Refine
Has Fulltext
- no (17) (remove)
Year of publication
Document Type
- Article (17)
Language
- English (17)
Is part of the Bibliography
- yes (17)
Keywords
- Dead Sea Transform (2)
- tectonophysics (2)
- Central Andes (1)
- Deformation (1)
- Geodynamic modelling (1)
- Gravity modelling (1)
- LLSVPs (1)
- Lithospheric structure (1)
- Numerical modelling (1)
- S receiver functions (1)
Institute
Plate tectonics is among the most important geological processes on Earth, but its emergence and evolution remain unclear. Here we extrapolate models of present-day plate tectonics to the past and propose that since about three billion years ago the rise of continents and the accumulation of sediments at continental edges and in trenches has provided lubrication for the stabilization of subduction and has been crucial in the development of plate tectonics on Earth. We conclude that the two largest surface erosion and subduction lubrication events occurred after the Palaeoproterozoic Huronian global glaciations (2.45 to 2.2 billion years ago), leading to the formation of the Columbia supercontinent, and after the Neoproterozoic ‘snowball’ Earth glaciations (0.75 to 0.63 billion years ago). The snowball Earth event followed the ‘boring billion’—a period of reduced plate tectonic activity about 1.75 to 0.75 billion years ago that was probably caused by a shortfall of sediments in trenches—and it kick-started the modern episode of active plate tectonics.
We present a new three-dimensional density model of the Central Andes characterizing the structure and composition of the lithosphere together with a geodynamic simulation subjected to continental intraplate shortening. The principal aim of this study is to assess the link between heterogeneities in the lithosphere and different deformation patterns and styles along the orogen-foreland system of the Central Andes. First, we performed a 3D integration of new geological and geophysical data with previous models through forward modelling of Bouguer anomalies. Subsequently, a geodynamic model was set-up and parametrized from the previously obtained 3D structure and composition. We do not find a unambigous correlation between the resulting density configuration and terrane boundaries proposed by other authors. Our models reproduce the observed Bouguer anomaly and deformation patterns in the foreland. We find that thin-skinned deformation in the Subandean fold-and thrust belt is controlled by a thick sedimentary layer and coeval underthrusting of thin crust of the foreland beneath the thick crust of the Andean Plateau. In the adjacent thick-skinned deformation province of the inverted Cretaceous extensional Santa Barbara System sedimentary strata are much thinner and crustal thickness transitions from greater values in the Andean to a more reduced thickness in the foreland. Our results show that deformation processes occur where the highest gradients of lithospheric strength are present between the orogen and the foreland, thus suggesting a spatial correlation between deformation and lithospheric strength.
Effects of upper mantle heterogeneities on the lithospheric stress field and dynamic topography
(2018)
The orientation and tectonic regime of the observed crustal/lithospheric stress field contribute to our knowledge of different deformation processes occurring within the Earth's crust and lithosphere. In this study, we analyze the influence of the thermal and density structure of the upper mantle on the lithospheric stress field and topography. We use a 3-D lithosphere–asthenosphere numerical model with power-law rheology, coupled to a spectral mantle flow code at 300 km depth. Our results are validated against the World Stress Map 2016 (WSM2016) and the observation-based residual topography. We derive the upper mantle thermal structure from either a heat flow model combined with a seafloor age model (TM1) or a global S-wave velocity model (TM2). We show that lateral density heterogeneities in the upper 300 km have a limited influence on the modeled horizontal stress field as opposed to the resulting dynamic topography that appears more sensitive to such heterogeneities. The modeled stress field directions, using only the mantle heterogeneities below 300 km, are not perturbed much when the effects of lithosphere and crust above 300 km are added. In contrast, modeled stress magnitudes and dynamic topography are to a greater extent controlled by the upper mantle density structure. After correction for the chemical depletion of continents, the TM2 model leads to a much better fit with the observed residual topography giving a good correlation of 0.51 in continents, but this correction leads to no significant improvement of the fit between the WSM2016 and the resulting lithosphere stresses. In continental regions with abundant heat flow data, TM1 results in relatively small angular misfits. For example, in western Europe the misfit between the modeled and observation-based stress is 18.3°. Our findings emphasize that the relative contributions coming from shallow and deep mantle dynamic forces are quite different for the lithospheric stress field and dynamic topography.
Lithospheric plates move over the low-viscosity asthenosphere balancing several forces, which generate plate motions. We use a global 3-D lithosphere-asthenosphere model (SLIM3D) with visco-elasto-plastic rheology coupled to a spectral model of mantle flow at 300 km depth to quantify the influence of intra-plate friction and asthenospheric viscosity on plate velocities. We account for the brittle-ductile deformation at plate boundaries (yield stress) using a plate boundary friction coefficient to predict the present-day plate motion and net rotation of the lithospheric plates. Previous modeling studies have suggested that small friction coefficients (mu < 0.1, yield stress similar to 100 MPa) can lead to plate tectonics in models of mantle convection. Here we show that in order to match the observed present-day plate motion and net rotation, the frictional parameter must be less than 0.05. We obtain a good fit with the magnitude and orientation of the observed plate velocities (NUVEL-1A) in a no-net-rotation (NNR) reference frame with mu < 0.05 and a minimum asthenosphere viscosity of similar to 5 . 10(19) Pas to 10(20) Pas. Our estimates of net rotation (NR) of the lith-osphere suggest that amplitudes similar to 0.1-0.2 (degrees/Ma), similar to most observation-based estimates, can be obtained with asthenosphere viscosity cutoff values of similar to 10(19) Pas to 5 . 10(19) Pas and friction coefficients mu < 0.05.
Pre-existing weakness zones in the lithosphere such as transform faults/fracture zones and extinct mid-oceanic ridges have been suggested to facilitate subduction initiation in an intra-oceanic environment. Here, we propose that the additional forcing coming from the mantle suction flow is required to trigger the conversion of a fracture zone/transform fault into a converging plate boundary. This suction flow can be induced either from the slab remnants of former converging plate boundaries or/and from slabs of neighbouring active subduction zones. Using 2-D coupled thermo-mechanical models, we show that a sufficiently strong mantle flow is able to convert a fracture zone/transform fault into a subduction zone. However, this process is feasible only if the fracture zone/transform fault is very close to the mid-oceanic ridge. Our numerical model results indicate that time of subduction initiation depends on the velocity, domain size and location of mantle suction flow and age of the oceanic plate.
Mantle Flow as a Trigger for Subduction Initiation: A Missing Element of the Wilson Cycle Concept
(2017)
The classical Wilson Cycle concept, describing repeated opening and closing of ocean basins, hypothesizes spontaneous conversion of passive continental margins into subduction zones. This process, however, is impeded by the high strength of passive margins, and it has never occurred in Cenozoic times. Here using thermomechanical models, we show that additional forcing, provided by mantle flow, which is induced by neighboring subduction zones and midmantle slab remnants, can convert a passive margin into a subduction zone. Models suggest that this is a long-term process, thus explaining the lack of Cenozoic examples. We speculate that new subduction zones may form in the next few tens of millions of years along the Argentine passive margin and the U.S. East Coast. Mantle suction force can similarly trigger subduction initiation along large oceanic fracture zones. We propose that new subduction zones will preferentially originate where subduction zones were active in the past, thus explaining the remarkable colocation of subduction zones during at least the last 400 Myr.
Here, we study the 3-D subduction initiation process induced by the interaction between a hot thermochemical mantle plume and oceanic lithosphere using thermo-mechanical viscoplastic finite difference marker-in-cell models. Our numerical modeling results show that self-sustaining subduction is induced by plume-lithosphere interaction when the plume is sufficiently buoyant, the oceanic lithosphere is sufficiently old and the plate is weak enough to allow the buoyant plume to. pass through it. Subduction initiation occurs following penetration of the lithosphere by the hot plume and the downward displacement of broken, nearly circular segments of lithosphere (proto-slabs) as a result of partially molten plume rocks overriding the proto-slabs. Our experiments show four different deformation regimes in response to plume-lithosphere interaction: a) self-sustaining subduction initiation, in which subduction becomes self-sustaining; b) frozen subduction initiation, in which subduction stops at shallow depths; c) slab break-off, in which the subducting circular slab breaks off soon after formation; and d) plume underplating, in which the plume does not pass through the lithosphere and instead spreads beneath it (i.e., failed subduction initiation). These regimes depend on several parameters, such as the size, composition, and temperature of the plume, the brittle/plastic strength and age of the oceanic lithosphere, and the presence/absence of lithospheric heterogeneities. The results show that subduction initiates and becomes self-sustaining when the lithosphere is older than 10 Myr and the non dimensional ratio of the plume buoyancy force and lithospheric strength above the plume is higher than approximately 2. The outcomes of our numerical experiments are applicable for subduction initiation in the modern and Precambrian Earth and for the origin of plume-related corona structures on Venus. (C) 2016 Elsevier B.V. All rights reserved.
We study segregation of the subducted oceanic crust (OC) at the core-mantle boundary and its ability to accumulate and form large thermochemical piles (such as the seismically observed Large Low Shear Velocity Provinces (LLSVPs)). Our high-resolution numerical simulations of thermochemical mantle convection suggest that the longevity of LLSVPs for up to three billion years, and possibly longer, can be ensured by a balance in the rate of segregation of high-density OC material to the core-mantle boundary (CMB) and the rate of its entrainment away from the CMB by mantle upwellings. For a range of parameters tested in this study, a large-scale compositional anomaly forms at the CMB, similar in shape and size to the LLSVPs. Neutrally buoyant thermochemical piles formed by mechanical stirringwhere thermally induced negative density anomaly is balanced by the presence of a fraction of dense anomalous materialbest resemble the geometry of LLSVPs. Such neutrally buoyant piles tend to emerge and survive for at least 3Gyr in simulations with quite different parameters. We conclude that for a plausible range of values of density anomaly of OC material in the lower mantleit is likely that it segregates to the CMB, gets mechanically mixed with the ambient material, and forms neutrally buoyant large-scale compositional anomalies similar in shape to the LLSVPs.
The Earth's biggest magmatic events are believed to originate from massive melting when hot mantle plumes rising from the lowermost mantle reach the base of the lithosphere. Classical models predict large plume heads that cause kilometre-scale surface uplift, and narrow (100 km radius) plume tails that remain in the mantle after the plume head spreads below the lithosphere. However, in many cases, such uplifts and narrow plume tails are not observed. Here using numerical models, we show that the issue can be resolved if major mantle plumes contain up to 15-20% of recycled oceanic crust in a form of dense eclogite, which drastically decreases their buoyancy and makes it depth dependent. We demonstrate that, despite their low buoyancy, large enough thermochemical plumes can rise through the whole mantle causing only negligible surface uplift. Their tails are bulky (4200 km radius) and remain in the upper mantle for 100 millions of years.