Refine
Has Fulltext
- yes (5)
Year of publication
- 2008 (5) (remove)
Document Type
- Doctoral Thesis (5) (remove)
Language
- English (5) (remove)
Is part of the Bibliography
- no (5) (remove)
Keywords
- ATP (1)
- Apyrase (1)
- CAP (1)
- Carbonate (1)
- Carbonates (1)
- Deichbruch (1)
- Diagenese (1)
- Diagenesis (1)
- Flood (1)
- Gefährdungskarten (1)
This study investigated the warm-temperate to tropical shallow-water Miocene carbonates of the Perfugas basin (Anglona area), northern Sardinia, Italy (Central Mediterranean). The aim of this study was to identify and document the existence and significance of early diagenesis in this carbonate system, especially the diagenetic history, which reflects the diagenetic potential in terms of skeletal mineralogy. The motivation behind the present study was to investigate the role that early cementation has over facies stabilization linked to differences in biotic associations in shallow-water settings. Principal to this was to unravel the amount, kind and distribution of early cements in this type of carbonates, in order to complement previous studies, and hence acquire a more global perspective on non-tropical carbonate settings. The shallow-buried Sedini Limestone Unit was investigated for variations on early diagenetic features, as well as for the type of biotic association, and oxygen and carbon stable isotope stratigraphy. Results showed, that particularly at the Perfugas basin (< 15 km2), which evolves in time from a ramp into a steep-flanked platform, shallow-water facies are characterized by a “transitional” type of biotic association. The biotic assemblages change gradually over time from a heterozoan-rich into a photozoan-rich depositional system. This transition implies a change in the depositional environmental control factors such as temperature. It is considered that sedimentation took place under warm-temperate waters, which shifted to more warmer or tropical waters through time. Moreover, it was noticed that along with these changes, marine early syn-depositional cements (high-Mg calcite), with particular fabrics (e.g. fibrous), gradually contributed to the early lithification of rocks, favoring a steepening of the platform relief. The major controls for the shift of the depositional geometry was triggered by the change of the type of biotic associations (carbonate factory), related with the shift towards warmer conditions, and the development of early marine cementation. The identification of the amount and distribution of different cement phases, porosities and early diagenetic features, within facies and stratigraphy, showed that diagenesis is differential along depth, and within the depositional setting. High-Mg calcite cements (micrite, fibrous and syntaxial inclusion-rich) are early syn-depositional, facies-related (shallow-water), predominant at the platform phase, and marine in origin. Low-Mg calcite cements (bladed, syntaxial inclusionpoor and blocky) are early to late post-depositional, non-facies related (shallow- to deep-water) and shallow-burial marine in origin. However, a particular difference exists when looking at the amount and distribution of low-Mg calcite bladed cements. They become richer in shallow-water facies at the platform phase, suggesting that the enrichment of bladed cementation is linked to the appearance of metastable grains (e.g. aragonite). In both depositional profiles, the development of secondary porosity is the product of fabric-selective dissolution of grains (aragonite, high-Mg calcite) and/or cements (syntaxial inclusion-rich). However, stratigraphy and stable isotopes (oxygen and carbon), indicate that the molds found at shallower facies located beneath, and close to stratigraphic boundaries, have been produced by the infiltration of meteoric-derived water, which caused recrystallization without calcite cementation. Away from these stratigraphic locations, shallow- and deep-water facies show molds, and recrystallization, as well as low-Mg calcite cementation, interpreted as occurring during burial of these sediments by marine waters. The main cement source is suggested to be aragonite. Our results indicate that the Sedini Limestone Unit was transformed in three different diagenetic environments (marine, meteoric and shallow-burial marine); however, the degree of transformation in each diagenetic environment differs in the heterozoan-dominated ramp from the photozoan-dominated platform. It is suggested that the sediments from the ramp follow a diagenetic pathway similar to their heterozoan counterparts (i.e. lack of marine cementation, and loss of primary porosity by compaction), and the sediments from the platform follow a diagenetic pathway similar to their photozoan counterparts (i.e. marine cementation occluding primary porosity). However, in this carbonate setting, cements are Mg-calcite, no meteoric cementation was produced, and secondary porosity at shallow-water facies of the platform phase is mostly open and preserved. Despite the temporal and transitional change in biotic associations, ramp and platform facies (shallow- to deep-water facies) showed an oxygen isotope record overprinted by diagenesis. Oxygen primary marine signatures were not found. It is believed that burial diagenesis (recrystallization and low-Mg calcite cementation) was the main reason. This was unexpected at the ramp, since heterozoan-rich carbonates can hold isotope values close to primary marine signals due to their low-Mg calcite original composition. Ramp and platform facies (shallow- to deep-water facies) showed a carbon isotope record that was less affected by diagenesis. However, only at deep-water facies, did the carbon record show positive values comparable with carbon primary marine signals. The positive carbon values were noticed with major frequency at the platform deep-water facies. Moreover, these values usually showed a covariant trend with the oxygen isotope record; even that the latter did not hold positive values. The main conclusion of this work is that carbonates, deposited under warm-temperate to tropical conditions, have a unique facies, diagenesis and chemostratigraphic expression, which is different from their cool-water heterozoan or warm-water photozoan counterparts, reflecting the “transitional” nature of biotic association.
Forests are a key resource serving a multitude of functions such as providing income to forest owners, supplying industries with timber, protecting water resources, and maintaining biodiversity. Recently much attention has been given to the role of forests in the global carbon cycle and their management for increased carbon sequestration as a possible mitigation option against climate change. Furthermore, the use of harvested wood can contribute to the reduction of atmospheric carbon through (i) carbon sequestration in wood products, (ii) the substitution of non-wood products with wood products, and (iii) through the use of wood as a biofuel to replace fossil fuels. Forest resource managers are challenged by the task to balance these multiple while simultaneously meeting economic requirements and taking into consideration the demands of stakeholder groups. Additionally, risks and uncertainties with regard to uncontrollable external variables such as climate have to be considered in the decision making process. In this study a scientific stakeholder dialogue with forest-related stakeholder groups in the Federal State of Brandenburg was accomplished. The main results of this dialogue were the definition of major forest functions (carbon sequestration, groundwater recharge, biodiversity, and timber production) and priority setting among them by the stakeholders using the pair-wise comparison technique. The impact of different forest management strategies and climate change scenarios on the main functions of forest ecosystems were evaluated at the Kleinsee management unit in south-east Brandenburg. Forest management strategies were simulated over 100 years using the forest growth model 4C and a wood product model (WPM). A current climate scenario and two climate change scenarios based on global circulation models (GCMs) HadCM2 and ECHAM4 were applied. The climate change scenario positively influenced stand productivity, carbon sequestration, and income. The impact on the other forest functions was small. Furthermore, the overall utility of forest management strategies were compared under the priority settings of stakeholders by a multi-criteria analysis (MCA) method. Significant differences in priority setting and the choice of an adequate management strategy were found for the environmentalists on one side and the more economy-oriented forest managers of public and private owned forests on the other side. From an ecological perspective, a conservation strategy would be preferable under all climate scenarios, but the business as usual management would also fit the expectations under the current climate. In contrast, a forest manager in public-owned forests or a private forest owner would prefer a management strategy with an intermediate thinning intensity and a high share of pine stands to enhance income from timber production while maintaining the other forest functions. The analysis served as an example for the combined application of simulation tools and a MCA method for the evaluation of management strategies under multi-purpose and multi-user settings with changing climatic conditions. Another focus was set on quantifying the overall effect of forest management on carbon sequestration in the forest sector and the wood industry sector plus substitution effects. To achieve this objective, the carbon emission reduction potential of material and energy substitution (Smat and Sen) was estimated based on a literature review. On average, for each tonne of dry wood used in a wood product substituting a non-wood product, 0.71 fewer tonnes of fossil carbon are emitted into to the atmosphere. Based on Smat and Sen, the calculation of the carbon emission reduction through substitution was implemented in the WPM. Carbon sequestration and substitution effects of management strategies were simulated at three local scales using the WPM and the forest growth models 4C (management unit level) or EFISCEN (federal state of Brandenburg and Germany). An investigation was conducted on the influence of uncertainties in the initialisation of the WPM, Smat, and basic conditions of the wood product sector on carbon sequestration. Results showed that carbon sequestration in the wood industry sector plus substitution effects exceeded sequestration in the forest sector. In contrast to the carbon pools in the forest sector, which acted as sink or source, the substitution effects continually reduced carbon emission as long as forests are managed and timber is harvested. The main climate protection function was investigated for energy substitution which accounted for about half of the total carbon sequestration, followed by carbon storage in landfills. In Germany, the absolute annual carbon sequestration in the forest and wood industry sector plus substitution effects was 19.9 Mt C. Over 50 years the wood industry sector contributed 70% of the total carbon sequestration plus substitution effects.
River reaches protected by dikes exhibit high damage potential due to strong value accumulation in the hinterland areas. While providing an efficient protection against low magnitude flood events, dikes may fail under the load of extreme water levels and long flood durations. Hazard and risk assessments for river reaches protected by dikes have not adequately considered the fluvial inundation processes up to now. Particularly, the processes of dike failures and their influence on the hinterland inundation and flood wave propagation lack comprehensive consideration. This study focuses on the development and application of a new modelling system which allows a comprehensive flood hazard assessment along diked river reaches under consideration of dike failures. The proposed Inundation Hazard Assessment Model (IHAM) represents a hybrid probabilistic-deterministic model. It comprises three models interactively coupled at runtime. These are: (1) 1D unsteady hydrodynamic model of river channel and floodplain flow between dikes, (2) probabilistic dike breach model which determines possible dike breach locations, breach widths and breach outflow discharges, and (3) 2D raster-based diffusion wave storage cell model of the hinterland areas behind the dikes. Due to the unsteady nature of the 1D and 2D coupled models, the dependence between hydraulic load at various locations along the reach is explicitly considered. The probabilistic dike breach model describes dike failures due to three failure mechanisms: overtopping, piping and slope instability caused by the seepage flow through the dike core (micro-instability). The 2D storage cell model driven by the breach outflow boundary conditions computes an extended spectrum of flood intensity indicators such as water depth, flow velocity, impulse, inundation duration and rate of water rise. IHAM is embedded in a Monte Carlo simulation in order to account for the natural variability of the flood generation processes reflected in the form of input hydrographs and for the randomness of dike failures given by breach locations, times and widths. The model was developed and tested on a ca. 91 km heavily diked river reach on the German part of the Elbe River between gauges Torgau and Vockerode. The reach is characterised by low slope and fairly flat extended hinterland areas. The scenario calculations for the developed synthetic input hydrographs for the main river and tributary were carried out for floods with return periods of T = 100, 200, 500, 1000 a. Based on the modelling results, probabilistic dike hazard maps could be generated that indicate the failure probability of each discretised dike section for every scenario magnitude. In the disaggregated display mode, the dike hazard maps indicate the failure probabilities for each considered breach mechanism. Besides the binary inundation patterns that indicate the probability of raster cells being inundated, IHAM generates probabilistic flood hazard maps. These maps display spatial patterns of the considered flood intensity indicators and their associated return periods. Finally, scenarios of polder deployment for the extreme floods with T = 200, 500, 1000 were simulated with IHAM. The developed IHAM simulation system represents a new scientific tool for studying fluvial inundation dynamics under extreme conditions incorporating effects of technical flood protection measures. With its major outputs in form of novel probabilistic inundation and dike hazard maps, the IHAM system has a high practical value for decision support in flood management.
This thesis aims to quantify the human impact on the natural resource water at the landscape scale. The drivers in the federal state of Brandenburg (Germany), the area under investigation, are land-use changes induced by policy decisions at European and federal state level. The water resources of the federal state are particularly sensitive to changes in land-use due to low precipitation rates in the summer combined with sandy soils and high evapotranspiration rates. Key elements in landscape hydrology are forests because of their unique capacity to transport water from the soil to the atmosphere. Given these circumstances, decisions made at any level of administration that may have effects on the forest sector in the state are critical in relation to the water cycle. It is therefore essential to evaluate any decision that may change forest area and structure in such a sensitive region. Thus, as a first step, it was necessary to develop and implement a model able to simulate possible interactions and feedbacks between forested surfaces and the hydrological cycle at the landscape scale. The result is a model for simulating the hydrological properties of forest stands based on a robust computation of the temporal and spatial LAI (leaf area index) dynamics. The approach allows the simulation of all relevant hydrological processes with a low parameter demand. It includes the interception of precipitation and transpiration of forest stands with and without groundwater in the rooting zone. The model also considers phenology, biomass allocation, as well as mortality and simple management practices. It has been implemented as a module in the eco-hydrological model SWIM (Soil and Water Integrated Model). This model has been tested in two pre-studies to verify the applicability of its hydrological process description for the hydrological conditions typical for the state. The newly implemented forest module has been tested for Scots Pine (Pinus sylvestris) and in parts for Common Oak (Quercus robur and Q. petraea) in Brandenburg. For Scots Pine the results demonstrate a good simulation of annual biomass increase and LAI in addition to the satisfactory simulation of litter production. A comparison of the simulated and measured data of the May sprout for Scots pine and leaf unfolding for Oak, as well as the evaluation against daily transpiration measurements for Scots Pine, does support the applicability of the approach. The interception of precipitation has also been simulated and compared with weekly observed data for a Scots Pine stand which displays satisfactory results in both the vegetation periods and annual sums. After the development and testing phase, the model is used to analyse the effects of two scenarios. The first scenario is an increase in forest area on abandoned agricultural land that is triggered by a decrease in European agricultural production support. The second one is a shift in species composition from predominant Scots Pine to Common Oak that is based on decisions of the regional forestry authority to support a more natural species composition. The scenario effects are modelled for the federal state of Brandenburg on a 50m grid utilising spatially explicit land-use patterns. The results, for the first scenario, suggest a negative impact of an increase in forest area (9.4% total state area) on the regional water balance, causing an increase in mean long-term annual evapotranspiration of 3.7% at 100% afforestation when compared to no afforestation. The relatively small annual change conceals a much more pronounced seasonal effect of a mean long-term evapotranspiration increase by 25.1% in the spring causing a pronounced reduction in groundwater recharge and runoff. The reduction causes a lag effect that aggravates the scarcity of water resources in the summer. In contrast, in the second scenario, a change in species composition in existing forests (29.2% total state area) from predominantly Scots Pine to Common Oak decreases the long-term annual mean evapotranspiration by 3.4%, accompanied by a much weaker, but apparent, seasonal pattern. Both scenarios exhibit a high spatial heterogeneity because of the distinct natural conditions in the different regions of the state. Areas with groundwater levels near the surface are particularly sensitive to changes in forest area and regions with relatively high proportion of forest respond strongly to the change in species composition. In both cases this regional response is masked by a smaller linear mean effect for the total state area. Two critical sources of uncertainty in the model results have been investigated. The first one originates from the model calibration parameters estimated in the pre-study for lowland regions, such as the federal state. The combined effect of the parameters, when changed within their physical meaningful limits, unveils an overestimation of the mean water balance by 1.6%. However, the distribution has a wide spread with 14.7% for the 90th percentile and -9.9% for the 10th percentile. The second source of uncertainty emerges from the parameterisation of the forest module. The analysis exhibits a standard deviation of 0.6 % over a ten year period in the mean of the simulated evapotranspiration as a result of variance in the key forest parameters. The analysis suggests that the combined uncertainty in the model results is dominated by the uncertainties of calibration parameters. Therefore, the effect of the first scenario might be underestimated because the calculated increase in evapotranspiration is too small. This may lead to an overestimation of the water balance towards runoff and groundwater recharge. The opposite can be assumed for the second scenario in which the decrease in evapotranspiration might be overestimated.
Adenylates are metabolites with essential function in metabolism and signaling in all living organisms. As Cofactors, they enable thermodynamically unfavorable reactions to be catalyzed enzymatically within cells. Outside the cell, adenylates are involved in signalling processes in animals and emerging evidence suggests similar signaling mechanisms in the plants’ apoplast. Presumably, apoplastic apyrases are involved in this signaling by hydrolyzing the signal mediating molecules ATP and ADP to AMP. This PhD thesis focused on the role of adenylates on metabolism and development of potato (Solanum tuberosum) by using reverse genetics and biochemical approaches. To study the short and long term effect of cellular ATP and the adenylate energy charge on potato tuber metabolism, an apyrase from Escherichia coli targeted into the amyloplast was expressed inducibly and constitutively. Both approaches led to the identification of adaptations to reduced ATP/energy charge levels on the molecular and developmental level. These comprised a reduction of metabolites and pathway fluxes that require significant amounts of ATP, like amino acid or starch synthesis, and an activation of processes that produce ATP, like respiration and an immense increase in the surface-to-volume ratio. To identify extracellular enzymes involved in adenylate conversion, green fluorescent protein and activity localization studies in potato tissue were carried out. It was found that extracellular ATP is imported into the cell by an apoplastic enzyme complement consisting of apyrase, unspecific phosphatase, adenosine nucleosidase and an adenine transport system. By changing the expression of a potato specific apyrase via transgenic approaches, it was found that this enzyme has strong impact on plant and particular tuber development in potato. Whereas metabolite levels were hardly altered, transcript profiling of tubers with reduced apyrase activity revealed a significant upregulation of genes coding for extensins, which are associated with polar growth. The results are discussed in context of adaptive responses of plants to changes in the adenylate levels and the proposed role of apyrase in apoplastic purinergic signaling and ATP salvaging. In summary, this thesis provides insight into adenylate regulated processes within and outside non-photosynthetic plant cells.