Refine
Year of publication
- 2018 (32) (remove)
Document Type
- Doctoral Thesis (32) (remove)
Is part of the Bibliography
- yes (32)
Keywords
- Magnetismus (3)
- magnetism (3)
- Bakterien (2)
- Ferroelektrika (2)
- bacteria (2)
- ferroelectrics (2)
- mode stability (2)
- Antarctica (1)
- Antarktis (1)
- Astronomie (1)
Institute
- Institut für Physik und Astronomie (32) (remove)
Die Klangeigenschaften von Musikinstrumenten werden durch das Zusammenwirken der auf ihnen anregbaren akustischen Schwingungsmoden bestimmt, welche sich wiederum aus der geometrischen Struktur des Resonators in Kombination mit den verwendeten Materialien ergeben. In dieser Arbeit wurde das Schwingungsverhalten von Streichinstrumenten durch den Einsatz minimal-invasiver piezoelektrischer Polymerfilmsensoren untersucht. Die studierten Kopplungsphänomene umfassen den sogenannten Wolfton und Schwingungstilger, die zu dessen Abschwächung verwendet werden, sowie die gegenseitige Beeinflussung von Bogen und Instrument beim Spielvorgang. An Dielektrischen Elastomeraktormembranen wurde dagegen der Einfluss der elastischen Eigenschaften des Membranmaterials auf das akustische und elektromechanische Schwingungsverhalten gezeigt. Die Dissertation gliedert sich in drei Teile, deren wesentliche Ergebnisse im Folgenden zusammengefasst werden.
In Teil I wurde die Funktionsweise eines abstimmbaren Schwingungstilgers zur Dämpfung von Wolftönen auf Streichinstrumenten untersucht. Durch Abstimmung der Resonanzfrequenz des Schwingungstilgers auf die Wolftonfrequenz kann ein Teil der Saitenschwingungen absorbiert werden, so dass die zu starke Anregung der Korpusresonanz vermieden wird, die den Wolfton verursacht. Der Schwingungstilger besteht aus einem „Wolftöter“, einem Massestück, welches auf der Nachlänge der betroffenen Saite (zwischen Steg und Saitenhalter) installiert wird. Hier wurde gezeigt, wie die Resonanzen dieses Schwingungstilgers von der Masse des Wolftöters und von dessen Position auf der Nachlänge abhängen. Aber auch die Geometrie des Wolftöters stellte sich als ausschlaggebend heraus, insbesondere bei einem nicht-rotationssymmetrischen Wolftöter: In diesem Fall entsteht – basierend auf den zu erwartenden nicht-harmonischen Moden einer massebelasteten Saite – eine zusätzliche Mode, die von der Polarisationsrichtung der Saitenschwingung abhängt.
Teil II der Dissertation befasst sich mit Elastomermembranen, die als Basis von Dielektrischen Elastomeraktoren dienen, und die wegen der Membranspannung auch akustische Resonanzen aufweisen. Die Ansprache von Elastomeraktoren hängt unter anderem von der Geschwindigkeit der elektrischen Anregung ab. Die damit zusammenhängenden viskoelastischen Eigenschaften der hier verwendeten Elastomere, Silikon und Acrylat, wurden einerseits in einer frequenzabhängigen dynamisch-mechanischen Analyse des Elastomers erfasst, andererseits auch optisch an vollständigen Aktoren selbst gemessen. Die höhere Viskosität des Acrylats, das bei tieferen Frequenzen höhere Aktuationsdehnungen als das Silikon zeigt, führt zu einer Verminderung der Dehnungen bei höheren Frequenzen, so dass über etwa 40 Hertz mit Silikon größere Aktuationsdehnungen erreicht werden. Mit den untersuchten Aktoren konnte die Gitterkonstante weicher optischer Beugungsgitter kontrolliert werden, die als zusätzlicher Film auf der Membran installiert wurden. Über eine Messung der akustischen Resonanzfrequenz von Elastomermebranen aus Acrylat in 1Abhängigkeit von ihrer Vorstreckung konnte in Verbindung mit einer Modellierung des hyperelastischen Verhaltens des Elastomers (Ogden-Modell) der Schermodul bestimmt werden.
Schließlich wird in Teil III die Untersuchung von Geigen und ihrer Streichanregung mit Hilfe minimal-invasiver piezoelektrischer Polymerfilme geschildert. Es konnten am Bogen und am Steg von Geigen – unter den beiden Füßen des Stegs – jeweils zwei Filmsensoren installiert werden. Mit den beiden Sensoren am Steg wurden Frequenzgänge von Geigen gemessen, welche eine Bestimmung der frequenzabhängigen Stegbewegung erlaubten. Diese Methode ermöglicht damit auch eine umfassende Charakterisierung der Signaturmoden in Bezug auf die Stegdynamik. Die Ergebnisse der komplementären Methoden von Impulsanregung und natürlichem Spielen der Geigen konnten dank der Sensoren verglichen werden. Für die Nutzung der Sensoren am Bogen – insbesondere für eine Messung des Bogendrucks – wurde eine Kalibrierung des Bogen-Sensor-Systems mit Hilfe einer Materialprüfmaschine durchgeführt. Bei einer Messung während des natürlichen Spielens wurde mit den Sensoren am Bogen einerseits die Übertragung der Saitenschwingung auf den Bogen festgestellt. Dabei konnten außerdem longitudinale Bogenhaarresonanzen identifiziert werden, die von der Position der Saite auf dem Bogen abhängen. Aus der Analyse dieses Phänomens konnte die longitudinale Wellengeschwindigkeit der Bogenhaare bestimmt werden, die eine wichtige Größe für die Kopplung zwischen Saite und Bogen ist. Mit Hilfe des Systems aus Sensoren an Bogen und Steg werden auf Grundlage der vorliegenden Arbeit Studien an Streichinstrumenten vorgeschlagen, in denen die Bespielbarkeit der Instrumente zu den jeweils angeregten Steg- und Bogenschwingungen in Beziehung gesetzt werden kann. Damit könnte nicht zuletzt auch die bisher nicht vollständig geklärte Rolle des Bogens für Klang und Bespielbarkeit besser beurteilt werden
In this thesis we provide a construction of the operator framework starting from the functional formulation of group field theory (GFT). We define operator algebras on Hilbert spaces whose expectation values in specific states provide correlation functions of the functional formulation. Our construction allows us to give a direct relation between the ingredients of the functional GFT and its operator formulation in a perturbative regime. Using this construction we provide an example of GFT states that can not be formulated as states in a Fock space and lead to math- ematically inequivalent representations of the operator algebra. We show that such inequivalent representations can be grouped together by their symmetry properties and sometimes break the left translation symmetry of the GFT action. We interpret these groups of inequivalent representations as phases of GFT, similar to the classification of phases that we use in QFT’s on space-time.
In this thesis, we treat the extreme Newman-Penrose components of both the Maxwell field (s=±1) and the linearized gravitational perturbations (or "linearized gravity" for short) (s=±2) in the exterior of a slowly rotating Kerr black hole. Upon different rescalings, we can obtain spin s components which satisfy the separable Teukolsky master equation (TME). For each of these spin s components defined in Kinnersley tetrad, the resulting equations by performing some first-order differential operator on it once and twice (twice only for s=±2), together with the TME, are in the form of an "inhomogeneous spin-weighted wave equation" (ISWWE) with different potentials and constitute a linear spin-weighted wave system. We then prove energy and integrated local energy decay (Morawetz) estimates for this type of ISWWE, and utilize them to achieve both a uniform bound of a positive definite energy and a Morawetz estimate for the regular extreme Newman-Penrose components defined in the regular Hawking-Hartle tetrad.
We also present some brief discussions on mode stability for TME for the case of real frequencies. This says that in a fixed subextremal Kerr spacetime, there is no nontrivial separated mode solutions to TME which are purely ingoing at horizon and purely outgoing at infinity. This yields a representation formula for solutions to inhomogeneous Teukolsky equations, and will play a crucial role in generalizing the above energy and Morawetz estimates results to the full subextremal Kerr case.
Microswimmers, i.e. swimmers of micron size experiencing low Reynolds numbers, have received a great deal of attention in the last years, since many applications are envisioned in medicine and bioremediation. A promising field is the one of magnetic swimmers, since magnetism is biocom-patible and could be used to direct or actuate the swimmers. This thesis studies two examples of magnetic microswimmers from a physics point of view.
The first system to be studied are magnetic cells, which can be magnetic biohybrids (a swimming cell coupled with a magnetic synthetic component) or magnetotactic bacteria (naturally occurring bacteria that produce an intracellular chain of magnetic crystals). A magnetic cell can passively interact with external magnetic fields, which can be used for direction. The aim of the thesis is to understand how magnetic cells couple this magnetic interaction to their swimming strategies, mainly how they combine it with chemotaxis (the ability to sense external gradient of chemical species and to bias their walk on these gradients). In particular, one open question addresses the advantage given by these magnetic interactions for the magnetotactic bacteria in a natural environment, such as porous sediments. In the thesis, a modified Active Brownian Particle model is used to perform simulations and to reproduce experimental data for different systems such as bacteria swimming in the bulk, in a capillary or in confined geometries. I will show that magnetic fields speed up chemotaxis under special conditions, depending on parameters such as their swimming strategy (run-and-tumble or run-and-reverse), aerotactic strategy (axial or polar), and magnetic fields (intensities and orientations), but it can also hinder bacterial chemotaxis depending on the system.
The second example of magnetic microswimmer are rigid magnetic propellers such as helices or random-shaped propellers. These propellers are actuated and directed by an external rotating magnetic field. One open question is how shape and magnetic properties influence the propeller behavior; the goal of this research field is to design the best propeller for a given situation. The aim of the thesis is to propose a simulation method to reproduce the behavior of experimentally-realized propellers and to determine their magnetic properties. The hydrodynamic simulations are based on the use of the mobility matrix. As main result, I propose a method to match the experimental data, while showing that not only shape but also the magnetic properties influence the propellers swimming characteristics.
Poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) ferroelectric thin films of different molar ratio have been studied with regard to data memory applications. Therefore, films with thicknesses of 200 nm and less have been spin coated from solution. Observations gained from single layers have been extended to multilayer capacitors and three terminal transistor devices.
Besides conventional hysteresis measurements, the measurement of dielectric non-linearities has been used as a main tool of characterisation. Being a very sensitive and non-destructive method, non-linearity measurements are well suited for polarisation readout and property studies. Samples have been excited using a high quality, single-frequency sinusoidal voltage with an amplitude significantly smaller than the coercive field of the samples. The response was then measured at the excitation frequency and its higher harmonics. Using the measurement results, the linear and non-linear dielectric permittivities ɛ₁, ɛ₂ and ɛ₃ have been determined. The permittivities have been used to derive the temperature-dependent polarisation behaviour as well as the polarisation state and the order of the phase transitions.
The coercive field in VDF-TrFE copolymers is high if compared to their ceramic competitors. Therefore, the film thickness had to be reduced significantly. Considering a switching voltage of 5 V and a coercive field of 50 MV/m, the film thickness has to be 100 nm and below. If the thickness becomes substantially smaller than the other dimensions, surface and interface layer effects become more pronounced. For thicker films of P(VDF-TrFE) with a molar fraction of 56/44 a second-order phase transition without a thermal hysteresis for an ɛ₁(T) temperature cycle has been predicted and observed. This however, could not be confirmed by the measurements of thinner films. A shift of transition temperatures as well as a temperature independent, non-switchable polarisation and a thermal hysteresis for P(VDF-TrFE) 56/44 have been observed. The impact of static electric fields on the polarisation and the phase transition has therefore been studied and simulated, showing that all aforementioned phenomena including a linear temperature dependence of the polarisation might originate from intrinsic electric fields.
In further experiments the knowledge gained from single layer capacitors has been extended to bilayer copolymer thin films of different molar composition. Bilayers have been deposited by succeeding cycles of spin coating from solution. Single layers and their bilayer combination have been studied individually in order to prove the layers stability. The individual layers have been found to be physically stable. But while the bilayers reproduced the main ɛ₁(T) properties of the single layers qualitatively, quantitative numbers could not be explained by a simple serial connection of capacitors. Furthermore, a linear behaviour of the polarisation throughout the measured temperature range has been observed. This was found to match the behaviour predicted considering a constant electric field.
Retention time is an important quantity for memory applications. Hence, the retention behaviour of VDF-TrFE copolymer thin films has been determined using dielectric non-linearities. The polarisation loss in P(VDF-TrFE) poled samples has been found to be less than 20% if recorded over several days. The loss increases significantly if the samples have been poled with lower amplitudes, causing an unsaturated polarisation. The main loss was attributed to injected charges. Additionally, measurements of dielectric non-linearities have been proven to be a sensitive and non-destructive tool to measure the retention behaviour.
Finally, a ferroelectric field effect transistor using mainly organic materials (FerrOFET) has been successfully studied. DiNaphtho[2,3-b:2',3'-f]Thieno[3,2-b]Thiophene (DNTT) has proven to be a stable, suitable organic semiconductor to build up ferroelectric memory devices. Furthermore, an oxidised aluminium bottom electrode and additional dielectric layers, i.e. parylene C, have proven to reduce the leakage current and therefore enhance the performance significantly.
The Sun is the nearest star to the Earth. It consists of an interior and an atmosphere. The convection zone is the outermost layer of the solar interior. A flux rope may emerge as a coherent structure from the convection zone into the solar atmosphere or be formed by magnetic reconnection in the atmosphere. A flux rope is a bundle of magnetic field lines twisting around an axis field line, creating a helical shape by which dense filament material can be supported against gravity. The flux rope is also considered as the key structure of the most energetic phenomena in the solar system, such as coronal mass ejections (CMEs) and flares. These magnetic flux ropes can produce severe geomagnetic storms. In particular, to improve the ability to forecast space weather, it is important to enrich our knowledge about the dynamic formation of flux ropes and the underlying physical mechanisms that initiate their eruption, such as a CME.
A confined eruption consists of a filament eruption and usually an associated are, but does not evolve into a CME; rather, the moving plasma is halted in the solar corona and usually seen to fall back. The first detailed observations of a confined filament eruption were obtained on 2002 May 27by the TRACE satellite in the 195 A band. So, in the Chapter 3, we focus on a flux rope instability model. A twisted flux rope can become unstable by entering the kink instability regime. We show that the kink instability, which occurs if the twist of a flux rope exceeds a critical value, is capable of initiating of an eruption. This model is tested against the well observed confined eruption on 2002 May 27 in a parametric magnetohydrodynamic (MHD) simulation study that comprises all phases of the event. Very good agreement with the essential observed properties is obtained, only except for a relatively poor matching of the initial filament height.
Therefore, in Chapter 4, we submerge the center point of the flux rope deeper below the photosphere to obtain a flatter coronal rope section and a better matching with the initial height profile of the erupting filament. This implies a more realistic inclusion of the photospheric line tying. All basic assumptions and the other parameter settings are kept the same as in Chapter 3. This complement of the parametric study shows that the flux rope instability model can yield an even better match with the observational data. We also focus in Chapters 3 and 4 on the magnetic reconnection during the confined eruption, demonstrating that it occurs in two distinct locations and phases that correspond to the observed brightenings and changes of topology, and consider the fate of the erupting flux, which can reform a (less twisted) flux rope.
The Sun also produces series of homologous eruptions, i.e. eruptions which occur repetitively in the same active region and are of similar morphology. Therefore, in Chapter 5, we employ the reformed flux rope as a new initial condition, to investigate the possibility of subsequent homologous eruptions. Free magnetic energy is built up by imposing motions in the bottom boundary, such as converging motions, leading to flux cancellation. We apply converging motions in the sunspot area, such that a small part of the flux from the sunspots with different polarities is transported toward the polarity inversion line (PIL) and cancels with each other. The reconnection associated with the cancellation process forms more helical magnetic flux around the reformed flux rope, which leads to a second and a third eruption. In this study, we obtain the first MHD simulation results of a homologous sequence of eruptions that show a transition from a confined to two ejective eruptions, based on the reformation of a flux rope after each eruption.
Eta Carinae
(2018)
The exceptional binary star Eta Carinae has been fascinating scientists and the people in the Southern hemisphere alike for hundreds of years. It survived an enormous outbreak, comparable to a supernova energy-wise, and for a short period became the brightest star of the night sky. From observations from the radio regime to X-rays the system's characteristics and its emission in photon energies up to ~ 50 keV are well studied today. The binary is composed of two massive stars of ~ 30 and ~ 100 solar masses. Either star drives a strong stellar wind that continuously carries away a fraction of its mass. The collision of these winds leads to a shock on each side of the encounter. In the wind-wind-collision region plasma gets heated when it is overrun by the shocks. Part of the emission seen in X-rays can be attributed to this plasma. Above ~ 50 keV the emission is no longer of thermal origin: the required plasma temperature exceeds the available mechanical energy input of the stellar winds. In contrast to its observational history in thermal energies observational evidence of Eta Carinae's non-thermal emission has only recently built up. In high-energy gamma-rays Eta Carinae is the only binary of its kind that has been detected unambiguously. Its energy spectrum reaches up to ~ hundred GeV, a regime where satellite-based gamma-ray experiments run out of statistics. Ground-based gamma-ray experiments have the advantage of large photon collection areas. H.E.S.S. is the only gamma-ray experiment located in the Southern hemisphere and thus able to observe Eta Carinae in this energy range. H.E.S.S. measures gamma-rays via electromagnetic showers of particles that very-high-energy gamma-rays initiate in the atmosphere. The main challenge in observations of Eta Carinae with H.E.S.S. is the UV emission of the Carina nebula that leads to a background that is up to 10 times stronger than usual for H.E.S.S. This thesis presents the first detection of a colliding-wind binary in very-high-energy gamma-rays and documents the studies that led to it. The differential gamma-ray energy spectrum of Eta Carinae is measured up to 700 GeV. A hadronic and leptonic origin of the gamma-ray emission is discussed and based on the comparison of cooling times a hadronic scenario is favoured.
The topic of this thesis is the experimental investigation of evaporating thin films on planar solid substrates and the enrichment, the crystal growth and Marangoni flows near the three phase line in the case of partially wetting mixtures of volatile and non volatile liquids. In short, it deals with the properties of planar liquid films and with those of thin liquid sections near the three phase contact line. In both cases the liquid looses continuously one component by evaporation. One topic is the rupture behavior of ultra-thin films of binary mixtures of a volatile solvent and a nonvolatile solute. It is studied how the thickness at which the film ruptures is related to the solute crystallization at the liquid/ substrate interface as soon as the solute reaches supersaturation. A universal relation between the rupture thickness and the saturation behaviour is presented. The second research subject are individual nanoparticles embedded in molecularly thin films at planar substrates. It is found that the nanoparticles cause an unexpectedly large film surface distortion (meniscus). This distortion can be measured quantitatively by conventional reflective microscopy although the nanoparticles are much smaller than the Rayleigh diffraction limit. Investigations with binary mixtures of volatile solvents and non-volatile solutes (polymers) aim at a better understanding/prediction of the final solute coverage, the timeresolved film thinning, the time-resolved solvent evaporation, and the evolution of the solute concentration within the thinning film. A quantiative theoretical description of the experimental findings is derived. Experiments of completely miscible binary mixtures of volatile liquids, which individually form continuous planar films show unexpectedly that films of mixtures are not necessarily continuous and planar. Rather, they may form surface
undulations or even rupture. This is explained with surface Marangoni flows. A new method for the exceptionally fast fabrication (mm/min) of ultralong aligned diphenylalanin single crystals via dip casting is presented. It is shown how the specific evaporation conditions at the three phase line can be used for a controlled peptide crystal growth process. It is further demonstrated how the confinement inside a smalll capillary affects the peptide crystallization and how this can be understood (and used).
Climate change affects societies across the globe in various ways. In addition to gradual changes in temperature and other climatic variables, global warming is likely to increase intensity and frequency of extreme weather events.
Beyond biophysical impacts, these also directly affect societal and economic activity. Additionally, indirect effects can occur; spatially, economic losses can spread along global supply-chains; temporally, climate impacts can change the economic development trajectory of countries.
This thesis first examines how climate change alters river flood risk and its local socio-economic implications. Then, it studies the global economic response to river floods in particular, and to climate change in general.
Changes in high-end river flood risk are calculated for the next three decades on a global scale with high spatial resolution. In order to account for uncertainties, this assessment makes use of an ensemble of climate and hydrological models as well as a river routing model, that is found to perform well regarding peak river discharge. The results show an increase in high-end flood risk in many parts of the world, which require profound adaptation efforts. This pressure to adapt is measured as the enhancement in protection level necessary to stay at historical high-end risk. In developing countries as well as in industrialized regions, a high pressure to adapt is observed - the former to increase low protection levels, the latter to maintain the low risk levels perceived in the past.
Further in this thesis, the global agent-based dynamic supply-chain model acclimate is developed. It models the cascading of indirect losses in the global supply network. As an anomaly model its agents - firms and consumers - maximize their profit locally to respond optimally to local perturbations. Incorporating quantities as well as prices on a daily basis, it is suitable to dynamically resolve the impacts of unanticipated climate extremes.
The model is further complemented by a static measure, which captures the inter-dependencies between sectors across regions that are only connected indirectly. These higher-order dependencies are shown to be important for a comprehensive assessment of loss-propagation and overall costs of local disasters.
In order to study the economic response to river floods, the acclimate model is driven by flood simulations. Within the next two decades, the increase in direct losses can only partially be compensated by market adjustments, and total losses are projected to increase by 17% without further adaptation efforts. The US and the EU are both shown to receive indirect losses from China, which is strongly affected directly. However, recent trends in the trade relations leave the EU in a better position to compensate for these losses.
Finally, this thesis takes a broader perspective when determining the investment response to the climate change damages employing the integrated assessment model DICE. On an optimal economic development path, the increase in damages is anticipated as emissions and consequently temperatures increase. This leads to a significant devaluation of investment returns and the income losses from climate damages almost double.
Overall, the results highlight the need to adapt to extreme weather events - local physical adaptation measures have to be combined with regional and global policy measures to prepare the global supply-chain network to climate change.