Refine
Has Fulltext
- no (12)
Document Type
- Article (11)
- Monograph/Edited Volume (1)
Language
- English (12) (remove)
Is part of the Bibliography
- yes (12)
Keywords
Institute
Rotations of the principal stress axes are observed as a result of fluid injection into reservoirs. We use a generic, fully coupled 3-D thermo-hydro-mechanical model to investigate systematically the dependence of this stress rotation on different reservoir properties and injection scenarios. We find that permeability, injection rate, and initial differential stress are the key factors, while other reservoir properties only play a negligible role. In particular, we find that thermal effects do not significantly contribute to stress rotations. For reservoir types with usual differential stress and reservoir treatment the occurrence of significant stress rotations is limited to reservoirs with a permeability of less than approximately 10(-12)m(2). Higher permeability effectively prevents stress rotations to occur. Thus, according to these general findings, the observed principal stress axes rotation can be used as a proxy of the initial differential stress provided that rock permeability and fluid injection rate are known a priori.
Several hydraulic fracturing tests were performed in boreholes located in central Hungary in order to determine the in-situ stress for a geological site investigation. At a depth of about 540m, the observed pressure versus time curves in mica schist with low dip angle foliation shows atypical pressure versus time results. After each pressurization cycle, the fracture breakdown pressure in the first fracturing cycle is lower than the refracturing or reopening pressure in the subsequent pressurizations. It is assumed that the viscosity of the drilling mud and observed foliation of the mica schist have a significant influence on the pressure values. In order to study this problem, numerical modeling was performed using the distinct element code particle flow code, which has been proven to be a valuable tool to investigate rock engineering problems such as hydraulic fracturing. The two-dimensional version of the code applied in this study can simulate hydro-mechanically coupled fluid flow in crystalline rock with low porosity and pre-existing fractures. In this study, the effect of foliation angle and fluid viscosity on the peak pressure is tested. The atypical characteristics of the pressure behaviour are interpreted so that mud with higher viscosity penetrates the sub-horizontal foliation plane, blocks the plane of weakness and makes the partly opened fracture tight and increase the pore pressure which decreases slowly with time. We see this viscous blocking effect as one explanation for the observed increase in fracture reopening pressure in subsequent pressurization cycles.