Refine
Has Fulltext
- no (253) (remove)
Year of publication
Language
- English (253)
Is part of the Bibliography
- yes (253)
Keywords
- organic solar cells (12)
- perovskite solar cells (11)
- morphology (5)
- Organic solar cells (4)
- charge transport (4)
- conjugated polymers (4)
- non-fullerene acceptors (4)
- open-circuit voltage (4)
- photoluminescence (4)
- solar cells (4)
- voltage losses (4)
- Solar cells (3)
- charge generation (3)
- mobility (3)
- organic photovoltaics (3)
- organic semiconductors (3)
- photovoltaic devices (3)
- polymer solar cells (3)
- 2D perovskites (2)
- Organic electronics (2)
- Organic semiconductors (2)
- PCPDTBT (2)
- UV-vis spectroscopy (2)
- bulk heterojunction (2)
- carbon nitride (2)
- charge transfer (2)
- charge-transfer states (2)
- conductivity (2)
- doping (2)
- driving force (2)
- hysteresis (2)
- inorganic perovskites (2)
- nonfullerene acceptors (2)
- nonradiative recombination (2)
- organic electronics (2)
- perovskite solar cell (2)
- photocurrent generation (2)
- quasi-Fermi level splitting (2)
- recombination (2)
- thin films (2)
- (Z)-isomer (1)
- Aggregate states (1)
- All-polymer heterojunctions (1)
- Alternating copolymers (1)
- Ambipolar charge transport (1)
- Ambipolar materials (1)
- Backbone modifications (1)
- Bilayer solar cells (1)
- Bulk heterojunction (1)
- CH center dot center dot center dot F hydrogen bonds (1)
- Capacitance spectroscopy (1)
- Carbon nitride (1)
- Carrier dynamics (1)
- Charge extraction (1)
- Charge generation (1)
- Charge recombination (1)
- Charge separation (1)
- Conformational disorder (1)
- Crystalline phases (1)
- CsPbI2Br (1)
- Donor materials (1)
- Donor-acceptor copolymers (1)
- Doped semiconductors (1)
- Effect of sintering (1)
- Efficiency optimization (1)
- Electric polarization (1)
- Electrical properties and parameters (1)
- Electron traps (1)
- Electronic and spintronic devices (1)
- Electronics, photonics and device physics (1)
- Energetic disorder (1)
- Energy science and technology (1)
- Energy-level alignment (1)
- Fermi-level alignment (1)
- Fermi-level pinning (1)
- Frank-Condon analysis (1)
- Free carrier generation (1)
- Hybrid solar cells (1)
- ISOS-L-1I protocol (1)
- Interface dipole (1)
- Interfaces (1)
- Interlayer (1)
- Intrachain order (1)
- Intragap states (1)
- Inverted solar cells (1)
- Kelvin probe (1)
- Linearly increasing voltage (CELIV) (1)
- Low band-gap (1)
- Low voltage losses (1)
- Microscopic morphology (1)
- Mobility imbalance (1)
- Mobility relaxation (1)
- Monte Carlo simulation (1)
- Multiple trapping model (1)
- Non-geminate recombination (1)
- Nonaqueous sol-gel (1)
- Nonradiative recombination (1)
- OFET (1)
- Open-circuit voltage (1)
- Optical modeling (1)
- Optoelectronic devices and components (1)
- Optoelectronic properties (1)
- Optoelectronics (1)
- Organic LEDs (1)
- PBT7 (1)
- PBTTT (1)
- PEDOT (1)
- Partially alternating copolymers (1)
- Perovskite solar cell (1)
- Photo-CELIV (1)
- Photocatalysis (1)
- Photoconductivity (1)
- Photocurrent (1)
- Photonic devices (1)
- Photovoltaic gap (1)
- Polymer infiltration (1)
- Polymer intermixing (1)
- Recombination losses (1)
- RhB degradation (1)
- RhB photodegradation (1)
- Semiconductors (1)
- SiO2 composite material (1)
- Solar energy and photovoltaic technology (1)
- Spectral diffusion (1)
- Statistical copolymers (1)
- Stille-type cross-coupling (1)
- Structure-property relationships (1)
- Sublimation with good yield (1)
- TCAD (1)
- Tandem solar cells (1)
- Thin nanocrystalline TiO2 layer (1)
- Time-dependent mobility (1)
- Time-of-flight (TOF) (1)
- Transient fluorescence (1)
- Transient photocurrent (1)
- Transport properties titania (1)
- UV nanoimprint lithography (1)
- Ultraviolet photoelectron spectroscopy (1)
- V-OC loss (1)
- Vacuum-level alignment (1)
- X-ray photoelectron spectroscopy (1)
- ZnO (1)
- absorption spectroscopy (1)
- aggregation (1)
- amorphous state (1)
- antireflection (1)
- aqueous solutions (1)
- built-in potential (1)
- cesium lead halides (1)
- characterization tools (1)
- charge accumulation (1)
- charge carrier extraction (1)
- charge carrier recombination (1)
- charge carrier transport (1)
- charge collection (1)
- charge generation layers (1)
- charge generation yield (1)
- charge injection across hybrid interfaces (1)
- charge recombination (1)
- charge recombination yield (1)
- charge selectivity (1)
- charge transfer states (1)
- charge transfers (1)
- charge transport layers (1)
- conducting polymer (1)
- conducting polymers (1)
- conformational analysis (1)
- conjugated polyelectrolytes (1)
- crystal orientation (1)
- crystalline ordering (1)
- crystallization (1)
- degradation (1)
- diffusion length (1)
- domain purity (1)
- donor-acceptor interfaces (1)
- double-layer (1)
- drift length (1)
- efficiency potentials (1)
- electro-optical materials (1)
- electrodes (1)
- electron contact (1)
- electron-transport layers (1)
- energetic disorder (1)
- energetic disorders (1)
- energetic offset (1)
- energy gradients (1)
- energy losses (1)
- energy-level alignments (1)
- excess energy (1)
- excitonic materials (1)
- external quantum efficiency (1)
- extraction (1)
- field-effect-transistor (1)
- figure of merit (1)
- fill factor (1)
- films (1)
- flexible (1)
- fluorescence (or Forster) (1)
- fluorinated organic spacer (1)
- fluorination (1)
- fullerene (1)
- fullerenes (1)
- geminate recombination (1)
- geometrical deformations (1)
- glycerol oxidation (1)
- heterojunction silicon solar cells (1)
- high performance polymers (1)
- hole extraction (1)
- hole selective materials (1)
- host-guest systems (1)
- hybrid metal oxides (1)
- interaction parameter (1)
- interface engineering (1)
- interface recombination (1)
- interfaces (1)
- interfacial layers (1)
- interfacial recombination (1)
- lead halide perovskite films (1)
- lead halide perovskites (1)
- lifetime‐ mobility product (1)
- light management (1)
- light polarisation (1)
- light-emitting diodes (1)
- liquid crystal polymers (1)
- mesocrystals (1)
- metal oxide (1)
- metal-free photocatalysis (1)
- microscopy (1)
- mixed domains (1)
- mobile ions (1)
- molar mass distribution (1)
- molecular doping (1)
- molecular dynamics method (1)
- molecular weight (1)
- molecular weight distribution (1)
- molybdenum oxide (1)
- naphthalenediimide (1)
- non-Langevin recombination (1)
- non-Langevin reduction factors (1)
- non-radiative interface recombination (1)
- non-radiative recombination (1)
- nonradiative losses (1)
- nonradiative voltage losses (1)
- nucleation (1)
- optical hole burning (1)
- optical simulations (1)
- organic interfaces (1)
- organic light-emitting diode (1)
- organohalide lead perovskites (1)
- oxygen plasma (1)
- passivation (1)
- phase purity (1)
- phase transition (1)
- phase transitions (1)
- phosphonic acid (1)
- photochemistry (1)
- photophysics (1)
- photostability (1)
- poly(heptazine imide) (1)
- polymer:fullerene bulk heterojunction (1)
- power conversion efficiency (1)
- quasi-Fermi level (1)
- quasi-steady-state photoinduced absorptions (1)
- random copolymer (1)
- recombinations (1)
- regular planar architecture (1)
- resonance energy transfer (1)
- resonant X-ray scattering (1)
- selective contact (1)
- self-assembled monolayers (1)
- semiconducting polymers (1)
- simulations (1)
- small molecules (1)
- spectroelectrochemistry (1)
- spin-related factors (1)
- spiro-OMeTAD (1)
- splitting (1)
- steady‐ state photoconductance (1)
- structure (1)
- sulfur (1)
- surface (1)
- surface band bending (1)
- surface modification (1)
- surface photovoltage (1)
- surface states (1)
- surface wetting (1)
- synthesis (1)
- tandem solar cells (1)
- temperature dependence (1)
- ternary blends (1)
- thermoresponsive polymers (1)
- thick junctions (1)
- thiophene (1)
- time of flight (1)
- transient absorption spectroscopy (1)
- transient spectroscopy (1)
- transport layer (1)
- transport layers (1)
- triple-cation perovskite (1)
- triplet excited states (1)
- ultraviolet photoelectron spectroscopy (1)
- upconversion (1)
- water reduction reactions (1)
- work function (1)
Institute
Non-fullerene acceptors (NFAs) as used in state-of-the-art organic solar cells feature highly crystalline layers that go along with low energetic disorder.
Here, the crucial role of energetic disorder in blends of the donor polymer PM6 with two Y-series NFAs, Y6, and N4 is studied.
By performing temperature-dependent charge transport and recombination studies, a consistent picture of the shape of the density of state distributions for free charges in the two blends is developed, allowing an analytical description of the dependence of the open-circuit voltage V-OC on temperature and illumination intensity.
Disorder is found to influence the value of the V-OC at room temperature, but also its progression with temperature. Here, the PM6:Y6 blend benefits substantially from its narrower state distributions.
The analysis also shows that the energy of the equilibrated free charge population is well below the energy of the NFA singlet excitons for both blends and possibly below the energy of the populated charge transfer manifold, indicating a down-hill driving force for free charge formation.
It is concluded that energetic disorder of charge-separated states has to be considered in the analysis of the photovoltaic properties, even for the more ordered PM6:Y6 blend.
Perovskite/silicon tandem photovoltaics (PVs) promise to accelerate the decarbonization of our energy systems. Here, we present a thorough subcell diagnosis methodology to reveal deep insights into the practical efficiency limitations of state-of-the-art perovskite/silicon tandem PVs. Our subcell selective intensity-dependent photoluminescence (PL) and injection-dependent electroluminescence (EL) measurements allow independent assessment of pseudo-V-OC and power conversion efficiencies (PCEs) for both subcells. We reveal identical metrics from PL and EL, which implies well-aligned energy levels throughout the entire cell. Relatively large ideality factors and insufficient charge extraction, however, cause each a fill factor penalty of about 6% (absolute). Using partial device stacks, we then identify significant losses in standard perovskite subcells due to bulk and interfacial recombination. Lastly, we present strategies to minimize these losses using triple halide (CsFAPb(IBrCI)(3)) based perovskites. Our results give helpful feedback for device development and lay the foundation toward advanced perovskite/silicon tandem PVs capable of exceeding 33% PCE.
Recent advances in organic solar cell performance have been mainly driven forward by combining high-performance p-type donor-acceptor copolymers (e.g.PM6) and non-fullerene small molecule acceptors (e.g.Y6) as bulk-heterojunction layers. A general observation in such devices is that the device performance, e.g., the open-circuit voltage, is strongly dependent on the processing solvent. While the morphology is a typically named key parameter, the energetics of donor-acceptor blends are equally important, but less straightforward to access in the active multicomponent layer. Here, we propose to use spectral onsets during electrochemical cycling in a systematic spectroelectrochemical study of blend films to access the redox behavior and the frontier orbital energy levels of the individual compounds. Our study reveals that the highest occupied molecular orbital offset (Delta E-HOMO) in PM6:Y6 blends is similar to 0.3 eV, which is comparable to the binding energy of Y6 excitons and therefore implies a nearly zero driving force for the dissociation of Y6 excitons. Switching the PM6 orientation in the blend films from face-on to edge-on in bulk has only a minor influence on the positions of the energy levels, but shows significant differences in the open circuit voltage of the device. We explain this phenomenon by the different interfacial molecular orientations, which are known to affect the non-radiative decay rate of the charge-transfer state. We compare our results to ultraviolet photoelectron spectroscopy data, which shows distinct differences in the HOMO offsets in the PM6:Y6 blend compared to neat films. This highlights the necessity to measure the energy levels of the individual compounds in device-relevant blend films.
Organic solar cells (OSCs) have progressed rapidly in recent years through the development of novel organic photoactive materials, especially non-fullerene acceptors (NFAs). Consequently, OSCs based on state-of-the-art NFAs have reached significant milestones, such as similar to 19% power conversion efficiencies (PCEs) and small energy losses (less than 0.5 eV). Despite these significant advances, understanding of the interplay between molecular structure and optoelectronic properties lags significantly behind. For example, despite the theoretical framework for describing the energetic disorder being well developed for the case of inorganic semiconductors, the question of the applicability of classical semiconductor theories in analyzing organic semiconductors is still under debate. A general observation in the inorganic field is that inorganic photovoltaic materials possessing a polycrystalline microstructure exhibit suppressed disorder properties and better charge carrier transport compared to their amorphous analogs. Accordingly, this principle extends to the organic semiconductor field as many organic photovoltaic materials are synthesized to pursue polycrystalline-like features. Yet, there appears to be sporadic examples that exhibit an opposite trend. However, full studies decoupling energetic disorder from aggregation effects have largely been left out. Hence, the potential role of the energetic disorder in OSCs has received little attention. Interestingly, recently reported state-of-the-art NFA-based devices could achieve a small energetic disorder and high PCE at the same time; and interest in this investigation related to the disorder properties in OSCs was revived. In this contribution, progress in terms of the correlation between molecular design and energetic disorder is reviewed together with their effects on the optoelectronic mechanism and photovoltaic performance. Finally, the specific challenges and possible solutions in reducing the energetic disorder of OSCs from the viewpoint of materials and devices are proposed.
In organic solar cells, the resulting device efficiency depends strongly on the local morphology and intermolecular interactions of the blend film. Optical spectroscopy was used to identify the spectral signatures of interacting chromophores in blend films of the donor polymer PM6 with two state-of-the-art nonfullerene acceptors, Y6 and N4, which differ merely in the branching point of the side chain. From temperature-dependent absorption and luminescence spectroscopy in solution, it is inferred that both acceptor materials form two types of aggregates that differ in their interaction energy. Y6 forms an aggregate with a predominant J-type character in solution, while for N4 molecules the interaction is predominantly in a H-like manner in solution and freshly spin-cast film, yet the molecules reorient with respect to each other with time or thermal annealing to adopt a more J-type interaction. The different aggregation behavior of the acceptor materials is also reflected in the blend films and accounts for the different solar cell efficiencies reported with the two blends.
The interplay between free charge carriers, charge transfer (CT) states and singlet excitons (S-1) determines the recombination pathway and the resulting open circuit voltage (V-OC) of organic solar cells.
By combining a well-aggregated low bandgap polymer with different blend ratios of the fullerenes PCBM and ICBA, the energy of the CT state (E-CT) is varied by 130 meV while leaving the S-1 energy of the polymer (ES1\[{E_{{{\rm{S}}_1}}}\]) unaffected.
It is found that the polymer exciton dominates the radiative properties of the blend when ECT\[{E_{{\rm{CT}}}}\] approaches ES1\[{E_{{{\rm{S}}_1}}}\], while the V-OC remains limited by the non-radiative decay of the CT state.
It is concluded that an increasing strength of the exciton in the optical spectra of organic solar cells will generally decrease the non-radiative voltage loss because it lowers the radiative V-OC limit (V-OC,V-rad), but not because it is more emissive.
The analysis further suggests that electronic coupling between the CT state and the S-1 will not improve the V-OC, but rather reduce the V-OC,V-rad.
It is anticipated that only at very low CT state absorption combined with a fairly high CT radiative efficiency the solar cell benefit from the radiative properties of the singlet excitons.
Inorganic perovskite solar cells show excellent thermal stability, but the reported power conversion efficiencies are still lower than for organic-inorganic perovskites. This is mainly caused by lower open-circuit voltages (V(OC)s). Herein, the reasons for the low V-OC in inorganic CsPbI2Br perovskite solar cells are investigated. Intensity-dependent photoluminescence measurements for different layer stacks reveal that n-i-p and p-i-n CsPbI2Br solar cells exhibit a strong mismatch between quasi-Fermi level splitting (QFLS) and V-OC. Specifically, the CsPbI2Br p-i-n perovskite solar cell has a QFLS-e center dot V-OC mismatch of 179 meV, compared with 11 meV for a reference cell with an organic-inorganic perovskite of similar bandgap. On the other hand, this study shows that the CsPbI2Br films with a bandgap of 1.9 eV have a very low defect density, resulting in an efficiency potential of 20.3% with a MeO-2PACz hole-transporting layer and 20.8% on compact TiO2. Using ultraviolet photoelectron spectroscopy measurements, energy level misalignment is identified as a possible reason for the QFLS-e center dot V-OC mismatch and strategies for overcoming this V-OC limitation are discussed. This work highlights the need to control the interfacial energetics in inorganic perovskite solar cells, but also gives promise for high efficiencies once this issue is resolved.
Traditional inorganic semiconductors can be electronically doped with high precision. Conversely, there is still conjecture regarding the assessment of the electronic doping density in metal-halide perovskites, not to mention of a control thereof. This paper presents a multifaceted approach to determine the electronic doping density for a range of different lead-halide perovskite systems. Optical and electrical characterization techniques, comprising intensity-dependent and transient photoluminescence, AC Hall effect, transfer-length-methods, and charge extraction measurements were instrumental in quantifying an upper limit for the doping density. The obtained values are subsequently compared to the electrode charge per cell volume under short-circuit conditions ( CUbi/eV), which amounts to roughly 10(16) cm(-3). This figure of merit represents the critical limit below which doping-induced charges do not influence the device performance. The experimental results consistently demonstrate that the doping density is below this critical threshold 10(12) cm(-3), which means << CUbi / e V) for all common lead-based metal-halide perovskites. Nevertheless, although the density of doping-induced charges is too low to redistribute the built-in voltage in the perovskite active layer, mobile ions are present in sufficient quantities to create space-charge-regions in the active layer, reminiscent of doped pn-junctions. These results are well supported by drift-diffusion simulations, which confirm that the device performance is not affected by such low doping densities.
The combined effect of ultraviolet (UV) light soaking and self-assembled monolayer deposition on the work function (WF) of thin ZnO layers and on the efficiency of hole injection into the prototypical conjugated polymer poly(3-hexylthiophen-2,5-diyl) (P3HT) is systematically investigated. It is shown that the WF and injection efficiency depend strongly on the history of UV light exposure. Proper treatment of the ZnO layer enables ohmic hole injection into P3HT, demonstrating ZnO as a potential anode material for organic optoelectronic devices. The results also suggest that valid conclusions on the energy-level alignment at the ZnO/organic interfaces may only be drawn if the illumination history is precisely known and controlled. This is inherently problematic when comparing electronic data from ultraviolet photoelectron spectroscopy (UPS) measurements carried out under different or ill-defined illumination conditions.
The enhancement and control of the electrical conductivity of organic semiconductors is fundamental for their use in optoelectronic applications and can be achieved by molecular doping, which introduces additional charge carriers through electron transfer between a dopant molecule and the organic semiconductor. Here, we use Electron Paramagnetic Resonance (EPR) spectroscopy to characterise the unpaired spins associated with the charges generated by molecular doping of the prototypical organic semiconductor poly(3-hexylthiophene) (P3HT) with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F(4)TCNQ) and tris(pentafluorophenyl)borane (BCF). The EPR results reveal the P3HT radical cation as the only paramagnetic species in BCF-doped P3HT films and show evidence for increased mobility of the detected spins at high doping concentrations as well as formation of antiferromagnetically coupled spin pairs leading to decreased spin concentrations at low temperatures. The EPR signature for F(4)TCNQ-doped P3HT is found to be determined by spin exchange between P3HT radical cations and F(4)TCNQ radical anions. Results from continuous-wave and pulse EPR measurements suggest the presence of the unpaired spin on P3HT in a multitude of environments, ranging from free P3HT radical cations with similar properties to those observed in BCF-doped P3HT, to pairs of dipolar and exchange-coupled spins on P3HT and the dopant anion. Characterisation of the proton hyperfine interactions by ENDOR allowed quantification of the extent of spin delocalisation and revealed reduced delocalisation in the F(4)TCNQ-doped P3HT films.