Refine
Has Fulltext
- no (140)
Year of publication
- 2013 (140) (remove)
Document Type
- Article (140) (remove)
Language
- English (140)
Is part of the Bibliography
- yes (140)
Keywords
- Climate change (4)
- Land use change (4)
- Iran (3)
- exhumation (3)
- Alborz Mountains (2)
- Asian monsoon (2)
- Earthquake source observations (2)
- Geostatistics (2)
- Holocene (2)
- Mountain basins (2)
Institute
- Institut für Geowissenschaften (140) (remove)
Based on a numerical model of the Northeast German Basin (NEGB), we investigate the sensitivity of the calculated thermal field as resulting from heat conduction, forced and free convection in response to consecutive horizontal and vertical mesh refinements. Our results suggest that computational findings are more sensitive to consecutive horizontal mesh refinements than to changes in the vertical resolution. In addition, the degree of mesh sensitivity depends strongly on the type of the process being investigated, whether heat conduction, forced convection or free thermal convection represents the active heat driver. In this regard, heat conduction exhibits to be relative robust to imposed changes in the spatial discretization. A systematic mesh sensitivity is observed in areas where forced convection promotes an effective role in shorten the background conductive thermal field. In contrast, free thermal convection is to be regarded as the most sensitive heat transport process as demonstrated by non-systematic changes in the temperature field with respect to imposed changes in the model resolution.
The deep thermal field in sedimentary basins can be affected by convection, conduction or both resulting from the structural inventory, physical properties of geological layers and physical processes taking place therein. For geothermal energy extraction, the controlling factors of the deep thermal field need to be understood to delineate favorable drill sites and exploitation compartments. We use geologically based 3-D finite element simulations to figure out the geologic controls on the thermal field of the geothermal research site Gro Schonebeck located in the E part of the North German Basin. Its target reservoir consists of Permian Rotliegend clastics that compose the lower part of a succession of Late Carboniferous to Cenozoic sediments, subdivided into several aquifers and aquicludes. The sedimentary succession includes a layer of mobilized Upper Permian Zechstein salt which plays a special role for the thermal field due to its high thermal conductivity. Furthermore, the salt is impermeable and due to its rheology decouples the fault systems in the suprasalt units from subsalt layers. Conductive and coupled fluid and heat transport simulations are carried out to assess the relative impact of different heat transfer mechanisms on the temperature distribution. The measured temperatures in 7 wells are used for model validation and show a better fit with models considering fluid and heat transport than with a purely conductive model. Our results suggest that advective and convective heat transport are important heat transfer processes in the suprasalt sediments. In contrast, thermal conduction mainly controls the subsalt layers. With a third simulation, we investigate the influence of a major permeable and of three impermeable faults dissecting the subsalt target reservoir and compare the results to the coupled model where no faults are integrated. The permeable fault may have a local, strong impact on the thermal, pressure and velocity fields whereas the impermeable faults only cause deviations of the pressure field.
Fluid flow in low-permeable carbonate rocks depends on the density of fractures, their interconnectivity and on the formation of fault damage zones. The present-day stress field influences the aperture hence the transmissivity of fractures whereas paleostress fields are responsible for the formation of faults and fractures. In low-permeable reservoir rocks, fault zones belong to the major targets. Before drilling, an estimate for reservoir productivity of wells drilled into the damage zone of faults is therefore required. Due to limitations in available data, a characterization of such reservoirs usually relies on the use of numerical techniques. The requirements of these mathematical models encompass a full integration of the actual fault geometry, comprising the dimension of the fault damage zone and of the fault core, and the individual population with properties of fault zones in the hanging and foot wall and the host rock. The paper presents both the technical approach to develop such a model and the property definition of heterogeneous fault zones and host rock with respect to the current stress field. The case study describes a deep geothermal reservoir in the western central Molasse Basin in southern Bavaria, Germany. Results from numerical simulations indicate that the well productivity can be enhanced along compressional fault zones if the interconnectivity of fractures is lateral caused by crossing synthetic and antithetic fractures. The model allows a deeper understanding of production tests and reservoir properties of faulted rocks.
With this paper, we assess the present-day conductive thermal field of the Glueckstadt Graben in NW Germany that is characterized by large salt walls and diapirs structuring the graben fill. We use a finite element method to calculate the 3D steady-state conductive thermal field based on a lithosphere-scale 3D structural model that resolves the first-order structural characteristics of the graben and its underlying lithosphere. Model predictions are validated against measured temperatures in six deep wells. Our investigations show that the interaction of thickness distributions and thermal rock properties of the different geological layers is of major importance for the distribution of temperatures in the deep subsurface of the Glueckstadt Graben. However, the local temperatures may result from the superposed effects of different controlling factors. Especially, the upper sedimentary part of the model exhibits huge lateral temperature variations, which correlate spatially with the shape of the thermally highly conductive Permian salt layer. Variations in thickness and geometry of the salt cause two major effects, which provoke considerable lateral temperature variations for a given depth. (1) The "chimney effect" causes more efficient heat transport within salt diapirs. As a consequence positive thermal anomalies develop in the upper part and above salt structures, where the latter are covered by much less conductive sediments. In contrast, negative thermal anomalies are noticeable underneath salt structures. (2) The "thermal blanketing effect" is caused by thermally low conductive sediments that provoke the local storage of heat where these insulating sediments are present. The latter effect leads to both local and regional thermal anomalies. Locally, this translates to higher temperatures where salt margin synclines are filled with thick insulating clastic sediments. For the regional anomalies the cumulative insulating effects of the entire sediment fill results in a long-wavelength variation of temperatures in response to heat refraction effects caused by the contrast between insulating sediments and highly conductive crystalline crust. Finally, the longest wavelength of temperature variations is caused by the depth position of the isothermal lithosphere-asthenosphere boundary defining the regional variations of the overall geothermal gradient. We find that a conductive thermal model predicts observed temperatures reasonably well for five of the six available wells, whereas the steady-state conductive approach appears not to be valid for the sixth well.
The last known eruption at Cerro Machin Volcano (CMV) in the Central Cordillera of Colombia occurred 900 years BP and ended with the formation of a dacitic lava dome. The dome rocks contain both normally and reversely zoned plagioclase (An(24-54)), unzoned and reversely zoned amphiboles of dominantly tschermakite and pargasite/magnesio-hastingsite composition and olivine xenocrysts (Fo = 85-88) with amphibole/clinopyroxene overgrowth, all suggesting interaction with mafic magma at depth. Plagioclase additionally exhibits complex oscillatory zoning patterns reflecting repeated replenishment, fractionation and changes in intrinsic conditions in the magma reservoir. Unzoned amphiboles and cores of the reversely zoned amphiboles give identical crystallization conditions of 910 +/- 30 degrees C and 360 +/- 70 MPa, corresponding to a depth of about 13 +/- 2 km, at moderately oxidized conditions (f(O2) = +0.5 +/- 0.2 Delta NNO). The water content in the melt, calculated based on amphibole chemistry, is 7.1 +/- 0.4 wt.%. Rims of the reversely zoned amphiboles are relatively enriched in MgO and yield higher crystallization temperatures (T = 970 +/- 25 degrees C), slightly lower melt H2O contents (6.1 +/- 0.7 wt.%) and overlapping pressures (410 +/- 100 MPa). We suggest that these rims crystallized following an influx of mafic melt into a resident magma reservoir at mid-crustal depths, further supported by the occurrence of xenocrystic olivine. Crystallization of biotite, albite-rich plagioclase and quartz occurred at comparatively low temperatures (probably <800 degrees C) during early stages of ascent or storage at shallower levels. Based on amphibole mineral chemistry, the felsic resident melt had a rhyolitic composition (71 +/- 2 wt.% SiO2), whereas the hybrid magma, from which the amphibole rims crystallized, was dacitic (64 +/- 3 wt.% SiO2). The bulk rock chemistry of the CMV lava dome dacites is homogenous. They have elevated (La/Nb)(N) ratios of 3.8-4.5, typical for convergent margin magmas, and display several geochemical characteristics, of adakites. Both Sr and Nd isotope compositions (Sr-87/Sr-86 similar to 0.70497, Nd-143/Nd-144 similar to 0.51267) are among the most radiogenic observed for the Northern Volcanic Zone of the Andes. They are distinct from oceanic crust that has been subducted in the region, pointing to a continental crustal control on the isotope composition and hence the adakitic signature, possibly in a crustal "hot zone".
Emerged marine terraces and paleoshorelines along plate margins are prominent geomorphic markers that can be used to quantify the rates and patterns of crustal deformation. The northern margin of the Central Anatolian Plateau has been interpreted as an actively deforming orogenic wedge between the North Anatolian Fault and the Black Sea. Here we use uplifted marine terraces across principal faults on the Sinop Peninsula at the central northern side of the Pontide orogenic wedge to unravel patterns of Quaternary faulting and orogenic wedge behavior. We leveled the present-day elevations of paleoshorelines and dated marine terrace deposits using optically stimulated luminescence (OSL) to determine coastal uplift. The elevations of the paleoshorelines vary between 4 +/- 0.2 and 67 +/- 1.4 m above sea level and OSL ages suggest terrace formation episodes during interglacial periods at ca 125, 190, 400 and 570 ka, corresponding to marine isotopic stages (MIS) 5e, 7a, 11 and 15. Mean apparent vertical displacement rates (without eustatic correction) deduced from these terraces range between 0.02 and 0.18 mm/a, with intermittent faster rates of up to 0.26 mm/a. We obtained higher rates at the eastern and southern parts of the peninsula, toward the hinterland, indicating non-uniform uplift across the different morphotectonic segments of the peninsula. Our data are consistent with active on- and offshore faulting across the Sinop Peninsula. When integrated with regional tectonic observations, the faulting pattern reflects shortening distributed over a broad region of the northern margin of the Central Anatolian Plateau during the Quaternary.
The sidi Mohamed peridotites (Edough Massif, NE Algeria) - evidence for an upper mantle origin
(2013)
The Hercynian Edough massif is the easternmost crystalline massif of the Algerian coast. It consists of two tectonically superposed units composed of micaschists, gneisses, and peridotite. This study concentrates on the small and isolated Sidi Mohamed peridotite outcrop area (0.03 km(2)). The Sidi Mohamed peridotite is composed mainly of harzburgites (Mg-rich olivine and orthopyroxene as major minerals). The Ni (2051-2920 ppm), Cr (2368-5514 ppm) and MgO (similar to 28-35 wt.%) whole-rock composition and the relative depletion in Nb make these harzburgites comparable to depleted peridotites related to a subduction zone. We suggest that the Sidi Mohamed ultramafic body was derived directly from the upper mantle and tectonically incorporated into the gneiss units of the Edough metamorphic core complex in a subduction environment.
Quantifying lithogenic inputs to the North Pacific Ocean using the long-lived thorium isotopes
(2013)
Dissolved Th-232 is added to the ocean though the partial dissolution of lithogenic materials such as aerosol dust in the same way as other lithogenically sourced and more biologically important trace metals such as Fe. Oceanic Th-230, on the other hand, is sourced primarily from the highly predictable decay of dissolved U-234. The rate at which dissolved Th-232 is released by mineral dissolution can be constrained by a Th removal rate derived from Th-230:U-234 disequilibria, assuming steady-state. Calculated fluxes of dissolved Th-232 can in turn be used to estimate fluxes of other lithogenically sourced dissolved metals as well as the original lithogenic supplies, such as aerosol dust deposition, given the concentration and fractional solubility of Th (or other metals) in the lithogenic material. This method is applied to 7 water column profiles from the Innovative North Pacific Experiment (INOPEX) cruise of 2009 and 2 sites from the subtropical North Pacific. The structure of shallow depth profiles suggests rapid scavenging at the surface and at least partial regeneration of dissolved Th-232 at 100-200 m depth. This rapid cycling could involve colloidal Th generated during mineral dissolution, which may not be subject to the same removal rates as the more truly dissolved Th-230. An additional deep source of Th-232 was revealed in deep waters, most likely dissolution of seafloor sediments, and offers a constraint on dissolved trace element supply due to boundary exchange. (C) 2013 Elsevier B.V. All rights reserved.
During the African Humid Period (AHP, 15-5 ka BP) an almost 300 m deep paleo-lake covering 2200 km(2) developed in the Suguta Valley, in the Northern Kenya Rift Data from lacustrine sediments and paleo-shorelines indicate that a large paleo-lake already existed by 13.9 ka BP, and record rapid water level fluctuations of up to 100 m within periods of 100 years or less, and a final lowstand at the end of the AHP (5 ka BP). We used a hydro-balance model to assess the abruptness of these water level fluctuations and identify their causes. We observed that fluctuations within the AHP were caused by abrupt changes in precipitation of 26-40%. Despite the absence of continuous lacustrine data documenting the onset of the AHP in the Suguta Valley, we conclude from the hydro-balance model that only an abrupt onset to the AHP, prior to 14.8 ka BP, could have led to high water levels recorded. The modeling results suggest that the sudden increase in rainfall was the direct consequence of an eastward migration of the Congo Air Boundary (CAB), caused by an enhanced atmospheric pressure gradient between East Africa and southern Asia during a northern hemisphere (NH) summer insolation maximum. In contrast the end of the AHP must have been gradual despite an abrupt change in the source of precipitation when a decreasing pressure gradient between Asia and Africa prevented the CAB from reaching the study area. This abruptness was probably buffered by a contemporaneous change in precession producing an insolation maximum at the equator during September-October. This change would have meant that the only rain source was the Intertropical Convergence Zone (IT CZ), which would have carried a greater amount of moisture during the short rainy season thus slowing the fall in water level over a period of about 1000 years in association with the reduction in insolation. The results of this study provide an indication of the amount of time available for humans in north-eastern Africa to adapt in response to a changing climate, from hunting and gathering to farming and herding.
The geomorphic evolution of the Makran Range of SE-Iran and SW-Pakistan has been controlled by the prevailing SW-Asian monsoon and Mediterranean winter rainfall climate and the surface uplift processes resulting from the Arabia-Eurasia collision. The impact of climate on Quaternary fluvial and alluvial sequence formation and their regional correlation has been little investigated due to limited age control of these sequences. Using Be-10 cosmogenic nuclide exposure ages we established a Middle to Late Pleistocene terrace chronology. Our record tentatively indicates that terrace levels were abandoned towards the transition to or during warmer/pluvial periods (interglacials and/or interstadials) back to Marine Isotope Stage (MIS) 7, but abandoned ages show a large spread. It is hypothesized that pluvial phases correspond with times of enhanced SW-monsoons and a northward shift of the Intertropical Convergence Zone (ITCZ). Furthermore, orbital periodidties can be deduced on frequencies related to obliquity and precession cycles. Overall, caution has to be placed in sampling and interpreting alluvial deposits, which may have complex inheritance patterns and spatially and temporarily variable catchment erosion histories and terrace-channel dynamics.
Beside the dominant climate control on terrace formation, elevated channel steepness indices around major thrusts and numerous knickpoints indicate an additionally tectonic influence on terrace formation. Local incision rates (mean similar to 0.6-0.8 min.a(-1)) are variable in space and time but are similar to uplift rates obtained from coastal terraces and thus suggest a regional surface uplift. (C) 2013 Elsevier B.V. All rights reserved.