004 Datenverarbeitung; Informatik
Refine
Year of publication
Document Type
- Doctoral Thesis (80) (remove)
Is part of the Bibliography
- yes (80) (remove)
Keywords
- Maschinelles Lernen (7)
- Machine Learning (6)
- Antwortmengenprogrammierung (5)
- answer set programming (4)
- Algorithmen (2)
- Algorithms (2)
- Answer Set Programming (2)
- Bildverarbeitung (2)
- Computergrafik (2)
- Computersicherheit (2)
Institute
- Institut für Informatik und Computational Science (80) (remove)
The main objective of this dissertation is to analyse prerequisites, expectations, apprehensions, and attitudes of students studying computer science, who are willing to gain a bachelor degree. The research will also investigate in the students’ learning style according to the Felder-Silverman model. These investigations fall in the attempt to make an impact on reducing the “dropout”/shrinkage rate among students, and to suggest a better learning environment.
The first investigation starts with a survey that has been made at the computer science department at the University of Baghdad to investigate the attitudes of computer science students in an environment dominated by women, showing the differences in attitudes between male and female students in different study years. Students are accepted to university studies via a centrally controlled admission procedure depending mainly on their final score at school. This leads to a high percentage of students studying subjects they do not want. Our analysis shows that 75% of the female students do not regret studying computer science although it was not their first choice. And according to statistics over previous years, women manage to succeed in their study and often graduate on top of their class. We finish with a comparison of attitudes between the freshman students of two different cultures and two different university enrolment procedures (University of Baghdad, in Iraq, and the University of Potsdam, in Germany) both with opposite gender majority.
The second step of investigation took place at the department of computer science at the University of Potsdam in Germany and analyzes the learning styles of students studying the three major fields of study offered by the department (computer science, business informatics, and computer science teaching). Investigating the differences in learning styles between the students of those study fields who usually take some joint courses is important to be aware of which changes are necessary to be adopted in the teaching methods to address those different students. It was a two stage study using two questionnaires; the main one is based on the Index of Learning Styles Questionnaire of B. A. Solomon and R. M. Felder, and the second questionnaire was an investigation on the students’ attitudes towards the findings of their personal first questionnaire. Our analysis shows differences in the preferences of learning style between male and female students of the different study fields, as well as differences between students with the different specialties (computer science, business informatics, and computer science teaching).
The third investigation looks closely into the difficulties, issues, apprehensions and expectations of freshman students studying computer science. The study took place at the computer science department at the University of Potsdam with a volunteer sample of students. The goal is to determine and discuss the difficulties and issues that they are facing in their study that may lead them to think in dropping-out, changing the study field, or changing the university. The research continued with the same sample of students (with business informatics students being the majority) through more than three semesters. Difficulties and issues during the study were documented, as well as students’ attitudes, apprehensions, and expectations. Some of the professors and lecturers opinions and solutions to some students’ problems were also documented. Many participants had apprehensions and difficulties, especially towards informatics subjects. Some business informatics participants began to think of changing the university, in particular when they reached their third semester, others thought about changing their field of study. Till the end of this research, most of the participants continued in their studies (the study they have started with or the new study they have changed to) without leaving the higher education system.
Companies develop process models to explicitly describe their business operations. In the same time, business operations, business processes, must adhere to various types of compliance requirements. Regulations, e.g., Sarbanes Oxley Act of 2002, internal policies, best practices are just a few sources of compliance requirements. In some cases, non-adherence to compliance requirements makes the organization subject to legal punishment. In other cases, non-adherence to compliance leads to loss of competitive advantage and thus loss of market share. Unlike the classical domain-independent behavioral correctness of business processes, compliance requirements are domain-specific. Moreover, compliance requirements change over time. New requirements might appear due to change in laws and adoption of new policies. Compliance requirements are offered or enforced by different entities that have different objectives behind these requirements. Finally, compliance requirements might affect different aspects of business processes, e.g., control flow and data flow. As a result, it is infeasible to hard-code compliance checks in tools. Rather, a repeatable process of modeling compliance rules and checking them against business processes automatically is needed. This thesis provides a formal approach to support process design-time compliance checking. Using visual patterns, it is possible to model compliance requirements concerning control flow, data flow and conditional flow rules. Each pattern is mapped into a temporal logic formula. The thesis addresses the problem of consistency checking among various compliance requirements, as they might stem from divergent sources. Also, the thesis contributes to automatically check compliance requirements against process models using model checking. We show that extra domain knowledge, other than expressed in compliance rules, is needed to reach correct decisions. In case of violations, we are able to provide a useful feedback to the user. The feedback is in the form of parts of the process model whose execution causes the violation. In some cases, our approach is capable of providing automated remedy of the violation.
One of the main problems in machine learning is to train a predictive model from training data and to make predictions on test data. Most predictive models are constructed under the assumption that the training data is governed by the exact same distribution which the model will later be exposed to. In practice, control over the data collection process is often imperfect. A typical scenario is when labels are collected by questionnaires and one does not have access to the test population. For example, parts of the test population are underrepresented in the survey, out of reach, or do not return the questionnaire. In many applications training data from the test distribution are scarce because they are difficult to obtain or very expensive. Data from auxiliary sources drawn from similar distributions are often cheaply available. This thesis centers around learning under differing training and test distributions and covers several problem settings with different assumptions on the relationship between training and test distributions-including multi-task learning and learning under covariate shift and sample selection bias. Several new models are derived that directly characterize the divergence between training and test distributions, without the intermediate step of estimating training and test distributions separately. The integral part of these models are rescaling weights that match the rescaled or resampled training distribution to the test distribution. Integrated models are studied where only one optimization problem needs to be solved for learning under differing distributions. With a two-step approximation to the integrated models almost any supervised learning algorithm can be adopted to biased training data. In case studies on spam filtering, HIV therapy screening, targeted advertising, and other applications the performance of the new models is compared to state-of-the-art reference methods.
The programmable network envisioned in the 1990s within standardization and research for the Intelligent Network is currently coming into reality using IPbased Next Generation Networks (NGN) and applying Service-Oriented Architecture (SOA) principles for service creation, execution, and hosting. SOA is the foundation for both next-generation telecommunications and middleware architectures, which are rapidly converging on top of commodity transport services. Services such as triple/quadruple play, multimedia messaging, and presence are enabled by the emerging service-oriented IPMultimedia Subsystem (IMS), and allow telecommunications service providers to maintain, if not improve, their position in the marketplace. SOA becomes the de facto standard in next-generation middleware systems as the system model of choice to interconnect service consumers and providers within and between enterprises. We leverage previous research activities in overlay networking technologies along with recent advances in network abstraction, service exposure, and service creation to develop a paradigm for a service environment providing converged Internet and Telecommunications services that we call Service Broker. Such a Service Broker provides mechanisms to combine and mediate between different service paradigms from the two domains Internet/WWW and telecommunications. Furthermore, it enables the composition of services across these domains and is capable of defining and applying temporal constraints during creation and execution time. By adding network-awareness into the service fabric, such a Service Broker may also act as a next generation network-to-service element allowing the composition of crossdomain and cross-layer network and service resources. The contribution of this research is threefold: first, we analyze and classify principles and technologies from Information Technologies (IT) and telecommunications to identify and discuss issues allowing cross-domain composition in a converging service layer. Second, we discuss service composition methods allowing the creation of converged services on an abstract level; in particular, we present a formalized method for model-checking of such compositions. Finally, we propose a Service Broker architecture converging Internet and Telecom services. This environment enables cross-domain feature interaction in services through formalized obligation policies acting as constraints during service discovery, creation, and execution time.
Die automatische Informationsextraktion (IE) aus unstrukturierten Texten ermöglicht völlig neue Wege, auf relevante Informationen zuzugreifen und deren Inhalte zu analysieren, die weit über bisherige Verfahren zur Stichwort-basierten Dokumentsuche hinausgehen. Die Entwicklung von Programmen zur Extraktion von maschinenlesbaren Daten aus Texten erfordert jedoch nach wie vor die Entwicklung von domänenspezifischen Extraktionsprogrammen. Insbesondere im Bereich der Enterprise Search (der Informationssuche im Unternehmensumfeld), in dem eine große Menge von heterogenen Dokumenttypen existiert, ist es oft notwendig ad-hoc Programm-module zur Extraktion von geschäftsrelevanten Entitäten zu entwickeln, die mit generischen Modulen in monolithischen IE-Systemen kombiniert werden. Dieser Umstand ist insbesondere kritisch, da potentiell für jeden einzelnen Anwendungsfall ein von Grund auf neues IE-System entwickelt werden muss. Die vorliegende Dissertation untersucht die effiziente Entwicklung und Ausführung von IE-Systemen im Kontext der Enterprise Search und effektive Methoden zur Ausnutzung bekannter strukturierter Daten im Unternehmenskontext für die Extraktion und Identifikation von geschäftsrelevanten Entitäten in Doku-menten. Grundlage der Arbeit ist eine neuartige Plattform zur Komposition von IE-Systemen auf Basis der Beschreibung des Datenflusses zwischen generischen und anwendungsspezifischen IE-Modulen. Die Plattform unterstützt insbesondere die Entwicklung und Wiederverwendung von generischen IE-Modulen und zeichnet sich durch eine höhere Flexibilität und Ausdrucksmächtigkeit im Vergleich zu vorherigen Methoden aus. Ein in der Dissertation entwickeltes Verfahren zur Dokumentverarbeitung interpretiert den Daten-austausch zwischen IE-Modulen als Datenströme und ermöglicht damit eine weitgehende Parallelisierung von einzelnen Modulen. Die autonome Ausführung der Module führt zu einer wesentlichen Beschleu-nigung der Verarbeitung von Einzeldokumenten und verbesserten Antwortzeiten, z. B. für Extraktions-dienste. Bisherige Ansätze untersuchen lediglich die Steigerung des durchschnittlichen Dokumenten-durchsatzes durch verteilte Ausführung von Instanzen eines IE-Systems. Die Informationsextraktion im Kontext der Enterprise Search unterscheidet sich z. B. von der Extraktion aus dem World Wide Web dadurch, dass in der Regel strukturierte Referenzdaten z. B. in Form von Unternehmensdatenbanken oder Terminologien zur Verfügung stehen, die oft auch die Beziehungen von Entitäten beschreiben. Entitäten im Unternehmensumfeld haben weiterhin bestimmte Charakteristiken: Eine Klasse von relevanten Entitäten folgt bestimmten Bildungsvorschriften, die nicht immer bekannt sind, auf die aber mit Hilfe von bekannten Beispielentitäten geschlossen werden kann, so dass unbekannte Entitäten extrahiert werden können. Die Bezeichner der anderen Klasse von Entitäten haben eher umschreibenden Charakter. Die korrespondierenden Umschreibungen in Texten können variieren, wodurch eine Identifikation derartiger Entitäten oft erschwert wird. Zur effizienteren Entwicklung von IE-Systemen wird in der Dissertation ein Verfahren untersucht, das alleine anhand von Beispielentitäten effektive Reguläre Ausdrücke zur Extraktion von unbekannten Entitäten erlernt und damit den manuellen Aufwand in derartigen Anwendungsfällen minimiert. Verschiedene Generalisierungs- und Spezialisierungsheuristiken erkennen Muster auf verschiedenen Abstraktionsebenen und schaffen dadurch einen Ausgleich zwischen Genauigkeit und Vollständigkeit bei der Extraktion. Bekannte Regellernverfahren im Bereich der Informationsextraktion unterstützen die beschriebenen Problemstellungen nicht, sondern benötigen einen (annotierten) Dokumentenkorpus. Eine Methode zur Identifikation von Entitäten, die durch Graph-strukturierte Referenzdaten vordefiniert sind, wird als dritter Schwerpunkt untersucht. Es werden Verfahren konzipiert, welche über einen exakten Zeichenkettenvergleich zwischen Text und Referenzdatensatz hinausgehen und Teilübereinstimmungen und Beziehungen zwischen Entitäten zur Identifikation und Disambiguierung heranziehen. Das in der Arbeit vorgestellte Verfahren ist bisherigen Ansätzen hinsichtlich der Genauigkeit und Vollständigkeit bei der Identifikation überlegen.
In many applications one is faced with the problem of inferring some functional relation between input and output variables from given data. Consider, for instance, the task of email spam filtering where one seeks to find a model which automatically assigns new, previously unseen emails to class spam or non-spam. Building such a predictive model based on observed training inputs (e.g., emails) with corresponding outputs (e.g., spam labels) is a major goal of machine learning. Many learning methods assume that these training data are governed by the same distribution as the test data which the predictive model will be exposed to at application time. That assumption is violated when the test data are generated in response to the presence of a predictive model. This becomes apparent, for instance, in the above example of email spam filtering. Here, email service providers employ spam filters and spam senders engineer campaign templates such as to achieve a high rate of successful deliveries despite any filters. Most of the existing work casts such situations as learning robust models which are unsusceptible against small changes of the data generation process. The models are constructed under the worst-case assumption that these changes are performed such to produce the highest possible adverse effect on the performance of the predictive model. However, this approach is not capable to realistically model the true dependency between the model-building process and the process of generating future data. We therefore establish the concept of prediction games: We model the interaction between a learner, who builds the predictive model, and a data generator, who controls the process of data generation, as an one-shot game. The game-theoretic framework enables us to explicitly model the players' interests, their possible actions, their level of knowledge about each other, and the order at which they decide for an action. We model the players' interests as minimizing their own cost function which both depend on both players' actions. The learner's action is to choose the model parameters and the data generator's action is to perturbate the training data which reflects the modification of the data generation process with respect to the past data. We extensively study three instances of prediction games which differ regarding the order in which the players decide for their action. We first assume that both player choose their actions simultaneously, that is, without the knowledge of their opponent's decision. We identify conditions under which this Nash prediction game has a meaningful solution, that is, a unique Nash equilibrium, and derive algorithms that find the equilibrial prediction model. As a second case, we consider a data generator who is potentially fully informed about the move of the learner. This setting establishes a Stackelberg competition. We derive a relaxed optimization criterion to determine the solution of this game and show that this Stackelberg prediction game generalizes existing prediction models. Finally, we study the setting where the learner observes the data generator's action, that is, the (unlabeled) test data, before building the predictive model. As the test data and the training data may be governed by differing probability distributions, this scenario reduces to learning under covariate shift. We derive a new integrated as well as a two-stage method to account for this data set shift. In case studies on email spam filtering we empirically explore properties of all derived models as well as several existing baseline methods. We show that spam filters resulting from the Nash prediction game as well as the Stackelberg prediction game in the majority of cases outperform other existing baseline methods.
An increasing number of applications requires user interfaces that facilitate the handling of large geodata sets. Using virtual 3D city models, complex geospatial information can be communicated visually in an intuitive way. Therefore, real-time visualization of virtual 3D city models represents a key functionality for interactive exploration, presentation, analysis, and manipulation of geospatial data. This thesis concentrates on the development and implementation of concepts and techniques for real-time city model visualization. It discusses rendering algorithms as well as complementary modeling concepts and interaction techniques. Particularly, the work introduces a new real-time rendering technique to handle city models of high complexity concerning texture size and number of textures. Such models are difficult to handle by current technology, primarily due to two problems: - Limited texture memory: The amount of simultaneously usable texture data is limited by the memory of the graphics hardware. - Limited number of textures: Using several thousand different textures simultaneously causes significant performance problems due to texture switch operations during rendering. The multiresolution texture atlases approach, introduced in this thesis, overcomes both problems. During rendering, it permanently maintains a small set of textures that are sufficient for the current view and the screen resolution available. The efficiency of multiresolution texture atlases is evaluated in performance tests. To summarize, the results demonstrate that the following goals have been achieved: - Real-time rendering becomes possible for 3D scenes whose amount of texture data exceeds the main memory capacity. - Overhead due to texture switches is kept permanently low, so that the number of different textures has no significant effect on the rendering frame rate. Furthermore, this thesis introduces two new approaches for real-time city model visualization that use textures as core visualization elements: - An approach for visualization of thematic information. - An approach for illustrative visualization of 3D city models. Both techniques demonstrate that multiresolution texture atlases provide a basic functionality for the development of new applications and systems in the domain of city model visualization.
This thesis presents novel ideas and research findings for the Web of Data – a global data space spanning many so-called Linked Open Data sources. Linked Open Data adheres to a set of simple principles to allow easy access and reuse for data published on the Web. Linked Open Data is by now an established concept and many (mostly academic) publishers adopted the principles building a powerful web of structured knowledge available to everybody. However, so far, Linked Open Data does not yet play a significant role among common web technologies that currently facilitate a high-standard Web experience. In this work, we thoroughly discuss the state-of-the-art for Linked Open Data and highlight several shortcomings – some of them we tackle in the main part of this work. First, we propose a novel type of data source meta-information, namely the topics of a dataset. This information could be published with dataset descriptions and support a variety of use cases, such as data source exploration and selection. For the topic retrieval, we present an approach coined Annotated Pattern Percolation (APP), which we evaluate with respect to topics extracted from Wikipedia portals. Second, we contribute to entity linking research by presenting an optimization model for joint entity linking, showing its hardness, and proposing three heuristics implemented in the LINked Data Alignment (LINDA) system. Our first solution can exploit multi-core machines, whereas the second and third approach are designed to run in a distributed shared-nothing environment. We discuss and evaluate the properties of our approaches leading to recommendations which algorithm to use in a specific scenario. The distributed algorithms are among the first of their kind, i.e., approaches for joint entity linking in a distributed fashion. Also, we illustrate that we can tackle the entity linking problem on the very large scale with data comprising more than 100 millions of entity representations from very many sources. Finally, we approach a sub-problem of entity linking, namely the alignment of concepts. We again target a method that looks at the data in its entirety and does not neglect existing relations. Also, this concept alignment method shall execute very fast to serve as a preprocessing for further computations. Our approach, called Holistic Concept Matching (HCM), achieves the required speed through grouping the input by comparing so-called knowledge representations. Within the groups, we perform complex similarity computations, relation conclusions, and detect semantic contradictions. The quality of our result is again evaluated on a large and heterogeneous dataset from the real Web. In summary, this work contributes a set of techniques for enhancing the current state of the Web of Data. All approaches have been tested on large and heterogeneous real-world input.
Accurately solving classification problems nowadays is likely to be the most relevant machine learning task. Binary classification separating two classes only is algorithmically simpler but has fewer potential applications as many real-world problems are multi-class. On the reverse, separating only a subset of classes simplifies the classification task. Even though existing multi-class machine learning algorithms are very flexible regarding the number of classes, they assume that the target set Y is fixed and cannot be restricted once the training is finished. On the other hand, existing state-of-the-art production environments are becoming increasingly interconnected with the advance of Industry 4.0 and related technologies such that additional information can simplify the respective classification problems. In light of this, the main aim of this thesis is to introduce dynamic classification that generalizes multi-class classification such that the target class set can be restricted arbitrarily to a non-empty class subset M of Y at any time between two consecutive predictions.
This task is solved by a combination of two algorithmic approaches. First, classifier calibration, which transforms predictions into posterior probability estimates that are intended to be well calibrated. The analysis provided focuses on monotonic calibration and in particular corrects wrong statements that appeared in the literature. It also reveals that bin-based evaluation metrics, which became popular in recent years, are unjustified and should not be used at all. Next, the validity of Platt scaling, which is the most relevant parametric calibration approach, is analyzed in depth. In particular, its optimality for classifier predictions distributed according to four different families of probability distributions as well its equivalence with Beta calibration up to a sigmoidal preprocessing are proven. For non-monotonic calibration, extended variants on kernel density estimation and the ensemble method EKDE are introduced. Finally, the calibration techniques are evaluated using a simulation study with complete information as well as on a selection of 46 real-world data sets.
Building on this, classifier calibration is applied as part of decomposition-based classification that aims to reduce multi-class problems to simpler (usually binary) prediction tasks. For the involved fusing step performed at prediction time, a new approach based on evidence theory is presented that uses classifier calibration to model mass functions. This allows the analysis of decomposition-based classification against a strictly formal background and to prove closed-form equations for the overall combinations. Furthermore, the same formalism leads to a consistent integration of dynamic class information, yielding a theoretically justified and computationally tractable dynamic classification model. The insights gained from this modeling are combined with pairwise coupling, which is one of the most relevant reduction-based classification approaches, such that all individual predictions are combined with a weight. This not only generalizes existing works on pairwise coupling but also enables the integration of dynamic class information.
Lastly, a thorough empirical study is performed that compares all newly introduced approaches to existing state-of-the-art techniques. For this, evaluation metrics for dynamic classification are introduced that depend on corresponding sampling strategies. Thereafter, these are applied during a three-part evaluation. First, support vector machines and random forests are applied on 26 data sets from the UCI Machine Learning Repository. Second, two state-of-the-art deep neural networks are evaluated on five benchmark data sets from a relatively recent reference work. Here, computationally feasible strategies to apply the presented algorithms in combination with large-scale models are particularly relevant because a naive application is computationally intractable. Finally, reference data from a real-world process allowing the inclusion of dynamic class information are collected and evaluated. The results show that in combination with support vector machines and random forests, pairwise coupling approaches yield the best results, while in combination with deep neural networks, differences between the different approaches are mostly small to negligible. Most importantly, all results empirically confirm that dynamic classification succeeds in improving the respective prediction accuracies. Therefore, it is crucial to pass dynamic class information in respective applications, which requires an appropriate digital infrastructure.
With the rise of electronic integration between organizations, the need for a precise specification of interaction behavior increases. Information systems, replacing interaction previously carried out by humans via phone, faxes and emails, require a precise specification for handling all possible situations. Such interaction behavior is described in process choreographies. Choreographies enumerate the roles involved, the allowed interactions, the message contents and the behavioral dependencies between interactions. Choreographies serve as interaction contract and are the starting point for adapting existing business processes and systems or for implementing new software components. As a thorough analysis and comparison of choreography modeling languages is missing in the literature, this thesis introduces a requirements framework for choreography languages and uses it for comparing current choreography languages. Language proposals for overcoming the limitations are given for choreography modeling on the conceptual and on the technical level. Using an interconnection modeling style, behavioral dependencies are defined on a per-role basis and different roles are interconnected using message flow. This thesis reveals a number of modeling "anti-patterns" for interconnection modeling, motivating further investigations on choreography languages following the interaction modeling style. Here, interactions are seen as atomic building blocks and the behavioral dependencies between them are defined globally. Two novel language proposals are put forward for this modeling style which have already influenced industrial standardization initiatives. While avoiding many of the pitfalls of interconnection modeling, new anomalies can arise in interaction models. A choreography might not be realizable, i.e. there does not exist a set of interacting roles that collectively realize the specified behavior. This thesis investigates different dimensions of realizability.
Services that operate over the Internet are under constant threat of being exposed to fraudulent use. Maintaining good user experience for legitimate users often requires the classification of entities as malicious or legitimate in order to initiate countermeasures. As an example, inbound email spam filters decide for spam or non-spam. They can base their decision on both the content of each email as well as on features that summarize prior emails received from the sending server. In general, discriminative classification methods learn to distinguish positive from negative entities. Each decision for a label may be based on features of the entity and related entities. When labels of related entities have strong interdependencies---as can be assumed e.g. for emails being delivered by the same user---classification decisions should not be made independently and dependencies should be modeled in the decision function. This thesis addresses the formulation of discriminative classification problems that are tailored for the specific demands of the following three Internet security applications. Theoretical and algorithmic solutions are devised to protect an email service against flooding of user inboxes, to mitigate abusive usage of outbound email servers, and to protect web servers against distributed denial of service attacks.
In the application of filtering an inbound email stream for unsolicited emails, utilizing features that go beyond each individual email's content can be valuable. Information about each sending mail server can be aggregated over time and may help in identifying unwanted emails. However, while this information will be available to the deployed email filter, some parts of the training data that are compiled by third party providers may not contain this information. The missing features have to be estimated at training time in order to learn a classification model. In this thesis an algorithm is derived that learns a decision function that integrates over a distribution of values for each missing entry. The distribution of missing values is a free parameter that is optimized to learn an optimal decision function.
The outbound stream of emails of an email service provider can be separated by the customer IDs that ask for delivery. All emails that are sent by the same ID in the same period of time are related, both in content and in label. Hijacked customer accounts may send batches of unsolicited emails to other email providers, which in turn might blacklist the sender's email servers after detection of incoming spam emails. The risk of being blocked from further delivery depends on the rate of outgoing unwanted emails and the duration of high spam sending rates. An optimization problem is developed that minimizes the expected cost for the email provider by learning a decision function that assigns a limit on the sending rate to customers based on the each customer's email stream.
Identifying attacking IPs during HTTP-level DDoS attacks allows to block those IPs from further accessing the web servers. DDoS attacks are usually carried out by infected clients that are members of the same botnet and show similar traffic patterns. HTTP-level attacks aim at exhausting one or more resources of the web server infrastructure, such as CPU time. If the joint set of attackers cannot increase resource usage close to the maximum capacity, no effect will be experienced by legitimate users of hosted web sites. However, if the additional load raises the computational burden towards the critical range, user experience will degrade until service may be unavailable altogether. As the loss of missing one attacker depends on block decisions for other attackers---if most other attackers are detected, not blocking one client will likely not be harmful---a structured output model has to be learned. In this thesis an algorithm is developed that learns a structured prediction decoder that searches the space of label assignments, guided by a policy.
Each model is evaluated on real-world data and is compared to reference methods. The results show that modeling each classification problem according to the specific demands of the task improves performance over solutions that do not consider the constraints inherent to an application.
Gerade in den letzten Jahren erfuhr Open Source Software (OSS) eine zunehmende Verbreitung und Popularität und hat sich in verschiedenen Anwendungsdomänen etabliert. Die Prozesse, welche sich im Kontext der OSS-Entwicklung (auch: OSSD – Open Source Software-Development) evolutionär herausgebildet haben, weisen in den verschiedenen OSS-Entwicklungsprojekten z.T. ähnliche Eigenschaften und Strukturen auf und auch die involvierten Entitäten, wie z.B. Artefakte, Rollen oder Software-Werkzeuge sind weitgehend miteinander vergleichbar. Dies motiviert den Gedanken, ein verallgemeinerbares Modell zu entwickeln, welches die generalisierbaren Entwicklungsprozesse im Kontext von OSS zu einem übertragbaren Modell abstrahiert. Auch in der Wissenschaftsdisziplin des Software Engineering (SE) wurde bereits erkannt, dass sich der OSSD-Ansatz in verschiedenen Aspekten erheblich von klassischen (proprietären) Modellen des SE unterscheidet und daher diese Methoden einer eigenen wissenschaftlichen Betrachtung bedürfen. In verschiedenen Publikationen wurden zwar bereits einzelne Aspekte der OSS-Entwicklung analysiert und Theorien über die zugrundeliegenden Entwicklungsmethoden formuliert, aber es existiert noch keine umfassende Beschreibung der typischen Prozesse der OSSD-Methodik, die auf einer empirischen Untersuchung existierender OSS-Entwicklungsprojekte basiert. Da dies eine Voraussetzung für die weitere wissenschaftliche Auseinandersetzung mit OSSD-Prozessen darstellt, wird im Rahmen dieser Arbeit auf der Basis vergleichender Fallstudien ein deskriptives Modell der OSSD-Prozesse hergeleitet und mit Modellierungselementen der UML formalisiert beschrieben. Das Modell generalisiert die identifizierten Prozesse, Prozessentitäten und Software-Infrastrukturen der untersuchten OSSD-Projekte. Es basiert auf einem eigens entwickelten Metamodell, welches die zu analysierenden Entitäten identifiziert und die Modellierungssichten und -elemente beschreibt, die zur UML-basierten Beschreibung der Entwicklungsprozesse verwendet werden. In einem weiteren Arbeitsschritt wird eine weiterführende Analyse des identifizierten Modells durchgeführt, um Implikationen, und Optimierungspotentiale aufzuzeigen. Diese umfassen beispielsweise die ungenügende Plan- und Terminierbarkeit von Prozessen oder die beobachtete Tendenz von OSSD-Akteuren, verschiedene Aktivitäten mit unterschiedlicher Intensität entsprechend der subjektiv wahrgenommenen Anreize auszuüben, was zur Vernachlässigung einiger Prozesse führt. Anschließend werden Optimierungszielstellungen dargestellt, die diese Unzulänglichkeiten adressieren, und ein Optimierungsansatz zur Verbesserung des OSSD-Modells wird beschrieben. Dieser Ansatz umfasst die Erweiterung der identifizierten Rollen, die Einführung neuer oder die Erweiterung bereits identifizierter Prozesse und die Modifikation oder Erweiterung der Artefakte des generalisierten OSS-Entwicklungsmodells. Die vorgestellten Modellerweiterungen dienen vor allem einer gesteigerten Qualitätssicherung und der Kompensation von vernachlässigten Prozessen, um sowohl die entwickelte Software- als auch die Prozessqualität im OSSD-Kontext zu verbessern. Desweiteren werden Softwarefunktionalitäten beschrieben, welche die identifizierte bestehende Software-Infrastruktur erweitern und eine gesamtheitlichere, softwaretechnische Unterstützung der OSSD-Prozesse ermöglichen sollen. Abschließend werden verschiedene Anwendungsszenarien der Methoden des OSS-Entwicklungsmodells, u.a. auch im kommerziellen SE, identifiziert und ein Implementierungsansatz basierend auf der OSS GENESIS vorgestellt, der zur Implementierung und Unterstützung des OSSD-Modells verwendet werden kann.
The goal of a Brain-Computer Interface (BCI) consists of the development of a unidirectional interface between a human and a computer to allow control of a device only via brain signals. While the BCI systems of almost all other groups require the user to be trained over several weeks or even months, the group of Prof. Dr. Klaus-Robert Müller in Berlin and Potsdam, which I belong to, was one of the first research groups in this field which used machine learning techniques on a large scale. The adaptivity of the processing system to the individual brain patterns of the subject confers huge advantages for the user. Thus BCI research is considered a hot topic in machine learning and computer science. It requires interdisciplinary cooperation between disparate fields such as neuroscience, since only by combining machine learning and signal processing techniques based on neurophysiological knowledge will the largest progress be made. In this work I particularly deal with my part of this project, which lies mainly in the area of computer science. I have considered the following three main points: <b>Establishing a performance measure based on information theory:</b> I have critically illuminated the assumptions of Shannon's information transfer rate for application in a BCI context. By establishing suitable coding strategies I was able to show that this theoretical measure approximates quite well to what is practically achieveable. <b>Transfer and development of suitable signal processing and machine learning techniques:</b> One substantial component of my work was to develop several machine learning and signal processing algorithms to improve the efficiency of a BCI. Based on the neurophysiological knowledge that several independent EEG features can be observed for some mental states, I have developed a method for combining different and maybe independent features which improved performance. In some cases the performance of the combination algorithm outperforms the best single performance by more than 50 %. Furthermore, I have theoretically and practically addressed via the development of suitable algorithms the question of the optimal number of classes which should be used for a BCI. It transpired that with BCI performances reported so far, three or four different mental states are optimal. For another extension I have combined ideas from signal processing with those of machine learning since a high gain can be achieved if the temporal filtering, i.e., the choice of frequency bands, is automatically adapted to each subject individually. <b>Implementation of the Berlin brain computer interface and realization of suitable experiments:</b> Finally a further substantial component of my work was to realize an online BCI system which includes the developed methods, but is also flexible enough to allow the simple realization of new algorithms and ideas. So far, bitrates of up to 40 bits per minute have been achieved with this system by absolutely untrained users which, compared to results of other groups, is highly successful.
In order to face the rapidly increasing need for computational resources of various scientific and engineering applications one has to think of new ways to make more efficient use of the worlds current computational resources. In this respect, the growing speed of wide area networks made a new kind of distributed computing possible: Metacomputing or (distributed) Grid computing. This is a rather new and uncharted field in computational science. The rapidly increasing speed of networks even outperforms the average increase of processor speed: Processor speeds double on average each 18 month whereas network bandwidths double every 9 months. Due to this development of local and wide area networks Grid computing will certainly play a key role in the future of parallel computing. This type of distributed computing, however, distinguishes from the traditional parallel computing in many ways since it has to deal with many problems not occurring in classical parallel computing. Those problems are for example heterogeneity, authentication and slow networks to mention only a few. Some of those problems, e.g. the allocation of distributed resources along with the providing of information about these resources to the application have been already attacked by the Globus software. Unfortunately, as far as we know, hardly any application or middle-ware software takes advantage of this information, since most parallelizing algorithms for finite differencing codes are implicitly designed for single supercomputer or cluster execution. We show that although it is possible to apply classical parallelizing algorithms in a Grid environment, in most cases the observed efficiency of the executed code is very poor. In this work we are closing this gap. In our thesis, we will - show that an execution of classical parallel codes in Grid environments is possible but very slow - analyze this situation of bad performance, nail down bottlenecks in communication, remove unnecessary overhead and other reasons for low performance - develop new and advanced algorithms for parallelisation that are aware of a Grid environment in order to generelize the traditional parallelization schemes - implement and test these new methods, replace and compare with the classical ones - introduce dynamic strategies that automatically adapt the running code to the nature of the underlying Grid environment. The higher the performance one can achieve for a single application by manual tuning for a Grid environment, the lower the chance that those changes are widely applicable to other programs. In our analysis as well as in our implementation we tried to keep the balance between high performance and generality. None of our changes directly affect code on the application level which makes our algorithms applicable to a whole class of real world applications. The implementation of our work is done within the Cactus framework using the Globus toolkit, since we think that these are the most reliable and advanced programming frameworks for supporting computations in Grid environments. On the other hand, however, we tried to be as general as possible, i.e. all methods and algorithms discussed in this thesis are independent of Cactus or Globus.
Modern biological analysis techniques supply scientists with various forms of data. One category of such data are the so called "expression data". These data indicate the quantities of biochemical compounds present in tissue samples. Recently, expression data can be generated at a high speed. This leads in turn to amounts of data no longer analysable by classical statistical techniques. Systems biology is the new field that focuses on the modelling of this information. At present, various methods are used for this purpose. One superordinate class of these methods is machine learning. Methods of this kind had, until recently, predominantly been used for classification and prediction tasks. This neglected a powerful secondary benefit: the ability to induce interpretable models. Obtaining such models from data has become a key issue within Systems biology. Numerous approaches have been proposed and intensively discussed. This thesis focuses on the examination and exploitation of one basic technique: decision trees. The concept of comparing sets of decision trees is developed. This method offers the possibility of identifying significant thresholds in continuous or discrete valued attributes through their corresponding set of decision trees. Finding significant thresholds in attributes is a means of identifying states in living organisms. Knowing about states is an invaluable clue to the understanding of dynamic processes in organisms. Applied to metabolite concentration data, the proposed method was able to identify states which were not found with conventional techniques for threshold extraction. A second approach exploits the structure of sets of decision trees for the discovery of combinatorial dependencies between attributes. Previous work on this issue has focused either on expensive computational methods or the interpretation of single decision trees a very limited exploitation of the data. This has led to incomplete or unstable results. That is why a new method is developed that uses sets of decision trees to overcome these limitations. Both the introduced methods are available as software tools. They can be applied consecutively or separately. That way they make up a package of analytical tools that usefully supplement existing methods. By means of these tools, the newly introduced methods were able to confirm existing knowledge and to suggest interesting and new relationships between metabolites.
Answer Set Programming (ASP) is an emerging paradigm for declarative programming, in which a computational problem is specified by a logic program such that particular models, called answer sets, match solutions. ASP faces a growing range of applications, demanding for high-performance tools able to solve complex problems. ASP integrates ideas from a variety of neighboring fields. In particular, automated techniques to search for answer sets are inspired by Boolean Satisfiability (SAT) solving approaches. While the latter have firm proof-theoretic foundations, ASP lacks formal frameworks for characterizing and comparing solving methods. Furthermore, sophisticated search patterns of modern SAT solvers, successfully applied in areas like, e.g., model checking and verification, are not yet established in ASP solving. We address these deficiencies by, for one, providing proof-theoretic frameworks that allow for characterizing, comparing, and analyzing approaches to answer set computation. For another, we devise modern ASP solving algorithms that integrate and extend state-of-the-art techniques for Boolean constraint solving. We thus contribute to the understanding of existing ASP solving approaches and their interconnections as well as to their enhancement by incorporating sophisticated search patterns. The central idea of our approach is to identify atomic as well as composite constituents of a propositional logic program with Boolean variables. This enables us to describe fundamental inference steps, and to selectively combine them in proof-theoretic characterizations of various ASP solving methods. In particular, we show that different concepts of case analyses applied by existing ASP solvers implicate mutual exponential separations regarding their best-case complexities. We also develop a generic proof-theoretic framework amenable to language extensions, and we point out that exponential separations can likewise be obtained due to case analyses on them. We further exploit fundamental inference steps to derive Boolean constraints characterizing answer sets. They enable the conception of ASP solving algorithms including search patterns of modern SAT solvers, while also allowing for direct technology transfers between the areas of ASP and SAT solving. Beyond the search for one answer set of a logic program, we address the enumeration of answer sets and their projections to a subvocabulary, respectively. The algorithms we develop enable repetition-free enumeration in polynomial space without being intrusive, i.e., they do not necessitate any modifications of computations before an answer set is found. Our approach to ASP solving is implemented in clasp, a state-of-the-art Boolean constraint solver that has successfully participated in recent solver competitions. Although we do here not address the implementation techniques of clasp or all of its features, we present the principles of its success in the context of ASP solving.
Quantified Boolean formulas (QBFs) play an important role in theoretical computer science. QBF extends propositional logic in such a way that many advanced forms of reasoning can be easily formulated and evaluated. In this dissertation we present our ZQSAT, which is an algorithm for evaluating quantified Boolean formulas. ZQSAT is based on ZBDD: Zero-Suppressed Binary Decision Diagram , which is a variant of BDD, and an adopted version of the DPLL algorithm. It has been implemented in C using the CUDD: Colorado University Decision Diagram package. The capability of ZBDDs in storing sets of subsets efficiently enabled us to store the clauses of a QBF very compactly and let us to embed the notion of memoization to the DPLL algorithm. These points led us to implement the search algorithm in such a way that we could store and reuse the results of all previously solved subformulas with a little overheads. ZQSAT can solve some sets of standard QBF benchmark problems (known to be hard for DPLL based algorithms) faster than the best existing solvers. In addition to prenex-CNF, ZQSAT accepts prenex-NNF formulas. We show and prove how this capability can be exponentially beneficial.
Virtual 3D city and landscape models are the main subject investigated in this thesis. They digitally represent urban space and have many applications in different domains, e.g., simulation, cadastral management, and city planning. Visualization is an elementary component of these applications. Photo-realistic visualization with an increasingly high degree of detail leads to fundamental problems for comprehensible visualization. A large number of highly detailed and textured objects within a virtual 3D city model may create visual noise and overload the users with information. Objects are subject to perspective foreshortening and may be occluded or not displayed in a meaningful way, as they are too small. In this thesis we present abstraction techniques that automatically process virtual 3D city and landscape models to derive abstracted representations. These have a reduced degree of detail, while essential characteristics are preserved. After introducing definitions for model, scale, and multi-scale representations, we discuss the fundamentals of map generalization as well as techniques for 3D generalization. The first presented technique is a cell-based generalization of virtual 3D city models. It creates abstract representations that have a highly reduced level of detail while maintaining essential structures, e.g., the infrastructure network, landmark buildings, and free spaces. The technique automatically partitions the input virtual 3D city model into cells based on the infrastructure network. The single building models contained in each cell are aggregated to abstracted cell blocks. Using weighted infrastructure elements, cell blocks can be computed on different hierarchical levels, storing the hierarchy relation between the cell blocks. Furthermore, we identify initial landmark buildings within a cell by comparing the properties of individual buildings with the aggregated properties of the cell. For each block, the identified landmark building models are subtracted using Boolean operations and integrated in a photo-realistic way. Finally, for the interactive 3D visualization we discuss the creation of the virtual 3D geometry and their appearance styling through colors, labeling, and transparency. We demonstrate the technique with example data sets. Additionally, we discuss applications of generalization lenses and transitions between abstract representations. The second technique is a real-time-rendering technique for geometric enhancement of landmark objects within a virtual 3D city model. Depending on the virtual camera distance, landmark objects are scaled to ensure their visibility within a specific distance interval while deforming their environment. First, in a preprocessing step a landmark hierarchy is computed, this is then used to derive distance intervals for the interactive rendering. At runtime, using the virtual camera distance, a scaling factor is computed and applied to each landmark. The scaling factor is interpolated smoothly at the interval boundaries using cubic Bézier splines. Non-landmark geometry that is near landmark objects is deformed with respect to a limited number of landmarks. We demonstrate the technique by applying it to a highly detailed virtual 3D city model and a generalized 3D city model. In addition we discuss an adaptation of the technique for non-linear projections and mobile devices. The third technique is a real-time rendering technique to create abstract 3D isocontour visualization of virtual 3D terrain models. The virtual 3D terrain model is visualized as a layered or stepped relief. The technique works without preprocessing and, as it is implemented using programmable graphics hardware, can be integrated with minimal changes into common terrain rendering techniques. Consequently, the computation is done in the rendering pipeline for each vertex, primitive, i.e., triangle, and fragment. For each vertex, the height is quantized to the nearest isovalue. For each triangle, the vertex configuration with respect to their isovalues is determined first. Using the configuration, the triangle is then subdivided. The subdivision forms a partial step geometry aligned with the triangle. For each fragment, the surface appearance is determined, e.g., depending on the surface texture, shading, and height-color-mapping. Flexible usage of the technique is demonstrated with applications from focus+context visualization, out-of-core terrain rendering, and information visualization. This thesis presents components for the creation of abstract representations of virtual 3D city and landscape models. Re-using visual language from cartography, the techniques enable users to build on their experience with maps when interpreting these representations. Simultaneously, characteristics of 3D geovirtual environments are taken into account by addressing and discussing, e.g., continuous scale, interaction, and perspective.
Zur Beherrschung großer Systeme, insbesondere zur Weitergabe und Nutzung von Erfahrungswissen in der frühen Entwurfs- und Planungsphase, benötigt man Abstraktionen für deren Strukturen. Trennt man Software- von Systemstrukturen, kann man mit letzteren Systeme auf ausreichend hohem Abstraktionsgrad beschreiben.Software-Patterns dienen dazu, Erfahrungswissen bezüglich programmierter Systeme strukturiert weiterzugeben. Dabei wird unterschieden zwischen Idiomen, die sich auf Lösungen mit einer bestimmten Programmiersprache beziehen, Design-Patterns, die nur einen kleinen Teil des Programms betreffen und Architektur-Patterns, deren Einfluss über einen größeren Teil oder gar das komplette Programm reicht. Eine Untersuchung von existierenden Patterns zeigt, dass deren Konzepte nützlich zum Finden von Systemstrukturen sind. Die grafische Darstellung dieser Patterns ist dagegen oft auf Software-Strukturen eingeschränkt und ist für die Vermittlung von Erfahrungen zum Finden von Systemstrukturen meist nicht geeignet. Daher wird die Kategorie der konzeptionellen Patterns mit einer darauf abgestimmten grafischen Darstellungsform vorgeschlagen, bei denen Problem und Lösungsvorschlag im Bereich der Systemstrukturen liegen. Sie betreffen informationelle Systeme, sind aber nicht auf Lösungen mit Software beschränkt. Die Systemstrukturen werden grafisch dargestellt, wobei dafür die Fundamental Modeling Concepts (FMC) verwendet werden, die zur Darstellung von Systemstrukturen entwickelt wurden.
Learning a model for the relationship between the attributes and the annotated labels of data examples serves two purposes. Firstly, it enables the prediction of the label for examples without annotation. Secondly, the parameters of the model can provide useful insights into the structure of the data. If the data has an inherent partitioned structure, it is natural to mirror this structure in the model. Such mixture models predict by combining the individual predictions generated by the mixture components which correspond to the partitions in the data. Often the partitioned structure is latent, and has to be inferred when learning the mixture model. Directly evaluating the accuracy of the inferred partition structure is, in many cases, impossible because the ground truth cannot be obtained for comparison. However it can be assessed indirectly by measuring the prediction accuracy of the mixture model that arises from it. This thesis addresses the interplay between the improvement of predictive accuracy by uncovering latent cluster structure in data, and further addresses the validation of the estimated structure by measuring the accuracy of the resulting predictive model. In the application of filtering unsolicited emails, the emails in the training set are latently clustered into advertisement campaigns. Uncovering this latent structure allows filtering of future emails with very low false positive rates. In order to model the cluster structure, a Bayesian clustering model for dependent binary features is developed in this thesis. Knowing the clustering of emails into campaigns can also aid in uncovering which emails have been sent on behalf of the same network of captured hosts, so-called botnets. This association of emails to networks is another layer of latent clustering. Uncovering this latent structure allows service providers to further increase the accuracy of email filtering and to effectively defend against distributed denial-of-service attacks. To this end, a discriminative clustering model is derived in this thesis that is based on the graph of observed emails. The partitionings inferred using this model are evaluated through their capacity to predict the campaigns of new emails. Furthermore, when classifying the content of emails, statistical information about the sending server can be valuable. Learning a model that is able to make use of it requires training data that includes server statistics. In order to also use training data where the server statistics are missing, a model that is a mixture over potentially all substitutions thereof is developed. Another application is to predict the navigation behavior of the users of a website. Here, there is no a priori partitioning of the users into clusters, but to understand different usage scenarios and design different layouts for them, imposing a partitioning is necessary. The presented approach simultaneously optimizes the discriminative as well as the predictive power of the clusters. Each model is evaluated on real-world data and compared to baseline methods. The results show that explicitly modeling the assumptions about the latent cluster structure leads to improved predictions compared to the baselines. It is beneficial to incorporate a small number of hyperparameters that can be tuned to yield the best predictions in cases where the prediction accuracy can not be optimized directly.
Independent component analysis (ICA) is a tool for statistical data analysis and signal processing that is able to decompose multivariate signals into their underlying source components. Although the classical ICA model is highly useful, there are many real-world applications that require powerful extensions of ICA. This thesis presents new methods that extend the functionality of ICA: (1) reliability and grouping of independent components with noise injection, (2) robust and overcomplete ICA with inlier detection, and (3) nonlinear ICA with kernel methods.
In the last decades, there was a notable progress in solving the well-known Boolean satisfiability (Sat) problem, which can be witnessed by powerful Sat solvers. One of the reasons why these solvers are so fast are structural properties of instances that are utilized by the solver’s interna. This thesis deals with the well-studied structural property treewidth, which measures the closeness of an instance to being a tree. In fact, there are many problems parameterized by treewidth that are solvable in polynomial time in the instance size when parameterized by treewidth.
In this work, we study advanced treewidth-based methods and tools for problems in knowledge representation and reasoning (KR). Thereby, we provide means to establish precise runtime results (upper bounds) for canonical problems relevant to KR. Then, we present a new type of problem reduction, which we call decomposition-guided (DG) that
allows us to precisely monitor the treewidth when reducing from one problem to another problem. This new reduction type will be the basis for a long-open lower bound result for quantified Boolean formulas and allows us to design a new methodology for establishing runtime lower bounds for problems parameterized by treewidth.
Finally, despite these lower bounds, we provide an efficient implementation of algorithms that adhere to treewidth. Our approach finds suitable abstractions of instances, which are subsequently refined in a recursive fashion, and it uses Sat solvers for solving subproblems. It turns out that our resulting solver is quite competitive for two canonical counting problems related to Sat.
3D from 2D touch
(2013)
While interaction with computers used to be dominated by mice and keyboards, new types of sensors now allow users to interact through touch, speech, or using their whole body in 3D space. These new interaction modalities are often referred to as "natural user interfaces" or "NUIs." While 2D NUIs have experienced major success on billions of mobile touch devices sold, 3D NUI systems have so far been unable to deliver a mobile form factor, mainly due to their use of cameras. The fact that cameras require a certain distance from the capture volume has prevented 3D NUI systems from reaching the flat form factor mobile users expect. In this dissertation, we address this issue by sensing 3D input using flat 2D sensors. The systems we present observe the input from 3D objects as 2D imprints upon physical contact. By sampling these imprints at very high resolutions, we obtain the objects' textures. In some cases, a texture uniquely identifies a biometric feature, such as the user's fingerprint. In other cases, an imprint stems from the user's clothing, such as when walking on multitouch floors. By analyzing from which part of the 3D object the 2D imprint results, we reconstruct the object's pose in 3D space. While our main contribution is a general approach to sensing 3D input on 2D sensors upon physical contact, we also demonstrate three applications of our approach. (1) We present high-accuracy touch devices that allow users to reliably touch targets that are a third of the size of those on current touch devices. We show that different users and 3D finger poses systematically affect touch sensing, which current devices perceive as random input noise. We introduce a model for touch that compensates for this systematic effect by deriving the 3D finger pose and the user's identity from each touch imprint. We then investigate this systematic effect in detail and explore how users conceptually touch targets. Our findings indicate that users aim by aligning visual features of their fingers with the target. We present a visual model for touch input that eliminates virtually all systematic effects on touch accuracy. (2) From each touch, we identify users biometrically by analyzing their fingerprints. Our prototype Fiberio integrates fingerprint scanning and a display into the same flat surface, solving a long-standing problem in human-computer interaction: secure authentication on touchscreens. Sensing 3D input and authenticating users upon touch allows Fiberio to implement a variety of applications that traditionally require the bulky setups of current 3D NUI systems. (3) To demonstrate the versatility of 3D reconstruction on larger touch surfaces, we present a high-resolution pressure-sensitive floor that resolves the texture of objects upon touch. Using the same principles as before, our system GravitySpace analyzes all imprints and identifies users based on their shoe soles, detects furniture, and enables accurate touch input using feet. By classifying all imprints, GravitySpace detects the users' body parts that are in contact with the floor and then reconstructs their 3D body poses using inverse kinematics. GravitySpace thus enables a range of applications for future 3D NUI systems based on a flat sensor, such as smart rooms in future homes. We conclude this dissertation by projecting into the future of mobile devices. Focusing on the mobility aspect of our work, we explore how NUI devices may one day augment users directly in the form of implanted devices.
This thesis discusses challenges in IT security education, points out a gap between e-learning and practical education, and presents a work to fill the gap. E-learning is a flexible and personalized alternative to traditional education. Nonetheless, existing e-learning systems for IT security education have difficulties in delivering hands-on experience because of the lack of proximity. Laboratory environments and practical exercises are indispensable instruction tools to IT security education, but security education in conventional computer laboratories poses particular problems such as immobility as well as high creation and maintenance costs. Hence, there is a need to effectively transform security laboratories and practical exercises into e-learning forms. In this thesis, we introduce the Tele-Lab IT-Security architecture that allows students not only to learn IT security principles, but also to gain hands-on security experience by exercises in an online laboratory environment. In this architecture, virtual machines are used to provide safe user work environments instead of real computers. Thus, traditional laboratory environments can be cloned onto the Internet by software, which increases accessibility to laboratory resources and greatly reduces investment and maintenance costs. Under the Tele-Lab IT-Security framework, a set of technical solutions is also proposed to provide effective functionalities, reliability, security, and performance. The virtual machines with appropriate resource allocation, software installation, and system configurations are used to build lightweight security laboratories on a hosting computer. Reliability and availability of laboratory platforms are covered by a virtual machine management framework. This management framework provides necessary monitoring and administration services to detect and recover critical failures of virtual machines at run time. Considering the risk that virtual machines can be misused for compromising production networks, we present a security management solution to prevent the misuse of laboratory resources by security isolation at the system and network levels. This work is an attempt to bridge the gap between e-learning/tele-teaching and practical IT security education. It is not to substitute conventional teaching in laboratories but to add practical features to e-learning. This thesis demonstrates the possibility to implement hands-on security laboratories on the Internet reliably, securely, and economically.
With increasing number of applications in Internet and mobile environments, distributed software systems are demanded to be more powerful and flexible, especially in terms of dynamism and security. This dissertation describes my work concerning three aspects: dynamic reconfiguration of component software, security control on middleware applications, and web services dynamic composition. Firstly, I proposed a technology named Routing Based Workflow (RBW) to model the execution and management of collaborative components and realize temporary binding for component instances. The temporary binding means component instances are temporarily loaded into a created execution environment to execute their functions, and then are released to their repository after executions. The temporary binding allows to create an idle execution environment for all collaborative components, on which the change operations can be immediately carried out. The changes on execution environment will result in a new collaboration of all involved components, and also greatly simplifies the classical issues arising from dynamic changes, such as consistency preserving etc. To demonstrate the feasibility of RBW, I created a dynamic secure middleware system - the Smart Data Server Version 3.0 (SDS3). In SDS3, an open source implementation of CORBA is adopted and modified as the communication infrastructure, and three secure components managed by RBW, are created to enhance the security on the access of deployed applications. SDS3 offers multi-level security control on its applications from strategy control to application-specific detail control. For the management by RBW, the strategy control of SDS3 applications could be dynamically changed by reorganizing the collaboration of the three secure components. In addition, I created the Dynamic Services Composer (DSC) based on Apache open source projects, Apache Axis and WSIF. In DSC, RBW is employed to model the interaction and collaboration of web services and to enable the dynamic changes on the flow structure of web services. Finally, overall performance tests were made to evaluate the efficiency of the developed RBW and SDS3. The results demonstrated that temporary binding of component instances makes slight impacts on the execution efficiency of components, and the blackout time arising from dynamic changes can be extremely reduced in any applications.
Die Projektierung und Abwicklung sowie die statische und dynamische Analyse von Geschäftsprozessen im Bereich des Verwaltens und Regierens auf kommunaler, Länder- wie auch Bundesebene mit Hilfe von Informations- und Kommunikationstechniken beschäftigen Politiker und Strategen für Informationstechnologie ebenso wie die Öffentlichkeit seit Langem. Der hieraus entstandene Begriff E-Government wurde in der Folge aus den unterschiedlichsten technischen, politischen und semantischen Blickrichtungen beleuchtet.
Die vorliegende Arbeit konzentriert sich dabei auf zwei Schwerpunktthemen:
> Das erste Schwerpunktthema behandelt den Entwurf eines hierarchischen Architekturmodells, für welches sieben hierarchische Schichten identifiziert werden können. Diese erscheinen notwendig, aber auch hinreichend, um den allgemeinen Fall zu beschreiben. Den Hintergrund hierfür liefert die langjährige Prozess- und Verwaltungserfahrung als Leiter der EDV-Abteilung der Stadtverwaltung Landshut, eine kreisfreie Stadt mit rund 69.000 Einwohnern im Nordosten von München. Sie steht als Repräsentant für viele Verwaltungsvorgänge in der Bundesrepublik Deutschland und ist dennoch als Analyseobjekt in der Gesamtkomplexität und Prozessquantität überschaubar. Somit können aus der Analyse sämtlicher Kernabläufe statische und dynamische Strukturen extrahiert und abstrakt modelliert werden. Die Schwerpunkte liegen in der Darstellung der vorhandenen Bedienabläufe in einer Kommune. Die Transformation der Bedienanforderung in einem hierarchischen System, die Darstellung der Kontroll- und der Operationszustände in allen Schichten wie auch die Strategie der Fehlererkennung und Fehlerbehebung schaffen eine transparente Basis für umfassende Restrukturierungen und Optimierungen. Für die Modellierung wurde FMC-eCS eingesetzt, eine am Hasso-Plattner-Institut für Softwaresystemtechnik GmbH (HPI) im Fachgebiet Kommunikationssysteme entwickelte Methodik zur Modellierung zustandsdiskreter Systeme unter Berücksichtigung möglicher Inkonsistenzen
>Das zweite Schwerpunktthema widmet sich der quantitativen Modellierung und Optimierung von E-Government-Bediensystemen, welche am Beispiel des Bürgerbüros der Stadt Landshut im Zeitraum 2008 bis 2015 durchgeführt wurden. Dies erfolgt auf Basis einer kontinuierlichen Betriebsdatenerfassung mit aufwendiger Vorverarbeitung zur Extrahierung mathematisch beschreibbarer Wahrscheinlichkeitsverteilungen. Der hieraus entwickelte Dienstplan wurde hinsichtlich der erzielbaren Optimierungen im dauerhaften Echteinsatz verifiziert.
This thesis presents methods for automated synthesis of flexible chip multiprocessor systems from parallel programs targeted at FPGAs to exploit both task-level parallelism and architecture customization. Automated synthesis is necessitated by the complexity of the design space. A detailed description of the design space is provided in order to determine which parameters should be modeled to facilitate automated synthesis by optimizing a cost function, the emphasis being placed on inclusive modeling of parameters from application, architectural and physical subspaces, as well as their joint coverage in order to avoid pre-constraining the design space. Given a parallel program and a set of an IP library, the automated synthesis problem is to simultaneously (i) select processors (ii) map and schedule tasks to them, and (iii) select one or several networks for inter-task communications such that design constraints and optimization objectives are met. The research objective in this thesis is to find a suitable model for automated synthesis, and to evaluate methods of using the model for architectural optimizations. Our contributions are a holistic approach for the design of such systems, corresponding models to facilitate automated synthesis, evaluation of optimization methods using state of the art integer linear and answer set programming, as well as the development of synthesis heuristics to solve runtime challenges.
The innovation of information techniques has changed many aspects of our life. In health care field, we can obtain, manage and communicate high-quality large volumetric image data by computer integrated devices, to support medical care. In this dissertation I propose several promising methods that could assist physicians in processing, observing and communicating the image data. They are included in my three research aspects: telemedicine integration, medical image visualization and image segmentation. And these methods are also demonstrated by the demo software that I developed. One of my research point focuses on medical information storage standard in telemedicine, for example DICOM, which is the predominant standard for the storage and communication of medical images. I propose a novel 3D image data storage method, which was lacking in current DICOM standard. I also created a mechanism to make use of the non-standard or private DICOM files. In this thesis I present several rendering techniques on medical image visualization to offer different display manners, both 2D and 3D, for example, cut through data volume in arbitrary degree, rendering the surface shell of the data, and rendering the semi-transparent volume of the data. A hybrid segmentation approach, designed for semi-automated segmentation of radiological image, such as CT, MRI, etc, is proposed in this thesis to get the organ or interested area from the image. This approach takes advantage of the region-based method and boundary-based methods. Three steps compose the hybrid approach: the first step gets coarse segmentation by fuzzy affinity and generates homogeneity operator; the second step divides the image by Voronoi Diagram and reclassifies the regions by the operator to refine segmentation from the previous step; the third step handles vague boundary by level set model. Topics for future research are mentioned in the end, including new supplement for DICOM standard for segmentation information storage, visualization of multimodal image information, and improvement of the segmentation approach to higher dimension.
Thema dieser Arbeit sind echtzeitfähige 3D-Renderingverfahren, die 3D-Geometrie mit über der Standarddarstellung hinausgehenden Qualitäts- und Gestaltungsmerkmalen rendern können. Beispiele sind Verfahren zur Darstellung von Schatten, Reflexionen oder Transparenz. Mit heutigen computergraphischen Software-Basissystemen ist ihre Integration in 3D-Anwendungssysteme sehr aufwändig: Dies liegt einerseits an der technischen, algorithmischen Komplexität der Einzelverfahren, andererseits an Ressourcenkonflikten und Seiteneffekten bei der Kombination mehrerer Verfahren. Szenengraphsysteme, intendiert als computergraphische Softwareschicht zur Abstraktion von der Graphikhardware, stellen derzeit keine Mechanismen zur Nutzung dieser Renderingverfahren zur Verfügung. Ziel dieser Arbeit ist es, eine Software-Architektur für ein Szenengraphsystem zu konzipieren und umzusetzen, die echtzeitfähige 3D-Renderingverfahren als Komponenten modelliert und es damit erlaubt, diese Verfahren innerhalb des Szenengraphsystems für die Anwendungsentwicklung effektiv zu nutzen. Ein Entwickler, der ein solches Szenengraphsystem nutzt, steuert diese Komponenten durch Elemente in der Szenenbeschreibung an, die die sichtbare Wirkung eines Renderingverfahrens auf die Geometrie in der Szene angeben, aber keine Hinweise auf die algorithmische Implementierung des Verfahrens enthalten. Damit werden Renderingverfahren in 3D-Anwendungssystemen nutzbar, ohne dass ein Entwickler detaillierte Kenntnisse über sie benötigt, so dass der Aufwand für ihre Entwicklung drastisch reduziert wird. Ein besonderer Augenmerk der Arbeit liegt darauf, auf diese Weise auch verschiedene Renderingverfahren in einer Szene kombiniert einsetzen zu können. Hierzu ist eine Unterteilung der Renderingverfahren in mehrere Kategorien erforderlich, die mit Hilfe unterschiedlicher Ansätze ausgewertet werden. Dies erlaubt die Abstimmung verschiedener Komponenten für Renderingverfahren und ihrer verwendeten Ressourcen. Die Zusammenarbeit mehrerer Renderingverfahren hat dort ihre Grenzen, wo die Kombination von Renderingverfahren graphisch nicht sinnvoll ist oder fundamentale technische Beschränkungen der Verfahren eine gleichzeitige Verwendung unmöglich machen. Die in dieser Arbeit vorgestellte Software-Architektur kann diese Grenzen nicht verschieben, aber sie ermöglicht den gleichzeitigen Einsatz vieler Verfahren, bei denen eine Kombination aufgrund der hohen Komplexität der Implementierung bislang nicht erreicht wurde. Das Vermögen zur Zusammenarbeit ist dabei allerdings von der Art eines Einzelverfahrens abhängig: Verfahren zur Darstellung transparenter Geometrie beispielsweise erfordern bei der Kombination mit anderen Verfahren in der Regel vollständig neuentwickelte Renderingverfahren; entsprechende Komponenten für das Szenengraphsystem können daher nur eingeschränkt mit Komponenten für andere Renderingverfahren verwendet werden. Das in dieser Arbeit entwickelte System integriert und kombiniert Verfahren zur Darstellung von Bumpmapping, verschiedene Schatten- und Reflexionsverfahren sowie bildbasiertes CSG-Rendering. Damit stehen wesentliche Renderingverfahren in einem Szenengraphsystem erstmalig komponentenbasiert und auf einem hohen Abstraktionsniveau zur Verfügung. Das System ist trotz des zusätzlichen Verwaltungsaufwandes in der Lage, die Renderingverfahren einzeln und in Kombination grundsätzlich in Echtzeit auszuführen.
The modeling and evaluation calculus FMC-QE, the Fundamental Modeling Concepts for Quanti-tative Evaluation [1], extends the Fundamental Modeling Concepts (FMC) for performance modeling and prediction. In this new methodology, the hierarchical service requests are in the main focus, because they are the origin of every service provisioning process. Similar to physics, these service requests are a tuple of value and unit, which enables hierarchical service request transformations at the hierarchical borders and therefore the hierarchical modeling. Through reducing the model complexity of the models by decomposing the system in different hierarchical views, the distinction between operational and control states and the calculation of the performance values on the assumption of the steady state, FMC-QE has a scalable applica-bility on complex systems. According to FMC, the system is modeled in a 3-dimensional hierarchical representation space, where system performance parameters are described in three arbitrarily fine-grained hierarchi-cal bipartite diagrams. The hierarchical service request structures are modeled in Entity Relationship Diagrams. The static server structures, divided into logical and real servers, are de-scribed as Block Diagrams. The dynamic behavior and the control structures are specified as Petri Nets, more precisely Colored Time Augmented Petri Nets. From the structures and pa-rameters of the performance model, a hierarchical set of equations is derived. The calculation of the performance values is done on the assumption of stationary processes and is based on fundamental laws of the performance analysis: Little's Law and the Forced Traffic Flow Law. Little's Law is used within the different hierarchical levels (horizontal) and the Forced Traffic Flow Law is the key to the dependencies among the hierarchical levels (vertical). This calculation is suitable for complex models and allows a fast (re-)calculation of different performance scenarios in order to support development and configuration decisions. Within the Research Group Zorn at the Hasso Plattner Institute, the work is embedded in a broader research in the development of FMC-QE. While this work is concentrated on the theoretical background, description and definition of the methodology as well as the extension and validation of the applicability, other topics are in the development of an FMC-QE modeling and evaluation tool and the usage of FMC-QE in the design of an adaptive transport layer in order to fulfill Quality of Service and Service Level Agreements in volatile service based environments. This thesis contains a state-of-the-art, the description of FMC-QE as well as extensions of FMC-QE in representative general models and case studies. In the state-of-the-art part of the thesis in chapter 2, an overview on existing Queueing Theory and Time Augmented Petri Net models and other quantitative modeling and evaluation languages and methodologies is given. Also other hierarchical quantitative modeling frameworks will be considered. The description of FMC-QE in chapter 3 consists of a summary of the foundations of FMC-QE, basic definitions, the graphical notations, the FMC-QE Calculus and the modeling of open queueing networks as an introductory example. The extensions of FMC-QE in chapter 4 consist of the integration of the summation method in order to support the handling of closed networks and the modeling of multiclass and semaphore scenarios. Furthermore, FMC-QE is compared to other performance modeling and evaluation approaches. In the case study part in chapter 5, proof-of-concept examples, like the modeling of a service based search portal, a service based SAP NetWeaver application and the Axis2 Web service framework will be provided. Finally, conclusions are given by a summary of contributions and an outlook on future work in chapter 6. [1] Werner Zorn. FMC-QE - A New Approach in Quantitative Modeling. In Hamid R. Arabnia, editor, Procee-dings of the International Conference on Modeling, Simulation and Visualization Methods (MSV 2007) within WorldComp ’07, pages 280 – 287, Las Vegas, NV, USA, June 2007. CSREA Press. ISBN 1-60132-029-9.
Interaktive System sind dynamische Systeme mit einem zumeist informationellen Kern, die über eine Benutzungsschnittstelle von einem oder mehreren Benutzern bedient werden können. Grundlage für die Benutzung interaktiver Systeme ist das Verständnis von Zweck und Funktionsweise. Allein aus Form und Gestalt der Benutzungsschnittstelle ergibt sich ein solches Verständnis nur in einfachen Fällen. Mit steigender Komplexität ist daher eine verständliche Beschreibung solcher Systeme für deren Entwicklung und Benutzung unverzichtbar. Abhängig von ihrem Zweck variieren die Formen vorgefundener Beschreibungen in der Literatur sehr stark. Ausschlaggebend für die Verständlichkeit einer Beschreibung ist jedoch primär die ihr zugrundeliegende Begriffswelt. Zur Beschreibung allgemeiner komplexer diskreter Systeme - aufbauend auf einer getrennten Betrachtung von Aufbau-, Ablauf- und Wertestrukturen - existiert eine bewährte Begriffswelt. Eine Spezialisierung dieser Begriffs- und Vorstellungswelt, die den unterschiedlichen Betrachtungsebenen interaktiver Systeme gerecht wird und die als Grundlage beliebiger Beschreibungsansätze interaktiver Systeme dienen kann, gibt es bisher nicht. Ziel dieser Arbeit ist die Bereitstellung einer solchen Begriffswelt zur effizienten Kommunikation der Strukturen interaktiver Systeme. Dadurch soll die Grundlage für eine sinnvolle Ergänzung bestehender Beschreibungs- und Entwicklungsansätze geschaffen werden. Prinzipien der Gestaltung von Benutzungsschnittstellen, Usability- oder Ergonomiebetrachtungen stehen nicht im Mittelpunkt der Arbeit. Ausgehend von der informationellen Komponente einer Benutzungsschnittstelle werden drei Modellebenen abgegrenzt, die bei der Betrachtung eines interaktiven Systems zu unterscheiden sind. Jede Modellebene ist durch eine typische Begriffswelt gekennzeichnet, die ihren Ursprung in einer aufbauverwurzelten Vorstellung hat. Der durchgängige Bezug auf eine Systemvorstellung unterscheidet diesen Ansatz von dem bereits bekannten Konzept der Abgrenzung unterschiedlicher Ebenen verschiedenartiger Entwurfsentscheidungen. Die Fundamental Modeling Concepts (FMC) bilden dabei die Grundlage für die Findung und die Darstellung von Systemstrukturen. Anhand bestehender Systembeschreibungen wird gezeigt, wie die vorgestellte Begriffswelt zur Modellfindung genutzt werden kann. Dazu wird eine repräsentative Auswahl vorgefundener Systembeschreibungen aus der einschlägigen Literatur daraufhin untersucht, in welchem Umfang durch sie die Vorstellungswelt dynamischer Systeme zum Ausdruck kommt. Defizite in der ursprünglichen Darstellung werden identifiziert. Anhand von Alternativmodellen zu den betrachteten Systemen wird der Nutzen der vorgestellten Begriffswelt und Darstellungsweise demonstriert.
Answer Set Programming (ASP) emerged in the late 1990s as a new logic programming paradigm, having its roots in nonmonotonic reasoning, deductive databases, and logic programming with negation as failure. The basic idea of ASP is to represent a computational problem as a logic program whose answer sets correspond to solutions, and then to use an answer set solver for finding answer sets of the program. ASP is particularly suited for solving NP-complete search problems. Among these, we find applications to product configuration, diagnosis, and graph-theoretical problems, e.g. finding Hamiltonian cycles. On different lines of ASP research, many extensions of the basic formalism have been proposed. The most intensively studied one is the modelling of preferences in ASP. They constitute a natural and effective way of selecting preferred solutions among a plethora of solutions for a problem. For example, preferences have been successfully used for timetabling, auctioning, and product configuration. In this thesis, we concentrate on preferences within answer set programming. Among several formalisms and semantics for preference handling in ASP, we concentrate on ordered logic programs with the underlying D-, W-, and B-semantics. In this setting, preferences are defined among rules of a logic program. They select preferred answer sets among (standard) answer sets of the underlying logic program. Up to now, those preferred answer sets have been computed either via a compilation method or by meta-interpretation. Hence, the question comes up, whether and how preferences can be integrated into an existing ASP solver. To solve this question, we develop an operational graph-based framework for the computation of answer sets of logic programs. Then, we integrate preferences into this operational approach. We empirically observe that our integrative approach performs in most cases better than the compilation method or meta-interpretation. Another research issue in ASP are optimization methods that remove redundancies, as also found in database query optimizers. For these purposes, the rather recently suggested notion of strong equivalence for ASP can be used. If a program is strongly equivalent to a subprogram of itself, then one can always use the subprogram instead of the original program, a technique which serves as an effective optimization method. Up to now, strong equivalence has not been considered for logic programs with preferences. In this thesis, we tackle this issue and generalize the notion of strong equivalence to ordered logic programs. We give necessary and sufficient conditions for the strong equivalence of two ordered logic programs. Furthermore, we provide program transformations for ordered logic programs and show in how far preferences can be simplified. Finally, we present two new applications for preferences within answer set programming. First, we define new procedures for group decision making, which we apply to the problem of scheduling a group meeting. As a second new application, we reconstruct a linguistic problem appearing in German dialects within ASP. Regarding linguistic studies, there is an ongoing debate about how unique the rule systems of language are in human cognition. The reconstruction of grammatical regularities with tools from computer science has consequences for this debate: if grammars can be modelled this way, then they share core properties with other non-linguistic rule systems.
In the early days of computer graphics, research was mainly driven by the goal to create realistic synthetic imagery. By contrast, non-photorealistic computer graphics, established as its own branch of computer graphics in the early 1990s, is mainly motivated by concepts and principles found in traditional art forms, such as painting, illustration, and graphic design, and it investigates concepts and techniques that abstract from reality using expressive, stylized, or illustrative rendering techniques. This thesis focuses on the artistic stylization of two-dimensional content and presents several novel automatic techniques for the creation of simplified stylistic illustrations from color images, video, and 3D renderings. Primary innovation of these novel techniques is that they utilize the smooth structure tensor as a simple and efficient way to obtain information about the local structure of an image. More specifically, this thesis contributes to knowledge in this field in the following ways. First, a comprehensive review of the structure tensor is provided. In particular, different methods for integrating the minor eigenvector field of the smoothed structure tensor are developed, and the superiority of the smoothed structure tensor over the popular edge tangent flow is demonstrated. Second, separable implementations of the popular bilateral and difference of Gaussians filters that adapt to the local structure are presented. These filters avoid artifacts while being computationally highly efficient. Taken together, both provide an effective way to create a cartoon-style effect. Third, a generalization of the Kuwahara filter is presented that avoids artifacts by adapting the shape, scale, and orientation of the filter to the local structure. This causes directional image features to be better preserved and emphasized, resulting in overall sharper edges and a more feature-abiding painterly effect. In addition to the single-scale variant, a multi-scale variant is presented, which is capable of performing a highly aggressive abstraction. Fourth, a technique that builds upon the idea of combining flow-guided smoothing with shock filtering is presented, allowing for an aggressive exaggeration and an emphasis of directional image features. All presented techniques are suitable for temporally coherent per-frame filtering of video or dynamic 3D renderings, without requiring expensive extra processing, such as optical flow. Moreover, they can be efficiently implemented to process content in real-time on a GPU.
E-Learning-Anwendungen bieten Chancen für die gesetzlich vorgeschriebene Inklusion von Lernenden mit Beeinträchtigungen. Die gleichberechtigte Teilhabe von blinden Lernenden an Veranstaltungen in virtuellen Klassenzimmern ist jedoch durch den synchronen, multimedialen Charakter und den hohen Informationsumfang dieser Lösungen kaum möglich.
Die vorliegende Arbeit untersucht die Zugänglichkeit virtueller Klassenzimmer für blinde Nutzende, um eine möglichst gleichberechtigte Teilhabe an synchronen, kollaborativen Lernszenarien zu ermöglichen. Im Rahmen einer Produktanalyse werden dazu virtuelle Klassenzimmer auf ihre Zugänglichkeit und bestehende Barrieren untersucht und Richtlinien für die zugängliche Gestaltung von virtuellen Klassenzimmern definiert. Anschließend wird ein alternatives Benutzungskonzept zur Darstellung und Bedienung virtueller Klassenzimmer auf einem zweidimensionalen taktilen Braille-Display entwickelt, um eine möglichst gleichberechtigte Teilhabe blinder Lernender an synchronen Lehrveranstaltungen zu ermöglichen. Nach einer ersten Evaluation mit blinden Probanden erfolgt die prototypische Umsetzung des Benutzungskonzepts für ein Open-Source-Klassenzimmer. Die abschließende Evaluation der prototypischen Umsetzung zeigt die Verbesserung der Zugänglichkeit von virtuellen Klassenzimmern für blinde Lernende unter Verwendung eines taktilen Flächendisplays und bestätigt die Wirksamkeit der im Rahmen dieser Arbeit entwickelten Konzepte.
In recent years, there has been a dramatic increase in available compute capacities. However, these “Grid resources” are rarely accessible in a continuous stream, but rather appear scattered across various machine types, platforms and operating systems, which are coupled by networks of fluctuating bandwidth. It becomes increasingly difficult for scientists to exploit available resources for their applications. We believe that intelligent, self-governing applications should be able to select resources in a dynamic and heterogeneous environment: Migrating applications determine a resource when old capacities are used up. Spawning simulations launch algorithms on external machines to speed up the main execution. Applications are restarted as soon as a failure is detected. All these actions can be taken without human interaction. A distributed compute environment possesses an intrinsic unreliability. Any application that interacts with such an environment must be able to cope with its failing components: deteriorating networks, crashing machines, failing software. We construct a reliable service infrastructure by endowing a service environment with a peer-to-peer topology. This “Grid Peer Services” infrastructure accommodates high-level services like migration and spawning, as well as fundamental services for application launching, file transfer and resource selection. It utilizes existing Grid technology wherever possible to accomplish its tasks. An Application Information Server acts as a generic information registry to all participants in a service environment. The service environment that we developed, allows applications e.g. to send a relocation requests to a migration server. The server selects a new computer based on the transmitted resource requirements. It transfers the application's checkpoint and binary to the new host and resumes the simulation. Although the Grid's underlying resource substrate is not continuous, we achieve persistent computations on Grids by relocating the application. We show with our real-world examples that a traditional genome analysis program can be easily modified to perform self-determined migrations in this service environment.
Although educational content in electronic form is increasing dramatically, its usage in an educational environment is poor, mainly due to the fact that there is too much of (unreliable) redundant, and not relevant information. Finding appropriate answers is a rather difficult task being reliant on the user filtering of the pertinent information from the noise. Turning knowledge bases like the online tele-TASK archive into useful educational resources requires identifying correct, reliable, and "machine-understandable" information, as well as developing simple but efficient search tools with the ability to reason over this information. Our vision is to create an E-Librarian Service, which is able to retrieve multimedia resources from a knowledge base in a more efficient way than by browsing through an index, or by using a simple keyword search. In our E-Librarian Service, the user can enter his question in a very simple and human way; in natural language (NL). Our premise is that more pertinent results would be retrieved if the search engine understood the sense of the user's query. The returned results are then logical consequences of an inference rather than of keyword matchings. Our E-Librarian Service does not return the answer to the user's question, but it retrieves the most pertinent document(s), in which the user finds the answer to his/her question. Among all the documents that have some common information with the user query, our E-Librarian Service identifies the most pertinent match(es), keeping in mind that the user expects an exhaustive answer while preferring a concise answer with only little or no information overhead. Also, our E-Librarian Service always proposes a solution to the user, even if the system concludes that there is no exhaustive answer. Our E-Librarian Service was implemented prototypically in three different educational tools. A first prototype is CHESt (Computer History Expert System); it has a knowledge base with 300 multimedia clips that cover the main events in computer history. A second prototype is MatES (Mathematics Expert System); it has a knowledge base with 115 clips that cover the topic of fractions in mathematics for secondary school w.r.t. the official school programme. All clips were recorded mainly by pupils. The third and most advanced prototype is the "Lecture Butler's E-Librarain Service"; it has a Web service interface to respect a service oriented architecture (SOA), and was developed in the context of the Web-University project at the Hasso-Plattner-Institute (HPI). Two major experiments in an educational environment - at the Lycée Technique Esch/Alzette in Luxembourg - were made to test the pertinence and reliability of our E-Librarian Service as a complement to traditional courses. The first experiment (in 2005) was made with CHESt in different classes, and covered a single lesson. The second experiment (in 2006) covered a period of 6 weeks of intensive use of MatES in one class. There was no classical mathematics lesson where the teacher gave explanations, but the students had to learn in an autonomous and exploratory way. They had to ask questions to the E-Librarian Service just the way they would if there was a human teacher.
Boolean constraint solving technology has made tremendous progress over the last decade, leading to industrial-strength solvers, for example, in the areas of answer set programming (ASP), the constraint satisfaction problem (CSP), propositional satisfiability (SAT) and satisfiability of quantified Boolean formulas (QBF). However, in all these areas, there exist multiple solving strategies that work well on different applications; no strategy dominates all other strategies. Therefore, no individual solver shows robust state-of-the-art performance in all kinds of applications. Additionally, the question arises how to choose a well-performing solving strategy for a given application; this is a challenging question even for solver and domain experts. One way to address this issue is the use of portfolio solvers, that is, a set of different solvers or solver configurations. We present three new automatic portfolio methods: (i) automatic construction of parallel portfolio solvers (ACPP) via algorithm configuration,(ii) solving the $NP$-hard problem of finding effective algorithm schedules with Answer Set Programming (aspeed), and (iii) a flexible algorithm selection framework (claspfolio2) allowing for fair comparison of different selection approaches. All three methods show improved performance and robustness in comparison to individual solvers on heterogeneous instance sets from many different applications. Since parallel solvers are important to effectively solve hard problems on parallel computation systems (e.g., multi-core processors), we extend all three approaches to be effectively applicable in parallel settings. We conducted extensive experimental studies different instance sets from ASP, CSP, MAXSAT, Operation Research (OR), SAT and QBF that indicate an improvement in the state-of-the-art solving heterogeneous instance sets. Last but not least, from our experimental studies, we deduce practical advice regarding the question when to apply which of our methods.
Im Mittelpunkt dieser Arbeit stehen virtuelle 3D-Stadtmodelle, die Objekte, Phänomene und Prozesse in urbanen Räumen in digitaler Form repräsentieren. Sie haben sich zu einem Kernthema von Geoinformationssystemen entwickelt und bilden einen zentralen Bestandteil geovirtueller 3D-Welten. Virtuelle 3D-Stadtmodelle finden nicht nur Verwendung als Mittel für Experten in Bereichen wie Stadtplanung, Funknetzplanung, oder Lärmanalyse, sondern auch für allgemeine Nutzer, die realitätsnah dargestellte virtuelle Städte in Bereichen wie Bürgerbeteiligung, Tourismus oder Unterhaltung nutzen und z. B. in Anwendungen wie GoogleEarth eine räumliche Umgebung intuitiv erkunden und durch eigene 3D-Modelle oder zusätzliche Informationen erweitern. Die Erzeugung und Darstellung virtueller 3D-Stadtmodelle besteht aus einer Vielzahl von Prozessschritten, von denen in der vorliegenden Arbeit zwei näher betrachtet werden: Texturierung und Visualisierung. Im Bereich der Texturierung werden Konzepte und Verfahren zur automatischen Ableitung von Fototexturen aus georeferenzierten Schrägluftbildern sowie zur Speicherung oberflächengebundener Daten in virtuellen 3D-Stadtmodellen entwickelt. Im Bereich der Visualisierung werden Konzepte und Verfahren für die multiperspektivische Darstellung sowie für die hochqualitative Darstellung nichtlinearer Projektionen virtueller 3D-Stadtmodelle in interaktiven Systemen vorgestellt. Die automatische Ableitung von Fototexturen aus georeferenzierten Schrägluftbildern ermöglicht die Veredelung vorliegender virtueller 3D-Stadtmodelle. Schrägluftbilder bieten sich zur Texturierung an, da sie einen Großteil der Oberflächen einer Stadt, insbesondere Gebäudefassaden, mit hoher Redundanz erfassen. Das Verfahren extrahiert aus dem verfügbaren Bildmaterial alle Ansichten einer Oberfläche und fügt diese pixelpräzise zu einer Textur zusammen. Durch Anwendung auf alle Oberflächen wird das virtuelle 3D-Stadtmodell flächendeckend texturiert. Der beschriebene Ansatz wurde am Beispiel des offiziellen Berliner 3D-Stadtmodells sowie der in GoogleEarth integrierten Innenstadt von München erprobt. Die Speicherung oberflächengebundener Daten, zu denen auch Texturen zählen, wurde im Kontext von CityGML, einem international standardisierten Datenmodell und Austauschformat für virtuelle 3D-Stadtmodelle, untersucht. Es wird ein Datenmodell auf Basis computergrafischer Konzepte entworfen und in den CityGML-Standard integriert. Dieses Datenmodell richtet sich dabei an praktischen Anwendungsfällen aus und lässt sich domänenübergreifend verwenden. Die interaktive multiperspektivische Darstellung virtueller 3D-Stadtmodelle ergänzt die gewohnte perspektivische Darstellung nahtlos um eine zweite Perspektive mit dem Ziel, den Informationsgehalt der Darstellung zu erhöhen. Diese Art der Darstellung ist durch die Panoramakarten von H. C. Berann inspiriert; Hauptproblem ist die Übertragung des multiperspektivischen Prinzips auf ein interaktives System. Die Arbeit stellt eine technische Umsetzung dieser Darstellung für 3D-Grafikhardware vor und demonstriert die Erweiterung von Vogel- und Fußgängerperspektive. Die hochqualitative Darstellung nichtlinearer Projektionen beschreibt deren Umsetzung auf 3D-Grafikhardware, wobei neben der Bildwiederholrate die Bildqualität das wesentliche Entwicklungskriterium ist. Insbesondere erlauben die beiden vorgestellten Verfahren, dynamische Geometrieverfeinerung und stückweise perspektivische Projektionen, die uneingeschränkte Nutzung aller hardwareseitig verfügbaren, qualitätssteigernden Funktionen wie z.~B. Bildraumgradienten oder anisotroper Texturfilterung. Beide Verfahren sind generisch und unterstützen verschiedene Projektionstypen. Sie ermöglichen die anpassungsfreie Verwendung gängiger computergrafischer Effekte wie Stilisierungsverfahren oder prozeduraler Texturen für nichtlineare Projektionen bei optimaler Bildqualität. Die vorliegende Arbeit beschreibt wesentliche Technologien für die Verarbeitung virtueller 3D-Stadtmodelle: Zum einen lassen sich mit den Ergebnissen der Arbeit Texturen für virtuelle 3D-Stadtmodelle automatisiert herstellen und als eigenständige Attribute in das virtuelle 3D-Stadtmodell einfügen. Somit trägt diese Arbeit dazu bei, die Herstellung und Fortführung texturierter virtueller 3D-Stadtmodelle zu verbessern. Zum anderen zeigt die Arbeit Varianten und technische Lösungen für neuartige Projektionstypen für virtueller 3D-Stadtmodelle in interaktiven Visualisierungen. Solche nichtlinearen Projektionen stellen Schlüsselbausteine dar, um neuartige Benutzungsschnittstellen für und Interaktionsformen mit virtuellen 3D-Stadtmodellen zu ermöglichen, insbesondere für mobile Geräte und immersive Umgebungen.
The constantly growing capacity of reconfigurable devices allows simultaneous execution of complex applications on those devices. The mere diversity of applications deems it impossible to design an interconnection network matching the requirements of every possible application perfectly, leading to suboptimal performance in many cases. However, the architecture of the interconnection network is not the only aspect affecting performance of communication. The resource manager places applications on the device and therefore influences latency between communicating partners and overall network load. Communication protocols affect performance by introducing data and processing overhead putting higher load on the network and increasing resource demand. Approaching communication holistically not only considers the architecture of the interconnect, but communication-aware resource management, communication protocols and resource usage just as well. Incorporation of different parts of a reconfigurable system during design- and runtime and optimizing them with respect to communication demand results in more resource efficient communication. Extensive evaluation shows enhanced performance and flexibility, if communication on reconfigurable devices is regarded in a holistic fashion.
Discriminative Models for Biometric Identification using Micro- and Macro-Movements of the Eyes
(2021)
Human visual perception is an active process. Eye movements either alternate between fixations and saccades or follow a smooth pursuit movement in case of moving targets. Besides these macroscopic gaze patterns, the eyes perform involuntary micro-movements during fixations which are commonly categorized into micro-saccades, drift and tremor. Eye movements are frequently studied in cognitive psychology, because they reflect a complex interplay of perception, attention and oculomotor control.
A common insight of psychological research is that macro-movements are highly individual. Inspired by this finding, there has been a considerable amount of prior research on oculomotoric biometric identification. However, the accuracy of known approaches is too low and the time needed for identification is too long for any practical application. This thesis explores discriminative models for the task of biometric identification.
Discriminative models optimize a quality measure of the predictions and are usually superior to generative approaches in discriminative tasks. However, using discriminative models requires to select a suitable form of data representation for sequential eye gaze data; i.e., by engineering features or constructing a sequence kernel and the performance of the classification model strongly depends on the data representation. We study two fundamentally different ways of representing eye gaze within a discriminative framework. In the first part of this thesis, we explore the integration of data and psychological background knowledge in the form of generative models to construct representations. To this end, we first develop generative statistical models of gaze behavior during reading and scene viewing that account for viewer-specific distributional properties of gaze patterns. In a second step, we develop a discriminative identification model by deriving Fisher kernel functions from these and several baseline models. We find that an SVM with Fisher kernel is able to reliably identify users based on their eye gaze during reading and scene viewing. However, since the generative models are constrained to use low-frequency macro-movements, they discard a significant amount of information contained in the raw eye tracking signal at a high cost: identification requires about one minute of input recording, which makes it inapplicable for real world biometric systems. In the second part of this thesis, we study a purely data-driven modeling approach. Here, we aim at automatically discovering the individual pattern hidden in the raw eye tracking signal. To this end, we develop a deep convolutional neural network DeepEyedentification that processes yaw and pitch gaze velocities and learns a representation end-to-end. Compared to prior work, this model increases the identification accuracy by one order of magnitude and the time to identification decreases to only seconds. The DeepEyedentificationLive model further improves upon the identification performance by processing binocular input and it also detects presentation-attacks.
We find that by learning a representation, the performance of oculomotoric identification and presentation-attack detection can be driven close to practical relevance for biometric applications. Eye tracking devices with high sampling frequency and precision are expensive and the applicability of eye movement as a biometric feature heavily depends on cost of recording devices.
In the last part of this thesis, we therefore study the requirements on data quality by evaluating the performance of the DeepEyedentificationLive network under reduced spatial and temporal resolution. We find that the method still attains a high identification accuracy at a temporal resolution of only 250 Hz and a precision of 0.03 degrees. Reducing both does not have an additive deteriorating effect.
Service-oriented Architectures (SOA) facilitate the provision and orchestration of business services to enable a faster adoption to changing business demands. Web Services provide a technical foundation to implement this paradigm on the basis of XML-messaging. However, the enhanced flexibility of message-based systems comes along with new threats and risks. To face these issues, a variety of security mechanisms and approaches is supported by the Web Service specifications. The usage of these security mechanisms and protocols is configured by stating security requirements in security policies. However, security policy languages for SOA are complex and difficult to create due to the expressiveness of these languages. To facilitate and simplify the creation of security policies, this thesis presents a model-driven approach that enables the generation of complex security policies on the basis of simple security intentions. SOA architects can specify these intentions in system design models and are not required to deal with complex technical security concepts. The approach introduced in this thesis enables the enhancement of any system design modelling languages – for example FMC or BPMN – with security modelling elements. The syntax, semantics, and notion of these elements is defined by our security modelling language SecureSOA. The metamodel of this language provides extension points to enable the integration into system design modelling languages. In particular, this thesis demonstrates the enhancement of FMC block diagrams with SecureSOA. To enable the model-driven generation of security policies, a domain-independent policy model is introduced in this thesis. This model provides an abstraction layer for security policies. Mappings are used to perform the transformation from our model to security policy languages. However, expert knowledge is required to generate instances of this model on the basis of simple security intentions. Appropriate security mechanisms, protocols and options must be chosen and combined to fulfil these security intentions. In this thesis, a formalised system of security patterns is used to represent this knowledge and to enable an automated transformation process. Moreover, a domain-specific language is introduced to state security patterns in an accessible way. On the basis of this language, a system of security configuration patterns is provided to transform security intentions related to data protection and identity management. The formal semantics of the security pattern language enable the verification of the transformation process introduced in this thesis and prove the correctness of the pattern application. Finally, our SOA Security LAB is presented that demonstrates the application of our model-driven approach to facilitate a dynamic creation, configuration, and execution of secure Web Service-based composed applications.
Die Dissertation stellt eine neue Herangehensweise an die Lösung der Aufgabe der funktionalen Diagnostik digitaler Systeme vor. In dieser Arbeit wird eine neue Methode für die Fehlererkennung vorgeschlagen, basierend auf der Logischen Ergänzung und der Verwendung von Berger-Codes und dem 1-aus-3 Code. Die neue Fehlererkennungsmethode der Logischen Ergänzung gestattet einen hohen Optimierungsgrad der benötigten Realisationsfläche der konstruierten Fehlererkennungsschaltungen. Außerdem ist eins der wichtigen in dieser Dissertation gelösten Probleme die Synthese vollständig selbstprüfender Schaltungen.
Personal fabrication tools, such as 3D printers, are on the way of enabling a future in which non-technical users will be able to create custom objects. However, while the hardware is there, the current interaction model behind existing design tools is not suitable for non-technical users. Today, 3D printers are operated by fabricating the object in one go, which tends to take overnight due to the slow 3D printing technology. Consequently, the current interaction model requires users to think carefully before printing as every mistake may imply another overnight print. Planning every step ahead, however, is not feasible for non-technical users as they lack the experience to reason about the consequences of their design decisions.
In this dissertation, we propose changing the interaction model around personal fabrication tools to better serve this user group. We draw inspiration from personal computing and argue that the evolution of personal fabrication may resemble the evolution of personal computing: Computing started with machines that executed a program in one go before returning the result to the user. By decreasing the interaction unit to single requests, turn-taking systems such as the command line evolved, which provided users with feedback after every input. Finally, with the introduction of direct-manipulation interfaces, users continuously interacted with a program receiving feedback about every action in real-time. In this dissertation, we explore whether these interaction concepts can be applied to personal fabrication as well.
We start with fabricating an object in one go and investigate how to tighten the feedback-cycle on an object-level: We contribute a method called low-fidelity fabrication, which saves up to 90% fabrication time by creating objects as fast low-fidelity previews, which are sufficient to evaluate key design aspects. Depending on what is currently being tested, we propose different conversions that enable users to focus on different parts: faBrickator allows for a modular design in the early stages of prototyping; when users move on WirePrint allows quickly testing an object's shape, while Platener allows testing an object's technical function. We present an interactive editor for each technique and explain the underlying conversion algorithms.
By interacting on smaller units, such as a single element of an object, we explore what it means to transition from systems that fabricate objects in one go to turn-taking systems. We start with a 2D system called constructable: Users draw with a laser pointer onto the workpiece inside a laser cutter. The drawing is captured with an overhead camera. As soon as the the user finishes drawing an element, such as a line, the constructable system beautifies the path and cuts it--resulting in physical output after every editing step. We extend constructable towards 3D editing by developing a novel laser-cutting technique for 3D objects called LaserOrigami that works by heating up the workpiece with the defocused laser until the material becomes compliant and bends down under gravity. While constructable and LaserOrigami allow for fast physical feedback, the interaction is still best described as turn-taking since it consists of two discrete steps: users first create an input and afterwards the system provides physical output.
By decreasing the interaction unit even further to a single feature, we can achieve real-time physical feedback: Input by the user and output by the fabrication device are so tightly coupled that no visible lag exists. This allows us to explore what it means to transition from turn-taking interfaces, which only allow exploring one option at a time, to direct manipulation interfaces with real-time physical feedback, which allow users to explore the entire space of options continuously with a single interaction. We present a system called FormFab, which allows for such direct control. FormFab is based on the same principle as LaserOrigami: It uses a workpiece that when warmed up becomes compliant and can be reshaped. However, FormFab achieves the reshaping not based on gravity, but through a pneumatic system that users can control interactively. As users interact, they see the shape change in real-time.
We conclude this dissertation by extrapolating the current evolution into a future in which large numbers of people use the new technology to create objects. We see two additional challenges on the horizon: sustainability and intellectual property. We investigate sustainability by demonstrating how to print less and instead patch physical objects. We explore questions around intellectual property with a system called Scotty that transfers objects without creating duplicates, thereby preserving the designer's copyright.
Bildverarbeitungsanwendungen stellen besondere Ansprüche an das ausführende Rechensystem. Einerseits ist eine hohe Rechenleistung erforderlich. Andererseits ist eine hohe Flexibilität von Vorteil, da die Entwicklung tendentiell ein experimenteller und interaktiver Prozess ist. Für neue Anwendungen tendieren Entwickler dazu, eine Rechenarchitektur zu wählen, die sie gut kennen, anstatt eine Architektur einzusetzen, die am besten zur Anwendung passt. Bildverarbeitungsalgorithmen sind inhärent parallel, doch herkömmliche bildverarbeitende eingebettete Systeme basieren meist auf sequentiell arbeitenden Prozessoren. Im Gegensatz zu dieser "Unstimmigkeit" können hocheffiziente Systeme aus einer gezielten Synergie aus Software- und Hardwarekomponenten aufgebaut werden. Die Konstruktion solcher System ist jedoch komplex und viele Lösungen, wie zum Beispiel grobgranulare Architekturen oder anwendungsspezifische Programmiersprachen, sind oft zu akademisch für einen Einsatz in der Wirtschaft. Die vorliegende Arbeit soll ein Beitrag dazu leisten, die Komplexität von Hardware-Software-Systemen zu reduzieren und damit die Entwicklung hochperformanter on-Chip-Systeme im Bereich Bildverarbeitung zu vereinfachen und wirtschaftlicher zu machen. Dabei wurde Wert darauf gelegt, den Aufwand für Einarbeitung, Entwicklung als auch Erweiterungen gering zu halten. Es wurde ein Entwurfsfluss konzipiert und umgesetzt, welcher es dem Softwareentwickler ermöglicht, Berechnungen durch Hardwarekomponenten zu beschleunigen und das zu Grunde liegende eingebettete System komplett zu prototypisieren. Hierbei werden komplexe Bildverarbeitungsanwendungen betrachtet, welche ein Betriebssystem erfordern, wie zum Beispiel verteilte Kamerasensornetzwerke. Die eingesetzte Software basiert auf Linux und der Bildverarbeitungsbibliothek OpenCV. Die Verteilung der Berechnungen auf Software- und Hardwarekomponenten und die daraus resultierende Ablaufplanung und Generierung der Rechenarchitektur erfolgt automatisch. Mittels einer auf der Antwortmengenprogrammierung basierten Entwurfsraumexploration ergeben sich Vorteile bei der Modellierung und Erweiterung. Die Systemsoftware wird mit OpenEmbedded/Bitbake synthetisiert und die erzeugten on-Chip-Architekturen auf FPGAs realisiert.
Die öffentliche Verwaltung setzt seit mehreren Jahren E-Government-Anwendungssysteme ein, um ihre Verwaltungsprozesse intensiver mit moderner Informationstechnik zu unterstützen. Da die öffentliche Verwaltung in ihrem Handeln in besonderem Maße an Recht und Gesetz gebunden ist verstärkt und verbreitet sich der Zusammenhang zwischen den Gesetzen und Rechtsvorschriften einerseits und der zur Aufgabenunterstützung eingesetzten Informationstechnik andererseits. Aus Sicht der Softwaretechnik handelt es sich bei diesem Zusammenhang um eine spezielle Form der Verfolgbarkeit von Anforderungen (engl. Traceability), die so genannte Verfolgbarkeit im Vorfeld der Anforderungsspezifikation (Pre-Requirements Specification Traceability, kurz Pre-RS Traceability), da sie Aspekte betrifft, die relevant sind, bevor die Anforderungen in eine Spezifikation eingeflossen sind (Ursprünge von Anforderungen). Der Ansatz dieser Arbeit leistet einen Beitrag zur Verfolgbarkeit im Vorfeld der Anforderungsspezifikation von E-Government-Anwendungssystemen. Er kombiniert dazu aktuelle Entwicklungen und Standards (insbesondere des World Wide Web Consortium und der Object Management Group) aus den Bereichen Verfolgbarkeit von Anforderungen, Semantic Web, Ontologiesprachen und modellgetriebener Softwareentwicklung. Der Lösungsansatz umfasst eine spezielle Ontologie des Verwaltungshandeln, die mit den Techniken, Methoden und Werkzeugen des Semantic Web eingesetzt wird, um in Texten von Rechtsvorschriften relevante Ursprünge von Anforderungen durch Annotationen mit einer definierten Semantik zu versehen. Darauf aufbauend wird das Ontology Definition Metamodel (ODM) verwendet, um die Annotationen als spezielle Individuen einer Ontologie auf Elemente der Unified Modeling Language (UML) abzubilden. Dadurch entsteht ein neuer Modelltyp Pre-Requirements Model (PRM), der das Vorfeld der Anforderungsspezifikation formalisiert. Modelle diesen Typs können auch verwendet werden, um Aspekte zu formalisieren die sich nicht oder nicht vollständig aus dem Text der Rechtsvorschrift ergeben. Weiterhin bietet das Modell die Möglichkeit zum Anschluss an die modellgetriebene Softwareentwicklung. In der Arbeit wird deshalb eine Erweiterung der Model Driven Architecture (MDA) vorgeschlagen. Zusätzlich zu den etablierten Modelltypen Computation Independent Model (CIM), Platform Independent Model (PIM) und Platform Specific Model (PSM) könnte der Einsatz des PRM Vorteile für die Verfolgbarkeit bringen. Wird die MDA mit dem PRM auf das Vorfeld der Anforderungsspezifikation ausgeweitet, kann eine Transformation des PRM in ein CIM als initiale Anforderungsspezifikation erfolgen, indem der MOF Query View Transformation Standard (QVT) eingesetzt wird. Als Teil des QVT-Standards ist die Aufzeichnung von Verfolgbarkeitsinformationen bei Modelltransformationen verbindlich. Um die semantische Lücke zwischen PRM und CIM zu überbrücken, erfolgt analog zum Einsatz des Plattformmodells (PM) in der PIM nach PSM Transformation der Einsatz spezieller Hilfsmodelle. Es kommen dafür die im Projekt "E-LoGo" an der Universität Potsdam entwickelten Referenzmodelle zum Einsatz. Durch die Aufzeichnung der Abbildung annotierter Textelemente auf Elemente im PRM und der Transformation der Elemente des PRM in Elemente des CIM kann durchgängige Verfolgbarkeit im Vorfeld der Anforderungsspezifikation erreicht werden. Der Ansatz basiert auf einer so genannten Verfolgbarkeitsdokumentation in Form verlinkter Hypertextdokumente, die mittels XSL-Stylesheet erzeugt wurden und eine Verbindung zur graphischen Darstellung des Diagramms (z. B. Anwendungsfall-, Klassendiagramm der UML) haben. Der Ansatz unterstützt die horizontale Verfolgbarkeit zwischen Elementen unterschiedlicher Modelle vorwärts- und rückwärtsgerichtet umfassend. Er bietet außerdem vertikale Verfolgbarkeit, die Elemente des gleichen Modells und verschiedener Modellversionen in Beziehung setzt. Über den offensichtlichen Nutzen einer durchgängigen Verfolgbarkeit im Vorfeld der Anforderungsspezifikation (z. B. Analyse der Auswirkungen einer Gesetzesänderung, Berücksichtigung des vollständigen Kontextes einer Anforderung bei ihrer Priorisierung) hinausgehend, bietet diese Arbeit eine erste Ansatzmöglichkeit für eine Feedback-Schleife im Prozess der Gesetzgebung. Stehen beispielsweise mehrere gleichwertige Gestaltungsoptionen eines Gesetzes zur Auswahl, können die Auswirkungen jeder Option analysiert und der Aufwand ihrer Umsetzung in E-Government-Anwendungen als Auswahlkriterium berücksichtigt werden. Die am 16. März 2011 in Kraft getretene Änderung des NKRG schreibt eine solche Analyse des so genannten „Erfüllungsaufwands“ für Teilbereiche des Verwaltungshandelns bereits heute verbindlich vor. Für diese Analyse kann die vorliegende Arbeit einen Ansatz bieten, um zu fundierten Aussagen über den Änderungsaufwand eingesetzter E-Government-Anwendungssysteme zu kommen.
Structuring process models
(2012)
One can fairly adopt the ideas of Donald E. Knuth to conclude that process modeling is both a science and an art. Process modeling does have an aesthetic sense. Similar to composing an opera or writing a novel, process modeling is carried out by humans who undergo creative practices when engineering a process model. Therefore, the very same process can be modeled in a myriad number of ways. Once modeled, processes can be analyzed by employing scientific methods. Usually, process models are formalized as directed graphs, with nodes representing tasks and decisions, and directed arcs describing temporal constraints between the nodes. Common process definition languages, such as Business Process Model and Notation (BPMN) and Event-driven Process Chain (EPC) allow process analysts to define models with arbitrary complex topologies. The absence of structural constraints supports creativity and productivity, as there is no need to force ideas into a limited amount of available structural patterns. Nevertheless, it is often preferable that models follow certain structural rules. A well-known structural property of process models is (well-)structuredness. A process model is (well-)structured if and only if every node with multiple outgoing arcs (a split) has a corresponding node with multiple incoming arcs (a join), and vice versa, such that the set of nodes between the split and the join induces a single-entry-single-exit (SESE) region; otherwise the process model is unstructured. The motivations for well-structured process models are manifold: (i) Well-structured process models are easier to layout for visual representation as their formalizations are planar graphs. (ii) Well-structured process models are easier to comprehend by humans. (iii) Well-structured process models tend to have fewer errors than unstructured ones and it is less probable to introduce new errors when modifying a well-structured process model. (iv) Well-structured process models are better suited for analysis with many existing formal techniques applicable only for well-structured process models. (v) Well-structured process models are better suited for efficient execution and optimization, e.g., when discovering independent regions of a process model that can be executed concurrently. Consequently, there are process modeling languages that encourage well-structured modeling, e.g., Business Process Execution Language (BPEL) and ADEPT. However, the well-structured process modeling implies some limitations: (i) There exist processes that cannot be formalized as well-structured process models. (ii) There exist processes that when formalized as well-structured process models require a considerable duplication of modeling constructs. Rather than expecting well-structured modeling from start, we advocate for the absence of structural constraints when modeling. Afterwards, automated methods can suggest, upon request and whenever possible, alternative formalizations that are "better" structured, preferably well-structured. In this thesis, we study the problem of automatically transforming process models into equivalent well-structured models. The developed transformations are performed under a strong notion of behavioral equivalence which preserves concurrency. The findings are implemented in a tool, which is publicly available.
Computer Security deals with the detection and mitigation of threats to computer networks, data, and computing hardware. This
thesis addresses the following two computer security problems: email spam campaign and malware detection.
Email spam campaigns can easily be generated using popular dissemination tools by specifying simple grammars that serve as message templates. A grammar is disseminated to nodes of a bot net, the nodes create messages by instantiating the grammar at random. Email spam campaigns can encompass huge data volumes and therefore pose a threat to the stability of the infrastructure of email service providers that have to store them. Malware -software that serves a malicious purpose- is affecting web servers, client computers via active content, and client computers through executable files. Without the help of malware detection systems it would be easy for malware creators to collect sensitive information or to infiltrate computers.
The detection of threats -such as email-spam messages, phishing messages, or malware- is an adversarial and therefore intrinsically
difficult problem. Threats vary greatly and evolve over time. The detection of threats based on manually-designed rules is therefore
difficult and requires a constant engineering effort. Machine-learning is a research area that revolves around the analysis of data and the discovery of patterns that describe aspects of the data. Discriminative learning methods extract prediction models from data that are optimized to predict a target attribute as accurately as possible. Machine-learning methods hold the promise of automatically identifying patterns that robustly and accurately detect threats. This thesis focuses on the design and analysis of discriminative learning methods for the two computer-security problems under investigation: email-campaign and malware detection.
The first part of this thesis addresses email-campaign detection. We focus on regular expressions as a syntactic framework, because regular expressions are intuitively comprehensible by security engineers and administrators, and they can be applied as a detection mechanism in an extremely efficient manner. In this setting, a prediction model is provided with exemplary messages from an email-spam campaign. The prediction model has to generate a regular expression that reveals the syntactic pattern that underlies the entire campaign, and that a security engineers finds comprehensible and feels confident enough to use the expression to blacklist further messages at the email server. We model this problem as two-stage learning problem with structured input and output spaces which can be solved using standard cutting plane methods. Therefore we develop an appropriate loss function, and derive a decoder for the resulting optimization problem.
The second part of this thesis deals with the problem of predicting whether a given JavaScript or PHP file is malicious or benign. Recent malware analysis techniques use static or dynamic features, or both. In fully dynamic analysis, the software or script is executed and observed for malicious behavior in a sandbox environment. By contrast, static analysis is based on features that can be extracted directly from the program file. In order to bypass static detection mechanisms, code obfuscation techniques are used to spread a malicious program file in many different syntactic variants. Deobfuscating the code before applying a static classifier can be subjected to mostly static code analysis and can overcome the problem of obfuscated malicious code, but on the other hand increases the computational costs of malware detection by an order of magnitude. In this thesis we present a cascaded architecture in which a classifier first performs a static analysis of the original code and -based on the outcome of this first classification step- the code may be deobfuscated and classified again. We explore several types of features including token $n$-grams, orthogonal sparse bigrams, subroutine-hashings, and syntax-tree features and study the robustness of detection methods and feature types against the evolution of malware over time. The developed tool scans very large file collections quickly and accurately.
Each model is evaluated on real-world data and compared to reference methods. Our approach of inferring regular expressions to filter emails belonging to an email spam campaigns leads to models with a high true-positive rate at a very low false-positive rate that is an order of magnitude lower than that of a commercial content-based filter. Our presented system -REx-SVMshort- is being used by a commercial email service provider and complements content-based and IP-address based filtering.
Our cascaded malware detection system is evaluated on a high-quality data set of almost 400,000 conspicuous PHP files and a collection of more than 1,00,000 JavaScript files. From our case study we can conclude that our system can quickly and accurately process large data collections at a low false-positive rate.
This work introduces novel internal and external memory algorithms for computing voxel skeletons of massive voxel objects with complex network-like architecture and for converting these voxel skeletons to piecewise linear geometry, that is triangle meshes and piecewise straight lines. The presented techniques help to tackle the challenge of visualizing and analyzing 3d images of increasing size and complexity, which are becoming more and more important in, for example, biological and medical research. Section 2.3.1 contributes to the theoretical foundations of thinning algorithms with a discussion of homotopic thinning in the grid cell model. The grid cell model explicitly represents a cell complex built of faces, edges, and vertices shared between voxels. A characterization of pairs of cells to be deleted is much simpler than characterizations of simple voxels were before. The grid cell model resolves topologically unclear voxel configurations at junctions and locked voxel configurations causing, for example, interior voxels in sets of non-simple voxels. A general conclusion is that the grid cell model is superior to indecomposable voxels for algorithms that need detailed control of topology. Section 2.3.2 introduces a noise-insensitive measure based on the geodesic distance along the boundary to compute two-dimensional skeletons. The measure is able to retain thin object structures if they are geometrically important while ignoring noise on the object's boundary. This combination of properties is not known of other measures. The measure is also used to guide erosion in a thinning process from the boundary towards lines centered within plate-like structures. Geodesic distance based quantities seem to be well suited to robustly identify one- and two-dimensional skeletons. Chapter 6 applies the method to visualization of bone micro-architecture. Chapter 3 describes a novel geometry generation scheme for representing voxel skeletons, which retracts voxel skeletons to piecewise linear geometry per dual cube. The generated triangle meshes and graphs provide a link to geometry processing and efficient rendering of voxel skeletons. The scheme creates non-closed surfaces with boundaries, which contain fewer triangles than a representation of voxel skeletons using closed surfaces like small cubes or iso-surfaces. A conclusion is that thinking specifically about voxel skeleton configurations instead of generic voxel configurations helps to deal with the topological implications. The geometry generation is one foundation of the applications presented in Chapter 6. Chapter 5 presents a novel external memory algorithm for distance ordered homotopic thinning. The presented method extends known algorithms for computing chamfer distance transformations and thinning to execute I/O-efficiently when input is larger than the available main memory. The applied block-wise decomposition schemes are quite simple. Yet it was necessary to carefully analyze effects of block boundaries to devise globally correct external memory variants of known algorithms. In general, doing so is superior to naive block-wise processing ignoring boundary effects. Chapter 6 applies the algorithms in a novel method based on confocal microscopy for quantitative study of micro-vascular networks in the field of microcirculation.
Mit zunehmender Komplexität technischer Softwaresysteme ist die Nachfrage an produktiveren Methoden und Werkzeugen auch im sicherheitskritischen Umfeld gewachsen. Da insbesondere objektorientierte und modellbasierte Ansätze und Methoden ausgezeichnete Eigenschaften zur Entwicklung großer und komplexer Systeme besitzen, ist zu erwarten, dass diese in naher Zukunft selbst bis in sicherheitskritische Bereiche der Softwareentwicklung vordringen. Mit der Unified Modeling Language Real-Time (UML-RT) wird eine Softwareentwicklungsmethode für technische Systeme durch die Object Management Group (OMG) propagiert. Für den praktischen Einsatz im technischen und sicherheitskritischen Umfeld muss diese Methode nicht nur bestimmte technische Eigenschaften, beispielsweise temporale Analysierbarkeit, besitzen, sondern auch in einen bestehenden Qualitätssicherungsprozess integrierbar sein. Ein wichtiger Aspekt der Integration der UML-RT in ein qualitätsorientiertes Prozessmodell, beispielsweise in das V-Modell, ist die Verfügbarkeit von ausgereiften Konzepten und Methoden für einen systematischen Modultest. Der Modultest dient als erste Qualititätssicherungsphase nach der Implementierung der Fehlerfindung und dem Qualitätsnachweis für jede separat prüfbare Softwarekomponente eines Systems. Während dieser Phase stellt die Durchführung von systematischen Tests die wichtigste Qualitätssicherungsmaßnahme dar. Während zum jetzigen Zeitpunkt zwar ausgereifte Methoden und Werkzeuge für die modellbasierte Softwareentwicklung zur Verfügung stehen, existieren nur wenig überzeugende Lösungen für eine systematische modellbasierte Modulprüfung. Die durchgängige Verwendung ausführbarer Modelle und Codegenerierung stellen wesentliche Konzepte der modellbasierten Softwareentwicklung dar. Sie dienen der konstruktiven Fehlerreduktion durch Automatisierung ansonsten fehlerträchtiger, manueller Vorgänge. Im Rahmen einer modellbasierten Qualitätssicherung sollten diese Konzepte konsequenterweise in die späteren Qualitätssicherungsphasen transportiert werden. Daher ist eine wesentliche Forderung an ein Verfahren zur modellbasierten Modulprüfung ein möglichst hoher Grad an Automatisierung. In aktuellen Entwicklungen hat sich für die Generierung von Testfällen auf Basis von Zustandsautomaten die Verwendung von Model Checking als effiziente und an die vielfältigsten Testprobleme anpassbare Methode bewährt. Der Ansatz des Model Checking stammt ursprünglich aus dem Entwurf von Kommunikationsprotokollen und wurde bereits erfolgreich auf verschiedene Probleme der Modellierung technischer Software angewendet. Insbesondere in der Gegenwart ausführbarer, automatenbasierter Modelle erscheint die Verwendung von Model Checking sinnvoll, das die Existenz einer formalen, zustandsbasierten Spezifikation voraussetzt. Ein ausführbares, zustandsbasiertes Modell erfüllt diese Anforderungen in der Regel. Aus diesen Gründen ist die Wahl eines Model Checking Ansatzes für die Generierung von Testfällen im Rahmen eines modellbasierten Modultestverfahrens eine logische Konsequenz. Obwohl in der aktuellen Spezifikation der UML-RT keine eindeutigen Aussagen über den zur Verhaltensbeschreibung zu verwendenden Formalismus gemacht werden, ist es wahrscheinlich, dass es sich bei der UML-RT um eine zu Real-Time Object-Oriented Modeling (ROOM) kompatible Methode handelt. Alle in dieser Arbeit präsentierten Methoden und Ergebnisse sind somit auf die kommende UML-RT übertragbar und von sehr aktueller Bedeutung. Aus den genannten Gründen verfolgt diese Arbeit das Ziel, die analytische Qualitätssicherung in der modellbasierten Softwareentwicklung mittels einer modellbasierten Methode für den Modultest zu verbessern. Zu diesem Zweck wird eine neuartige Testmethode präsentiert, die auf automatenbasierten Verhaltensmodellen und CTL Model Checking basiert. Die Testfallgenerierung kann weitgehend automatisch erfolgen, um Fehler durch menschlichen Einfluss auszuschließen. Das entwickelte Modultestverfahren ist in die technischen Konzepte Model Driven Architecture und ROOM, beziehungsweise UML-RT, sowie in die organisatorischen Konzepte eines qualitätsorientierten Prozessmodells, beispielsweise das V-Modell, integrierbar.
Software-as-a-Service (SaaS) offers several advantages to both service providers and users. Service providers can benefit from the reduction of Total Cost of Ownership (TCO), better scalability, and better resource utilization. On the other hand, users can use the service anywhere and anytime, and minimize upfront investment by following the pay-as-you-go model. Despite the benefits of SaaS, users still have concerns about the security and privacy of their data. Due to the nature of SaaS and the Cloud in general, the data and the computation are beyond the users' control, and hence data security becomes a vital factor in this new paradigm. Furthermore, in multi-tenant SaaS applications, the tenants become more concerned about the confidentiality of their data since several tenants are co-located onto a shared infrastructure.
To address those concerns, we start protecting the data from the provisioning process by controlling how tenants are being placed in the infrastructure. We present a resource allocation algorithm designed to minimize the risk of co-resident tenants called SecPlace. It enables the SaaS provider to control the resource (i.e., database instance) allocation process while taking into account the security of tenants as a requirement.
Due to the design principles of the multi-tenancy model, tenants follow some degree of sharing on both application and infrastructure levels. Thus, strong security-isolation should be present. Therefore, we develop SignedQuery, a technique that prevents one tenant from accessing others' data. We use the Signing Concept to create a signature that is used to sign the tenant's request, then the server can verifies the signature and recognizes the requesting tenant, and hence ensures that the data to be accessed is belonging to the legitimate tenant.
Finally, Data confidentiality remains a critical concern due to the fact that data in the Cloud is out of users' premises, and hence beyond their control. Cryptography is increasingly proposed as a potential approach to address such a challenge. Therefore, we present SecureDB, a system designed to run SQL-based applications over an encrypted database. SecureDB captures the schema design and analyzes it to understand the internal structure of the data (i.e., relationships between the tables and their attributes). Moreover, we determine the appropriate partialhomomorphic encryption scheme for each attribute where computation is possible even when the data is encrypted.
To evaluate our work, we conduct extensive experiments with di↵erent settings. The main use case in our work is a popular open source HRM application, called OrangeHRM. The results show that our multi-layered approach is practical, provides enhanced security and isolation among tenants, and have a moderate complexity in terms of processing encrypted data.
The field of machine learning studies algorithms that infer predictive models from data. Predictive models are applicable for many practical tasks such as spam filtering, face and handwritten digit recognition, and personalized product recommendation. In general, they are used to predict a target label for a given data instance. In order to make an informed decision about the deployment of a predictive model, it is crucial to know the model’s approximate performance. To evaluate performance, a set of labeled test instances is required that is drawn from the distribution the model will be exposed to at application time. In many practical scenarios, unlabeled test instances are readily available, but the process of labeling them can be a time- and cost-intensive task and may involve a human expert. This thesis addresses the problem of evaluating a given predictive model accurately with minimal labeling effort. We study an active model evaluation process that selects certain instances of the data according to an instrumental sampling distribution and queries their labels. We derive sampling distributions that minimize estimation error with respect to different performance measures such as error rate, mean squared error, and F-measures. An analysis of the distribution that governs the estimator leads to confidence intervals, which indicate how precise the error estimation is. Labeling costs may vary across different instances depending on certain characteristics of the data. For instance, documents differ in their length, comprehensibility, and technical requirements; these attributes affect the time a human labeler needs to judge relevance or to assign topics. To address this, the sampling distribution is extended to incorporate instance-specific costs. We empirically study conditions under which the active evaluation processes are more accurate than a standard estimate that draws equally many instances from the test distribution. We also address the problem of comparing the risks of two predictive models. The standard approach would be to draw instances according to the test distribution, label the selected instances, and apply statistical tests to identify significant differences. Drawing instances according to an instrumental distribution affects the power of a statistical test. We derive a sampling procedure that maximizes test power when used to select instances, and thereby minimizes the likelihood of choosing the inferior model. Furthermore, we investigate the task of comparing several alternative models; the objective of an evaluation could be to rank the models according to the risk that they incur or to identify the model with lowest risk. An experimental study shows that the active procedure leads to higher test power than the standard test in many application domains. Finally, we study the problem of evaluating the performance of ranking functions, which are used for example for web search. In practice, ranking performance is estimated by applying a given ranking model to a representative set of test queries and manually assessing the relevance of all retrieved items for each query. We apply the concepts of active evaluation and active comparison to ranking functions and derive optimal sampling distributions for the commonly used performance measures Discounted Cumulative Gain and Expected Reciprocal Rank. Experiments on web search engine data illustrate significant reductions in labeling costs.
Emotions are a central element of human experience. They occur with high frequency in everyday life and play an important role in decision making. However, currently there is no consensus among researchers on what constitutes an emotion and on how emotions should be investigated. This dissertation identifies three problems of current emotion research: the problem of ground truth, the problem of incomplete constructs and the problem of optimal representation. I argue for a focus on the detailed measurement of emotion manifestations with computer-aided methods to solve these problems. This approach is demonstrated in three research projects, which describe the development of methods specific to these problems as well as their application to concrete research questions.
The problem of ground truth describes the practice to presuppose a certain structure of emotions as the a priori ground truth. This determines the range of emotion descriptions and sets a standard for the correct assignment of these descriptions. The first project illustrates how this problem can be circumvented with a multidimensional emotion perception paradigm which stands in contrast to the emotion recognition paradigm typically employed in emotion research. This paradigm allows to calculate an objective difficulty measure and to collect subjective difficulty ratings for the perception of emotional stimuli. Moreover, it enables the use of an arbitrary number of emotion stimuli categories as compared to the commonly used six basic emotion categories. Accordingly, we collected data from 441 participants using dynamic facial expression stimuli from 40 emotion categories. Our findings suggest an increase in emotion perception difficulty with increasing actor age and provide evidence to suggest that young adults, the elderly and men underestimate their emotion perception difficulty. While these effects were predicted from the literature, we also found unexpected and novel results. In particular, the increased difficulty on the objective difficulty measure for female actors and observers stood in contrast to reported findings. Exploratory analyses revealed low relevance of person-specific variables for the prediction of emotion perception difficulty, but highlighted the importance of a general pleasure dimension for the ease of emotion perception.
The second project targets the problem of incomplete constructs which relates to vaguely defined psychological constructs on emotion with insufficient ties to tangible manifestations. The project exemplifies how a modern data collection method such as face tracking data can be used to sharpen these constructs on the example of arousal, a long-standing but fuzzy construct in emotion research. It describes how measures of distance, speed and magnitude of acceleration can be computed from face tracking data and investigates their intercorrelations. We find moderate to strong correlations among all measures of static information on one hand and all measures of dynamic information on the other. The project then investigates how self-rated arousal is tied to these measures in 401 neurotypical individuals and 19 individuals with autism. Distance to the neutral face was predictive of arousal ratings in both groups. Lower mean arousal ratings were found for the autistic group, but no difference in correlation of the measures and arousal ratings could be found between groups. Results were replicated in a high autistic traits group consisting of 41 participants. The findings suggest a qualitatively similar perception of arousal for individuals with and without autism. No correlations between valence ratings and any of the measures could be found which emphasizes the specificity of our tested measures for the construct of arousal.
The problem of optimal representation refers to the search for the best representation of emotions and the assumption that there is a one-fits-all solution. In the third project we introduce partial least squares analysis as a general method to find an optimal representation to relate two high-dimensional data sets to each other. The project demonstrates its applicability to emotion research on the question of emotion perception differences between men and women. The method was used with emotion rating data from 441 participants and face tracking data computed on 306 videos. We found quantitative as well as qualitative differences in the perception of emotional facial expressions between these groups. We showed that women’s emotional perception systematically captured more of the variance in facial expressions. Additionally, we could show that significant differences exist in the way that women and men perceive some facial expressions which could be visualized as concrete facial expression sequences. These expressions suggest differing perceptions of masked and ambiguous facial expressions between the sexes. In order to facilitate use of the developed method by the research community, a package for the statistical environment R was written. Furthermore, to call attention to the method and its usefulness for emotion research, a website was designed that allows users to explore a model of emotion ratings and facial expression data in an interactive fashion.
Cloud-RAID
(2014)
Advances in biotechnologies rapidly increase the number of molecules of a cell which can be observed simultaneously. This includes expression levels of thousands or ten-thousands of genes as well as concentration levels of metabolites or proteins. Such Profile data, observed at different times or at different experimental conditions (e.g., heat or dry stress), show how the biological experiment is reflected on the molecular level. This information is helpful to understand the molecular behaviour and to identify molecules or combination of molecules that characterise specific biological condition (e.g., disease). This work shows the potentials of component extraction algorithms to identify the major factors which influenced the observed data. This can be the expected experimental factors such as the time or temperature as well as unexpected factors such as technical artefacts or even unknown biological behaviour. Extracting components means to reduce the very high-dimensional data to a small set of new variables termed components. Each component is a combination of all original variables. The classical approach for that purpose is the principal component analysis (PCA). It is shown that, in contrast to PCA which maximises the variance only, modern approaches such as independent component analysis (ICA) are more suitable for analysing molecular data. The condition of independence between components of ICA fits more naturally our assumption of individual (independent) factors which influence the data. This higher potential of ICA is demonstrated by a crossing experiment of the model plant Arabidopsis thaliana (Thale Cress). The experimental factors could be well identified and, in addition, ICA could even detect a technical artefact. However, in continuously observations such as in time experiments, the data show, in general, a nonlinear distribution. To analyse such nonlinear data, a nonlinear extension of PCA is used. This nonlinear PCA (NLPCA) is based on a neural network algorithm. The algorithm is adapted to be applicable to incomplete molecular data sets. Thus, it provides also the ability to estimate the missing data. The potential of nonlinear PCA to identify nonlinear factors is demonstrated by a cold stress experiment of Arabidopsis thaliana. The results of component analysis can be used to build a molecular network model. Since it includes functional dependencies it is termed functional network. Applied to the cold stress data, it is shown that functional networks are appropriate to visualise biological processes and thereby reveals molecular dynamics.
BCH Codes mit kombinierter Korrektur und Erkennung In dieser Arbeit wird auf Grundlage des BCH Codes untersucht, wie eine Fehlerkorrektur mit einer Erkennung höherer Fehleranzahlen kombiniert werden kann. Mit dem Verfahren der 1-Bit Korrektur mit zusätzlicher Erkennung höherer Fehler wurde ein Ansatz entwickelt, welcher die Erkennung zusätzlicher Fehler durch das parallele Lösen einfacher Gleichungen der Form s_x = s_1^x durchführt. Die Anzahl dieser Gleichungen ist linear zu der Anzahl der zu überprüfenden höheren Fehler.
In dieser Arbeit wurde zusätzlich für bis zu 4-Bit Korrekturen mit zusätzlicher Erkennung höherer Fehler ein weiterer allgemeiner Ansatz vorgestellt. Dabei werden parallel für alle korrigierbaren Fehleranzahlen spekulative Fehlerkorrekturen durchgeführt. Aus den bestimmten Fehlerstellen werden spekulative Syndromkomponenten erzeugt, durch welche die Fehlerstellen bestätigt und höhere erkennbare Fehleranzahlen ausgeschlossen werden können. Die vorgestellten Ansätze unterscheiden sich von dem in entwickelten Ansatz, bei welchem die Anzahl der Fehlerstellen durch die Berechnung von Determinanten in absteigender Reihenfolge berechnet wird, bis die erste Determinante 0 bildet. Bei dem bekannten Verfahren ist durch die Berechnung der Determinanten eine faktorielle Anzahl an Berechnungen in Relation zu der Anzahl zu überprüfender Fehler durchzuführen. Im Vergleich zu dem bekannten sequentiellen Verfahrens nach Berlekamp Massey besitzen die Berechnungen im vorgestellten Ansatz simple Gleichungen und können parallel durchgeführt werden.Bei dem bekannten Verfahren zur parallelen Korrektur von 4-Bit Fehlern ist eine Gleichung vierten Grades im GF(2^m) zu lösen. Dies erfolgt, indem eine Hilfsgleichung dritten Grades und vier Gleichungen zweiten Grades parallel gelöst werden. In der vorliegenden Arbeit wurde gezeigt, dass sich eine Gleichung zweiten Grades einsparen lässt, wodurch sich eine Vereinfachung der Hardware bei einer parallelen Realisierung der 4-Bit Korrektur ergibt. Die erzielten Ergebnisse wurden durch umfangreiche Simulationen in Software und Hardwareimplementierungen überprüft.
Nowadays, model-driven engineering (MDE) promises to ease software development by decreasing the inherent complexity of classical software development. In order to deliver on this promise, MDE increases the level of abstraction and automation, through a consideration of domain-specific models (DSMs) and model operations (e.g. model transformations or code generations). DSMs conform to domain-specific modeling languages (DSMLs), which increase the level of abstraction, and model operations are first-class entities of software development because they increase the level of automation. Nevertheless, MDE has to deal with at least two new dimensions of complexity, which are basically caused by the increased linguistic and technological heterogeneity. The first dimension of complexity is setting up an MDE environment, an activity comprised of the implementation or selection of DSMLs and model operations. Setting up an MDE environment is both time-consuming and error-prone because of the implementation or adaptation of model operations. The second dimension of complexity is concerned with applying MDE for actual software development. Applying MDE is challenging because a collection of DSMs, which conform to potentially heterogeneous DSMLs, are required to completely specify a complex software system. A single DSML can only be used to describe a specific aspect of a software system at a certain level of abstraction and from a certain perspective. Additionally, DSMs are usually not independent but instead have inherent interdependencies, reflecting (partial) similar aspects of a software system at different levels of abstraction or from different perspectives. A subset of these dependencies are applications of various model operations, which are necessary to keep the degree of automation high. This becomes even worse when addressing the first dimension of complexity. Due to continuous changes, all kinds of dependencies, including the applications of model operations, must also be managed continuously. This comprises maintaining the existence of these dependencies and the appropriate (re-)application of model operations. The contribution of this thesis is an approach that combines traceability and model management to address the aforementioned challenges of configuring and applying MDE for software development. The approach is considered as a traceability approach because it supports capturing and automatically maintaining dependencies between DSMs. The approach is considered as a model management approach because it supports managing the automated (re-)application of heterogeneous model operations. In addition, the approach is considered as a comprehensive model management. Since the decomposition of model operations is encouraged to alleviate the first dimension of complexity, the subsequent composition of model operations is required to counteract their fragmentation. A significant portion of this thesis concerns itself with providing a method for the specification of decoupled yet still highly cohesive complex compositions of heterogeneous model operations. The approach supports two different kinds of compositions - data-flow compositions and context compositions. Data-flow composition is used to define a network of heterogeneous model operations coupled by sharing input and output DSMs alone. Context composition is related to a concept used in declarative model transformation approaches to compose individual model transformation rules (units) at any level of detail. In this thesis, context composition provides the ability to use a collection of dependencies as context for the composition of other dependencies, including model operations. In addition, the actual implementation of model operations, which are going to be composed, do not need to implement any composition concerns. The approach is realized by means of a formalism called an executable and dynamic hierarchical megamodel, based on the original idea of megamodels. This formalism supports specifying compositions of dependencies (traceability and model operations). On top of this formalism, traceability is realized by means of a localization concept, and model management by means of an execution concept.
Geospatial data has become a natural part of a growing number of information systems and services in the economy, society, and people's personal lives. In particular, virtual 3D city and landscape models constitute valuable information sources within a wide variety of applications such as urban planning, navigation, tourist information, and disaster management. Today, these models are often visualized in detail to provide realistic imagery. However, a photorealistic rendering does not automatically lead to high image quality, with respect to an effective information transfer, which requires important or prioritized information to be interactively highlighted in a context-dependent manner.
Approaches in non-photorealistic renderings particularly consider a user's task and camera perspective when attempting optimal expression, recognition, and communication of important or prioritized information. However, the design and implementation of non-photorealistic rendering techniques for 3D geospatial data pose a number of challenges, especially when inherently complex geometry, appearance, and thematic data must be processed interactively. Hence, a promising technical foundation is established by the programmable and parallel computing architecture of graphics processing units.
This thesis proposes non-photorealistic rendering techniques that enable both the computation and selection of the abstraction level of 3D geospatial model contents according to user interaction and dynamically changing thematic information. To achieve this goal, the techniques integrate with hardware-accelerated rendering pipelines using shader technologies of graphics processing units for real-time image synthesis. The techniques employ principles of artistic rendering, cartographic generalization, and 3D semiotics—unlike photorealistic rendering—to synthesize illustrative renditions of geospatial feature type entities such as water surfaces, buildings, and infrastructure networks. In addition, this thesis contributes a generic system that enables to integrate different graphic styles—photorealistic and non-photorealistic—and provide their seamless transition according to user tasks, camera view, and image resolution.
Evaluations of the proposed techniques have demonstrated their significance to the field of geospatial information visualization including topics such as spatial perception, cognition, and mapping. In addition, the applications in illustrative and focus+context visualization have reflected their potential impact on optimizing the information transfer regarding factors such as cognitive load, integration of non-realistic information, visualization of uncertainty, and visualization on small displays.
Business process models are used within a range of organizational initiatives, where every stakeholder has a unique perspective on a process and demands the respective model. As a consequence, multiple process models capturing the very same business process coexist. Keeping such models in sync is a challenge within an ever changing business environment: once a process is changed, all its models have to be updated. Due to a large number of models and their complex relations, model maintenance becomes error-prone and expensive. Against this background, business process model abstraction emerged as an operation reducing the number of stored process models and facilitating model management. Business process model abstraction is an operation preserving essential process properties and leaving out insignificant details in order to retain information relevant for a particular purpose. Process model abstraction has been addressed by several researchers. The focus of their studies has been on particular use cases and model transformations supporting these use cases. This thesis systematically approaches the problem of business process model abstraction shaping the outcome into a framework. We investigate the current industry demand in abstraction summarizing it in a catalog of business process model abstraction use cases. The thesis focuses on one prominent use case where the user demands a model with coarse-grained activities and overall process ordering constraints. We develop model transformations that support this use case starting with the transformations based on process model structure analysis. Further, abstraction methods considering the semantics of process model elements are investigated. First, we suggest how semantically related activities can be discovered in process models-a barely researched challenge. The thesis validates the designed abstraction methods against sets of industrial process models and discusses the method implementation aspects. Second, we develop a novel model transformation, which combined with the related activity discovery allows flexible non-hierarchical abstraction. In this way this thesis advocates novel model transformations that facilitate business process model management and provides the foundations for innovative tool support.
Biology has made great progress in identifying and measuring the building blocks of life. The availability of high-throughput methods in molecular biology has dramatically accelerated the growth of biological knowledge for various organisms. The advancements in genomic, proteomic and metabolomic technologies allow for constructing complex models of biological systems. An increasing number of biological repositories is available on the web, incorporating thousands of biochemical reactions and genetic regulations. Systems Biology is a recent research trend in life science, which fosters a systemic view on biology. In Systems Biology one is interested in integrating the knowledge from all these different sources into models that capture the interaction of these entities. By studying these models one wants to understand the emerging properties of the whole system, such as robustness. However, both measurements as well as biological networks are prone to considerable incompleteness, heterogeneity and mutual inconsistency, which makes it highly non-trivial to draw biologically meaningful conclusions in an automated way. Therefore, we want to promote Answer Set Programming (ASP) as a tool for discrete modeling in Systems Biology. ASP is a declarative problem solving paradigm, in which a problem is encoded as a logic program such that its answer sets represent solutions to the problem. ASP has intrinsic features to cope with incompleteness, offers a rich modeling language and highly efficient solving technology. We present ASP solutions, for the analysis of genetic regulatory networks, determining consistency with observed measurements and identifying minimal causes for inconsistency. We extend this approach for computing minimal repairs on model and data that restore consistency. This method allows for predicting unobserved data even in case of inconsistency. Further, we present an ASP approach to metabolic network expansion. This approach exploits the easy characterization of reachability in ASP and its various reasoning methods, to explore the biosynthetic capabilities of metabolic reaction networks and generate hypotheses for extending the network. Finally, we present the BioASP library, a Python library which encapsulates our ASP solutions into the imperative programming paradigm. The library allows for an easy integration of ASP solution into system rich environments, as they exist in Systems Biology.
The usage of mobile devices is rapidly growing with Android being the most prevalent mobile operating system. Thanks to the vast variety of mobile applications, users are preferring smartphones over desktops for day to day tasks like Internet surfing. Consequently, smartphones store a plenitude of sensitive data. This data together with the high values of smartphones make them an attractive target for device/data theft (thieves/malicious applications).
Unfortunately, state-of-the-art anti-theft solutions do not work if they do not have an active network connection, e.g., if the SIM card was removed from the device. In the majority of these cases, device owners permanently lose their smartphone together with their personal data, which is even worse.
Apart from that malevolent applications perform malicious activities to steal sensitive information from smartphones. Recent research considered static program analysis to detect dangerous data leaks. These analyses work well for data leaks due to inter-component communication, but suffer from shortcomings for inter-app communication with respect to precision, soundness, and scalability.
This thesis focuses on enhancing users' privacy on Android against physical device loss/theft and (un)intentional data leaks. It presents three novel frameworks: (1) ThiefTrap, an anti-theft framework for Android, (2) IIFA, a modular inter-app intent information flow analysis of Android applications, and (3) PIAnalyzer, a precise approach for PendingIntent vulnerability analysis.
ThiefTrap is based on a novel concept of an anti-theft honeypot account that protects the owner's data while preventing a thief from resetting the device.
We implemented the proposed scheme and evaluated it through an empirical user study with 35 participants. In this study, the owner's data could be protected, recovered, and anti-theft functionality could be performed unnoticed from the thief in all cases.
IIFA proposes a novel approach for Android's inter-component/inter-app communication (ICC/IAC) analysis. Our main contribution is the first fully automatic, sound, and precise ICC/IAC information flow analysis that is scalable for realistic apps due to modularity, avoiding combinatorial explosion: Our approach determines communicating apps using short summaries rather than inlining intent calls between components and apps, which requires simultaneously analyzing all apps installed on a device.
We evaluate IIFA in terms of precision, recall, and demonstrate its scalability to a large corpus of real-world apps. IIFA reports 62 problematic ICC-/IAC-related information flows via two or more apps/components.
PIAnalyzer proposes a novel approach to analyze PendingIntent related vulnerabilities. PendingIntents are a powerful and universal feature of Android for inter-component communication. We empirically evaluate PIAnalyzer on a set of 1000 randomly selected applications and find 1358 insecure usages of PendingIntents, including 70 severe vulnerabilities.
Interactive rendering techniques for focus+context visualization of 3D geovirtual environments
(2013)
This thesis introduces a collection of new real-time rendering techniques and applications for focus+context visualization of interactive 3D geovirtual environments such as virtual 3D city and landscape models. These environments are generally characterized by a large number of objects and are of high complexity with respect to geometry and textures. For these reasons, their interactive 3D rendering represents a major challenge. Their 3D depiction implies a number of weaknesses such as occlusions, cluttered image contents, and partial screen-space usage. To overcome these limitations and, thus, to facilitate the effective communication of geo-information, principles of focus+context visualization can be used for the design of real-time 3D rendering techniques for 3D geovirtual environments (see Figure). In general, detailed views of a 3D geovirtual environment are combined seamlessly with abstracted views of the context within a single image. To perform the real-time image synthesis required for interactive visualization, dedicated parallel processors (GPUs) for rasterization of computer graphics primitives are used. For this purpose, the design and implementation of appropriate data structures and rendering pipelines are necessary. The contribution of this work comprises the following five real-time rendering methods: • The rendering technique for 3D generalization lenses enables the combination of different 3D city geometries (e.g., generalized versions of a 3D city model) in a single image in real time. The method is based on a generalized and fragment-precise clipping approach, which uses a compressible, raster-based data structure. It enables the combination of detailed views in the focus area with the representation of abstracted variants in the context area. • The rendering technique for the interactive visualization of dynamic raster data in 3D geovirtual environments facilitates the rendering of 2D surface lenses. It enables a flexible combination of different raster layers (e.g., aerial images or videos) using projective texturing for decoupling image and geometry data. Thus, various overlapping and nested 2D surface lenses of different contents can be visualized interactively. • The interactive rendering technique for image-based deformation of 3D geovirtual environments enables the real-time image synthesis of non-planar projections, such as cylindrical and spherical projections, as well as multi-focal 3D fisheye-lenses and the combination of planar and non-planar projections. • The rendering technique for view-dependent multi-perspective views of 3D geovirtual environments, based on the application of global deformations to the 3D scene geometry, can be used for synthesizing interactive panorama maps to combine detailed views close to the camera (focus) with abstract views in the background (context). This approach reduces occlusions, increases the usage the available screen space, and reduces the overload of image contents. • The object-based and image-based rendering techniques for highlighting objects and focus areas inside and outside the view frustum facilitate preattentive perception. The concepts and implementations of interactive image synthesis for focus+context visualization and their selected applications enable a more effective communication of spatial information, and provide building blocks for design and development of new applications and systems in the field of 3D geovirtual environments.
Deciphering the functioning of biological networks is one of the central tasks in systems biology. In particular, signal transduction networks are crucial for the understanding of the cellular response to external and internal perturbations. Importantly, in order to cope with the complexity of these networks, mathematical and computational modeling is required. We propose a computational modeling framework in order to achieve more robust discoveries in the context of logical signaling networks. More precisely, we focus on modeling the response of logical signaling networks by means of automated reasoning using Answer Set Programming (ASP). ASP provides a declarative language for modeling various knowledge representation and reasoning problems. Moreover, available ASP solvers provide several reasoning modes for assessing the multitude of answer sets. Therefore, leveraging its rich modeling language and its highly efficient solving capacities, we use ASP to address three challenging problems in the context of logical signaling networks: learning of (Boolean) logical networks, experimental design, and identification of intervention strategies. Overall, the contribution of this thesis is three-fold. Firstly, we introduce a mathematical framework for characterizing and reasoning on the response of logical signaling networks. Secondly, we contribute to a growing list of successful applications of ASP in systems biology. Thirdly, we present a software providing a complete pipeline for automated reasoning on the response of logical signaling networks.
The exponential expanding of the numbers of web sites and Internet users makes WWW the most important global information resource. From information publishing and electronic commerce to entertainment and social networking, the Web allows an inexpensive and efficient access to the services provided by individuals and institutions. The basic units for distributing these services are the web sites scattered throughout the world. However, the extreme fragility of web services and content, the high competence between similar services supplied by different sites, and the wide geographic distributions of the web users drive the urgent requirement from the web managers to track and understand the usage interest of their web customers. This thesis, "X-tracking the Usage Interest on Web Sites", aims to fulfill this requirement. "X" stands two meanings: one is that the usage interest differs from various web sites, and the other is that usage interest is depicted from multi aspects: internal and external, structural and conceptual, objective and subjective. "Tracking" shows that our concentration is on locating and measuring the differences and changes among usage patterns. This thesis presents the methodologies on discovering usage interest on three kinds of web sites: the public information portal site, e-learning site that provides kinds of streaming lectures and social site that supplies the public discussions on IT issues. On different sites, we concentrate on different issues related with mining usage interest. The educational information portal sites were the first implementation scenarios on discovering usage patterns and optimizing the organization of web services. In such cases, the usage patterns are modeled as frequent page sets, navigation paths, navigation structures or graphs. However, a necessary requirement is to rebuild the individual behaviors from usage history. We give a systematic study on how to rebuild individual behaviors. Besides, this thesis shows a new strategy on building content clusters based on pair browsing retrieved from usage logs. The difference between such clusters and the original web structure displays the distance between the destinations from usage side and the expectations from design side. Moreover, we study the problem on tracking the changes of usage patterns in their life cycles. The changes are described from internal side integrating conceptual and structure features, and from external side for the physical features; and described from local side measuring the difference between two time spans, and global side showing the change tendency along the life cycle. A platform, Web-Cares, is developed to discover the usage interest, to measure the difference between usage interest and site expectation and to track the changes of usage patterns. E-learning site provides the teaching materials such as slides, recorded lecture videos and exercise sheets. We focus on discovering the learning interest on streaming lectures, such as real medias, mp4 and flash clips. Compared to the information portal site, the usage on streaming lectures encapsulates the variables such as viewing time and actions during learning processes. The learning interest is discovered in the form of answering 6 questions, which covers finding the relations between pieces of lectures and the preference among different forms of lectures. We prefer on detecting the changes of learning interest on the same course from different semesters. The differences on the content and structure between two courses leverage the changes on the learning interest. We give an algorithm on measuring the difference on learning interest integrated with similarity comparison between courses. A search engine, TASK-Moniminer, is created to help the teacher query the learning interest on their streaming lectures on tele-TASK site. Social site acts as an online community attracting web users to discuss the common topics and share their interesting information. Compared to the public information portal site and e-learning web site, the rich interactions among users and web content bring the wider range of content quality, on the other hand, provide more possibilities to express and model usage interest. We propose a framework on finding and recommending high reputation articles in a social site. We observed that the reputation is classified into global and local categories; the quality of the articles having high reputation is related with the content features. Based on these observations, our framework is implemented firstly by finding the articles having global or local reputation, and secondly clustering articles based on their content relations, and then the articles are selected and recommended from each cluster based on their reputation ranks.
Intuitive Modelle der Informatik sind gedankliche Vorstellungen über informatische Konzepte, die mit subjektiver Gewissheit verbunden sind. Menschen verwenden sie, wenn sie die Arbeitsweise von Computerprogrammen nachvollziehen oder anderen erklären, die logische Korrektheit eines Programms prüfen oder in einem kreativen Prozess selbst Programme entwickeln. Intuitive Modelle können auf verschiedene Weise repräsentiert und kommuniziert werden, etwa verbal-abstrakt, durch ablauf- oder strukturorientierte Abbildungen und Filme oder konkrete Beispiele. Diskutiert werden in dieser Arbeit grundlegende intuitive Modelle für folgende inhaltliche Aspekte einer Programmausführung: Allokation von Aktivität bei einer Programmausführung, Benennung von Entitäten, Daten, Funktionen, Verarbeitung, Kontrollstrukturen zur Steuerung von Programmläufen, Rekursion, Klassen und Objekte. Mit Hilfe eines Systems von Online-Spielen, der Python Visual Sandbox, werden die psychische Realität verschiedener intuitiver Modelle bei Programmieranfängern nachgewiesen und fehlerhafte Anwendungen (Fehlvorstellungen) identifiziert.
Die stetige Weiterentwicklung von VR-Systemen bietet neue Möglichkeiten der Interaktion mit virtuellen Objekten im dreidimensionalen Raum, stellt Entwickelnde von VRAnwendungen aber auch vor neue Herausforderungen. Selektions- und Manipulationstechniken müssen unter Berücksichtigung des Anwendungsszenarios, der Zielgruppe und der zur Verfügung stehenden Ein- und Ausgabegeräte ausgewählt werden. Diese Arbeit leistet einen Beitrag dazu, die Auswahl von passenden Interaktionstechniken zu unterstützen. Hierfür wurde eine repräsentative Menge von Selektions- und Manipulationstechniken untersucht und, unter Berücksichtigung existierender Klassifikationssysteme, eine Taxonomie entwickelt, die die Analyse der Techniken hinsichtlich interaktionsrelevanter Eigenschaften ermöglicht. Auf Basis dieser Taxonomie wurden Techniken ausgewählt, die in einer explorativen Studie verglichen wurden, um Rückschlüsse auf die Dimensionen der Taxonomie zu ziehen und neue Indizien für Vor- und Nachteile der Techniken in spezifischen Anwendungsszenarien zu generieren. Die Ergebnisse der Arbeit münden in eine Webanwendung, die Entwickelnde von VR-Anwendungen gezielt dabei unterstützt, passende Selektions- und Manipulationstechniken für ein Anwendungsszenario auszuwählen, indem Techniken auf Basis der Taxonomie gefiltert und unter Verwendung der Resultate aus der Studie sortiert werden können.
Most of the microelectronic circuits fabricated today are synchronous, i.e. they are driven by one or several clock signals. Synchronous circuit design faces several fundamental challenges such as high-speed clock distribution, integration of multiple cores operating at different clock rates, reduction of power consumption and dealing with voltage, temperature, manufacturing and runtime variations. Asynchronous or clockless design plays a key role in alleviating these challenges, however the design and test of asynchronous circuits is much more difficult in comparison to their synchronous counterparts. A driving force for a widespread use of asynchronous technology is the availability of mature EDA (Electronic Design Automation) tools which provide an entire automated design flow starting from an HDL (Hardware Description Language) specification yielding the final circuit layout. Even though there was much progress in developing such EDA tools for asynchronous circuit design during the last two decades, the maturity level as well as the acceptance of them is still not comparable with tools for synchronous circuit design. In particular, logic synthesis (which implies the application of Boolean minimisation techniques) for the entire system's control path can significantly improve the efficiency of the resulting asynchronous implementation, e.g. in terms of chip area and performance. However, logic synthesis, in particular for asynchronous circuits, suffers from complexity problems. Signal Transitions Graphs (STGs) are labelled Petri nets which are a widely used to specify the interface behaviour of speed independent (SI) circuits - a robust subclass of asynchronous circuits. STG decomposition is a promising approach to tackle complexity problems like state space explosion in logic synthesis of SI circuits. The (structural) decomposition of STGs is guided by a partition of the output signals and generates a usually much smaller component STG for each partition member, i.e. a component STG with a much smaller state space than the initial specification. However, decomposition can result in component STGs that in isolation have so-called irreducible CSC conflicts (i.e. these components are not SI synthesisable anymore) even if the specification has none of them. A new approach is presented to avoid such conflicts by introducing internal communication between the components. So far, STG decompositions are guided by the finest output partitions, i.e. one output per component. However, this might not yield optimal circuit implementations. Efficient heuristics are presented to determine coarser partitions leading to improved circuits in terms of chip area. For the new algorithms correctness proofs are given and their implementations are incorporated into the decomposition tool DESIJ. The presented techniques are successfully applied to some benchmarks - including 'real-life' specifications arising in the context of control resynthesis - which delivered promising results.
This thesis is concerned with the solution of the blind source separation problem (BSS). The BSS problem occurs frequently in various scientific and technical applications. In essence, it consists in separating meaningful underlying components out of a mixture of a multitude of superimposed signals. In the recent research literature there are two related approaches to the BSS problem: The first is known as Independent Component Analysis (ICA), where the goal is to transform the data such that the components become as independent as possible. The second is based on the notion of diagonality of certain characteristic matrices derived from the data. Here the goal is to transform the matrices such that they become as diagonal as possible. In this thesis we study the latter method of approximate joint diagonalization (AJD) to achieve a solution of the BSS problem. After an introduction to the general setting, the thesis provides an overview on particular choices for the set of target matrices that can be used for BSS by joint diagonalization. As the main contribution of the thesis, new algorithms for approximate joint diagonalization of several matrices with non-orthogonal transformations are developed. These newly developed algorithms will be tested on synthetic benchmark datasets and compared to other previous diagonalization algorithms. Applications of the BSS methods to biomedical signal processing are discussed and exemplified with real-life data sets of multi-channel biomagnetic recordings.