Refine
Has Fulltext
- yes (6)
Document Type
- Doctoral Thesis (4)
- Habilitation Thesis (2)
Is part of the Bibliography
- yes (6) (remove)
Keywords
- Oberfläche (6) (remove)
Institute
Condensation and crystallization are omnipresent phenomena in nature. The formation of droplets or crystals on a solid surface are familiar processes which, beyond their scientific interest, are required in many technological applications. In recent years, experimental techniques have been developed which allow patterning a substrate with surface domains of molecular thickness, surface area in the mesoscopic scale, and different wettabilities (i.e., different degrees of preference for a substance that is in contact with the substrate). The existence of new patterned surfaces has led to increased theoretical efforts to understand wetting phenomena in such systems.
In this thesis, we deal with some problems related to the equilibrium of phases (e.g., liquid-vapor coexistence) and the kinetics of phase separation in the presence of chemically patterned surfaces. Two different cases are considered: (i) patterned surfaces in contact with liquid and vapor, and (ii) patterned surfaces in contact with a crystalline phase. One of the problems that we have studied is the following: It is widely believed that if air containing water vapor is cooled to its dew point, droplets of water are immediately formed. Although common experience seems to support this view, it is not correct. It is only when air is cooled well below its dew point that the phase transition occurs immediately. A vapor cooled slightly below its dew point is in a metastable state, meaning that the liquid phase is more stable than the vapor, but the formation of droplets requires some time to occur, which can be very long.
It was first pointed out by J. W. Gibbs that the metastability of a vapor depends on the energy necessary to form a nucleus (a droplet of a critical size). Droplets smaller than the critical size will tend to disappear, while droplets larger than the critical size will tend to grow. This is consistent with an energy barrier that has its maximum at the critical size, as is the case for droplets formed directly in the vapor or in contact with a chemically uniform planar wall. Classical nucleation theory describes the time evolution of the condensation in terms of the random process of droplet growth through this energy barrier. This process is activated by thermal fluctuations, which eventually will form a droplet of the critical size.
We consider nucleation of droplets from a vapor on a substrate patterned with easily wettable (lyophilic) circular domains. Under certain conditions of pressure and temperature, the condensation of a droplet on a lyophilic circular domain proceeds through a barrier with two maxima (a double barrier). We have extended classical nucleation theory to account for the kinetics of nucleation through a double barrier, and applied this extension to nucleation on lyophilic circular domains.
Proteine sind an praktisch allen Prozessen in lebenden Zellen maßgeblich beteiligt. Auch in der Biotechnologie werden Proteine in vielfältiger Weise eingesetzt.
Ein Protein besteht aus einer Kette von Aminosäuren. Häufig lagern sich mehrere dieser Ketten zu größeren Strukturen und Funktionseinheiten, sogenannten Proteinkomplexen,
zusammen. Kürzlich wurde gezeigt, dass eine Proteinkomplexbildung bereits während der Biosynthese der Proteine (co-translational) stattfinden kann
und nicht stets erst danach (post-translational) erfolgt. Da Fehlassemblierungen von Proteinen zu Funktionsverlusten und adversen Effekten führen, ist eine präzise und verlässliche Proteinkomplexbildung sowohl für zelluläre Prozesse als auch für biotechnologische Anwendungen essenziell. Mit experimentellen Methoden lassen sich zwar u.a. die Stöchiometrie und die Struktur von Proteinkomplexen bestimmen,
jedoch bisher nicht die Dynamik der Komplexbildung auf unterschiedlichen Zeitskalen. Daher sind grundlegende Mechanismen der Proteinkomplexbildung noch nicht vollständig verstanden. Die hier vorgestellte, auf experimentellen Erkenntnissen aufbauende, computergestützte Modellierung der Proteinkomplexbildung erlaubt eine umfassende Analyse des Einflusses physikalisch-chemischer Parameter
auf den Assemblierungsprozess. Die Modelle bilden möglichst realistisch die experimentellen Systeme der Kooperationspartner (Bar-Ziv, Weizmann-Institut, Israel; Bukau und Kramer, Universität Heidelberg) ab, um damit die Assemblierung von Proteinkomplexen einerseits in einem quasi-zweidimensionalen synthetischen Expressionssystem (in vitro) und andererseits im Bakterium Escherichia coli (in vivo) untersuchen zu können. Mit Hilfe eines vereinfachten Expressionssystems, in dem die Proteine nur an die Chip-Oberfläche, aber nicht aneinander binden können, wird das theoretische Modell parametrisiert. In diesem vereinfachten in-vitro-System durchläuft die Effizienz der Komplexbildung drei Regime – ein bindedominiertes Regime, ein Mischregime und ein produktionsdominiertes Regime. Ihr Maximum erreicht die Effizienz dabei kurz nach dem Übergang vom bindedominierten ins Mischregime und fällt anschließend monoton ab. Sowohl im nicht-vereinfachten in-vitro- als auch im in-vivo-System koexistieren je zwei konkurrierende Assemblierungspfade: Im in-vitro-System erfolgt die Komplexbildung entweder spontan in wässriger Lösung (Lösungsassemblierung) oder aber in einer definierten Schrittfolge an der Chip-Oberfläche (Oberflächenassemblierung); Im in-vivo-System konkurrieren hingegen die co- und die post-translationale Komplexbildung. Es zeigt sich, dass die Dominanz der Assemblierungspfade im in-vitro-System zeitabhängig ist und u.a. durch die Limitierung und Stärke der Bindestellen auf der Chip-Oberfläche beeinflusst werden kann. Im in-vivo-System hat der räumliche Abstand zwischen den Syntheseorten der beiden Proteinkomponenten nur dann einen Einfluss auf die Komplexbildung, wenn die Untereinheiten schnell degradieren. In diesem Fall dominiert die co-translationale Assemblierung auch auf kurzen Zeitskalen deutlich, wohingegen es bei stabilen Untereinheiten zu einem Wechsel von der Dominanz der post- hin zu einer geringen Dominanz der co-translationalen Assemblierung kommt. Mit den in-silico-Modellen lässt sich neben der Dynamik u.a. auch die Lokalisierung der Komplexbildung und -bindung darstellen, was einen Vergleich der theoretischen Vorhersagen mit experimentellen Daten und somit eine Validierung der Modelle ermöglicht. Der hier präsentierte in-silico Ansatz ergänzt die experimentellen Methoden, und erlaubt so, deren Ergebnisse zu interpretieren und neue Erkenntnisse davon abzuleiten.
Light-driven diffusioosmosis
(2018)
The emergence of microfluidics created the need for precise and remote control of micron-sized objects. I demonstrate how light-sensitive motion can be induced at the micrometer scale by a simple addition of a photosensitive surfactant, which makes it possible to trigger hydrophobicity with light. With point-like laser irradiation, radial inward and outward hydrodynamic surface flows are remotely switched on and off. In this way, ensembles of microparticles can be moved toward or away from the irradiation center. Particle motion is analyzed according to varying parameters, such as surfactant and salt concentration, illumination condition, surface hydrophobicity, and surface structure.
The physical origin of this process is the so-called light-driven diffusioosmosis (LDDO), a phenomenon that was discovered in the framework of this thesis and is described experimentally and theoretically in this work. To give a brief explanation, a focused light irradiation induces a local photoisomerization that creates a concentration gradient at the solid-liquid interface. To compensate for the change in osmotic pressure near the surface, a hydrodynamic flow along the surface is generated. Surface-surfactant interaction largely governs LDDO. It is shown that surfactant adsorption depends on the isomerization state of the surfactant. Photoisomerization, therefore, triggers a surfactant attachment or detachment from the surface. This change is considered to be one of the reasons for the formation of LDDO flow.
These flows are introduced not only by a focused laser source but also by global irradiation. Porous particles show reversible repulsive and attractive interactions when dispersed in the solution of photosensitive surfactant. Repulsion and attraction is controlled by the irradiation wavelength. Illumination with red light leads to formation of aggregates, while illumination with blue light leads to the formation of a well-separated grid with equal interparticle distances, between 2µm and 80µm, depending on the particle surface density. These long-range interactions are considered to be a result of an increase or decrease of surfactant concentration around each particle, depending on the irradiation wavelength. Surfactant molecules adsorb inside the pores of the particles. A light-induced photoisomerization changes adsorption to the pores and drives surfactant molecules to the outside. The concentration gradients generate symmetric flows around each single particle resulting in local LDDO. With a break of the symmetry (i.e., by closing one side of the particle with a metal cap), one can achieve active self-propelled particle motion.
This study presents the development of 1D and 2D Surface Evolution Codes (SECs) and their coupling to any lithospheric-scale (thermo-)mechanical code with a quadrilateral structured surface mesh.
Both SECs involve diffusion as approach for hillslope processes and the stream power law to reflect riverbed incision. The 1D SEC settles sediment that was produced by fluvial incision in the appropriate minimum, while the supply-limited 2D SEC DANSER uses a fast filling algorithm to model sedimantation. It is based on a cellular automaton. A slope-dependent factor in the sediment flux extends the diffusion equation to nonlinear diffusion. The discharge accumulation is achieved with the D8-algorithm and an improved drainage accumulation routine. Lateral incision enhances the incision's modelling. Following empirical laws, it incises channels of several cells width.
The coupling method enables different temporal and spatial resolutions of the SEC and the thermo-mechanical code. It transfers vertical as well as horizontal displacements to the surface model. A weighted smoothing of the 3D surface displacements is implemented. The smoothed displacement vectors transmit the deformation by bilinear interpolation to the surface model. These interpolation methods ensure mass conservation in both directions and prevent the two surfaces from drifting apart.
The presented applications refer to the evolution of the Pamir orogen. A calibration of DANSER's parameters with geomorphological data and a DEM as initial topography highlights the advantage of lateral incision. Preserving the channel width and reflecting incision peaks in narrow channels, this closes the huge gap between current orogen-scale incision models and observed topographies.
River capturing models in a system of fault-bounded block rotations reaffirm the importance of the lateral incision routine for capturing events with channel initiation. The models show a low probability of river capturings with large deflection angles. While the probability of river capturing is directly depending on the uplift rate, the erodibility inside of a dip-slip fault speeds up headward erosion along the fault: The model's capturing speed increases within a fault.
Coupling DANSER with the thermo-mechanical code SLIM 3D emphasizes the versatility of the SEC. While DANSER has minor influence on the lithospheric evolution of an indenter model, the brittle surface deformation is strongly affected by its sedimentation, widening a basin in between two forming orogens and also the southern part of the southern orogen to south, east and west.
It has been known for several years that under certain conditions electrons can be confined within thin layers even if these layers consist of metal and are supported by a metal substrate. In photoelectron spectra, these layers show characteristic discrete energy levels and it has turned out that these lead to large effects like the oscillatory magnetic coupling technically exploited in modern hard disk reading heads. The current work asks in how far the concepts underlying quantization in two-dimensional films can be transferred to lower dimensionality. This problem is approached by a stepwise transition from two-dimensional layers to one-dimensional nanostructures. On the one hand, these nanostructures are represented by terraces on atomically stepped surfaces, on the other hand by atom chains which are deposited onto these terraces up to complete coverage by atomically thin nanostripes. Furthermore, self organization effects are used in order to arrive at perfectly one-dimensional atomic arrangements at surfaces. Angle-resolved photoemission is particularly suited as method of investigation because is reveals the behavior of the electrons in these nanostructures in dependence of the spacial direction which distinguishes it from, e. g., scanning tunneling microscopy. With this method intense and at times surprisingly large effects of one-dimensional quantization are observed for various exemplary systems, partly for the first time. The essential role of bandgaps in the substrate known from two-dimensional systems is confirmed for nanostructures. In addition, we reveal an ambiguity without precedent in two-dimensional layers between spacial confinement of electrons on the one side and superlattice effects on the other side as well as between effects caused by the sample and by the measurement process. The latter effects are huge and can dominate the photoelectron spectra. Finally, the effects of reduced dimensionality are studied in particular for the d electrons of manganese which are additionally affected by strong correlation effects. Surprising results are also obtained here. ---------------------------- Die Links zur jeweiligen Source der im Appendix beigefügten Veröffentlichungen befinden sich auf Seite 83 des Volltextes.
We theoretically discuss the interaction of neutral particles (atoms, molecules) with surfaces in the regime where it is mediated by the electromagnetic field. A thorough characterization of the field at sub-wavelength distances is worked out, including energy density spectra and coherence functions. The results are applied to typical situations in integrated atom optics, where ultracold atoms are coupled to a thermal surface, and to single molecule probes in near field optics, where sub-wavelength resolution can be achieved.