Filtern
Volltext vorhanden
- nein (5)
Erscheinungsjahr
- 2009 (5) (entfernen)
Dokumenttyp
Sprache
- Englisch (5)
Gehört zur Bibliographie
- ja (5)
Institut
This paper is focused on the influence of added polyampholyte, namely poly(N,N;-diallyl-N,N;- dimethyl-alt-maleamic carboxylate) on the inverse micellar phase range of the pseudo-ternary system consisting of toluene-pentanol (1:1)/SDS/water in dependence on the pH value and the temperature. Investigations on phase behavior have revealed that a greater extension in direction to the water-rich corner can be found at pH 4 compared to pH 9. In order to understand changes in the microstructure, polymer-surfactant interactions in dependence on pH have been examined by means of diffusion-ordered spectroscopy, differential scanning calorimetry, as well as conductivity measurements. The results have proven that the present microemulsion consists of water-in-oil droplets, with the polyampholyte located more in the inner core of the water droplets at pH 9 rather than at the interphase of the surfactant film at pH 4.
The epoxy system containing diglycidyl ether of bisphenol A and 4,4'-diaminodiphenyl sulfone is modified with poly(acrylonitrile-butadiene-styrene) (ABS) to explore the effects of the ABS content on the phase morphology, mechanism of phase separation, and viscoelastic properties. The amount of ABS in the blends was 5, 10, 15, and 20 parts per hundred of epoxy resin (phr). Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were employed to investigate the final morphology of ABS-modified epoxy blends. Scanning electron microscopic studies of 15 phr ABS-modified epoxy blends reveal a bicontinuous structure in which both epoxy and ABS are continuous, with substructures of the ABS phase dispersed in the continuous epoxy phase and substructures of the epoxy phase dispersed in the continuous ABS phase. TEM micrographs of 15 phr ABS-modified epoxy blends confirm the results observed by SEM. TEM micrographs reveal the existence of nanosubstructures of ABS in 20 phr ABS-modified epoxy blends. To the best of our knowledge, to date, nanosubstructures have never been reported in any epoxy/thermoplastic blends. The influence of the concentration of the thermoplastic on the generated morphology as analyzed by SEM and TEM was explained in detail. The evolution and mechanism of phase separation was investigated in detail by optical microscopy (OM) and small-angle laser light scattering (SALLS). At concentrations lower than 10 phr the system phase separates through nucleation and growth (NG). However, at higher concentrations, 15 and 20 phr, the blends phase separate through both NG and spinodal decomposition mechanisms. On the basis of OM and SALLS, we conclude that the phenomenon of complex substructure formation in dynamic asymmetric blends is due to the combined effect of hydrodynamics and viscoelasticity. Additionally, dynamic mechanical analysis was carried out to evaluate the viscoelastic behavior of the cross-linked epoxy/ABS blends. Finally, apparent weight fractions of epoxy and ABS components in epoxy- and ABS-rich phases were evaluated from T-g analysis.
Polymer-modified bicontinuous microemulsions used as a template for the formation of nanorods
(2009)
This article is focused on the characterization of the poly(ethylene glycol) (PEG)-induced bicontinuous microemulsion of the pseudo-ternary system sodium dodecylsulfate (SDS)/xylene-pentanol/water by means of differential scanning calorimetry, rheology, and conductometry. The influence of the polymer concentration (cp) and the molecular weight (Mw) on the microstructure of the microemulsion was investigated using Cryo scanning electron microscopy. It was found that an increase of cp influences the structure of the sponge-like phase significantly. These polymer-modified microemulsions can be used as a template phase for the formation of BaSO4 nanorods, where individual nanoparticles (5nm in size) are ordered along the polymer backbone.
We have performed a 50 ns of molecular dynamics study of poly(diallyldimethylammonium chloride) (PDADMAC)/ sodium dodecyl sulfate (SDS)/decanol/water systems. The influence of the cationic polyelectrolyte on the anionic SDS- based lamellar liquid crystalline system was investigated. The main structural parameters have been calculated and compared with experimental data. We obtain two types of PDADMAC conformation, a more folded structure A and a structure B where the PDADMAC molecule is adsorbed at the anionic head groups of the surfactant molecules. The polyelectrolyte- induced coexistence of two lamellar phases at a concentration of 2-3% of PDADMAC is observed, which is in agreement with experimental findings.
This work is focused on the influence of an ionic liquid (IL), i.e. ethyl-methylimidazolium hexylsulfate, on the spontaneous formation of microemulsions with ionic surfactants. The influence of the ionic liquid on Structure formation in the optically clear phase region in water/toluene/pentanol mixtures in presence of the cationic surfactant CTAB was studied in more detail. The results show a significant increase of the transparent phase region by adding the ionic liquid. Conductometric investigations demonstrate that adding the ionic liquid can drastically reduce the droplet- droplet interactions in the L-2 phase. H-1 nuclear magnetic resonance (H-1 NMR) diffusion coefficient measurements in combination with dynamic light scattering measurements clearly show that inverse microemulsion droplets still exist, but the droplet size is decreased to 2 nm. A more detailed characterisation of the isotropic phase channel by means of conductivity measurements, dynamic light scattering (DLS), H-1 NMR and cryo-scanning electron microscopy (SEM), allows the identification of a bicontinuous sponge phase between the L-1 and L-2 phase. When the poly(ethyleneimine) is added, the isotropic phase range is reduced drastically, but the inverse microemulsion range still exists.