Refine
Has Fulltext
- yes (3)
Document Type
Language
- German (3) (remove)
Is part of the Bibliography
- yes (3)
Keywords
- Photoorientierung (3) (remove)
Institute
Die Beeinflussung optischer Eigenschaften durch Bestrahlung stellt eine Grundlage für die Herstellung anisotroper optischer Komponenten dar. In dünnen Schichten von Azobenzen-Polymeren kann optische Anisotropie durch linear polarisierte Bestrahlung induziert oder modifiziert werden. Ziel der Arbeit war es, wesentliche Struktur-Eigenschafts-Beziehungen zum Prozess der Photoorientierung zu erarbeiten, um so eine Optimierung der Materialien für verschiedene Anwendungen ermöglichen. In isotropen Schichten flüssigkristalliner und amorpher Azobenzen-Polymeren wird das Ausmaß der induzierten optischen Anisotropie günstig durch eine Donor/Akzeptor-Substitution in 4,4'-Position beeinflusst. Die Induktionsgeschwindigkeit ist in Schichten flüssigkristalliner Polymeren deutlich geringer, jedoch lassen sich höhere Werte der Doppelbrechung und des Dichroismus erreichen. In Copolymeren bewirkt die Photoorientierung der Azobenzen-Seitengruppen eine kooperative Orientierung von formanisotropen Seitengruppen. Die Mesogenität der nicht-photochromen Seitengruppen erhöht das Ausmaß der induzierten optischen Anisotropie. Die Stabilität der induzierten Doppelbrechung und des Dichroismus wird durch diese Gruppen gesteigert. In Schichten flüssigkristalliner Polymeren wird die induzierte optische Anisotropie beim Tempern im Bereich der Mesophasen erheblich verstärkt. Dabei reicht ein geringes Maß an induzierter Anisotropie aus, um Doppelbrechungs- und Dichroismuswerte zu erzielen, wie sie für LC-Domänen typisch sind. In orientierten Schichten von Azobenzen-Polymeren wird das Resultat der linear polarisierten Bestrahlung durch die Stärke der anisotropen Wechselwirkungen in den flüssigkristallinen Domänen oder den LB-Multilayern bestimmt. Eine lichtinduzierte Reorientierung kann nur erreicht werden, wenn diese Wechselwirkungen überwunden werden können. Erfolgt eine Photoreorientierung in den orientierten Polymerschichten, werden in Copolymeren formanisotrope Seitengruppen ebenfalls kooperativ reorientiert. Eine vorgelagerte UV-Bestrahlung kann durch Erzeugung eines hohen Anteils an nicht-mesogenen Z-Isomeren die anisotropen Wechselwirkungen stark schwächen und so die Seitengruppen entkoppeln. Aus diesem Zustand erfolgt die Photoreorientierung mit einer der Photoorientierung in isotropen Schichten vergleichbaren Effizienz. Die erarbeiteten Struktur-Eigenschafts-Beziehungen liefern einen Beitrag zur Optimierung derartiger Materialien für Anwendungen in den Bereichen optischer Funktionsschichten, holographischer Datenspeicherung oder der Generierung von Oberflächenreliefgittern.
Eine Nutzung der optischen Anisotropie dünner Schichten ist vor allem für die Displaytechnologie, die optische Datenspeicherung und für optische Sicherheitselemente von hoher Bedeutung. Diese Doktorarbeit befasst sich mit theoretischen und experimentellen Untersuchung von dreidimensionaler Anisotropie und dabei insbesondere mit der Untersuchung von lichtinduzierter dreidimensionaler Anisotropie in organischen dünnen Polymer-Schichten. Die gewonnenen Erkentnisse und entwickelten Methoden können wertvolle Beiträge für Optimierungsprozesse, wie bei der Kompensation der Blickwinkelabhängigkeit von Flüssigkristall-Displays, liefern. Die neue Methode der Immersions-Transmissions-Ellipsometrie (ITE) zur Untersuchung von dünneren Schichten wurde im Rahmen dieser Dissertation entwickelt. Diese Methode gestattet es, in Kombination mit konventioneller Reflexions- und Transmissionsellipsometrie, die absoluten dreidimensionalen Brechungsindices einer biaxialen Schicht zu bestimmen. Erstmals gelang es damit, das dreidimensionale Brechungsindexellipsoid von transparenten, dünneren (150 nm) Filmen hochgenau (drei Stellen hinter dem Komma) zu bestimmen. Die ITE-Methode hat demzufolge das Potential, auch bei noch dünneren Schichten mit Gewinn eingesetzt werden zu können. Die lichtinduzierte Generierung von dreidimensionaler Anisotropie wurde in dünnen Schichten von azobenzenhaltigen und zimtsäurehaltigen, amorphen und flüssig-kristallinen Homo- und Copolymeren untersucht. Erstmals wurden quantitative Untersuchungen zur Änderung von lichtinduzierten, dreidimensionalen Anisotropien in dünnen Schichten von azobenzenhaltigen und zimtsäurehaltigen Polymeren bei Tempern oberhalb der Glastemperatur durchgeführt. Bei vielen der untersuchten Polymere war die dreidimensionale Ordnung nach dem Bestrahlen mit polarisiertem Licht und anschließendem Tempern oberhalb der Glastemperatur scheinbar von der Schichtdicke abhängig. Die Ursache liegt wohl in der, mit der neuentwickelten ITE-Methode detektierten, planaren Ausgangsorientierung der aufgeschleuderten dünneren Schichten. Um Verkippungs-Gradienten in dickeren Polymerschichten in ihrem Verlauf zu bestimmen, wurde eine spezielle Methode unter Benutzung der Wellenleitermoden-Spektroskopie entwickelt. Quantenchemisch bestimmte, maximal induzierbare Doppelbrechungen in flüssig-kristallinen Polymeren wurden mit den experimentell gefundenen Ordnungen verglichen.
Eine Nutzung der optischen Anisotropie dünner Schichten ist vor allem für die Displaytechnologie, die optische Datenspeicherung und für optische Sicherheitselemente von hoher Bedeutung. Diese Doktorarbeit befasst sich mit theoretischen und experimentellen Untersuchung von dreidimensionaler Anisotropie und dabei insbesondere mit der Untersuchung von lichtinduzierter dreidimensionaler Anisotropie in organischen dünnen Polymer-Schichten. Die gewonnenen Erkentnisse und entwickelten Methoden können wertvolle Beiträge für Optimierungsprozesse, wie bei der Kompensation der Blickwinkelabhängigkeit von Flüssigkristall-Displays, liefern. Die neue Methode der Immersions-Transmissions-Ellipsometrie (ITE) zur Untersuchung von dünneren Schichten wurde im Rahmen dieser Dissertation entwickelt. Diese Methode gestattet es, in Kombination mit konventioneller Reflexions- und Transmissionsellipsometrie, die absoluten dreidimensionalen Brechungsindices einer biaxialen Schicht zu bestimmen. Erstmals gelang es damit, das dreidimensionale Brechungsindexellipsoid von transparenten, dünneren (150 nm) Filmen hochgenau (drei Stellen hinter dem Komma) zu bestimmen. Die ITE-Methode hat demzufolge das Potential, auch bei noch dünneren Schichten mit Gewinn eingesetzt werden zu können. Die lichtinduzierte Generierung von dreidimensionaler Anisotropie wurde in dünnen Schichten von azobenzenhaltigen und zimtsäurehaltigen, amorphen und flüssig-kristallinen Homo- und Copolymeren untersucht. Erstmals wurden quantitative Untersuchungen zur Änderung von lichtinduzierten, dreidimensionalen Anisotropien in dünnen Schichten von azobenzenhaltigen und zimtsäurehaltigen Polymeren bei Tempern oberhalb der Glastemperatur durchgeführt. Bei vielen der untersuchten Polymere war die dreidimensionale Ordnung nach dem Bestrahlen mit polarisiertem Licht und anschließendem Tempern oberhalb der Glastemperatur scheinbar von der Schichtdicke abhängig. Die Ursache liegt wohl in der, mit der neuentwickelten ITE-Methode detektierten, planaren Ausgangsorientierung der aufgeschleuderten dünneren Schichten. Um Verkippungs-Gradienten in dickeren Polymerschichten in ihrem Verlauf zu bestimmen, wurde eine spezielle Methode unter Benutzung der Wellenleitermoden-Spektroskopie entwickelt. Quantenchemisch bestimmte, maximal induzierbare Doppelbrechungen in flüssig-kristallinen Polymeren wurden mit den experimentell gefundenen Ordnungen verglichen.