Refine
Has Fulltext
- no (49)
Year of publication
Document Type
- Article (49) (remove)
Is part of the Bibliography
- yes (49) (remove)
Keywords
- NW Argentina (3)
- Algeria (2)
- Colombia (2)
- Eastern Sierras Pampeanas (2)
- Geochemistry (2)
- Geochronology (2)
- LIBS (2)
- PCA (2)
- 0 (1)
- Amphibolites (1)
The Eastern Sierras Pampeanas are mainly composed of Neoproterozoic-early Palaeozoic metamorphic complexes whose protoliths were sedimentary sequences deposited along the western margin of Gondwana. South of the Sierra de Aconquija, Eastern Sierras Pampeanas, a voluminous metamorphic complex crops out. It is mainly composed of schists, gneisses, marbles, calk-silicate schists, thin layers of amphibolites intercalated with the marbles and granitic veins. The new data correlate the Sierra de Aconquija with others metamorphic units that crop out to the south, at the middle portion of the Sierra de Ancasti. Bulk rock composition reflects originally shales, iron rich shales, wackes, minor litharenites and impure limestones as its protoliths. Moreover, comparisons with the northern Sierra de Aconquija and from La Majada (Sierra de Ancasti) show similar composition. Amphibolites have a basaltic precursor, like those from the La Majada (Sierra de Ancasti) ones. The analyzed metamorphic sequence reflects low to moderate weathering conditions in the sediments source environment and their chemical composition would be mainly controlled by the tectonic setting of the sedimentary basin rather than by the secondary sorting and reworking of older deposits. The sediments composition reveal relatively low maturity, nevertheless the Fe - shale and the litharenite show a tendency of minor maturity among them. The source is related to an acid one for the litharenite protolith and a more basic to intermediate for the other rocks, suggesting a main derivation from intermediate to felsic orogen. The source of the Fe shales may be related to and admixture of the sediments with basic components. Overall the composition point to an upper continental crust as the dominant sediment source for most of the metasedimentary rocks. The protolith of the amphibolites have basic precursors, related to an evolving back-arc basin. The chemical data in combination with the specific sediment association (wackes, shales, Fe-shales and minor litharenites) are characteristic for turbidity currents deposits along tectonically active region. They are also commonly associated with calcareous clays (marbles), commonly observed in the evolution of basins with slope and shelf derived carbonate turbidites. The amphibolites members are probably derived from lava-flows synchronous with the sedimentation during the basin evolution. The basin was controlled by a continental island arc possible evolving to a back-arc setting, as indicated for the mixed nature of the inferred source. The metasedimentary sequence from the Cuesta de La Chilca have petrographic, structural and strong chemical similarities, building a north-south striking belt from the north of the Sierra de Aconquija and to the south along the Sierra de Ancasti (La Majada area). The observed similarities allow to present this portion of the Eastern Sierras Pampeanas as a crustal block that records the sedimentary sequences developed along the geodynamic context of the southwestern margin of Gondwana during the Neoproterozoic and Early Palaeozoic. (C) 2017 Elsevier Ltd. All rights reserved.
The Timpa delle Murge ophiolite in the North Calabrian Unit is part of the Liguride Complex (southern Apennines). The study is concentrated on the gabbroic part of the ophiolite of the Pollino area. They preserve the high-grade ocean floor metamorphic and locally developed flaser textures under ocean floor conditions. The primary magmatic assemblages are clinopyroxene, plagioclase, and opaques. Brown hornblende is a late magmatic phase. Green hornblende, actinolite, albite, chlorite and epidote display metamorphic recrystallization under lower amphibolite facies conditions, followed by greenschist facies. The gabbros show subalkaline near to alkaline character with a tendency to a more calkalkaline trend. The normalization to primitive mantle and mid-ocean ridge basalt (N-MORB) compositions indicates a considerable depletion in Nb, P, Zr and Ti and an enrichment in Ba, Rb, K, Sr and Eu. This points to a mantle source, which is not compatible with a "normal" mid-ocean ridge situation. Rather, the gabbros are generated from a N-MORB-like melt with a strong crustal component, which was influenced by subduction related fluids and episodic melting during mid-ocean-ridge processes. Plausible geodynamic settings of the Timpa delle Murge gabbros are oceanic back-arc positions with embryonic MORB-activities. Similar slab contaminated magmatism is also known from the early stage of island arc formation in supra-subduction zone environments like the Izu-Bonin-Mariana island arc.
The Sierra Nevada de Santa Marta in NW Colombia is an isolated massif at the northernmost end of the Andes chain near the boundary with the Caribbean plate. Previous geologic mapping and K-Ar dating have shown that Jurassic plutonic and volcanic units make up a large part of the Santa Marta Massif (SMM). These rocks have been considered to be part of a Jurassic magmatic arc extending from NW Colombia to northern Chile, but without any geochemical basis for comparison. This paper reports on a geochemical and Sr-Nd-Pb isotope study of the Jurassic rocks in the SMM and provides 12 new U-Pb zircon ages from in-situ laser ICP-MS dating. The plutonic and volcanic units span a range from 45 to 78 wt.% SiO2, with a dominance of intermediate to felsic compositions with SiO2 > 57 wt.%. They classify as calc-alkaline, medium to high-K, metaluminous rocks with trace-element features typical for arc-derived magma series. In terms of their major and trace-element compositions, the SMM Jurassic units overlap with contemporary plutonic and volcanic rocks from other regions of the Central and Eastern Cordilleras of Colombia, and confirm an arc affinity. The new U-Pb ages range from 176 +/- 1 Ma to 192 +/- 2 Ma (n = 12), with most between 180 and 188 Ma (n = 7). The initial Sr isotope ratios (at 180 Ma) are between 0.7012 and 0.7071 (n = 29), with 3 outliers attributed to mobilization of Rb and/or Sr, Nearly all samples have negative( )epsilon Nd-(180) values between - 10.3 and 0.0 (n = 30), the two exceptions being only slightly positive (1.1 and 1.9). Measured Pb isotope ratios fall in a narrow range, with Pb-206/Pb-204 from 18.02 to 19.95, (207) Pb/(204) Pb from 15.56 to 15.67 and Pb-208/Pb-204 from 37.76 to 39.04 (n = 28). In the regional context of previous studies, these results confirm early Jurassic ages and an arc affinity for the widespread magmatism exposed in the eastern and northeastern Colombian Andes. We also note patterns in the distribution and composition of magmas. The magmatic activity in the Central Cordillera tends to be younger than in the Eastern Cordillera and is spatially more restricted to the vicinity of regional fault systems. In terms of composition, Jurassic igneous rocks in the Eastern Cordillera have systematically lower epsilon Nd-(180) values than those from the Central Cordillera, whereas the Pb isotope ratios overlap. We ascribe the Nd isotope variations to heterogeneity in the mantle source and/or degree of crustal contamination, whereas the Pb isotope ratios are crust-dominated and similar throughout the region. The spatio-temporal and compositional evolution of Jurassic magmatic rocks in the Northern Andes reflect the major plate kinematic readjustment between the Triassic and the Early Jurassic in the proto-Andean margin.
The paper presents the first study of heavy-mineral sand beaches from the Mediterranean coast of Annaba/Algeria. The studied beaches run along the basement outcrops of the Edough massif, which are mainly composed by micaschists, tourmaline-rich quartzo-feldspathic veins, gneisses, skarns and marbles. Sand samples were taken from three localities (Ain Achir, Plage-Militaire and El Nasr). The heavy-mineral fraction comprises between 74 and 91 vol%. The garnets of the beaches are almandine rich and tourmalines vary with respect to their location from schorl to dravite. Tourmaline at Ain Achir and the Plage-Militaire is schorlits, while at El Nasr beach dravite is ubiquitous. The World Shale Average normalised REE of the sands and the basement outcrops reveal: (i) Ain Achir beach: REE pattern of sand and the coastal rocks from the studied beaches reflects a multiple sources; (ii) Plage-Militaire: the sand and the coastal outcrops show similar LREE and a strong enrichment in HREE, suggesting the presence HREE-rich phases found as inclusions in staurolite; (iii) El Nasr: two types of sand patterns are found: one with flat REE pattern similar to the proximal rocks and other one enriched in HREE suggesting a mixed source.
The Cumbres Calchaquies Range forms part of the Famatinian metamorphic basement of the Eastern Sierras Pampeanas. The sedimentary protoliths of the metamorphic sequence were deposited in a marine basin alongside the western margin of Gondwana during the Neoproterozoic. New petrologic, geochemical and thermobarometric data give insight into the evolution of the sedimentary basin, its sediment source area, its later metamorphic overprint and its regional relationship to other parts of the Famatinian basement. The metamorphic series studied here consists of banded schists and gneisses and rare calcsilcate-rocks and migmatites that have been reworked by mid-to deep-crustal metamorphic and tectonic processes. The bulk rock compositions indicate shale, wacke, marl and litharenitic protoliths. The metamorphosed elastic sediments have major and trace element compositions indicating a continental granitoid-dominated source area with low sediment recycling. Low SiO2/Al2O3 ratios suggest a relatively low maturity of the sedimentary protoliths. Therefore, the Cumbres Calchaquies section represents a sequence of turbidity currents with progressive shallowing of the depositional environment, as indicated by quartz- and carbonate-rich sediments. The overall data are consistent with the geodynamic environment of a basin adjacent to a continental magmatic arc as the most probable scenario. Whereas the sedimentary protoliths of the metamorphic basement in the Sierra de Ancasti and Sierra de Aconquija, located ca 100-300 km south of the study area are interpreted as originating in an evolving back-arc basin, our results from the Cumbres Calchaquies region indicate a sedimentary source in a felsic continental arc with no significant influx of basic rocks. The Famatinian metamorphic evolution of the Cumbres Calchaquies rocks is of typical Barrow-type, culminating in partial melting of the metasediments. Conventional thermobarometry combined with thermodynamic models (pseudosections) reveal a prograde evolution reaching peak conditions of ca 665 degrees C/6.1 Kbar. This implies a geothermal gradient of ca 35 degrees C/km, which is slightly higher than the average for continental crust and suggests a period of crustal thinning, as known from back-arc basins, or additional heat supply by voluminous intrusions.
The Andean Plateau of NW Argentina is a prominent example of a high-elevation orogenic plateau characterized by internal drainage, arid to hyper-arid climatic conditions and a compressional basin-and-range morphology comprising thick sedimentary basins. However, the development of the plateau as a geomorphic entity is not well understood. Enhanced orographic rainout along the eastern, windward plateau flank causes reduced fluvial run-off and thus subdued surface-process rates in the arid hinterland. Despite this, many Puna basins document a complex history of fluvial processes that have transformed the landscape from aggrading basins with coalescing alluvial fans to the formation of multiple fluvial terraces that are now abandoned. Here, we present data from the San Antonio de los Cobres (SAC) area, a sub-catchment of the Salinas Grandes Basin located on the eastern Puna Plateau bordering the externally drained Eastern Cordillera. Our data include: (a) new radiometric U-Pb zircon data from intercalated volcanic ash layers and detrital zircons from sedimentary key horizons; (b) sedimentary and geochemical provenance indicators; (c) river profile analysis; and (d) palaeo-landscape reconstruction to assess aggradation, incision and basin connectivity. Our results suggest that the eastern Puna margin evolved from a structurally controlled intermontane basin during the Middle Miocene, similar to intermontane basins in the Mio-Pliocene Eastern Cordillera and the broken Andean foreland. Our refined basin stratigraphy implies that sedimentation continued during the Late Mio-Pliocene and the Quaternary, after which the SAC area was subjected to basin incision and excavation of the sedimentary fill. Because this incision is unrelated to baselevel changes and tectonic processes, and is similar in timing to the onset of basin fill and excavation cycles of intermontane basins in the adjacent Eastern Cordillera, we suspect a regional climatic driver, triggered by the Mid-Pleistocene Climate Transition, caused the present-day morphology. Our observations suggest that lateral orogenic growth, aridification of orogenic interiors, and protracted plateau sedimentation are all part of a complex process chain necessary to establish and maintain geomorphic characteristics of orogenic plateaus in tectonically active mountain belts.
Britholite group minerals (REE,Ca)(5)[(Si,P)O-4](3)(OH,F) are widespread rare-earth minerals in alkaline rocks and their associated metasomatic zones, where they usually are minor accessory phases. An exception is the REE deposit Rodeo de los Molles, Central Argentina, where fluorbritholite-(Ce) (FBri) is the main carrier of REE and is closely intergrown with fluorapatite (FAp). These minerals reach an abundance of locally up to 75 modal% (FBri) and 20 modal% (FAp) in the vein mineralizations. The Rodeo de los Molles deposit is hosted by a fenitized monzogranite of the Middle Devonian Las Chacras-Potrerillos batholith. The REE mineralization consists of fluorbritholite-(Ce), britholite-(Ce), fluorapatite, allanite-(Ce), and REE fluorcarbonates, and is associated with hydrothermal fluorite, quartz, albite, zircon, and titanite. The REE assemblage takes two forms: irregular patchy shaped REE-rich composites and discrete cross-cutting veins. The irregular composites are more common, but here fluorbritholite-(Ce) is mostly replaced by REE carbonates. The vein mineralization has more abundant and better-preserved britholite phases. The majority of britholite grains at Rodeo de los Molles are hydrothermally altered, and alteration is strongly enhanced by metamictization, which is indicated by darkening of the mineral, loss of birefringence, porosity, and volume changes leading to polygonal cracks in and around altered grains. A detailed electron microprobe study of apatite-britholite minerals from Rodeo de los Molles revealed compositional variations in fluorapatite and fluorbritholite-(Ce) consistent with the coupled substitution of REE3+ + Si4+ = Ca2+ + P5+ and a compositional gap of similar to 4 apfu between the two phases, which we interpret as a miscibility gap. Micrometer-scale intergrowths of fluorapatite in fluorbritholite-(Ce) minerals and vice versa are chemically characterized here for the first time and interpreted as exsolution textures that formed during cooling below the proposed solvus.
EnGeoMAP 2.0-Automated Hyperspectral Mineral Identification for the German EnMAP Space Mission
(2016)
Algorithms for a rapid analysis of hyperspectral data are becoming more and more important with planned next generation spaceborne hyperspectral missions such as the Environmental Mapping and Analysis Program (EnMAP) and the Japanese Hyperspectral Imager Suite (HISUI), together with an ever growing pool of hyperspectral airborne data. The here presented EnGeoMAP 2.0 algorithm is an automated system for material characterization from imaging spectroscopy data, which builds on the theoretical framework of the Tetracorder and MICA (Material Identification and Characterization Algorithm) of the United States Geological Survey and of EnGeoMAP 1.0 from 2013. EnGeoMAP 2.0 includes automated absorption feature extraction, spatio-spectral gradient calculation and mineral anomaly detection. The usage of EnGeoMAP 2.0 is demonstrated at the mineral deposit sites of Rodalquilar (SE-Spain) and Haib River (S-Namibia) using HyMAP and simulated EnMAP data. Results from Hyperion data are presented as supplementary information.
New tools and algorithms for geological femote Sensing are developed and verified at test sites throughout the world in preparation of the German hyperspectral satellite Mission (EnMAP), which is an Environmental Mapping and Analysis Program. The aggeneys Cu-Pb-Zn deposit, situated in the arid north western part of South Africa, represents a unique field laboratory for testing these new tools. Here spaceborne hyperspectral data covering the Swartberg, and hyperspectral spaceborne data can be demonkrated, such as the Iron Feature Depth index (IFD), which has recently been proposed for mine waste mapping in the North West Province of South Africa and for gossan detection at Haib River in South Namibia. The work presented here explores the potential of the IFD for gossan mapping and characterization at Gamsberg and Big Syncline, from EO-1 ALI and Landsat-8 OLI data together with mineral maps from expert systems such as the United States Geological Survey (USGS) Material Identification and Characterization Algorithm (MICA), and first results from EnMAPs EnGeoMAP algorithm. Field spectroscopic measurements and field sampling were carried out to validate and calibrate the results from the expert systems and the IFD. This ground truthing is a necessary complementary step to link the results from the expert systems and the IFD to in-situ field spectroscopy. Future mineral exploration initiatives may benefit from the techniques described here, because they can significantly narrow the expensive, exploration activities such as hyperspectral airborne data, field activities and drilling, by identifying the most promising mineral anomalies in an area from the spaceborne data.
Pseudotachylitic breccia (PTB) in the form of cm-wide melt breccia veinlets locally occurs on the exposed central uplift of the 380Ma Siljan impact structure. The host rock to the PTBs is the so-called Jarna granite of quartz monzonitic to syenodioritic composition. The nearly 603m long BH-5 drill core from Hattberg, near the centre of the Siljan central uplift, contains numerous veins and pods of PTB. In particular, two major zones of 60m combined width contain extensive PTB network breccias (30% actual melt breccia component), with individual melt breccia occurrences up to >1m in length. Core logging and petrographic and geochemical analysis of the core have been performed, and the data are interpreted to suggest the following. (1) The impact event caused low to moderate (at essentially <20GPa) shock deformation in the host rock and in clasts of this lithology within the PTB. (2) Macroscopic deformation of the basement mainly comprises fracturing, with only localised cataclasis. (3) No evidence for shock melting (i.e. compression/decompression melting early in the cratering process) could be observed. (4) Optical and scanning electron microscopy showed that dark PTB contains a definite melt component. (5) Shearing has significantly affected this part of the central uplift, but its effects are limited to very short displacements and likely did not result in extensive melting. (6) A frictional heating component upon melt generation can, however, not be excluded, as many PTB samples contain clasts of a mafic (gabbroic) component, although only in one place along the entire core, a 1.2cm-wide section through such material in direct contact to host rock was observed. Consequently, we suggest that, upon uplift in the central part of the impact structure, considerable melt volumes were generated locally, especially in areas that had been affected by extensive cataclasis and where grain size comminution favoured melt formation. Rapid decompression related to central uplift formation is the preferred process for the generation of the PTB melt breccias.