Filtern
Erscheinungsjahr
Dokumenttyp
- Wissenschaftlicher Artikel (11)
- Dissertation (8)
- Postprint (3)
- Rezension (1)
Gehört zur Bibliographie
- ja (23)
Schlagworte
- azobenzene (23) (entfernen)
The strong adhesion of sub-micron sized particles to surfaces is a nuisance, both for removing contaminating colloids from surfaces and for conscious manipulation of particles to create and test novel micro/nano-scale assemblies. The obvious idea of using detergents to ease these processes suffers from a lack of control: the action of any conventional surface-modifying agent is immediate and global. With photosensitive azobenzene containing surfactants we overcome these limitations. Such photo-soaps contain optical switches (azobenzene molecules), which upon illumination with light of appropriate wavelength undergo reversible trans-cis photo-isomerization resulting in a subsequent change of the physico-chemical molecular properties. In this work we show that when a spatial gradient in the composition of trans- and cis- isomers is created near a solid-liquid interface, a substantial hydrodynamic flow can be initiated, the spatial extent of which can be set, e.g., by the shape of a laser spot. We propose the concept of light induced diffusioosmosis driving the flow, which can remove, gather or pattern a particle assembly at a solid-liquid interface. In other words, in addition to providing a soap we implement selectivity: particles are mobilized and moved at the time of illumination, and only across the illuminated area.
Ein neuentwickeltes azobenzenhaltiges Material, das auf einem supramolekularen Konzept basiert, wird bezüglich seiner Strukturbildung während einer holografischen Belichtung bei 488 nm untersucht. Im Mittelpunkt stehen dabei eindimensionale, sinusförmige Reliefs mit Periodizitäten kleiner 500 nm. Es wird gezeigt, wie der Grad der Vernetzung der photosensitiven Schicht die Strukturbildung in diesem Größenbereich beeinflusst. Zur Maximierung der Strukturtiefe werden gezielt Prozessparameter der Belichtung sowie Materialparameter variiert. Unter Standardbedingungen und moderaten Belichtungsintensitäten von ca. 200 mW/cm² bilden sich innerhalb weniger Minuten bei einer Periode von 400 nm Strukturtiefen von bis zu 80nm aus. Durch die Beeinflussung von Materialparametern, wie Oberflächenspannung und Viskosität, wird die maximale Strukturtiefe auf 160nm verdoppelt. Durch Mehrfachbelichtungen wird auch die Bildung von zweidimensionalen Gittern untersucht. Die Originalstrukturen werden in einem Abformverfahren kopiert und in Schichten von unter UV-Licht aushärtenden Polymeren übertragen. Durch das Abformen kommt es zu einer geringfügigen Verschlechterung der Oberflächenqualität sowie Abnahme der Strukturtiefe. Dieser Verlust wird durch eine Verringerung der Prozesstemperatur verringert. Mithilfe kopierter Oberflächengitter werden organische Distributed Feedback-(DFB)-Laser zweiter Ordnung hergestellt, um den Einfluss von Gitterparametern auf die Emissionseigenschaften dieser Laser zu untersuchen. Dazu erfolgt zunächst die Charakterisierung der optischen Verstärkungseigenschaften ausgewählter organischer Emittermaterialien mittels der Variablen Strichlängenmethode. Das mit dem Laserfarbstoff Pyrromthen567 (PM567) dotierte Polystyrol (PS) zeigt dabei trotz konzentrationsbedingter geringer Absorption eine vergleichsweise geringe Gewinnschwelle von 50µJ/cm² bei ca. 575 nm. Das aktive Gast-Wirt-System der konjugierten Polymere MEH-PPV und F8BT* weist eine hohe Absorption und eine kleine Gewinnschwelle von 2,5 µJ/cm² bei 630 nm auf. Dieses Verhalten spiegelt sich auch in den Emissionseigenschaften der damit hergestellten DFB-Laser wieder. Die Dicke der aktiven Schichten liegen im Bereich hunderter Nanometer und wird so eingestellt, dass sich nur die transversalen Grundmoden im Wellenleiter ausbreiten können. Die Gitterperiode sind so gewählt, dass ein Lichtmode im Verstärkungsbereich des Emittermaterials liegt. Die Emissionslinien der Laser sind mit FWHM-Werten von bis zu 0,3 nm spektral sehr schmalbandig und weisen auf eine sehr gute Gitterqualität hin. Die Untersuchungen liefern minimale Laserschwellen und maximale differentielle Effizienzen von 4,0µJ/cm² und 8,4% für MEH-PPV in F8BT* (bei ca. 640nm) sowie 80 µJ/cm² und 0,9% für PM567 in PS (bei ca. 575 nm). Die Vergrößerung der Strukturtiefe von 40nm auf 80nm in mit MEH-PPV dotierten F8BT*-Lasern zu einem deutlichen Anstieg der ausgekoppelten Energie sowie der differentiellen Effizienz und einem geringen Absinken der Laserschwelle. Dies ist ein Resultat der erhöhten Kopplung von Lasermode und Gitter. Die Emission von DFB-Lasern mit zweidimensionalen Oberflächengittern zeigen eine Verringerung der Divergenz aber kein Einfluss auf die Laserschwelle. Abschließend erfolgt eine Vermessung der Photostabilität von DFB-Lasern unter verschiedenen Bedingungen. Das Einbringen eines konjugierten Polymers in eine aktive Matrix sowie der Betrieb in einer Stickstoffatmosphäre führen dabei zu einer Erhöhung der Lebensdauer auf über eine Million Pulse. Durch die Kombination von Oberflächengittern in PDMS-Filmen mit elektroaktiven Substraten wird eine elektrisch steuerbare Deformation des Beugungsgitters erreicht und auf einen DFB-Laser übertragen. Die spannungsinduzierte Verformung wird zunächst in Beugungsexperimenten charakterisiert und ein optimaler Arbeitspunkt bestimmt. Mit den beiden Elastomeren SEBS12 und VHB4910 werden in den Gittern maximale Periodenänderungen von 1,3% bzw. 3,4% bei einer Steuerspannung von 2 kV erreicht. Der Unterschied resultiert aus den verschiedenen Elastizitätsmoduln der Materialien. Übertragen auf DFB-Laser resultiert eine Variation der Gitterperiode senkrecht zu den Gitterlinien in einer kontinuierlichen Verschiebung der Emissionswellenlänge. Mit einem Spannungssignal von 3,25 kV wird die schmalbandige Emission eines elastischen DFB-Lasers kontinuierlich um fast 50nm von 604 nm zu 557 nm hin verschoben. Aus dem Deformationsverhalten sowohl der reinen Beugungsgitter als auch der Laser werden Rückschlüsse auf die Elastizität der verwendeten Materialien gezogen und erlauben Verbesserungen der Bauteile.
Azobenzene-containing molecules may associate with each other in systems such as self-assembled monolayers or micelles. The interaction between azobenzene units leads to a formation of exciton states in these molecular assemblies. Apart from local excitations of monomers, the electronic transitions to the exciton states may involve charge transfer excitations. Here, we perform quantum chemical calculations and apply transition density matrix analysis to quantify local and charge transfer contributions to the lowest electronic transitions in azobenzene dimers of various arrangements. We find that the transitions to the lowest exciton states of the considered dimers are dominated by local excitations, but charge transfer contributions become sizable for some of the lowest pi pi* electronic transitions in stacked and slip-stacked dimers at short intermolecular distances. In addition, we assess different ways to partition the transition density matrix between fragments. In particular, we find that the inclusion of the atomic orbital overlap has a pronounced effect on quantifying charge transfer contributions if a large basis set is used.
This dissertation focuses on the understanding of the optical manipulation of microgels dispersed in aqueous solution of azobenzene containing surfactant. The work consists of three parts where each part is a systematic investigation of the (1) photo-isomerization kinetics of the surfactant in complex with the microgel polymer matrix, (2) light driven diffusiosmosis (LDDO) in microgels and (3) photo-responsivity of microgel on complexation with spiropyran.
The first part comprises three publications where the first one [P1] investigates the photo-isomerization kinetics and corresponding isomer composition at a photo-stationary state of the photo-sensitive surfactant conjugated with charged polymers or micro sized polymer networks to understand the structural response of such photo-sensitive complexes. We report that the photo-isomerization of the azobenzene-containing cationic surfactant is slower in a polymer complex compared to being purely dissolved in an aqueous solution. The surfactant aggregates near the polyelectrolyte chains at concentrations much lower than the bulk critical micelle concentration. This, along with the inhibition of the photo-isomerization kinetics due to steric hindrance within the densely packed aggregates, pushes the isomer-ratio to a higher trans-isomer concentration for all irradiation wavelengths.
The second publication [P2] combines experimental results and non-adiabatic dynamic simulations for the same surfactant molecules embedded in the micelles with absorption spectroscopy measurements of micellar solutions to uncover the reasons responsible for the slowdown in photo induced trans → cis azobenzene isomerization at concentrations higher than the critical micelle concentration (CMC). The simulations reveal a decrease of isomerization quantum yields for molecules inside the micelles and observes a reduction of extinction coefficients upon micellization. These findings explain the deceleration of the trans → cis switching in micelles of the azobenzene-containing surfactants.
Finally, the third publication [P3] focusses on the kinetics of adsorption and desorption of the same surfactant within anionic microgels in the dark and under continuous irradiation. Experimental data demonstrate, that microgels can serve as a selective absorber of the trans isomers. The interaction of the isomers with the gel matrix induces a remotely controllable collapse or swelling on appropriate irradiation wavelengths. Measuring the kinetics of the microgel size response and knowing the exact isomer composition under light exposure, we calculate the adsorption rate of the trans-isomers.
The second part comprises two publications. The first publication [P4] reports on the phenomenon of light-driven diffusioosmotic (DO) long-range attractive and repulsive interactions between micro-sized objects, whose range extends several times the size of microparticles and can be adjusted to point towards or away from the particle by varying irradiation parameters such as intensity or wavelength of light. The phenomenon is fueled by the aforementioned photosensitive surfactant. The complex interaction of dynamic exchange of isomers and photo-isomerization rate yields to relative concentrations gradients of the isomers in the vicinity of micro-sized object inducing a local diffusioosmotic (DO) flow thereby making a surface act as a micropump.
The second publication [P5] exclusively aims the visualization and investigation of the DO flows generated from microgels by using small tracer particles. Similar to micro sized objects, the flow is able to push adjacent tracers over distances several times larger than microgel size. Here we report that the direction and the strength of the l-LDDO depends on the intensity, irradiation wavelength and the amount of surfactant adsorbed by the microgel. For example, the flow pattern around a microgel is directed radially outward and can be maintained quasi-indefinitely under exposure at 455 nm when the trans:cis ratio is 2:1, whereas irradiation at 365 nm, generates a radially transient flow pattern, which inverts at lower intensities.
Lastly, the third part consists of one publication [P6] which, unlike the previous works, reports on the study of the kinetics of photo- and thermo-switching of a new surfactant namely, spiropyran, upon exposure with light of different wavelengths and its interaction with p(NIPAM-AA) microgels. The surfactant being an amphiphile, switches between its ring closed spiropyran (SP) form and ring open merocyanine (MC) form which results in a change in the hydrophilic–hydrophobic balance of the surfactant as MC being a zwitterionic form along with the charged head group, generates three charges on the molecule. Therefore, the MC form of the surfactant is more hydrophilic than in the case of the neutral SP state. Here, we investigate the initial shrinkage of the gel particles via charge compensation on first exposure to SP molecules which results from the complex formation of the molecules with the gel matrix, triggering them to become photo responsive. The size and VPTT of the microgels during irradiation is shown to be a combination of heating up of the solution during light absorption by the surfactant (more pronounced in the case of UV irradiation) and the change in the hydrophobicity of the surfactant.
Photo-Isomerization Kinetics of Azobenzene Containing Surfactant Conjugated with Polyelectrolyte
(2020)
Ionic complexation of azobenzene-containing surfactants with any type of oppositely charged soft objects allows for making them photo-responsive in terms of their size, shape and surface energy. Investigation of the photo-isomerization kinetic and isomer composition at a photo-stationary state of the photo-sensitive surfactant conjugated with charged objects is a necessary prerequisite for understanding the structural response of photo-sensitive complexes. Here, we report on photo-isomerization kinetics of a photo-sensitive surfactant in the presence of poly(acrylic acid, sodium salt). We show that the photo-isomerization of the azobenzene-containing cationic surfactant is slower in a polymer complex compared to being purely dissolved in aqueous solution. In a photo-stationary state, the ratio between the trans and cis isomers is shifted to a higher trans-isomer concentration for all irradiation wavelengths. This is explained by the formation of surfactant aggregates near the polyelectrolyte chains at concentrations much lower than the bulk critical micelle concentration and inhibition of the photo-isomerization kinetics due to steric hindrance within the densely packed aggregates.
Photo-Isomerization Kinetics of Azobenzene Containing Surfactant Conjugated with Polyelectrolyte
(2020)
Ionic complexation of azobenzene-containing surfactants with any type of oppositely charged soft objects allows for making them photo-responsive in terms of their size, shape and surface energy. Investigation of the photo-isomerization kinetic and isomer composition at a photo-stationary state of the photo-sensitive surfactant conjugated with charged objects is a necessary prerequisite for understanding the structural response of photo-sensitive complexes. Here, we report on photo-isomerization kinetics of a photo-sensitive surfactant in the presence of poly(acrylic acid, sodium salt). We show that the photo-isomerization of the azobenzene-containing cationic surfactant is slower in a polymer complex compared to being purely dissolved in aqueous solution. In a photo-stationary state, the ratio between the trans and cis isomers is shifted to a higher trans-isomer concentration for all irradiation wavelengths. This is explained by the formation of surfactant aggregates near the polyelectrolyte chains at concentrations much lower than the bulk critical micelle concentration and inhibition of the photo-isomerization kinetics due to steric hindrance within the densely packed aggregates.
Photosensitive azobenzene-containing surfactants have attracted great attention in past years because they offer a means to control soft-matter transformations with light. At concentrations higher than the critical micelle concentration (CMC), the surfactant molecules aggregate and form micelles, which leads to a slowdown of the photoinduced trans -> cis azobenzene isomerization. Here, we combine nonadiabatic dynamics simulations for the surfactant molecules embedded in the micelles with absorption spectroscopy measurements of micellar solutions to uncover the reasons responsible for the reaction slowdown. Our simulations reveal a decrease of isomerization quantum yields for molecules inside the micelles. We also observe a reduction of extinction coefficients upon micellization. These findings explain the deceleration of the trans -> cis switching in micelles of the azobenzene-containing surfactants.
Azo-modified photosensitive polymers offer the interesting possibility to reshape bulk polymers and thin films by UV-irradiation while being in the solid glassy state. The polymer undergoes considerable mass transport under irradiation with a light interference pattern resulting in the formation of surface relief grating (SRG). The forces inscribing this SRG pattern into a thin film are hard to assess experimentally directly. In the current study, we are proposing a method to probe opto-mechanical stresses within polymer films by characterizing the mechanical response of thin metal films (10 nm) deposited on the photosensitive polymer. During irradiation, the metal film not only deforms along with the SRG formation but ruptures in a regular and complex manner. The morphology of the cracks differs strongly depending on the electrical field distribution in the interference pattern, even when the magnitude and the kinetics of the strain are kept constant. This implies a complex local distribution of the opto-mechanical stress along the topography grating. In addition, the neutron reflectivity measurements of the metal/polymer interface indicate the penetration of a metal layer within the polymer, resulting in a formation of a bonding layer that confirms the transduction of light-induced stresses in the polymer layer to a metal film.
This cumulative doctoral dissertation, based on three publications, is devoted to the investigation of several aspects of azobenzene molecular switches, with the aid of computational chemistry.
In the first paper, the isomerization rates of a thermal cis → trans isomerization of azobenzenes for species formed upon an integer electron transfer, i.e., with added or removed electron, are calculated from Eyring’s transition state theory and activation energy barriers, computed by means of density functional theory. The obtained results are discussed in connection with an experimental study of the thermal cis → trans isomerization of azobenzene derivatives in the presence of gold nanoparticles, which is demonstrated to be greatly accelerated in comparison to the same isomerization reaction in the absence of nanoparticles.
The second paper is concerned with electronically excited states of (i) dimers, composed of two photoswitchable units placed closely side-by-side, as well as (ii) monomers and dimers adsorbed on a silicon cluster. A variety of quantum chemistry methods, capable of calculating molecular electronic absorption spectra, based on density functional and wave function theories, is employed to quantify changes in optical absorption upon dimerization and covalent grafting to a surface. Specifically, the exciton (Davydov) splitting between states of interest is determined from first-principles calculations with the help of natural transition orbital analysis, allowing for insight into the nature of excited states.
In the third paper, nonadiabatic molecular dynamics with trajectory surface hopping is applied to model the photoisomerization of azobenzene dimers, (i) for the isolated case (exhibiting the exciton coupling between two molecules) as well as (ii) for the constrained case (providing the van der Waals interaction with environment in addition to the exciton coupling between two monomers). For the latter, the additional azobenzene molecules, surrounding the dimer, are introduced, mimicking a densely packed self-assembled monolayer. From obtained results it is concluded that the isolated dimer is capable of isomerization likewise the monomer, whereas the steric hindrance considerably suppresses trans → cis photoisomerization.
Furthermore, the present dissertation comprises the general introduction describing the main features of the azobenzene photoswitch and objectives of this work, theoretical basis of the employed methods, and discussion of gained findings in the light of existing literature. Also, additional results on (i) activation parameters of the thermal cis → trans isomerization of azobenzenes, (ii) an approximate scheme to account for anharmonicity of molecular vibrations in calculation of the activation entropy, as well as (iii) absorption spectra of photoswitch–silicon composites obtained from time-demanding wave function-based methods are presented.
Molecular photoswitches are attracting much attention lately mostly because of their possible applications in nano technology, and their role in biology. One of the widely studied representatives of photochromic molecules is azobenzene (AB). With light, by a static electric field, or with tunneling electrons this specie can be "switched" from the flat and energetically more stable trans form, into the compact cis form. The back reaction can be induced optically or thermally. Quantum chemical calculations, mostly based on density functional theory, on the AB molecule, AB derivatives and related systems are presented. All the calculations were done for isolated species, however, with implications for latest experimental results aiming at the switching of surface mounted ABs. In some of these experiments, it is assumed that the switching process is substrate mediated, by attaching an electron or a hole to the adsorbate forming short-lived anion or cation resonances. Therefore, we calculated also cationic and anionic ABs in this work. An influence of external electric fields on the potential energy surfaces, was also studied. Further, by the type, number and positioning of various substituent groups, systematic changes on activation energies and rates for the thermal cis-to-trans isomerization can be enforced. The nature of the transition state for ground state isomerization was investigated. Applying Eyring's transition state theory, trends in activation energies and rates were predicted and are, where a comparison was possible, in good agreement with experimental data. Further, thermal isomerization was studied in solution, for which a polarizable continuum model was employed. The influence of substitution and an environment leaves its traces on structural properties of molecules and quantitative appearance of calculated UV/Vis spectra, as well. Finally, an explicit treatment of a solid substrate was demonstrated for the conformational switching, by scanning tunneling microscope, of a 1,5-cyclooctadiene (COD) molecule at a Si(001) surface, treated by a cluster model. At first, we studied energetics and potential energy surfaces along relevant switching coordinates by quantum chemical calculations, followed by the switching dynamics using wave packet methods. We show that, in spite the simplicity of the model, our calculations support the switching of adsorbed COD, by inelastic electron tunneling at low temperatures.