Refine
Has Fulltext
- no (44)
Year of publication
Document Type
- Article (44) (remove)
Is part of the Bibliography
- yes (44) (remove)
Keywords
- azobenzene (2)
- Azobenzene (1)
- DFB lasers (1)
- LC composites (1)
- LC polymer (1)
- Photoinduced optical anisotropy (1)
- Polarization elements (1)
- Polyimides (1)
- Surface relief grating (1)
- active optical resonators (1)
Institute
This Letter reports on new methods and a consistent model for voltage tunable optical transmission gratings. Elastomeric gratings were molded from holographically written surface relief gratings in an azobenzene sol-gel material. These were placed on top of a transparent electroactive elastomeric substrate. Two different electro-active substrate elastomers were employed, with a large range of prestretches. A novel finite-deformation theory was found to match the device response excellently, without fitting parameters. The results clearly show that the grating underwent pure-shear deformation, and more surprisingly, that the mechanical properties of the electro-active substrate did not affect device actuation. (C) 2011 Optical Society of America
Synthesis, self-organization, and optical properties of supermolecular tripedal liquid crystals incorporating various prototypical mesogenic units such as alkoxy-azobenzene (AZB), alkoxy-biphenylene (BPH) or alkoxy-cyanobiphenyl (OCB) derivatives are reported. Different molecular systems were designed in order to sequentially incorporate the smectogenic-like alkoxy-azobenzene-based chromophore within the molecular structure, whose relative proportion is selectively varied by exchanging with the other mesogens. A divergent synthetic mode was elaborated for their synthesis, starting from the regioselective functionalization of the phloroglucinol-based (PG) inner core. This methodology allowed the preparation of several sets of unconventional tripedal oligomers with conjugated heterolithic structures (made of different blocks, e.g. PG(6)AZB(x)BPH(3-x) and PG(6)AZB(x)OCB(3-x), x = 1 or 2) along the homolithic parents (all identical blocks, e.g. PG(z)AZB(3), z = 6 or 11, z is the number of methylene in the spacer between PG and the protomesogen, PG(6)BPH(3), and PG(6)OCB(3)), respectively. Essentially all the synthesized systems behave as thermotropic liquid crystals and show various types of highly segregated multilayered smectic phases, or, in one case, a nematic phase, depending on the nature of the constitutive anisotropic blocks and on the molecular topology (homolithic versus heterolithic, mesogenic ratio x : 3 - x). The effects of these structural modifications on the mesomorphism (mesophase structures, temperature ranges, and thermodynamic stability) have been investigated by differential scanning calorimetry and small-angle X-ray diffraction experiments combined with dilatometric measurements. Models describing the various supramolecular organizations of these tripedes into such multilayered structures are proposed and discussed. Preliminary results of the investigations of their optical properties will also be presented.
A facile one-pot synthesis for preparing thermosensitive, luminescent gold nanodots with diameters of 1-2 nm is presented. The influence of the alkyl chain length of the surface ligands (alkyl thiols) on the optical properties of the gold nanodots was investigated. The synthesized gold nanodots show strong thermosensitive photoluminescence. A photoluminescence quantum yield of 16.6% was observed at room temperature, which could be improved to a value of 28.6% when cooling the gold nanodot solutions to -7 degrees C. The synthesized thermosensitive, luminescent gold nanodots are interesting candidates for optoelectronic devices, medical imaging, sensing, or security labels.
We studied peculiarities of the structural reconstruction within holographically recorded gratings on the surface of several different amorphous azobenzene-containing polymers. Under illumination with a light interference pattern, two processes take place in this type of polymer. The first process is the light-induced orientation of azobenzene units perpendicular to the polarization plane of the incident light. The second one is a transfer of macromolecules along the grating vector (i.e. perpendicular to the grating lines). These two processes result in the creation of a volume orientation grating (alternating regions of different direction or degree of molecular orientation) and a surface relief grating (SRG)-i.e. modulation of film thickness. One can assume that both orientation of molecules and their movement might change the local mechanical properties of the material. Therefore, formation of the SRG is expected to result also in modulation of the local stiffness of the polymer film. To reveal and investigate these stiffness changes within the grating, spin-coated polymer films were prepared and the gratings were recorded on them in two different ways: with an orthogonal circular or orthogonal linear polarization of two recording light beams. A combination of atomic force microscopy (AFM) and ultrasonic force microscopy (UFM) techniques was applied for SRG development monitoring. We demonstrate that formation of the phase gratings depends on the chemical structure of polymers being used, polymer film thickness, and recording parameters, with the height of grating structures (depth of modulation) increasing with both the exposure time and the film thickness. UFM images suggest that the slopes of the topographic peaks in the phase gratings exhibit an increased stiffness with respect to the grating depressions.
A new class of star-shaped, liquid crystalline, low-molecular weight compounds functionalized with photochromic azobenzene and mesogenic groups was investigated in terms of light-induced anisotropy. The behaviour of the materials under the action of light with simultaneous or subsequent thermal treatment was examined with respect to the induction of anisotropy. The unconventional UV light treatment prior to the irradiation with linearly polarized light allowed induction of very high values of anisotropy (D = 0.77) at room temperature. Moreover, the simultaneous action of light and temperature led to the induction of higher values of dichroism in comparison with anisotropy generated by the standard procedure. Subsequent thermal treatment led to dewetting and the formation of 3D macroscopic stripe- and dome-like structures for one of the investigated compounds. Despite photoinduction of anisotropy by a single beam, the formation of polarization and surface relief gratings by two-beam interference pattern was also investigated.
Threshold reduction and emission enhancement are reported for a gold nanoparticle-based waveguided random laser, exploiting the localized surface plasmon resonance excitation. It was experimentally found that a proper thickness of the spacer layer between the gold nanoparticles and the gain layer enhances the random laser performance. It tunes the coupling between the gain polymer and the gold nanoparticles and avoids the quenching of emission in close contact to the gold nanoparticles which is considered as one of the main sources of loss in the current laser system. (C) 2013 American Institute of Physics. [http://dx.doi.org/10.1063/1.4800776]
We report on the influence of localized surface plasmon resonance excitation of Au@SiO2 core-shell nanoparticles on the amplified spontaneous emission of a semiconductor polymer composite (F8BT/MEH-PPV). Au@SiO2 nanoparticles are compatible with the donor-acceptor polymer matrix and get uniformly distributed within the whole polymer film. The plasmon resonance band of the nanoparticles correlates with both the emission and excitation spectra of the polymer composite, as well as with the donor emission and acceptor excitation spectra. We demonstrate that resonantly excited Au@SiO2 nanoparticles enhance the amplified spontaneous emission and the modal gain of the polymer films. The measurement of influential factors reveals that the emission is enhanced predominantly by the increase of acceptor excitation rate, which is accompanied by depletion of the FRET efficiency and increase of quantum yield. The enhancement factor is increased by both introducing a higher loading of plasmonic nanoparticles in the polymer film and increasing the excitation energy. This work shows that these plasmonic nanoantennas are able to enhance the stimulated emission of semiconductor polymers by improving the size mismatch between the excitation light and the emitting polymer.
Effective volume holographic structures based on organic-inorganic photopolymer nanocomposites
(2009)
We demonstrate a practical approach for the development of a broad range of nanocomposites based on acrylate polymers and organically capped inorganic nanoparticles (NPs). The submicrometer scale volume patterning of the nanocomposites using holographic photopolymerization was investigated. The specific adjustment of both the material parameters (core-shell of the NP, monomer mixture, concentrations) and the patterning conditions led to materials that were suitable for the fabrication of effective optical diffractive elements and specific functional microdevices with light-emissive and nonlinear optical (NLO) properties. The nanocomposite preparation and properties, their holographic performance and some examples of functional polymer-NP structures are reported.
The influence of molecular architecture on light-induced SRG formation was investigated. Polymers with different degree of branching were synthesized by ATRP and functionalized with azobenzene chromophores. The polymers differ only in their architecture - linear, 4-, 6-, or 12-arms stars. The photo-induced dichroism as well as the efficiency of SRG formation was similar for all polymers of this series. New consideration for the origin of the driving force was used to explain this behavior. The comparable SRG inscription rate in differently branched polymers can be rationalized by assuming that azobenzene acts as an internal molecular motor and can cause a non-turbulent motion on a scale smaller than that on which normal entanglement restriction forces act.