Refine
Has Fulltext
- yes (22) (remove)
Year of publication
- 2021 (22) (remove)
Document Type
- Doctoral Thesis (22) (remove)
Is part of the Bibliography
- yes (22) (remove)
Keywords
- Alpen (2)
- Alps (2)
- Argentina (2)
- Argentinien (2)
- Rheologie (2)
- Abbaufrontkartierung (1)
- Abbildende Spektroskopie (1)
- African climate (1)
- Afrikanisches Klima (1)
- AlpArray (1)
Institute
- Institut für Geowissenschaften (22) (remove)
In my doctoral thesis, I examine continuous gravity measurements for monitoring of the geothermal site at Þeistareykir in North Iceland. With the help of high-precision superconducting gravity meters (iGravs), I investigate underground mass changes that are caused by operation of the geothermal power plant (i.e. by extraction of hot water and reinjection of cold water). The overall goal of this research project is to make a statement about the sustainable use of the geothermal reservoir, from which also the Icelandic energy supplier and power plant operator Landsvirkjun should benefit.
As a first step, for investigating the performance and measurement stability of the gravity meters, in summer 2017, I performed comparative measurements at the gravimetric observatory J9 in Strasbourg. From the three-month gravity time series, I examined calibration, noise and drift behaviour of the iGravs in comparison to stable long-term time series of the observatory superconducting gravity meters. After preparatory work in Iceland (setup of gravity stations, additional measuring equipment and infrastructure, discussions with Landsvirkjun and meetings with the Icelandic partner institute ISOR), gravity monitoring at Þeistareykir was started in December 2017. With the help of the iGrav records of the initial 18 months after start of measurements, I carried out the same investigations (on calibration, noise and drift behaviour) as in J9 to understand how the transport of the superconducting gravity meters to Iceland may influence instrumental parameters.
In the further course of this work, I focus on modelling and reduction of local gravity contributions at Þeistareykir. These comprise additional mass changes due to rain, snowfall and vertical surface displacements that superimpose onto the geothermal signal of the gravity measurements. For this purpose, I used data sets from additional monitoring sensors that are installed at each gravity station and adapted scripts for hydro-gravitational modelling. The third part of my thesis targets geothermal signals in the gravity measurements.
Together with my PhD colleague Nolwenn Portier from France, I carried out additional gravity measurements with a Scintrex CG5 gravity meter at 26 measuring points within the geothermal field in the summers of 2017, 2018 and 2019. These annual time-lapse gravity measurements are intended to increase the spatial coverage of gravity data from the three continuous monitoring stations to the entire geothermal field. The combination of CG5 and iGrav observations, as well as annual reference measurements with an FG5 absolute gravity meter represent the hybrid gravimetric monitoring method for Þeistareykir. Comparison of the gravimetric data to local borehole measurements (of groundwater levels, geothermal extraction and injection rates) is used to relate the observed gravity changes to the actually extracted (and reinjected) geothermal fluids. An approach to explain the observed gravity signals by means of forward modelling of the geothermal production rate is presented at the end of the third (hybrid gravimetric) study. Further modelling with the help of the processed gravity data is planned by Landsvirkjun. In addition, the experience from time-lapse and continuous gravity monitoring will be used for future gravity measurements at the Krafla geothermal field 22 km south-east of Þeistareykir.
Major challenges during geothermal exploration and exploitation include the structural-geological characterization of the geothermal system and the application of sustainable monitoring concepts to explain changes in a geothermal reservoir during production and/or reinjection of fluids. In the absence of sufficiently permeable reservoir rocks, faults and fracture networks are preferred drilling targets because they can facilitate the migration of hot and/or cold fluids. In volcanic-geothermal systems considerable amounts of gas emissions can be released at the earth surface, often related to these fluid-releasing structures.
In this thesis, I developed and evaluated different methodological approaches and measurement concepts to determine the spatial and temporal variation of several soil gas parameters to understand the structural control on fluid flow. In order to validate their potential as innovative geothermal exploration and monitoring tools, these methodological approaches were applied to three different volcanic-geothermal systems. At each site an individual survey design was developed regarding the site-specific questions.
The first study presents results of the combined measurement of CO2 flux, ground temperatures, and the analysis of isotope ratios (δ13CCO2, 3He/4He) across the main production area of the Los Humeros geothermal field, to identify locations with a connection to its supercritical (T > 374◦C and P > 221 bar) geothermal reservoir. The results of the systematic and large-scale (25 x 200 m) CO2 flux scouting survey proved to be a fast and flexible way to identify areas of anomalous degassing. Subsequent sampling with high resolution surveys revealed the actual extent and heterogenous pattern of anomalous degassing areas. They have been related to the internal fault hydraulic architecture and allowed to assess favourable structural settings for fluid flow such as fault intersections. Finally, areas of unknown structurally controlled permeability with a connection to the superhot geothermal reservoir have been determined, which represent promising targets for future geothermal exploration and development.
In the second study, I introduce a novel monitoring approach by examining the variation of CO2 flux to monitor changes in the reservoir induced by fluid reinjection. For that reason, an automated, multi-chamber CO2 flux system was deployed across the damage zone of a major normal fault crossing the Los Humeros geothermal field. Based on the results of the CO2 flux scouting survey, a suitable site was selected that had a connection to the geothermal reservoir, as identified by hydrothermal CO2 degassing and hot ground temperatures (> 50 °C). The results revealed a response of gas emissions to changes in reinjection rates within 24 h, proving an active hydraulic communication between the geothermal reservoir and the earth surface. This is a promising monitoring strategy that provides nearly real-time and in-situ data about changes in the reservoir and allows to timely react to unwanted changes (e.g., pressure decline, seismicity).
The third study presents results from the Aluto geothermal field in Ethiopia where an area-wide and multi-parameter analysis, consisting of measurements of CO2 flux, 222Rn, and 220Rn activity concentrations and ground temperatures was conducted to detect hidden permeable structures. 222Rn and 220Rn activity concentrations are evaluated as a complementary soil gas parameter to CO2 flux, to investigate their potential to understand tectono-volcanic degassing. The combined measurement of all parameters enabled to develop soil gas fingerprints, a novel visualization approach. Depending on the magnitude of gas emissions and their migration velocities the study area was divided in volcanic (heat), tectonic (structures), and volcano-tectonic dominated areas. Based on these concepts, volcano-tectonic dominated areas, where hot hydrothermal fluids migrate along permeable faults, present the most promising targets for future geothermal exploration and development in this geothermal field. Two of these areas have been identified in the south and south-east which have not yet been targeted for geothermal exploitation. Furthermore, two unknown areas of structural related permeability could be identified by 222Rn and 220Rn activity concentrations.
Eventually, the fourth study presents a novel measurement approach to detect structural controlled CO2 degassing, in Ngapouri geothermal area, New Zealand. For the first time, the tunable diode laser (TDL) method was applied in a low-degassing geothermal area, to evaluate its potential as a geothermal exploration method. Although the sampling approach is based on profile measurements, which leads to low spatial resolution, the results showed a link between known/inferred faults and increased CO2 concentrations. Thus, the TDL method proved to be a successful in the determination of structural related permeability, also in areas where no obvious geothermal activity is present. Once an area of anomalous CO2 concentrations has been identified, it can be easily complemented by CO2 flux grid measurements to determine the extent and orientation of the degassing segment.
With the results of this work, I was able to demonstrate the applicability of systematic and area-wide soil gas measurements for geothermal exploration and monitoring purposes. In particular, the combination of different soil gases using different measurement networks enables the identification and characterization of fluid-bearing structures and has not yet been used and/or tested as standard practice. The different studies present efficient and cost-effective workflows and demonstrate a hands-on approach to a successful and sustainable exploration and monitoring of geothermal resources. This minimizes the resource risk during geothermal project development. Finally, to advance the understanding of the complex structure and dynamics of geothermal systems, a combination of comprehensive and cutting-edge geological, geochemical, and geophysical exploration methods is essential.
Magmatic continental rifts often constitute the earliest stage of nascent plate boundaries. These extensional tectonic provinces are characterized by ubiquitous normal faulting and volcanic activity; the spatial pattern, the geometry, and the age of these normal faults can help to unravel the spatiotemporal relationships between extensional deformation, magmatism, and long-wavelength crustal deformation of continental rift provinces. This study focuses on the active faulting in the Kenya Rift of the Cenozoic East African Rift System (EARS) with a focus on the mid-Pleistocene to the present-day.
To examine the early stages of continental break-up in the EARS, this thesis presents a time-averaged minimum extension rate for the inner graben of the Northern Kenya Rift (NKR) for the last 0.5 m.y. Using the TanDEM-X digital elevation model, fault-scarp geometries and associated throws are determined across the volcano-tectonic axis of the inner graben of the NKR. By integrating existing geochronology of faulted units with new ⁴⁰Ar/³⁹Ar radioisotopic dates, time-averaged extension rates are calculated. This study reveals that in the inner graben of the NKR, the long-term extension rate based on mid-Pleistocene to recent brittle deformation has minimum values of 1.0 to 1.6 mm yr⁻¹, locally with values up to 2.0 mm yr⁻¹. In light of virtually inactive border faults of the NKR, we show that extension is focused in the region of the active volcano-tectonic axis in the inner graben, thus highlighting the maturing of continental rifting in the NKR.
The phenomenon of focused extension is further investigated with a structural analysis of the youngest volcanic manifestations of the Kenya Rift, their relationship with extensional structures, and their overprint by Holocene faulting. In this context I analyzed the fault characteristics at the ~36 ka old Menengai Caldera and adjacent areas in the Central Kenya Rift using detailed field mapping and a structure-from-motion-based DEM generated from UAV data. In general, the Holocene intra-rift normal faults are dip-slip faults which strike NNE and thus reflect the present-day tectonic stress field; however, inside Menengai caldera persistent magmatic activity and magmatic resurgence overprints these young structures significantly. The caldera is located at the center of an actively extending rift segment and this and the other volcanic edifices of the Kenya Rift may constitute nucleation points of faulting an magmatic extensional processes that ultimately lead into a future stage of magma-assisted rifting.
When viewed at the scale of the entire Kenya Rift the protracted normal faulting in this region compartmentalizes the larger rift depressions, and influences the sedimentology and the hydrology of the intra-rift basins at a scale of less than 100 km. In the present day, most of the fault-bounded sub-basins of the Kenya Rift are hydrologically isolated due to this combination of faulting and magmatic activity that has generated efficient hydrological barriers that maintain these basins as semi-independent geomorphic entities. This isolation, however, was overcome during wetter climatic conditions during the past when the basins were transiently connected. I therefore also investigated the hydrological connectivity of the rift basins during the African Humid Period of the early Holocene, when climate was wetter. With the help of DEM analysis, lake-highstand indicators, radiocarbon dating, and a review of the fossil record, two lake-river-cascades could be identified: one directed southward, and one directed northward. Both cascades connected presently isolated rift basins during the early Holocene via spillovers of lakes and incised river gorges. This hydrological connection fostered the dispersal of aquatic faunas along the rift, and in addition, the water divide between the two river systems represented the only terrestrial dispersal corridor across the Kenya Rift. The reconstruction explains isolated distributions of Nilotic fish species in Kenya Rift lakes and of Guineo-Congolian mammal species in forests east of the Kenya Rift. On longer timescales, repeated episodes of connectivity and isolation must have occurred. To address this problem I participated in research to analyze a sediment drill core from the Koora basin of the Southern Kenya Rift, which provides a paleo-environmental record of the last 1 Ma. Based on this record it can be concluded that at ~400 ka relatively stable environmental conditions were disrupted by tectonic, hydrological, and ecological changes, resulting in increasingly large and frequent fluctuations in water availability, grassland communities, and woody plant cover. The major environmental shifts reflected in the drill core data coincide with phases where volcano-tectonic activity affected the basin. This thesis therefore shows how protracted extensional tectonic processes and the resulting geomorphologic conditions can affect the hydrology, the paleo-environment and the biodiversity of extensional zones in Kenya and elsewhere.
En el presente trabajo se realizó una investigación multidisciplinaria combinando métodos de geomorfología tectónica con estudios geofisicos y estructurales, focalizados principalmente en la caracterización neotectónica de ambos faldeos de la sierra de La Candelaria y del extremo sur de la cuenca de Metán. La zona de estudio se encuentra ubicada en la región limítrofe entre las provincias de Salta y Tucumán y pertenece a la provincia geológica del Sistema Santa Bárbara.
El principal objetivo consistió en contextualizar las evidencias de actividad tectónica cuaternaria de la región mediante la propuesta de un modelo estructural novedoso, con el propósito de incrementar la información disponible sobre estructuras neotectónicas y su potencial sismogénico. Con este fin, se aplicaron e integraron diversas técnicas tales como la interpretación de líneas sísmicas de reflexión, construcción de secciones estructurales balanceadas, y métodos geofísicos someros, para constatar el comportamiento en profundidad tanto de las estructuras geológicas identificadas en superficie como de las posibles fallas ciegas corticales involucradas.
En primer lugar, se realizó un relevamiento regional del área de estudio empleando imágenes satelitales multiespectrales LANDSAT y SENTINEL 2, que permitieron reconocer diferentes niveles de abanicos aluviales y terrazas fluviales cuaternarios. Mediante la determinación de diferentes indicadores morfométricos en modelos de elevación digital (MED), junto con observaciones de campo, fue posible identificar evidencias de deformación sobre dichos niveles cuaternarios que han sido relacionadas genéticamente con cuatro fallas neotectónicas. Tres de ellas (fallas Arias, El Quemado y Copo Quile) fueron seleccionadas para efectuar estudios de mayor detalle por medio de la aplicación de métodos de geofísica somera (tomografía eléctrica resistiva (ERT) y tomografía sísmica de refracción Sísmica (SRT)), que permitieron corroborar su existencia en profundidad, realizar inferencias geométricas y cinemáticas, y estimar la magnitud de la deformación reciente. Las fallas Arias y El Quemado fueron interpretadas como fallas inversas relacionadas con deslizamiento flexural interstratal, mientras que la falla Copo Quile se interpretó como una falla inversa ciega de bajo ángulo.También se realizó una interpretación conjunta de líneas sísmicas de reflexión y pozos exploratorios pertenecientes a áreas hidrocarburíferas de las cuencas de Choromoro y Metán con el fin de contextualizar las principales estructuras reconocidas en el marco estratigráfico y tectónico regional. Toda la información fue integrada en una sección estructural balanceada mediante técnicas de modelado cinemático. Dicho modelo permite inferir que la deformación cuaternaria reconocida está relacionada al desplazamiento del basamento a lo largo de un corrimiento ciego, responsable del levantamiento de la sierra de La Candelaria y el cerr Cantero. Asimismo, el modelo cinemático permite interpretar la ubicación aproximada de los principales niveles de despegue que controlan el estilo de deformación. El nivel de despegue más somero, que controla la deformación de la cobertura sedimentaria se encuentra a 4 km de profundidad, a 21 km se estima la presencia de otra zona de cizalla subhorizontal dentro del basamento.
Finalmente, a partir de la integración de todos los resultados obtenidos, se evaluó el potencial sismogénico de las fallas en la zona de estudio. Las fallas de primer orden que controlan la deformación en la zona son las responsables de los grandes terremotos. Mientras, las fallas Cuaternarias flexodeslizantes e inversas afectan solamente a la cobertura sedimentaria y serían estructuras de segundo orden que acomodan la deformación y fueron activadas durante el cuaternario con movimientos asísmicos y/o sísmicos de muy baja magnitud.
Estos resultados permiten inferir que el corrimiento La Candelaria constituye una fuente sismogénica potencial de importancia para la región, donde se ubican numerosas poblaciones y obras civiles de envergadura. Por otra parte, la sección estructural balanceada implica la presencia de otras fallas ciegas de distinto orden de magnitud que podrían ser posibles fuentes sismogénicas profundas adicionales, marcando la necesidad de continuar con el desarrollo de este tipo de estudios en esta región tectónicamente activa.
El flanco oriental de los Andes Centrales en el noroeste argentino es una zona caracterizada por serranías limitadas por fallas inversas que conforman un orógeno de piel gruesa activo con un patrón espacio-temporal no sistemático de deformación contraccional. Este patrón queda representado tanto por la dispersión de la actividad sísmica cortical como de la localización de las estructuras cuaternarias a través de la Cordillera Oriental y el Sistema de Santa Bárbara, configurando un frente orogénico difuso de más de 200 km de extensión. El estudio de la actividad neotectónica en esta región ha tomado más relevancia en los últimos años, mediante la aplicación de herramientas variadas, incluyendo técnicas de geomorfología tectónica, herramientas de teledetección, geodesia y estudios de campo convencionales. Los depósitos lacustres han demostrado ser, en numerosos ejemplos, excelentes marcadores de la actividad tectónica, dadas la horizontalidad original de sus capas y la susceptibilidad a los cambios del entorno. Es por ello que en este trabajo se analizaron los depósitos lacustres que afloran en el sector central de los valles Calchaquíes (región de Cafayate), para comprender cómo se acomoda la deformación cuaternaria en una de las cuencas intermontanas de la cuña orogénica activa.
El rumbo de las estructuras cuaternarias en el área de estudio es subparalelo al de las fallas que exhuman los cordones serranos circundantes. A partir del estudio estratigráfico, morfotectónico y estructural de los depósitos lacustres, se identificó un mínimo de cinco episodios de deformación afectando a la columna estratigráfica cuaternaria. Integrando perfiles estructurales balanceados con edades obtenidas en este trabajo y recopiladas de la bibliografía, se calcularon para el Pleistoceno mediotardío, tasas mínimas y máximas de acortamiento que varían entre 0,19-2,80 y 0,21-4,47 mm/a, respectivamente. Para comparar estos resultados con mediciones de la tectónica activa a escala regional se recopilaron datos de estaciones geodésicas del noroeste argentino, con los cuales se elaboró un perfil de velocidades horizontales. El perfil obtenido muestra un decrecimiento gradual de los vectores hacia el este, indicando actividad interna del orógeno en congruencia con los registros de actividad sísmica y compilación regional de las estructuras cuaternarias.
Además de la caracterización neotectónica de este sector de la Cordillera Oriental, el análisis estratigráfico de los depósitos lacustres ha permitido refinar la evolución geológica del sector central de los valles Calchaquíes durante el Cuaternario. De esta manera se han identificado al menos siete episodios de inundación lacustre relacionados con la desconexión del sistema fluvial con su nivel de base, dando lugar a sucesivos eventos de agradación y erosión. Las cotas máximas alcanzadas por los paleolagos, en conjunto con un modelo hidrológico previamente publicado para esta región, permitieron asimismo efectuar una comparación con el registro paleoclimático regional.
Los resultados de esta tesis representan un aporte significativo al conocimiento de la evolución tectónica y estratigráfica del sector central de los valles Calchaquíes durante el Cuaternario. Por otra parte, su integración a escala regional contribuye a comprender mejor la dinámica de la deformación en la cuña orogénica de piel gruesa del noroeste argentino.
Anthropogenic climate change alters the hydrological cycle. While certain areas experience more intense precipitation events, others will experience droughts and increased evaporation, affecting water storage in long-term reservoirs, groundwater, snow, and glaciers. High elevation environments are especially vulnerable to climate change, which will impact the water supply for people living downstream. The Himalaya has been identified as a particularly vulnerable system, with nearly one billion people depending on the runoff in this system as their main water resource. As such, a more refined understanding of spatial and temporal changes in the water cycle in high altitude systems is essential to assess variations in water budgets under different climate change scenarios.
However, not only anthropogenic influences have an impact on the hydrological cycle, but changes to the hydrological cycle can occur over geological timescales, which are connected to the interplay between orogenic uplift and climate change. However, their temporal evolution and causes are often difficult to constrain. Using proxies that reflect hydrological changes with an increase in elevation, we can unravel the history of orogenic uplift in mountain ranges and its effect on the climate.
In this thesis, stable isotope ratios (expressed as δ2H and δ18O values) of meteoric waters and organic material are combined as tracers of atmospheric and hydrologic processes with remote sensing products to better understand water sources in the Himalayas. In addition, the record of modern climatological conditions based on the compound specific stable isotopes of leaf waxes (δ2Hwax) and brGDGTs (branched Glycerol dialkyl glycerol tetraethers) in modern soils in four Himalayan river catchments was assessed as proxies of the paleoclimate and (paleo-) elevation. Ultimately, hydrological variations over geological timescales were examined using δ13C and δ18O values of soil carbonates and bulk organic matter originating from sedimentological sections from the pre-Siwalik and Siwalik groups to track the response of vegetation and monsoon intensity and seasonality on a timescale of 20 Myr.
I find that Rayleigh distillation, with an ISM moisture source, mainly controls the isotopic composition of surface waters in the studied Himalayan catchments. An increase in d-excess in the spring, verified by remote sensing data products, shows the significant impact of runoff from snow-covered and glaciated areas on the surface water isotopic values in the timeseries.
In addition, I show that biomarker records such as brGDGTs and δ2Hwax have the potential to record (paleo-) elevation by yielding a significant correlation with the temperature and surface water δ2H values, respectively, as well as with elevation. Comparing the elevation inferred from both brGDGT and δ2Hwax, large differences were found in arid sections of the elevation transects due to an additional effect of evapotranspiration on δ2Hwax. A combined study of these proxies can improve paleoelevation estimates and provide recommendations based on the results found in this study.
Ultimately, I infer that the expansion of C4 vegetation between 20 and 1 Myr was not solely dependent on atmospheric pCO2, but also on regional changes in aridity and seasonality from to the stable isotopic signature of the two sedimentary sections in the Himalaya (east and west).
This thesis shows that the stable isotope chemistry of surface waters can be applied as a tool to monitor the changing Himalayan water budget under projected increasing temperatures. Minimizing the uncertainties associated with the paleo-elevation reconstructions were assessed by the combination of organic proxies (δ2Hwax and brGDGTs) in Himalayan soil. Stable isotope ratios in bulk soil and soil carbonates showed the evolution of vegetation influenced by the monsoon during the late Miocene, proving that these proxies can be used to record monsoon intensity, seasonality, and the response of vegetation. In conclusion, the use of organic proxies and stable isotope chemistry in the Himalayas has proven to successfully record changes in climate with increasing elevation. The combination of δ2Hwax and brGDGTs as a new proxy provides a more refined understanding of (paleo-)elevation and the influence of climate.
Centroid moment tensor inversion can provide insight into ongoing tectonic processes and active faults. In the Alpine mountains (central Europe), challenges result from low signal-to-noise ratios of earthquakes with small to moderate magnitudes and complex wave propagation effects through the heterogeneous crustal structure of the mountain belt. In this thesis, I make use of the temporary installation of the dense AlpArray seismic network (AASN) to establish a work flow to study seismic source processes and enhance the knowledge of the Alpine seismicity. The cumulative thesis comprises four publications on the topics of large seismic networks, seismic source processes in the Alps, their link to tectonics and stress field, and the inclusion of small magnitude earthquakes into studies of active faults.
Dealing with hundreds of stations of the dense AASN requires the automated assessment of data and metadata quality. I developed the open source toolbox AutoStatsQ to perform an automated data quality control. Its first application to the AlpArray seismic network has revealed significant errors of amplitude gains and sensor orientations. A second application of the orientation test to the Turkish KOERI network, based on Rayleigh wave polarization, further illustrated the potential in comparison to a P wave polarization method. Taking advantage of the gain and orientation results of the AASN, I tested different inversion settings and input data types to approach the specific challenges of centroid moment tensor (CMT) inversions in the Alps. A comparative study was carried out to define the best fitting procedures.
The application to 4 years of seismicity in the Alps (2016-2019) substantially enhanced the amount of moment tensor solutions in the region. We provide a list of moment tensors solutions down to magnitude Mw 3.1. Spatial patterns of typical focal mechanisms were analyzed in the seismotectonic context, by comparing them to long-term seismicity, historical earthquakes and observations of strain rates. Additionally, we use our MT solutions to investigate stress regimes and orientations along the Alpine chain. Finally, I addressed the challenge of including smaller magnitude events into the study of active faults and source processes. The open-source toolbox Clusty was developed for the clustering of earthquakes based on waveforms recorded across a network of seismic stations. The similarity of waveforms reflects both, the location and the similarity of source mechanisms. Therefore the clustering bears the opportunity to identify earthquakes of similar faulting styles, even when centroid moment tensor inversion is not possible due to low signal-to-noise ratios of surface waves or oversimplified velocity models. The toolbox is described through an application to the Zakynthos 2018 aftershock sequence and I subsequently discuss its potential application to weak earthquakes (Mw<3.1) in the Alps.
Permafrost is warming globally, which leads to widespread permafrost thaw and impacts the surrounding landscapes, ecosystems and infrastructure. Especially ice-rich permafrost is vulnerable to rapid and abrupt thaw, resulting from the melting of excess ground ice. Local remote sensing studies have detected increasing rates of abrupt permafrost disturbances, such as thermokarst lake change and drainage, coastal erosion and RTS in the last two decades. All of which indicate an acceleration of permafrost degradation.
In particular retrogressive thaw slumps (RTS) are abrupt disturbances that expand by up to several meters each year and impact local and regional topographic gradients, hydrological pathways, sediment and nutrient mobilisation into aquatic systems, and increased permafrost carbon mobilisation. The feedback between abrupt permafrost thaw and the carbon cycle is a crucial component of the Earth system and a relevant driver in global climate models. However, an assessment of RTS at high temporal resolution to determine the dynamic thaw processes and identify the main thaw drivers as well as a continental-scale assessment across diverse permafrost regions are still lacking.
In northern high latitudes optical remote sensing is restricted by environmental factors and frequent cloud coverage. This decreases image availability and thus constrains the application of automated algorithms for time series disturbance detection for large-scale abrupt permafrost disturbances at high temporal resolution. Since models and observations suggest that abrupt permafrost disturbances will intensify, we require disturbance products at continental-scale, which allow for meaningful integration into Earth system models.
The main aim of this dissertation therefore, is to enhance our knowledge on the spatial extent and temporal dynamics of abrupt permafrost disturbances in a large-scale assessment. To address this, three research objectives were posed:
1. Assess the comparability and compatibility of Landsat-8 and Sentinel-2 data for a combined use in multi-spectral analysis in northern high latitudes.
2. Adapt an image mosaicking method for Landsat and Sentinel-2 data to create combined mosaics of high quality as input for high temporal disturbance assessments in northern high latitudes.
3. Automatically map retrogressive thaw slumps on the landscape-scale and assess their high temporal thaw dynamics.
We assessed the comparability of Landsat-8 and Sentinel-2 imagery by spectral comparison of corresponding bands. Based on overlapping same-day acquisitions of Landsat-8 and Sentinel-2 we derived spectral bandpass adjustment coefficients for North Siberia to adjust Sentinel-2 reflectance values to resemble Landsat-8 and harmonise the two data sets. Furthermore, we adapted a workflow to combine Landsat and Sentinel-2 images to create homogeneous and gap-free annual mosaics. We determined the number of images and cloud-free pixels, the spatial coverage and the quality of the mosaic with spectral comparisons to demonstrate the relevance of the Landsat+Sentinel-2 mosaics. Lastly, we adapted the automatic disturbance detection algorithm LandTrendr for large-scale RTS identification and mapping at high temporal resolution. For this, we modified the temporal segmentation algorithm for annual gradual and abrupt disturbance detection to incorporate the annual Landsat+Sentinel-2 mosaics. We further parametrised the temporal segmentation and spectral filtering for optimised RTS detection, conducted further spatial masking and filtering, and implemented a binary object classification algorithm with machine-learning to derive RTS from the LandTrendr disturbance output. We applied the algorithm to North Siberia, covering an area of 8.1 x 106 km2.
The spectral band comparison between same-day Landsat-8 and Sentinel-2 acquisitions already showed an overall good fit between both satellite products. However, applying the acquired spectral bandpass coefficients for adjustment of Sentinel-2 reflectance values, resulted in a near-perfect alignment between the same-day images. It can therefore be concluded that the spectral band adjustment succeeds in adjusting Sentinel-2 spectral values to those of Landsat-8 in North Siberia.
The number of available cloud-free images increased steadily between 1999 and 2019, especially intensified after 2016 with the addition of Sentinel-2 images. This signifies a highly improved input database for the mosaicking workflow. In a comparison of annual mosaics, the Landsat+Sentinel-2 mosaics always fully covered the study areas, while Landsat-only mosaics contained data-gaps for the same years. The spectral comparison of input images and Landsat+Sentinel-2 mosaic showed a high correlation between the input images and the mosaic bands, testifying mosaicking results of high quality. Our results show that especially the mosaic coverage for northern, coastal areas was substantially improved with the Landsat+Sentinel-2 mosaics. By combining data from both Landsat and Sentinel-2 sensors we reliably created input mosaics at high spatial resolution for comprehensive time series analyses.
This research presents the first automatically derived assessment of RTS distribution and temporal dynamics at continental-scale. In total, we identified 50,895 RTS, primarily located in ice-rich permafrost regions, as well as a steady increase in RTS-affected areas between 2001 and 2019 across North Siberia. From 2016 onward the RTS area increased more abruptly, indicating heightened thaw slump dynamics in this period. Overall, the RTS-affected area increased by 331 % within the observation period. Contrary to this, five focus sites show spatiotemporal variability in their annual RTS dynamics, alternating between periods of increased and decreased RTS development. This suggests a close relationship to varying thaw drivers. The majority of identified RTS was active from 2000 onward and only a small proportion initiated during the assessment period. This highlights that the increase in RTS-affected area was mainly caused by enlarging existing RTS and not by newly initiated RTS.
Overall, this research showed the advantages of combining Landsat and Sentinel-2 data in northern high latitudes and the improvements in spatial and temporal coverage of combined annual mosaics. The mosaics build the database for automated disturbance detection to reliably map RTS and other abrupt permafrost disturbances at continental-scale. The assessment at high temporal resolution further testifies the increasing impact of abrupt permafrost disturbances and likewise emphasises the spatio-temporal variability of thaw dynamics across landscapes. Obtaining such consistent disturbance products is necessary to parametrise regional and global climate change models, for enabling an improved representation of the permafrost thaw feedback.
Carbonatite magmatism is a highly efficient transport mechanism from Earth’s mantle to the crust, thus providing insights into the chemistry and dynamics of the Earth’s mantle. One evolving and promising tool for tracing magma interaction are stable iron isotopes, particularly because iron isotope fractionation is controlled by oxidation state and bonding environment. Meanwhile, a large data set on iron isotope fractionation in igneous rocks exists comprising bulk rock compositions and fractionation between mineral groups. Iron isotope data from natural carbonatite rocks are extremely light and of remarkably high variability. This resembles iron isotope data from mantle xenoliths, which are characterized by a variability in δ56Fe spanning three times the range found in basalts, and by the extremely light values of some whole rock samples, reaching δ56Fe as low as -0.69 ‰ in a spinel lherzolite. Cause to this large range of variations may be metasomatic processes, involving metasomatic agents like volatile bearing high-alkaline silicate melts or carbonate melts. The expected effects of metasomatism on iron isotope fractionation vary with parameters like melt/rock-ratio, reaction time, and the nature of metasomatic agents and mineral reactions involved. An alternative or additional way to enrich light isotopes in the mantle could be multiple phases of melt extraction. To interpret the existing data sets more knowledge on iron isotope fractionation factors is needed.
To investigate the behavior of iron isotopes in the carbonatite systems, kinetic and equilibration experiments in natro-carbonatite systems between immiscible silicate and carbonate melts were performed in an internally heated gas pressure vessel at intrinsic redox conditions at temperatures between 900 and 1200 °C and pressures of 0.5 and 0.7 GPa. The iron isotope compositions of coexisting silicate melt and carbonate melt were analyzed by solution MC-ICP-MS. The kinetic experiments employing a Fe-58 spiked starting material show that isotopic equilibrium is obtained after 48 hours. The experimental studies of equilibrium iron isotope fractionation between immiscible silicate and carbonate melts have shown that light isotopes are enriched in the carbonatite melt. The highest Δ56Fesil.m.-carb.melt (mean) of 0.13 ‰ was determined in a system with a strongly peralkaline silicate melt composition (ASI ≥ 0.21, Na/Al ≤ 2.7). In three systems with extremely peralkaline silicate melt compositions (ASI between 0.11 and 0.14) iron isotope fractionation could analytically not be resolved. The lowest Δ56Fesil.m.-carb.melt (mean) of 0.02 ‰ was determined in a system with an extremely peralkaline silicate melt composition (ASI ≤ 0.11 , Na/Al ≥ 6.1). The observed iron isotope fractionation is most likely governed by the redox conditions of the system. Yet, in the systems, where no fractionation occurred, structural changes induced by compositional changes possibly overrule the influence of redox conditions. This interpretation implicates, that the iron isotope system holds the potential to be useful not only for exploring redox conditions in magmatic systems, but also for discovering structural changes in a melt.
In situ iron isotope analyses by femtosecond laser ablation coupled to MC-ICP-MS on magnetite and olivine grains were performed to reveal variations in iron isotope composition on the micro scale. The investigated sample is a melilitite bomb from the Salt Lake Crater group at Honolulu (Oahu, Hawaii), showing strong evidence for interaction with a carbonatite melt. While magnetite grains are rather homogeneous in their iron isotope compositions, olivine grains span a far larger range in iron isotope ratios. The variability of δ56Fe in magnetite is limited from - 0.17 ‰ (± 0.11 ‰, 2SE) to +0.08 ‰ (± 0.09 ‰, 2SE). δ56Fe in olivine range from -0.66‰ (± 0.11 ‰, 2SE) to +0.10 ‰ (± 0.13 ‰, 2SE). Olivine and magnetite grains hold different informations regarding kinetic and equilibrium fractionation due to their different Fe diffusion coefficients. The observations made in the experiments and in the in situ iron isotope analyses suggest that the extremely light iron isotope signatures found in carbonatites are generated by several steps of isotope fractionation during carbonatite genesis. These may involve equilibrium and kinetic fractionation. Since iron isotopic signatures in natural systems are generated by a combination of multiple factors (pressure, temperature, redox conditions, phase composition and structure, time scale), multi tracer approaches are needed to explain signatures found in natural rocks.
This dissertation was carried out as part of the international and interdisciplinary graduate school StRATEGy. This group has set itself the goal of investigating geological processes that take place on different temporal and spatial scales and have shaped the southern central Andes. This study focuses on claystones and carbonates of the Yacoraite Fm. that were deposited between Maastricht and Dan in the Cretaceous Salta Rift Basin. The former rift basin is located in northwest Argentina and is divided into the sub-basins Tres Cruces, Metán-Alemanía and Lomas de Olmedo. The overall motivation for this study was to gain new knowledge about the evolution of marine and lacustrine conditions during the Yacoraite Fm. Deposit in the Tres Cruces and Metán-Alemanía sub-basins. Other important aspects that were examined within the scope of this dissertation are the conversion of organic matter from Yacoraite Fm. into oil and its genetic relationship to selected oils produced and natural oil spills. The results of my study show that the Yacoraite Fm. began to be deposited under marine conditions and that a lacustrine environment developed by the end of the deposition in the Tres Cruces and Metán-Alemanía Basins. In general, the kerogen of Yacoraite Fm. consists mainly of the kerogen types II, III and II / III mixtures. Kerogen type III is mainly found in samples from the Yacoraite Fm., whose TOC values are low. Due to the adsorption of hydrocarbons on the mineral surfaces (mineral matrix effect), the content of type III kerogen with Rock-Eval pyrolysis in these samples could be overestimated. Investigations using organic petrography show that the organic particles of Yacoraite Fm. mainly consist of alginites and some vitrinite-like particles. The pyrolysis GC of the rock samples showed that the Yacoraite Fm. generates low-sulfur oils with a predominantly low-wax, paraffinic-naphthenic-aromatic composition and paraffinic wax-rich oils. Small proportions of paraffinic, low-wax oils and a gas condensate-generating facies are also predicted. Here, too, mineral matrix effects were taken into account, which can lead to a quantitative overestimation of the gas-forming character.
The results of an additional 1D tank modeling carried out show that the beginning (10% TR) of the oil genesis took place between ≈10 Ma and ≈4 Ma. Most of the oil (from ≈50% to 65%) was generated prior to the development of structural traps formed during the Plio-Pleistocene Diaguita deformation phase. Only ≈10% of the total oil generated was formed and potentially trapped after the formation of structural traps. Important factors in the risk assessment of this petroleum system, which can determine the small amounts of generated and migrated oil, are the generally low TOC contents and the variable thickness of the Yacoraite Fm. Additional risks are associated with a low density of information about potentially existing reservoir structures and the quality of the overburden.