Refine
Year of publication
- 2006 (30) (remove)
Document Type
- Doctoral Thesis (30) (remove)
Keywords
- Nichtlineare Dynamik (3)
- Klimatologie (2)
- Monsun (2)
- Polyelektrolyt (2)
- Unsicherheitsanalyse (2)
- Zeitreihenanalyse (2)
- nonlinear dynamics (2)
- uncertainty analysis (2)
- Adhäsion (1)
- Agglomeration (1)
Institute
- Institut für Physik und Astronomie (30) (remove)
In this work the first observation of new type of liquid crystals is presented. This is ionic self-assembly (ISA) liquid crystals formed by introduction of oppositely charged ions between different low molecular tectonic units. As practically all conventional liquid crystals consist of rigid core and alkyl chains the attention is focused to the simplest case where oppositely charged ions are placed between a rigid core and alkyl tails. The aim of this work is to investigate and understand liquid crystalline and alignment properties of these materials. It was found that ionic interactions within complexes play the main role. Presence of these interactions restricts transition to isotropic phase. In addition, these interactions hold the system (like network) allowing crystallization into a single domain from aligned LC state. Alignment of these simple ISA complexes was spontaneous on a glass substrate. In order to show potentials for application perylenediimide and azobenzene containing ISA complexes have been investigated for correlations between phase behavior and their alignment properties. The best results of macroscopic alignment of perylenediimide-based ISA complexes have been obtained by zone-casting method. In the aligned films the columns of the complex align perpendicular to the phase-transition front. The obtained anisotropy (DR = 18) is thermally stable. The investigated photosensitive (azobenzene-based) ISA complexes show formation of columnar LC phases. It was demonstrated that photo alignment of such complexes was very effective (DR = 50 has been obtained). It was shown that photo-reorientation in the photosensitive ISA complexes is cooperative process. The size of domains has direct influence on efficiency of the photo-reorientation process. In the case of small domains the photo-alignment is the most effective. Under irradiation with linearly polarized light domains reorient in the plane of the film leading to macroscopic alignment of columns parallel to the light polarization and joining of small domains into big ones. Finally, the additional distinguishable properties of the ISA liquid crystalline complexes should be noted: (I) the complexes do not solve in water but readily solve in organic solvents; (II) the complexes have good film-forming properties when cast or spin-coated from organic solvent; (III) alignment of the complexes depends on their structure and secondary interactions between tectonic units.
Variationen der stratosphärischen Residualzirkulation und ihr Einfluss auf die Ozonverteilung
(2006)
Die Residualzirkulation entspricht der mittleren Massenzirkulation und beschreibt die im zonalen Mittel stattfindenden meridionalen Transportprozesse. Die Variationen der Residualzirkulation bestimmen gemeinsam mit dem anthropogen verursachten Ozonabbau die jährlichen Schwankungen der Ozongesamtsäule im arktischen Frühling. In der vorliegenden Arbeit wird die Geschwindigkeit des arktischen Astes der Residualzirkulation aus atmosphärischen Daten gewonnen. Zu diesem Zweck wird das diabatische Absinken im Polarwirbel mit Hilfe von Trajektorienrechnungen bestimmt. Die vertikalen Bewegungen der Luftpakete können mit vertikalen Windfeldern oder entsprechend einem neuen Ansatz mit diabatischen Heizraten angetrieben werden. Die Eingabedaten stammen aus dem 45 Jahre langen Reanalyse-Datensatz des "European Centre for Medium Range Weather Forecast" (ECMWF). Außerdem kann für die Jahre ab 1984 die operationelle ECMWF-Analyse verwendet werden. Die Qualität und Robustheit der Heizraten- und Trajektorienrechnungen werden durch Sensitivitätsstudien und Vergleiche mit anderen Modellen untermauert. Anschließend werden umfangreiche Trajektorienensemble statistisch ausgewertet, um ein detailliertes, zeit- und höhenaufgelöstes Bild des diabatischen Absinkens zu ermitteln. In diesem Zusammenhang werden zwei Methoden entwickelt, um das Absinken gemittelt im Polarwirbel oder als Funktion der äquivalenten Breite zu bestimmen. Es wird gezeigt, dass es notwendig ist den Lagrangeschen auf Trajektorienrechnungen basierenden Ansatz zu verfolgen, da die einfachen Eulerschen Mittel Abweichungen zu den Lagrangeschen Vertikalgeschwindigkeiten aufweisen. Das wirbelgemittelte Absinken wird für einzelne Winter mit dem beobachteten Absinken langlebiger Spurengase und anderen Modellstudien verglichen. Der Vergleich zeigt, dass das Absinken basierend auf den vertikalen Windfeldern der ECMWF-Datensätze den Nettoluftmassentransport durch die Residualzirkulation sehr stark überschätzt. Der neue Ansatz basierend auf den Heizraten ergibt hingegen realistische Ergebnisse und wird aus diesem Grund für alle Rechnungen verwendet. Es wird erstmalig eine Klimatologie des diabatischen Absinkens über einen fast fünf Jahrzehnte umfassenden Zeitraum erstellt. Die Klimatologie beinhaltet das vertikal und zeitlich aufgelöste diabatische Absinken gemittelt über den gesamten Polarwirbel und Informationen über die räumliche Struktur des vertikalen Absinkens. Die natürliche Jahr-zu-Jahr Variabilität des diabatischen Absinkens ist sehr stark ausgeprägt. Es wird gezeigt, dass zwischen der ECMWF-Zeitreihe des diabatischen Absinkens und der Zeitreihe aus einem unabhängig analysierten Temperaturdatensatz hohe Korrelationen bestehen. Erstmals wird der Einfluss von Transportprozessen auf die Ozongesamtsäule im arktischen Frühling direkt quantifiziert. Es wird gezeigt, dass die Jahr-zu-Jahr Variabilität der Ozongesamtsäule im arktischen Frühling zu gleichen Anteilen durch die Variabilität der dynamischen Komponente und durch die Variabilität der chemischen Komponente beeinflusst wird. Die gefundenen Variabilitäten von diabatischem Absinken und Ozoneintrag in hohen Breiten werden mit der vertikalen Ausbreitung planetarer Wellen aus der Troposphäre in die Stratosphäre in Beziehung gesetzt.
Kopplung von Polyelektrolyten und geladenen Lipid-Monoschichten an der Wasser / Luft-Grenzflächen
(2006)
Uncertainty about the sensitivity of the climate system to changes in the Earth’s radiative balance constitutes a primary source of uncertainty for climate projections. Given the continuous increase in atmospheric greenhouse gas concentrations, constraining the uncertainty range in such type of sensitivity is of vital importance. A common measure for expressing this key characteristic for climate models is the climate sensitivity, defined as the simulated change in global-mean equilibrium temperature resulting from a doubling of atmospheric CO2 concentration. The broad range of climate sensitivity estimates (1.5-4.5°C as given in the last Assessment Report of the Intergovernmental Panel on Climate Change, 2001), inferred from comprehensive climate models, illustrates that the strength of simulated feedback mechanisms varies strongly among different models. The central goal of this thesis is to constrain uncertainty in climate sensitivity. For this objective we first generate a large ensemble of model simulations, covering different feedback strengths, and then request their consistency with present-day observational data and proxy-data from the Last Glacial Maximum (LGM). Our analyses are based on an ensemble of fully-coupled simulations, that were realized with a climate model of intermediate complexity (CLIMBER-2). These model versions cover a broad range of different climate sensitivities, ranging from 1.3 to 5.5°C, and have been generated by simultaneously perturbing a set of 11 model parameters. The analysis of the simulated model feedbacks reveals that the spread in climate sensitivity results from different realizations of the feedback strengths in water vapour, clouds, lapse rate and albedo. The calculated spread in the sum of all feedbacks spans almost the entire plausible range inferred from a sampling of more complex models. We show that the requirement for consistency between simulated pre-industrial climate and a set of seven global-mean data constraints represents a comparatively weak test for model sensitivity (the data constrain climate sensitivity to 1.3-4.9°C). Analyses of the simulated latitudinal profile and of the seasonal cycle suggest that additional present-day data constraints, based on these characteristics, do not further constrain uncertainty in climate sensitivity. The novel approach presented in this thesis consists in systematically combining a large set of LGM simulations with data information from reconstructed regional glacial cooling. Irrespective of uncertainties in model parameters and feedback strengths, the set of our model versions reveals a close link between the simulated warming due to a doubling of CO2, and the cooling obtained for the LGM. Based on this close relationship between past and future temperature evolution, we define a method (based on linear regression) that allows us to estimate robust 5-95% quantiles for climate sensitivity. We thus constrain the range of climate sensitivity to 1.3-3.5°C using proxy-data from the LGM at low and high latitudes. Uncertainties in glacial radiative forcing enlarge this estimate to 1.2-4.3°C, whereas the assumption of large structural uncertainties may increase the upper limit by an additional degree. Using proxy-based data constraints for tropical and Antarctic cooling we show that very different absolute temperature changes in high and low latitudes all yield very similar estimates of climate sensitivity. On the whole, this thesis highlights that LGM proxy-data information can offer an effective means of constraining the uncertainty range in climate sensitivity and thus underlines the potential of paleo-climatic data to reduce uncertainty in future climate projections.
Stars are born in turbulent molecular clouds that fragment and collapse under the influence of their own gravity, forming a cluster of hundred or more stars. The star formation process is controlled by the interplay between supersonic turbulence and gravity. In this work, the properties of stellar clusters created by numerical simulations of gravoturbulent fragmentation are compared to those from observations. This includes the analysis of properties of individual protostars as well as statistical properties of the entire cluster. It is demonstrated that protostellar mass accretion is a highly dynamical and time-variant process. The peak accretion rate is reached shortly after the formation of the protostellar core. It is about one order of magnitude higher than the constant accretion rate predicted by the collapse of a classical singular isothermal sphere, in agreement with the observations. For a more reasonable comparison, the model accretion rates are converted to the observables bolometric temperature, bolometric luminosity, and envelope mass. The accretion rates from the simulations are used as input for an evolutionary scheme. The resulting distribution in the Tbol-Lbol-Menv parameter space is then compared to observational data by means of a 3D Kolmogorov-Smirnov test. The highest probability found that the distributions of model tracks and observational data points are drawn from the same population is 70%. The ratios of objects belonging to different evolutionary classes in observed star-forming clusters are compared to the temporal evolution of the gravoturbulent models in order to estimate the evolutionary stage of a cluster. While it is difficult to estimate absolute ages, the realtive numbers of young stars reveal the evolutionary status of a cluster with respect to other clusters. The sequence shows Serpens as the youngest and IC 348 as the most evolved of the investigated clusters. Finally the structures of young star clusters are investigated by applying different statistical methods like the normalised mean correlation length and the minimum spanning tree technique and by a newly defined measure for the cluster elongation. The clustering parameters of the model clusters correspond in many cases well to those from observed ones. The temporal evolution of the clustering parameters shows that the star cluster builds up from several subclusters and evolves to a more centrally concentrated cluster, while the cluster expands slower than new stars are formed.
The layer-by-layer assembly (LBL) of polyelectrolytes has been extensively studied for the preparation of ultrathin films due to the versatility of the build-up process. The control of the permeability of these layers is particularly important as there are potential drug delivery applications. Multilayered polyelectrolyte microcapsules are also of great interest due to their possible use as microcontainers. This work will present two methods that can be used as employable drug delivery systems, both of which can encapsulate an active molecule and tune the release properties of the active species. Poly-(N-isopropyl acrylamide), (PNIPAM) is known to be a thermo-sensitive polymer that has a Lower Critical Solution Temperature (LCST) around 32oC; above this temperature PNIPAM is insoluble in water and collapses. It is also known that with the addition of salt, the LCST decreases. This work shows Differential Scanning Calorimetry (DSC) and Confocal Laser Scanning Microscopy (CLSM) evidence that the LCST of the PNIPAM can be tuned with salt type and concentration. Microcapsules were used to encapsulate this thermo-sensitive polymer, resulting in a reversible and tunable stimuli- responsive system. The encapsulation of the PNIPAM inside of the capsule was proven with Raman spectroscopy, DSC (bulk LCST measurements), AFM (thickness change), SEM (morphology change) and CLSM (in situ LCST measurement inside of the capsules). The exploitation of the capsules as a microcontainer is advantageous not only because of the protection the capsules give to the active molecules, but also because it facilitates easier transport. The second system investigated demonstrates the ability to reduce the permeability of polyelectrolyte multilayer films by the addition of charged wax particles. The incorporation of this hydrophobic coating leads to a reduced water sensitivity particularly after heating, which melts the wax, forming a barrier layer. This conclusion was proven with Neutron Reflectivity by showing the decreased presence of D2O in planar polyelectrolyte films after annealing creating a barrier layer. The permeability of capsules could also be decreased by the addition of a wax layer. This was proved by the increase in recovery time measured by Florescence Recovery After Photobleaching, (FRAP) measurements. In general two advanced methods, potentially suitable for drug delivery systems, have been proposed. In both cases, if biocompatible elements are used to fabricate the capsule wall, these systems provide a stable method of encapsulating active molecules. Stable encapsulation coupled with the ability to tune the wall thickness gives the ability to control the release profile of the molecule of interest.