Refine
Has Fulltext
- yes (55) (remove)
Year of publication
- 2022 (55) (remove)
Document Type
- Doctoral Thesis (27)
- Postprint (23)
- Article (3)
- Habilitation Thesis (1)
- Master's Thesis (1)
Is part of the Bibliography
- yes (55)
Keywords
- functional traits (3)
- AFLP (2)
- Bewegungsökologie (2)
- GPS (2)
- Koexistenz (2)
- MSAP (2)
- Transkriptionsfaktoren (2)
- animal personality (2)
- antibody (2)
- coexistence (2)
Institute
- Institut für Biochemie und Biologie (55) (remove)
An important goal in biotechnology and (bio-) medical research is the isolation of single cells from a heterogeneous cell population. These specialised cells are of great interest for bioproduction, diagnostics, drug development, (cancer) therapy and research. To tackle emerging questions, an ever finer differentiation between target cells and non-target cells is required. This precise differentiation is a challenge for a growing number of available methods.
Since the physiological properties of the cells are closely linked to their morphology, it is beneficial to include their appearance in the sorting decision. For established methods, this represents a non addressable parameter, requiring new methods for the identification and isolation of target cells. Consequently, a variety of new flow-based methods have been developed and presented in recent years utilising 2D imaging data to identify target cells within a sample. As these methods aim for high throughput, the devices developed typically require highly complex fluid handling techniques, making them expensive while offering limited image quality.
In this work, a new continuous flow system for image-based cell sorting was developed that uses dielectrophoresis to precisely handle cells in a microchannel. Dielectrophoretic forces are exerted by inhomogeneous alternating electric fields on polarisable particles (here: cells). In the present system, the electric fields can be switched on and off precisely and quickly by a signal generator. In addition to the resulting simple and effective cell handling, the system is characterised by the outstanding quality of the image data generated and its compatibility with standard microscopes. These aspects result in low complexity, making it both affordable and user-friendly.
With the developed cell sorting system, cells could be sorted reliably and efficiently according to their cytosolic staining as well as morphological properties at different optical magnifications. The achieved purity of the target cell population was up to 95% and about 85% of the sorted cells could be recovered from the system. Good agreement was achieved between the results obtained and theoretical considerations. The achieved throughput of the system was up to 12,000 cells per hour. Cell viability studies indicated a high biocompatibility of the system.
The results presented demonstrate the potential of image-based cell sorting using dielectrophoresis. The outstanding image quality and highly precise yet gentle handling of the cells set the system apart from other technologies. This results in enormous potential for processing valuable and sensitive cell samples.
Wild bee species are important pollinators in agricultural landscapes. However, population decline was reported over the last decades and is still ongoing. While agricultural intensification is a major driver of the rapid loss of pollinating species, transition zones between arable fields and forest or grassland patches, i.e., agricultural buffer zones, are frequently mentioned as suitable mitigation measures to support wild bee populations and other pollinator species. Despite the reported general positive effect, it remains unclear which amount of buffer zones is needed to ensure a sustainable and permanent impact for enhancing bee diversity and abundance. To address this question at a pollinator community level, we implemented a process-based, spatially explicit simulation model of functional bee diversity dynamics in an agricultural landscape. More specifically, we introduced a variable amount of agricultural buffer zones (ABZs) at the transition of arable to grassland, or arable to forest patches to analyze the impact on bee functional diversity and functional richness. We focused our study on solitary bees in a typical agricultural area in the Northeast of Germany. Our results showed positive effects with at least 25% of virtually implemented agricultural buffer zones. However, higher amounts of ABZs of at least 75% should be considered to ensure a sufficient increase in Shannon diversity and decrease in quasi-extinction risks. These high amounts of ABZs represent effective conservation measures to safeguard the stability of pollination services provided by solitary bee species. As the model structure can be easily adapted to other mobile species in agricultural landscapes, our community approach offers the chance to compare the effectiveness of conservation measures also for other pollinator communities in future.
Environmental pollution by microplastics has become a severe problem in terrestrial and aquatic ecosystems and, according to actual prognoses, problems will further increase in the future. Therefore, assessing and quantifying the risk for the biota is crucial. Standardized short-term toxicological procedures as well as methods quantifying potential toxic effects over the whole life span of an animal are required. We studied the effect of the microplastic polystyrene on the survival and reproduction of a common freshwater invertebrate, the rotifer Brachionus calyciflorus, at different timescales. We used pristine polystyrene spheres of 1, 3, and 6 µm diameter and fed them to the animals together with food algae in different ratios ranging from 0 to 50% nonfood particles. As a particle control, we used silica to distinguish between a pure particle effect and a plastic effect. After 24 h, no toxic effect was found, neither with polystyrene nor with silica. After 96 h, a toxic effect was detectable for both particle types. The size of the particles played a negligible role. Studying the long-term effect by using life table experiments, we found a reduced reproduction when the animals were fed with 3 µm spheres together with similar-sized food algae. We conclude that the fitness reduction is mainly driven by the dilution of food by the nonfood particles rather than by a direct toxic effect.
Predation is a strong species interaction causing severe harm or death to prey. Thus, prey species have evolved various defence strategies to minimize predation risk, which may be immediate (e.g., a change in behaviour) or transgenerational (morphological defence structures). We studied the behaviour of two strains of a rotiferan prey (Brachionus calyciflorus) that differ in their ability to develop morphological defences in response to their predator Asplanchna brightwellii. Using video analysis, we tested: (a) if two strains differ in their response to predator presence and predator cues when both are undefended; (b) whether defended individuals respond to live predators or their cues; and (c) if the morphological defence (large spines) per se has an effect on the swimming behaviour. We found a clear increase in swimming speed for both undefended strains in predator presence. However, the defended specimens responded neither to the predator presence nor to their cues, showing that they behave indifferently to their predator when they are defended. We did not detect an effect of the spines on the swimming behaviour. Our study demonstrates a complex plastic behaviour of the prey, not only in the presence of their predator, but also with respect to their defence status.
Synthetische Transkriptionsfaktoren bestehen wie natürliche Transkriptionsfaktoren aus einer DNA-Bindedomäne, die sich spezifisch an die Bindestellensequenz vor dem Ziel-Gen anlagert, und einer Aktivierungsdomäne, die die Transkriptionsmaschinerie rekrutiert, sodass das Zielgen exprimiert wird. Der Unterschied zu den natürlichen Transkriptionsfaktoren ist, sowohl dass die DNA-Bindedomäne als auch die Aktivierungsdomäne wirtsfremd sein können und dadurch künstliche Stoffwechselwege im Wirt, größtenteils chemisch, induziert werden können. Optogenetische synthetische Transkriptionsfaktoren, die hier entwickelt wurden, gehen einen Schritt weiter. Dabei ist die DNA-Bindedomäne nicht mehr an die Aktivierungsdomäne, sondern mit dem Blaulicht-Photorezeptor CRY2 gekoppelt. Die Aktivierungsdomäne wurde mit dem Interaktionspartner CIB1 fusioniert. Unter Blaulichtbestrahlung dimerisieren CRY2 und CIB1 und damit einhergehend die beiden Domänen, sodass ein funktionsfähiger Transkriptionsfaktor entsteht. Dieses System wurde in die Saccharomyces cerevisiae genomisch integriert. Verifiziert wurde das konstruierte System mit Hilfe des Reporters yEGFP, welcher durchflusszytometrisch detektiert werden konnte. Es konnte gezeigt werden, dass die yEGFP Expression variabel gestaltet werden kann, indem unterschiedlich lange Blaulichtimpulse ausgesendet wurden, die DNA-Bindedomäne, die Aktivierungsdomäne oder die Anzahl der Bindestellen, an dem sich die DNA-Bindedomäne anlagert, verändert wurden. Um das System für industrielle Anwendungen attraktiv zu gestalten, wurde das System vom Deepwell-Maßstab auf Photobioreaktor-Maßstab hochskaliert. Außerdem erwies sich das Blaulichtsystem sowohl im Laborstamm YPH500 als auch im industriell oft verwendeten Hefestamm CEN.PK als funktional. Des Weiteren konnte ein industrierelevante Protein ebenso mit Hilfe des verifizierten Systems exprimiert werden. Schlussendlich konnte in dieser Arbeit das etablierte Blaulicht-System erfolgreich mit einem Rotlichtsystem kombiniert werden, was zuvor noch nicht beschrieben wurde.
Plant metabolism is the main process of converting assimilated carbon to different crucial compounds for plant growth and therefore crop yield, which makes it an important research topic. Although major advances in understanding genetic principles contributing to metabolism and yield have been made, little is known about the genetics responsible for trait variation or canalization although the concepts have been known for a long time. In light of a growing global population and progressing climate change, understanding canalization of metabolism and yield seems ever-more important to ensure food security. Our group has recently found canalization metabolite quantitative trait loci (cmQTL) for tomato fruit metabolism, showing that the concept of canalization applies on metabolism. In this work two approaches to investigate plant metabolic canalization and one approach to investigate yield canalization are presented.
In the first project, primary and secondary metabolic data from Arabidopsis thaliana and Phaseolus vulgaris leaf material, obtained from plants grown under different conditions was used to calculate cross-environment coefficient of variations or fold-changes of metabolite levels per genotype and used as input for genome wide association studies. While primary metabolites have lower CV across conditions and show few and mostly weak associations to genomic regions, secondary metabolites have higher CV and show more, strong metabolite to genome associations. As candidate genes, both potential regulatory genes as well as metabolic genes, can be found, albeit most metabolic genes are rarely directly related to the target metabolites, suggesting a role for both potential regulatory mechanisms as well as metabolic network structure for canalization of metabolism.
In the second project, candidate genes of the Solanum lycopersicum cmQTL mapping are selected and CRISPR/Cas9-mediated gene-edited tomato lines are created, to validate the genes role in canalization of metabolism. Obtained mutants appeared to either have strong aberrant developmental phenotypes or appear wild type-like. One phenotypically inconspicuous mutant of a pantothenate kinase, selected as candidate for malic acid canalization shows a significant increase of CV across different watering conditions. Another such mutant of a protein putatively involved in amino acid transport, selected as candidate for phenylalanine canalization shows a similar tendency to increased CV without statistical significance. This potential role of two genes involved in metabolism supports the hypothesis of structural relevance of metabolism for its own stability.
In the third project, a mutant for a putative disulfide isomerase, important for thylakoid biogenesis, is characterized by a multi-omics approach. The mutant was characterized previously in a yield stability screening and showed a variegated leaf phenotype, ranging from green leaves with wild type levels of chlorophyll over differently patterned variegated to completely white leaves almost completely devoid of photosynthetic pigments. White mutant leaves show wild type transcript levels of photosystem assembly factors, with the exception of ELIP and DEG orthologs indicating a stagnation at an etioplast to chloroplast transition state. Green mutant leaves show an upregulation of these assembly factors, possibly acting as overcompensation for partially defective disulfide isomerase, which seems sufficient for proper chloroplast development as confirmed by a wild type-like proteome. Likely as a result of this phenotype, a general stress response, a shift to a sink-like tissue and abnormal thylakoid membranes, strongly alter the metabolic profile of white mutant leaves. As the severity and pattern of variegation varies from plant to plant and may be effected by external factors, the effect on yield instability, may be a cause of a decanalized ability to fully exploit the whole leaf surface area for photosynthetic activity.
Extreme habitats often harbor specific communities that differ substantially from non-extreme habitats. In many cases, these communities are characterized by archaea, bacteria and protists, whereas the number of species of metazoa and higher plants is relatively low. In extremely acidic habitats, mostly prokaryotes and protists thrive, and only very few metazoa thrive, for example, rotifers. Since many studies have investigated the physiology and ecology of individual species, there is still a gap in research on direct, trophic interactions among extremophiles. To fill this gap, we experimentally studied the trophic interactions between a predatory protist (Actinophrys sol, Heliozoa) and its prey, the rotifers Elosa woralli and Cephalodella sp., the ciliate Urosomoida sp. and the mixotrophic protist Chlamydomonas acidophila (a green phytoflagellate, Chlorophyta). We found substantial predation pressure on all animal prey. High densities of Chlamydomonas acidophila reduced the predation impact on the rotifers by interfering with the feeding behaviour of A. sol. These trophic relations represent a natural case of intraguild predation, with Chlamydomonas acidophila being the common prey and the rotifers/ciliate and A. sol being the intraguild prey and predator, respectively. We further studied this intraguild predation along a resource gradient using Cephalodella sp. as the intraguild prey. The interactions among the three species led to an increase in relative rotifer abundance with increasing resource (Chlamydomonas) densities. By applying a series of laboratory experiments, we revealed the complexity of trophic interactions within a natural extremophilic community.
High-throughput proteomics approaches have resulted in large-scale protein–protein interaction (PPI) networks that have been employed for the prediction of protein complexes. However, PPI networks contain false-positive as well as false-negative PPIs that affect the protein complex prediction algorithms. To address this issue, here we propose an algorithm called CUBCO+ that: (1) employs GO semantic similarity to retain only biologically relevant interactions with a high similarity score, (2) based on link prediction approaches, scores the false-negative edges, and (3) incorporates the resulting scores to predict protein complexes. Through comprehensive analyses with PPIs from Escherichia coli, Saccharomyces cerevisiae, and Homo sapiens, we show that CUBCO+ performs as well as the approaches that predict protein complexes based on recently introduced graph partitions into biclique spanned subgraphs and outperforms the other state-of-the-art approaches. Moreover, we illustrate that in combination with GO semantic similarity, CUBCO+ enables us to predict more accurate protein complexes in 36% of the cases in comparison to CUBCO as its predecessor.
This dataset comprises tree inventories and damage assessments performed in Namibia's semi-arid Zambezi Region. Data were sampled in savannas and savanna woodlands along steep gradients of elephant population densities to capture the effects of those (and other) disturbances on individual-level and stand-level aboveground woody biomass (AGB). The dataset contains raw data on dendrometric measures and processed data on specific wood density (SWD), woody aboveground biomass, and biomass losses through disturbance impacts. Allometric proxies (height, canopy diameters, and in adult trees also stem circumferences) were recorded for n = 6,179 tree and shrub individuals. Wood samples were taken for each encountered species to measure specific wood density.
These measurements have been used to estimate woody aboveground biomass via established allometric models, advanced through our improved methodologies and workflows that accounted for tree and shrub architecture shaped by disturbance impacts. To this end, we performed a detailed damage assessment on each woody individual in the field. In addition to estimations of standing biomass, our new method also delivered data on biomass losses to different disturbance agents (elephants, fire, and others) on the level of plant individuals and stands.
The data presented here have been used within a study published with Ecological Indicators (Kindermann et al., 2022) to evaluate the benefits of our improved methodology in comparison to a standard reference method of aboveground biomass estimations. Additionally, it has been employed in a study on carbon storage and sequestration in vegetation and soils (Sandhage-Hofmann et al., 2021).
The raw data of dendrometric measurements can be subjected to other available allometric models for biomass estimation. The processed data can be used to analyze disturbance impacts on woody aboveground biomass, or for regional carbon storage estimates. The data on species-specific wood density can be used for application to other dendrometric datasets to (re-) estimate biomass through allometric models requiring wood density. It can further be used for plant functional trait analyses.
Fiber-based microfluidics has undergone many innovative developments in recent years, with exciting examples of portable, cost-effective and easy-to-use detection systems already being used in diagnostic and analytical applications. In water samples, Legionella are a serious risk as human pathogens. Infection occurs through inhalation of aerosols containing Legionella cells and can cause severe pneumonia and may even be fatal. In case of Legionella contamination of water-bearing systems or Legionella infection, it is essential to find the source of the contamination as quickly as possible to prevent further infections. In drinking, industrial and wastewater monitoring, the culture-based method is still the most commonly used technique to detect Legionella contamination. In order to improve the laboratory-dependent determination, the long analysis times of 10-14 days as well as the inaccuracy of the measured values in colony forming units (CFU), new innovative ideas are needed. In all areas of application, for example in public, commercial or private facilities, rapid and precise analysis is required, ideally on site.
In this PhD thesis, all necessary single steps for a rapid DNA-based detection of Legionella were developed and characterized on a fiber-based miniaturized platform. In the first step, a fast, simple and device-independent chemical lysis of the bacteria and extraction of genomic DNA was established. Subsequently, different materials were investigated with respect to their non-specific DNA retention. Glass fiber filters proved to be particularly suitable, as they allow recovery of the DNA sample from the fiber material in combination with dedicated buffers and exhibit low autofluorescence, which was important for fluorescence-based readout.
A fiber-based electrophoresis unit was developed to migrate different oligonucleotides within a fiber matrix by application of an electric field. A particular advantage over lateral flow assays is the targeted movement, even after the fiber is saturated with liquid. For this purpose, the entire process of fiber selection, fiber chip patterning, combination with printed electrodes, and testing of retention and migration of different DNA samples (single-stranded, double-stranded and genomic DNA) was performed. DNA could be pulled across the fiber chip in an electric field of 24 V/cm within 5 minutes, remained intact and could be used for subsequent detection assays e.g., polymerase chain reaction (PCR) or fluorescence in situ hybridization (FISH). Fiber electrophoresis could also be used to separate DNA from other components e.g., proteins or cell lysates or to pull DNA through multiple layers of the glass microfiber. In this way, different fragments experienced a moderate, size-dependent separation. Furthermore, this arrangement offers the possibility that different detection reactions could take place in different layers at a later time. Electric current and potential measurements were collected to investigate the local distribution of the sample during migration. While an increase in current signal at high concentrations indicated the presence of DNA samples, initial experiments with methylene blue stained DNA showed a temporal sequence of signals, indicating sample migration along the chip.
For the specific detection of a Legionella DNA, a FISH-based detection with a molecular beacon probe was tested on the glass microfiber. A specific region within the 16S rRNA gene of Legionella spp. served as a target. For this detection, suitable reaction conditions and a readout unit had to be set up first. Subsequently, the sensitivity of the probe was tested with the reverse complementary target sequence and the specificity with several DNA fragments that differed from the target sequence. Compared to other DNA sequences of similar length also found in Legionella pneumophila, only the target DNA was specifically detected on the glass microfiber. If a single base exchange is present or if two bases are changed, the probe can no longer distinguish between the DNA targets and non-targets. An analysis with this specificity can be achieved with other methods such as melting point determination, as was also briefly indicated here. The molecular beacon probe could be dried on the glass microfiber and stored at room temperature for more than three months, after which it was still capable of detecting the target sequence. Finally, the feasibility of fiber-based FISH detection for genomic Legionella DNA was tested. Without further processing, the probe was unable to detect its target sequence in the complex genomic DNA. However, after selecting and application of appropriate restriction enzymes, specific detection of Legionella DNA against other aquatic pathogens with similar fragment patterns as Acinetobacter haemolyticus was possible.