Refine
Year of publication
- 2013 (187) (remove)
Document Type
- Article (140)
- Doctoral Thesis (35)
- Review (5)
- Preprint (4)
- Other (2)
- Monograph/Edited Volume (1)
Is part of the Bibliography
- yes (187) (remove)
Keywords
- Climate change (4)
- Land use change (4)
- Iran (3)
- Northeast German Basin (3)
- Soil hydrology (3)
- climate change (3)
- erosion (3)
- exhumation (3)
- remote sensing (3)
- thermochronology (3)
Institute
- Institut für Geowissenschaften (187) (remove)
Water management and environmental protection is vulnerable to extreme low flows during streamflow droughts. During the last decades, in most rivers of Central Europe summer runoff and low flows have decreased. Discharge projections agree that future decrease in runoff is likely for catchments in Brandenburg, Germany. Depending on the first-order controls on low flows, different adaption measures are expected to be appropriate. Small catchments were analyzed because they are expected to be more vulnerable to a changing climate than larger rivers. They are mainly headwater catchments with smaller ground water storage. Local characteristics are more important at this scale and can increase vulnerability. This thesis mutually evaluates potential adaption measures to sustain minimum runoff in small catchments of Brandenburg, Germany, and similarities of these catchments regarding low flows. The following guiding questions are addressed: (i) Which first-order controls on low flows and related time scales exist? (ii) Which are the differences between small catchments regarding low flow vulnerability? (iii) Which adaption measures to sustain minimum runoff in small catchments of Brandenburg are appropriate considering regional low flow patterns? Potential adaption measures to sustain minimum runoff during periods of low flows can be classified into three categories: (i) increase of groundwater recharge and subsequent baseflow by land use change, land management and artificial ground water recharge, (ii) increase of water storage with regulated outflow by reservoirs, lakes and wetland water management and (iii) regional low flow patterns have to be considered during planning of measures with multiple purposes (urban water management, waste water recycling and inter-basin water transfer). The question remained whether water management of areas with shallow groundwater tables can efficiently sustain minimum runoff. Exemplary, water management scenarios of a ditch irrigated area were evaluated using the model Hydrus-2D. Increasing antecedent water levels and stopping ditch irrigation during periods of low flows increased fluxes from the pasture to the stream, but storage was depleted faster during the summer months due to higher evapotranspiration. Fluxes from this approx. 1 km long pasture with an area of approx. 13 ha ranged from 0.3 to 0.7 l\s depending on scenario. This demonstrates that numerous of such small decentralized measures are necessary to sustain minimum runoff in meso-scale catchments. Differences in the low flow risk of catchments and meteorological low flow predictors were analyzed. A principal component analysis was applied on daily discharge of 37 catchments between 1991 and 2006. Flows decreased more in Southeast Brandenburg according to meteorological forcing. Low flow risk was highest in a region east of Berlin because of intersection of a more continental climate and the specific geohydrology. In these catchments, flows decreased faster during summer and the low flow period was prolonged. A non-linear support vector machine regression was applied to iteratively select meteorological predictors for annual 30-day minimum runoff in 16 catchments between 1965 and 2006. The potential evapotranspiration sum of the previous 48 months was the most important predictor (r²=0.28). The potential evapotranspiration of the previous 3 months and the precipitation of the previous 3 months and last year increased model performance (r²=0.49, including all four predictors). Model performance was higher for catchments with low yield and more damped runoff. In catchments with high low flow risk, explanatory power of long term potential evapotranspiration was high. Catchments with a high low flow risk as well as catchments with a considerable decrease in flows in southeast Brandenburg have the highest demand for adaption. Measures increasing groundwater recharge are to be preferred. Catchments with high low flow risk showed relatively deep and decreasing groundwater heads allowing increased groundwater recharge at recharge areas with higher altitude away from the streams. Low flows are expected to stay low or decrease even further because long term potential evapotranspiration was the most important low flow predictor and is projected to increase during climate change. Differences in low flow risk and runoff dynamics between catchments have to be considered for management and planning of measures which do not only have the task to sustain minimum runoff.
Intra-continental mountain belts typically form as a result of tectonic forces associated with distant plate collisions. In general, each mountain belt has a distinctive morphology and orogenic evolution that is highly dependent on the unique distribution and geometries of inherited structures and other crustal weaknesses. In this thesis, I have investigated the complex and irregular Cenozoic orogenic evolution of the Central Kyrgyz Tien Shan in Central Asia, which is presently one of the most active intra-continental mountain belts in the world. This work involved combining a broad array of datasets, including thermochronologic, magnetostratigraphic, sediment provenance and stable isotope data, to identify and date various changes in tectonic deformation, climate and surface processes. Many of these changes are linked and can ultimately be related to regional-scale processes that altered the orogenic evolution of the Central Kyrgyz Tien Shan. The Central Kyrgyz Tien Shan contains a sub-parallel series of structures that were reactivated in the late Cenozoic in response to the tectonic forces associated with the distant India-Eurasia collision. Over time, slip on the various reactivated structures created the succession of mountain ranges and intermontane basins which characterises the modern morphology of the region. In this thesis, new quantitative constraints on the exhumation histories of several mountain ranges have been obtained by using low temperature thermochronological data from 95 samples (zircon (U-Th)/He, apatite fission track and (U-Th)/He). Time-temperature histories derived by modelling the thermochronologic data of individual samples identify at least two stages of Cenozoic cooling in most of the region’s mountain ranges: (1) initially low cooling rates (<1°C/Myr) during the tectonic quiescent period and (2) increased cooling in the late Cenozoic, which occurred diachronously and with variable magnitude in different ranges. This second cooling stage is interpreted to represent increased erosion caused by active deformation, and in many of the sampled mountain ranges, provides the first available constraints on the timing of late Cenozoic deformation. New constraints on the timing of deformation have also been derived from the sedimentary record of intermontane basins. In the intermontane Issyk Kul basin, new magnetostratigraphic data from two sedimentary sections suggests that deposition of the first Cenozoic syn-tectonic sediments commenced at ~26 Ma. Zircon U-Pb provenance data, paleocurrent and conglomerate clast analysis reveals that these sediments were sourced from the Terskey Range to the south of the basin, suggesting that the onset of the late Cenozoic deformation occurred >26 Ma in that particular range. Elsewhere, growth strata relationships are used to identify syn-tecotnic deposition and constrain the timing of nearby deformation. Collectively, these new constraints obtained from thermochronologic and sedimentary data have allowed me to infer the spatiotemporal distribution of deformation in a transect through the Central Kyrgyz Tien Shan, and determine the order in which mountain ranges started deforming. These data suggest that deformation began in a few widely-spaced mountain ranges in the late Oligocene and early Miocene. Typically, these earlier mountain ranges are bounded on at least one side by a reactivated structure, which probably corresponds to the frictionally weakest and most suitably orientated inherited structures for accommodating the roughly north-south directed horizontal crustal shortening of the late Cenozoic. Moreover, tectonically-induced rock uplift in the Terskey Range, following the reactivation of the bounding structure before 26 Ma, likely caused significant surface uplift across the range, which in turn lead to enhanced orographic precipitation. These wetter conditions have been inferred from stable isotope data collected in the two magnetostratigraphically-dated sections in the Issyk Kul basin. Subsequently, in the late Miocene (~12‒5 Ma), more mountain ranges and inherited structures appear to have started actively deforming. Importantly, the onset of deformation at these locations in the late Miocene coincides with an increase in exhumation of ranges that had started deforming earlier in the late Oligocene‒early Miocene. Based on this observation, I have suggested that there must have been an overall increase in the rate of horizontal crustal shortening across the Central Kyrgyz Tien Shan, which likely relates to regional tectonic changes that affected much of Central Asia. Many of the mountain ranges that started deforming in the late Miocene were associated with out-of-sequence tectonic reactivation and initiation, which lead to the partitioning of larger intermontane basins. Moreover, within most of the intermontane basins in the Central Kyrgyz Tien Shan, this inferred late Miocene increase in horizontal crustal shortening occurs roughly at the same time as an increase in sedimentation rates and a significant change sediment composition. Therefore, I have suggested that the overall magnitude of deformational processes increased in the late Miocene, promoting more flexural subsidence in the intermontane basins of the Central Kyrgyz Tien Shan.
The main intention of the PhD project was to create a varve chronology for the Suigetsu Varves 2006' (SG06) composite profile from Lake Suigetsu (Japan) by thin section microscopy. The chronology was not only to provide an age-scale for the various palaeo-environmental proxies analysed within the SG06 project, but also and foremost to contribute, in combination with the SG06 14C chronology, to the international atmospheric radiocarbon calibration curve (IntCal). The SG06 14C data are based on terrestrial leaf fossils and therefore record atmospheric 14C values directly, avoiding the corrections necessary for the reservoir ages of the marine datasets, which are currently used beyond the tree-ring limit in the IntCal09 dataset (Reimer et al., 2009). The SG06 project is a follow up of the SG93 project (Kitagawa & van der Plicht, 2000), which aimed to produce an atmospheric calibration dataset, too, but suffered from incomplete core recovery and varve count uncertainties. For the SG06 project the complete Lake Suigetsu sediment sequence was recovered continuously, leaving the task to produce an improved varve count. Varve counting was carried out using a dual method approach utilizing thin section microscopy and micro X-Ray Fluorescence (µXRF). The latter was carried out by Dr. Michael Marshall in cooperation with the PhD candidate. The varve count covers 19 m of composite core, which corresponds to the time frame from ≈10 to ≈40 kyr BP. The count result showed that seasonal layers did not form in every year. Hence, the varve counts from either method were incomplete. This rather common problem in varve counting is usually solved by manual varve interpolation. But manual interpolation often suffers from subjectivity. Furthermore, sedimentation rate estimates (which are the basis for interpolation) are generally derived from neighbouring, well varved intervals. This assumes that the sedimentation rates in neighbouring intervals are identical to those in the incompletely varved section, which is not necessarily true. To overcome these problems a novel interpolation method was devised. It is computer based and automated (i.e. avoids subjectivity and ensures reproducibility) and derives the sedimentation rate estimate directly from the incompletely varved interval by statistically analysing distances between successive seasonal layers. Therefore, the interpolation approach is also suitable for sediments which do not contain well varved intervals. Another benefit of the novel method is that it provides objective interpolation error estimates. Interpolation results from the two counting methods were combined and the resulting chronology compared to the 14C chronology from Lake Suigetsu, calibrated with the tree-ring derived section of IntCal09 (which is considered accurate). The varve and 14C chronology showed a high degree of similarity, demonstrating that the novel interpolation method produces reliable results. In order to constrain the uncertainties of the varve chronology, especially the cumulative error estimates, U-Th dated speleothem data were used by linking the low frequency 14C signal of Lake Suigetsu and the speleothems, increasing the accuracy and precision of the Suigetsu calibration dataset. The resulting chronology also represents the age-scale for the various palaeo-environmental proxies analysed in the SG06 project. One proxy analysed within the PhD project was the distribution of event layers, which are often representatives of past floods or earthquakes. A detailed microfacies analysis revealed three different types of event layers, two of which are described here for the first time for the Suigetsu sediment. The types are: matrix supported layers produced as result of subaqueous slope failures, turbidites produced as result of landslides and turbidites produced as result of flood events. The former two are likely to have been triggered by earthquakes. The vast majority of event layers was related to floods (362 out of 369), which allowed the construction of a respective chronology for the last 40 kyr. Flood frequencies were highly variable, reaching their greatest values during the global sea level low-stand of the Glacial, their lowest values during Heinrich Event 1. Typhoons affecting the region represent the most likely control on the flood frequency, especially during the Glacial. However, also local, non-climatic controls are suggested by the data. In summary, the work presented here expands and revises knowledge on the Lake Suigetsu sediment and enabls the construction of a far more precise varve chronology. The 14C calibration dataset is the first such derived from lacustrine sediments to be included into the (next) IntCal dataset. References: Kitagawa & van der Plicht, 2000, Radiocarbon, Vol 42(3), 370-381 Reimer et al., 2009, Radiocarbon, Vol 51(4), 1111-1150
Black shales are sedimentary rocks with a high content of organic carbon, which leads to a dark grayish to black color. Due to their potential to contain oil or gas, black shales are of great interest for the support of the worldwide energy supply. An integrated seismic investigation of the Lower Palaeozoic black shales was carried out at the Danish island Bornholm to locate the shallow-lying Alum Shale layer and its surrounding formations and to characterize its potential as a source rock. Therefore, two seismic experiments at a total of three crossing profiles were carried out in October 2010 and in June 2012 in the southern part of the island. Two different active measurements were conducted with either a weight drop source or a minivibrator. Additionally, the ambient noise field was recorded at the study location over a time interval of about one day, and also a laboratory analysis of borehole samples was carried out. The seismic profiles were positioned as close as possible to two scientific boreholes which were used for comparative purposes. The seismic field data was analyzed with traveltime tomography, surface wave inversion and seismic interferometry to obtain the P-wave and S-wave velocity models of the subsurface. The P-wave velocity models which were determined for all three profiles clearly locate the Alum Shale layer between the Komstad Limestone layer on top and the Læså Sandstone Formation at the base of the models. The black shale layer has P-wave velocities around 3 km/s which are lower compared to the adjacent formations. Due to a very good agreement of the sonic log and the vertical velocity profiles of the two seismic lines, which are directly crossing the borehole where the sonic log was conducted, the reliability of the traveltime tomography is proven. A correlation of the seismic velocities with the content of organic carbon is an important task for the characterization of the reservoir properties of a black shale formation. It is not possible without calibration but in combination with a full 2D tomographic image of the subsurface it gives the subsurface distribution of the organic material. The S-wave model obtained with surface wave inversion of the vibroseis data of one of the profiles images the Alum Shale layer also very well with S-wave velocities around 2 km/s. Although individual 1D velocity models for each of the source positions were determined, the subsurface S-wave velocity distribution is very uniform with a good match between the single models. A really new approach described here is the application of seismic interferometry to a really small study area and a quite short time interval. Also new is the selective procedure of only using time windows with the best crosscorrelation signals to achieve the final interferograms. Due to the small scale of the interferometry even P-wave signals can be observed in the final crosscorrelations. In the laboratory measurements the seismic body waves were recorded for different pressure and temperature stages. Therefore, samples of different depths of the Alum Shale were available from one of the scientific boreholes at the study location. The measured velocities have a high variance with changing pressure or temperature. Recordings with wave propagation both parallel and perpendicular to the bedding of the samples reveal a great amount of anisotropy for the P-wave velocity, whereas the S-wave velocity is almost independent of the wave direction. The calculated velocity ratio is also highly anisotropic with very low values for the perpendicular samples and very high values for the parallel ones. Interestingly, the laboratory velocities of the perpendicular samples are comparable to the velocities of the field experiments indicating that the field measurements are sensitive to wave propagation in vertical direction. The velocity ratio is also calculated with the P-wave and S-wave velocity models of the field experiments. Again, the Alum Shale can be clearly separated from the adjacent formations because it shows overall very low vP/vS ratios around 1.4. The very low velocity ratio indicates the content of gas in the black shale formation. With the combination of all the different methods described here, a comprehensive interpretation of the seismic response of the black shale layer can be made and the hydrocarbon source rock potential can be estimated.
The Arctic is considered as a focal region in the ongoing climate change debate. The currently observed and predicted climate warming is particularly pronounced in the high northern latitudes. Rising temperatures in the Arctic cause progressive deepening and duration of permafrost thawing during the arctic summer, creating an ‘active layer’ with high bioavailability of nutrients and labile carbon for microbial consumption. The microbial mineralization of permafrost carbon creates large amounts of greenhouse gases, including carbon dioxide and methane, which can be released to the atmosphere, creating a positive feedback to global warming. However, to date, the microbial communities that drive the overall carbon cycle and specifically methane production in the Arctic are poorly constrained. To assess how these microbial communities will respond to the predicted climate changes, such as an increase in atmospheric and soil temperatures causing increased bioavailability of organic carbon, it is necessary to investigate the current status of this environment, but also how these microbial communities reacted to climate changes in the past. This PhD thesis investigated three records from two different study sites in the Russian Arctic, including permafrost, lake shore and lake deposits from Siberia and Chukotka. A combined stratigraphic approach of microbial and molecular organic geochemical techniques were used to identify and quantify characteristic microbial gene and lipid biomarkers. Based on this data it was possible to characterize and identify the climate response of microbial communities involved in past carbon cycling during the Middle Pleistocene and the Late Pleistocene to Holocene. It is shown that previous warmer periods were associated with an expansion of bacterial and archaeal communities throughout the Russian Arctic, similar to present day conditions. Different from this situation, past glacial and stadial periods experienced a substantial decrease in the abundance of Bacteria and Archaea. This trend can also be confirmed for the community of methanogenic archaea that were highly abundant and diverse during warm and particularly wet conditions. For the terrestrial permafrost, a direct effect of the temperature on the microbial communities is likely. In contrast, it is suggested that the temperature rise in scope of the glacial-interglacial climate variations led to an increase of the primary production in the Arctic lake setting, as can be seen in the corresponding biogenic silica distribution. The availability of this algae-derived carbon is suggested to be a driver for the observed pattern in the microbial abundance. This work demonstrates the effect of climate changes on the community composition of methanogenic archae. Methanosarcina-related species were abundant throughout the Russian Arctic and were able to adapt to changing environmental conditions. In contrast, members of Methanocellales and Methanomicrobiales were not able to adapt to past climate changes. This PhD thesis provides first evidence that past climatic warming led to an increased abundance of microbial communities in the Arctic, closely linked to the cycling of carbon and methane production. With the predicted climate warming, it may, therefore, be anticipated that extensive amounts of microbial communities will develop. Increasing temperatures in the Arctic will affect the temperature sensitive parts of the current microbiological communities, possibly leading to a suppression of cold adapted species and the prevalence of methanogenic archaea that tolerate or adapt to increasing temperatures. These changes in the composition of methanogenic archaea will likely increase the methane production potential of high latitude terrestrial regions, changing the Arctic from a carbon sink to a source.
Lamprophyre sind porphyrische, aus Mantelschmelzen gebildete Gesteine, die meist in Form von Gängen auftreten. Sie zeichnen sich durch auffällige und charakteristische texturelle, chemische und mineralogische Eigenschaften aus. Als ehemalige Mantelschmelzen liefern sie Information sowohl über Bedingungen der Schmelzbildung im Mantel als auch über geodynamische Prozesse, die zu metasomatischer Veränderung des Mantels geführt haben. Im Saxothuringikum Mitteleuropas, am Nordrand des Böhmischen Massivs, gibt es zahlreiche Lamprophyrvorkommen, die hier zur Charakterisierung der Mantelentwicklung während der variszischen Orogenese dienen. Die vorliegende Arbeit befaßt sich mit den mineralogischen, geochemischen und isotopischen (Sr-Nd-Pb) Signaturen von spätvariszischen kalkalkalischen Lamprophyren, von postvariszischen ultramafischen Lamprophyren, von Alkalibasalten der Lausitz und, zum Vergleich, von prävariszischen Gabbros. Darüberhinaus nutzt die Arbeit Lithium-Isotopensignaturen kombiniert mit Sr-Nd-Pb–Isotopendaten spätvariszischer kalkalkalischer Lamprophyre aus drei variszischen Domänen (Erzgebirge, Lausitz, Sudeten) zur Erkundung der lokalen Mantelüberprägungen während der variszischen Orogenese.
Low molecular weight organic acids (LMWOAs) are important nutrients for microbes. However, most LMWOAs do not exist freely in the environment but are bound to macromolecular organic matter, e.g. kerogen, lignite and coal. During burial and geological maturation of sedimentary macromolecular organic matter biological and abiological processes promote the liberation of LMWOAs into the surrounding sediment. Through this process, microbes in sedimentary subsurface environments are supplied with essential nutrients. To estimate the feedstock potential of buried macromolecular organic matter to many environments it is important to determine the amount of LMWOAs that are bound to such a matrix. However, high-pressure and high temperature are a key feature of deep subsurface environments, and these physical parameters have a profound influence on chemical reaction kinetics. Therefore it is essential for the estimation of the feedstock potential to generate high-pressure and high temperature for the liberation of LMWOAs to recreate true in-situ conditions. This work presents a newly developed, inexpensive incubation system for biological and geological samples. It allows the application of high-pressure and high temperature as well as a subsampling of the liquid phase without loss of pressure, thereby not disturbing the on-going processes. When simulating the liberation of LMWOAs from sedimentary organic matter, the newly developed incubation system produces more realistic results than other extraction systems like Soxhlet. The extraction products remain in the extraction medium throughout the extraction, influencing the chemical conditions of the extraction medium. Sub-bituminous coal samples from New Zealand as well as lignite samples from Germany were extracted at elevated temperature (90˚C) and pressure (5 MPa). The main LMWOAs released from these low rank coals were formate, acetate and oxalate. Extraction efficiency was increased by two to four times for formate, acetate and oxalate in comparison to existing extraction methods without pressurisation and with demineralised water. This shows the importance of pressure for the simulation of true in-situ conditions and suggests that the amount of bioavailable LMWOAs is higher than previously thought. With the increase in carbon capture and storage (CCS) and the enhanced recovery of oil and gas (EOR/EGR), more and more CO2 becomes injected into the underground. However, the effects of elevated concentrations of carbon dioxide on sedimentary organic matter are rarely investigated. As the incuabtion system allows the manipulation of the composition and partial pressure of dissolved gasses, the effect of highly gas-enriched (CO2, CO2/SO2, CO2/NO2; to simulate flue gas conditions) waters on the extraction yield of LMWOAs from macromolecular organic matter was evaluated. For sub-bituminous coal the concentrations of all LMWAOs decreased upon the addition of gas, irrespective of its composition, whereas for lignite formate always and acetate mostly increased, while oxalate decreased. This suggests an positive effect on the nutrient supply for the subsurface microbiota of lignite layers, as formate and acetate are the most common LMWOAs used for microbial metabolism. In terrestrial mud volcanoes (TMVs), sedimentary material is rapidly ascending from great depth to the surface. Therefore LMWOAs that were produced from buried macromolecular organic matter at depth are also brought up to the surface, and fuel heterotrophic microbial ecosystems at the surface. TMVs represent geochemically and microbiologically diverse habitats, which are supplied with organic substrates and electron acceptors from deep-seated hydrocarbon-generating systems and intersected shallow aquifers, respectively. The main electron donor in TMVs in Azerbaijan is sulphate, and microbial sulphate reduction leads to the production of a wide range of reduced sulphur species that are key players in several biological processes. In our study we estimated the effect of LMWOAs on the sulphur metabolising activity of microorganims in TMVs from Azerbaijan. The addition of a mixture of volatile fatty acids containing acetate and other LMWOAs showed significant positive response to the sulphate reduction rate (SRR) of samples of several mud volcanoes. Further investigations on the temperature dependency of the SRR and the characterisation of thermophilic sulphate-reducing bacteria (SRB) showed a connection between the deep hot subsurface and the surface.
Antarctic glacier forfields are extreme environments and pioneer sites for ecological succession. The Antarctic continent shows microbial community development as a natural laboratory because of its special environment, geographic isolation and little anthropogenic influence. Increasing temperatures due to global warming lead to enhanced deglaciation processes in cold-affected habitats and new terrain is becoming exposed to soil formation and accessible for microbial colonisation. This study aims to understand the structure and development of glacier forefield bacterial communities, especially how soil parameters impact the microorganisms and how those are adapted to the extreme conditions of the habitat. To this effect, a combination of cultivation experiments, molecular, geophysical and geochemical analysis was applied to examine two glacier forfields of the Larsemann Hills, East Antarctica. Culture-independent molecular tools such as terminal restriction length polymorphism (T-RFLP), clone libraries and quantitative real-time PCR (qPCR) were used to determine bacterial diversity and distribution. Cultivation of yet unknown species was carried out to get insights in the physiology and adaptation of the microorganisms. Adaptation strategies of the microorganisms were studied by determining changes of the cell membrane phospholipid fatty acid (PLFA) inventory of an isolated bacterium in response to temperature and pH fluctuations and by measuring enzyme activity at low temperature in environmental soil samples. The two studied glacier forefields are extreme habitats characterised by low temperatures, low water availability and small oligotrophic nutrient pools and represent sites of different bacterial succession in relation to soil parameters. The investigated sites showed microbial succession at an early step of soil formation near the ice tongue in comparison to closely located but rather older and more developed soil from the forefield. At the early step the succession is influenced by a deglaciation-dependent areal shift of soil parameters followed by a variable and prevalently depth-related distribution of the soil parameters that is driven by the extreme Antarctic conditions. The dominant taxa in the glacier forefields are Actinobacteria, Acidobacteria, Proteobacteria, Bacteroidetes, Cyanobacteria and Chloroflexi. The connection of soil characteristics with bacterial community structure showed that soil parameter and soil formation along the glacier forefield influence the distribution of certain phyla. In the early step of succession the relative undifferentiated bacterial diversity reflects the undifferentiated soil development and has a high potential to shift according to past and present environmental conditions. With progressing development environmental constraints such as water or carbon limitation have a greater influence. Adapting the culturing conditions to the cold and oligotrophic environment, the number of culturable heterotrophic bacteria reached up to 108 colony forming units per gram soil and 148 isolates were obtained. Two new psychrotolerant bacteria, Herbaspirillum psychrotolerans PB1T and Chryseobacterium frigidisoli PB4T, were characterised in detail and described as novel species in the family of Oxalobacteraceae and Flavobacteriaceae, respectively. The isolates are able to grow at low temperatures tolerating temperature fluctuations and they are not specialised to a certain substrate, therefore they are well-adapted to the cold and oligotrophic environment. The adaptation strategies of the microorganisms were analysed in environmental samples and cultures focussing on extracellular enzyme activity at low temperature and PLFA analyses. Extracellular phosphatases (pH 11 and pH 6.5), β-glucosidase, invertase and urease activity were detected in the glacier forefield soils at low temperature (14°C) catalysing the conversion of various compounds providing necessary substrates and may further play a role in the soil formation and total carbon turnover of the habitat. The PLFA analysis of the newly isolated species C. frigidisoli showed that the cold-adapted strain develops different strategies to maintain the cell membrane function under changing environmental conditions by altering the PLFA inventory at different temperatures and pH values. A newly discovered fatty acid, which was not found in any other microorganism so far, significantly increased at decreasing temperature and low pH and thus plays an important role in the adaption of C. frigidisoli. This work gives insights into the diversity, distribution and adaptation mechanisms of microbial communities in oligotrophic cold-affected soils and shows that Antarctic glacier forefields are suitable model systems to study bacterial colonisation in connection to soil formation.
In sedimentary basins, rock thermal conductivity can vary both laterally and vertically, thus altering the basin’s thermal structure locally and regionally. Knowledge of the thermal conductivity of geological formations and its spatial variations is essential, not only for quantifying basin evolution and hydrocarbon maturation processes, but also for understanding geothermal conditions in a geological setting. In conjunction with the temperature gradient, thermal conductivity represents the basic input parameter for the determination of the heat-flow density; which, in turn, is applied as a major input parameter in thermal modeling at different scales. Drill-core samples, which are necessary to determine thermal properties by laboratory measurements, are rarely available and often limited to previously explored reservoir formations. Thus, thermal conductivities of Mesozoic rocks in the North German Basin (NGB) are largely unknown. In contrast, geophysical borehole measurements are often available for the entire drilled sequence. Therefore, prediction equations to determine thermal conductivity based on well-log data are desirable. In this study rock thermal conductivity was investigated on different scales by (1) providing thermal-conductivity measurements on Mesozoic rocks, (2) evaluating and improving commonly applied mixing models which were used to estimate matrix and pore-filled rock thermal conductivities, and (3) developing new well-log based equations to predict thermal conductivity in boreholes without core control. Laboratory measurements are performed on sedimentary rock of major geothermal reservoirs in the Northeast German Basin (NEGB) (Aalenian, Rhaethian-Liassic, Stuttgart Fm., and Middle Buntsandstein). Samples are obtained from eight deep geothermal wells that approach depths of up to 2,500 m. Bulk thermal conductivities of Mesozoic sandstones range between 2.1 and 3.9 W/(m∙K), while matrix thermal conductivity ranges between 3.4 and 7.4 W/(m∙K). Local heat flow for the Stralsund location averages 76 mW/m², which is in good agreement to values reported previously for the NEGB. For the first time, in-situ bulk thermal conductivity is indirectly calculated for entire borehole profiles in the NEGB using the determined surface heat flow and measured temperature data. Average bulk thermal conductivity, derived for geological formations within the Mesozoic section, ranges between 1.5 and 3.1 W/(m∙K). The measurement of both dry- and water-saturated thermal conductivities allow further evaluation of different two-component mixing models which are often applied in geothermal calculations (e.g., arithmetic mean, geometric mean, harmonic mean, Hashin-Shtrikman mean, and effective-medium theory mean). It is found that the geometric-mean model shows the best correlation between calculated and measured bulk thermal conductivity. However, by applying new model-dependent correction, equations the quality of fit could be significantly improved and the error diffusion of each model reduced. The ‘corrected’ geometric mean provides the most satisfying results and constitutes a universally applicable model for sedimentary rocks. Furthermore, lithotype-specific and model-independent conversion equations are developed permitting a calculation of water-saturated thermal conductivity from dry-measured thermal conductivity and porosity within an error range of 5 to 10%. The limited availability of core samples and the expensive core-based laboratory measurements make it worthwhile to use petrophysical well logs to determine thermal conductivity for sedimentary rocks. The approach followed in this study is based on the detailed analyses of the relationships between thermal conductivity of rock-forming minerals, which are most abundant in sedimentary rocks, and the properties measured by standard logging tools. By using multivariate statistics separately for clastic, carbonate and evaporite rocks, the findings from these analyses allow the development of prediction equations from large artificial data sets that predict matrix thermal conductivity within an error of 4 to 11%. These equations are validated successfully on a comprehensive subsurface data set from the NGB. In comparison to the application of earlier published approaches formation-dependent developed for certain areas, the new developed equations show a significant error reduction of up to 50%. These results are used to infer rock thermal conductivity for entire borehole profiles. By inversion of corrected in-situ thermal-conductivity profiles, temperature profiles are calculated and compared to measured high-precision temperature logs. The resulting uncertainty in temperature prediction averages < 5%, which reveals the excellent temperature prediction capabilities using the presented approach. In conclusion, data and methods are provided to achieve a much more detailed parameterization of thermal models.
Metabolically active microbial communities are present in a wide range of subsurface environments. Techniques like enumeration of microbial cells, activity measurements with radiotracer assays and the analysis of porewater constituents are currently being used to explore the subsurface biosphere, alongside with molecular biological analyses. However, many of these techniques reach their detection limits due to low microbial activity and abundance. Direct measurements of microbial turnover not just face issues of insufficient sensitivity, they only provide information about a single specific process but in sediments many different process can occur simultaneously. Therefore, the development of a new technique to measure total microbial activity would be a major improvement. A new tritium-based hydrogenase-enzyme assay appeared to be a promising tool to quantify total living biomass, even in low activity subsurface environments. In this PhD project total microbial biomass and microbial activity was quantified in different subsurface sediments using established techniques (cell enumeration and pore water geochemistry) as well as a new tritium-based hydrogenase enzyme assay. By using a large database of our own cell enumeration data from equatorial Pacific and north Pacific sediments and published data it was shown that the global geographic distribution of subseafloor sedimentary microbes varies between sites by 5 to 6 orders of magnitude and correlates with the sedimentation rate and distance from land. Based on these correlations, global subseafloor biomass was estimated to be 4.1 petagram-C and ~0.6 % of Earth's total living biomass, which is significantly lower than previous estimates. Despite the massive reduction in biomass the subseafloor biosphere is still an important player in global biogeochemical cycles. To understand the relationship between microbial activity, abundance and organic matter flux into the sediment an expedition to the equatorial Pacific upwelling area and the north Pacific Gyre was carried out. Oxygen respiration rates in subseafloor sediments from the north Pacific Gyre, which are deposited at sedimentation rates of 1 mm per 1000 years, showed that microbial communities could survive for millions of years without fresh supply of organic carbon. Contrary to the north Pacific Gyre oxygen was completely depleted within the upper few millimeters to centimeters in sediments of the equatorial upwelling region due to a higher supply of organic matter and higher metabolic activity. So occurrence and variability of electron acceptors over depth and sites make the subsurface a complex environment for the quantification of total microbial activity. Recent studies showed that electron acceptor processes, which were previously thought to thermodynamically exclude each other can occur simultaneously. So in many cases a simple measure of the total microbial activity would be a better and more robust solution than assays for several specific processes, for example sulfate reduction rates or methanogenesis. Enzyme or molecular assays provide a more general approach as they target key metabolic compounds. Since hydrogenase enzymes are ubiquitous in microbes, the recently developed tritium-based hydrogenase radiotracer assay is applied to quantify hydrogenase enzyme activity as a parameter of total living cell activity. Hydrogenase enzyme activity was measured in sediments from different locations (Lake Van, Barents Sea, Equatorial Pacific and Gulf of Mexico). In sediment samples that contained nitrate, we found the lowest cell specific enzyme activity around 10^(-5) nmol H_(2) cell^(-1) d^(-1). With decreasing energy yield of the electron acceptor used, cell-specific hydrogenase activity increased and maximum values of up to 1 nmol H_(2) cell^(-1) d^(-1) were found in samples with methane concentrations of >10 ppm. Although hydrogenase activity cannot be converted directly into a turnover rate of a specific process, cell-specific activity factors can be used to identify specific metabolism and to quantify the metabolically active microbial population. In another study on sediments from the Nankai Trough microbial abundance and hydrogenase activity data show that both the habitat and the activity of subseafloor sedimentary microbial communities have been impacted by seismic activities. An increase in hydrogenase activity near the fault zone revealed that the microbial community was supplied with hydrogen as an energy source and that the microbes were specialized to hydrogen metabolism.