Refine
Year of publication
Document Type
- Article (14)
- Doctoral Thesis (1)
Language
- English (15) (remove)
Is part of the Bibliography
- yes (15)
Keywords
- Diodenlaser (1)
- Frequenzkonversion (1)
- Kopplung (1)
- Laser resonators (1)
- Modellierung (1)
- diode-laser-arrays (1)
- diode-lasers (1)
- external cavities (1)
- externe Resonatoren (1)
- incoherent light (1)
Institute
High cw power using an external cavity for spectral beam combining of diode laser-bar emission
(2006)
In extension to known concepts of wavelength-multiplexing diode laser arrays, a new external cavity is presented. The setup simultaneously improves the beam quality of each single emitter of a standard 25 emitter broad-area stripe laser bar and spectrally superimposes the 25 beams into one. By using this external resonator in an "off-axis" arrangement, beam qualities of M-slow(2) < 14 and M-fast(2) < 3 with optical powers in excess of 10 W in cw operation are obtained.
Stripe-array diode lasers naturally operate in an anti-phase supermode. This produces a sharp double lobe far field at angles ña depending on the period of the array. In this paper a 40 emitter gain guided stripe-array laterally coupled by off-axis filtered feedback is investigated experimentally and numerically. We predict theoretically and confirm experimentally that at doubled feedback angle 2a a stable higher order supermode exists with twice the number of emitters per array period. The theoretical model is based on time domain traveling wave equations for optical fields coupled to the carrier density equation taking into account diffusion of carriers. Feedback from the external reflector is modeled using Fresnel integration.
Stripe-array diode lasers naturally operate in an anti-phase supermode. This produces a sharp double lobe far field at angles +/-alpha depending on the period of the array. In this paper a 40 emitter gain guided stripe-array laterally coupled by off-axis filtered feedback is investigated experimentally and numerically. We predict theoretically and confirm experimentally that at doubled feedback angle 2 alpha a stable higher order supermode exists with twice the number of emitters per array period. The theoretical model is based on time domain traveling wave equations for optical fields coupled to the carrier density equation taking into account diffusion of carriers. Feedback from the external reflector is modeled using Fresnel integration.
A huge number of applications require coherent radiation in the visible spectral range. Since diode lasers are very compact and efficient light sources, there exists a great interest to cover these applications with diode laser emission. Despite modern band gap engineering not all wavelengths can be accessed with diode laser radiation. Especially in the visible spectral range between 480 nm and 630 nm no emission from diode lasers is available, yet. Nonlinear frequency conversion of near-infrared radiation is a common way to generate coherent emission in the visible spectral range. However, radiation with extraordinary spatial temporal and spectral quality is required to pump frequency conversion. Broad area (BA) diode lasers are reliable high power light sources in the near-infrared spectral range. They belong to the most efficient coherent light sources with electro-optical efficiencies of more than 70%. Standard BA lasers are not suitable as pump lasers for frequency conversion because of their poor beam quality and spectral properties. For this purpose, tapered lasers and diode lasers with Bragg gratings are utilized. However, these new diode laser structures demand for additional manufacturing and assembling steps that makes their processing challenging and expensive. An alternative to BA diode lasers is the stripe-array architecture. The emitting area of a stripe-array diode laser is comparable to a BA device and the manufacturing of these arrays requires only one additional process step. Such a stripe-array consists of several narrow striped emitters realized with close proximity. Due to the overlap of the fields of neighboring emitters or the presence of leaky waves, a strong coupling between the emitters exists. As a consequence, the emission of such an array is characterized by a so called supermode. However, for the free running stripe-array mode competition between several supermodes occurs because of the lack of wavelength stabilization. This leads to power fluctuations, spectral instabilities and poor beam quality. Thus, it was necessary to study the emission properties of those stripe-arrays to find new concepts to realize an external synchronization of the emitters. The aim was to achieve stable longitudinal and transversal single mode operation with high output powers giving a brightness sufficient for efficient nonlinear frequency conversion. For this purpose a comprehensive analysis of the stripe-array devices was done here. The physical effects that are the origin of the emission characteristics were investigated theoretically and experimentally. In this context numerical models could be verified and extended. A good agreement between simulation and experiment was observed. One way to stabilize a specific supermode of an array is to operate it in an external cavity. Based on mathematical simulations and experimental work, it was possible to design novel external cavities to select a specific supermode and stabilize all emitters of the array at the same wavelength. This resulted in stable emission with 1 W output power, a narrow bandwidth in the range of 2 MHz and a very good beam quality with M²<1.5. This is a new level of brightness and brilliance compared to other BA and stripe-array diode laser systems. The emission from this external cavity diode laser (ECDL) satisfied the requirements for nonlinear frequency conversion. Furthermore, a huge improvement to existing concepts was made. In the next step newly available periodically poled crystals were used for second harmonic generation (SHG) in single pass setups. With the stripe-array ECDL as pump source, more than 140 mW of coherent radiation at 488 nm could be generated with a very high opto-optical conversion efficiency. The generated blue light had very good transversal and longitudinal properties and could be used to generate biphotons by parametric down-conversion. This was feasible because of the improvement made with the infrared stripe-array diode lasers due to the development of new physical concepts.
A new approach for efficient second-harmonic generation using diode lasers is presented. The experimental setup is based on a tapered amplifier operated in a ring resonator that is coupled to a miniaturized enhancement ring resonator containing a periodically poled lithium niobate crystal. Frequency locking of the diode laser emission to the resonance frequency of the enhancement cavity is realized purely optically, resulting in stable, single-frequency operation. Blue light at 488 nm with an output power of 310 mW is generated with an optical-to-optical conversion efficiency of 18%.
Quasi-monolithic ring resonator for efficient frequency doubling of an external cavity diode laser
(2010)
A quasi-monolithic second-harmonic-generation ring resonator assembled with miniaturized components is presented. The ring contains a 10-mm-long bulk periodically poled lithium niobate crystal for second-harmonic generation, four plane mirrors and two gradient-index lenses. All parts are mounted on a glass substrate with an overall size of 19.5 mmx8.5 mmx4 mm. As pump source a broad-area laser diode operated in an external resonator with Littrow arrangement is utilized. This external cavity diode laser provides near diffraction limited, narrow-bandwidth emission with an optical output power of 450 mW at a wavelength of 976 nm. Locking of the diode laser emission to the resonance frequency of the ring cavity was achieved by an optical self-injection locking technique. With this setup more than 126 mW of diffraction-limited blue light at 488 nm could be generated. The opto-optical conversion efficiency was 28% and a wall plug efficiency better than 5.5% could be achieved.
Multi-wavelength, high spatial brightness operation of a phase-locked stripe-array diode laser
(2012)
Stable continuous wave multi-wavelength operation of a stripe-array diode laser with an externalcavity spectral beam combining geometry is presented. In this setup each emitter of the stripe-array is forced to operate at a different wavelength, which leads to a decoupling between the usually phase-locked emitters. With a reflective diffraction grating with a period of 300 lines per mm, 33 equidistant laser lines around a center wavelength of 978 nm were realized, spanning a spectral range of 26 nm. With this novel approach near-diffraction limited emission with a beam quality of M (2) < 1.2 and an output power of 450 mW was achieved. This laser light source can be used for applications requiring low temporal but high spatial coherence.
Fundamental optics such as lenses and prisms work by applying phase shifts of several radians to incoming light, and rapid control of such phase shifts is crucial to telecommunications. However, large, controllable optical phase shifts have remained elusive for isolated quantum systems. We have used a single trapped atomic ion to induce and measure a large optical phase shift of 1.3 +/- 0.1 radians in light scattered by the atom. Spatial interferometry between the scattered light and unscattered illumination light enables us to isolate the phase shift in the scattered component. The phase shift achieves the maximum value allowed by atomic theory over the accessible range of laser frequencies, pointing out new opportunities in microscopy and nanophotonics. Single-atom phase shifts of this magnitude open up new quantum information protocols, in particular long-range quantum phase-shift-keying cryptography. DOI: 10.1103/PhysRevLett.110.113605
Two-photon excited fluorescence (TPEF) is a standard technique in modern microscopy(1), but is still affected by photodamage to the probe. It has been proposed that TPEF can be enhanced using entangled photons(2,3), but this has proven challenging. Recently, it was shown that some features of entangled photons can be mimicked with thermal light, which finds application in ghost imaging(4), subwavelength lithography(5) and metrology(6). Here, we use true thermal light from a superluminescent diode to demonstrate TPEF that is enhanced compared to coherent light, using two common fluorophores and luminescent quantum dots, which suit applications in imaging and microscopy. We find that the TPEF rate is directly proportional to the measured(7) degree of second-order coherence, as predicted by theory. Our results show that photon bunching in thermal light can be exploited in two-photon microscopy, with the photon statistic providing a new degree of freedom.
Stabilized multi-wavelength emission from a single emitter broad area diode laser (BAL) is realized by utilizing an external cavity with a spectral beam combining architecture. Self-organized emitters that are equidistantly spaced across the slow axis are enforced by the spatially distributed wavelength selectivity of the external cavity. This resulted in an array like near-field emission although the BAL is physically a single emitter without any epitaxial sub-structuring and only one electrical contact. Each of the self-organized emitters is operated at a different wavelength and the emission is multiplexed into one spatial mode with near-diffraction limited beam quality. With this setup, multi-line emission of 31 individual spectral lines centered around and a total spectral width of 3.6 nm is realized with a 1000 mu m wide BAL just above threshold. To the best of our knowledge, this is the first demonstration of such a self-organization of emitters by optical feedback utilizing a spectral beam combining architecture.