Refine
Year of publication
Document Type
- Article (32)
- Monograph/Edited Volume (10)
- Other (3)
- Doctoral Thesis (2)
- Postprint (2)
Is part of the Bibliography
- yes (49) (remove)
Keywords
- Genetic programming (3)
- Dynamical systems (2)
- Hydraulic models (2)
- Hydraulic networks (2)
- Maximum entropy method (2)
- Pipe networks (2)
- Probability (2)
- Synchronization control (2)
- Water distribution systems (2)
- free shear layers (2)
Many previous studies have shown that the turbulent mixing layer under periodic forcing tends to adopt a lock-on state, where the major portion of the fluctuations in the flow are synchronized at the forcing frequency. The goal of this experimental study is to apply closed-loop control in order to provoke the lock-on state, using information from the flow itself. We aim to determine the range of frequencies for which the closed-loop control can establish the lock-on, and what mechanisms are contributing to the selection of a feedback frequency. In order to expand the solution space for optimal closed-loop control laws, we use the genetic programming control (CPC) framework. The best closed-loop control laws obtained by CPC are analysed along with the associated physical mechanisms in the mixing layer flow. The resulting closed-loop control significantly outperforms open-loop forcing in terms of robustness to changes in the free-stream velocities. In addition, the selection of feedback frequencies is not locked to the most amplified local mode, but rather a range of frequencies around it.
We present a novel experimental setup to investigate two-dimensional thermal convection in a freestanding thin liquid film. Such films can be produced in a controlled way on the scale of 5-1000 nm. Our primary goal is to investigate convection patterns and the statistics of reversals in Rayleigh-Benard convection with varying aspect ratio. Additionally, questions regarding the physics of liquid films under controlled conditions can be investigated, like surface forces, or stability under varying thermodynamical parameters. The film is suspended in a frame which can be adjusted in height and width to span an aspect ratio range of Gamma = 0.16-10. The top and bottom frame elements can be set to specific temperature within T = 15 degrees C to 55 degrees C. A thickness to area ratio of approximately 108 enables only two-dimensional fluid motion in the time scales relevant for turbulent motion. The chemical composition of the film is well-defined and optimized for film stability and reproducibility and in combination with carefully controlled ambient parameters allows the comparison to existing experimental and numerical data. Published by AIP Publishing.
We study the modeling and prediction of dynamical systems based on conventional models derived from measurements. Such algorithms are highly desirable in situations where the underlying dynamics are hard to model from physical principles or simplified models need to be found. We focus on symbolic regression methods as a part of machine learning. These algorithms are capable of learning an analytically tractable model from data, a highly valuable property. Symbolic regression methods can be considered as generalized regression methods. We investigate two particular algorithms, the so-called fast function extraction which is a generalized linear regression algorithm, and genetic programming which is a very general method. Both are able to combine functions in a certain way such that a good model for the prediction of the temporal evolution of a dynamical system can be identified. We illustrate the algorithms by finding a prediction for the evolution of a harmonic oscillator based on measurements, by detecting an arriving front in an excitable system, and as a real-world application, the prediction of solar power production based on energy production observations at a given site together with the weather forecast.
A synchronization experiment on two mutual interacting organ pipes is compared with a theoretical model which takes into account the coupling mechanisms by the underlying first principles of fluid mechanics and aeroacoustics. The focus is on the Arnold-tongue, a mathematical object in the parameter space of detuning and coupling strength which quantitatively captures the interaction of the synchronized sound sources. From the experiment, a nonlinearly shaped Arnold-tongue is obtained, describing the coupling of the synchronized pipe-pipe system. This is in contrast to the linear shaped Arnold-tongue found in a preliminary experiment of the coupled system pipe-loudspeaker. To understand the experimental result, a coarse-grained model of two nonlinear coupled self-sustained oscillators is developed. The model, integrated numerically, is in very good agreement with the synchronization experiment for separation distances of the pipes in the far field and in the intermediate field. The methods introduced open the door for a deeper understanding of the fundamental processes of sound generation and the coupling mechanisms on mutual interacting acoustic oscillators. (C) 2016 Acoustical Society of America.
We propose a novel cluster-based reduced-order modelling (CROM) strategy for unsteady flows. CROM combines the cluster analysis pioneered in Gunzburger's group (Burkardt, Gunzburger & Lee, Comput. Meth. Appl. Mech. Engng, vol. 196, 2006a, pp. 337-355) and transition matrix models introduced in fluid dynamics in Eckhardt's group (Schneider, Eckhardt & Vollmer, Phys. Rev. E, vol. 75, 2007, art. 066313). CROM constitutes a potential alternative to POD models and generalises the Ulam-Galerkin method classically used in dynamical systems to determine a finite-rank approximation of the Perron-Frobenius operator. The proposed strategy processes a time-resolved sequence of flow snapshots in two steps. First, the snapshot data are clustered into a small number of representative states, called centroids, in the state space. These centroids partition the state space in complementary non-overlapping regions (centroidal Voronoi cells). Departing from the standard algorithm, the probabilities of the clusters are determined, and the states are sorted by analysis of the transition matrix. Second, the transitions between the states are dynamically modelled using a Markov process. Physical mechanisms are then distilled by a refined analysis of the Markov process, e. g. using finite-time Lyapunov exponent (FTLE) and entropic methods. This CROM framework is applied to the Lorenz attractor (as illustrative example), to velocity fields of the spatially evolving incompressible mixing layer and the three-dimensional turbulent wake of a bluff body. For these examples, CROM is shown to identify non-trivial quasi-attractors and transition processes in an unsupervised manner. CROM has numerous potential applications for the systematic identification of physical mechanisms of complex dynamics, for comparison of flow evolution models, for the identification of precursors to desirable and undesirable events, and for flow control applications exploiting nonlinear actuation dynamics.
Many previous studies have shown that the turbulent mixing layer under periodic forcing tends to adopt a lock-on state, where the major portion of the fluctuations in the flow are synchronized at the forcing frequency. The goal of this experimental study is to apply closed-loop control in order to provoke the lock-on state, using information from the flow itself. We aim to determine the range of frequencies for which the closed-loop control can establish the lock-on, and what mechanisms are contributing to the selection of a feedback frequency. In order to expand the solution space for optimal closed-loop control laws, we use the genetic programming control (CPC) framework. The best closed-loop control laws obtained by CPC are analysed along with the associated physical mechanisms in the mixing layer flow. The resulting closed-loop control significantly outperforms open-loop forcing in terms of robustness to changes in the free-stream velocities. In addition, the selection of feedback frequencies is not locked to the most amplified local mode, but rather a range of frequencies around it.
Mixing layer manipulation experiment from open-loop forcing to closed-loop machine learning control
(2015)
Ordinary differential equations (ODEs) have been studied for centuries as a means to model complex dynamical processes from the real world. Nevertheless, their application to sound synthesis has not yet been fully exploited. In this article we present a systematic approach to sound synthesis based on first-order complex and real ODEs. Using simple time-dependent and nonlinear terms, we illustrate the mapping between ODE coefficients and physically meaningful control parameters such as pitch, pitch bend, decay rate, and attack time. We reveal the connection between nonlinear coupling terms and frequency modulation, and we discuss the implications of this scheme in connection with nonlinear synthesis. The ability to excite a first-order complex ODE with an external input signal is also examined; stochastic or impulsive signals that are physically or synthetically produced can be presented as input to the system, offering additional synthesis possibilities, such as those found in excitation/filter synthesis and filter-based modal synthesis.
Small- and large-scale characterization and mixing properties in a thermally driven thin liquid film
(2015)
We study aqueous, freestanding, thin films stabilized by a surfactant with respect to mixing and dynamical systems properties. With this special setup, a two-dimensional fluid can be realized experimentally. The physics of the system involves a complex interplay of thermal convection and interface and gravitational forces. Methodologically, we characterize the system using two classical dynamical systems properties: Lyapunov exponents and entropies. Our experimental setup produces convection with two stable eddies by applying a temperature gradient in one spot that yields weakly turbulent mixing. From dynamical systems theory, one expects a relation of entropies, Lyapunov exponents, a prediction with little experimental support. We can confirm the corresponding statements experimentally, on different scales using different methods. On the small scale the motion and deformation of fluid filaments of equal size (color imaging velocimetry) are used to compute Lyapunov exponents. On the large scale, entropy is computed by tracking the left-right motion of the center fluid jet at the separatrix between the two convection rolls. We thus combine here dynamical systems methods with a concrete application of mixing in a nanoscale freestanding thin film.