Refine
Has Fulltext
- yes (4)
Document Type
- Doctoral Thesis (4)
Language
- German (4) (remove)
Keywords
- GIS (4) (remove)
Institute
- Institut für Umweltwissenschaften und Geographie (4) (remove)
Die automatisierte Objektidentifikation stellt ein modernes Werkzeug in den Geoinformationswissenschaften dar (BLASCHKE et al., 2012). Um bei thematischen Kartierungen untereinander vergleichbare Ergebnisse zu erzielen, sollen aus Sicht der Geoinformatik Mittel für die Objektidentifikation eingesetzt werden. Anstelle von Feldarbeit werden deshalb in der vorliegenden Arbeit multispektrale Fernerkundungsdaten als Primärdaten verwendet. Konkrete natürliche Objekte werden GIS-gestützt und automatisiert über große Flächen und Objektdichten aus Primärdaten identifiziert und charakterisiert. Im Rahmen der vorliegenden Arbeit wird eine automatisierte Prozesskette zur Objektidentifikation konzipiert. Es werden neue Ansätze und Konzepte der objektbasierten Identifikation von natürlichen isolierten terrestrischen Oberflächenformen entwickelt und implementiert. Die Prozesskette basiert auf einem Konzept, das auf einem generischen Ansatz für automatisierte Objektidentifikation aufgebaut ist. Die Prozesskette kann anhand charakteristischer quantitativer Parameter angepasst und so umgesetzt werden, womit das Konzept der Objektidentifikation modular und skalierbar wird. Die modulbasierte Architektur ermöglicht den Einsatz sowohl einzelner Module als auch ihrer Kombination und möglicher Erweiterungen. Die eingesetzte Methodik der Objektidentifikation und die daran anschließende Charakteristik der (geo)morphometrischen und morphologischen Parameter wird durch statistische Verfahren gestützt. Diese ermöglichen die Vergleichbarkeit von Objektparametern aus unterschiedlichen Stichproben. Mit Hilfe der Regressionsund Varianzanalyse werden Verhältnisse zwischen Objektparametern untersucht. Es werden funktionale Abhängigkeiten der Parameter analysiert, um die Objekte qualitativ zu beschreiben. Damit ist es möglich, automatisiert berechnete Maße und Indizes der Objekte als quantitative Daten und Informationen zu erfassen und unterschiedliche Stichproben anzuwenden. Im Rahmen dieser Arbeit bilden Thermokarstseen die Grundlage für die Entwicklungen und als Beispiel sowie Datengrundlage für den Aufbau des Algorithmus und die Analyse. Die Geovisualisierung der multivariaten natürlichen Objekte wird für die Entwicklung eines besseren Verständnisses der räumlichen Relationen der Objekte eingesetzt. Kern der Geovisualisierung ist das Verknüpfen von Visualisierungsmethoden mit kartenähnlichen Darstellungen.
Die Kartierung planetarer Körper stellt ein wesentliches Mittel der raumfahrtgestützten Exploration der Himmelskörper dar. Aktuell kommen zur Erstellung der planetaren Karten Geo-Informationssysteme (GIS) zum Einsatz. Ziel dieser Arbeit ist es, eine GIS-orientierte Prozesskette (Planetary Mapping System (PMS)) zu konzipieren, mit dem Schwerpunkt geologische und geomorphologische Karten planetarer Oberflächen einheitlich durchführen zu können und nachhaltig zugänglich zu machen.
Die visuelle Kommunikation ist eine effiziente Methode, um dynamische Phänomene zu beschreiben. Informationsobjekte präzise wahrzunehmen, einen schnellen Zugriff auf strukturierte und relevante Informationen zu ermöglichen, erfordert konsistente und nach dem formalen Minimalprinzip konzipierte Analyse- und Darstellungsmethoden. Dynamische Raumphänomene in Geoinformationssystemen können durch den Mangel an konzeptionellen Optimierungsanpassungen aufgrund ihrer statischen Systemstruktur nur bedingt die Informationen von Raum und Zeit modellieren. Die Forschung in dieser Arbeit ist daher auf drei interdisziplinäre Ansätze fokussiert. Der erste Ansatz stellt eine echtzeitnahe Datenerfassung dar, die in Geodatenbanken zeitorientiert verwaltet wird. Der zweite Ansatz betrachtet Analyse- und Simulationsmethoden, die das dynamische Verhalten analysieren und prognostizieren. Der dritte Ansatz konzipiert Visualisierungsmethoden, die insbesondere dynamische Prozesse abbilden. Die Symbolisierung der Prozesse passt sich bedarfsweise in Abhängigkeit des Prozessverlaufes und der Interaktion zwischen Datenbanken und Simulationsmodellen den verschiedenen Entwicklungsphasen an. Dynamische Aspekte können so mit Hilfe bewährter Funktionen aus der GI-Science zeitnah mit modularen Werkzeugen entwickelt und visualisiert werden. Die Analyse-, Verschneidungs- und Datenverwaltungsfunktionen sollen hierbei als Nutzungs- und Auswertungspotential alternativ zu Methoden statischer Karten dienen. Bedeutend für die zeitliche Komponente ist das Verknüpfen neuer Technologien, z. B. die Simulation und Animation, basierend auf einer strukturierten Zeitdatenbank in Verbindung mit statistischen Verfahren. Methodisch werden Modellansätze und Visualisierungstechniken entwickelt, die auf den Bereich Verkehr transferiert werden. Verkehrsdynamische Phänomene, die nicht zusammenhängend und umfassend darstellbar sind, werden modular in einer serviceorientierten Architektur separiert, um sie in verschiedenen Ebenen räumlich und zeitlich visuell zu präsentieren. Entwicklungen der Vergangenheit und Prognosen der Zukunft werden über verschiedene Berechnungsmethoden modelliert und visuell analysiert. Die Verknüpfung einer Mikrosimulation (Abbildung einzelner Fahrzeuge) mit einer netzgesteuerten Makrosimulation (Abbildung eines gesamten Straßennetzes) ermöglicht eine maßstabsunabhängige Simulation und Visualisierung des Mobilitätsverhaltens ohne zeitaufwendige Bewertungsmodellberechnungen. Zukünftig wird die visuelle Analyse raum-zeitlicher Veränderungen für planerische Entscheidungen ein effizientes Mittel sein, um Informationen übergreifend verfügbar, klar strukturiert und zweckorientiert zur Verfügung zu stellen. Der Mehrwert durch visuelle Geoanalysen, die modular in einem System integriert sind, ist das flexible Auswerten von Messdaten nach zeitlichen und räumlichen Merkmalen.
Entwicklung, Implementierung und Erprobung eines planetaren Informationssystems auf Basis von ArcGIS
(2007)
Mit der Entwicklung der modernen Raumfahrt Mitte der 60er-Jahre des zwanzigsten Jahrhunderts und der Eroberung des Weltraums brach eine neue Epoche der bis dato auf Beobachtungen mit dem Teleskop gestützten planetaren Forschung an. Während des Wettrennens um die technologische Führerschaft im All zur Zeit des Kalten Krieges war das erste Ziel die Entsendung von Satelliten zur Erdbeobachtung, denen aber schon bald Sonden zum Mond und den benachbarten Planeten folgten. Diese Missionen lieferten eine enorme Fülle von Informationen in Form von Bildern und Messergebnissen in unterschiedlichen Datenformaten. Diese galt und gilt es zu strukturieren, zu verwalten, zu aktualisieren und zu interpretieren. Für die Interpretation terrestrischer Daten werden geographische Informationssysteme (GIS) hinzugezogen, die jedoch für planetare Anwendungen aufgrund unterschiedlicher Voraussetzungen nicht ohne weiteres eingesetzt werden können. Daher wurde im Rahmen dieser Arbeit die für die Verwaltung von geographischen Daten der Erdfernerkundung kommerziell erhältliche Software ArcGIS Desktop 9.0 / 9.1 (ESRI) mit eigenen Programmen und Modulen für die Planetenforschung angepasst. Diese ermöglichen die Aufbereitung und den Import planetarer Bild- und Textinformation in die kommerzielle Software. Zusätzlich wurde eine planetare Datenbank zur Speicherung und zentralen Verwaltung der Informationen aufgebaut. Die im Rahmen dieser Arbeit entwickelten Softwarekomponenten ermöglichen die schnelle und benutzerfreundliche Aufbereitung der in der Datenbank gehaltenen Informationen und das Auslesen in Dateiformate, die für geographische Informationssysteme geeignet sind. Des Weiteren wurde eine „Werkzeugleiste“ für ArcGIS entwickelt, die das Arbeiten mit planetaren Datensätzen beträchtlich beschleunigt und vereinfacht. Sie beinhaltet auch Module zur wissenschaftlichen Interpretation der planetaren Informationen, wie beispielsweise der Berechnung der Oberflächenrauigkeit der Marsoberfläche inklusive der flächendeckenden Kalibrierung der Eingangs-Basisdaten. Exemplarisch konnte gezeigt werden, dass das Verfahren eine verbesserte Berechnung der Oberflächenrauigkeit ermöglicht, als bisher angewandte Ansätze. Zudem wurde eine auf ArcGIS basierende Prozesskette zur Berechnung von hierarchischen Flussnetzen entwickelt und erprobt. Das terrestrische Beispiel, die Analyse eines Abflusssystems auf Island, zeigte eine sehr große Übereinstimmung der errechneten Gewässernetze mit den morphologischen Gegebenheiten vor Ort. Daraus ließ sich eine hohe Genauigkeit der mit demselben Ansatz errechneten Gewässernetze auf dem Mars ableiten. Auf der Grundlage der in dieser Arbeit entwickelten Programme und Module lassen sich auch Daten zukünftiger Missionen aufbereiten und in ein solches System einbinden, um diese mit eigenen Ansätzen zu verwalten, zu aktualisieren und für neue wissenschaftliche Fragestellungen perfekt anzupassen, einzusetzen und zu präsentieren, um so neue wissenschaftliche Erkenntnisse in der Planetenforschung zu gewinnen.