Refine
Year of publication
Language
- English (47)
Is part of the Bibliography
- yes (47)
Keywords
- ultrafast X-ray diffraction (2)
- Detector modelling and simulations II (electric fields, charge transport, multiplication and induction, pulse formation, electron emission, etc) (1)
- Energy-dispersive Laue diffraction (1)
- Interaction of radiation with matter (1)
- Solid state detectors (1)
- X-ray diffraction (1)
- X-ray imaging (1)
- X-ray spectroscopy (1)
- X-ray switching (1)
- acoustic waves (1)
Institute
Temperature dependent energy-dispersive X-ray diffraction and magnetic study of Fe/Al interface
(2007)
In situ temperature dependent energy-dispersive structural and magnetic study of electron beam evaporated Fe/Al multilayer sample (MLS) has been investigated. The structural studies show the formation of an intermixed FeAl transition layer of a few nanometers thick at the interface during deposition, which on annealing at 300 degrees C transforms to B2FeAl intermetallic phase. Magnetization decreases with increase in temperature and drops to minimum above 300 degrees C due to increase in anti-ferromagnetic interlayer coupling and formation of nonmagnetic FeAl phase at the interface. The Curie temperature (T-c) is found to be 288 degrees C and is much less than that of bulk bcc Fe.
Experiments at the bending magnet beamline at BESSY II (EDR beamline) profit from the excellent coherence properties of third generation synchrotron sources. Considering the exponentially decaying incident spectrum, and because no optical elements are installed except slits and vacuum windows, coherence experiments can be performed between 5 keV < E < 15 keV. First, the energy dependence of spatial coherence properties were determined measuring diffraction at single and double pinholes. Next, the coherent white radiation was used to probe the morphology of thin films in reflection geometry. The recorded intensity maps (reflectivity versus sample position) provide speckle patterns which reveal the locally varying sample morphology. Setting the incident angle, alpha(i), smaller or larger than the critical angle of total external reflection, alpha(c), one should be able to separate the surface height profile from the subsurface density modulation of a sample. The validity of this approach is verified at the example of reciprocal space maps taken from a polymer surface where we could reconstruct the lateral height profile from speckle data. (C) 2004 Elsevier B.V. All rights reserved
This paper discusses the experimental realisation of two types of X-ray interferometer based on pinhole diffraction. In both interferometers the beam splitter was a thin metal foil containing micrometer pinholes to divide the incident X-ray wave into two coherent waves. The interference pattern was studied using an energy-dispersive detector to simultaneously investigate in a large spectral range the diffraction properties of the white synchrotron radiation. For a highly absorbing pinhole mask the interference fringes from the classical Young's double-pinhole experiment were recorded and the degree of coherence of X-rays could be determined. In the case of low absorption of the metal foil at higher X-ray energies (> 15 keV) the interference pattern of a point diffraction interferometer was observed using the same set-up. The spectral refraction index of the metal foil was determined