Refine
Year of publication
Document Type
- Doctoral Thesis (780) (remove)
Keywords
- Synchronisation (17)
- Klimawandel (11)
- Nichtlineare Dynamik (10)
- synchronization (10)
- climate change (9)
- data analysis (9)
- Datenanalyse (8)
- Spektroskopie (8)
- Synchronization (8)
- Arktis (7)
Institute
- Institut für Physik und Astronomie (780) (remove)
In the present thesis I investigate the lattice dynamics of thin film hetero structures of magnetically ordered materials upon femtosecond laser excitation as a probing and manipulation scheme for the spin system. The quantitative assessment of laser induced thermal dynamics as well as generated picosecond acoustic pulses and their respective impact on the magnetization dynamics of thin films is a challenging endeavor. All the more, the development and implementation of effective experimental tools and comprehensive models are paramount to propel future academic and technological progress.
In all experiments in the scope of this cumulative dissertation, I examine the crystal lattice of nanoscale thin films upon the excitation with femtosecond laser pulses. The relative change of the lattice constant due to thermal expansion or picosecond strain pulses is directly monitored by an ultrafast X-ray diffraction (UXRD) setup with a femtosecond laser-driven plasma X-ray source (PXS). Phonons and spins alike exert stress on the lattice, which responds according to the elastic properties of the material, rendering the lattice a versatile sensor for all sorts of ultrafast interactions. On the one hand, I investigate materials with strong magneto-elastic properties; The highly magnetostrictive rare-earth compound TbFe2, elemental Dysprosium or the technological relevant Invar material FePt. On the other hand I conduct a comprehensive study on the lattice dynamics of Bi1Y2Fe5O12 (Bi:YIG), which exhibits high-frequency coherent spin dynamics upon femtosecond laser excitation according to the literature. Higher order standing spinwaves (SSWs) are triggered by coherent and incoherent motion of atoms, in other words phonons, which I quantified with UXRD. We are able to unite the experimental observations of the lattice and magnetization dynamics qualitatively and quantitatively. This is done with a combination of multi-temperature, elastic, magneto-elastic, anisotropy and micro-magnetic modeling.
The collective data from UXRD, to probe the lattice, and time-resolved magneto-optical Kerr effect (tr-MOKE) measurements, to monitor the magnetization, were previously collected at different experimental setups. To improve the precision of the quantitative assessment of lattice and magnetization dynamics alike, our group implemented a combination of UXRD and tr-MOKE in a singular experimental setup, which is to my knowledge, the first of its kind. I helped with the conception and commissioning of this novel experimental station, which allows the simultaneous observation of lattice and magnetization dynamics on an ultrafast timescale under identical excitation conditions. Furthermore, I developed a new X-ray diffraction measurement routine which significantly reduces the measurement time of UXRD experiments by up to an order of magnitude. It is called reciprocal space slicing (RSS) and utilizes an area detector to monitor the angular motion of X-ray diffraction peaks, which is associated with lattice constant changes, without a time-consuming scan of the diffraction angles with the goniometer. RSS is particularly useful for ultrafast diffraction experiments, since measurement time at large scale facilities like synchrotrons and free electron lasers is a scarce and expensive resource. However, RSS is not limited to ultrafast experiments and can even be extended to other diffraction techniques with neutrons or electrons.
The mammalian brain is, with its numerous neural elements and structured complex connectivity, one of the most complex systems in nature. Recently, large-scale corticocortical connectivities, both structural and functional, have received a great deal of research attention, especially using the approach of complex networks. Here, we try to shed some light on the relationship between structural and functional connectivities by studying synchronization dynamics in a realistic anatomical network of cat cortical connectivity. We model the cortical areas by a subnetwork of interacting excitable neurons (multilevel model) and by a neural mass model (population model). With weak couplings, the multilevel model displays biologically plausible dynamics and the synchronization patterns reveal a hierarchical cluster organization in the network structure. We can identify a group of brain areas involved in multifunctional tasks by comparing the dynamical clusters to the topological communities of the network. With strong couplings of multilevel model and by using neural mass model, the dynamics are characterized by well-defined oscillations. The synchronization patterns are mainly determined by the node intensity (total input strengths of a node); the detailed network topology is of secondary importance. The biologically improved multilevel model exhibits similar dynamical patterns in the two regimes. Thus, the study of synchronization in a multilevel complex network model of cortex can provide insights into the relationship between network topology and functional organization of complex brain networks.
The recent discovery of an intricate and nontrivial interaction topology among the elements of a wide range of natural systems has altered the manner we understand complexity. For example, the axonal fibres transmitting electrical information between cortical regions form a network which is neither regular nor completely random. Their structure seems to follow functional principles to balance between segregation (functional specialisation) and integration. Cortical regions are clustered into modules specialised in processing different kinds of information, e.g. visual or auditory. However, in order to generate a global perception of the real world, the brain needs to integrate the distinct types of information. Where this integration happens, nobody knows. We have performed an extensive and detailed graph theoretical analysis of the cortico-cortical organisation in the brain of cats, trying to relate the individual and collective topological properties of the cortical areas to their function. We conclude that the cortex possesses a very rich communication structure, composed of a mixture of parallel and serial processing paths capable of accommodating dynamical processes with a wide variety of time scales. The communication paths between the sensory systems are not random, but largely mediated by a small set of areas. Far from acting as mere transmitters of information, these central areas are densely connected to each other, strongly indicating their functional role as integrators of the multisensory information. In the quest of uncovering the structure-function relationship of cortical networks, the peculiarities of this network have led us to continuously reconsider the stablished graph measures. For example, a normalised formalism to identify the “functional roles” of vertices in networks with community structure is proposed. The tools developed for this purpose open the door to novel community detection techniques which may also characterise the overlap between modules. The concept of integration has been revisited and adapted to the necessities of the network under study. Additionally, analytical and numerical methods have been introduced to facilitate understanding of the complicated statistical interrelations between the distinct network measures. These methods are helpful to construct new significance tests which may help to discriminate the relevant properties of real networks from side-effects of the evolutionary-growth processes.
In this work the first observation of new type of liquid crystals is presented. This is ionic self-assembly (ISA) liquid crystals formed by introduction of oppositely charged ions between different low molecular tectonic units. As practically all conventional liquid crystals consist of rigid core and alkyl chains the attention is focused to the simplest case where oppositely charged ions are placed between a rigid core and alkyl tails. The aim of this work is to investigate and understand liquid crystalline and alignment properties of these materials. It was found that ionic interactions within complexes play the main role. Presence of these interactions restricts transition to isotropic phase. In addition, these interactions hold the system (like network) allowing crystallization into a single domain from aligned LC state. Alignment of these simple ISA complexes was spontaneous on a glass substrate. In order to show potentials for application perylenediimide and azobenzene containing ISA complexes have been investigated for correlations between phase behavior and their alignment properties. The best results of macroscopic alignment of perylenediimide-based ISA complexes have been obtained by zone-casting method. In the aligned films the columns of the complex align perpendicular to the phase-transition front. The obtained anisotropy (DR = 18) is thermally stable. The investigated photosensitive (azobenzene-based) ISA complexes show formation of columnar LC phases. It was demonstrated that photo alignment of such complexes was very effective (DR = 50 has been obtained). It was shown that photo-reorientation in the photosensitive ISA complexes is cooperative process. The size of domains has direct influence on efficiency of the photo-reorientation process. In the case of small domains the photo-alignment is the most effective. Under irradiation with linearly polarized light domains reorient in the plane of the film leading to macroscopic alignment of columns parallel to the light polarization and joining of small domains into big ones. Finally, the additional distinguishable properties of the ISA liquid crystalline complexes should be noted: (I) the complexes do not solve in water but readily solve in organic solvents; (II) the complexes have good film-forming properties when cast or spin-coated from organic solvent; (III) alignment of the complexes depends on their structure and secondary interactions between tectonic units.
Optical frequency combs (OFC) constitute an array of phase-correlated equidistant spectral lines with nearly equal intensities over a broad spectral range. The adaptations of combs generated in mode-locked lasers proved to be highly efficient for the calibration of high-resolution (resolving power > 50000) astronomical spectrographs. The observation of different galaxy structures or the studies of the Milky Way are done using instruments in the low- and medium resolution range. To such instruments belong, for instance, the Multi Unit Spectroscopic Explorer (MUSE) being developed for the Very Large Telescope (VLT) of the European Southern Observatory (ESO) and the 4-metre Multi-Object Spectroscopic Telescope (4MOST) being in development for the ESO VISTA 4.1 m Telescope. The existing adaptations of OFC from mode-locked lasers are not resolvable by these instruments.
Within this work, a fibre-based approach for generation of OFC specifically in the low- and medium resolution range is studied numerically. This approach consists of three optical fibres that are fed by two equally intense continuous-wave (CW) lasers. The first fibre is a conventional single-mode fibre, the second one is a suitably pumped amplifying Erbium-doped fibre with anomalous dispersion, and the third one is a low-dispersion highly nonlinear optical fibre. The evolution of a frequency comb in this system is governed by the following processes: as the two initial CW-laser waves with different frequencies propagate through the first fibre, they generate an initial comb via a cascade of four-wave mixing processes. The frequency components of the comb are phase-correlated with the original laser lines and have a frequency spacing that is equal to the initial laser frequency separation (LFS), i.e. the difference in the laser frequencies. In the time domain, a train of pre-compressed pulses with widths of a few pico-seconds arises out of the initial bichromatic deeply-modulated cosine-wave. These pulses undergo strong compression in the subsequent amplifying Erbium-doped fibre: sub-100 fs pulses with broad OFC spectra are formed. In the following low-dispersion highly nonlinear fibre, the OFC experience a further broadening and the intensity of the comb lines are fairly equalised. This approach was mathematically modelled by means of a Generalised Nonlinear Schrödinger Equation (GNLS) that contains terms describing the nonlinear optical Kerr effect, the delayed Raman response, the pulse self-steepening, and the linear optical losses as well as the wavelength-dependent Erbium gain profile for the second fibre. The initial condition equation being a deeply-modulated cosine-wave mimics the radiation of the two initial CW lasers. The numerical studies are performed with the help of Matlab scripts that were specifically developed for the integration of the GNLS and the initial condition according to the proposed approach for the OFC generation. The scripts are based on the Fourth-Order Runge-Kutta in the Interaction Picture Method (RK4IP) in combination with the local error method.
This work includes the studies and results on the length optimisation of the first and the second fibre depending on different values of the group-velocity dispersion of the first fibre. Such length optimisation studies are necessary because the OFC have the biggest possible broadband and exhibit a low level of noise exactly at the optimum lengths. Further, the optical pulse build-up in the first and the second fibre was studied by means of the numerical technique called Soliton Radiation Beat Analysis (SRBA). It was shown that a common soliton crystal state is formed in the first fibre for low laser input powers. The soliton crystal continuously dissolves into separated optical solitons as the input power increases. The pulse formation in the second fibre is critically dependent on the features of the pulses formed in the first fibre. I showed that, for low input powers, an adiabatic soliton compression delivering low-noise OFC occurs in the second fibre. At high input powers, the pulses in the first fibre have more complicated structures which leads to the pulse break-up in the second fibre with a subsequent degradation of the OFC noise performance. The pulse intensity noise studies that were performed within the framework of this thesis allow making statements about the noise performance of an OFC. They showed that the intensity noise of the whole system decreases with the increasing value of LFS.
The Milky Way is a spiral galaxy consisting of a disc of gas, dust and stars embedded in a halo of dark matter. Within this dark matter halo there is also a diffuse population of stars called the stellar halo, that has been accreting stars for billions of years from smaller galaxies that get pulled in and disrupted by the large gravitational potential of the Milky Way. As they are disrupted, these galaxies leave behind long streams of stars that can take billions of years to mix with the rest of the stars in the halo. Furthermore, the amount of heavy elements (metallicity) of the stars in these galaxies reflects the rate of chemical enrichment that occurred in them, since the Universe has been slowly enriched in heavy elements (e.g. iron) through successive generations of stars which produce them in their cores and supernovae explosions. Therefore, stars that contain small amounts of heavy elements (metal-poor stars) either formed at early times before the Universe was significantly enriched, or in isolated environments. The aim of this thesis is to develop a better understanding of the substructure content and chemistry of the Galactic stellar halo, in order to gain further insight into the formation and evolution of the Milky Way.
The Pristine survey uses a narrow-band filter which specifically targets the Ca II H & K spectral absorption lines to provide photometric metallicities for a large number of stars down to the extremely metal-poor (EMP) regime, making it a very powerful data set for Galactic archaeology studies. In Chapter 2, we quantify the efficiency of the survey using a preliminary spectroscopic follow-up sample of ~ 200 stars. We also use this sample to establish a set of selection criteria to improve the success rate of selecting EMP candidates for follow-up spectroscopy. In Chapter 3, we extend this work and present the full catalogue of ~ 1000 stars from a three year long medium resolution spectroscopic follow-up effort conducted as part of the Pristine survey. From this sample, we compute success rates of 56% and 23% for recovering stars with [Fe/H] < -2.5 and [Fe/H] < -3.0, respectively. This demonstrates a high efficiency for finding EMP stars as compared to previous searches with success rates of 3-4%.
In Chapter 4, we select a sample of ~ 80000 halo stars using colour and magnitude cuts to select a main sequence turnoff population in the distance range 6 < dʘ < 20 kpc. We then use the spectroscopic follow-up sample presented in Chapter 3 to statistically rescale the Pristine photometric metallicities of this sample, and present the resulting corrected metallicity distribution function (MDF) of the halo. The slope at the metal-poor end is significantly shallower than previous spectroscopic efforts have shown, suggesting that there may be more metal-poor stars with [Fe/H] < -2.5 in the halo than previously thought. This sample also shows evidence that the MDF of the halo may not be bimodal as was proposed by previous works, and that the lack of globular clusters in the Milky Way may be the result of a physical truncation of the MDF rather than just statistical under-sampling.
Chapter 5 showcases the unexpected capability of the Pristine filter for separating blue horizontal branch (BHB) stars from Blue Straggler (BS) stars. We demonstrate a purity of 93% and completeness of 91% for identifying BHB stars, a substantial improvement over previous works. We then use this highly pure and complete sample of BHB stars to trace the halo density profile out to d > 100 kpc, and the Sagittarius stream substructure out to ~ 130 kpc.
In Chapter 6 we use the photometric metallicities from the Pristine survey to perform a clustering analysis of the halo as a function of metallicity. Separating the Pristine sample into four metallicity bins of [Fe/H] < -2, -2 < [Fe/H] < -1.5, -1.5 < [Fe/H] < -1 and -0.9 < [Fe/H] < -0.8, we compute the two-point correlation function to measure the amount of clustering on scales of < 5 deg. For a smooth comparison sample we make a mock Pristine data set generated using the Galaxia code based on the Besançon model of the Galaxy. We find enhanced clustering on small scales (< 0.5 deg) for some regions of the Galaxy for the most metal-poor bin ([Fe/H] < -2), while in others we see large scale signals that correspond to known substructures in those directions. This confirms that the substructure content of the halo is highly anisotropic and diverse in different Galactic environments. We discuss the difficulties of removing systematic clustering signals from the data and the limitations of disentangling weak clustering signals from real substructures and residual systematic structure in the data.
Taken together, the work presented in this thesis approaches the problem of better understanding the halo of our Galaxy from multiple angles. Firstly, presenting a sizeable sample of EMP stars and improving the selection efficiency of EMP stars for the Pristine survey, paving the way for the further discovery of metal-poor stars to be used as probes to early chemical evolution. Secondly, improving the selection of BHB distance tracers to map out the halo to large distances, and finally, using the large samples of metal-poor stars to derive the MDF of the inner halo and analyse the substructure content at different metallicities. The results of this thesis therefore expand our understanding of the physical and chemical properties of the Milky Way stellar halo, and provide insight into the processes involved in its formation and evolution.
CHAMP (CHAllenging Minisatellite Payload) is a German small satellite mission to study the earth's gravity field, magnetic field and upper atmosphere. Thanks to the good condition of the satellite so far, the planned 5 years mission is extended to year 2009. The satellite provides continuously a large quantity of measurement data for the purpose of Earth study. The measurements of the magnetic field are undertaken by two Fluxgate Magnetometers (vector magnetometer) and one Overhauser Magnetometer (scalar magnetometer) flown on CHAMP. In order to ensure the quality of the data during the whole mission, the calibration of the magnetometers has to be performed routinely in orbit. The scalar magnetometer serves as the magnetic reference and its readings are compared with the readings of the vector magnetometer. The readings of the vector magnetometer are corrected by the parameters that are derived from this comparison, which is called the scalar calibration. In the routine processing, these calibration parameters are updated every 15 days by means of scalar calibration. There are also magnetic effects coming from the satellite which disturb the measurements. Most of them have been characterized during tests before launch. Among them are the remanent magnetization of the spacecraft and fields generated by currents. They are all considered to be constant over the mission life. The 8 years of operation experience allow us to investigate the long-term behaviors of the magnetometers and the satellite systems. According to the investigation, it was found that for example the scale factors of the FGM show obvious long-term changes which can be described by logarithmic functions. The other parameters (offsets and angles between the three components) can be considered constant. If these continuous parameters are applied for the FGM data processing, the disagreement between the OVM and the FGM readings is limited to \pm1nT over the whole mission. This demonstrates, the magnetometers on CHAMP exhibit a very good stability. However, the daily correction of the parameter Z component offset of the FGM improves the agreement between the magnetometers markedly. The Z component offset plays a very important role for the data quality. It exhibits a linear relationship with the standard deviation of the disagreement between the OVM and the FGM readings. After Z offset correction, the errors are limited to \pm0.5nT (equivalent to a standard deviation of 0.2nT). We improved the corrections of the spacecraft field which are not taken into account in the routine processing. Such disturbance field, e.g. from the power supply system of the satellite, show some systematic errors in the FGM data and are misinterpreted in 9-parameter calibration, which brings false local time related variation of the calibration parameters. These corrections are made by applying a mathematical model to the measured currents. This non-linear model is derived from an inversion technique. If the disturbance field of the satellite body are fully corrected, the standard deviation of scalar error \triangle B remains about 0.1nT. Additionally, in order to keep the OVM readings a reliable standard, the imperfect coefficients of the torquer current correction for the OVM are redetermined by solving a minimization problem. The temporal variation of the spacecraft remanent field is investigated. It was found that the average magnetic moment of the magneto-torquers reflects well the moment of the satellite. This allows for a continuous correction of the spacecraft field. The reasons for the possible unknown systemic error are discussed in this thesis. Particularly, both temperature uncertainties and time errors have influence on the FGM data. Based on the results of this thesis the data processing of future magnetic missions can be designed in an improved way. In particular, the upcoming ESA mission Swarm can take advantage of our findings and provide all the auxiliary measurements needed for a proper recovery of the ambient magnetic field.
The aim of this thesis is to achieve a deep understanding of the working mechanism of polymer based solar cells and to improve the device performance. Two types of the polymer based solar cells are studied here: all-polymer solar cells comprising macromolecular donors and acceptors based on poly(p-phenylene vinylene) and hybrid cells comprising a PPV copolymer in combination with a novel small molecule electron acceptor. To understand the interplay between morphology and photovoltaic properties in all-polymer devices, I compared the photocurrent characteristics and excited state properties of bilayer and blend devices with different nano-morphology, which was fine tuned by using solvents with different boiling points. The main conclusion from these complementary measurements was that the performance-limiting step is the field-dependent generation of free charge carriers, while bimolecular recombination and charge extraction do not compromise device performance. These findings imply that the proper design of the donor-acceptor heterojunction is of major importance towards the goal of high photovoltaic efficiencies. Regarding polymer-small molecular hybrid solar cells I combined the hole-transporting polymer M3EH-PPV with a novel Vinazene-based electron acceptor. This molecule can be either deposited from solution or by thermal evaporation, allowing for a large variety of layer architectures to be realized. I then demonstrated that the layer architecture has a large influence on the photovoltaic properties. Solar cells with very high fill factors of up to 57 % and an open circuit voltage of 1V could be achieved by realizing a sharp and well-defined donor-acceptor heterojunction. In the past, fill factors exceeding 50 % have only been observed for polymers in combination with soluble fullerene-derivatives or nanocrystalline inorganic semiconductors as the electron-accepting component. The finding that proper processing of polymer-vinazene devices leads to similar high values is a major step towards the design of efficient polymer-based solar cells.