004 Datenverarbeitung; Informatik
Refine
Year of publication
Document Type
- Doctoral Thesis (80)
- Article (48)
- Conference Proceeding (11)
- Master's Thesis (6)
- Postprint (6)
- Monograph/Edited Volume (3)
- Other (3)
- Bachelor Thesis (1)
- Habilitation Thesis (1)
- Moving Images (1)
Is part of the Bibliography
- yes (160) (remove)
Keywords
- Machine Learning (7)
- Maschinelles Lernen (7)
- answer set programming (6)
- Antwortmengenprogrammierung (5)
- Informatik (5)
- Answer Set Programming (3)
- Informatikdidaktik (3)
- higher education (3)
- image processing (3)
- machine learning (3)
Institute
- Institut für Informatik und Computational Science (160) (remove)
Mit zunehmender Komplexität technischer Softwaresysteme ist die Nachfrage an produktiveren Methoden und Werkzeugen auch im sicherheitskritischen Umfeld gewachsen. Da insbesondere objektorientierte und modellbasierte Ansätze und Methoden ausgezeichnete Eigenschaften zur Entwicklung großer und komplexer Systeme besitzen, ist zu erwarten, dass diese in naher Zukunft selbst bis in sicherheitskritische Bereiche der Softwareentwicklung vordringen. Mit der Unified Modeling Language Real-Time (UML-RT) wird eine Softwareentwicklungsmethode für technische Systeme durch die Object Management Group (OMG) propagiert. Für den praktischen Einsatz im technischen und sicherheitskritischen Umfeld muss diese Methode nicht nur bestimmte technische Eigenschaften, beispielsweise temporale Analysierbarkeit, besitzen, sondern auch in einen bestehenden Qualitätssicherungsprozess integrierbar sein. Ein wichtiger Aspekt der Integration der UML-RT in ein qualitätsorientiertes Prozessmodell, beispielsweise in das V-Modell, ist die Verfügbarkeit von ausgereiften Konzepten und Methoden für einen systematischen Modultest. Der Modultest dient als erste Qualititätssicherungsphase nach der Implementierung der Fehlerfindung und dem Qualitätsnachweis für jede separat prüfbare Softwarekomponente eines Systems. Während dieser Phase stellt die Durchführung von systematischen Tests die wichtigste Qualitätssicherungsmaßnahme dar. Während zum jetzigen Zeitpunkt zwar ausgereifte Methoden und Werkzeuge für die modellbasierte Softwareentwicklung zur Verfügung stehen, existieren nur wenig überzeugende Lösungen für eine systematische modellbasierte Modulprüfung. Die durchgängige Verwendung ausführbarer Modelle und Codegenerierung stellen wesentliche Konzepte der modellbasierten Softwareentwicklung dar. Sie dienen der konstruktiven Fehlerreduktion durch Automatisierung ansonsten fehlerträchtiger, manueller Vorgänge. Im Rahmen einer modellbasierten Qualitätssicherung sollten diese Konzepte konsequenterweise in die späteren Qualitätssicherungsphasen transportiert werden. Daher ist eine wesentliche Forderung an ein Verfahren zur modellbasierten Modulprüfung ein möglichst hoher Grad an Automatisierung. In aktuellen Entwicklungen hat sich für die Generierung von Testfällen auf Basis von Zustandsautomaten die Verwendung von Model Checking als effiziente und an die vielfältigsten Testprobleme anpassbare Methode bewährt. Der Ansatz des Model Checking stammt ursprünglich aus dem Entwurf von Kommunikationsprotokollen und wurde bereits erfolgreich auf verschiedene Probleme der Modellierung technischer Software angewendet. Insbesondere in der Gegenwart ausführbarer, automatenbasierter Modelle erscheint die Verwendung von Model Checking sinnvoll, das die Existenz einer formalen, zustandsbasierten Spezifikation voraussetzt. Ein ausführbares, zustandsbasiertes Modell erfüllt diese Anforderungen in der Regel. Aus diesen Gründen ist die Wahl eines Model Checking Ansatzes für die Generierung von Testfällen im Rahmen eines modellbasierten Modultestverfahrens eine logische Konsequenz. Obwohl in der aktuellen Spezifikation der UML-RT keine eindeutigen Aussagen über den zur Verhaltensbeschreibung zu verwendenden Formalismus gemacht werden, ist es wahrscheinlich, dass es sich bei der UML-RT um eine zu Real-Time Object-Oriented Modeling (ROOM) kompatible Methode handelt. Alle in dieser Arbeit präsentierten Methoden und Ergebnisse sind somit auf die kommende UML-RT übertragbar und von sehr aktueller Bedeutung. Aus den genannten Gründen verfolgt diese Arbeit das Ziel, die analytische Qualitätssicherung in der modellbasierten Softwareentwicklung mittels einer modellbasierten Methode für den Modultest zu verbessern. Zu diesem Zweck wird eine neuartige Testmethode präsentiert, die auf automatenbasierten Verhaltensmodellen und CTL Model Checking basiert. Die Testfallgenerierung kann weitgehend automatisch erfolgen, um Fehler durch menschlichen Einfluss auszuschließen. Das entwickelte Modultestverfahren ist in die technischen Konzepte Model Driven Architecture und ROOM, beziehungsweise UML-RT, sowie in die organisatorischen Konzepte eines qualitätsorientierten Prozessmodells, beispielsweise das V-Modell, integrierbar.
This paper describes the implementation of a workflow model for service-oriented computing of potential areas for wind turbines in jABC. By implementing a re-executable model the manual effort of a multi-criteria site analysis can be reduced. The aim is to determine the shift of typical geoprocessing tools of geographic information systems (GIS) from the desktop to the web. The analysis is based on a vector data set and mainly uses web services of the “Center for Spatial Information Science and Systems” (CSISS). This paper discusses effort, benefits and problems associated with the use of the web services.
The protein classification workflow described in this report enables users to get information about a novel protein sequence automatically. The information is derived by different bioinformatic analysis tools which calculate or predict features of a protein sequence. Also, databases are used to compare the novel sequence with known proteins.
In this bachelor’s thesis I implement the automatic theorem prover nanoCoP-Ω. This system is the result of porting arithmetic and equality handling procedures first introduced in the automatic theorem prover with arithmetic leanCoP-Ω into the similar system nanoCoP 2.0. To understand these procedures, I first introduce the mathematical background to both automatic theorem proving and arithmetic expressions. I present the predecessor projects leanCoP, nanoCoP and leanCoP-Ω, out of which nanCoP-Ω was developed. This is followed by an extensive description of the concepts the non-clausal connection calculus needed to be extended by, to allow for proving arithmetic expressions and equalities, as well as of their implementation into nanoCoP-Ω. An extensive comparison between both the runtimes and the number of solved problems of the systems nanoCoP-Ω and leanCoP-Ω was made. I come to the conclusion, that nanoCoP-Ω is considerably faster than leanCoP-Ω for small problems, though less well suited for larger problems. Additionally, I was able to construct a non-theorem that nanoCoP-Ω generates a false proof for. I discuss how this pressing issue could be resolved, as well as some possible optimizations and expansions of the system.
Physical computing covers the design and realization of interactive
objects and installations and allows students to develop concrete,
tangible products of the real world that arise from the learners’
imagination. This way, constructionist learning is raised to a level that
enables students to gain haptic experience and thereby concretizes the
virtual. In this paper the defining characteristics of physical computing
are described. Key competences to be gained with physical computing
will be identified.
This work introduces novel internal and external memory algorithms for computing voxel skeletons of massive voxel objects with complex network-like architecture and for converting these voxel skeletons to piecewise linear geometry, that is triangle meshes and piecewise straight lines. The presented techniques help to tackle the challenge of visualizing and analyzing 3d images of increasing size and complexity, which are becoming more and more important in, for example, biological and medical research. Section 2.3.1 contributes to the theoretical foundations of thinning algorithms with a discussion of homotopic thinning in the grid cell model. The grid cell model explicitly represents a cell complex built of faces, edges, and vertices shared between voxels. A characterization of pairs of cells to be deleted is much simpler than characterizations of simple voxels were before. The grid cell model resolves topologically unclear voxel configurations at junctions and locked voxel configurations causing, for example, interior voxels in sets of non-simple voxels. A general conclusion is that the grid cell model is superior to indecomposable voxels for algorithms that need detailed control of topology. Section 2.3.2 introduces a noise-insensitive measure based on the geodesic distance along the boundary to compute two-dimensional skeletons. The measure is able to retain thin object structures if they are geometrically important while ignoring noise on the object's boundary. This combination of properties is not known of other measures. The measure is also used to guide erosion in a thinning process from the boundary towards lines centered within plate-like structures. Geodesic distance based quantities seem to be well suited to robustly identify one- and two-dimensional skeletons. Chapter 6 applies the method to visualization of bone micro-architecture. Chapter 3 describes a novel geometry generation scheme for representing voxel skeletons, which retracts voxel skeletons to piecewise linear geometry per dual cube. The generated triangle meshes and graphs provide a link to geometry processing and efficient rendering of voxel skeletons. The scheme creates non-closed surfaces with boundaries, which contain fewer triangles than a representation of voxel skeletons using closed surfaces like small cubes or iso-surfaces. A conclusion is that thinking specifically about voxel skeleton configurations instead of generic voxel configurations helps to deal with the topological implications. The geometry generation is one foundation of the applications presented in Chapter 6. Chapter 5 presents a novel external memory algorithm for distance ordered homotopic thinning. The presented method extends known algorithms for computing chamfer distance transformations and thinning to execute I/O-efficiently when input is larger than the available main memory. The applied block-wise decomposition schemes are quite simple. Yet it was necessary to carefully analyze effects of block boundaries to devise globally correct external memory variants of known algorithms. In general, doing so is superior to naive block-wise processing ignoring boundary effects. Chapter 6 applies the algorithms in a novel method based on confocal microscopy for quantitative study of micro-vascular networks in the field of microcirculation.
Computer Security deals with the detection and mitigation of threats to computer networks, data, and computing hardware. This
thesis addresses the following two computer security problems: email spam campaign and malware detection.
Email spam campaigns can easily be generated using popular dissemination tools by specifying simple grammars that serve as message templates. A grammar is disseminated to nodes of a bot net, the nodes create messages by instantiating the grammar at random. Email spam campaigns can encompass huge data volumes and therefore pose a threat to the stability of the infrastructure of email service providers that have to store them. Malware -software that serves a malicious purpose- is affecting web servers, client computers via active content, and client computers through executable files. Without the help of malware detection systems it would be easy for malware creators to collect sensitive information or to infiltrate computers.
The detection of threats -such as email-spam messages, phishing messages, or malware- is an adversarial and therefore intrinsically
difficult problem. Threats vary greatly and evolve over time. The detection of threats based on manually-designed rules is therefore
difficult and requires a constant engineering effort. Machine-learning is a research area that revolves around the analysis of data and the discovery of patterns that describe aspects of the data. Discriminative learning methods extract prediction models from data that are optimized to predict a target attribute as accurately as possible. Machine-learning methods hold the promise of automatically identifying patterns that robustly and accurately detect threats. This thesis focuses on the design and analysis of discriminative learning methods for the two computer-security problems under investigation: email-campaign and malware detection.
The first part of this thesis addresses email-campaign detection. We focus on regular expressions as a syntactic framework, because regular expressions are intuitively comprehensible by security engineers and administrators, and they can be applied as a detection mechanism in an extremely efficient manner. In this setting, a prediction model is provided with exemplary messages from an email-spam campaign. The prediction model has to generate a regular expression that reveals the syntactic pattern that underlies the entire campaign, and that a security engineers finds comprehensible and feels confident enough to use the expression to blacklist further messages at the email server. We model this problem as two-stage learning problem with structured input and output spaces which can be solved using standard cutting plane methods. Therefore we develop an appropriate loss function, and derive a decoder for the resulting optimization problem.
The second part of this thesis deals with the problem of predicting whether a given JavaScript or PHP file is malicious or benign. Recent malware analysis techniques use static or dynamic features, or both. In fully dynamic analysis, the software or script is executed and observed for malicious behavior in a sandbox environment. By contrast, static analysis is based on features that can be extracted directly from the program file. In order to bypass static detection mechanisms, code obfuscation techniques are used to spread a malicious program file in many different syntactic variants. Deobfuscating the code before applying a static classifier can be subjected to mostly static code analysis and can overcome the problem of obfuscated malicious code, but on the other hand increases the computational costs of malware detection by an order of magnitude. In this thesis we present a cascaded architecture in which a classifier first performs a static analysis of the original code and -based on the outcome of this first classification step- the code may be deobfuscated and classified again. We explore several types of features including token $n$-grams, orthogonal sparse bigrams, subroutine-hashings, and syntax-tree features and study the robustness of detection methods and feature types against the evolution of malware over time. The developed tool scans very large file collections quickly and accurately.
Each model is evaluated on real-world data and compared to reference methods. Our approach of inferring regular expressions to filter emails belonging to an email spam campaigns leads to models with a high true-positive rate at a very low false-positive rate that is an order of magnitude lower than that of a commercial content-based filter. Our presented system -REx-SVMshort- is being used by a commercial email service provider and complements content-based and IP-address based filtering.
Our cascaded malware detection system is evaluated on a high-quality data set of almost 400,000 conspicuous PHP files and a collection of more than 1,00,000 JavaScript files. From our case study we can conclude that our system can quickly and accurately process large data collections at a low false-positive rate.
Multi-sided platforms (MSP) strongly affect markets and play a crucial part within the digital and networked economy. Although empirical evidence indicates their occurrence in many industries, research has not investigated the game-changing impact of MSP on traditional markets to a sufficient extent. More specifically, we have little knowledge of how MSP affect value creation and customer interaction in entire markets, exploiting the potential of digital technologies to offer new value propositions. Our paper addresses this research gap and provides an initial systematic approach to analyze the impact of MSP on the insurance industry. For this purpose, we analyze the state of the art in research and practice in order to develop a reference model of the value network for the insurance industry. On this basis, we conduct a case-study analysis to discover and analyze roles which are occupied or even newly created by MSP. As a final step, we categorize MSP with regard to their relation to traditional insurance companies, resulting in a classification scheme with four MSP standard types: Competition, Coordination, Cooperation, Collaboration.
Structuring process models
(2012)
One can fairly adopt the ideas of Donald E. Knuth to conclude that process modeling is both a science and an art. Process modeling does have an aesthetic sense. Similar to composing an opera or writing a novel, process modeling is carried out by humans who undergo creative practices when engineering a process model. Therefore, the very same process can be modeled in a myriad number of ways. Once modeled, processes can be analyzed by employing scientific methods. Usually, process models are formalized as directed graphs, with nodes representing tasks and decisions, and directed arcs describing temporal constraints between the nodes. Common process definition languages, such as Business Process Model and Notation (BPMN) and Event-driven Process Chain (EPC) allow process analysts to define models with arbitrary complex topologies. The absence of structural constraints supports creativity and productivity, as there is no need to force ideas into a limited amount of available structural patterns. Nevertheless, it is often preferable that models follow certain structural rules. A well-known structural property of process models is (well-)structuredness. A process model is (well-)structured if and only if every node with multiple outgoing arcs (a split) has a corresponding node with multiple incoming arcs (a join), and vice versa, such that the set of nodes between the split and the join induces a single-entry-single-exit (SESE) region; otherwise the process model is unstructured. The motivations for well-structured process models are manifold: (i) Well-structured process models are easier to layout for visual representation as their formalizations are planar graphs. (ii) Well-structured process models are easier to comprehend by humans. (iii) Well-structured process models tend to have fewer errors than unstructured ones and it is less probable to introduce new errors when modifying a well-structured process model. (iv) Well-structured process models are better suited for analysis with many existing formal techniques applicable only for well-structured process models. (v) Well-structured process models are better suited for efficient execution and optimization, e.g., when discovering independent regions of a process model that can be executed concurrently. Consequently, there are process modeling languages that encourage well-structured modeling, e.g., Business Process Execution Language (BPEL) and ADEPT. However, the well-structured process modeling implies some limitations: (i) There exist processes that cannot be formalized as well-structured process models. (ii) There exist processes that when formalized as well-structured process models require a considerable duplication of modeling constructs. Rather than expecting well-structured modeling from start, we advocate for the absence of structural constraints when modeling. Afterwards, automated methods can suggest, upon request and whenever possible, alternative formalizations that are "better" structured, preferably well-structured. In this thesis, we study the problem of automatically transforming process models into equivalent well-structured models. The developed transformations are performed under a strong notion of behavioral equivalence which preserves concurrency. The findings are implemented in a tool, which is publicly available.
Diese Arbeit befasst sich mit der Entwicklung einer Applikation, welche Infrastrukturdaten über Eisenbahnnetze generiert. Dabei bildet die Erzeugung der topologischen Informationen den Schwerpunkt dieser Arbeit. Der Anwender charakterisiert hierfür vorab das gewünschte Eisenbahnnetz, wobei die geforderten Eigenschaften die Randbedingungen darstellen, die bei der Synthese zu beachten sind. Zur Einhaltung dieser Bedingungen wird die Constraint-Programmierung eingesetzt, welche durch ihr spezielles Programmierparadigma konsistente Lösungen effizient erzeugt. Dies wird u.a. durch die Nachnutzung so genannter globaler Constraints erreicht. Aus diesem Grund wird insbesondere auf den Einsatz der Constraint-Programmierung bei der Modellierung und Implementierung der Applikation eingegangen.
Die öffentliche Verwaltung setzt seit mehreren Jahren E-Government-Anwendungssysteme ein, um ihre Verwaltungsprozesse intensiver mit moderner Informationstechnik zu unterstützen. Da die öffentliche Verwaltung in ihrem Handeln in besonderem Maße an Recht und Gesetz gebunden ist verstärkt und verbreitet sich der Zusammenhang zwischen den Gesetzen und Rechtsvorschriften einerseits und der zur Aufgabenunterstützung eingesetzten Informationstechnik andererseits. Aus Sicht der Softwaretechnik handelt es sich bei diesem Zusammenhang um eine spezielle Form der Verfolgbarkeit von Anforderungen (engl. Traceability), die so genannte Verfolgbarkeit im Vorfeld der Anforderungsspezifikation (Pre-Requirements Specification Traceability, kurz Pre-RS Traceability), da sie Aspekte betrifft, die relevant sind, bevor die Anforderungen in eine Spezifikation eingeflossen sind (Ursprünge von Anforderungen). Der Ansatz dieser Arbeit leistet einen Beitrag zur Verfolgbarkeit im Vorfeld der Anforderungsspezifikation von E-Government-Anwendungssystemen. Er kombiniert dazu aktuelle Entwicklungen und Standards (insbesondere des World Wide Web Consortium und der Object Management Group) aus den Bereichen Verfolgbarkeit von Anforderungen, Semantic Web, Ontologiesprachen und modellgetriebener Softwareentwicklung. Der Lösungsansatz umfasst eine spezielle Ontologie des Verwaltungshandeln, die mit den Techniken, Methoden und Werkzeugen des Semantic Web eingesetzt wird, um in Texten von Rechtsvorschriften relevante Ursprünge von Anforderungen durch Annotationen mit einer definierten Semantik zu versehen. Darauf aufbauend wird das Ontology Definition Metamodel (ODM) verwendet, um die Annotationen als spezielle Individuen einer Ontologie auf Elemente der Unified Modeling Language (UML) abzubilden. Dadurch entsteht ein neuer Modelltyp Pre-Requirements Model (PRM), der das Vorfeld der Anforderungsspezifikation formalisiert. Modelle diesen Typs können auch verwendet werden, um Aspekte zu formalisieren die sich nicht oder nicht vollständig aus dem Text der Rechtsvorschrift ergeben. Weiterhin bietet das Modell die Möglichkeit zum Anschluss an die modellgetriebene Softwareentwicklung. In der Arbeit wird deshalb eine Erweiterung der Model Driven Architecture (MDA) vorgeschlagen. Zusätzlich zu den etablierten Modelltypen Computation Independent Model (CIM), Platform Independent Model (PIM) und Platform Specific Model (PSM) könnte der Einsatz des PRM Vorteile für die Verfolgbarkeit bringen. Wird die MDA mit dem PRM auf das Vorfeld der Anforderungsspezifikation ausgeweitet, kann eine Transformation des PRM in ein CIM als initiale Anforderungsspezifikation erfolgen, indem der MOF Query View Transformation Standard (QVT) eingesetzt wird. Als Teil des QVT-Standards ist die Aufzeichnung von Verfolgbarkeitsinformationen bei Modelltransformationen verbindlich. Um die semantische Lücke zwischen PRM und CIM zu überbrücken, erfolgt analog zum Einsatz des Plattformmodells (PM) in der PIM nach PSM Transformation der Einsatz spezieller Hilfsmodelle. Es kommen dafür die im Projekt "E-LoGo" an der Universität Potsdam entwickelten Referenzmodelle zum Einsatz. Durch die Aufzeichnung der Abbildung annotierter Textelemente auf Elemente im PRM und der Transformation der Elemente des PRM in Elemente des CIM kann durchgängige Verfolgbarkeit im Vorfeld der Anforderungsspezifikation erreicht werden. Der Ansatz basiert auf einer so genannten Verfolgbarkeitsdokumentation in Form verlinkter Hypertextdokumente, die mittels XSL-Stylesheet erzeugt wurden und eine Verbindung zur graphischen Darstellung des Diagramms (z. B. Anwendungsfall-, Klassendiagramm der UML) haben. Der Ansatz unterstützt die horizontale Verfolgbarkeit zwischen Elementen unterschiedlicher Modelle vorwärts- und rückwärtsgerichtet umfassend. Er bietet außerdem vertikale Verfolgbarkeit, die Elemente des gleichen Modells und verschiedener Modellversionen in Beziehung setzt. Über den offensichtlichen Nutzen einer durchgängigen Verfolgbarkeit im Vorfeld der Anforderungsspezifikation (z. B. Analyse der Auswirkungen einer Gesetzesänderung, Berücksichtigung des vollständigen Kontextes einer Anforderung bei ihrer Priorisierung) hinausgehend, bietet diese Arbeit eine erste Ansatzmöglichkeit für eine Feedback-Schleife im Prozess der Gesetzgebung. Stehen beispielsweise mehrere gleichwertige Gestaltungsoptionen eines Gesetzes zur Auswahl, können die Auswirkungen jeder Option analysiert und der Aufwand ihrer Umsetzung in E-Government-Anwendungen als Auswahlkriterium berücksichtigt werden. Die am 16. März 2011 in Kraft getretene Änderung des NKRG schreibt eine solche Analyse des so genannten „Erfüllungsaufwands“ für Teilbereiche des Verwaltungshandelns bereits heute verbindlich vor. Für diese Analyse kann die vorliegende Arbeit einen Ansatz bieten, um zu fundierten Aussagen über den Änderungsaufwand eingesetzter E-Government-Anwendungssysteme zu kommen.
In the geoinformatics field, remote sensing data is often used for analyzing the characteristics of the current investigation area. This includes DEMs, which are simple raster grids containing grey scales representing the respective elevation values. The project CREADED that is presented in this paper aims at making these monochrome raster images more significant and more intuitively interpretable. For this purpose, an executable interactive model for creating a colored and relief-shaded Digital Elevation Model (DEM) has been designed using the jABC framework. The process is based on standard jABC-SIBs and SIBs that provide specific GIS functions, which are available as Web services, command line tools and scripts.
Bildverarbeitungsanwendungen stellen besondere Ansprüche an das ausführende Rechensystem. Einerseits ist eine hohe Rechenleistung erforderlich. Andererseits ist eine hohe Flexibilität von Vorteil, da die Entwicklung tendentiell ein experimenteller und interaktiver Prozess ist. Für neue Anwendungen tendieren Entwickler dazu, eine Rechenarchitektur zu wählen, die sie gut kennen, anstatt eine Architektur einzusetzen, die am besten zur Anwendung passt. Bildverarbeitungsalgorithmen sind inhärent parallel, doch herkömmliche bildverarbeitende eingebettete Systeme basieren meist auf sequentiell arbeitenden Prozessoren. Im Gegensatz zu dieser "Unstimmigkeit" können hocheffiziente Systeme aus einer gezielten Synergie aus Software- und Hardwarekomponenten aufgebaut werden. Die Konstruktion solcher System ist jedoch komplex und viele Lösungen, wie zum Beispiel grobgranulare Architekturen oder anwendungsspezifische Programmiersprachen, sind oft zu akademisch für einen Einsatz in der Wirtschaft. Die vorliegende Arbeit soll ein Beitrag dazu leisten, die Komplexität von Hardware-Software-Systemen zu reduzieren und damit die Entwicklung hochperformanter on-Chip-Systeme im Bereich Bildverarbeitung zu vereinfachen und wirtschaftlicher zu machen. Dabei wurde Wert darauf gelegt, den Aufwand für Einarbeitung, Entwicklung als auch Erweiterungen gering zu halten. Es wurde ein Entwurfsfluss konzipiert und umgesetzt, welcher es dem Softwareentwickler ermöglicht, Berechnungen durch Hardwarekomponenten zu beschleunigen und das zu Grunde liegende eingebettete System komplett zu prototypisieren. Hierbei werden komplexe Bildverarbeitungsanwendungen betrachtet, welche ein Betriebssystem erfordern, wie zum Beispiel verteilte Kamerasensornetzwerke. Die eingesetzte Software basiert auf Linux und der Bildverarbeitungsbibliothek OpenCV. Die Verteilung der Berechnungen auf Software- und Hardwarekomponenten und die daraus resultierende Ablaufplanung und Generierung der Rechenarchitektur erfolgt automatisch. Mittels einer auf der Antwortmengenprogrammierung basierten Entwurfsraumexploration ergeben sich Vorteile bei der Modellierung und Erweiterung. Die Systemsoftware wird mit OpenEmbedded/Bitbake synthetisiert und die erzeugten on-Chip-Architekturen auf FPGAs realisiert.
Personal fabrication tools, such as 3D printers, are on the way of enabling a future in which non-technical users will be able to create custom objects. However, while the hardware is there, the current interaction model behind existing design tools is not suitable for non-technical users. Today, 3D printers are operated by fabricating the object in one go, which tends to take overnight due to the slow 3D printing technology. Consequently, the current interaction model requires users to think carefully before printing as every mistake may imply another overnight print. Planning every step ahead, however, is not feasible for non-technical users as they lack the experience to reason about the consequences of their design decisions.
In this dissertation, we propose changing the interaction model around personal fabrication tools to better serve this user group. We draw inspiration from personal computing and argue that the evolution of personal fabrication may resemble the evolution of personal computing: Computing started with machines that executed a program in one go before returning the result to the user. By decreasing the interaction unit to single requests, turn-taking systems such as the command line evolved, which provided users with feedback after every input. Finally, with the introduction of direct-manipulation interfaces, users continuously interacted with a program receiving feedback about every action in real-time. In this dissertation, we explore whether these interaction concepts can be applied to personal fabrication as well.
We start with fabricating an object in one go and investigate how to tighten the feedback-cycle on an object-level: We contribute a method called low-fidelity fabrication, which saves up to 90% fabrication time by creating objects as fast low-fidelity previews, which are sufficient to evaluate key design aspects. Depending on what is currently being tested, we propose different conversions that enable users to focus on different parts: faBrickator allows for a modular design in the early stages of prototyping; when users move on WirePrint allows quickly testing an object's shape, while Platener allows testing an object's technical function. We present an interactive editor for each technique and explain the underlying conversion algorithms.
By interacting on smaller units, such as a single element of an object, we explore what it means to transition from systems that fabricate objects in one go to turn-taking systems. We start with a 2D system called constructable: Users draw with a laser pointer onto the workpiece inside a laser cutter. The drawing is captured with an overhead camera. As soon as the the user finishes drawing an element, such as a line, the constructable system beautifies the path and cuts it--resulting in physical output after every editing step. We extend constructable towards 3D editing by developing a novel laser-cutting technique for 3D objects called LaserOrigami that works by heating up the workpiece with the defocused laser until the material becomes compliant and bends down under gravity. While constructable and LaserOrigami allow for fast physical feedback, the interaction is still best described as turn-taking since it consists of two discrete steps: users first create an input and afterwards the system provides physical output.
By decreasing the interaction unit even further to a single feature, we can achieve real-time physical feedback: Input by the user and output by the fabrication device are so tightly coupled that no visible lag exists. This allows us to explore what it means to transition from turn-taking interfaces, which only allow exploring one option at a time, to direct manipulation interfaces with real-time physical feedback, which allow users to explore the entire space of options continuously with a single interaction. We present a system called FormFab, which allows for such direct control. FormFab is based on the same principle as LaserOrigami: It uses a workpiece that when warmed up becomes compliant and can be reshaped. However, FormFab achieves the reshaping not based on gravity, but through a pneumatic system that users can control interactively. As users interact, they see the shape change in real-time.
We conclude this dissertation by extrapolating the current evolution into a future in which large numbers of people use the new technology to create objects. We see two additional challenges on the horizon: sustainability and intellectual property. We investigate sustainability by demonstrating how to print less and instead patch physical objects. We explore questions around intellectual property with a system called Scotty that transfers objects without creating duplicates, thereby preserving the designer's copyright.
Die Dissertation stellt eine neue Herangehensweise an die Lösung der Aufgabe der funktionalen Diagnostik digitaler Systeme vor. In dieser Arbeit wird eine neue Methode für die Fehlererkennung vorgeschlagen, basierend auf der Logischen Ergänzung und der Verwendung von Berger-Codes und dem 1-aus-3 Code. Die neue Fehlererkennungsmethode der Logischen Ergänzung gestattet einen hohen Optimierungsgrad der benötigten Realisationsfläche der konstruierten Fehlererkennungsschaltungen. Außerdem ist eins der wichtigen in dieser Dissertation gelösten Probleme die Synthese vollständig selbstprüfender Schaltungen.
Service-oriented Architectures (SOA) facilitate the provision and orchestration of business services to enable a faster adoption to changing business demands. Web Services provide a technical foundation to implement this paradigm on the basis of XML-messaging. However, the enhanced flexibility of message-based systems comes along with new threats and risks. To face these issues, a variety of security mechanisms and approaches is supported by the Web Service specifications. The usage of these security mechanisms and protocols is configured by stating security requirements in security policies. However, security policy languages for SOA are complex and difficult to create due to the expressiveness of these languages. To facilitate and simplify the creation of security policies, this thesis presents a model-driven approach that enables the generation of complex security policies on the basis of simple security intentions. SOA architects can specify these intentions in system design models and are not required to deal with complex technical security concepts. The approach introduced in this thesis enables the enhancement of any system design modelling languages – for example FMC or BPMN – with security modelling elements. The syntax, semantics, and notion of these elements is defined by our security modelling language SecureSOA. The metamodel of this language provides extension points to enable the integration into system design modelling languages. In particular, this thesis demonstrates the enhancement of FMC block diagrams with SecureSOA. To enable the model-driven generation of security policies, a domain-independent policy model is introduced in this thesis. This model provides an abstraction layer for security policies. Mappings are used to perform the transformation from our model to security policy languages. However, expert knowledge is required to generate instances of this model on the basis of simple security intentions. Appropriate security mechanisms, protocols and options must be chosen and combined to fulfil these security intentions. In this thesis, a formalised system of security patterns is used to represent this knowledge and to enable an automated transformation process. Moreover, a domain-specific language is introduced to state security patterns in an accessible way. On the basis of this language, a system of security configuration patterns is provided to transform security intentions related to data protection and identity management. The formal semantics of the security pattern language enable the verification of the transformation process introduced in this thesis and prove the correctness of the pattern application. Finally, our SOA Security LAB is presented that demonstrates the application of our model-driven approach to facilitate a dynamic creation, configuration, and execution of secure Web Service-based composed applications.
Discriminative Models for Biometric Identification using Micro- and Macro-Movements of the Eyes
(2021)
Human visual perception is an active process. Eye movements either alternate between fixations and saccades or follow a smooth pursuit movement in case of moving targets. Besides these macroscopic gaze patterns, the eyes perform involuntary micro-movements during fixations which are commonly categorized into micro-saccades, drift and tremor. Eye movements are frequently studied in cognitive psychology, because they reflect a complex interplay of perception, attention and oculomotor control.
A common insight of psychological research is that macro-movements are highly individual. Inspired by this finding, there has been a considerable amount of prior research on oculomotoric biometric identification. However, the accuracy of known approaches is too low and the time needed for identification is too long for any practical application. This thesis explores discriminative models for the task of biometric identification.
Discriminative models optimize a quality measure of the predictions and are usually superior to generative approaches in discriminative tasks. However, using discriminative models requires to select a suitable form of data representation for sequential eye gaze data; i.e., by engineering features or constructing a sequence kernel and the performance of the classification model strongly depends on the data representation. We study two fundamentally different ways of representing eye gaze within a discriminative framework. In the first part of this thesis, we explore the integration of data and psychological background knowledge in the form of generative models to construct representations. To this end, we first develop generative statistical models of gaze behavior during reading and scene viewing that account for viewer-specific distributional properties of gaze patterns. In a second step, we develop a discriminative identification model by deriving Fisher kernel functions from these and several baseline models. We find that an SVM with Fisher kernel is able to reliably identify users based on their eye gaze during reading and scene viewing. However, since the generative models are constrained to use low-frequency macro-movements, they discard a significant amount of information contained in the raw eye tracking signal at a high cost: identification requires about one minute of input recording, which makes it inapplicable for real world biometric systems. In the second part of this thesis, we study a purely data-driven modeling approach. Here, we aim at automatically discovering the individual pattern hidden in the raw eye tracking signal. To this end, we develop a deep convolutional neural network DeepEyedentification that processes yaw and pitch gaze velocities and learns a representation end-to-end. Compared to prior work, this model increases the identification accuracy by one order of magnitude and the time to identification decreases to only seconds. The DeepEyedentificationLive model further improves upon the identification performance by processing binocular input and it also detects presentation-attacks.
We find that by learning a representation, the performance of oculomotoric identification and presentation-attack detection can be driven close to practical relevance for biometric applications. Eye tracking devices with high sampling frequency and precision are expensive and the applicability of eye movement as a biometric feature heavily depends on cost of recording devices.
In the last part of this thesis, we therefore study the requirements on data quality by evaluating the performance of the DeepEyedentificationLive network under reduced spatial and temporal resolution. We find that the method still attains a high identification accuracy at a temporal resolution of only 250 Hz and a precision of 0.03 degrees. Reducing both does not have an additive deteriorating effect.
The constantly growing capacity of reconfigurable devices allows simultaneous execution of complex applications on those devices. The mere diversity of applications deems it impossible to design an interconnection network matching the requirements of every possible application perfectly, leading to suboptimal performance in many cases. However, the architecture of the interconnection network is not the only aspect affecting performance of communication. The resource manager places applications on the device and therefore influences latency between communicating partners and overall network load. Communication protocols affect performance by introducing data and processing overhead putting higher load on the network and increasing resource demand. Approaching communication holistically not only considers the architecture of the interconnect, but communication-aware resource management, communication protocols and resource usage just as well. Incorporation of different parts of a reconfigurable system during design- and runtime and optimizing them with respect to communication demand results in more resource efficient communication. Extensive evaluation shows enhanced performance and flexibility, if communication on reconfigurable devices is regarded in a holistic fashion.
User Experience (UX) describes the holistic experience of a user before, during, and after interaction with a platform, product, or service. UX adds value and attraction to their sole functionality and is therefore highly relevant for firms. The increased interest in UX has produced a vast amount of scholarly research since 1983. The research field is, therefore, complex and scattered. Conducting a bibliometric analysis, we aim at structuring the field quantitatively and rather abstractly. We employed citation analyses, co-citation analyses, and content analyses to evaluate productivity and impact of extant research. We suggest that future research should focus more on business and management related topics.
Im Mittelpunkt dieser Arbeit stehen virtuelle 3D-Stadtmodelle, die Objekte, Phänomene und Prozesse in urbanen Räumen in digitaler Form repräsentieren. Sie haben sich zu einem Kernthema von Geoinformationssystemen entwickelt und bilden einen zentralen Bestandteil geovirtueller 3D-Welten. Virtuelle 3D-Stadtmodelle finden nicht nur Verwendung als Mittel für Experten in Bereichen wie Stadtplanung, Funknetzplanung, oder Lärmanalyse, sondern auch für allgemeine Nutzer, die realitätsnah dargestellte virtuelle Städte in Bereichen wie Bürgerbeteiligung, Tourismus oder Unterhaltung nutzen und z. B. in Anwendungen wie GoogleEarth eine räumliche Umgebung intuitiv erkunden und durch eigene 3D-Modelle oder zusätzliche Informationen erweitern. Die Erzeugung und Darstellung virtueller 3D-Stadtmodelle besteht aus einer Vielzahl von Prozessschritten, von denen in der vorliegenden Arbeit zwei näher betrachtet werden: Texturierung und Visualisierung. Im Bereich der Texturierung werden Konzepte und Verfahren zur automatischen Ableitung von Fototexturen aus georeferenzierten Schrägluftbildern sowie zur Speicherung oberflächengebundener Daten in virtuellen 3D-Stadtmodellen entwickelt. Im Bereich der Visualisierung werden Konzepte und Verfahren für die multiperspektivische Darstellung sowie für die hochqualitative Darstellung nichtlinearer Projektionen virtueller 3D-Stadtmodelle in interaktiven Systemen vorgestellt. Die automatische Ableitung von Fototexturen aus georeferenzierten Schrägluftbildern ermöglicht die Veredelung vorliegender virtueller 3D-Stadtmodelle. Schrägluftbilder bieten sich zur Texturierung an, da sie einen Großteil der Oberflächen einer Stadt, insbesondere Gebäudefassaden, mit hoher Redundanz erfassen. Das Verfahren extrahiert aus dem verfügbaren Bildmaterial alle Ansichten einer Oberfläche und fügt diese pixelpräzise zu einer Textur zusammen. Durch Anwendung auf alle Oberflächen wird das virtuelle 3D-Stadtmodell flächendeckend texturiert. Der beschriebene Ansatz wurde am Beispiel des offiziellen Berliner 3D-Stadtmodells sowie der in GoogleEarth integrierten Innenstadt von München erprobt. Die Speicherung oberflächengebundener Daten, zu denen auch Texturen zählen, wurde im Kontext von CityGML, einem international standardisierten Datenmodell und Austauschformat für virtuelle 3D-Stadtmodelle, untersucht. Es wird ein Datenmodell auf Basis computergrafischer Konzepte entworfen und in den CityGML-Standard integriert. Dieses Datenmodell richtet sich dabei an praktischen Anwendungsfällen aus und lässt sich domänenübergreifend verwenden. Die interaktive multiperspektivische Darstellung virtueller 3D-Stadtmodelle ergänzt die gewohnte perspektivische Darstellung nahtlos um eine zweite Perspektive mit dem Ziel, den Informationsgehalt der Darstellung zu erhöhen. Diese Art der Darstellung ist durch die Panoramakarten von H. C. Berann inspiriert; Hauptproblem ist die Übertragung des multiperspektivischen Prinzips auf ein interaktives System. Die Arbeit stellt eine technische Umsetzung dieser Darstellung für 3D-Grafikhardware vor und demonstriert die Erweiterung von Vogel- und Fußgängerperspektive. Die hochqualitative Darstellung nichtlinearer Projektionen beschreibt deren Umsetzung auf 3D-Grafikhardware, wobei neben der Bildwiederholrate die Bildqualität das wesentliche Entwicklungskriterium ist. Insbesondere erlauben die beiden vorgestellten Verfahren, dynamische Geometrieverfeinerung und stückweise perspektivische Projektionen, die uneingeschränkte Nutzung aller hardwareseitig verfügbaren, qualitätssteigernden Funktionen wie z.~B. Bildraumgradienten oder anisotroper Texturfilterung. Beide Verfahren sind generisch und unterstützen verschiedene Projektionstypen. Sie ermöglichen die anpassungsfreie Verwendung gängiger computergrafischer Effekte wie Stilisierungsverfahren oder prozeduraler Texturen für nichtlineare Projektionen bei optimaler Bildqualität. Die vorliegende Arbeit beschreibt wesentliche Technologien für die Verarbeitung virtueller 3D-Stadtmodelle: Zum einen lassen sich mit den Ergebnissen der Arbeit Texturen für virtuelle 3D-Stadtmodelle automatisiert herstellen und als eigenständige Attribute in das virtuelle 3D-Stadtmodell einfügen. Somit trägt diese Arbeit dazu bei, die Herstellung und Fortführung texturierter virtueller 3D-Stadtmodelle zu verbessern. Zum anderen zeigt die Arbeit Varianten und technische Lösungen für neuartige Projektionstypen für virtueller 3D-Stadtmodelle in interaktiven Visualisierungen. Solche nichtlinearen Projektionen stellen Schlüsselbausteine dar, um neuartige Benutzungsschnittstellen für und Interaktionsformen mit virtuellen 3D-Stadtmodellen zu ermöglichen, insbesondere für mobile Geräte und immersive Umgebungen.