004 Datenverarbeitung; Informatik
Refine
Year of publication
Document Type
- Article (80) (remove)
Language
- English (80) (remove)
Keywords
Institute
- Institut für Informatik und Computational Science (80) (remove)
The use of neural networks is considered as the state of the art in the field of image classification. A large number of different networks are available for this purpose, which, appropriately trained, permit a high level of classification accuracy. Typically, these networks are applied to uncompressed image data, since a corresponding training was also carried out using image data of similar high quality. However, if image data contains image errors, the classification accuracy deteriorates drastically. This applies in particular to coding artifacts which occur due to image and video compression. Typical application scenarios for video compression are narrowband transmission channels for which video coding is required but a subsequent classification is to be carried out on the receiver side. In this paper we present a special H.264/Advanced Video Codec (AVC) based video codec that allows certain regions of a picture to be coded with near constant picture quality in order to allow a reliable classification using neural networks, whereas the remaining image will be coded using constant bit rate. We have combined this feature with the ability to run with lowest latency properties, which is usually also required in remote control applications scenarios. The codec has been implemented as a fully hardwired High Definition video capable hardware architecture which is suitable for Field Programmable Gate Arrays.
The intensity of cosmic radiation may differ over five orders of magnitude within a few hours or days during the Solar Particle Events (SPEs), thus increasing for several orders of magnitude the probability of Single Event Upsets (SEUs) in space-borne electronic systems. Therefore, it is vital to enable the early detection of the SEU rate changes in order to ensure timely activation of dynamic radiation hardening measures. In this paper, an embedded approach for the prediction of SPEs and SRAM SEU rate is presented. The proposed solution combines the real-time SRAM-based SEU monitor, the offline-trained machine learning model and online learning algorithm for the prediction. With respect to the state-of-the-art, our solution brings the following benefits: (1) Use of existing on-chip data storage SRAM as a particle detector, thus minimizing the hardware and power overhead, (2) Prediction of SRAM SEU rate one hour in advance, with the fine-grained hourly tracking of SEU variations during SPEs as well as under normal conditions, (3) Online optimization of the prediction model for enhancing the prediction accuracy during run-time, (4) Negligible cost of hardware accelerator design for the implementation of selected machine learning model and online learning algorithm. The proposed design is intended for a highly dependable and self-adaptive multiprocessing system employed in space applications, allowing to trigger the radiation mitigation mechanisms before the onset of high radiation levels.
We study the concept of reversibility in connection with parallel communicating systems of finite automata (PCFA in short). We define the notion of reversibility in the case of PCFA (also covering the non-deterministic case) and discuss the relationship of the reversibility of the systems and the reversibility of its components. We show that a system can be reversible with non-reversible components, and the other way around, the reversibility of the components does not necessarily imply the reversibility of the system as a whole. We also investigate the computational power of deterministic centralized reversible PCFA. We show that these very simple types of PCFA (returning or non-returning) can recognize regular languages which cannot be accepted by reversible (deterministic) finite automata, and that they can even accept languages that are not context-free. We also separate the deterministic and non-deterministic variants in the case of systems with non-returning communication. We show that there are languages accepted by non-deterministic centralized PCFA, which cannot be recognized by any deterministic variant of the same type.
We introduce a new measure of descriptional complexity on finite automata, called the number of active states. Roughly speaking, the number of active states of an automaton A on input w counts the number of different states visited during the most economic computation of the automaton A for the word w. This concept generalizes to finite automata and regular languages in a straightforward way. We show that the number of active states of both finite automata and regular languages is computable, even with respect to nondeterministic finite automata. We further compare the number of active states to related measures for regular languages. In particular, we show incomparability to the radius of regular languages and that the difference between the number of active states and the total number of states needed in finite automata for a regular language can be of exponential order.
Image feature detection is a key task in computer vision. Scale Invariant Feature Transform (SIFT) is a prevalent and well known algorithm for robust feature detection. However, it is computationally demanding and software implementations are not applicable for real-time performance. In this paper, a versatile and pipelined hardware implementation is proposed, that is capable of computing keypoints and rotation invariant descriptors on-chip. All computations are performed in single precision floating-point format which makes it possible to implement the original algorithm with little alteration. Various rotation resolutions and filter kernel sizes are supported for images of any resolution up to ultra-high definition. For full high definition images, 84 fps can be processed. Ultra high definition images can be processed at 21 fps.
Student teachers often struggle to keep track of everything that is happening in the classroom, and particularly to notice and respond when students cause disruptions. The complexity of the classroom environment is a potential contributing factor that has not been empirically tested. In this experimental study, we utilized a virtual reality (VR) classroom to examine whether classroom complexity affects the likelihood of student teachers noticing disruptions and how they react after noticing. Classroom complexity was operationalized as the number of disruptions and the existence of overlapping disruptions (multidimensionality) as well as the existence of parallel teaching tasks (simultaneity). Results showed that student teachers (n = 50) were less likely to notice the scripted disruptions, and also less likely to respond to the disruptions in a comprehensive and effortful manner when facing greater complexity. These results may have implications for both teacher training and the design of VR for training or research purpose. This study contributes to the field from two aspects: 1) it revealed how features of the classroom environment can affect student teachers' noticing of and reaction to disruptions; and 2) it extends the functionality of the VR environment-from a teacher training tool to a testbed of fundamental classroom processes that are difficult to manipulate in real-life.
Machine learning for improvement of thermal conditions inside a hybrid ventilated animal building
(2021)
In buildings with hybrid ventilation, natural ventilation opening positions (windows), mechanical ventilation rates, heating, and cooling are manipulated to maintain desired thermal conditions. The indoor temperature is regulated solely by ventilation (natural and mechanical) when the external conditions are favorable to save external heating and cooling energy. The ventilation parameters are determined by a rule-based control scheme, which is not optimal. This study proposes a methodology to enable real-time optimum control of ventilation parameters. We developed offline prediction models to estimate future thermal conditions from the data collected from building in operation. The developed offline model is then used to find the optimal controllable ventilation parameters in real-time to minimize the setpoint deviation in the building. With the proposed methodology, the experimental building's setpoint deviation improved for 87% of time, on average, by 0.53 degrees C compared to the current deviations.
In control theory, to solve a finite-horizon sequential decision problem (SDP) commonly means to find a list of decision rules that result in an optimal expected total reward (or cost) when taking a given number of decision steps. SDPs are routinely solved using Bellman's backward induction. Textbook authors (e.g. Bertsekas or Puterman) typically give more or less formal proofs to show that the backward induction algorithm is correct as solution method for deterministic and stochastic SDPs. Botta, Jansson and Ionescu propose a generic framework for finite horizon, monadic SDPs together with a monadic version of backward induction for solving such SDPs. In monadic SDPs, the monad captures a generic notion of uncertainty, while a generic measure function aggregates rewards. In the present paper, we define a notion of correctness for monadic SDPs and identify three conditions that allow us to prove a correctness result for monadic backward induction that is comparable to textbook correctness proofs for ordinary backward induction. The conditions that we impose are fairly general and can be cast in category-theoretical terms using the notion of Eilenberg-Moore algebra. They hold in familiar settings like those of deterministic or stochastic SDPs, but we also give examples in which they fail. Our results show that backward induction can safely be employed for a broader class of SDPs than usually treated in textbooks. However, they also rule out certain instances that were considered admissible in the context of Botta et al. 's generic framework. Our development is formalised in Idris as an extension of the Botta et al. framework and the sources are available as supplementary material.
In recent years, many efforts have been made to apply image processing techniques for plant leaf identification. However, categorizing leaf images at the cultivar/variety level, because of the very low inter-class variability, is still a challenging task. In this research, we propose an automatic discriminative method based on convolutional neural networks (CNNs) for classifying 12 different cultivars of common beans that belong to three various species. We show that employing advanced loss functions, such as Additive Angular Margin Loss and Large Margin Cosine Loss, instead of the standard softmax loss function for the classification can yield better discrimination between classes and thereby mitigate the problem of low inter-class variability. The method was evaluated by classifying species (level I), cultivars from the same species (level II), and cultivars from different species (level III), based on images from the leaf foreside and backside. The results indicate that the performance of the classification algorithm on the leaf backside image dataset is superior. The maximum mean classification accuracies of 95.86, 91.37 and 86.87% were obtained at the levels I, II and III, respectively. The proposed method outperforms the previous relevant works and provides a reliable approach for plant cultivars identification.
Epistemic logic programs constitute an extension of the stable model semantics to deal with new constructs called subjective literals. Informally speaking, a subjective literal allows checking whether some objective literal is true in all or some stable models. As it can be imagined, the associated semantics has proved to be non-trivial, since the truth of subjective literals may interfere with the set of stable models it is supposed to query. As a consequence, no clear agreement has been reached and different semantic proposals have been made in the literature. Unfortunately, comparison among these proposals has been limited to a study of their effect on individual examples, rather than identifying general properties to be checked. In this paper, we propose an extension of the well-known splitting property for logic programs to the epistemic case. We formally define when an arbitrary semantics satisfies the epistemic splitting property and examine some of the consequences that can be derived from that, including its relation to conformant planning and to epistemic constraints. Interestingly, we prove (through counterexamples) that most of the existing approaches fail to fulfill the epistemic splitting property, except the original semantics proposed by Gelfond 1991 and a recent proposal by the authors, called Founded Autoepistemic Equilibrium Logic.
Research publications and data nowadays should be publicly available on the internet and, theoretically, usable for everyone to develop further research, products, or services. The long-term accessibility of research data is, therefore, fundamental in the economy of the research production process. However, the availability of data is not sufficient by itself, but also their quality must be verifiable. Measures to ensure reuse and reproducibility need to include the entire research life cycle, from the experimental design to the generation of data, quality control, statistical analysis, interpretation, and validation of the results. Hence, high-quality records, particularly for providing a string of documents for the verifiable origin of data, are essential elements that can act as a certificate for potential users (customers). These records also improve the traceability and transparency of data and processes, therefore, improving the reliability of results. Standards for data acquisition, analysis, and documentation have been fostered in the last decade driven by grassroot initiatives of researchers and organizations such as the Research Data Alliance (RDA). Nevertheless, what is still largely missing in the life science academic research are agreed procedures for complex routine research workflows. Here, well-crafted documentation like standard operating procedures (SOPs) offer clear direction and instructions specifically designed to avoid deviations as an absolute necessity for reproducibility. Therefore, this paper provides a standardized workflow that explains step by step how to write an SOP to be used as a starting point for appropriate research documentation.
M-rate 0L systems are interactionless Lindenmayer systems together with a function assigning to every string a set of multisets of productions that may be applied simultaneously to the string. Some questions that have been left open in the forerunner papers are examined, and the computational power of deterministic M-rate 0L systems is investigated, where also tabled and extended variants are taken into consideration.
User Experience (UX) describes the holistic experience of a user before, during, and after interaction with a platform, product, or service. UX adds value and attraction to their sole functionality and is therefore highly relevant for firms. The increased interest in UX has produced a vast amount of scholarly research since 1983. The research field is, therefore, complex and scattered. Conducting a bibliometric analysis, we aim at structuring the field quantitatively and rather abstractly. We employed citation analyses, co-citation analyses, and content analyses to evaluate productivity and impact of extant research. We suggest that future research should focus more on business and management related topics.
Multi-sided platforms (MSP) strongly affect markets and play a crucial part within the digital and networked economy. Although empirical evidence indicates their occurrence in many industries, research has not investigated the game-changing impact of MSP on traditional markets to a sufficient extent. More specifically, we have little knowledge of how MSP affect value creation and customer interaction in entire markets, exploiting the potential of digital technologies to offer new value propositions. Our paper addresses this research gap and provides an initial systematic approach to analyze the impact of MSP on the insurance industry. For this purpose, we analyze the state of the art in research and practice in order to develop a reference model of the value network for the insurance industry. On this basis, we conduct a case-study analysis to discover and analyze roles which are occupied or even newly created by MSP. As a final step, we categorize MSP with regard to their relation to traditional insurance companies, resulting in a classification scheme with four MSP standard types: Competition, Coordination, Cooperation, Collaboration.
plasp 3
(2019)
We describe the new version of the Planning Domain Definition Language (PDDL)-to-Answer Set Programming (ASP) translator plasp. First, it widens the range of accepted PDDL features. Second, it contains novel planning encodings, some inspired by Satisfiability Testing (SAT) planning and others exploiting ASP features such as well-foundedness. All of them are designed for handling multivalued fluents in order to capture both PDDL as well as SAS planning formats. Third, enabled by multishot ASP solving, it offers advanced planning algorithms also borrowed from SAT planning. As a result, plasp provides us with an ASP-based framework for studying a variety of planning techniques in a uniform setting. Finally, we demonstrate in an empirical analysis that these techniques have a significant impact on the performance of ASP planning.
We introduce a type and effect system, for an imperative object calculus, which infers sharing possibly introduced by the evaluation of an expression, represented as an equivalence relation among its free variables. This direct representation of sharing effects at the syntactic level allows us to express in a natural way, and to generalize, widely-used notions in literature, notably uniqueness and borrowing. Moreover, the calculus is pure in the sense that reduction is defined on language terms only, since they directly encode store. The advantage of this non-standard execution model with respect to a behaviorally equivalent standard model using a global auxiliary structure is that reachability relations among references are partly encoded by scoping. (C) 2018 Elsevier B.V. All rights reserved.
Answer Set Programming faces an increasing popularity for problem solving in various domains. While its modeling language allows us to express many complex problems in an easy way, its solving technology enables their effective resolution. In what follows, we detail some of the key factors of its success. Answer Set Programming [ASP; Brewka et al. Commun ACM 54(12):92–103, (2011)] is seeing a rapid proliferation in academia and industry due to its easy and flexible way to model and solve knowledge-intense combinatorial (optimization) problems. To this end, ASP offers a high-level modeling language paired with high-performance solving technology. As a result, ASP systems provide out-off-the-box, general-purpose search engines that allow for enumerating (optimal) solutions. They are represented as answer sets, each being a set of atoms representing a solution. The declarative approach of ASP allows a user to concentrate on a problem’s specification rather than the computational means to solve it. This makes ASP a prime candidate for rapid prototyping and an attractive tool for teaching key AI techniques since complex problems can be expressed in a succinct and elaboration tolerant way. This is eased by the tuning of ASP’s modeling language to knowledge representation and reasoning (KRR). The resulting impact is nicely reflected by a growing range of successful applications of ASP [Erdem et al. AI Mag 37(3):53–68, 2016; Falkner et al. Industrial applications of answer set programming. K++nstliche Intelligenz (2018)]
The Potsdam answer set solving collection, or Potassco for short, bundles various tools implementing and/or applying answer set programming. The article at hand succeeds an earlier description of the Potassco project published in Gebser et al. (AI Commun 24(2):107-124, 2011). Hence, we concentrate in what follows on the major features of the most recent, fifth generation of the ASP system clingo and highlight some recent resulting application systems.
The aim of our project design space exploration with answer set programming is to develop a general framework based on Answer Set Programming (ASP) that finds valid solutions to the system design problem and simultaneously performs Design Space Exploration (DSE) to find the most favorable alternatives. We leverage recent developments in ASP solving that allow for tight integration of background theories to create a holistic framework for effective DSE.