Refine
Year of publication
Document Type
- Article (2817) (remove)
Keywords
- Holocene (35)
- climate change (30)
- Earthquake source observations (21)
- Climate change (18)
- Pollen (18)
- erosion (18)
- permafrost (18)
- Himalaya (17)
- Tibetan Plateau (17)
- Seismicity and tectonics (15)
Institute
- Institut für Geowissenschaften (2817) (remove)
In this study, 3-D models of P-wave velocity (Vp) and P-wave and S-wave ratio (Vp/Vs) of the crust and upper mantle in the Eastern and eastern Southern Alps (northern Italy and southern Austria) were calculated using local earthquake tomography (LET). The data set includes high-quality arrival times from well-constrained hypocenters observed by the dense, temporary seismic networks of the AlpArray AASN and SWATH-D. The resolution of the LET was checked by synthetic tests and analysis of the model resolution matrix. The small inter-station spacing (average of similar to 15 km within the SWATH-D network) allowed us to image crustal structure at unprecedented resolution across a key part of the Alps. The derived P velocity model revealed a highly heterogeneous crustal structure in the target area. One of the main findings is that the lower crust is thickened, forming a bulge at 30-50 km depth just south of and beneath the Periadriatic Fault and the Tauern Window. This indicates that the lower crust decoupled both from its mantle substratum as well as from its upper crust. The Moho, taken to be the iso-velocity contour of Vp = 7.25 km/s, agrees with the Moho depth from previous studies in the European and Adriatic forelands. It is shallower on the Adriatic side than on the European side. This is interpreted to indicate that the European Plate is subducted beneath the Adriatic Plate in the Eastern and eastern Southern Alps.
Phase transitions in molecular crystals are often determined by intermolecular interactions. The cage complex of [Co(C12H30N8)](3+) . 3 NO3- is reported to undergo a disorder-order phase transition at T-c1 approximate to 133 K upon cooling. Temperature-dependent neutron and synchrotron diffraction experiments revealed satellite reflections in addition to main reflections in the diffraction patterns below T-c1. The modulation wave vector varies as function of temperature and locks in at T-c3 approximate to 98 K. Here, we demonstrate that the crystal symmetry lowers from hexagonal to monoclinic in the incommensurately modulated phases in T-c1<T<T-c3. Distinctive levels of competitions: trade-off between longer N-H...O and shorter C-H...O hydrogen bonds; steric constraints to dense C-H...O bonds give rise to pronounced modulation of the basic structure. Severely frustrated crystal packing in the incommensurate phase is precursor to optimal balance of intermolecular interactions in the lock-in phase.
Volcano-seismic signals such as long-period events and tremor are important indicators for volcanic activity and unrest. However, their wavefield is complex and characterization and location using traditional seismological instrumentation is often difficult.
In 2019 we recorded the full seismic wavefield using a newly developed 3C rotational sensor co-located with a 3C traditional seismometer on Etna, Italy. We compare the performance of the rotational sensor, the seismometer and the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) seismic network with respect to the analysis of complex volcano-seismic signals. We create event catalogs for volcano-tectonic (VT) and long-period (LP) events combining a STA/LTA algorithm and cross-correlations.
The event detection based on the rotational sensor is as reliable as the seismometer-based detection. The LP events are dominated by SH-type waves. Derived SH phase velocities range from 500 to 1,000 m/s for LP events and 300-400 m/s for volcanic tremor. SH-waves compose the tremor during weak volcanic activity and SH- and SV-waves during sustained strombolian activity.
We derive back azimuths using (a) horizontal rotational components and (b) vertical rotation rate and transverse acceleration. The estimated back azimuths are consistent with the INGV-OE event location for (a) VT events with an epicentral distance larger than 3 km and some closer events, (b) LP events and tremor in the main crater area. Measuring the full wavefield we can reliably analyze the back azimuths, phase velocities and wavefield composition for VT, LP events and tremor in regions that are difficult to access such as volcanoes.
Extracting information about past tectonic or climatic environmental changes from sedimentary records is a key objective of provenance research. Interpreting the imprint of such changes remains challenging as signals might be altered in the sediment-routing system.
We investigate the sedimentary provenance of the Oligocene/Miocene Upper Austrian Northern Alpine Foreland Basin and its response to the tectonically driven exhumation of the Tauern Window metamorphic dome (28 +/- 1 Ma) in the Eastern European Alps by using the unprecedented combination of Nd isotopic composition of bulk-rock clay-sized samples and partly previously published multi-proxy (Nd isotopic composition, trace-element geochemistry, U-Pb dating) sand-sized apatite single-grain analysis.
The basin offers an excellent opportunity to investigate environmental signal propagation into the sedimentary record because comprehensive stratigraphic and seismic datasets can be combined with present research results. The bulk-rock clay-sized fraction epsilon Nd values of well-cutting samples from one well on the northern basin slope remained stable at similar to-9.7 from 27 to 19 Ma but increased after 19 Ma to similar to-9.1. In contrast, apatite single-grain distributions, which were extracted from 22 drill-core samples, changed significantly around 23.3 Ma from apatites dominantly from low-grade (<upper amphibolite-facies) metamorphic sources with Permo-Mesozoic and late Variscan U-Pb ages and epsilon Nd values of -4.4 to dominantly high-grade metamorphic apatites with late Variscan U-Pb ages and epsilon Nd values of -2.2.
The change in apatite single-grain distributions at 23.3 Ma is interpreted to result from the exposure of a new Upper Austroalpine source nappe with less negative epsilon Nd values triggered by the ongoing Tauern Window exhumation. Combining these data with the clay-sized bulk-rock epsilon Nd values reveals that the provenance changed 4-5 Myrs later at 19 Ma in the clay-sized fraction.
Reasons for the delayed provenance-change recording are rooted in the characteristics of the applied methods.
Whereas single-grain distributions of orogen-wide sediment-routing systems can be dominated by geographically small areas with high erosion and mineral fertility rates, bulk-rock methods integrate over the entire drainage basin, thus diminishing extreme values. Hence, by combining these two methods, spatial information are uncovered, enabling a previously unattained understanding of the underlying environmental change.
White mica and tourmaline are the dominant hydrothermal alteration minerals at the world-class Panasqueira W-Sn-Cu deposit in Portugal. Thus, understanding the controls on their chemical composition helps to constrain ore formation processes at this deposit and determine their usefulness as pathfinder minerals for mineralization in general. We combine whole-rock geochemistry of altered and unaltered metasedimentary host rocks with in situ LA-ICP-MS measurements of tourmaline and white mica from the alteration halo. Principal component analysis (PCA) is used to better identify geochemical patterns and trends of hydrothermal alteration in the datasets. The hydrothermally altered metasediments are enriched in As, Sn, Cs, Li, W, F, Cu, Rb, Zn, Tl, and Pb relative to unaltered samples. In situ mineral analyses show that most of these elements preferentially partition into white mica over tourmaline (Li, Rb, Cs, Tl, W, and Sn), whereas Zn is enriched in tourmaline. White mica has distinct compositions in different settings within the deposit (greisen, vein selvages, wall rock alteration zone, late fault zone), indicating a compositional evolution with time. In contrast, tourmaline from different settings overlaps in composition, which is ascribed to a stronger dependence on host rock composition and also to the effects of chemical zoning and microinclusions affecting the LA-ICP-MS analyses. Hence, in this deposit, white mica is the better recorder of the fluid composition. The calculated trace-element contents of the Panasqueira mineralizing fluid based on the mica data and estimates of mica-fluid partition coefficients are in good agreement with previous fluid-inclusion analyses. A compilation of mica and tourmaline trace-element compositions from Panasqueira and other W-Sn deposits shows that white mica has good potential as a pathfinder mineral, with characteristically high Li, Cs, Rb, Sn, and W contents. The trace-element contents of hydrothermal tourmaline are more variable. Nevertheless, the compiled data suggest that high Sn and Li contents are distinctive for tourmaline from W-Sn deposits.
The Devonian Las Chacras-Potrerillos batholith comprises six nested monzonitic to granitic intrusions with metaluminous to weakly peraluminous composition and a Sr-Nd isotopic signature indicating a dominantly juvenile mantle-derived source. The chemically most evolved units in the southern batholith contain a large number of intra-granitic, pod-shaped tourmaline-bearing pegmatites. This study uses in situ chemical and boron isotopic analyses of tourmaline from nine of these pegmatites to discuss their relationship to the respective host intrusions and the implications of their B-isotope composition for the source and evolution of the magmas. The tourmalines reveal a diversity in element composition (e.g., FeO, MgO, TiO2, CaO, MnO, F) which distinguishes individual pegmatites from one another. However, all have a narrow 5 11 B range of -13.7 to -10.5%0 (n = 100) which indicates a relatively uniform magmatic system and similar temperature conditions during tourmaline crystallization. The average delta(11) B value of -11.7%0 is typical for S-type granites and is within the range reported for peraluminous granites. pegmatites, and metamorphic units of the Ordovician basement into which the Las Chacras-Potrerillos batholith intruded. The B-isotope evidence argues for a crustal boron source like that of the Ordovician basement, in contrast to the metaluminous to weakly peraluminous composition and juvenile initial Sr and Nd isotope ratios of the Las Chacras-Potrerillos batholith magmas. We propose that the boron was not derived from the magma source region but was incorporated from dehydration melting of elastic metasedimentary rocks higher up in the crustal column.
The Altiplano-Puna Plateau holds several shallow lakes, which are very sensitive to climate changes. This work is focused on a high-altitude lake system called Lagunas de Vilama (LVS), located in a complex climatic transition area with scarcity of continuous and homogeneous instrumental records. The objective of this study is to determine the regional spatial-temporal variability of precipitation and evaluate the seasonal and interannual lake responses. We use a lake-surfaces record derived from Landsat images to investigate links with regional precipitations and different climatic forcings. The results reveal that austral summer and autumn precipitations control the variability of the annual lake-surfaces. Also, we found intra-annual and interannual lags in the lake responses to precipitations, and identified several wet and dry stages. Our results show negative trends in precipitations and lake-surfaces, whose were strengthened by a shift to a warm phase of the Atlantic Multidecadal Oscillation in the 1990s. The El Nino Southern Oscillation, Pacific Decadal Oscillation, and Southern Annular Mode also exert a strong influence in the region. This study demonstrates that the variability of LVS lakes is strongly related to the South American Monsoon System dynamics and large-scale climate fordngs from the Pacific and Atlantic Oceans. This work provides novel indices which demonstrated to be good indicators of regional hydroclimatological variability for this region of South America.
Long- and short-term monitoring of a dam in response to seasonal changes and ground motion loading
(2021)
An experimental multi-parameter structural monitoring system has been installed on the Kurpsai dam, western Kyrgyz Republic. This system consists of equipment for seismic and strain measurements for making longer- (days, weeks, months) and shorter- (minutes, hours) term observations, dealing with, for example seasonal (longer) effects or the response of the dam to ground motion from noise or seismic events. Fibre-optic strain sensors allow the seasonal and daily opening and closing of the spaces between the dam's segments to be tracked. For the seismic data, both amplitude (in terms of using differences in amplitudes in the Fourier spectra for mapping the modes of vibration of the dam) and their time-frequency distribution for a set of small to moderate seismic events are investigated and the corresponding phase variabilities (in terms of lagged coherency) are evaluated. Even for moderate levels of seismic-induced ground motion, some influence on the structural response can be detected, which then sees the dam quickly return to its original state. A seasonal component was identified in the strain measurements, while levels of noise arising from the operation of the dam's generators and associated water flow have been provisionally identified.
Centroid moment tensor (CMT) parameters can be estimated from seismic waveforms. Since these data indirectly observe the deformation process, CMTs are inferred as solutions to inverse problems which are generally underdetermined and require significant assumptions, including assumptions about data noise. Broadly speaking, we consider noise to include both theory and measurement errors, where theory errors are due to assumptions in the inverse problem and measurement errors are caused by the measurement process. While data errors are routinely included in parameter estimation for full CMTs, less attention has been paid to theory errors related to velocity-model uncertainties and how these affect the resulting moment-tensor (MT) uncertainties. Therefore, rigorous uncertainty quantification for CMTs may require theory-error estimation which becomes a problem of specifying noise models. Various noise models have been proposed, and these rely on several assumptions. All approaches quantify theory errors by estimating the covariance matrix of data residuals. However, this estimation can be based on explicit modelling, empirical estimation and/or ignore or include covariances. We quantitatively compare several approaches by presenting parameter and uncertainty estimates in nonlinear full CMT estimation for several simulated data sets and regional field data of the M-1 4.4, 2015 June 13 Fox Creek, Canada, event. While our main focus is at regional distances, the tested approaches are general and implemented for arbitrary source model choice. These include known or unknown centroid locations, full MTs, deviatoric MTs and double-couple MTs. We demonstrate that velocity-model uncertainties can profoundly affect parameter estimation and that their inclusion leads to more realistic parameter uncertainty quantification. However, not all approaches perform equally well. Including theory errors by estimating non-stationary (non-Toeplitz) error covariance matrices via iterative schemes during Monte Carlo sampling performs best and is computationally most efficient. In general, including velocity-model uncertainties is most important in cases where velocity structure is poorly known.
Ice-rich permafrost has been subject to abrupt thaw and thermokarst formation in the past and is vulnerable to current global warming. The ice-rich permafrost domain includes Yedoma sediments that have never thawed since deposition during the late Pleistocene and Alas sediments that were formed by previous thermokarst processes during the Lateglacial and Holocene warming. Permafrost thaw unlocks organic carbon (OC) and minerals from these deposits and exposes OC to mineralization. A portion of the OC can be associated with iron (Fe), a redox-sensitive element acting as a trap for OC. Post-depositional thaw processes may have induced changes in redox conditions in these deposits and thereby affected Fe distribution and interactions between OC and Fe, with knock-on effects on the role that Fe plays in mediating present day OC mineralization. To test this hypothesis, we measured Fe concentrations and proportion of Fe oxides and Fe complexed with OC in unthawed Yedoma and previously thawed Alas deposits. Total Fe concentrations were determined on 1,292 sediment samples from the Yedoma domain using portable X-ray fluorescence; these concentrations were corrected for trueness using a calibration based on a subset of 144 samples measured by inductively coupled plasma optical emission spectrometry after alkaline fusion (R (2) = 0.95). The total Fe concentration is stable with depth in Yedoma deposits, but we observe a depletion or accumulation of total Fe in Alas deposits, which experienced previous thaw and/or flooding events. Selective Fe extractions targeting reactive forms of Fe on unthawed and previously thawed deposits highlight that about 25% of the total Fe is present as reactive species, either as crystalline or amorphous oxides, or complexed with OC, with no significant difference in proportions of reactive Fe between Yedoma and Alas deposits. These results suggest that redox driven processes during past thermokarst formation impact the present-day distribution of total Fe, and thereby the total amount of reactive Fe in Alas versus Yedoma deposits. This study highlights that ongoing thermokarst lake formation and drainage dynamics in the Arctic influences reactive Fe distribution and thereby interactions between Fe and OC, OC mineralization rates, and greenhouse gas emissions.