Refine
Year of publication
Language
- English (23)
Is part of the Bibliography
- yes (23) (remove)
Keywords
- Soil moisture (3)
- Agricultural field (2)
- Paraíba (2)
- cosmic-ray neutron sensing (2)
- family farming (2)
- global sensitivity analysis (2)
- nested vulnerabilities (2)
- semi-arid regions (2)
- vulnerability indices (2)
- 2.5-D model (1)
Measuring the variability of incoming neutrons locally would be usefull for the cosmic-ray neutron sensing (CRNS) method. As the measurement of high energy neutrons is not so easy, alternative particles can be considered for such purpose. Among them, muons are particles created from the same cascade of primary cosmic-ray fluxes that generate neutrons at the ground. In addition, they can be easily detected by small and relatively inexpensive detectors. For these reasons they could provide a suitable local alternative to incoming corrections based on remote neutron monitor data. The reported measurements demonstrated that muon detection system can detect incoming cosmic-ray variations locally. Furthermore the precision of this measurement technique is considered adequate for many CRNS applications.
Climate change heavily impacts smallholder farming worldwide. Cross-scale vulnerability assessment has a high potential to identify nested measures for reducing vulnerability of smallholder farmers. Despite their high practical value, there are currently only limited examples of cross-scale assessments. The presented study aims at assessing the vulnerability of smallholder farmers in the Northeast of Brazil across three scales: regional, farm and field scale. In doing so, it builds on existing vulnerability indices and compares results between indices at the same scale and across scales. In total, six independent indices are tested, two at each scale. The calculated indices include social, economic and ecological indicators, based on municipal statistics, meteorological data, farm interviews and soil analyses. Subsequently, indices and overlapping indicators are normalized for intra- and cross-scale comparison. The results show considerable differences between indices across and within scales. They indicate different activities to reduce vulnerability of smallholder farmers. Major shortcomings arise from the conceptual differences between the indices. We therefore recommend the development of hierarchical indices, which are adapted to local conditions and contain more overlapping indicators for a better understanding of the nested vulnerabilities of smallholder farmers.
Climate change heavily impacts smallholder farming worldwide. Cross-scale vulnerability assessment has a high potential to identify nested measures for reducing vulnerability of smallholder farmers. Despite their high practical value, there are currently only limited examples of cross-scale assessments. The presented study aims at assessing the vulnerability of smallholder farmers in the Northeast of Brazil across three scales: regional, farm and field scale. In doing so, it builds on existing vulnerability indices and compares results between indices at the same scale and across scales. In total, six independent indices are tested, two at each scale. The calculated indices include social, economic and ecological indicators, based on municipal statistics, meteorological data, farm interviews and soil analyses. Subsequently, indices and overlapping indicators are normalized for intra- and cross-scale comparison. The results show considerable differences between indices across and within scales. They indicate different activities to reduce vulnerability of smallholder farmers. Major shortcomings arise from the conceptual differences between the indices. We therefore recommend the development of hierarchical indices, which are adapted to local conditions and contain more overlapping indicators for a better understanding of the nested vulnerabilities of smallholder farmers.
An effective strategy for combining variance- and distribution-based global sensitivity analysis
(2020)
We present a new strategy for performing global sensitivity analysis capable to estimate main and interaction effects from a generic sampling design. The new strategy is based on a meaningful combination of varianceand distribution-based approaches. The strategy is tested on four analytic functions and on a hydrological model. Results show that the analysis is consistent with the state-of-the-art Saltelli/Jansen formula but to better quantify the interaction effect between the input factors when the output distribution is skewed. Moreover, the estimation of the sensitivity indices is much more robust requiring a smaller number of simulations runs. Specific settings and alternative methods that can be integrated in the new strategy are also discussed. Overall, the strategy is considered as a new simple and effective tool for performing global sensitivity analysis that can be easily integrated in any environmental modelling framework.
In the field of hydrological modeling, many alternative representations of natural processes exist. Choosing specific process formulations when building a hydrological model is therefore associated with a high degree of ambiguity and subjectivity. In addition, the numerical integration of the underlying differential equations and parametrization of model structures influence model performance. Identifiability analysis may provide guidance by constraining the a priori range of alternatives based on observations. In this work, a flexible simulation environment is used to build an ensemble of semidistributed, process-based hydrological model configurations with alternative process representations, numerical integration schemes, and model parametrizations in an integrated manner. The flexible simulation environment is coupled with an approach for dynamic identifiability analysis. The objective is to investigate the applicability of the framework to identify the most adequate model. While an optimal model configuration could not be clearly distinguished, interesting results were obtained when relating model identifiability with hydro-meteorological boundary conditions. For instance, we tested the Penman-Monteith and Shuttleworth & Wallace evapotranspiration models and found that the former performs better under wet and the latter under dry conditions. Parametrization of model structures plays a dominant role as it can compensate for inadequate process representations and poor numerical solvers. Therefore, it was found that numerical solvers of high order of accuracy do often, though not necessarily, lead to better model performance. The proposed coupled framework proved to be a straightforward diagnostic tool for model building and hypotheses testing and shows potential for more in-depth analysis of process implementations and catchment functioning.
Spinning up large-scale coupled surface-subsurface numerical models can be a time and resource consuming task. If an uninformed initial condition is chosen, the spin-up can easily require 20 years of repeated simulations on high-performance computing machines. In this paper we compare the classical approach of starting from a fixed shallow depth to groundwater (here 3 m) with three more informed approaches for the definition of initial conditions in the spin up. In the first of these three approaches, we start from a known-steady state groundwater table, calculated with a 2-D groundwater model and the yearly net recharge, and combine it with an unsaturated zone that assumes hydrostatic conditions. In the second approach, we start from the same groundwater table combined with vertical profiles in the unsaturated zone with uniform vertical flow identical to the groundwater recharge. In the third approach we calculate a dynamic steady state from a simplified subsurface model combining a transient 2-D groundwater model with a limited number of 1-D transient unsaturated zone columns on top. Results for spinning-up a 3-D Parflow-CLM model using the different initial conditions show that large gains can be made by considering states in groundwater and the vadose zone that are consistent, i.e. where groundwater recharge and the vertical flux in the vadose zone agree. By this, the spin-up time was reduced from about 10 years to about 3 years of simulated time. In the light of seasonal fluctuations of net recharge, using the transient approach showed more stable results.
In Germany, the irrigation sector accounts for only 1% of water use. In recent years, however, this sector has attracted more attention due to the occurrence of severe drought periods. Irrigation scheduling systems could support adaptation strategies but little is known about current providers, performance and users. In this study we aimed to depict the current situation of the existence and functioning of irrigation scheduling systems available in Germany. Six methods were identified and assessed based on direct interviews with end-users and a comparative analysis. The results showed a positive feedback from the users. However, the recommendations were rarely implemented, while only the seasonal irrigation requirement was considered to support actual water abstraction. These results were corroborated by the comparative analysis. Five of the six irrigation scheduling systems estimated the seasonal irrigation amount consistently, while wider differences were found by looking at the irrigation season and at the number of irrigations. Overall, it is found that irrigation support systems are valuable tools for supporting adaptation strategies to fast changes in agro-environmental conditions. However, specific assessments based on real measurements should be considered in order to improve the performance of the systems and provide more consistent support to end-users. (c) 2019 John Wiley & Sons, Ltd.
The improvement of process representations in hydrological models is often only driven by the modelers' knowledge and data availability. We present a comprehensive comparison between two hydrological models of different complexity that is developed to support (1) the understanding of the differences between model structures and (2) the identification of the observations needed for model assessment and improvement. The comparison is conducted on both space and time and by aggregating the outputs at different spatiotemporal scales. In the present study, mHM, a process‐based hydrological model, and ParFlow‐CLM, an integrated subsurface‐surface hydrological model, are used. The models are applied in a mesoscale catchment in Germany. Both models agree in the simulated river discharge at the outlet and the surface soil moisture dynamics, lending their supports for some model applications (drought monitoring). Different model sensitivities are, however, found when comparing evapotranspiration and soil moisture at different soil depths. The analysis supports the need of observations within the catchment for model assessment, but it indicates that different strategies should be considered for the different variables. Evapotranspiration measurements are needed at daily resolution across several locations, while highly resolved spatially distributed observations with lower temporal frequency are required for soil moisture. Finally, the results show the impact of the shallow groundwater system simulated by ParFlow‐CLM and the need to account for the related soil moisture redistribution. Our comparison strategy can be applied to other models types and environmental conditions to strengthen the dialog between modelers and experimentalists for improving process representations in Earth system models.
Cosmic-ray neutron sensing (CRNS) is a promising non-invasive technique to estimate snow water equivalent (SWE) over large areas. In contrast to preliminary studies focusing on shallow snow conditions (SWE <130 mm), more recently the method was shown experimentally to be sensitive also to deeper snowpacks providing the basis for its use at mountain experimental sites. However, hysteretic neutron response has been observed for complex snow cover including patchy snow-free areas. In the present study we aimed to understand and support the experimental findings using a comprehensive neutron modeling approach. Several simulations have been set up in order to disentangle the effect on the signal of different land surface characteristics and to reproduce multiple observations during periods of snow melt and accumulation. To represent the actual land surface heterogeneity and the complex snow cover, the model used data from terrestrial laser scanning. The results show that the model was able to accurately reproduce the CRNS signal and particularly the hysteresis effect during accumulation and melting periods. Moreover, the sensor footprint was found to be anisotropic and affected by the spatial distribution of liquid water and snow as well as by the topography of the nearby mountains. Under fully snow-covered conditions the CRNS is able to accurately estimate SWE without prior knowledge about snow density profiles or other spatial anomalies. These results provide new insights into the characteristics of the detected neutron signal in complex terrain and support the use of CRNS for long-term snow monitoring in high elevated mountain environments.
Cool farm tool water
(2018)
The agricultural sector accounts for 70% of all water consumption and poses great pressure on ground water resources. Therefore, evaluating agricultural water consumption is highly important as it allows supply chain actors to identify practices which are associated with unsustainable water use, which risk depleting current water resources and impacting future production. However, these assessments are often not feasible for crop producers as data, models and experiments are required in order to conduct them. This work introduces a new on-line agricultural water use assessment tool that provides the water footprint and irrigation requirements at field scale based on an enhanced FAO56 approach combined with a global climate, crop and soil databases. This has been included in the Cool Farm Tool - an online tool which already provides metrics for greenhouse gas emissions and biodiversity impacts and therefore allows for a more holistic assessment of environmental sustainability in farming and agricultural supply chains. The model is tested against field scale and state level water footprint data providing good results. The tool provides a practical, reliable way to assess agricultural water use, and offers a means to engage growers and stakeholders in identifying efficient water management practices. (C) 2018 The Authors. Published by Elsevier Ltd.