004 Datenverarbeitung; Informatik
Refine
Year of publication
Document Type
- Doctoral Thesis (80)
- Article (47)
- Conference Proceeding (11)
- Master's Thesis (6)
- Postprint (6)
- Monograph/Edited Volume (3)
- Other (3)
- Bachelor Thesis (1)
- Habilitation Thesis (1)
- Moving Images (1)
Is part of the Bibliography
- yes (159) (remove)
Keywords
- Machine Learning (7)
- Maschinelles Lernen (7)
- answer set programming (6)
- Antwortmengenprogrammierung (5)
- Informatik (5)
- Answer Set Programming (3)
- Informatikdidaktik (3)
- higher education (3)
- image processing (3)
- machine learning (3)
Institute
- Institut für Informatik und Computational Science (159) (remove)
This thesis is concerned with the solution of the blind source separation problem (BSS). The BSS problem occurs frequently in various scientific and technical applications. In essence, it consists in separating meaningful underlying components out of a mixture of a multitude of superimposed signals. In the recent research literature there are two related approaches to the BSS problem: The first is known as Independent Component Analysis (ICA), where the goal is to transform the data such that the components become as independent as possible. The second is based on the notion of diagonality of certain characteristic matrices derived from the data. Here the goal is to transform the matrices such that they become as diagonal as possible. In this thesis we study the latter method of approximate joint diagonalization (AJD) to achieve a solution of the BSS problem. After an introduction to the general setting, the thesis provides an overview on particular choices for the set of target matrices that can be used for BSS by joint diagonalization. As the main contribution of the thesis, new algorithms for approximate joint diagonalization of several matrices with non-orthogonal transformations are developed. These newly developed algorithms will be tested on synthetic benchmark datasets and compared to other previous diagonalization algorithms. Applications of the BSS methods to biomedical signal processing are discussed and exemplified with real-life data sets of multi-channel biomagnetic recordings.
Most of the microelectronic circuits fabricated today are synchronous, i.e. they are driven by one or several clock signals. Synchronous circuit design faces several fundamental challenges such as high-speed clock distribution, integration of multiple cores operating at different clock rates, reduction of power consumption and dealing with voltage, temperature, manufacturing and runtime variations. Asynchronous or clockless design plays a key role in alleviating these challenges, however the design and test of asynchronous circuits is much more difficult in comparison to their synchronous counterparts. A driving force for a widespread use of asynchronous technology is the availability of mature EDA (Electronic Design Automation) tools which provide an entire automated design flow starting from an HDL (Hardware Description Language) specification yielding the final circuit layout. Even though there was much progress in developing such EDA tools for asynchronous circuit design during the last two decades, the maturity level as well as the acceptance of them is still not comparable with tools for synchronous circuit design. In particular, logic synthesis (which implies the application of Boolean minimisation techniques) for the entire system's control path can significantly improve the efficiency of the resulting asynchronous implementation, e.g. in terms of chip area and performance. However, logic synthesis, in particular for asynchronous circuits, suffers from complexity problems. Signal Transitions Graphs (STGs) are labelled Petri nets which are a widely used to specify the interface behaviour of speed independent (SI) circuits - a robust subclass of asynchronous circuits. STG decomposition is a promising approach to tackle complexity problems like state space explosion in logic synthesis of SI circuits. The (structural) decomposition of STGs is guided by a partition of the output signals and generates a usually much smaller component STG for each partition member, i.e. a component STG with a much smaller state space than the initial specification. However, decomposition can result in component STGs that in isolation have so-called irreducible CSC conflicts (i.e. these components are not SI synthesisable anymore) even if the specification has none of them. A new approach is presented to avoid such conflicts by introducing internal communication between the components. So far, STG decompositions are guided by the finest output partitions, i.e. one output per component. However, this might not yield optimal circuit implementations. Efficient heuristics are presented to determine coarser partitions leading to improved circuits in terms of chip area. For the new algorithms correctness proofs are given and their implementations are incorporated into the decomposition tool DESIJ. The presented techniques are successfully applied to some benchmarks - including 'real-life' specifications arising in the context of control resynthesis - which delivered promising results.
Die stetige Weiterentwicklung von VR-Systemen bietet neue Möglichkeiten der Interaktion mit virtuellen Objekten im dreidimensionalen Raum, stellt Entwickelnde von VRAnwendungen aber auch vor neue Herausforderungen. Selektions- und Manipulationstechniken müssen unter Berücksichtigung des Anwendungsszenarios, der Zielgruppe und der zur Verfügung stehenden Ein- und Ausgabegeräte ausgewählt werden. Diese Arbeit leistet einen Beitrag dazu, die Auswahl von passenden Interaktionstechniken zu unterstützen. Hierfür wurde eine repräsentative Menge von Selektions- und Manipulationstechniken untersucht und, unter Berücksichtigung existierender Klassifikationssysteme, eine Taxonomie entwickelt, die die Analyse der Techniken hinsichtlich interaktionsrelevanter Eigenschaften ermöglicht. Auf Basis dieser Taxonomie wurden Techniken ausgewählt, die in einer explorativen Studie verglichen wurden, um Rückschlüsse auf die Dimensionen der Taxonomie zu ziehen und neue Indizien für Vor- und Nachteile der Techniken in spezifischen Anwendungsszenarien zu generieren. Die Ergebnisse der Arbeit münden in eine Webanwendung, die Entwickelnde von VR-Anwendungen gezielt dabei unterstützt, passende Selektions- und Manipulationstechniken für ein Anwendungsszenario auszuwählen, indem Techniken auf Basis der Taxonomie gefiltert und unter Verwendung der Resultate aus der Studie sortiert werden können.
Intuitive Modelle der Informatik sind gedankliche Vorstellungen über informatische Konzepte, die mit subjektiver Gewissheit verbunden sind. Menschen verwenden sie, wenn sie die Arbeitsweise von Computerprogrammen nachvollziehen oder anderen erklären, die logische Korrektheit eines Programms prüfen oder in einem kreativen Prozess selbst Programme entwickeln. Intuitive Modelle können auf verschiedene Weise repräsentiert und kommuniziert werden, etwa verbal-abstrakt, durch ablauf- oder strukturorientierte Abbildungen und Filme oder konkrete Beispiele. Diskutiert werden in dieser Arbeit grundlegende intuitive Modelle für folgende inhaltliche Aspekte einer Programmausführung: Allokation von Aktivität bei einer Programmausführung, Benennung von Entitäten, Daten, Funktionen, Verarbeitung, Kontrollstrukturen zur Steuerung von Programmläufen, Rekursion, Klassen und Objekte. Mit Hilfe eines Systems von Online-Spielen, der Python Visual Sandbox, werden die psychische Realität verschiedener intuitiver Modelle bei Programmieranfängern nachgewiesen und fehlerhafte Anwendungen (Fehlvorstellungen) identifiziert.
ProtoSense
(2015)
The exponential expanding of the numbers of web sites and Internet users makes WWW the most important global information resource. From information publishing and electronic commerce to entertainment and social networking, the Web allows an inexpensive and efficient access to the services provided by individuals and institutions. The basic units for distributing these services are the web sites scattered throughout the world. However, the extreme fragility of web services and content, the high competence between similar services supplied by different sites, and the wide geographic distributions of the web users drive the urgent requirement from the web managers to track and understand the usage interest of their web customers. This thesis, "X-tracking the Usage Interest on Web Sites", aims to fulfill this requirement. "X" stands two meanings: one is that the usage interest differs from various web sites, and the other is that usage interest is depicted from multi aspects: internal and external, structural and conceptual, objective and subjective. "Tracking" shows that our concentration is on locating and measuring the differences and changes among usage patterns. This thesis presents the methodologies on discovering usage interest on three kinds of web sites: the public information portal site, e-learning site that provides kinds of streaming lectures and social site that supplies the public discussions on IT issues. On different sites, we concentrate on different issues related with mining usage interest. The educational information portal sites were the first implementation scenarios on discovering usage patterns and optimizing the organization of web services. In such cases, the usage patterns are modeled as frequent page sets, navigation paths, navigation structures or graphs. However, a necessary requirement is to rebuild the individual behaviors from usage history. We give a systematic study on how to rebuild individual behaviors. Besides, this thesis shows a new strategy on building content clusters based on pair browsing retrieved from usage logs. The difference between such clusters and the original web structure displays the distance between the destinations from usage side and the expectations from design side. Moreover, we study the problem on tracking the changes of usage patterns in their life cycles. The changes are described from internal side integrating conceptual and structure features, and from external side for the physical features; and described from local side measuring the difference between two time spans, and global side showing the change tendency along the life cycle. A platform, Web-Cares, is developed to discover the usage interest, to measure the difference between usage interest and site expectation and to track the changes of usage patterns. E-learning site provides the teaching materials such as slides, recorded lecture videos and exercise sheets. We focus on discovering the learning interest on streaming lectures, such as real medias, mp4 and flash clips. Compared to the information portal site, the usage on streaming lectures encapsulates the variables such as viewing time and actions during learning processes. The learning interest is discovered in the form of answering 6 questions, which covers finding the relations between pieces of lectures and the preference among different forms of lectures. We prefer on detecting the changes of learning interest on the same course from different semesters. The differences on the content and structure between two courses leverage the changes on the learning interest. We give an algorithm on measuring the difference on learning interest integrated with similarity comparison between courses. A search engine, TASK-Moniminer, is created to help the teacher query the learning interest on their streaming lectures on tele-TASK site. Social site acts as an online community attracting web users to discuss the common topics and share their interesting information. Compared to the public information portal site and e-learning web site, the rich interactions among users and web content bring the wider range of content quality, on the other hand, provide more possibilities to express and model usage interest. We propose a framework on finding and recommending high reputation articles in a social site. We observed that the reputation is classified into global and local categories; the quality of the articles having high reputation is related with the content features. Based on these observations, our framework is implemented firstly by finding the articles having global or local reputation, and secondly clustering articles based on their content relations, and then the articles are selected and recommended from each cluster based on their reputation ranks.
Diese Arbeit umfasst die Archivierung, Visualisierung anhand bioinformatischer Methoden und Interpretation eines vorhandenen Messdatensatz (Element [ICP-MS]-, Ionen [IC]- und Metabolitdaten [RP-HPLC und GC/TOF-MS]) der Pflanze Arabidopsis thaliana getrennt in Blätter und Wurzeln. Die Pflanzen wurden den sechs Mangelsituationen der Nährstoffe Eisen, Kalium, Magnesium, Stickstoff, Phosphor und Schwefel ausgesetzt und zu neun Messzeitpunkten [0.5-, 1-, 2-, 3-, 4-, 5-, 6-, 7-in Tagen und „resupply“ (vier Stunden nach dem vierten Tag)] analysiert. Es erfolgte die Integration der Messdaten in eine SQlite-Datenbank. Die Veranschaulichung erfolgte mit Hilfe der Programmiersprache R. Anhand einiger Pakete zur Erweiterung des Funktionsumfangs von R wurde erstens eine Schnittstelle zur SQLite- Datenbank hergestellt, was ein Abfragen an diese ermöglichte und zweitens verhalfen sie zu der Erstellung einer Reihe zusätzlicher Darstellungsformen (Heatmap, Wireframe, PCA). Selbstgeschriebene Skripte erlaubten den Datenzugriff und die grafische Ausgabe als z. B. Heatmaps. In der Entstehung dieser Arbeit sind weiterhin zwei weitere Visualisierungsformen von PCA-Daten entwickelt worden: Das Abstandsdiagramm und die animierte PCA. Beides sind hilfreiche Werkzeuge zur Interpretation von PCA-Plots eines zeitlichen Verlaufes. Anhand der Darstellungen der Element- und Ionendaten ließen sich die Nährstoffmangelsituationen durch Abnahme der entsprechenden Totalelemente und Ionen nachweisen. Weiterhin sind starke Ähnlichkeiten der durch RP-HPLC bestimmten Metaboliten unter Eisen-, Kalium und Magnesiummangel erkannt worden. Allerdings gibt es nur eine geringe Anzahl an Interkationen der Metabolitgehalte, da der Großteil der Metabolitlevel im Vergleich zur Kontrolle unverändert blieb. Der Literaturvergleich mit zwei Publikationen, die den Phosphat- und Schwefelmangel in Arabidopsis thaliana untersuchten, zeigte ein durchwachsenes Ergebnis. Einerseits gab es eine gleiche Tendenz der verglichenen Aminosäuren zu verzeichen, aber andererseits wiesen die Visualisierungen auch Gegensätzlichkeiten auf. Der Vergleich der mit RP-HPLC und GC/TOF-MS gemessenen Metaboliten erbrachte ein sehr kontroverses Ergebnis. Zum einen wurden Übereinstimmungen der gleichen Metaboliten durch gemeinsame Cluster in den Heatmaps beobachtet, zum anderen auch Widersprüche, exemplarisch in den Abstandsdiagrammen der Blätterdaten jedes Verfahrens, in welchen unterschiedliche Abstandshöhepunkte erkennbar sind.
Exploratory Data Analysis
(2014)
In bioinformatics the term exploratory data analysis refers to different methods to get an overview of large biological data sets. Hence, it helps to create a framework for further analysis and hypothesis testing. The workflow facilitates this first important step of the data analysis created by high-throughput technologies. The results are different plots showing the structure of the measurements. The goal of the workflow is the automatization of the exploratory data analysis, but also the flexibility should be guaranteed. The basic tool is the free software R.
Deciphering the functioning of biological networks is one of the central tasks in systems biology. In particular, signal transduction networks are crucial for the understanding of the cellular response to external and internal perturbations. Importantly, in order to cope with the complexity of these networks, mathematical and computational modeling is required. We propose a computational modeling framework in order to achieve more robust discoveries in the context of logical signaling networks. More precisely, we focus on modeling the response of logical signaling networks by means of automated reasoning using Answer Set Programming (ASP). ASP provides a declarative language for modeling various knowledge representation and reasoning problems. Moreover, available ASP solvers provide several reasoning modes for assessing the multitude of answer sets. Therefore, leveraging its rich modeling language and its highly efficient solving capacities, we use ASP to address three challenging problems in the context of logical signaling networks: learning of (Boolean) logical networks, experimental design, and identification of intervention strategies. Overall, the contribution of this thesis is three-fold. Firstly, we introduce a mathematical framework for characterizing and reasoning on the response of logical signaling networks. Secondly, we contribute to a growing list of successful applications of ASP in systems biology. Thirdly, we present a software providing a complete pipeline for automated reasoning on the response of logical signaling networks.
Das Training sozioemotionaler Kompetenzen ist gerade für Menschen mit Autismus nützlich. Ein solches Training kann mithilfe einer spielbasierten Anwendung effektiv gestaltet werden. Zwei Minispiele, Mimikry und Emo-Mahjong, wurden realisiert und hinsichtlich User Experience evaluiert. Die jeweiligen Konzepte und die Evaluationsergebnisse sollen hier vorgestellt werden.
This thesis addresses real-time rendering techniques for 3D information lenses based on the focus & context metaphor. It analyzes, conceives, implements, and reviews its applicability to objects and structures of virtual 3D city models. In contrast to digital terrain models, the application of focus & context visualization to virtual 3D city models is barely researched. However, the purposeful visualization of contextual data of is extreme importance for the interactive exploration and analysis of this field. Programmable hardware enables the implementation of new lens techniques, that allow the augmentation of the perceptive and cognitive quality of the visualization compared to classical perspective projections. A set of 3D information lenses is integrated into a 3D scene-graph system: • Occlusion lenses modify the appearance of virtual 3D city model objects to resolve their occlusion and consequently facilitate the navigation. • Best-view lenses display city model objects in a priority-based manner and mediate their meta information. Thus, they support exploration and navigation of virtual 3D city models. • Color and deformation lenses modify the appearance and geometry of 3D city models to facilitate their perception. The presented techniques for 3D information lenses and their application to virtual 3D city models clarify their potential for interactive visualization and form a base for further development.
Interactive rendering techniques for focus+context visualization of 3D geovirtual environments
(2013)
This thesis introduces a collection of new real-time rendering techniques and applications for focus+context visualization of interactive 3D geovirtual environments such as virtual 3D city and landscape models. These environments are generally characterized by a large number of objects and are of high complexity with respect to geometry and textures. For these reasons, their interactive 3D rendering represents a major challenge. Their 3D depiction implies a number of weaknesses such as occlusions, cluttered image contents, and partial screen-space usage. To overcome these limitations and, thus, to facilitate the effective communication of geo-information, principles of focus+context visualization can be used for the design of real-time 3D rendering techniques for 3D geovirtual environments (see Figure). In general, detailed views of a 3D geovirtual environment are combined seamlessly with abstracted views of the context within a single image. To perform the real-time image synthesis required for interactive visualization, dedicated parallel processors (GPUs) for rasterization of computer graphics primitives are used. For this purpose, the design and implementation of appropriate data structures and rendering pipelines are necessary. The contribution of this work comprises the following five real-time rendering methods: • The rendering technique for 3D generalization lenses enables the combination of different 3D city geometries (e.g., generalized versions of a 3D city model) in a single image in real time. The method is based on a generalized and fragment-precise clipping approach, which uses a compressible, raster-based data structure. It enables the combination of detailed views in the focus area with the representation of abstracted variants in the context area. • The rendering technique for the interactive visualization of dynamic raster data in 3D geovirtual environments facilitates the rendering of 2D surface lenses. It enables a flexible combination of different raster layers (e.g., aerial images or videos) using projective texturing for decoupling image and geometry data. Thus, various overlapping and nested 2D surface lenses of different contents can be visualized interactively. • The interactive rendering technique for image-based deformation of 3D geovirtual environments enables the real-time image synthesis of non-planar projections, such as cylindrical and spherical projections, as well as multi-focal 3D fisheye-lenses and the combination of planar and non-planar projections. • The rendering technique for view-dependent multi-perspective views of 3D geovirtual environments, based on the application of global deformations to the 3D scene geometry, can be used for synthesizing interactive panorama maps to combine detailed views close to the camera (focus) with abstract views in the background (context). This approach reduces occlusions, increases the usage the available screen space, and reduces the overload of image contents. • The object-based and image-based rendering techniques for highlighting objects and focus areas inside and outside the view frustum facilitate preattentive perception. The concepts and implementations of interactive image synthesis for focus+context visualization and their selected applications enable a more effective communication of spatial information, and provide building blocks for design and development of new applications and systems in the field of 3D geovirtual environments.
The usage of mobile devices is rapidly growing with Android being the most prevalent mobile operating system. Thanks to the vast variety of mobile applications, users are preferring smartphones over desktops for day to day tasks like Internet surfing. Consequently, smartphones store a plenitude of sensitive data. This data together with the high values of smartphones make them an attractive target for device/data theft (thieves/malicious applications).
Unfortunately, state-of-the-art anti-theft solutions do not work if they do not have an active network connection, e.g., if the SIM card was removed from the device. In the majority of these cases, device owners permanently lose their smartphone together with their personal data, which is even worse.
Apart from that malevolent applications perform malicious activities to steal sensitive information from smartphones. Recent research considered static program analysis to detect dangerous data leaks. These analyses work well for data leaks due to inter-component communication, but suffer from shortcomings for inter-app communication with respect to precision, soundness, and scalability.
This thesis focuses on enhancing users' privacy on Android against physical device loss/theft and (un)intentional data leaks. It presents three novel frameworks: (1) ThiefTrap, an anti-theft framework for Android, (2) IIFA, a modular inter-app intent information flow analysis of Android applications, and (3) PIAnalyzer, a precise approach for PendingIntent vulnerability analysis.
ThiefTrap is based on a novel concept of an anti-theft honeypot account that protects the owner's data while preventing a thief from resetting the device.
We implemented the proposed scheme and evaluated it through an empirical user study with 35 participants. In this study, the owner's data could be protected, recovered, and anti-theft functionality could be performed unnoticed from the thief in all cases.
IIFA proposes a novel approach for Android's inter-component/inter-app communication (ICC/IAC) analysis. Our main contribution is the first fully automatic, sound, and precise ICC/IAC information flow analysis that is scalable for realistic apps due to modularity, avoiding combinatorial explosion: Our approach determines communicating apps using short summaries rather than inlining intent calls between components and apps, which requires simultaneously analyzing all apps installed on a device.
We evaluate IIFA in terms of precision, recall, and demonstrate its scalability to a large corpus of real-world apps. IIFA reports 62 problematic ICC-/IAC-related information flows via two or more apps/components.
PIAnalyzer proposes a novel approach to analyze PendingIntent related vulnerabilities. PendingIntents are a powerful and universal feature of Android for inter-component communication. We empirically evaluate PIAnalyzer on a set of 1000 randomly selected applications and find 1358 insecure usages of PendingIntents, including 70 severe vulnerabilities.
Biology has made great progress in identifying and measuring the building blocks of life. The availability of high-throughput methods in molecular biology has dramatically accelerated the growth of biological knowledge for various organisms. The advancements in genomic, proteomic and metabolomic technologies allow for constructing complex models of biological systems. An increasing number of biological repositories is available on the web, incorporating thousands of biochemical reactions and genetic regulations. Systems Biology is a recent research trend in life science, which fosters a systemic view on biology. In Systems Biology one is interested in integrating the knowledge from all these different sources into models that capture the interaction of these entities. By studying these models one wants to understand the emerging properties of the whole system, such as robustness. However, both measurements as well as biological networks are prone to considerable incompleteness, heterogeneity and mutual inconsistency, which makes it highly non-trivial to draw biologically meaningful conclusions in an automated way. Therefore, we want to promote Answer Set Programming (ASP) as a tool for discrete modeling in Systems Biology. ASP is a declarative problem solving paradigm, in which a problem is encoded as a logic program such that its answer sets represent solutions to the problem. ASP has intrinsic features to cope with incompleteness, offers a rich modeling language and highly efficient solving technology. We present ASP solutions, for the analysis of genetic regulatory networks, determining consistency with observed measurements and identifying minimal causes for inconsistency. We extend this approach for computing minimal repairs on model and data that restore consistency. This method allows for predicting unobserved data even in case of inconsistency. Further, we present an ASP approach to metabolic network expansion. This approach exploits the easy characterization of reachability in ASP and its various reasoning methods, to explore the biosynthetic capabilities of metabolic reaction networks and generate hypotheses for extending the network. Finally, we present the BioASP library, a Python library which encapsulates our ASP solutions into the imperative programming paradigm. The library allows for an easy integration of ASP solution into system rich environments, as they exist in Systems Biology.
Geocoder accuracy ranking
(2014)
Finding an address on a map is sometimes tricky: the chosen map application may be unfamiliar with the enclosed region. There are several geocoders on the market, they have different databases and algorithms to compute the query. Consequently, the geocoding results differ in their quality. Fortunately the geocoders provide a rich set of metadata. The workflow described in this paper compares this metadata with the aim to find out which geocoder is offering the best-fitting coordinate for a given address.
In recent years, many efforts have been made to apply image processing techniques for plant leaf identification. However, categorizing leaf images at the cultivar/variety level, because of the very low inter-class variability, is still a challenging task. In this research, we propose an automatic discriminative method based on convolutional neural networks (CNNs) for classifying 12 different cultivars of common beans that belong to three various species. We show that employing advanced loss functions, such as Additive Angular Margin Loss and Large Margin Cosine Loss, instead of the standard softmax loss function for the classification can yield better discrimination between classes and thereby mitigate the problem of low inter-class variability. The method was evaluated by classifying species (level I), cultivars from the same species (level II), and cultivars from different species (level III), based on images from the leaf foreside and backside. The results indicate that the performance of the classification algorithm on the leaf backside image dataset is superior. The maximum mean classification accuracies of 95.86, 91.37 and 86.87% were obtained at the levels I, II and III, respectively. The proposed method outperforms the previous relevant works and provides a reliable approach for plant cultivars identification.
The use of neural networks is considered as the state of the art in the field of image classification. A large number of different networks are available for this purpose, which, appropriately trained, permit a high level of classification accuracy. Typically, these networks are applied to uncompressed image data, since a corresponding training was also carried out using image data of similar high quality. However, if image data contains image errors, the classification accuracy deteriorates drastically. This applies in particular to coding artifacts which occur due to image and video compression. Typical application scenarios for video compression are narrowband transmission channels for which video coding is required but a subsequent classification is to be carried out on the receiver side. In this paper we present a special H.264/Advanced Video Codec (AVC) based video codec that allows certain regions of a picture to be coded with near constant picture quality in order to allow a reliable classification using neural networks, whereas the remaining image will be coded using constant bit rate. We have combined this feature with the ability to run with lowest latency properties, which is usually also required in remote control applications scenarios. The codec has been implemented as a fully hardwired High Definition video capable hardware architecture which is suitable for Field Programmable Gate Arrays.
In der vorliegenden Arbeit wird ein Unterrichtsmodell zur Kompetenzentwicklung mit Informatiksystemen für die Sekundarstufe II vorgestellt. Der Bedarf wird u. a. damit begründet, dass Informatiksysteme zu Beginn des 21. Jahrhunderts allgegenwärtig sind (Kapitel 1). Für Kompetenzentwicklung mit Informatiksystemen sind diese in ihrer Einheit aus Hardware, Software und Vernetzung anhand ihres nach außen sichtbaren Verhaltens, der inneren Struktur und Implementierungsaspekten zu analysieren. Ausgehend vom Kompetenzbegriff (Kapitel 2) und dem Informatiksystembegriff (Kapitel 3) erfolgt eine Analyse des fachdidaktischen Forschungsstandes zur Kompetenzentwicklung mit Informatiksystemen. Die Ergebnisse lassen sich in die Bereiche (1) Bildungsziele, (2) Unterrichtsinhalte, (3) Lehr-Lernmethodik und (4) Lehr-Lernmedien aufteilen (Kapitel 4). In Kapitel 5 wird die Unterrichtsmodellentwicklung beschrieben. Den Zugang zu Informatiksystemen bildet in der vorliegenden Dissertationsschrift das nach außen sichtbare Verhalten. Es erfolgt eine Fokussierung auf vernetzte fundamentale Ideen der Informatik und Strukturmodelle von Informatiksystemen als Unterrichtsinhalte. Es wird begründet, dass ausgewählte objektorientierte Entwurfsmuster vernetzte fundamentale Ideen repräsentieren. In Abschnitt 5.4 werden dementsprechend Entwurfsmuster als Wissensrepräsentation für vernetzte fundamentale Ideen klassifiziert. Das systematische Erkunden des Verhaltens von Informatiksystemen wird im Informatikunterricht bisher kaum thematisiert. Es werden Schülertätigkeiten in Anlehnung an Unterrichtsexperimente angegeben, die Schüler unterstützen, Informatiksysteme bewusst und gezielt anzuwenden (Abschnitt 5.5). Bei dieser Lehr-Lernmethodik werden das nach außen sichtbare Verhalten von Informatiksystemen, im Sinne einer Black-Box, und das Wechselspiel von Verhalten und Struktur bei vorliegender Implementierung des Systems als White-Box analysiert. Die Adressierung schrittweise höherer kognitiver Niveaustufen wird in die Entwicklung einbezogen. Unterstützend wird für das Unterrichtsmodell lernförderliche Software gestaltet, die vernetzte fundamentale Ideen in Entwurfsmustern und das Experimentieren aufgreift (Abschnitt 5.6). Schwerpunkte bilden im Unterrichtsmodell zwei Arten von lernförderlicher Software: (1) Die Lernsoftware Pattern Park wurde von einer studentischen Projektgruppe entwickelt. In ihr können in Entwurfsmustern enthaltene fundamentale Ideen der Informatik über ihren Lebensweltbezug im Szenario eines Freizeitparks analysiert werden. (2) Als weitere Art Lernsoftware werden kleine Programme eingesetzt, deren innere Struktur durch ausgewählte Entwurfsmuster gebildet und deren Verhalten direkt durch die darin enthaltenen fundamentalen Ideen bestimmt wird. Diese Programme können durch die Experimente im Unterricht systematisch untersucht werden. Mit dem Ziel, die normative Perspektive um Rückkopplung mit der Praxis zu ergänzen, werden zwei Erprobungen im Informatikunterricht vorgenommen. Diese liefern Erkenntnisse zur Machbarkeit des Unterrichtsmodells und dessen Akzeptanz durch die Schüler (Kapitel 6 und 8). Exemplarisch umgesetzt werden die Themen Zugriffskontrolle mit dem Proxymuster, Iteration mit dem Iteratormuster und Systemzustände mit dem Zustandsmuster. Der intensive Austausch mit Informatiklehrpersonen in der Kooperationsschule über Informatiksysteme und Kompetenzentwicklung sowie die Durchführung von zwei Lehrerfortbildungen ergänzen die Beobachtungen im unterrichtlichen Geschehen. Die erste Unterrichtserprobung resultiert in einer Weiterentwicklung des Unterrichtsmodells zu Informatiksystemen und Kompetenzentwicklung (Kapitel 7). Darin erfolgt eine Fokussierung auf das nach außen sichtbare Verhalten von Informatiksystemen und eine Verfeinerung der Perspektiven auf innere Struktur und ausgewählte Implementierungsaspekte. Anschließend wird die zweite Unterrichtserprobung durchgeführt und evaluiert (Kapitel 8). Am Schluss der Forschungsarbeit steht ein in empirischen Phasen erprobtes Unterrichtsmodell.
Business process models are used within a range of organizational initiatives, where every stakeholder has a unique perspective on a process and demands the respective model. As a consequence, multiple process models capturing the very same business process coexist. Keeping such models in sync is a challenge within an ever changing business environment: once a process is changed, all its models have to be updated. Due to a large number of models and their complex relations, model maintenance becomes error-prone and expensive. Against this background, business process model abstraction emerged as an operation reducing the number of stored process models and facilitating model management. Business process model abstraction is an operation preserving essential process properties and leaving out insignificant details in order to retain information relevant for a particular purpose. Process model abstraction has been addressed by several researchers. The focus of their studies has been on particular use cases and model transformations supporting these use cases. This thesis systematically approaches the problem of business process model abstraction shaping the outcome into a framework. We investigate the current industry demand in abstraction summarizing it in a catalog of business process model abstraction use cases. The thesis focuses on one prominent use case where the user demands a model with coarse-grained activities and overall process ordering constraints. We develop model transformations that support this use case starting with the transformations based on process model structure analysis. Further, abstraction methods considering the semantics of process model elements are investigated. First, we suggest how semantically related activities can be discovered in process models-a barely researched challenge. The thesis validates the designed abstraction methods against sets of industrial process models and discusses the method implementation aspects. Second, we develop a novel model transformation, which combined with the related activity discovery allows flexible non-hierarchical abstraction. In this way this thesis advocates novel model transformations that facilitate business process model management and provides the foundations for innovative tool support.
Geometric generalization is a fundamental concept in the digital mapping process. An increasing amount of spatial data is provided on the web as well as a range of tools to process it. This jABC workflow is used for the automatic testing of web-based generalization services like mapshaper.org by executing its functionality, overlaying both datasets before and after the transformation and displaying them visually in a .tif file. Mostly Web Services and command line tools are used to build an environment where ESRI shapefiles can be uploaded, processed through a chosen generalization service and finally visualized in Irfanview.
Geospatial data has become a natural part of a growing number of information systems and services in the economy, society, and people's personal lives. In particular, virtual 3D city and landscape models constitute valuable information sources within a wide variety of applications such as urban planning, navigation, tourist information, and disaster management. Today, these models are often visualized in detail to provide realistic imagery. However, a photorealistic rendering does not automatically lead to high image quality, with respect to an effective information transfer, which requires important or prioritized information to be interactively highlighted in a context-dependent manner.
Approaches in non-photorealistic renderings particularly consider a user's task and camera perspective when attempting optimal expression, recognition, and communication of important or prioritized information. However, the design and implementation of non-photorealistic rendering techniques for 3D geospatial data pose a number of challenges, especially when inherently complex geometry, appearance, and thematic data must be processed interactively. Hence, a promising technical foundation is established by the programmable and parallel computing architecture of graphics processing units.
This thesis proposes non-photorealistic rendering techniques that enable both the computation and selection of the abstraction level of 3D geospatial model contents according to user interaction and dynamically changing thematic information. To achieve this goal, the techniques integrate with hardware-accelerated rendering pipelines using shader technologies of graphics processing units for real-time image synthesis. The techniques employ principles of artistic rendering, cartographic generalization, and 3D semiotics—unlike photorealistic rendering—to synthesize illustrative renditions of geospatial feature type entities such as water surfaces, buildings, and infrastructure networks. In addition, this thesis contributes a generic system that enables to integrate different graphic styles—photorealistic and non-photorealistic—and provide their seamless transition according to user tasks, camera view, and image resolution.
Evaluations of the proposed techniques have demonstrated their significance to the field of geospatial information visualization including topics such as spatial perception, cognition, and mapping. In addition, the applications in illustrative and focus+context visualization have reflected their potential impact on optimizing the information transfer regarding factors such as cognitive load, integration of non-realistic information, visualization of uncertainty, and visualization on small displays.
Nowadays, model-driven engineering (MDE) promises to ease software development by decreasing the inherent complexity of classical software development. In order to deliver on this promise, MDE increases the level of abstraction and automation, through a consideration of domain-specific models (DSMs) and model operations (e.g. model transformations or code generations). DSMs conform to domain-specific modeling languages (DSMLs), which increase the level of abstraction, and model operations are first-class entities of software development because they increase the level of automation. Nevertheless, MDE has to deal with at least two new dimensions of complexity, which are basically caused by the increased linguistic and technological heterogeneity. The first dimension of complexity is setting up an MDE environment, an activity comprised of the implementation or selection of DSMLs and model operations. Setting up an MDE environment is both time-consuming and error-prone because of the implementation or adaptation of model operations. The second dimension of complexity is concerned with applying MDE for actual software development. Applying MDE is challenging because a collection of DSMs, which conform to potentially heterogeneous DSMLs, are required to completely specify a complex software system. A single DSML can only be used to describe a specific aspect of a software system at a certain level of abstraction and from a certain perspective. Additionally, DSMs are usually not independent but instead have inherent interdependencies, reflecting (partial) similar aspects of a software system at different levels of abstraction or from different perspectives. A subset of these dependencies are applications of various model operations, which are necessary to keep the degree of automation high. This becomes even worse when addressing the first dimension of complexity. Due to continuous changes, all kinds of dependencies, including the applications of model operations, must also be managed continuously. This comprises maintaining the existence of these dependencies and the appropriate (re-)application of model operations. The contribution of this thesis is an approach that combines traceability and model management to address the aforementioned challenges of configuring and applying MDE for software development. The approach is considered as a traceability approach because it supports capturing and automatically maintaining dependencies between DSMs. The approach is considered as a model management approach because it supports managing the automated (re-)application of heterogeneous model operations. In addition, the approach is considered as a comprehensive model management. Since the decomposition of model operations is encouraged to alleviate the first dimension of complexity, the subsequent composition of model operations is required to counteract their fragmentation. A significant portion of this thesis concerns itself with providing a method for the specification of decoupled yet still highly cohesive complex compositions of heterogeneous model operations. The approach supports two different kinds of compositions - data-flow compositions and context compositions. Data-flow composition is used to define a network of heterogeneous model operations coupled by sharing input and output DSMs alone. Context composition is related to a concept used in declarative model transformation approaches to compose individual model transformation rules (units) at any level of detail. In this thesis, context composition provides the ability to use a collection of dependencies as context for the composition of other dependencies, including model operations. In addition, the actual implementation of model operations, which are going to be composed, do not need to implement any composition concerns. The approach is realized by means of a formalism called an executable and dynamic hierarchical megamodel, based on the original idea of megamodels. This formalism supports specifying compositions of dependencies (traceability and model operations). On top of this formalism, traceability is realized by means of a localization concept, and model management by means of an execution concept.
Die 8. Fachtagung für Hochschuldidaktik der Informatik (HDI) fand im September 2018 zusammen mit der Deutschen E-Learning Fachtagung Informatik (DeLFI) unter dem gemeinsamen Motto „Digitalisierungswahnsinn? - Wege der Bildungstransformationen“ in Frankfurt statt.
Dabei widmet sich die HDI allen Fragen der informatischen Bildung im Hochschulbereich. Schwerpunkte bildeten in diesem Jahr u. a.:
- Analyse der Inhalte und anzustrebenden Kompetenzen in Informatikveranstaltungen
- Programmieren lernen & Einstieg in Softwareentwicklung
- Spezialthemen: Data Science, Theoretische Informatik und Wissenschaftliches Arbeiten
Die Fachtagung widmet sich ausgewählten Fragestellungen dieser Themenkomplexe, die durch Vorträge ausgewiesener Experten und durch eingereichte Beiträge intensiv behandelt werden.
With the jABC it is possible to realize workflows for numerous questions in different fields. The goal of this project was to create a workflow for the identification of differentially expressed genes. This is of special interest in biology, for it gives the opportunity to get a better insight in cellular changes due to exogenous stress, diseases and so on. With the knowledge that can be derived from the differentially expressed genes in diseased tissues, it becomes possible to find new targets for treatment.
Analyses of metagenomes in life sciences present new opportunities as well as challenges to the scientific community and call for advanced computational methods and workflows. The large amount of data collected from samples via next-generation sequencing (NGS) technologies render manual approaches to sequence comparison and annotation unsuitable. Rather, fast and efficient computational pipelines are needed to provide comprehensive statistics and summaries and enable the researcher to choose appropriate tools for more specific analyses. The workflow presented here builds upon previous pipelines designed for automated clustering and annotation of raw sequence reads obtained from next-generation sequencing technologies such as 454 and Illumina. Employing specialized algorithms, the sequence reads are processed at three different levels. First, raw reads are clustered at high similarity cutoff to yield clusters which can be exported as multifasta files for further analyses. Independently, open reading frames (ORFs) are predicted from raw reads and clustered at two strictness levels to yield sets of non-redundant sequences and ORF families. Furthermore, single ORFs are annotated by performing searches against the Pfam database
BCH Codes mit kombinierter Korrektur und Erkennung In dieser Arbeit wird auf Grundlage des BCH Codes untersucht, wie eine Fehlerkorrektur mit einer Erkennung höherer Fehleranzahlen kombiniert werden kann. Mit dem Verfahren der 1-Bit Korrektur mit zusätzlicher Erkennung höherer Fehler wurde ein Ansatz entwickelt, welcher die Erkennung zusätzlicher Fehler durch das parallele Lösen einfacher Gleichungen der Form s_x = s_1^x durchführt. Die Anzahl dieser Gleichungen ist linear zu der Anzahl der zu überprüfenden höheren Fehler.
In dieser Arbeit wurde zusätzlich für bis zu 4-Bit Korrekturen mit zusätzlicher Erkennung höherer Fehler ein weiterer allgemeiner Ansatz vorgestellt. Dabei werden parallel für alle korrigierbaren Fehleranzahlen spekulative Fehlerkorrekturen durchgeführt. Aus den bestimmten Fehlerstellen werden spekulative Syndromkomponenten erzeugt, durch welche die Fehlerstellen bestätigt und höhere erkennbare Fehleranzahlen ausgeschlossen werden können. Die vorgestellten Ansätze unterscheiden sich von dem in entwickelten Ansatz, bei welchem die Anzahl der Fehlerstellen durch die Berechnung von Determinanten in absteigender Reihenfolge berechnet wird, bis die erste Determinante 0 bildet. Bei dem bekannten Verfahren ist durch die Berechnung der Determinanten eine faktorielle Anzahl an Berechnungen in Relation zu der Anzahl zu überprüfender Fehler durchzuführen. Im Vergleich zu dem bekannten sequentiellen Verfahrens nach Berlekamp Massey besitzen die Berechnungen im vorgestellten Ansatz simple Gleichungen und können parallel durchgeführt werden.Bei dem bekannten Verfahren zur parallelen Korrektur von 4-Bit Fehlern ist eine Gleichung vierten Grades im GF(2^m) zu lösen. Dies erfolgt, indem eine Hilfsgleichung dritten Grades und vier Gleichungen zweiten Grades parallel gelöst werden. In der vorliegenden Arbeit wurde gezeigt, dass sich eine Gleichung zweiten Grades einsparen lässt, wodurch sich eine Vereinfachung der Hardware bei einer parallelen Realisierung der 4-Bit Korrektur ergibt. Die erzielten Ergebnisse wurden durch umfangreiche Simulationen in Software und Hardwareimplementierungen überprüft.
Advances in biotechnologies rapidly increase the number of molecules of a cell which can be observed simultaneously. This includes expression levels of thousands or ten-thousands of genes as well as concentration levels of metabolites or proteins. Such Profile data, observed at different times or at different experimental conditions (e.g., heat or dry stress), show how the biological experiment is reflected on the molecular level. This information is helpful to understand the molecular behaviour and to identify molecules or combination of molecules that characterise specific biological condition (e.g., disease). This work shows the potentials of component extraction algorithms to identify the major factors which influenced the observed data. This can be the expected experimental factors such as the time or temperature as well as unexpected factors such as technical artefacts or even unknown biological behaviour. Extracting components means to reduce the very high-dimensional data to a small set of new variables termed components. Each component is a combination of all original variables. The classical approach for that purpose is the principal component analysis (PCA). It is shown that, in contrast to PCA which maximises the variance only, modern approaches such as independent component analysis (ICA) are more suitable for analysing molecular data. The condition of independence between components of ICA fits more naturally our assumption of individual (independent) factors which influence the data. This higher potential of ICA is demonstrated by a crossing experiment of the model plant Arabidopsis thaliana (Thale Cress). The experimental factors could be well identified and, in addition, ICA could even detect a technical artefact. However, in continuously observations such as in time experiments, the data show, in general, a nonlinear distribution. To analyse such nonlinear data, a nonlinear extension of PCA is used. This nonlinear PCA (NLPCA) is based on a neural network algorithm. The algorithm is adapted to be applicable to incomplete molecular data sets. Thus, it provides also the ability to estimate the missing data. The potential of nonlinear PCA to identify nonlinear factors is demonstrated by a cold stress experiment of Arabidopsis thaliana. The results of component analysis can be used to build a molecular network model. Since it includes functional dependencies it is termed functional network. Applied to the cold stress data, it is shown that functional networks are appropriate to visualise biological processes and thereby reveals molecular dynamics.
Cloud-RAID
(2014)
Emotions are a central element of human experience. They occur with high frequency in everyday life and play an important role in decision making. However, currently there is no consensus among researchers on what constitutes an emotion and on how emotions should be investigated. This dissertation identifies three problems of current emotion research: the problem of ground truth, the problem of incomplete constructs and the problem of optimal representation. I argue for a focus on the detailed measurement of emotion manifestations with computer-aided methods to solve these problems. This approach is demonstrated in three research projects, which describe the development of methods specific to these problems as well as their application to concrete research questions.
The problem of ground truth describes the practice to presuppose a certain structure of emotions as the a priori ground truth. This determines the range of emotion descriptions and sets a standard for the correct assignment of these descriptions. The first project illustrates how this problem can be circumvented with a multidimensional emotion perception paradigm which stands in contrast to the emotion recognition paradigm typically employed in emotion research. This paradigm allows to calculate an objective difficulty measure and to collect subjective difficulty ratings for the perception of emotional stimuli. Moreover, it enables the use of an arbitrary number of emotion stimuli categories as compared to the commonly used six basic emotion categories. Accordingly, we collected data from 441 participants using dynamic facial expression stimuli from 40 emotion categories. Our findings suggest an increase in emotion perception difficulty with increasing actor age and provide evidence to suggest that young adults, the elderly and men underestimate their emotion perception difficulty. While these effects were predicted from the literature, we also found unexpected and novel results. In particular, the increased difficulty on the objective difficulty measure for female actors and observers stood in contrast to reported findings. Exploratory analyses revealed low relevance of person-specific variables for the prediction of emotion perception difficulty, but highlighted the importance of a general pleasure dimension for the ease of emotion perception.
The second project targets the problem of incomplete constructs which relates to vaguely defined psychological constructs on emotion with insufficient ties to tangible manifestations. The project exemplifies how a modern data collection method such as face tracking data can be used to sharpen these constructs on the example of arousal, a long-standing but fuzzy construct in emotion research. It describes how measures of distance, speed and magnitude of acceleration can be computed from face tracking data and investigates their intercorrelations. We find moderate to strong correlations among all measures of static information on one hand and all measures of dynamic information on the other. The project then investigates how self-rated arousal is tied to these measures in 401 neurotypical individuals and 19 individuals with autism. Distance to the neutral face was predictive of arousal ratings in both groups. Lower mean arousal ratings were found for the autistic group, but no difference in correlation of the measures and arousal ratings could be found between groups. Results were replicated in a high autistic traits group consisting of 41 participants. The findings suggest a qualitatively similar perception of arousal for individuals with and without autism. No correlations between valence ratings and any of the measures could be found which emphasizes the specificity of our tested measures for the construct of arousal.
The problem of optimal representation refers to the search for the best representation of emotions and the assumption that there is a one-fits-all solution. In the third project we introduce partial least squares analysis as a general method to find an optimal representation to relate two high-dimensional data sets to each other. The project demonstrates its applicability to emotion research on the question of emotion perception differences between men and women. The method was used with emotion rating data from 441 participants and face tracking data computed on 306 videos. We found quantitative as well as qualitative differences in the perception of emotional facial expressions between these groups. We showed that women’s emotional perception systematically captured more of the variance in facial expressions. Additionally, we could show that significant differences exist in the way that women and men perceive some facial expressions which could be visualized as concrete facial expression sequences. These expressions suggest differing perceptions of masked and ambiguous facial expressions between the sexes. In order to facilitate use of the developed method by the research community, a package for the statistical environment R was written. Furthermore, to call attention to the method and its usefulness for emotion research, a website was designed that allows users to explore a model of emotion ratings and facial expression data in an interactive fashion.
Eine übliche Erzählung verknüpft lange Studienzeiten und hohe Abbrecherquoten im Informatikstudium zum einen mit der sehr gut bezahlten Nebentätigkeit von Studierenden in der Informatikbranche, die deutlich studienzeitverlängernd sei; zum anderen werde wegen des hohen Bedarfs an Informatikern ein formeller Studienabschluss von den Studierenden häufig als entbehrlich betrachtet und eine Karriere in der Informatikbranche ohne abgeschlossenes Studium begonnen. In dieser Studie, durchgeführt an der Universität Potsdam, untersuchen wir, wie viele Informatikstudierende neben dem Studium innerhalb und außerhalb der Informatikbranche arbeiten, welche Erwartungen sie neben der Bezahlung damit verbinden und wie sich die Tätigkeit auf ihr Studium und ihre spätere berufliche Perspektive auswirkt. Aus aktuellem Anlass interessieren uns auch die Auswirkungen der Covid-19-Pandemie auf die Arbeitstätigkeiten der Informatikstudierenden.
Location analyses are among the most common tasks while working with spatial data and geographic information systems. Automating the most frequently used procedures is therefore an important aspect of improving their usability. In this context, this project aims to design and implement a workflow, providing some basic tools for a location analysis. For the implementation with jABC, the workflow was applied to the problem of finding a suitable location for placing an artificial reef. For this analysis three parameters (bathymetry, slope and grain size of the ground material) were taken into account, processed, and visualized with the The Generic Mapping Tools (GMT), which were integrated into the workflow as jETI-SIBs. The implemented workflow thereby showed that the approach to combine jABC with GMT resulted in an user-centric yet user-friendly tool with high-quality cartographic outputs.
Answer Set Programming faces an increasing popularity for problem solving in various domains. While its modeling language allows us to express many complex problems in an easy way, its solving technology enables their effective resolution. In what follows, we detail some of the key factors of its success. Answer Set Programming [ASP; Brewka et al. Commun ACM 54(12):92–103, (2011)] is seeing a rapid proliferation in academia and industry due to its easy and flexible way to model and solve knowledge-intense combinatorial (optimization) problems. To this end, ASP offers a high-level modeling language paired with high-performance solving technology. As a result, ASP systems provide out-off-the-box, general-purpose search engines that allow for enumerating (optimal) solutions. They are represented as answer sets, each being a set of atoms representing a solution. The declarative approach of ASP allows a user to concentrate on a problem’s specification rather than the computational means to solve it. This makes ASP a prime candidate for rapid prototyping and an attractive tool for teaching key AI techniques since complex problems can be expressed in a succinct and elaboration tolerant way. This is eased by the tuning of ASP’s modeling language to knowledge representation and reasoning (KRR). The resulting impact is nicely reflected by a growing range of successful applications of ASP [Erdem et al. AI Mag 37(3):53–68, 2016; Falkner et al. Industrial applications of answer set programming. K++nstliche Intelligenz (2018)]
The field of machine learning studies algorithms that infer predictive models from data. Predictive models are applicable for many practical tasks such as spam filtering, face and handwritten digit recognition, and personalized product recommendation. In general, they are used to predict a target label for a given data instance. In order to make an informed decision about the deployment of a predictive model, it is crucial to know the model’s approximate performance. To evaluate performance, a set of labeled test instances is required that is drawn from the distribution the model will be exposed to at application time. In many practical scenarios, unlabeled test instances are readily available, but the process of labeling them can be a time- and cost-intensive task and may involve a human expert. This thesis addresses the problem of evaluating a given predictive model accurately with minimal labeling effort. We study an active model evaluation process that selects certain instances of the data according to an instrumental sampling distribution and queries their labels. We derive sampling distributions that minimize estimation error with respect to different performance measures such as error rate, mean squared error, and F-measures. An analysis of the distribution that governs the estimator leads to confidence intervals, which indicate how precise the error estimation is. Labeling costs may vary across different instances depending on certain characteristics of the data. For instance, documents differ in their length, comprehensibility, and technical requirements; these attributes affect the time a human labeler needs to judge relevance or to assign topics. To address this, the sampling distribution is extended to incorporate instance-specific costs. We empirically study conditions under which the active evaluation processes are more accurate than a standard estimate that draws equally many instances from the test distribution. We also address the problem of comparing the risks of two predictive models. The standard approach would be to draw instances according to the test distribution, label the selected instances, and apply statistical tests to identify significant differences. Drawing instances according to an instrumental distribution affects the power of a statistical test. We derive a sampling procedure that maximizes test power when used to select instances, and thereby minimizes the likelihood of choosing the inferior model. Furthermore, we investigate the task of comparing several alternative models; the objective of an evaluation could be to rank the models according to the risk that they incur or to identify the model with lowest risk. An experimental study shows that the active procedure leads to higher test power than the standard test in many application domains. Finally, we study the problem of evaluating the performance of ranking functions, which are used for example for web search. In practice, ranking performance is estimated by applying a given ranking model to a representative set of test queries and manually assessing the relevance of all retrieved items for each query. We apply the concepts of active evaluation and active comparison to ranking functions and derive optimal sampling distributions for the commonly used performance measures Discounted Cumulative Gain and Expected Reciprocal Rank. Experiments on web search engine data illustrate significant reductions in labeling costs.
Software-as-a-Service (SaaS) offers several advantages to both service providers and users. Service providers can benefit from the reduction of Total Cost of Ownership (TCO), better scalability, and better resource utilization. On the other hand, users can use the service anywhere and anytime, and minimize upfront investment by following the pay-as-you-go model. Despite the benefits of SaaS, users still have concerns about the security and privacy of their data. Due to the nature of SaaS and the Cloud in general, the data and the computation are beyond the users' control, and hence data security becomes a vital factor in this new paradigm. Furthermore, in multi-tenant SaaS applications, the tenants become more concerned about the confidentiality of their data since several tenants are co-located onto a shared infrastructure.
To address those concerns, we start protecting the data from the provisioning process by controlling how tenants are being placed in the infrastructure. We present a resource allocation algorithm designed to minimize the risk of co-resident tenants called SecPlace. It enables the SaaS provider to control the resource (i.e., database instance) allocation process while taking into account the security of tenants as a requirement.
Due to the design principles of the multi-tenancy model, tenants follow some degree of sharing on both application and infrastructure levels. Thus, strong security-isolation should be present. Therefore, we develop SignedQuery, a technique that prevents one tenant from accessing others' data. We use the Signing Concept to create a signature that is used to sign the tenant's request, then the server can verifies the signature and recognizes the requesting tenant, and hence ensures that the data to be accessed is belonging to the legitimate tenant.
Finally, Data confidentiality remains a critical concern due to the fact that data in the Cloud is out of users' premises, and hence beyond their control. Cryptography is increasingly proposed as a potential approach to address such a challenge. Therefore, we present SecureDB, a system designed to run SQL-based applications over an encrypted database. SecureDB captures the schema design and analyzes it to understand the internal structure of the data (i.e., relationships between the tables and their attributes). Moreover, we determine the appropriate partialhomomorphic encryption scheme for each attribute where computation is possible even when the data is encrypted.
To evaluate our work, we conduct extensive experiments with di↵erent settings. The main use case in our work is a popular open source HRM application, called OrangeHRM. The results show that our multi-layered approach is practical, provides enhanced security and isolation among tenants, and have a moderate complexity in terms of processing encrypted data.
Mit der 4. Tagung zur Hochschuldidaktik Informatik wird eine Reihe fortgesetzt, die ihren Anfang 1998 in Stuttgart unter der Überschrift „Informatik und Ausbildung“ genommen hat. Seither dienen diese Tagungen den Lehrenden im Bereich der Hochschulinformatik als Forum der Information und des Diskurses über aktuelle didaktische und bildungspolitische Entwicklungen im Bereich der Informatikausbildung. Aktuell zählen dazu insbesondere Fragen der Bildungsrelevanz informatischer Inhalte und der Herausforderung durch eine stärkere Kompetenzorientierung in der Informatik. Die eingereichten Beiträge zur HDI 2010 in Paderborn veranschaulichen unterschiedliche Bemühungen, sich mit relevanten Problemen der Informatikdidaktik an Hochschulen in Deutschland (und z. T. auch im Ausland) auseinanderzusetzen. Aus der Breite des Spektrums der Einreichungen ergaben sich zugleich Probleme bei der Begutachtung. Letztlich konnten von den zahlreichen Einreichungen nur drei die Gutachter so überzeugen, dass sie uneingeschränkt in ihrer Langfassung akzeptiert wurden. Neun weitere Einreichungen waren trotz Kritik überwiegend positiv begutachtet worden, so dass wir diese als Kurzfassung bzw. Diskussionspapier in die Tagung aufgenommen haben.
Mit zunehmender Komplexität technischer Softwaresysteme ist die Nachfrage an produktiveren Methoden und Werkzeugen auch im sicherheitskritischen Umfeld gewachsen. Da insbesondere objektorientierte und modellbasierte Ansätze und Methoden ausgezeichnete Eigenschaften zur Entwicklung großer und komplexer Systeme besitzen, ist zu erwarten, dass diese in naher Zukunft selbst bis in sicherheitskritische Bereiche der Softwareentwicklung vordringen. Mit der Unified Modeling Language Real-Time (UML-RT) wird eine Softwareentwicklungsmethode für technische Systeme durch die Object Management Group (OMG) propagiert. Für den praktischen Einsatz im technischen und sicherheitskritischen Umfeld muss diese Methode nicht nur bestimmte technische Eigenschaften, beispielsweise temporale Analysierbarkeit, besitzen, sondern auch in einen bestehenden Qualitätssicherungsprozess integrierbar sein. Ein wichtiger Aspekt der Integration der UML-RT in ein qualitätsorientiertes Prozessmodell, beispielsweise in das V-Modell, ist die Verfügbarkeit von ausgereiften Konzepten und Methoden für einen systematischen Modultest. Der Modultest dient als erste Qualititätssicherungsphase nach der Implementierung der Fehlerfindung und dem Qualitätsnachweis für jede separat prüfbare Softwarekomponente eines Systems. Während dieser Phase stellt die Durchführung von systematischen Tests die wichtigste Qualitätssicherungsmaßnahme dar. Während zum jetzigen Zeitpunkt zwar ausgereifte Methoden und Werkzeuge für die modellbasierte Softwareentwicklung zur Verfügung stehen, existieren nur wenig überzeugende Lösungen für eine systematische modellbasierte Modulprüfung. Die durchgängige Verwendung ausführbarer Modelle und Codegenerierung stellen wesentliche Konzepte der modellbasierten Softwareentwicklung dar. Sie dienen der konstruktiven Fehlerreduktion durch Automatisierung ansonsten fehlerträchtiger, manueller Vorgänge. Im Rahmen einer modellbasierten Qualitätssicherung sollten diese Konzepte konsequenterweise in die späteren Qualitätssicherungsphasen transportiert werden. Daher ist eine wesentliche Forderung an ein Verfahren zur modellbasierten Modulprüfung ein möglichst hoher Grad an Automatisierung. In aktuellen Entwicklungen hat sich für die Generierung von Testfällen auf Basis von Zustandsautomaten die Verwendung von Model Checking als effiziente und an die vielfältigsten Testprobleme anpassbare Methode bewährt. Der Ansatz des Model Checking stammt ursprünglich aus dem Entwurf von Kommunikationsprotokollen und wurde bereits erfolgreich auf verschiedene Probleme der Modellierung technischer Software angewendet. Insbesondere in der Gegenwart ausführbarer, automatenbasierter Modelle erscheint die Verwendung von Model Checking sinnvoll, das die Existenz einer formalen, zustandsbasierten Spezifikation voraussetzt. Ein ausführbares, zustandsbasiertes Modell erfüllt diese Anforderungen in der Regel. Aus diesen Gründen ist die Wahl eines Model Checking Ansatzes für die Generierung von Testfällen im Rahmen eines modellbasierten Modultestverfahrens eine logische Konsequenz. Obwohl in der aktuellen Spezifikation der UML-RT keine eindeutigen Aussagen über den zur Verhaltensbeschreibung zu verwendenden Formalismus gemacht werden, ist es wahrscheinlich, dass es sich bei der UML-RT um eine zu Real-Time Object-Oriented Modeling (ROOM) kompatible Methode handelt. Alle in dieser Arbeit präsentierten Methoden und Ergebnisse sind somit auf die kommende UML-RT übertragbar und von sehr aktueller Bedeutung. Aus den genannten Gründen verfolgt diese Arbeit das Ziel, die analytische Qualitätssicherung in der modellbasierten Softwareentwicklung mittels einer modellbasierten Methode für den Modultest zu verbessern. Zu diesem Zweck wird eine neuartige Testmethode präsentiert, die auf automatenbasierten Verhaltensmodellen und CTL Model Checking basiert. Die Testfallgenerierung kann weitgehend automatisch erfolgen, um Fehler durch menschlichen Einfluss auszuschließen. Das entwickelte Modultestverfahren ist in die technischen Konzepte Model Driven Architecture und ROOM, beziehungsweise UML-RT, sowie in die organisatorischen Konzepte eines qualitätsorientierten Prozessmodells, beispielsweise das V-Modell, integrierbar.
This paper describes the implementation of a workflow model for service-oriented computing of potential areas for wind turbines in jABC. By implementing a re-executable model the manual effort of a multi-criteria site analysis can be reduced. The aim is to determine the shift of typical geoprocessing tools of geographic information systems (GIS) from the desktop to the web. The analysis is based on a vector data set and mainly uses web services of the “Center for Spatial Information Science and Systems” (CSISS). This paper discusses effort, benefits and problems associated with the use of the web services.
The protein classification workflow described in this report enables users to get information about a novel protein sequence automatically. The information is derived by different bioinformatic analysis tools which calculate or predict features of a protein sequence. Also, databases are used to compare the novel sequence with known proteins.
In this bachelor’s thesis I implement the automatic theorem prover nanoCoP-Ω. This system is the result of porting arithmetic and equality handling procedures first introduced in the automatic theorem prover with arithmetic leanCoP-Ω into the similar system nanoCoP 2.0. To understand these procedures, I first introduce the mathematical background to both automatic theorem proving and arithmetic expressions. I present the predecessor projects leanCoP, nanoCoP and leanCoP-Ω, out of which nanCoP-Ω was developed. This is followed by an extensive description of the concepts the non-clausal connection calculus needed to be extended by, to allow for proving arithmetic expressions and equalities, as well as of their implementation into nanoCoP-Ω. An extensive comparison between both the runtimes and the number of solved problems of the systems nanoCoP-Ω and leanCoP-Ω was made. I come to the conclusion, that nanoCoP-Ω is considerably faster than leanCoP-Ω for small problems, though less well suited for larger problems. Additionally, I was able to construct a non-theorem that nanoCoP-Ω generates a false proof for. I discuss how this pressing issue could be resolved, as well as some possible optimizations and expansions of the system.
Physical computing covers the design and realization of interactive
objects and installations and allows students to develop concrete,
tangible products of the real world that arise from the learners’
imagination. This way, constructionist learning is raised to a level that
enables students to gain haptic experience and thereby concretizes the
virtual. In this paper the defining characteristics of physical computing
are described. Key competences to be gained with physical computing
will be identified.
This work introduces novel internal and external memory algorithms for computing voxel skeletons of massive voxel objects with complex network-like architecture and for converting these voxel skeletons to piecewise linear geometry, that is triangle meshes and piecewise straight lines. The presented techniques help to tackle the challenge of visualizing and analyzing 3d images of increasing size and complexity, which are becoming more and more important in, for example, biological and medical research. Section 2.3.1 contributes to the theoretical foundations of thinning algorithms with a discussion of homotopic thinning in the grid cell model. The grid cell model explicitly represents a cell complex built of faces, edges, and vertices shared between voxels. A characterization of pairs of cells to be deleted is much simpler than characterizations of simple voxels were before. The grid cell model resolves topologically unclear voxel configurations at junctions and locked voxel configurations causing, for example, interior voxels in sets of non-simple voxels. A general conclusion is that the grid cell model is superior to indecomposable voxels for algorithms that need detailed control of topology. Section 2.3.2 introduces a noise-insensitive measure based on the geodesic distance along the boundary to compute two-dimensional skeletons. The measure is able to retain thin object structures if they are geometrically important while ignoring noise on the object's boundary. This combination of properties is not known of other measures. The measure is also used to guide erosion in a thinning process from the boundary towards lines centered within plate-like structures. Geodesic distance based quantities seem to be well suited to robustly identify one- and two-dimensional skeletons. Chapter 6 applies the method to visualization of bone micro-architecture. Chapter 3 describes a novel geometry generation scheme for representing voxel skeletons, which retracts voxel skeletons to piecewise linear geometry per dual cube. The generated triangle meshes and graphs provide a link to geometry processing and efficient rendering of voxel skeletons. The scheme creates non-closed surfaces with boundaries, which contain fewer triangles than a representation of voxel skeletons using closed surfaces like small cubes or iso-surfaces. A conclusion is that thinking specifically about voxel skeleton configurations instead of generic voxel configurations helps to deal with the topological implications. The geometry generation is one foundation of the applications presented in Chapter 6. Chapter 5 presents a novel external memory algorithm for distance ordered homotopic thinning. The presented method extends known algorithms for computing chamfer distance transformations and thinning to execute I/O-efficiently when input is larger than the available main memory. The applied block-wise decomposition schemes are quite simple. Yet it was necessary to carefully analyze effects of block boundaries to devise globally correct external memory variants of known algorithms. In general, doing so is superior to naive block-wise processing ignoring boundary effects. Chapter 6 applies the algorithms in a novel method based on confocal microscopy for quantitative study of micro-vascular networks in the field of microcirculation.
Computer Security deals with the detection and mitigation of threats to computer networks, data, and computing hardware. This
thesis addresses the following two computer security problems: email spam campaign and malware detection.
Email spam campaigns can easily be generated using popular dissemination tools by specifying simple grammars that serve as message templates. A grammar is disseminated to nodes of a bot net, the nodes create messages by instantiating the grammar at random. Email spam campaigns can encompass huge data volumes and therefore pose a threat to the stability of the infrastructure of email service providers that have to store them. Malware -software that serves a malicious purpose- is affecting web servers, client computers via active content, and client computers through executable files. Without the help of malware detection systems it would be easy for malware creators to collect sensitive information or to infiltrate computers.
The detection of threats -such as email-spam messages, phishing messages, or malware- is an adversarial and therefore intrinsically
difficult problem. Threats vary greatly and evolve over time. The detection of threats based on manually-designed rules is therefore
difficult and requires a constant engineering effort. Machine-learning is a research area that revolves around the analysis of data and the discovery of patterns that describe aspects of the data. Discriminative learning methods extract prediction models from data that are optimized to predict a target attribute as accurately as possible. Machine-learning methods hold the promise of automatically identifying patterns that robustly and accurately detect threats. This thesis focuses on the design and analysis of discriminative learning methods for the two computer-security problems under investigation: email-campaign and malware detection.
The first part of this thesis addresses email-campaign detection. We focus on regular expressions as a syntactic framework, because regular expressions are intuitively comprehensible by security engineers and administrators, and they can be applied as a detection mechanism in an extremely efficient manner. In this setting, a prediction model is provided with exemplary messages from an email-spam campaign. The prediction model has to generate a regular expression that reveals the syntactic pattern that underlies the entire campaign, and that a security engineers finds comprehensible and feels confident enough to use the expression to blacklist further messages at the email server. We model this problem as two-stage learning problem with structured input and output spaces which can be solved using standard cutting plane methods. Therefore we develop an appropriate loss function, and derive a decoder for the resulting optimization problem.
The second part of this thesis deals with the problem of predicting whether a given JavaScript or PHP file is malicious or benign. Recent malware analysis techniques use static or dynamic features, or both. In fully dynamic analysis, the software or script is executed and observed for malicious behavior in a sandbox environment. By contrast, static analysis is based on features that can be extracted directly from the program file. In order to bypass static detection mechanisms, code obfuscation techniques are used to spread a malicious program file in many different syntactic variants. Deobfuscating the code before applying a static classifier can be subjected to mostly static code analysis and can overcome the problem of obfuscated malicious code, but on the other hand increases the computational costs of malware detection by an order of magnitude. In this thesis we present a cascaded architecture in which a classifier first performs a static analysis of the original code and -based on the outcome of this first classification step- the code may be deobfuscated and classified again. We explore several types of features including token $n$-grams, orthogonal sparse bigrams, subroutine-hashings, and syntax-tree features and study the robustness of detection methods and feature types against the evolution of malware over time. The developed tool scans very large file collections quickly and accurately.
Each model is evaluated on real-world data and compared to reference methods. Our approach of inferring regular expressions to filter emails belonging to an email spam campaigns leads to models with a high true-positive rate at a very low false-positive rate that is an order of magnitude lower than that of a commercial content-based filter. Our presented system -REx-SVMshort- is being used by a commercial email service provider and complements content-based and IP-address based filtering.
Our cascaded malware detection system is evaluated on a high-quality data set of almost 400,000 conspicuous PHP files and a collection of more than 1,00,000 JavaScript files. From our case study we can conclude that our system can quickly and accurately process large data collections at a low false-positive rate.
Multi-sided platforms (MSP) strongly affect markets and play a crucial part within the digital and networked economy. Although empirical evidence indicates their occurrence in many industries, research has not investigated the game-changing impact of MSP on traditional markets to a sufficient extent. More specifically, we have little knowledge of how MSP affect value creation and customer interaction in entire markets, exploiting the potential of digital technologies to offer new value propositions. Our paper addresses this research gap and provides an initial systematic approach to analyze the impact of MSP on the insurance industry. For this purpose, we analyze the state of the art in research and practice in order to develop a reference model of the value network for the insurance industry. On this basis, we conduct a case-study analysis to discover and analyze roles which are occupied or even newly created by MSP. As a final step, we categorize MSP with regard to their relation to traditional insurance companies, resulting in a classification scheme with four MSP standard types: Competition, Coordination, Cooperation, Collaboration.
Structuring process models
(2012)
One can fairly adopt the ideas of Donald E. Knuth to conclude that process modeling is both a science and an art. Process modeling does have an aesthetic sense. Similar to composing an opera or writing a novel, process modeling is carried out by humans who undergo creative practices when engineering a process model. Therefore, the very same process can be modeled in a myriad number of ways. Once modeled, processes can be analyzed by employing scientific methods. Usually, process models are formalized as directed graphs, with nodes representing tasks and decisions, and directed arcs describing temporal constraints between the nodes. Common process definition languages, such as Business Process Model and Notation (BPMN) and Event-driven Process Chain (EPC) allow process analysts to define models with arbitrary complex topologies. The absence of structural constraints supports creativity and productivity, as there is no need to force ideas into a limited amount of available structural patterns. Nevertheless, it is often preferable that models follow certain structural rules. A well-known structural property of process models is (well-)structuredness. A process model is (well-)structured if and only if every node with multiple outgoing arcs (a split) has a corresponding node with multiple incoming arcs (a join), and vice versa, such that the set of nodes between the split and the join induces a single-entry-single-exit (SESE) region; otherwise the process model is unstructured. The motivations for well-structured process models are manifold: (i) Well-structured process models are easier to layout for visual representation as their formalizations are planar graphs. (ii) Well-structured process models are easier to comprehend by humans. (iii) Well-structured process models tend to have fewer errors than unstructured ones and it is less probable to introduce new errors when modifying a well-structured process model. (iv) Well-structured process models are better suited for analysis with many existing formal techniques applicable only for well-structured process models. (v) Well-structured process models are better suited for efficient execution and optimization, e.g., when discovering independent regions of a process model that can be executed concurrently. Consequently, there are process modeling languages that encourage well-structured modeling, e.g., Business Process Execution Language (BPEL) and ADEPT. However, the well-structured process modeling implies some limitations: (i) There exist processes that cannot be formalized as well-structured process models. (ii) There exist processes that when formalized as well-structured process models require a considerable duplication of modeling constructs. Rather than expecting well-structured modeling from start, we advocate for the absence of structural constraints when modeling. Afterwards, automated methods can suggest, upon request and whenever possible, alternative formalizations that are "better" structured, preferably well-structured. In this thesis, we study the problem of automatically transforming process models into equivalent well-structured models. The developed transformations are performed under a strong notion of behavioral equivalence which preserves concurrency. The findings are implemented in a tool, which is publicly available.
Diese Arbeit befasst sich mit der Entwicklung einer Applikation, welche Infrastrukturdaten über Eisenbahnnetze generiert. Dabei bildet die Erzeugung der topologischen Informationen den Schwerpunkt dieser Arbeit. Der Anwender charakterisiert hierfür vorab das gewünschte Eisenbahnnetz, wobei die geforderten Eigenschaften die Randbedingungen darstellen, die bei der Synthese zu beachten sind. Zur Einhaltung dieser Bedingungen wird die Constraint-Programmierung eingesetzt, welche durch ihr spezielles Programmierparadigma konsistente Lösungen effizient erzeugt. Dies wird u.a. durch die Nachnutzung so genannter globaler Constraints erreicht. Aus diesem Grund wird insbesondere auf den Einsatz der Constraint-Programmierung bei der Modellierung und Implementierung der Applikation eingegangen.
Die öffentliche Verwaltung setzt seit mehreren Jahren E-Government-Anwendungssysteme ein, um ihre Verwaltungsprozesse intensiver mit moderner Informationstechnik zu unterstützen. Da die öffentliche Verwaltung in ihrem Handeln in besonderem Maße an Recht und Gesetz gebunden ist verstärkt und verbreitet sich der Zusammenhang zwischen den Gesetzen und Rechtsvorschriften einerseits und der zur Aufgabenunterstützung eingesetzten Informationstechnik andererseits. Aus Sicht der Softwaretechnik handelt es sich bei diesem Zusammenhang um eine spezielle Form der Verfolgbarkeit von Anforderungen (engl. Traceability), die so genannte Verfolgbarkeit im Vorfeld der Anforderungsspezifikation (Pre-Requirements Specification Traceability, kurz Pre-RS Traceability), da sie Aspekte betrifft, die relevant sind, bevor die Anforderungen in eine Spezifikation eingeflossen sind (Ursprünge von Anforderungen). Der Ansatz dieser Arbeit leistet einen Beitrag zur Verfolgbarkeit im Vorfeld der Anforderungsspezifikation von E-Government-Anwendungssystemen. Er kombiniert dazu aktuelle Entwicklungen und Standards (insbesondere des World Wide Web Consortium und der Object Management Group) aus den Bereichen Verfolgbarkeit von Anforderungen, Semantic Web, Ontologiesprachen und modellgetriebener Softwareentwicklung. Der Lösungsansatz umfasst eine spezielle Ontologie des Verwaltungshandeln, die mit den Techniken, Methoden und Werkzeugen des Semantic Web eingesetzt wird, um in Texten von Rechtsvorschriften relevante Ursprünge von Anforderungen durch Annotationen mit einer definierten Semantik zu versehen. Darauf aufbauend wird das Ontology Definition Metamodel (ODM) verwendet, um die Annotationen als spezielle Individuen einer Ontologie auf Elemente der Unified Modeling Language (UML) abzubilden. Dadurch entsteht ein neuer Modelltyp Pre-Requirements Model (PRM), der das Vorfeld der Anforderungsspezifikation formalisiert. Modelle diesen Typs können auch verwendet werden, um Aspekte zu formalisieren die sich nicht oder nicht vollständig aus dem Text der Rechtsvorschrift ergeben. Weiterhin bietet das Modell die Möglichkeit zum Anschluss an die modellgetriebene Softwareentwicklung. In der Arbeit wird deshalb eine Erweiterung der Model Driven Architecture (MDA) vorgeschlagen. Zusätzlich zu den etablierten Modelltypen Computation Independent Model (CIM), Platform Independent Model (PIM) und Platform Specific Model (PSM) könnte der Einsatz des PRM Vorteile für die Verfolgbarkeit bringen. Wird die MDA mit dem PRM auf das Vorfeld der Anforderungsspezifikation ausgeweitet, kann eine Transformation des PRM in ein CIM als initiale Anforderungsspezifikation erfolgen, indem der MOF Query View Transformation Standard (QVT) eingesetzt wird. Als Teil des QVT-Standards ist die Aufzeichnung von Verfolgbarkeitsinformationen bei Modelltransformationen verbindlich. Um die semantische Lücke zwischen PRM und CIM zu überbrücken, erfolgt analog zum Einsatz des Plattformmodells (PM) in der PIM nach PSM Transformation der Einsatz spezieller Hilfsmodelle. Es kommen dafür die im Projekt "E-LoGo" an der Universität Potsdam entwickelten Referenzmodelle zum Einsatz. Durch die Aufzeichnung der Abbildung annotierter Textelemente auf Elemente im PRM und der Transformation der Elemente des PRM in Elemente des CIM kann durchgängige Verfolgbarkeit im Vorfeld der Anforderungsspezifikation erreicht werden. Der Ansatz basiert auf einer so genannten Verfolgbarkeitsdokumentation in Form verlinkter Hypertextdokumente, die mittels XSL-Stylesheet erzeugt wurden und eine Verbindung zur graphischen Darstellung des Diagramms (z. B. Anwendungsfall-, Klassendiagramm der UML) haben. Der Ansatz unterstützt die horizontale Verfolgbarkeit zwischen Elementen unterschiedlicher Modelle vorwärts- und rückwärtsgerichtet umfassend. Er bietet außerdem vertikale Verfolgbarkeit, die Elemente des gleichen Modells und verschiedener Modellversionen in Beziehung setzt. Über den offensichtlichen Nutzen einer durchgängigen Verfolgbarkeit im Vorfeld der Anforderungsspezifikation (z. B. Analyse der Auswirkungen einer Gesetzesänderung, Berücksichtigung des vollständigen Kontextes einer Anforderung bei ihrer Priorisierung) hinausgehend, bietet diese Arbeit eine erste Ansatzmöglichkeit für eine Feedback-Schleife im Prozess der Gesetzgebung. Stehen beispielsweise mehrere gleichwertige Gestaltungsoptionen eines Gesetzes zur Auswahl, können die Auswirkungen jeder Option analysiert und der Aufwand ihrer Umsetzung in E-Government-Anwendungen als Auswahlkriterium berücksichtigt werden. Die am 16. März 2011 in Kraft getretene Änderung des NKRG schreibt eine solche Analyse des so genannten „Erfüllungsaufwands“ für Teilbereiche des Verwaltungshandelns bereits heute verbindlich vor. Für diese Analyse kann die vorliegende Arbeit einen Ansatz bieten, um zu fundierten Aussagen über den Änderungsaufwand eingesetzter E-Government-Anwendungssysteme zu kommen.
In the geoinformatics field, remote sensing data is often used for analyzing the characteristics of the current investigation area. This includes DEMs, which are simple raster grids containing grey scales representing the respective elevation values. The project CREADED that is presented in this paper aims at making these monochrome raster images more significant and more intuitively interpretable. For this purpose, an executable interactive model for creating a colored and relief-shaded Digital Elevation Model (DEM) has been designed using the jABC framework. The process is based on standard jABC-SIBs and SIBs that provide specific GIS functions, which are available as Web services, command line tools and scripts.
Bildverarbeitungsanwendungen stellen besondere Ansprüche an das ausführende Rechensystem. Einerseits ist eine hohe Rechenleistung erforderlich. Andererseits ist eine hohe Flexibilität von Vorteil, da die Entwicklung tendentiell ein experimenteller und interaktiver Prozess ist. Für neue Anwendungen tendieren Entwickler dazu, eine Rechenarchitektur zu wählen, die sie gut kennen, anstatt eine Architektur einzusetzen, die am besten zur Anwendung passt. Bildverarbeitungsalgorithmen sind inhärent parallel, doch herkömmliche bildverarbeitende eingebettete Systeme basieren meist auf sequentiell arbeitenden Prozessoren. Im Gegensatz zu dieser "Unstimmigkeit" können hocheffiziente Systeme aus einer gezielten Synergie aus Software- und Hardwarekomponenten aufgebaut werden. Die Konstruktion solcher System ist jedoch komplex und viele Lösungen, wie zum Beispiel grobgranulare Architekturen oder anwendungsspezifische Programmiersprachen, sind oft zu akademisch für einen Einsatz in der Wirtschaft. Die vorliegende Arbeit soll ein Beitrag dazu leisten, die Komplexität von Hardware-Software-Systemen zu reduzieren und damit die Entwicklung hochperformanter on-Chip-Systeme im Bereich Bildverarbeitung zu vereinfachen und wirtschaftlicher zu machen. Dabei wurde Wert darauf gelegt, den Aufwand für Einarbeitung, Entwicklung als auch Erweiterungen gering zu halten. Es wurde ein Entwurfsfluss konzipiert und umgesetzt, welcher es dem Softwareentwickler ermöglicht, Berechnungen durch Hardwarekomponenten zu beschleunigen und das zu Grunde liegende eingebettete System komplett zu prototypisieren. Hierbei werden komplexe Bildverarbeitungsanwendungen betrachtet, welche ein Betriebssystem erfordern, wie zum Beispiel verteilte Kamerasensornetzwerke. Die eingesetzte Software basiert auf Linux und der Bildverarbeitungsbibliothek OpenCV. Die Verteilung der Berechnungen auf Software- und Hardwarekomponenten und die daraus resultierende Ablaufplanung und Generierung der Rechenarchitektur erfolgt automatisch. Mittels einer auf der Antwortmengenprogrammierung basierten Entwurfsraumexploration ergeben sich Vorteile bei der Modellierung und Erweiterung. Die Systemsoftware wird mit OpenEmbedded/Bitbake synthetisiert und die erzeugten on-Chip-Architekturen auf FPGAs realisiert.
Personal fabrication tools, such as 3D printers, are on the way of enabling a future in which non-technical users will be able to create custom objects. However, while the hardware is there, the current interaction model behind existing design tools is not suitable for non-technical users. Today, 3D printers are operated by fabricating the object in one go, which tends to take overnight due to the slow 3D printing technology. Consequently, the current interaction model requires users to think carefully before printing as every mistake may imply another overnight print. Planning every step ahead, however, is not feasible for non-technical users as they lack the experience to reason about the consequences of their design decisions.
In this dissertation, we propose changing the interaction model around personal fabrication tools to better serve this user group. We draw inspiration from personal computing and argue that the evolution of personal fabrication may resemble the evolution of personal computing: Computing started with machines that executed a program in one go before returning the result to the user. By decreasing the interaction unit to single requests, turn-taking systems such as the command line evolved, which provided users with feedback after every input. Finally, with the introduction of direct-manipulation interfaces, users continuously interacted with a program receiving feedback about every action in real-time. In this dissertation, we explore whether these interaction concepts can be applied to personal fabrication as well.
We start with fabricating an object in one go and investigate how to tighten the feedback-cycle on an object-level: We contribute a method called low-fidelity fabrication, which saves up to 90% fabrication time by creating objects as fast low-fidelity previews, which are sufficient to evaluate key design aspects. Depending on what is currently being tested, we propose different conversions that enable users to focus on different parts: faBrickator allows for a modular design in the early stages of prototyping; when users move on WirePrint allows quickly testing an object's shape, while Platener allows testing an object's technical function. We present an interactive editor for each technique and explain the underlying conversion algorithms.
By interacting on smaller units, such as a single element of an object, we explore what it means to transition from systems that fabricate objects in one go to turn-taking systems. We start with a 2D system called constructable: Users draw with a laser pointer onto the workpiece inside a laser cutter. The drawing is captured with an overhead camera. As soon as the the user finishes drawing an element, such as a line, the constructable system beautifies the path and cuts it--resulting in physical output after every editing step. We extend constructable towards 3D editing by developing a novel laser-cutting technique for 3D objects called LaserOrigami that works by heating up the workpiece with the defocused laser until the material becomes compliant and bends down under gravity. While constructable and LaserOrigami allow for fast physical feedback, the interaction is still best described as turn-taking since it consists of two discrete steps: users first create an input and afterwards the system provides physical output.
By decreasing the interaction unit even further to a single feature, we can achieve real-time physical feedback: Input by the user and output by the fabrication device are so tightly coupled that no visible lag exists. This allows us to explore what it means to transition from turn-taking interfaces, which only allow exploring one option at a time, to direct manipulation interfaces with real-time physical feedback, which allow users to explore the entire space of options continuously with a single interaction. We present a system called FormFab, which allows for such direct control. FormFab is based on the same principle as LaserOrigami: It uses a workpiece that when warmed up becomes compliant and can be reshaped. However, FormFab achieves the reshaping not based on gravity, but through a pneumatic system that users can control interactively. As users interact, they see the shape change in real-time.
We conclude this dissertation by extrapolating the current evolution into a future in which large numbers of people use the new technology to create objects. We see two additional challenges on the horizon: sustainability and intellectual property. We investigate sustainability by demonstrating how to print less and instead patch physical objects. We explore questions around intellectual property with a system called Scotty that transfers objects without creating duplicates, thereby preserving the designer's copyright.
Die Dissertation stellt eine neue Herangehensweise an die Lösung der Aufgabe der funktionalen Diagnostik digitaler Systeme vor. In dieser Arbeit wird eine neue Methode für die Fehlererkennung vorgeschlagen, basierend auf der Logischen Ergänzung und der Verwendung von Berger-Codes und dem 1-aus-3 Code. Die neue Fehlererkennungsmethode der Logischen Ergänzung gestattet einen hohen Optimierungsgrad der benötigten Realisationsfläche der konstruierten Fehlererkennungsschaltungen. Außerdem ist eins der wichtigen in dieser Dissertation gelösten Probleme die Synthese vollständig selbstprüfender Schaltungen.
Service-oriented Architectures (SOA) facilitate the provision and orchestration of business services to enable a faster adoption to changing business demands. Web Services provide a technical foundation to implement this paradigm on the basis of XML-messaging. However, the enhanced flexibility of message-based systems comes along with new threats and risks. To face these issues, a variety of security mechanisms and approaches is supported by the Web Service specifications. The usage of these security mechanisms and protocols is configured by stating security requirements in security policies. However, security policy languages for SOA are complex and difficult to create due to the expressiveness of these languages. To facilitate and simplify the creation of security policies, this thesis presents a model-driven approach that enables the generation of complex security policies on the basis of simple security intentions. SOA architects can specify these intentions in system design models and are not required to deal with complex technical security concepts. The approach introduced in this thesis enables the enhancement of any system design modelling languages – for example FMC or BPMN – with security modelling elements. The syntax, semantics, and notion of these elements is defined by our security modelling language SecureSOA. The metamodel of this language provides extension points to enable the integration into system design modelling languages. In particular, this thesis demonstrates the enhancement of FMC block diagrams with SecureSOA. To enable the model-driven generation of security policies, a domain-independent policy model is introduced in this thesis. This model provides an abstraction layer for security policies. Mappings are used to perform the transformation from our model to security policy languages. However, expert knowledge is required to generate instances of this model on the basis of simple security intentions. Appropriate security mechanisms, protocols and options must be chosen and combined to fulfil these security intentions. In this thesis, a formalised system of security patterns is used to represent this knowledge and to enable an automated transformation process. Moreover, a domain-specific language is introduced to state security patterns in an accessible way. On the basis of this language, a system of security configuration patterns is provided to transform security intentions related to data protection and identity management. The formal semantics of the security pattern language enable the verification of the transformation process introduced in this thesis and prove the correctness of the pattern application. Finally, our SOA Security LAB is presented that demonstrates the application of our model-driven approach to facilitate a dynamic creation, configuration, and execution of secure Web Service-based composed applications.
Discriminative Models for Biometric Identification using Micro- and Macro-Movements of the Eyes
(2021)
Human visual perception is an active process. Eye movements either alternate between fixations and saccades or follow a smooth pursuit movement in case of moving targets. Besides these macroscopic gaze patterns, the eyes perform involuntary micro-movements during fixations which are commonly categorized into micro-saccades, drift and tremor. Eye movements are frequently studied in cognitive psychology, because they reflect a complex interplay of perception, attention and oculomotor control.
A common insight of psychological research is that macro-movements are highly individual. Inspired by this finding, there has been a considerable amount of prior research on oculomotoric biometric identification. However, the accuracy of known approaches is too low and the time needed for identification is too long for any practical application. This thesis explores discriminative models for the task of biometric identification.
Discriminative models optimize a quality measure of the predictions and are usually superior to generative approaches in discriminative tasks. However, using discriminative models requires to select a suitable form of data representation for sequential eye gaze data; i.e., by engineering features or constructing a sequence kernel and the performance of the classification model strongly depends on the data representation. We study two fundamentally different ways of representing eye gaze within a discriminative framework. In the first part of this thesis, we explore the integration of data and psychological background knowledge in the form of generative models to construct representations. To this end, we first develop generative statistical models of gaze behavior during reading and scene viewing that account for viewer-specific distributional properties of gaze patterns. In a second step, we develop a discriminative identification model by deriving Fisher kernel functions from these and several baseline models. We find that an SVM with Fisher kernel is able to reliably identify users based on their eye gaze during reading and scene viewing. However, since the generative models are constrained to use low-frequency macro-movements, they discard a significant amount of information contained in the raw eye tracking signal at a high cost: identification requires about one minute of input recording, which makes it inapplicable for real world biometric systems. In the second part of this thesis, we study a purely data-driven modeling approach. Here, we aim at automatically discovering the individual pattern hidden in the raw eye tracking signal. To this end, we develop a deep convolutional neural network DeepEyedentification that processes yaw and pitch gaze velocities and learns a representation end-to-end. Compared to prior work, this model increases the identification accuracy by one order of magnitude and the time to identification decreases to only seconds. The DeepEyedentificationLive model further improves upon the identification performance by processing binocular input and it also detects presentation-attacks.
We find that by learning a representation, the performance of oculomotoric identification and presentation-attack detection can be driven close to practical relevance for biometric applications. Eye tracking devices with high sampling frequency and precision are expensive and the applicability of eye movement as a biometric feature heavily depends on cost of recording devices.
In the last part of this thesis, we therefore study the requirements on data quality by evaluating the performance of the DeepEyedentificationLive network under reduced spatial and temporal resolution. We find that the method still attains a high identification accuracy at a temporal resolution of only 250 Hz and a precision of 0.03 degrees. Reducing both does not have an additive deteriorating effect.
The constantly growing capacity of reconfigurable devices allows simultaneous execution of complex applications on those devices. The mere diversity of applications deems it impossible to design an interconnection network matching the requirements of every possible application perfectly, leading to suboptimal performance in many cases. However, the architecture of the interconnection network is not the only aspect affecting performance of communication. The resource manager places applications on the device and therefore influences latency between communicating partners and overall network load. Communication protocols affect performance by introducing data and processing overhead putting higher load on the network and increasing resource demand. Approaching communication holistically not only considers the architecture of the interconnect, but communication-aware resource management, communication protocols and resource usage just as well. Incorporation of different parts of a reconfigurable system during design- and runtime and optimizing them with respect to communication demand results in more resource efficient communication. Extensive evaluation shows enhanced performance and flexibility, if communication on reconfigurable devices is regarded in a holistic fashion.
User Experience (UX) describes the holistic experience of a user before, during, and after interaction with a platform, product, or service. UX adds value and attraction to their sole functionality and is therefore highly relevant for firms. The increased interest in UX has produced a vast amount of scholarly research since 1983. The research field is, therefore, complex and scattered. Conducting a bibliometric analysis, we aim at structuring the field quantitatively and rather abstractly. We employed citation analyses, co-citation analyses, and content analyses to evaluate productivity and impact of extant research. We suggest that future research should focus more on business and management related topics.
Im Mittelpunkt dieser Arbeit stehen virtuelle 3D-Stadtmodelle, die Objekte, Phänomene und Prozesse in urbanen Räumen in digitaler Form repräsentieren. Sie haben sich zu einem Kernthema von Geoinformationssystemen entwickelt und bilden einen zentralen Bestandteil geovirtueller 3D-Welten. Virtuelle 3D-Stadtmodelle finden nicht nur Verwendung als Mittel für Experten in Bereichen wie Stadtplanung, Funknetzplanung, oder Lärmanalyse, sondern auch für allgemeine Nutzer, die realitätsnah dargestellte virtuelle Städte in Bereichen wie Bürgerbeteiligung, Tourismus oder Unterhaltung nutzen und z. B. in Anwendungen wie GoogleEarth eine räumliche Umgebung intuitiv erkunden und durch eigene 3D-Modelle oder zusätzliche Informationen erweitern. Die Erzeugung und Darstellung virtueller 3D-Stadtmodelle besteht aus einer Vielzahl von Prozessschritten, von denen in der vorliegenden Arbeit zwei näher betrachtet werden: Texturierung und Visualisierung. Im Bereich der Texturierung werden Konzepte und Verfahren zur automatischen Ableitung von Fototexturen aus georeferenzierten Schrägluftbildern sowie zur Speicherung oberflächengebundener Daten in virtuellen 3D-Stadtmodellen entwickelt. Im Bereich der Visualisierung werden Konzepte und Verfahren für die multiperspektivische Darstellung sowie für die hochqualitative Darstellung nichtlinearer Projektionen virtueller 3D-Stadtmodelle in interaktiven Systemen vorgestellt. Die automatische Ableitung von Fototexturen aus georeferenzierten Schrägluftbildern ermöglicht die Veredelung vorliegender virtueller 3D-Stadtmodelle. Schrägluftbilder bieten sich zur Texturierung an, da sie einen Großteil der Oberflächen einer Stadt, insbesondere Gebäudefassaden, mit hoher Redundanz erfassen. Das Verfahren extrahiert aus dem verfügbaren Bildmaterial alle Ansichten einer Oberfläche und fügt diese pixelpräzise zu einer Textur zusammen. Durch Anwendung auf alle Oberflächen wird das virtuelle 3D-Stadtmodell flächendeckend texturiert. Der beschriebene Ansatz wurde am Beispiel des offiziellen Berliner 3D-Stadtmodells sowie der in GoogleEarth integrierten Innenstadt von München erprobt. Die Speicherung oberflächengebundener Daten, zu denen auch Texturen zählen, wurde im Kontext von CityGML, einem international standardisierten Datenmodell und Austauschformat für virtuelle 3D-Stadtmodelle, untersucht. Es wird ein Datenmodell auf Basis computergrafischer Konzepte entworfen und in den CityGML-Standard integriert. Dieses Datenmodell richtet sich dabei an praktischen Anwendungsfällen aus und lässt sich domänenübergreifend verwenden. Die interaktive multiperspektivische Darstellung virtueller 3D-Stadtmodelle ergänzt die gewohnte perspektivische Darstellung nahtlos um eine zweite Perspektive mit dem Ziel, den Informationsgehalt der Darstellung zu erhöhen. Diese Art der Darstellung ist durch die Panoramakarten von H. C. Berann inspiriert; Hauptproblem ist die Übertragung des multiperspektivischen Prinzips auf ein interaktives System. Die Arbeit stellt eine technische Umsetzung dieser Darstellung für 3D-Grafikhardware vor und demonstriert die Erweiterung von Vogel- und Fußgängerperspektive. Die hochqualitative Darstellung nichtlinearer Projektionen beschreibt deren Umsetzung auf 3D-Grafikhardware, wobei neben der Bildwiederholrate die Bildqualität das wesentliche Entwicklungskriterium ist. Insbesondere erlauben die beiden vorgestellten Verfahren, dynamische Geometrieverfeinerung und stückweise perspektivische Projektionen, die uneingeschränkte Nutzung aller hardwareseitig verfügbaren, qualitätssteigernden Funktionen wie z.~B. Bildraumgradienten oder anisotroper Texturfilterung. Beide Verfahren sind generisch und unterstützen verschiedene Projektionstypen. Sie ermöglichen die anpassungsfreie Verwendung gängiger computergrafischer Effekte wie Stilisierungsverfahren oder prozeduraler Texturen für nichtlineare Projektionen bei optimaler Bildqualität. Die vorliegende Arbeit beschreibt wesentliche Technologien für die Verarbeitung virtueller 3D-Stadtmodelle: Zum einen lassen sich mit den Ergebnissen der Arbeit Texturen für virtuelle 3D-Stadtmodelle automatisiert herstellen und als eigenständige Attribute in das virtuelle 3D-Stadtmodell einfügen. Somit trägt diese Arbeit dazu bei, die Herstellung und Fortführung texturierter virtueller 3D-Stadtmodelle zu verbessern. Zum anderen zeigt die Arbeit Varianten und technische Lösungen für neuartige Projektionstypen für virtueller 3D-Stadtmodelle in interaktiven Visualisierungen. Solche nichtlinearen Projektionen stellen Schlüsselbausteine dar, um neuartige Benutzungsschnittstellen für und Interaktionsformen mit virtuellen 3D-Stadtmodellen zu ermöglichen, insbesondere für mobile Geräte und immersive Umgebungen.
In this project I constructed a workflow that takes a DNA sequence as input and provides a phylogenetic tree, consisting of the input sequence and other sequences which were found during a database search. In this phylogenetic tree the sequences are arranged depending on similarities. In bioinformatics, constructing phylogenetic trees is often used to explore the evolutionary relationships of genes or organisms and to understand the mechanisms of evolution itself.
Boolean constraint solving technology has made tremendous progress over the last decade, leading to industrial-strength solvers, for example, in the areas of answer set programming (ASP), the constraint satisfaction problem (CSP), propositional satisfiability (SAT) and satisfiability of quantified Boolean formulas (QBF). However, in all these areas, there exist multiple solving strategies that work well on different applications; no strategy dominates all other strategies. Therefore, no individual solver shows robust state-of-the-art performance in all kinds of applications. Additionally, the question arises how to choose a well-performing solving strategy for a given application; this is a challenging question even for solver and domain experts. One way to address this issue is the use of portfolio solvers, that is, a set of different solvers or solver configurations. We present three new automatic portfolio methods: (i) automatic construction of parallel portfolio solvers (ACPP) via algorithm configuration,(ii) solving the $NP$-hard problem of finding effective algorithm schedules with Answer Set Programming (aspeed), and (iii) a flexible algorithm selection framework (claspfolio2) allowing for fair comparison of different selection approaches. All three methods show improved performance and robustness in comparison to individual solvers on heterogeneous instance sets from many different applications. Since parallel solvers are important to effectively solve hard problems on parallel computation systems (e.g., multi-core processors), we extend all three approaches to be effectively applicable in parallel settings. We conducted extensive experimental studies different instance sets from ASP, CSP, MAXSAT, Operation Research (OR), SAT and QBF that indicate an improvement in the state-of-the-art solving heterogeneous instance sets. Last but not least, from our experimental studies, we deduce practical advice regarding the question when to apply which of our methods.
Although educational content in electronic form is increasing dramatically, its usage in an educational environment is poor, mainly due to the fact that there is too much of (unreliable) redundant, and not relevant information. Finding appropriate answers is a rather difficult task being reliant on the user filtering of the pertinent information from the noise. Turning knowledge bases like the online tele-TASK archive into useful educational resources requires identifying correct, reliable, and "machine-understandable" information, as well as developing simple but efficient search tools with the ability to reason over this information. Our vision is to create an E-Librarian Service, which is able to retrieve multimedia resources from a knowledge base in a more efficient way than by browsing through an index, or by using a simple keyword search. In our E-Librarian Service, the user can enter his question in a very simple and human way; in natural language (NL). Our premise is that more pertinent results would be retrieved if the search engine understood the sense of the user's query. The returned results are then logical consequences of an inference rather than of keyword matchings. Our E-Librarian Service does not return the answer to the user's question, but it retrieves the most pertinent document(s), in which the user finds the answer to his/her question. Among all the documents that have some common information with the user query, our E-Librarian Service identifies the most pertinent match(es), keeping in mind that the user expects an exhaustive answer while preferring a concise answer with only little or no information overhead. Also, our E-Librarian Service always proposes a solution to the user, even if the system concludes that there is no exhaustive answer. Our E-Librarian Service was implemented prototypically in three different educational tools. A first prototype is CHESt (Computer History Expert System); it has a knowledge base with 300 multimedia clips that cover the main events in computer history. A second prototype is MatES (Mathematics Expert System); it has a knowledge base with 115 clips that cover the topic of fractions in mathematics for secondary school w.r.t. the official school programme. All clips were recorded mainly by pupils. The third and most advanced prototype is the "Lecture Butler's E-Librarain Service"; it has a Web service interface to respect a service oriented architecture (SOA), and was developed in the context of the Web-University project at the Hasso-Plattner-Institute (HPI). Two major experiments in an educational environment - at the Lycée Technique Esch/Alzette in Luxembourg - were made to test the pertinence and reliability of our E-Librarian Service as a complement to traditional courses. The first experiment (in 2005) was made with CHESt in different classes, and covered a single lesson. The second experiment (in 2006) covered a period of 6 weeks of intensive use of MatES in one class. There was no classical mathematics lesson where the teacher gave explanations, but the students had to learn in an autonomous and exploratory way. They had to ask questions to the E-Librarian Service just the way they would if there was a human teacher.
In recent years, there has been a dramatic increase in available compute capacities. However, these “Grid resources” are rarely accessible in a continuous stream, but rather appear scattered across various machine types, platforms and operating systems, which are coupled by networks of fluctuating bandwidth. It becomes increasingly difficult for scientists to exploit available resources for their applications. We believe that intelligent, self-governing applications should be able to select resources in a dynamic and heterogeneous environment: Migrating applications determine a resource when old capacities are used up. Spawning simulations launch algorithms on external machines to speed up the main execution. Applications are restarted as soon as a failure is detected. All these actions can be taken without human interaction. A distributed compute environment possesses an intrinsic unreliability. Any application that interacts with such an environment must be able to cope with its failing components: deteriorating networks, crashing machines, failing software. We construct a reliable service infrastructure by endowing a service environment with a peer-to-peer topology. This “Grid Peer Services” infrastructure accommodates high-level services like migration and spawning, as well as fundamental services for application launching, file transfer and resource selection. It utilizes existing Grid technology wherever possible to accomplish its tasks. An Application Information Server acts as a generic information registry to all participants in a service environment. The service environment that we developed, allows applications e.g. to send a relocation requests to a migration server. The server selects a new computer based on the transmitted resource requirements. It transfers the application's checkpoint and binary to the new host and resumes the simulation. Although the Grid's underlying resource substrate is not continuous, we achieve persistent computations on Grids by relocating the application. We show with our real-world examples that a traditional genome analysis program can be easily modified to perform self-determined migrations in this service environment.
Lessons Learned
(2014)
This chapter summarizes the experience and the lessons we learned concerning the application of the jABC as a framework for design and execution of scientific workflows. It reports experiences from the domain modeling (especially service integration) and workflow design phases and evaluates the resulting models statistically with respect to the SIB library and hierarchy levels.
The Course's SIB Libraries
(2014)
This chapter gives a detailed description of the service framework underlying all the example projects that form the foundation of this book. It describes the different SIB libraries that we made available for the course “Process modeling in the natural sciences” to provide the functionality that was required for the envisaged applications. The students used these SIB libraries to realize their projects.
Background: The development of bioinformatics databases, algorithms, and tools throughout the last years has lead to a highly distributedworld of bioinformatics services. Without adequatemanagement and development support, in silico researchers are hardly able to exploit the potential of building complex, specialized analysis processes from these services. The Semantic Web aims at thoroughly equipping individual data and services with machine-processable meta-information, while workflow systems support the construction of service compositions. However, even in this combination, in silico researchers currently would have to deal manually with the service interfaces, the adequacy of the semantic annotations, type incompatibilities, and the consistency of service compositions. Results: In this paper, we demonstrate by means of two examples how Semantic Web technology together with an adequate domain modelling frees in silico researchers from dealing with interfaces, types, and inconsistencies. In Bio-jETI, bioinformatics services can be graphically combined to complex services without worrying about details of their interfaces or about type mismatches of the composition. These issues are taken care of at the semantic level by Bio-jETI’s model checking and synthesis features. Whenever possible, they automatically resolve type mismatches in the considered service setting. Otherwise, they graphically indicate impossible/incorrect service combinations. In the latter case, the workflow developermay either modify his service composition using semantically similar services, or ask for help in developing the missing mediator that correctly bridges the detected type gap. Newly developed mediators should then be adequately annotated semantically, and added to the service library for later reuse in similar situations. Conclusion: We show the power of semantic annotations in an adequately modelled and semantically enabled domain setting. Using model checking and synthesis methods, users may orchestrate complex processes from a wealth of heterogeneous services without worrying about interfaces and (type) consistency. The success of this method strongly depends on a careful semantic annotation of the provided services and on its consequent exploitation for analysis, validation, and synthesis. We are convinced that these annotations will become standard, as they will become preconditions for the success and widespread use of (preferred) services in the Semantic Web
We summarize here the main characteristics and features of the jABC framework, used in the case studies as a graphical tool for modeling scientific processes and workflows. As a comprehensive environment for service-oriented modeling and design according to the XMDD (eXtreme Model-Driven Design) paradigm, the jABC offers much more than the pure modeling capability. Associated technologies and plugins provide in fact means for a rich variety of supporting functionality, such as remote service integration, taxonomical service classification, model execution, model verification, model synthesis, and model compilation. We describe here in short both the essential jABC features and the service integration philosophy followed in the environment. In our work over the last years we have seen that this kind of service definition and provisioning platform has the potential to become a core technology in interdisciplinary service orchestration and technology transfer: Domain experts, like scientists not specially trained in computer science, directly define complex service orchestrations as process models and use efficient and complex domain-specific tools in a simple and intuitive way.
A major part of the scientific experiments that are carried out today requires thorough computational support. While database and algorithm providers face the problem of bundling resources to create and sustain powerful computation nodes, the users have to deal with combining sets of (remote) services into specific data analysis and transformation processes. Today’s attention to “big data” amplifies the issues of size, heterogeneity, and process-level diversity/integration. In the last decade, especially workflow-based approaches to deal with these processes have enjoyed great popularity. This book concerns a particularly agile and model-driven approach to manage scientific workflows that is based on the XMDD paradigm. In this chapter we explain the scope and purpose of the book, briefly describe the concepts and technologies of the XMDD paradigm, explain the principal differences to related approaches, and outline the structure of the book.
Solving problems combining task and motion planning requires searching across a symbolic search space and a geometric search space. Because of the semantic gap between symbolic and geometric representations, symbolic sequences of actions are not guaranteed to be geometrically feasible. This compels us to search in the combined search space, in which frequent backtracks between symbolic and geometric levels make the search inefficient.We address this problem by guiding symbolic search with rich information extracted from the geometric level through culprit detection mechanisms.
E-Learning-Anwendungen bieten Chancen für die gesetzlich vorgeschriebene Inklusion von Lernenden mit Beeinträchtigungen. Die gleichberechtigte Teilhabe von blinden Lernenden an Veranstaltungen in virtuellen Klassenzimmern ist jedoch durch den synchronen, multimedialen Charakter und den hohen Informationsumfang dieser Lösungen kaum möglich.
Die vorliegende Arbeit untersucht die Zugänglichkeit virtueller Klassenzimmer für blinde Nutzende, um eine möglichst gleichberechtigte Teilhabe an synchronen, kollaborativen Lernszenarien zu ermöglichen. Im Rahmen einer Produktanalyse werden dazu virtuelle Klassenzimmer auf ihre Zugänglichkeit und bestehende Barrieren untersucht und Richtlinien für die zugängliche Gestaltung von virtuellen Klassenzimmern definiert. Anschließend wird ein alternatives Benutzungskonzept zur Darstellung und Bedienung virtueller Klassenzimmer auf einem zweidimensionalen taktilen Braille-Display entwickelt, um eine möglichst gleichberechtigte Teilhabe blinder Lernender an synchronen Lehrveranstaltungen zu ermöglichen. Nach einer ersten Evaluation mit blinden Probanden erfolgt die prototypische Umsetzung des Benutzungskonzepts für ein Open-Source-Klassenzimmer. Die abschließende Evaluation der prototypischen Umsetzung zeigt die Verbesserung der Zugänglichkeit von virtuellen Klassenzimmern für blinde Lernende unter Verwendung eines taktilen Flächendisplays und bestätigt die Wirksamkeit der im Rahmen dieser Arbeit entwickelten Konzepte.
In the early days of computer graphics, research was mainly driven by the goal to create realistic synthetic imagery. By contrast, non-photorealistic computer graphics, established as its own branch of computer graphics in the early 1990s, is mainly motivated by concepts and principles found in traditional art forms, such as painting, illustration, and graphic design, and it investigates concepts and techniques that abstract from reality using expressive, stylized, or illustrative rendering techniques. This thesis focuses on the artistic stylization of two-dimensional content and presents several novel automatic techniques for the creation of simplified stylistic illustrations from color images, video, and 3D renderings. Primary innovation of these novel techniques is that they utilize the smooth structure tensor as a simple and efficient way to obtain information about the local structure of an image. More specifically, this thesis contributes to knowledge in this field in the following ways. First, a comprehensive review of the structure tensor is provided. In particular, different methods for integrating the minor eigenvector field of the smoothed structure tensor are developed, and the superiority of the smoothed structure tensor over the popular edge tangent flow is demonstrated. Second, separable implementations of the popular bilateral and difference of Gaussians filters that adapt to the local structure are presented. These filters avoid artifacts while being computationally highly efficient. Taken together, both provide an effective way to create a cartoon-style effect. Third, a generalization of the Kuwahara filter is presented that avoids artifacts by adapting the shape, scale, and orientation of the filter to the local structure. This causes directional image features to be better preserved and emphasized, resulting in overall sharper edges and a more feature-abiding painterly effect. In addition to the single-scale variant, a multi-scale variant is presented, which is capable of performing a highly aggressive abstraction. Fourth, a technique that builds upon the idea of combining flow-guided smoothing with shock filtering is presented, allowing for an aggressive exaggeration and an emphasis of directional image features. All presented techniques are suitable for temporally coherent per-frame filtering of video or dynamic 3D renderings, without requiring expensive extra processing, such as optical flow. Moreover, they can be efficiently implemented to process content in real-time on a GPU.
A workflow for visualizing server connections using the Google Maps API was built in the jABC. It makes use of three basic services: An XML-based IP address geolocation web service, a command line tool and the Static Maps API. The result of the workflow is an URL leading to an image file of a map, showing server connections between a client and a target host.
Die regelmäßige Navigation durch den Raum gehört für Studenten der Universität Potsdam zum Alltag. Man möchte, unabhängig vom Fortbewegungsmittel, schnell und sicher von zu Hause zum Hörsaal oder Seminargebäude. Eine umfassende Navigationshilfe, die alle Transportmodi verbindet, wird dafür verlangt.
Das Ziel dieser Arbeit besteht darin, ein Konzept für einen multimodalen Routenplaner zu entwickeln, der es Studenten und Gästen der Universität Potsdam ermöglicht, sich zwischen den dezentral gelegenen Campusstandorten zu bewegen – egal ob mit Bus und Bahn, dem Auto, Fahrrad oder zu Fuß. Die Implementierung erfolgt ausschließlich auf Grundlage freier Daten und freier, quelloffener Software (FOSS), die für diesen Zweck aufbereitet werden. Ergebnis ist eine webbasierte Applikation, die über eine Entwicklerschnittstelle (API) in andere Projekte eingebunden werden kann.
Aus einer Vergleichsstudie mit starken und schwachen Problemlösern konnten Erkenntnisse über die effizienten Herangehensweisen von Hochleistern an Informatikprobleme gewonnen werden. Diese Erkenntnisse wurden in einem Lehrvideo zum informatischen Problemlösen didaktisch aufgearbeitet, sodass Lernenden der Einsatz von Baumstrukturen und Rekursion im konkreten Kontext gezeigt werden kann. Nun wurde die tatsächliche Lernwirksamkeit des Videos sowie die Definition der Zielgruppe in einer Vergleichsstudie mit 66 Studienanfängern überprüft.
Dieses Lehrvideo zeigt aus der Perspektive einer Übertischkamera den fiktiven informatischen Hochleister Tom bei der Bearbeitung eines schwierigen Färbeproblems. Dabei kann man die fortlaufend von ihm angefertigten Skizzen beobachten und seine Gedankengänge genau verfolgen. Denn dieser Problemlöser arbeitet unter lautem Denken, d. h. er spricht alle seine Gedankengänge laut aus. Man kann zuschauen, wie Tom zunächst die Aufgabe analysiert und die dadurch gewonnenen Erkenntnisse in der anschließenden Problembearbeitung gewinnbringend einsetzt. Der Zuschauer wird dabei aber nicht allein gelassen. An markanten Stellen wird das Video unterbrochen und Toms zurückliegende Aktivitäten mit animierten Bildsequenzen vertiefend erläutert. Schwache Problemlöser können so die in Unterricht oder Vorlesung vermittelten Kenntnisse über informatische Problemlösemethoden vertiefen und deren Anwendung durch einen starken Problemlöser beispielhaft miterleben. Entstanden ist dieses Video aus einer Vergleichsstudie mit starken und schwachen Problemlösern. Die effizienten Methoden der Hochleister wurden didaktisch aufgearbeitet und zu einem modellhaften Problemlöseprozess zusammengesetzt. Der wissenschaftliche Hintergrund des Lehrvideos wird durch eine als Bildergeschichte erzählte Rahmenhandlung verdeutlicht. Bei Erstsemesterstudenten der Informatik, denen dieses Video zur Bewertung vorgespielt wurde, fand dieses Konzept große Zustimmung. Tenor: Unterhaltsam und lehrreich zugleich.
Image feature detection is a key task in computer vision. Scale Invariant Feature Transform (SIFT) is a prevalent and well known algorithm for robust feature detection. However, it is computationally demanding and software implementations are not applicable for real-time performance. In this paper, a versatile and pipelined hardware implementation is proposed, that is capable of computing keypoints and rotation invariant descriptors on-chip. All computations are performed in single precision floating-point format which makes it possible to implement the original algorithm with little alteration. Various rotation resolutions and filter kernel sizes are supported for images of any resolution up to ultra-high definition. For full high definition images, 84 fps can be processed. Ultra high definition images can be processed at 21 fps.
Answer Set Programming (ASP) emerged in the late 1990s as a new logic programming paradigm, having its roots in nonmonotonic reasoning, deductive databases, and logic programming with negation as failure. The basic idea of ASP is to represent a computational problem as a logic program whose answer sets correspond to solutions, and then to use an answer set solver for finding answer sets of the program. ASP is particularly suited for solving NP-complete search problems. Among these, we find applications to product configuration, diagnosis, and graph-theoretical problems, e.g. finding Hamiltonian cycles. On different lines of ASP research, many extensions of the basic formalism have been proposed. The most intensively studied one is the modelling of preferences in ASP. They constitute a natural and effective way of selecting preferred solutions among a plethora of solutions for a problem. For example, preferences have been successfully used for timetabling, auctioning, and product configuration. In this thesis, we concentrate on preferences within answer set programming. Among several formalisms and semantics for preference handling in ASP, we concentrate on ordered logic programs with the underlying D-, W-, and B-semantics. In this setting, preferences are defined among rules of a logic program. They select preferred answer sets among (standard) answer sets of the underlying logic program. Up to now, those preferred answer sets have been computed either via a compilation method or by meta-interpretation. Hence, the question comes up, whether and how preferences can be integrated into an existing ASP solver. To solve this question, we develop an operational graph-based framework for the computation of answer sets of logic programs. Then, we integrate preferences into this operational approach. We empirically observe that our integrative approach performs in most cases better than the compilation method or meta-interpretation. Another research issue in ASP are optimization methods that remove redundancies, as also found in database query optimizers. For these purposes, the rather recently suggested notion of strong equivalence for ASP can be used. If a program is strongly equivalent to a subprogram of itself, then one can always use the subprogram instead of the original program, a technique which serves as an effective optimization method. Up to now, strong equivalence has not been considered for logic programs with preferences. In this thesis, we tackle this issue and generalize the notion of strong equivalence to ordered logic programs. We give necessary and sufficient conditions for the strong equivalence of two ordered logic programs. Furthermore, we provide program transformations for ordered logic programs and show in how far preferences can be simplified. Finally, we present two new applications for preferences within answer set programming. First, we define new procedures for group decision making, which we apply to the problem of scheduling a group meeting. As a second new application, we reconstruct a linguistic problem appearing in German dialects within ASP. Regarding linguistic studies, there is an ongoing debate about how unique the rule systems of language are in human cognition. The reconstruction of grammatical regularities with tools from computer science has consequences for this debate: if grammars can be modelled this way, then they share core properties with other non-linguistic rule systems.
Interaktive System sind dynamische Systeme mit einem zumeist informationellen Kern, die über eine Benutzungsschnittstelle von einem oder mehreren Benutzern bedient werden können. Grundlage für die Benutzung interaktiver Systeme ist das Verständnis von Zweck und Funktionsweise. Allein aus Form und Gestalt der Benutzungsschnittstelle ergibt sich ein solches Verständnis nur in einfachen Fällen. Mit steigender Komplexität ist daher eine verständliche Beschreibung solcher Systeme für deren Entwicklung und Benutzung unverzichtbar. Abhängig von ihrem Zweck variieren die Formen vorgefundener Beschreibungen in der Literatur sehr stark. Ausschlaggebend für die Verständlichkeit einer Beschreibung ist jedoch primär die ihr zugrundeliegende Begriffswelt. Zur Beschreibung allgemeiner komplexer diskreter Systeme - aufbauend auf einer getrennten Betrachtung von Aufbau-, Ablauf- und Wertestrukturen - existiert eine bewährte Begriffswelt. Eine Spezialisierung dieser Begriffs- und Vorstellungswelt, die den unterschiedlichen Betrachtungsebenen interaktiver Systeme gerecht wird und die als Grundlage beliebiger Beschreibungsansätze interaktiver Systeme dienen kann, gibt es bisher nicht. Ziel dieser Arbeit ist die Bereitstellung einer solchen Begriffswelt zur effizienten Kommunikation der Strukturen interaktiver Systeme. Dadurch soll die Grundlage für eine sinnvolle Ergänzung bestehender Beschreibungs- und Entwicklungsansätze geschaffen werden. Prinzipien der Gestaltung von Benutzungsschnittstellen, Usability- oder Ergonomiebetrachtungen stehen nicht im Mittelpunkt der Arbeit. Ausgehend von der informationellen Komponente einer Benutzungsschnittstelle werden drei Modellebenen abgegrenzt, die bei der Betrachtung eines interaktiven Systems zu unterscheiden sind. Jede Modellebene ist durch eine typische Begriffswelt gekennzeichnet, die ihren Ursprung in einer aufbauverwurzelten Vorstellung hat. Der durchgängige Bezug auf eine Systemvorstellung unterscheidet diesen Ansatz von dem bereits bekannten Konzept der Abgrenzung unterschiedlicher Ebenen verschiedenartiger Entwurfsentscheidungen. Die Fundamental Modeling Concepts (FMC) bilden dabei die Grundlage für die Findung und die Darstellung von Systemstrukturen. Anhand bestehender Systembeschreibungen wird gezeigt, wie die vorgestellte Begriffswelt zur Modellfindung genutzt werden kann. Dazu wird eine repräsentative Auswahl vorgefundener Systembeschreibungen aus der einschlägigen Literatur daraufhin untersucht, in welchem Umfang durch sie die Vorstellungswelt dynamischer Systeme zum Ausdruck kommt. Defizite in der ursprünglichen Darstellung werden identifiziert. Anhand von Alternativmodellen zu den betrachteten Systemen wird der Nutzen der vorgestellten Begriffswelt und Darstellungsweise demonstriert.
The modeling and evaluation calculus FMC-QE, the Fundamental Modeling Concepts for Quanti-tative Evaluation [1], extends the Fundamental Modeling Concepts (FMC) for performance modeling and prediction. In this new methodology, the hierarchical service requests are in the main focus, because they are the origin of every service provisioning process. Similar to physics, these service requests are a tuple of value and unit, which enables hierarchical service request transformations at the hierarchical borders and therefore the hierarchical modeling. Through reducing the model complexity of the models by decomposing the system in different hierarchical views, the distinction between operational and control states and the calculation of the performance values on the assumption of the steady state, FMC-QE has a scalable applica-bility on complex systems. According to FMC, the system is modeled in a 3-dimensional hierarchical representation space, where system performance parameters are described in three arbitrarily fine-grained hierarchi-cal bipartite diagrams. The hierarchical service request structures are modeled in Entity Relationship Diagrams. The static server structures, divided into logical and real servers, are de-scribed as Block Diagrams. The dynamic behavior and the control structures are specified as Petri Nets, more precisely Colored Time Augmented Petri Nets. From the structures and pa-rameters of the performance model, a hierarchical set of equations is derived. The calculation of the performance values is done on the assumption of stationary processes and is based on fundamental laws of the performance analysis: Little's Law and the Forced Traffic Flow Law. Little's Law is used within the different hierarchical levels (horizontal) and the Forced Traffic Flow Law is the key to the dependencies among the hierarchical levels (vertical). This calculation is suitable for complex models and allows a fast (re-)calculation of different performance scenarios in order to support development and configuration decisions. Within the Research Group Zorn at the Hasso Plattner Institute, the work is embedded in a broader research in the development of FMC-QE. While this work is concentrated on the theoretical background, description and definition of the methodology as well as the extension and validation of the applicability, other topics are in the development of an FMC-QE modeling and evaluation tool and the usage of FMC-QE in the design of an adaptive transport layer in order to fulfill Quality of Service and Service Level Agreements in volatile service based environments. This thesis contains a state-of-the-art, the description of FMC-QE as well as extensions of FMC-QE in representative general models and case studies. In the state-of-the-art part of the thesis in chapter 2, an overview on existing Queueing Theory and Time Augmented Petri Net models and other quantitative modeling and evaluation languages and methodologies is given. Also other hierarchical quantitative modeling frameworks will be considered. The description of FMC-QE in chapter 3 consists of a summary of the foundations of FMC-QE, basic definitions, the graphical notations, the FMC-QE Calculus and the modeling of open queueing networks as an introductory example. The extensions of FMC-QE in chapter 4 consist of the integration of the summation method in order to support the handling of closed networks and the modeling of multiclass and semaphore scenarios. Furthermore, FMC-QE is compared to other performance modeling and evaluation approaches. In the case study part in chapter 5, proof-of-concept examples, like the modeling of a service based search portal, a service based SAP NetWeaver application and the Axis2 Web service framework will be provided. Finally, conclusions are given by a summary of contributions and an outlook on future work in chapter 6. [1] Werner Zorn. FMC-QE - A New Approach in Quantitative Modeling. In Hamid R. Arabnia, editor, Procee-dings of the International Conference on Modeling, Simulation and Visualization Methods (MSV 2007) within WorldComp ’07, pages 280 – 287, Las Vegas, NV, USA, June 2007. CSREA Press. ISBN 1-60132-029-9.
Thema dieser Arbeit sind echtzeitfähige 3D-Renderingverfahren, die 3D-Geometrie mit über der Standarddarstellung hinausgehenden Qualitäts- und Gestaltungsmerkmalen rendern können. Beispiele sind Verfahren zur Darstellung von Schatten, Reflexionen oder Transparenz. Mit heutigen computergraphischen Software-Basissystemen ist ihre Integration in 3D-Anwendungssysteme sehr aufwändig: Dies liegt einerseits an der technischen, algorithmischen Komplexität der Einzelverfahren, andererseits an Ressourcenkonflikten und Seiteneffekten bei der Kombination mehrerer Verfahren. Szenengraphsysteme, intendiert als computergraphische Softwareschicht zur Abstraktion von der Graphikhardware, stellen derzeit keine Mechanismen zur Nutzung dieser Renderingverfahren zur Verfügung. Ziel dieser Arbeit ist es, eine Software-Architektur für ein Szenengraphsystem zu konzipieren und umzusetzen, die echtzeitfähige 3D-Renderingverfahren als Komponenten modelliert und es damit erlaubt, diese Verfahren innerhalb des Szenengraphsystems für die Anwendungsentwicklung effektiv zu nutzen. Ein Entwickler, der ein solches Szenengraphsystem nutzt, steuert diese Komponenten durch Elemente in der Szenenbeschreibung an, die die sichtbare Wirkung eines Renderingverfahrens auf die Geometrie in der Szene angeben, aber keine Hinweise auf die algorithmische Implementierung des Verfahrens enthalten. Damit werden Renderingverfahren in 3D-Anwendungssystemen nutzbar, ohne dass ein Entwickler detaillierte Kenntnisse über sie benötigt, so dass der Aufwand für ihre Entwicklung drastisch reduziert wird. Ein besonderer Augenmerk der Arbeit liegt darauf, auf diese Weise auch verschiedene Renderingverfahren in einer Szene kombiniert einsetzen zu können. Hierzu ist eine Unterteilung der Renderingverfahren in mehrere Kategorien erforderlich, die mit Hilfe unterschiedlicher Ansätze ausgewertet werden. Dies erlaubt die Abstimmung verschiedener Komponenten für Renderingverfahren und ihrer verwendeten Ressourcen. Die Zusammenarbeit mehrerer Renderingverfahren hat dort ihre Grenzen, wo die Kombination von Renderingverfahren graphisch nicht sinnvoll ist oder fundamentale technische Beschränkungen der Verfahren eine gleichzeitige Verwendung unmöglich machen. Die in dieser Arbeit vorgestellte Software-Architektur kann diese Grenzen nicht verschieben, aber sie ermöglicht den gleichzeitigen Einsatz vieler Verfahren, bei denen eine Kombination aufgrund der hohen Komplexität der Implementierung bislang nicht erreicht wurde. Das Vermögen zur Zusammenarbeit ist dabei allerdings von der Art eines Einzelverfahrens abhängig: Verfahren zur Darstellung transparenter Geometrie beispielsweise erfordern bei der Kombination mit anderen Verfahren in der Regel vollständig neuentwickelte Renderingverfahren; entsprechende Komponenten für das Szenengraphsystem können daher nur eingeschränkt mit Komponenten für andere Renderingverfahren verwendet werden. Das in dieser Arbeit entwickelte System integriert und kombiniert Verfahren zur Darstellung von Bumpmapping, verschiedene Schatten- und Reflexionsverfahren sowie bildbasiertes CSG-Rendering. Damit stehen wesentliche Renderingverfahren in einem Szenengraphsystem erstmalig komponentenbasiert und auf einem hohen Abstraktionsniveau zur Verfügung. Das System ist trotz des zusätzlichen Verwaltungsaufwandes in der Lage, die Renderingverfahren einzeln und in Kombination grundsätzlich in Echtzeit auszuführen.
Aktuelle Softwaresysteme erlauben die verteilte Authentifizierung von Benutzern über Ver-zeichnisdienste, die sowohl im Intranet als auch im Extranet liegen und die über Domänen-grenzen hinweg die Kooperation mit Partnern ermöglichen. Der nächste Schritt ist es nun, die Autorisierung ebenfalls aus der lokalen Anwendung auszulagern und diese extern durchzu-führen – vorzugsweise unter dem Einfluss der Authentifizierungspartner. Basierend auf der Analyse des State-of-the-Art wird in dieser Arbeit ein Framework vorges-tellt, das die verteilte Autorisierung von ADFS (Active Directory Federation Services) authenti-fizierten Benutzern auf Basis ihrer Gruppen oder ihrer persönlichen Identität ermöglicht. Es wird eine prototypische Implementation mit Diensten entwickelt, die für authentifizierte Be-nutzer Autorisierungsanfragen extern delegieren, sowie ein Dienst, der diese Autorisierungs-anfragen verarbeitet. Zusätzlich zeigt die Arbeit eine Integration dieses Autorisierungs-Frameworks in das .NET Framework, um die praxistaugliche Verwendbarkeit in einer aktuel-len Entwicklungsumgebung zu demonstrieren. Abschließend wird ein Ausblick auf weitere Fragestellungen und Folgearbeiten gegeben.
Thema des Workshops waren alle Fragen, die sich der Vermittlung von Informatikgegenständen im Hochschulbereich widmen. Dazu gehören u.a.: - fachdidaktische Konzepte der Vermittlung einzelner Informatikgegenstände - methodische Lösungen, wie spezielle Lehr- und Lernformen, Durchführungskonzepte - Studienkonzepte und Curricula, insbesondere im Zusammenhang mit Bachelor- und Masterstudiengängen - E-Learning-Ansätze, wenn sie ein erkennbares didaktisches Konzept verfolgen empirische Ergebnisse und Vergleichsstudien. Die Fachtagung widmete sich ausgewählten Fragestellungen dieses Themenkomplexes, die durch Vorträge ausgewiesener Experten, durch eingereichte Beiträge und durch eine Präsentation intensiv behandelt wurden.
E-Learning Symposium 2018
(2018)
In den vergangenen Jahren sind viele E-Learning-Innovationen entstanden. Einige davon wurden auf den vergangenen E-Learning Symposien der Universität Potsdam präsentiert: Das erste E-Learning Symposium im Jahr 2012 konzentrierte sich auf unterschiedliche Möglichkeiten der Studierendenaktivierung und Lehrgestaltung. Das Symposium 2014 rückte vor allem die Studierenden ins Zentrum der Aufmerksamkeit. Im Jahr 2016 kam es durch das Zusammengehen des Symposiums mit der DeLFI-Tagung zu einer Fokussierung auf technische Innovationen. Doch was ist aus den Leuchttürmen von gestern geworden, und brauchen wir überhaupt noch neue Leuchttürme? Das Symposium setzt sich in diesem Jahr unter dem Motto „Innovation und Nachhaltigkeit – (k)ein Gegensatz?“ mit mediengestützten Lehr- und Lernprozessen im universitären Kontext auseinander und reflektiert aktuelle technische sowie didaktische Entwicklungen mit Blick auf deren mittel- bis langfristigen Einsatz in der Praxis.
Dieser Tagungsband zum E-Learning Symposium 2018 an der Universität Potsdam beinhaltet eine Mischung von Forschungs- und Praxisbeiträgen aus verschiedenen Fachdisziplinen und eröffnet vielschichtige Perspektiven auf das Thema E-Learning. Dabei werden die Vielfalt der didaktischen Einsatzszenarien als auch die Potentiale von Werk-zeugen und Methoden der Informatik in ihrem Zusammenspiel beleuchtet.
In seiner Keynote widmet sich Reinhard Keil dem Motto des Symposiums und geht der Nachhaltigkeit bei E-Learning-Projekten auf den Grund. Dabei analysiert und beleuchtet er anhand seiner über 15-jährigen Forschungspraxis die wichtigsten Wirkfaktoren und formuliert Empfehlungen zur Konzeption von E-Learning-Projekten. Im Gegensatz zu rein auf Kostenersparnis ausgerichteten (hochschul-)politischen Forderungen proklamiert er den Ansatz der hypothesengeleiteten Technikgestaltung, in der Nachhaltigkeit als Leitfrage oder Forschungsstrategie verstanden werden kann. In eine ähnliche Richtung geht der Beitrag von Iris Braun et al., die über Erfolgsfaktoren beim Einsatz von Audience Response Systemen in der universitären Lehre berichten.
Ein weiteres aktuelles Thema, sowohl für die Bildungstechnologie als auch in den Bildungswissenschaften allgemein, ist die Kompetenzorientierung und –modellierung. Hier geht es darum (Problemlöse-)Fähigkeiten gezielt zu beschreiben und in den Mittelpunkt der Lehre zu stellen. Johannes Konert stellt in einem eingeladenen Vortrag zwei Projekte vor, die den Prozess beginnend bei der Definition von Kompetenzen, deren Modellierung in einem semantischen maschinenlesbaren Format bis hin zur Erarbeitung von Methoden zur Kompetenzmessung und der elektronischen Zertifizierung aufzeigen. Dabei geht er auf technische Möglichkeiten, aber auch Grenzen ein. Auf einer spezifischeren Ebene beschäftigt sich Sarah Stumpf mit digitalen bzw. mediendidaktischen Kompetenzen im Lehramtsstudium und stellt ein Framework für die Förderung ebensolcher Kompetenzen bei angehenden Lehrkräften vor.
Der Einsatz von E-Learning birgt noch einige Herausforderungen. Dabei geht es oft um die Verbindung von Didaktik und Technik, den Erhalt von Aufmerksamkeit oder den Aufwand für das Erstellen von interaktiven Lehr- und Lerninhalten. Drei Beiträge in diesem Tagungsband beschäftigen sich mit dieser Thematik in unterschiedlichen Kontexten und zeigen Best-Practices und Lösungsansätze auf: Der Beitrag von Martina Wahl und Michael Hölscher behandelt den besonderen Kontext von Blended Learning-Szenarien in berufsbegleitenden Studiengängen. Um die Veröffentlichung eines global frei verfügbaren Onlinekurses abseits der großen MOOC Plattformen und den didaktischen Herausforderungen auch hinsichtlich der Motivation geht es im Beitrag von Ennio Marani und Isabel Jaisli. Schließlich schlagen Gregor Damnik et al. die automatische Erzeugung von Aufgaben zur Erhöhung von Interaktivität und Adaptivität in digitalen Lernressourcen vor, um den teilweise erheblichen Erstellungsaufwand zu reduzieren.
Zum Thema E-Learning zählen auch immer mobile Apps bzw. Spiele. Gleich zwei Beiträge beschäftigen sich mit dem Einsatz von E-Learning-Tools im Gesundheitskontext: Anna Tscherejkina und Anna Morgiel stellen in ihrem Beitrag Minispiele zum Training von sozio-emotionalen Kompetenzen für Menschen mit Autismus vor, und Stephanie Herbstreit et al. berichten vom Einsatz einer mobilen Lern-App zur Verbesserung von klinisch-praktischem Unterricht.
The innovation of information techniques has changed many aspects of our life. In health care field, we can obtain, manage and communicate high-quality large volumetric image data by computer integrated devices, to support medical care. In this dissertation I propose several promising methods that could assist physicians in processing, observing and communicating the image data. They are included in my three research aspects: telemedicine integration, medical image visualization and image segmentation. And these methods are also demonstrated by the demo software that I developed. One of my research point focuses on medical information storage standard in telemedicine, for example DICOM, which is the predominant standard for the storage and communication of medical images. I propose a novel 3D image data storage method, which was lacking in current DICOM standard. I also created a mechanism to make use of the non-standard or private DICOM files. In this thesis I present several rendering techniques on medical image visualization to offer different display manners, both 2D and 3D, for example, cut through data volume in arbitrary degree, rendering the surface shell of the data, and rendering the semi-transparent volume of the data. A hybrid segmentation approach, designed for semi-automated segmentation of radiological image, such as CT, MRI, etc, is proposed in this thesis to get the organ or interested area from the image. This approach takes advantage of the region-based method and boundary-based methods. Three steps compose the hybrid approach: the first step gets coarse segmentation by fuzzy affinity and generates homogeneity operator; the second step divides the image by Voronoi Diagram and reclassifies the regions by the operator to refine segmentation from the previous step; the third step handles vague boundary by level set model. Topics for future research are mentioned in the end, including new supplement for DICOM standard for segmentation information storage, visualization of multimodal image information, and improvement of the segmentation approach to higher dimension.
This thesis presents methods for automated synthesis of flexible chip multiprocessor systems from parallel programs targeted at FPGAs to exploit both task-level parallelism and architecture customization. Automated synthesis is necessitated by the complexity of the design space. A detailed description of the design space is provided in order to determine which parameters should be modeled to facilitate automated synthesis by optimizing a cost function, the emphasis being placed on inclusive modeling of parameters from application, architectural and physical subspaces, as well as their joint coverage in order to avoid pre-constraining the design space. Given a parallel program and a set of an IP library, the automated synthesis problem is to simultaneously (i) select processors (ii) map and schedule tasks to them, and (iii) select one or several networks for inter-task communications such that design constraints and optimization objectives are met. The research objective in this thesis is to find a suitable model for automated synthesis, and to evaluate methods of using the model for architectural optimizations. Our contributions are a holistic approach for the design of such systems, corresponding models to facilitate automated synthesis, evaluation of optimization methods using state of the art integer linear and answer set programming, as well as the development of synthesis heuristics to solve runtime challenges.
Die Projektierung und Abwicklung sowie die statische und dynamische Analyse von Geschäftsprozessen im Bereich des Verwaltens und Regierens auf kommunaler, Länder- wie auch Bundesebene mit Hilfe von Informations- und Kommunikationstechniken beschäftigen Politiker und Strategen für Informationstechnologie ebenso wie die Öffentlichkeit seit Langem. Der hieraus entstandene Begriff E-Government wurde in der Folge aus den unterschiedlichsten technischen, politischen und semantischen Blickrichtungen beleuchtet.
Die vorliegende Arbeit konzentriert sich dabei auf zwei Schwerpunktthemen:
> Das erste Schwerpunktthema behandelt den Entwurf eines hierarchischen Architekturmodells, für welches sieben hierarchische Schichten identifiziert werden können. Diese erscheinen notwendig, aber auch hinreichend, um den allgemeinen Fall zu beschreiben. Den Hintergrund hierfür liefert die langjährige Prozess- und Verwaltungserfahrung als Leiter der EDV-Abteilung der Stadtverwaltung Landshut, eine kreisfreie Stadt mit rund 69.000 Einwohnern im Nordosten von München. Sie steht als Repräsentant für viele Verwaltungsvorgänge in der Bundesrepublik Deutschland und ist dennoch als Analyseobjekt in der Gesamtkomplexität und Prozessquantität überschaubar. Somit können aus der Analyse sämtlicher Kernabläufe statische und dynamische Strukturen extrahiert und abstrakt modelliert werden. Die Schwerpunkte liegen in der Darstellung der vorhandenen Bedienabläufe in einer Kommune. Die Transformation der Bedienanforderung in einem hierarchischen System, die Darstellung der Kontroll- und der Operationszustände in allen Schichten wie auch die Strategie der Fehlererkennung und Fehlerbehebung schaffen eine transparente Basis für umfassende Restrukturierungen und Optimierungen. Für die Modellierung wurde FMC-eCS eingesetzt, eine am Hasso-Plattner-Institut für Softwaresystemtechnik GmbH (HPI) im Fachgebiet Kommunikationssysteme entwickelte Methodik zur Modellierung zustandsdiskreter Systeme unter Berücksichtigung möglicher Inkonsistenzen
>Das zweite Schwerpunktthema widmet sich der quantitativen Modellierung und Optimierung von E-Government-Bediensystemen, welche am Beispiel des Bürgerbüros der Stadt Landshut im Zeitraum 2008 bis 2015 durchgeführt wurden. Dies erfolgt auf Basis einer kontinuierlichen Betriebsdatenerfassung mit aufwendiger Vorverarbeitung zur Extrahierung mathematisch beschreibbarer Wahrscheinlichkeitsverteilungen. Der hieraus entwickelte Dienstplan wurde hinsichtlich der erzielbaren Optimierungen im dauerhaften Echteinsatz verifiziert.
Student teachers often struggle to keep track of everything that is happening in the classroom, and particularly to notice and respond when students cause disruptions. The complexity of the classroom environment is a potential contributing factor that has not been empirically tested. In this experimental study, we utilized a virtual reality (VR) classroom to examine whether classroom complexity affects the likelihood of student teachers noticing disruptions and how they react after noticing. Classroom complexity was operationalized as the number of disruptions and the existence of overlapping disruptions (multidimensionality) as well as the existence of parallel teaching tasks (simultaneity). Results showed that student teachers (n = 50) were less likely to notice the scripted disruptions, and also less likely to respond to the disruptions in a comprehensive and effortful manner when facing greater complexity. These results may have implications for both teacher training and the design of VR for training or research purpose. This study contributes to the field from two aspects: 1) it revealed how features of the classroom environment can affect student teachers' noticing of and reaction to disruptions; and 2) it extends the functionality of the VR environment-from a teacher training tool to a testbed of fundamental classroom processes that are difficult to manipulate in real-life.
With increasing number of applications in Internet and mobile environments, distributed software systems are demanded to be more powerful and flexible, especially in terms of dynamism and security. This dissertation describes my work concerning three aspects: dynamic reconfiguration of component software, security control on middleware applications, and web services dynamic composition. Firstly, I proposed a technology named Routing Based Workflow (RBW) to model the execution and management of collaborative components and realize temporary binding for component instances. The temporary binding means component instances are temporarily loaded into a created execution environment to execute their functions, and then are released to their repository after executions. The temporary binding allows to create an idle execution environment for all collaborative components, on which the change operations can be immediately carried out. The changes on execution environment will result in a new collaboration of all involved components, and also greatly simplifies the classical issues arising from dynamic changes, such as consistency preserving etc. To demonstrate the feasibility of RBW, I created a dynamic secure middleware system - the Smart Data Server Version 3.0 (SDS3). In SDS3, an open source implementation of CORBA is adopted and modified as the communication infrastructure, and three secure components managed by RBW, are created to enhance the security on the access of deployed applications. SDS3 offers multi-level security control on its applications from strategy control to application-specific detail control. For the management by RBW, the strategy control of SDS3 applications could be dynamically changed by reorganizing the collaboration of the three secure components. In addition, I created the Dynamic Services Composer (DSC) based on Apache open source projects, Apache Axis and WSIF. In DSC, RBW is employed to model the interaction and collaboration of web services and to enable the dynamic changes on the flow structure of web services. Finally, overall performance tests were made to evaluate the efficiency of the developed RBW and SDS3. The results demonstrated that temporary binding of component instances makes slight impacts on the execution efficiency of components, and the blackout time arising from dynamic changes can be extremely reduced in any applications.
This thesis discusses challenges in IT security education, points out a gap between e-learning and practical education, and presents a work to fill the gap. E-learning is a flexible and personalized alternative to traditional education. Nonetheless, existing e-learning systems for IT security education have difficulties in delivering hands-on experience because of the lack of proximity. Laboratory environments and practical exercises are indispensable instruction tools to IT security education, but security education in conventional computer laboratories poses particular problems such as immobility as well as high creation and maintenance costs. Hence, there is a need to effectively transform security laboratories and practical exercises into e-learning forms. In this thesis, we introduce the Tele-Lab IT-Security architecture that allows students not only to learn IT security principles, but also to gain hands-on security experience by exercises in an online laboratory environment. In this architecture, virtual machines are used to provide safe user work environments instead of real computers. Thus, traditional laboratory environments can be cloned onto the Internet by software, which increases accessibility to laboratory resources and greatly reduces investment and maintenance costs. Under the Tele-Lab IT-Security framework, a set of technical solutions is also proposed to provide effective functionalities, reliability, security, and performance. The virtual machines with appropriate resource allocation, software installation, and system configurations are used to build lightweight security laboratories on a hosting computer. Reliability and availability of laboratory platforms are covered by a virtual machine management framework. This management framework provides necessary monitoring and administration services to detect and recover critical failures of virtual machines at run time. Considering the risk that virtual machines can be misused for compromising production networks, we present a security management solution to prevent the misuse of laboratory resources by security isolation at the system and network levels. This work is an attempt to bridge the gap between e-learning/tele-teaching and practical IT security education. It is not to substitute conventional teaching in laboratories but to add practical features to e-learning. This thesis demonstrates the possibility to implement hands-on security laboratories on the Internet reliably, securely, and economically.
3D from 2D touch
(2013)
While interaction with computers used to be dominated by mice and keyboards, new types of sensors now allow users to interact through touch, speech, or using their whole body in 3D space. These new interaction modalities are often referred to as "natural user interfaces" or "NUIs." While 2D NUIs have experienced major success on billions of mobile touch devices sold, 3D NUI systems have so far been unable to deliver a mobile form factor, mainly due to their use of cameras. The fact that cameras require a certain distance from the capture volume has prevented 3D NUI systems from reaching the flat form factor mobile users expect. In this dissertation, we address this issue by sensing 3D input using flat 2D sensors. The systems we present observe the input from 3D objects as 2D imprints upon physical contact. By sampling these imprints at very high resolutions, we obtain the objects' textures. In some cases, a texture uniquely identifies a biometric feature, such as the user's fingerprint. In other cases, an imprint stems from the user's clothing, such as when walking on multitouch floors. By analyzing from which part of the 3D object the 2D imprint results, we reconstruct the object's pose in 3D space. While our main contribution is a general approach to sensing 3D input on 2D sensors upon physical contact, we also demonstrate three applications of our approach. (1) We present high-accuracy touch devices that allow users to reliably touch targets that are a third of the size of those on current touch devices. We show that different users and 3D finger poses systematically affect touch sensing, which current devices perceive as random input noise. We introduce a model for touch that compensates for this systematic effect by deriving the 3D finger pose and the user's identity from each touch imprint. We then investigate this systematic effect in detail and explore how users conceptually touch targets. Our findings indicate that users aim by aligning visual features of their fingers with the target. We present a visual model for touch input that eliminates virtually all systematic effects on touch accuracy. (2) From each touch, we identify users biometrically by analyzing their fingerprints. Our prototype Fiberio integrates fingerprint scanning and a display into the same flat surface, solving a long-standing problem in human-computer interaction: secure authentication on touchscreens. Sensing 3D input and authenticating users upon touch allows Fiberio to implement a variety of applications that traditionally require the bulky setups of current 3D NUI systems. (3) To demonstrate the versatility of 3D reconstruction on larger touch surfaces, we present a high-resolution pressure-sensitive floor that resolves the texture of objects upon touch. Using the same principles as before, our system GravitySpace analyzes all imprints and identifies users based on their shoe soles, detects furniture, and enables accurate touch input using feet. By classifying all imprints, GravitySpace detects the users' body parts that are in contact with the floor and then reconstructs their 3D body poses using inverse kinematics. GravitySpace thus enables a range of applications for future 3D NUI systems based on a flat sensor, such as smart rooms in future homes. We conclude this dissertation by projecting into the future of mobile devices. Focusing on the mobility aspect of our work, we explore how NUI devices may one day augment users directly in the form of implanted devices.
Research publications and data nowadays should be publicly available on the internet and, theoretically, usable for everyone to develop further research, products, or services. The long-term accessibility of research data is, therefore, fundamental in the economy of the research production process. However, the availability of data is not sufficient by itself, but also their quality must be verifiable. Measures to ensure reuse and reproducibility need to include the entire research life cycle, from the experimental design to the generation of data, quality control, statistical analysis, interpretation, and validation of the results. Hence, high-quality records, particularly for providing a string of documents for the verifiable origin of data, are essential elements that can act as a certificate for potential users (customers). These records also improve the traceability and transparency of data and processes, therefore, improving the reliability of results. Standards for data acquisition, analysis, and documentation have been fostered in the last decade driven by grassroot initiatives of researchers and organizations such as the Research Data Alliance (RDA). Nevertheless, what is still largely missing in the life science academic research are agreed procedures for complex routine research workflows. Here, well-crafted documentation like standard operating procedures (SOPs) offer clear direction and instructions specifically designed to avoid deviations as an absolute necessity for reproducibility. Therefore, this paper provides a standardized workflow that explains step by step how to write an SOP to be used as a starting point for appropriate research documentation.
Research publications and data nowadays should be publicly available on the internet and, theoretically, usable for everyone to develop further research, products, or services. The long-term accessibility of research data is, therefore, fundamental in the economy of the research production process. However, the availability of data is not sufficient by itself, but also their quality must be verifiable. Measures to ensure reuse and reproducibility need to include the entire research life cycle, from the experimental design to the generation of data, quality control, statistical analysis, interpretation, and validation of the results. Hence, high-quality records, particularly for providing a string of documents for the verifiable origin of data, are essential elements that can act as a certificate for potential users (customers). These records also improve the traceability and transparency of data and processes, therefore, improving the reliability of results. Standards for data acquisition, analysis, and documentation have been fostered in the last decade driven by grassroot initiatives of researchers and organizations such as the Research Data Alliance (RDA). Nevertheless, what is still largely missing in the life science academic research are agreed procedures for complex routine research workflows. Here, well-crafted documentation like standard operating procedures (SOPs) offer clear direction and instructions specifically designed to avoid deviations as an absolute necessity for reproducibility. Therefore, this paper provides a standardized workflow that explains step by step how to write an SOP to be used as a starting point for appropriate research documentation.