties and excitation dependent behaviour of CNDs. The obtained results support the notion that for CNDs the nature of the surface states determines the PL properties and that excitation dependent behaviour is caused by the “Giant Red-Edge Excitation Shift” (GREES).
Nanolenses are linear chains of differently-sized metal nanoparticles, which can theoretically provide extremely high field enhancements. The complex structure renders their synthesis challenging and has hampered closer analyses so far. Here, the technique of DNA origami was used to self-assemble DNA-coated 10 nm, 20 nm, and 60 nm gold or silver nanoparticles into gold or silver nanolenses. Three different geometrical arrangements of gold nanolenses were assembled, and for each of the three, sets of single gold nanolenses were investigated in detail by atomic force microscopy, scanning electron microscopy, dark-field scattering and Raman spectroscopy. The surface-enhanced Raman scattering (SERS) capabilities of the single nanolenses were assessed by labelling the 10 nm gold nanoparticle selectively with dye molecules. The experimental data was complemented by finite-difference time-domain simulations. For those gold nanolenses which showed the strongest field enhancement, SERS signals from the two different internal gaps were compared by selectively placing probe dyes on the 20 nm or 60 nm gold particles. The highest enhancement was found for the gap between the 20 nm and 10 nm nanoparticle, which is indicative of a cascaded field enhancement. The protein streptavidin was labelled with alkyne groups and served as a biological model analyte, bound between the 20 nm and 10 nm particle of silver nanolenses. Thereby, a SERS signal from a single streptavidin could be detected. Background peaks observed in SERS measurements on single silver nanolenses could be attributed to amorphous carbon. It was shown that the amorphous carbon is generated in situ.
Ziel der vorliegenden Arbeit war die Synthese und Charakterisierung von anisotropen Goldnanopartikeln in einer geeigneten Polyelektrolyt-modifizierten Templatphase. Der Mittelpunkt bildet dabei die Auswahl einer geeigneten Templatphase, zur Synthese von einheitlichen und reproduzierbaren anisotropen Goldnanopartikeln mit den daraus resultierenden besonderen Eigenschaften. Bei der Synthese der anisotropen Goldnanopartikeln lag der Fokus in der Verwendung von Vesikeln als Templatphase, wobei hier der Einfluss unterschiedlicher strukturbildender Polymere (stark alternierende Maleamid-Copolymere PalH, PalPh, PalPhCarb und PalPhBisCarb mit verschiedener Konformation) und Tenside (SDS, AOT – anionische Tenside) bei verschiedenen Synthese- und Abtrennungsbedingungen untersucht werden sollte.
Im ersten Teil der Arbeit konnte gezeigt werden, dass PalPhBisCarb bei einem pH-Wert von 9 die Bedingungen eines Röhrenbildners für eine morphologische Transformation von einer vesikulären Phase in eine röhrenförmige Netzwerkstruktur erfüllt und somit als Templatphase zur formgesteuerten Bildung von Nanopartikeln genutzt werden kann.
Im zweiten Teil der Arbeit wurde dargelegt, dass die Templatphase PalPhBisCarb (pH-Wert von 9, Konzentration von 0,01 wt.%) mit AOT als Tensid und PL90G als Phospholipid (im Verhältnis 1:1) die effektivste Wahl einer Templatphase für die Bildung von anisotropen Strukturen in einem einstufigen Prozess darstellt. Bei einer konstanten Synthesetemperatur von 45 °C wurden die besten Ergebnisse bei einer Goldchloridkonzentration von 2 mM, einem Gold-Templat-Verhältnis von 3:1 und einer Synthesezeit von 30 Minuten erzielt. Ausbeute an anisotropen Strukturen lag bei 52 % (Anteil an dreieckigen Nanoplättchen von 19 %). Durch Erhöhung der Synthesetemperatur konnte die Ausbeute auf 56 % (29 %) erhöht werden.
Im dritten Teil konnte durch zeitabhängige Untersuchungen gezeigt werden, dass bei Vorhandensein von PalPhBisCarb die Bildung der energetisch nicht bevorzugten Plättchen-Strukturen bei Raumtemperatur initiiert wird und bei 45 °C ein Optimum annimmt.
Kintetische Untersuchungen haben gezeigt, dass die Bildung dreieckiger Nanoplättchen bei schrittweiser Zugabe der Goldchlorid-Präkursorlösung zur PalPhBisCarb enthaltenden Templatphase durch die Dosierrate der vesikulären Templatphase gesteuert werden kann. In umgekehrter Weise findet bei Zugabe der Templatphase zur Goldchlorid-Präkursorlösung bei 45 °C ein ähnlicher, kinetisch gesteuerter Prozess der Bildung von Nanodreiecken statt mit einer maximalen Ausbeute dreieckigen Nanoplättchen von 29 %.
Im letzten Kapitel erfolgten erste Versuche zur Abtrennung dreieckiger Nanoplättchen von den übrigen Geometrien der gemischten Nanopartikellösung mittels tensidinduzierter Verarmungsfällung. Bei Verwendung von AOT mit einer Konzentration von 0,015 M wurde eine Ausbeute an Nanoplättchen von 99 %, wovon 72 % dreieckiger Geometrien hatten, erreicht.
Die Elektrosprayionisation (ESI) ist eine der weitverbreitetsten Ionisationstechniken für flüssige Pro-ben in der Massen- und Ionenmobilitäts(IM)-Spektrometrie. Aufgrund ihrer schonenden Ionisierung wird ESI vorwiegend für empfindliche, komplexe Moleküle in der Biologie und Medizin eingesetzt. Überdies ist sie allerdings für ein sehr breites Spektrum an Substanzklassen anwendbar. Die IM-Spektrometrie wurde ursprünglich zur Detektion gasförmiger Proben entwickelt, die hauptsächlich durch radioaktive Quellen ionisiert werden. Sie ist die einzige analytische Methode, bei der Isomere in Echtzeit getrennt und über ihre charakteristische IM direkt identifiziert werden können. ESI wurde in den 90ger Jahren durch die Hill Gruppe in die IM-Spektrometrie eingeführt. Die Kombination wird bisher jedoch nur von wenigen Gruppen verwendet und hat deshalb noch ein hohes Entwick-lungspotential. Ein vielversprechendes Anwendungsfeld ist der Einsatz in der Hochleistungs-flüssigkeitschromatographie (HPLC) zur mehrdimensionalen Trennung. Heutzutage ist die HPLC die Standardmethode zur Trennung komplexer Proben in der Routineanalytik. HPLC-Trennungsgänge sind jedoch häufig langwierig und der Einsatz verschiedener Laufmittel, hoher Flussraten, von Puffern, sowie Laufmittelgradienten stellt hohe Anforderungen an die Detektoren. Die ESI-IM-Spektrometrie wurde in einigen Studien bereits als HPLC-Detektor eingesetzt, war dort bisher jedoch auf Flussratensplitting oder geringe Flussraten des Laufmittels beschränkt.
In dieser kumulativen Doktorarbeit konnte daher erstmals ein ESI IM-Spektrometer als HPLC-Detektor für den Flussratenbereich von 200-1500 μl/min entwickelt werden. Anhand von fünf Publi-kationen wurden (1) über eine umfassende Charakterisierung die Eignung des Spektrometers als HPLC-Detektor festgestellt, (2) ausgewählte komplexe Trenngänge präsentiert und (3) die Anwen-dung zum Reaktionsmonitoring und (4, 5) mögliche Weiterentwicklungen gezeigt.
Erfolgreich konnten mit dem selbst-entwickelten ESI IM-Spektrometer typische HPLC-Bedingungen wie Wassergehalte im Laufmittel von bis zu 90%, Pufferkonzentrationen von bis zu 10 mM, sowie Nachweisgrenzen von bis zu 50 nM erreicht werden. Weiterhin wurde anhand der komplexen Trennungsgänge (24 Pestizide/18 Aminosäuren) gezeigt, dass die HPLC und die IM-Spektrometrie eine hohe Orthogonalität besitzen. Eine effektive Peakkapazität von 240 wurde so realisiert. Auf der HPLC-Säule koeluierende Substanzen konnten über die Driftzeit getrennt und über ihre IM identifi-ziert werden, sodass die Gesamttrennzeiten erheblich minimiert werden konnten. Die Anwend-barkeit des ESI IM-Spektrometers zur Überwachung chemischer Synthesen wurde anhand einer dreistufigen Reaktion demonstriert. Es konnten die wichtigsten Edukte, Zwischenprodukte und Produkte aller Stufen identifiziert werden. Eine quantitative Auswertung war sowohl über eine kurze HPLC-Vortrennung als auch durch die Entwicklung eines eigenen Kalibrierverfahrens, welches die Ladungskonkurrenz bei ESI berücksichtigt, ohne HPLC möglich. Im zweiten Teil der Arbeit werden zwei Weiterentwicklungen des Spektrometers präsentiert. Eine Möglichkeit ist die Reduzierung des Drucks in den intermediären Bereich (300 - 1000 mbar) mit dem Ziel der Verringerung der benötigten Spannungen. Mithilfe von Streulichtbildern und Strom-Spannungs-Kurven wurden für geringe Drücke eine verminderte Freisetzung der Analyt-Ionen aus den Tropfen festgestellt. Die Verluste konnten jedoch über höhere elektrische Feldstärken ausgeglichen werden, sodass gleiche Nachweisgrenzen bei 500 mbar und bei 1 bar erreicht wurden. Die zweite Weiterentwicklung ist ein neuartiges Ionentors mit Pulsschaltung, welches eine Verdopplung der Auflösung auf bis zu R > 100 bei gleicher Sensitivität ermöglichte. Eine denkbare Anwendung im Bereich der Peptidanalytik wurde mit beachtlichen Auflösungen der Peptide von R = 90 gezeigt.
The motivation of this work was to investigate the self-assembly of a block copolymer species that attended little attraction before, double hydrophilic block copolymers (DHBCs). DHBCs consist of two linear hydrophilic polymer blocks. The self-assembly of DHBCs towards suprastructures such as particles and vesicles is determined via a strong difference in hydrophilicity between the corresponding blocks leading to a microphase separation due to immiscibility. The benefits of DHBCs and the corresponding particles and vesicles, such as biocompatibility, high permeability towards water and hydrophilic compounds as well as the large amount of possible functionalizations that can be addressed to the block copolymers make the application of DHBC based structures a viable choice in biomedicine. In order to assess a route towards self-assembled structures from DHBCs that display the potential to act as cargos for future applications, several block copolymers containing two hydrophilic polymer blocks were synthesized. Poly(ethylene oxide)-b-poly(N-vinylpyrrolidone) (PEO-b-PVP) and Poly(ethylene oxide)-b-poly(N-vinylpyrrolidone-co-N-vinylimidazole) (PEO-b-P(VP-co-VIm) block copolymers were synthesized via reversible deactivation radical polymerization (RDRP) techniques starting from a PEO-macro chain transfer agent. The block copolymers displayed a concentration dependent self-assembly behavior in water which was determined via dynamic light scattering (DLS). It was possible to observe spherical particles via laser scanning confocal microscopy (LSCM) and cryogenic scanning electron microscopy (cryo SEM) at highly concentrated solutions of PEO-b-PVP. Furthermore, a crosslinking strategy with (PEO-b-P(VP-co-VIm) was developed applying a diiodo derived crosslinker diethylene glycol bis(2-iodoethyl) ether to form quaternary amines at the VIm units. The formed crosslinked structures proved stability upon dilution and transfer into organic solvents. Moreover, self-assembly and crosslinking in DMF proved to be more advantageous and the crosslinked structures could be successfully transferred to aqueous solution. The afforded spherical submicron particles could be visualized via LSCM, cryo SEM and Cryo TEM.
Double hydrophilic pullulan-b-poly(acrylamide) block copolymers were synthesized via copper catalyzed alkyne azide cycloaddition (CuAAC) starting from suitable pullulan alkyne and azide functionalized poly(N,N-dimethylacrylamide) (PDMA) and poly(N-ethylacrylamide) (PEA) homopolymers. The conjugation reaction was confirmed via SEC and 1H-NMR measurements. The self-assembly of the block copolymers was monitored with DLS and static light scattering (SLS) measurements indicating the presence of hollow spherical structures. Cryo SEM measurements could confirm the presence of vesicular structures for Pull-b-PEA block copolymers. Solutions of Pull-b-PDMA displayed particles in cryo SEM. Moreover, an end group functionalization of Pull-b-PDMA with Rhodamine B allowed assessing the structure via LSCM and hollow spherical structures were observed indicating the presence of vesicles, too.
An exemplified pathway towards a DHBC based drug delivery vehicle was demonstrated with the block copolymer Pull-b-PVP. The block copolymer was synthesized via RAFT/MADIX techniques starting from a pullulan chain transfer agent. Pull-b-PVP displayed a concentration dependent self-assembly in water with an efficiency superior to the PEO-b-PVP system, which could be observed via DLS. Cryo SEM and LSCM microscopy displayed the presence of spherical structures. In order to apply a reversible crosslinking strategy on the synthesized block copolymer, the pullulan block was selectively oxidized to dialdehydes with NaIO4. The oxidation of the block copolymer was confirmed via SEC and 1H-NMR measurements. The self-assembled and oxidized structures were subsequently crosslinked with cystamine dihiydrochloride, a pH and redox responsive crosslinker resulting in crosslinked vesicles which were observed via cryo SEM. The vesicular structures of crosslinked Pull-b-PVP could be disassembled by acid treatment or the application of the redox agent tris(2-carboxyethyl)-phosphin-hydrochloride. The successful disassembly was monitored with DLS measurements.
To conclude, self-assembled structures from DHBCs such as particles and vesicles display a strong potential to generate an impact on biomedicine and nanotechnologies. The variety of DHBC compositions and functionalities are very promising features for future applications.
In Zeiten eines sich schnell ändernden und vielseitigen Energiemarktes müssen Kohlenstoffmaterialien für verschiedene Anforderungen einsetzbar sein. Dies erfordert flexibel synthetisierbare Kohlenstoffmaterialien bevorzugt aus günstigen und nachhaltigen Kohlenstoffquellen. Es ist allerdings nicht leicht Vorläuferverbindungen auszumachen, welche sich einerseits für verschiedene Herstellungsverfahren eignen und deren Kohlenstoffprodukte andererseits in spezifischen Eigenschaften, wie der Struktur, des Stickstoffanteils, der Oberfläche und der Porengrößen, eingestellt werden können. In diesem Zusammenhang können natürliche Polyphenole, etwa überschüssige Tannine aus der Weinproduktion, eine neue Welt zu hoch funktionalen und vielseitig einstellbaren Kohlenstoffmaterialien mit hohen Ausbeuten öffnen.
Das Hauptziel dieser vorliegenden Thesis war es neue funktionale, einstellbare und skalierbare nanostrukturierte Kohlenstoffmaterialien aus Tanninen (insbesondere Tanninsäure) für unterschiedliche elektrochemische Zwecke zu synthetisieren und zu charakterisieren. Ermöglicht wurde dies durch unterschiedliche synthetische Herangehensweisen, wie etwa der polymeren Strukturdirektion, dem ionothermalen Templatieren und der weichen Templatierung. An Stelle des weitläufig gebräuchlichen, aber kanzerogenen Vernetzungsagens Formaldehyd wurden bei den vorgestellten Synthesen Harnstoff und Thioharnstoff gewählt, um zugleich die synthetisierten Kohlenmaterialien variabel dotieren zu können.
Daher wurden im ersten Teil der Arbeit die Wechselwirkungen, Reaktionen und thermischen Verhaltensweisen von Tanninsäure und Mixturen von Tanninsäure und Harnstoff bzw. Thioharnstoff untersucht, um daraus wichtige Erkenntnisse für die verschiedenen Kohlenstoffsynthesen zu gewinnen.
Durch die Verwendung eines polymeren Strukturierungsagenz Pluronic P123 konnten in einer ersten Kohlenstoffsynthese nachhaltige und dotierbare Kohlenstoffpartikel mit Durchmessern im Nanometerbereich aus Tanninsäure und Harnstoff hergestellt werden. Es konnte dabei gezeigt werden, dass durch die Modifikation der verschiedenen Syntheseparameter die Kohlenstoffnanopartikel gemäß ihres gemittelten Partikeldurchmessers, ihrer BET-Oberfläche, ihrer Komposition, ihrer Leitfähigkeit und ihrer chemischen Stabilität einstellbar sind. Dies eröffnete die Möglichkeit diese Kohlenstoffpartikel als alternatives und nachhaltiges Rußmaterial einzusetzen.
Weiterhin war es durch die ionothermale Templatierung möglich poröse, dotierte und kontrollierbare Kohlenstoffpartikel mit hohen spezifischen Oberflächen aus den gewählten Präkursorverbindungen zu synthetisieren, die sich für den Einsatz in Superkondensatoren eignen.
Auf diesen Erkenntnissen aufbauend konnten mittels der Rotationsbeschichtung poröse binderfreie und strukturierte Kohlenstofffilme synthetisiert werden, die eine spinodale Struktur aufwiesen. Anhand der Modifikation der Stammlösungskonzentration, der Rotationsgeschwindigkeit und der verwendeten Substrate konnten die Filmdicke (100-1000 nm), die Morphologie und Gesamtoberfläche gezielt beeinflusst werden. Die erweiterte elektrochemische Analyse zeigte außerdem ein sehr gut zugängliches Porensystem der porösen Kohlenstofffilme.
Allumfassend konnten demnach verschiedene Synthesewege für Kohlenstoffmaterialien aus Tanninen aufgezeigt werden, die verschiedenartig strukturiert und kontrolliert werden können und sich für diverse Anwendungsgebiete eignen.
Functional nanoporous carbon-based materials derived from oxocarbon-metal coordination complexes
(2017)
Nanoporous carbon based materials are of particular interest for both science and industry due to their exceptional properties such as a large surface area, high pore volume, high electroconductivity as well as high chemical and thermal stability. Benefiting from these advantageous properties, nanoporous carbons proved to be useful in various energy and environment related applications including energy storage and conversion, catalysis, gas sorption and separation technologies. The synthesis of nanoporous carbons classically involves thermal carbonization of the carbon precursors (e.g. phenolic resins, polyacrylonitrile, poly(vinyl alcohol) etc.) followed by an activation step and/or it makes use of classical hard or soft templates to obtain well-defined porous structures. However, these synthesis strategies are complicated and costly; and make use of hazardous chemicals, hindering their application for large-scale production. Furthermore, control over the carbon materials properties is challenging owing to the relatively unpredictable processes at the high carbonization temperatures.
In the present thesis, nanoporous carbon based materials are prepared by the direct heat treatment of crystalline precursor materials with pre-defined properties. This synthesis strategy does not require any additional carbon sources or classical hard- or soft templates. The highly stable and porous crystalline precursors are based on coordination compounds of the squarate and croconate ions with various divalent metal ions including Zn2+, Cu2+, Ni2+, and Co2+, respectively. Here, the structural properties of the crystals can be controlled by the choice of appropriate synthesis conditions such as the crystal aging temperature, the ligand/metal molar ratio, the metal ion, and the organic ligand system. In this context, the coordination of the squarate ions to Zn2+ yields porous 3D cube crystalline particles. The morphology of the cubes can be tuned from densely packed cubes with a smooth surface to cubes with intriguing micrometer-sized openings and voids which evolve on the centers of the low index faces as the crystal aging temperature is raised. By varying the molar ratio, the particle shape can be changed from truncated cubes to perfect cubes with right-angled edges.
These crystalline precursors can be easily transformed into the respective carbon based materials by heat treatment at elevated temperatures in a nitrogen atmosphere followed by a facile washing step. The resulting carbons are obtained in good yields and possess a hierarchical pore structure with well-organized and interconnected micro-, meso- and macropores. Moreover, high surface areas and large pore volumes of up to 1957 m2 g-1 and 2.31 cm3 g-1 are achieved, respectively, whereby the macroscopic structure of the precursors is preserved throughout the whole synthesis procedure.
Owing to these advantageous properties, the resulting carbon based materials represent promising supercapacitor electrode materials for energy storage applications. This is exemplarily demonstrated by employing the 3D hierarchical porous carbon cubes derived from squarate-zinc coordination compounds as electrode material showing a specific capacitance of 133 F g-1 in H2SO4 at a scan rate of 5 mV s-1 and retaining 67% of this specific capacitance when the scan rate is increased to 200 mV s-1.
In a further application, the porous carbon cubes derived from squarate-zinc coordination compounds are used as high surface area support material and decorated with nickel nanoparticles via an incipient wetness impregnation. The resulting composite material combines a high surface area, a hierarchical pore structure with high functionality and well-accessible pores. Moreover, owing to their regular micro-cube shape, they allow for a good packing of a fixed-bed flow reactor along with high column efficiency and a minimized pressure drop throughout the packed reactor. Therefore, the composite is employed as heterogeneous catalyst in the selective hydrogenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran showing good catalytic performance and overcoming the conventional problem of column blocking.
Thinking about the rational design of 3D carbon geometries, the functions and properties of the resulting carbon-based materials can be further expanded by the rational introduction of heteroatoms (e.g. N, B, S, P, etc.) into the carbon structures in order to alter properties such as wettability, surface polarity as well as the electrochemical landscape. In this context, the use of crystalline materials based on oxocarbon-metal ion complexes can open a platform of highly functional materials for all processes that involve surface processes.