Refine
Has Fulltext
- no (254) (remove)
Year of publication
Language
- English (254)
Is part of the Bibliography
- yes (254)
Keywords
- organic solar cells (12)
- perovskite solar cells (11)
- morphology (5)
- Organic solar cells (4)
- charge transport (4)
- conjugated polymers (4)
- non-fullerene acceptors (4)
- open-circuit voltage (4)
- photoluminescence (4)
- solar cells (4)
- voltage losses (4)
- Solar cells (3)
- charge generation (3)
- mobility (3)
- organic photovoltaics (3)
- organic semiconductors (3)
- photovoltaic devices (3)
- polymer solar cells (3)
- 2D perovskites (2)
- Organic electronics (2)
- Organic semiconductors (2)
- PCPDTBT (2)
- UV-vis spectroscopy (2)
- bulk heterojunction (2)
- carbon nitride (2)
- charge transfer (2)
- charge-transfer states (2)
- conductivity (2)
- doping (2)
- driving force (2)
- hysteresis (2)
- inorganic perovskites (2)
- nonfullerene acceptors (2)
- nonradiative recombination (2)
- organic electronics (2)
- perovskite solar cell (2)
- photocurrent generation (2)
- quasi-Fermi level splitting (2)
- recombination (2)
- thin films (2)
- (Z)-isomer (1)
- Aggregate states (1)
- All-polymer heterojunctions (1)
- Alternating copolymers (1)
- Ambipolar charge transport (1)
- Ambipolar materials (1)
- Backbone modifications (1)
- Bilayer solar cells (1)
- Bulk heterojunction (1)
- CH center dot center dot center dot F hydrogen bonds (1)
- Capacitance spectroscopy (1)
- Carbon nitride (1)
- Carrier dynamics (1)
- Charge extraction (1)
- Charge generation (1)
- Charge recombination (1)
- Charge separation (1)
- Conformational disorder (1)
- Crystalline phases (1)
- CsPbI2Br (1)
- Donor materials (1)
- Donor-acceptor copolymers (1)
- Doped semiconductors (1)
- Effect of sintering (1)
- Efficiency optimization (1)
- Electric polarization (1)
- Electrical properties and parameters (1)
- Electron traps (1)
- Electronic and spintronic devices (1)
- Electronics, photonics and device physics (1)
- Energetic disorder (1)
- Energy science and technology (1)
- Energy-level alignment (1)
- Fermi-level alignment (1)
- Fermi-level pinning (1)
- Frank-Condon analysis (1)
- Free carrier generation (1)
- Hybrid solar cells (1)
- ISOS-L-1I protocol (1)
- Interface dipole (1)
- Interfaces (1)
- Interlayer (1)
- Intrachain order (1)
- Intragap states (1)
- Inverted solar cells (1)
- Kelvin probe (1)
- Linearly increasing voltage (CELIV) (1)
- Low band-gap (1)
- Low voltage losses (1)
- Microscopic morphology (1)
- Mobility imbalance (1)
- Mobility relaxation (1)
- Monte Carlo simulation (1)
- Multiple trapping model (1)
- Non-geminate recombination (1)
- Nonaqueous sol-gel (1)
- Nonradiative recombination (1)
- OFET (1)
- Open-circuit voltage (1)
- Optical modeling (1)
- Optoelectronic devices and components (1)
- Optoelectronic properties (1)
- Optoelectronics (1)
- Organic LEDs (1)
- PBT7 (1)
- PBTTT (1)
- PEDOT (1)
- Partially alternating copolymers (1)
- Perovskite solar cell (1)
- Photo-CELIV (1)
- Photocatalysis (1)
- Photoconductivity (1)
- Photocurrent (1)
- Photonic devices (1)
- Photovoltaic gap (1)
- Polymer infiltration (1)
- Polymer intermixing (1)
- Recombination losses (1)
- RhB degradation (1)
- RhB photodegradation (1)
- Semiconductors (1)
- SiO2 composite material (1)
- Solar energy and photovoltaic technology (1)
- Spectral diffusion (1)
- Statistical copolymers (1)
- Stille-type cross-coupling (1)
- Structure-property relationships (1)
- Sublimation with good yield (1)
- TCAD (1)
- Tandem solar cells (1)
- Thin nanocrystalline TiO2 layer (1)
- Time-dependent mobility (1)
- Time-of-flight (TOF) (1)
- Transient fluorescence (1)
- Transient photocurrent (1)
- Transport properties titania (1)
- UV nanoimprint lithography (1)
- Ultraviolet photoelectron spectroscopy (1)
- V-OC loss (1)
- Vacuum-level alignment (1)
- X-ray photoelectron spectroscopy (1)
- ZnO (1)
- absorption spectroscopy (1)
- aggregation (1)
- amorphous state (1)
- antireflection (1)
- aqueous solutions (1)
- built-in potential (1)
- cesium lead halides (1)
- characterization tools (1)
- charge accumulation (1)
- charge carrier extraction (1)
- charge carrier recombination (1)
- charge carrier transport (1)
- charge collection (1)
- charge generation layers (1)
- charge generation yield (1)
- charge injection across hybrid interfaces (1)
- charge recombination (1)
- charge recombination yield (1)
- charge selectivity (1)
- charge transfer states (1)
- charge transfers (1)
- charge transport layers (1)
- conducting polymer (1)
- conducting polymers (1)
- conformational analysis (1)
- conjugated polyelectrolytes (1)
- crystal orientation (1)
- crystalline ordering (1)
- crystallization (1)
- degradation (1)
- diffusion length (1)
- domain purity (1)
- donor-acceptor interfaces (1)
- double-layer (1)
- drift length (1)
- efficiency potentials (1)
- electro-optical materials (1)
- electrodes (1)
- electron contact (1)
- electron-transport layers (1)
- energetic disorder (1)
- energetic disorders (1)
- energetic offset (1)
- energy gradients (1)
- energy losses (1)
- energy-level alignments (1)
- excess energy (1)
- excitonic materials (1)
- external quantum efficiency (1)
- extraction (1)
- field-effect-transistor (1)
- figure of merit (1)
- fill factor (1)
- films (1)
- flexible (1)
- fluorescence (or Forster) (1)
- fluorinated organic spacer (1)
- fluorination (1)
- fullerene (1)
- fullerenes (1)
- geminate recombination (1)
- geometrical deformations (1)
- glycerol oxidation (1)
- heterojunction silicon solar cells (1)
- high performance polymers (1)
- hole extraction (1)
- hole selective materials (1)
- host-guest systems (1)
- hybrid metal oxides (1)
- interaction parameter (1)
- interface engineering (1)
- interface recombination (1)
- interfaces (1)
- interfacial layers (1)
- interfacial recombination (1)
- lead halide perovskite films (1)
- lead halide perovskites (1)
- lifetime‐ mobility product (1)
- light management (1)
- light polarisation (1)
- light-emitting diodes (1)
- liquid crystal polymers (1)
- mesocrystals (1)
- metal oxide (1)
- metal-free photocatalysis (1)
- microscopy (1)
- mixed domains (1)
- mobile ions (1)
- molar mass distribution (1)
- molecular doping (1)
- molecular dynamics method (1)
- molecular weight (1)
- molecular weight distribution (1)
- molybdenum oxide (1)
- naphthalenediimide (1)
- non-Langevin recombination (1)
- non-Langevin reduction factors (1)
- non-radiative interface recombination (1)
- non-radiative recombination (1)
- nonradiative losses (1)
- nonradiative voltage losses (1)
- nucleation (1)
- optical hole burning (1)
- optical simulations (1)
- organic interfaces (1)
- organic light-emitting diode (1)
- organohalide lead perovskites (1)
- oxygen plasma (1)
- passivation (1)
- phase purity (1)
- phase transition (1)
- phase transitions (1)
- phosphonic acid (1)
- photochemistry (1)
- photophysics (1)
- photostability (1)
- poly(heptazine imide) (1)
- polymer:fullerene bulk heterojunction (1)
- power conversion efficiency (1)
- quasi-Fermi level (1)
- quasi-steady-state photoinduced absorptions (1)
- random copolymer (1)
- recombinations (1)
- regular planar architecture (1)
- resonance energy transfer (1)
- resonant X-ray scattering (1)
- selective contact (1)
- self-assembled monolayers (1)
- semiconducting polymers (1)
- simulations (1)
- small molecules (1)
- spectroelectrochemistry (1)
- spin-related factors (1)
- spiro-OMeTAD (1)
- splitting (1)
- steady‐ state photoconductance (1)
- structure (1)
- sulfur (1)
- surface (1)
- surface band bending (1)
- surface modification (1)
- surface photovoltage (1)
- surface states (1)
- surface wetting (1)
- synthesis (1)
- tandem solar cells (1)
- temperature dependence (1)
- ternary blends (1)
- thermoresponsive polymers (1)
- thick junctions (1)
- thiophene (1)
- time of flight (1)
- transient absorption spectroscopy (1)
- transient spectroscopy (1)
- transport layer (1)
- transport layers (1)
- triple-cation perovskite (1)
- triplet excited states (1)
- ultraviolet photoelectron spectroscopy (1)
- upconversion (1)
- water reduction reactions (1)
- work function (1)
Institute
The delayed luminescence and phosphorescence of ladder-type methyl-poly(para-phenylene) (MeLPPP) doped with benzil at a concentration of 20% by weight has been measured. The introduction of benzil leads to a dramatic reduction of the polymer singlet emission. At the same time, a new band with maximum at 611 nm appears, corresponding to the phosphorescence of MeLPPP. The phosphorescence decay on the short time scale is close to an exponential law with a time decay of 15 ms. This indicates that benzil can efficiently sensitize the phosphorescence of the polymer. In addition, a broad and featureless emission is observed in the delayed luminescence spectra of benzil-doped MeLPPP, which is attributed to an exciplex formed between the polymer host and the dopant. We further observe that the delayed fluorescence is enhanced by the addition of benzil. It is concluded that the delayed fluorescence of benzil-doped MeLPPP is mainly due to the annihilation of triplet excitons on the polymer. Finally, efficient triplet-triplet energy transfer from the benzil-doped polymer to the red-emitting phosphorescent dye Pt(II)octaethylporphyrin is established. (C) 2004 American Institute of Physics
The luminescence of a ladder-type methyl-poly(para-phenylene) (MeLPPP) doped with platinum-porphyrin dye PtOEP covering the concentration 10(-3)-5% by weight has been measured employing cw and transient techniques. Upon excitation into the range of absorption of the host, strong phosphorescence of the dopant is observed. Possible ways of populating the dopant triplet state are considered. (c) 2004 Elsevier B.V. All rights reserved
Energy transfer in a ladder-type methyl-poly(para-phenylene) doped by Pt(II)octaethylporphyrin
(2004)
The luminescence of a ladder-type methyl-poly(para-phenylene) (MeLPPP) doped by platinum-porphyrin dye PtOEP covering the concentration 10(-3) to 5% by weight has been measured employing cw and transient techniques. Upon excitating into the range of absorption of the host strong phosphorescence of the dopant is observed. Possible ways of populating of the dopant triplet state are considered. It is shown that the main channel is singlet-singlet energy transfer among chromophor groups of the polymer followed by Forster-type transfer to the guest and subsequent intersystem crossing. (C) 2003 Elsevier B.V. All rights reserved
New materials for polymer organic light-emitting diodes based on a polymer matrix doped with phosphorescent dyes are presented. The matrix system is based on a polystyrene backbone bearing either electron or hole transporting units at the 4-position of each repeat unit. Random copolymers and polymer blend systems of the homopolymers are prepared, both with 62 wt.% electron transporting and 38 wt.% hole transporting moieties. Adding a green electrophosphorescent dye to the polymer matrix leads to efficient electroluminescence with a maximum current efficiency of 35 cd/A and a maximum external quantum efficiency of up to 10%. The mobilities of electrons and holes in the dye-doped copolymer, as measured by transient electroluminescence, are around 5 x 10(-5) and 5 x 10(-6) cm(2)/Vs, respectively, while the blend of the two homopolymers exhibits slightly lower mobilities of both types of carriers. Despite the pronounced imbalance of charge transport, the device performance is almost entirely limited by the phosphorescence efficiency of the dye, implying balanced flow of holes and electrons into the active region. Also, devices made with either the copolymer or the blend yielded very similar device efficiencies, despite the noticeable difference in electron and hole mobility. It is proposed that electrons are efficiently blocked at the interlayer and that the so-formed space charge assists the balanced injection of holes.
The method of current extraction under linear increasing voltages (CELIV) allows for the simultaneous determination of charge mobilities and charge densities directly in thin-film geometries as used in organic photovoltaic (OPV) cells. It has been specifically applied to investigate the interrelation of microstructure and charge-transport properties in such systems. Numerical and analytical calculations presented in this work show that the evaluation of CELIV transients with the commonly used analysis scheme is error prone once charge recombination and, possibly, field- dependent charge mobilities are taken into account. The most important effects are an apparent time dependence of charge mobilities and errors in the determined field dependencies. Our results implicate that reports on time-dependent mobility relaxation in OPV materials obtained by the CELIV technique should be carefully revisited and confirmed by other measurement methods.
Among the parameters that characterize a solar cell and define its power-conversion efficiency, the fill factor is the least well understood, making targeted improvements difficult. Here we quantify the competition between charge extraction and recombination by using a single parameter theta, and we demonstrate that this parameter is directly related to the fill factor of many different bulk-heterojunction solar cells. Our finding is supported by experimental measurements on 15 different donor: acceptor combinations, as well as by drift-diffusion simulations of organic solar cells in which charge-carrier mobilities, recombination rate, light intensity, energy levels and active-layer thickness are all varied over wide ranges to reproduce typical experimental conditions. The results unify the fill factors of several very different donor: acceptor combinations and give insight into why fill factors change so much with thickness, light intensity and materials properties. To achieve fill factors larger than 0.8 requires further improvements in charge transport while reducing recombination.
The best organic solar cells (OSCs) achieve comparable peak external quantum efficiencies and fill factors as conventional photovoltaic devices. However, their voltage losses are much higher, in particular those due to nonradiative recombination. To investigate the possible role of triplet states on the donor or acceptor materials in this process, model systems comprising Zn- and Cu-phthalocyanine (Pc), as well as fluorinated versions of these donors, combined with C-60 as acceptor are studied. Fluorination allows tuning the energy level alignment between the lowest energy triplet state (T-1) and the charge-transfer (CT) state, while the replacement of Zn by Cu as the central metal in the Pcs leads to a largely enhanced spin-orbit coupling. Only in the latter case, a substantial influence of the triplet state on the nonradiative voltage losses is observed. In contrast, it is found that for a large series of typical OSC materials, the relative energy level alignment between T-1 and the CT state does not substantially affect nonradiative voltage losses.
Organic solar cells demonstrate external quantum efficiencies and fill factors approaching those of conventional photovoltaic technologies. However, as compared with the optical gap of the absorber materials, their open-circuit voltage is much lower, largely due to the presence of significant non-radiative recombination. Here, we study a large data set of published and new material combinations and find that non-radiative voltage losses decrease with increasing charge-transfer-state energies. This observation is explained by considering non-radiative charge-transfer-state decay as electron transfer in the Marcus inverted regime, being facilitated by a common skeletal molecular vibrational mode. Our results suggest an intrinsic link between non-radiative voltage losses and electron-vibration coupling, indicating that these losses are unavoidable. Accordingly, the theoretical upper limit for the power conversion efficiency of single-junction organic solar cells would be reduced to about 25.5% and the optimal optical gap increases to (1.45-1.65) eV, that is, (0.2-0.3) eV higher than for technologies with minimized non-radiative voltage losses.