004 Datenverarbeitung; Informatik
Refine
Year of publication
- 2013 (17) (remove)
Document Type
- Doctoral Thesis (17) (remove)
Language
- English (17)
Keywords
- HCI (2)
- 3D Computer Grafik (1)
- 3D Computer Graphics (1)
- Anisotroper Kuwahara Filter (1)
- Anomalien (1)
- Aspect-Oriented Programming (1)
- Aspektorientierte Programmierung (1)
- Ausführungsgeschichte (1)
- Berührungseingaben (1)
- CSCW (1)
The correction of software failures tends to be very cost-intensive because their debugging is an often time-consuming development activity. During this activity, developers largely attempt to understand what causes failures: Starting with a test case that reproduces the observable failure they have to follow failure causes on the infection chain back to the root cause (defect). This idealized procedure requires deep knowledge of the system and its behavior because failures and defects can be far apart from each other. Unfortunately, common debugging tools are inadequate for systematically investigating such infection chains in detail. Thus, developers have to rely primarily on their intuition and the localization of failure causes is not time-efficient. To prevent debugging by disorganized trial and error, experienced developers apply the scientific method and its systematic hypothesis-testing. However, even when using the scientific method, the search for failure causes can still be a laborious task. First, lacking expertise about the system makes it hard to understand incorrect behavior and to create reasonable hypotheses. Second, contemporary debugging approaches provide no or only partial support for the scientific method. In this dissertation, we present test-driven fault navigation as a debugging guide for localizing reproducible failures with the scientific method. Based on the analysis of passing and failing test cases, we reveal anomalies and integrate them into a breadth-first search that leads developers to defects. This systematic search consists of four specific navigation techniques that together support the creation, evaluation, and refinement of failure cause hypotheses for the scientific method. First, structure navigation localizes suspicious system parts and restricts the initial search space. Second, team navigation recommends experienced developers for helping with failures. Third, behavior navigation allows developers to follow emphasized infection chains back to root causes. Fourth, state navigation identifies corrupted state and reveals parts of the infection chain automatically. We implement test-driven fault navigation in our Path Tools framework for the Squeak/Smalltalk development environment and limit its computation cost with the help of our incremental dynamic analysis. This lightweight dynamic analysis ensures an immediate debugging experience with our tools by splitting the run-time overhead over multiple test runs depending on developers’ needs. Hence, our test-driven fault navigation in combination with our incremental dynamic analysis answers important questions in a short time: where to start debugging, who understands failure causes best, what happened before failures, and which state properties are infected.
Requirements engineers have to elicit, document, and validate how stakeholders act and interact to achieve their common goals in collaborative scenarios. Only after gathering all information concerning who interacts with whom to do what and why, can a software system be designed and realized which supports the stakeholders to do their work. To capture and structure requirements of different (groups of) stakeholders, scenario-based approaches have been widely used and investigated. Still, the elicitation and validation of requirements covering collaborative scenarios remains complicated, since the required information is highly intertwined, fragmented, and distributed over several stakeholders. Hence, it can only be elicited and validated collaboratively. In times of globally distributed companies, scheduling and conducting workshops with groups of stakeholders is usually not feasible due to budget and time constraints. Talking to individual stakeholders, on the other hand, is feasible but leads to fragmented and incomplete stakeholder scenarios. Going back and forth between different individual stakeholders to resolve this fragmentation and explore uncovered alternatives is an error-prone, time-consuming, and expensive task for the requirements engineers. While formal modeling methods can be employed to automatically check and ensure consistency of stakeholder scenarios, such methods introduce additional overhead since their formal notations have to be explained in each interaction between stakeholders and requirements engineers. Tangible prototypes as they are used in other disciplines such as design, on the other hand, allow designers to feasibly validate and iterate concepts and requirements with stakeholders. This thesis proposes a model-based approach for prototyping formal behavioral specifications of stakeholders who are involved in collaborative scenarios. By simulating and animating such specifications in a remote domain-specific visualization, stakeholders can experience and validate the scenarios captured so far, i.e., how other stakeholders act and react. This interactive scenario simulation is referred to as a model-based virtual prototype. Moreover, through observing how stakeholders interact with a virtual prototype of their collaborative scenarios, formal behavioral specifications can be automatically derived which complete the otherwise fragmented scenarios. This, in turn, enables requirements engineers to elicit and validate collaborative scenarios in individual stakeholder sessions – decoupled, since stakeholders can participate remotely and are not forced to be available for a joint session at the same time. This thesis discusses and evaluates the feasibility, understandability, and modifiability of model-based virtual prototypes. Similarly to how physical prototypes are perceived, the presented approach brings behavioral models closer to being tangible for stakeholders and, moreover, combines the advantages of joint stakeholder sessions and decoupled sessions.
This thesis presents novel ideas and research findings for the Web of Data – a global data space spanning many so-called Linked Open Data sources. Linked Open Data adheres to a set of simple principles to allow easy access and reuse for data published on the Web. Linked Open Data is by now an established concept and many (mostly academic) publishers adopted the principles building a powerful web of structured knowledge available to everybody. However, so far, Linked Open Data does not yet play a significant role among common web technologies that currently facilitate a high-standard Web experience. In this work, we thoroughly discuss the state-of-the-art for Linked Open Data and highlight several shortcomings – some of them we tackle in the main part of this work. First, we propose a novel type of data source meta-information, namely the topics of a dataset. This information could be published with dataset descriptions and support a variety of use cases, such as data source exploration and selection. For the topic retrieval, we present an approach coined Annotated Pattern Percolation (APP), which we evaluate with respect to topics extracted from Wikipedia portals. Second, we contribute to entity linking research by presenting an optimization model for joint entity linking, showing its hardness, and proposing three heuristics implemented in the LINked Data Alignment (LINDA) system. Our first solution can exploit multi-core machines, whereas the second and third approach are designed to run in a distributed shared-nothing environment. We discuss and evaluate the properties of our approaches leading to recommendations which algorithm to use in a specific scenario. The distributed algorithms are among the first of their kind, i.e., approaches for joint entity linking in a distributed fashion. Also, we illustrate that we can tackle the entity linking problem on the very large scale with data comprising more than 100 millions of entity representations from very many sources. Finally, we approach a sub-problem of entity linking, namely the alignment of concepts. We again target a method that looks at the data in its entirety and does not neglect existing relations. Also, this concept alignment method shall execute very fast to serve as a preprocessing for further computations. Our approach, called Holistic Concept Matching (HCM), achieves the required speed through grouping the input by comparing so-called knowledge representations. Within the groups, we perform complex similarity computations, relation conclusions, and detect semantic contradictions. The quality of our result is again evaluated on a large and heterogeneous dataset from the real Web. In summary, this work contributes a set of techniques for enhancing the current state of the Web of Data. All approaches have been tested on large and heterogeneous real-world input.
Data integration aims to combine data of different sources and to provide users with a unified view on these data. This task is as challenging as valuable. In this thesis we propose algorithms for dependency discovery to provide necessary information for data integration. We focus on inclusion dependencies (INDs) in general and a special form named conditional inclusion dependencies (CINDs): (i) INDs enable the discovery of structure in a given schema. (ii) INDs and CINDs support the discovery of cross-references or links between schemas. An IND “A in B” simply states that all values of attribute A are included in the set of values of attribute B. We propose an algorithm that discovers all inclusion dependencies in a relational data source. The challenge of this task is the complexity of testing all attribute pairs and further of comparing all of each attribute pair's values. The complexity of existing approaches depends on the number of attribute pairs, while ours depends only on the number of attributes. Thus, our algorithm enables to profile entirely unknown data sources with large schemas by discovering all INDs. Further, we provide an approach to extract foreign keys from the identified INDs. We extend our IND discovery algorithm to also find three special types of INDs: (i) Composite INDs, such as “AB in CD”, (ii) approximate INDs that allow a certain amount of values of A to be not included in B, and (iii) prefix and suffix INDs that represent special cross-references between schemas. Conditional inclusion dependencies are inclusion dependencies with a limited scope defined by conditions over several attributes. Only the matching part of the instance must adhere the dependency. We generalize the definition of CINDs distinguishing covering and completeness conditions and define quality measures for conditions. We propose efficient algorithms that identify covering and completeness conditions conforming to given quality thresholds. The challenge for this task is twofold: (i) Which (and how many) attributes should be used for the conditions? (ii) Which attribute values should be chosen for the conditions? Previous approaches rely on pre-selected condition attributes or can only discover conditions applying to quality thresholds of 100%. Our approaches were motivated by two application domains: data integration in the life sciences and link discovery for linked open data. We show the efficiency and the benefits of our approaches for use cases in these domains.
Systems of Systems (SoS) have received a lot of attention recently. In this thesis we will focus on SoS that are built atop the techniques of Service-Oriented Architectures and thus combine the benefits and challenges of both paradigms. For this thesis we will understand SoS as ensembles of single autonomous systems that are integrated to a larger system, the SoS. The interesting fact about these systems is that the previously isolated systems are still maintained, improved and developed on their own. Structural dynamics is an issue in SoS, as at every point in time systems can join and leave the ensemble. This and the fact that the cooperation among the constituent systems is not necessarily observable means that we will consider these systems as open systems. Of course, the system has a clear boundary at each point in time, but this can only be identified by halting the complete SoS. However, halting a system of that size is practically impossible. Often SoS are combinations of software systems and physical systems. Hence a failure in the software system can have a serious physical impact what makes an SoS of this kind easily a safety-critical system. The contribution of this thesis is a modelling approach that extends OMG's SoaML and basically relies on collaborations and roles as an abstraction layer above the components. This will allow us to describe SoS at an architectural level. We will also give a formal semantics for our modelling approach which employs hybrid graph-transformation systems. The modelling approach is accompanied by a modular verification scheme that will be able to cope with the complexity constraints implied by the SoS' structural dynamics and size. Building such autonomous systems as SoS without evolution at the architectural level --- i. e. adding and removing of components and services --- is inadequate. Therefore our approach directly supports the modelling and verification of evolution.
Given a large set of records in a database and a query record, similarity search aims to find all records sufficiently similar to the query record. To solve this problem, two main aspects need to be considered: First, to perform effective search, the set of relevant records is defined using a similarity measure. Second, an efficient access method is to be found that performs only few database accesses and comparisons using the similarity measure. This thesis solves both aspects with an emphasis on the latter. In the first part of this thesis, a frequency-aware similarity measure is introduced. Compared record pairs are partitioned according to frequencies of attribute values. For each partition, a different similarity measure is created: machine learning techniques combine a set of base similarity measures into an overall similarity measure. After that, a similarity index for string attributes is proposed, the State Set Index (SSI), which is based on a trie (prefix tree) that is interpreted as a nondeterministic finite automaton. For processing range queries, the notion of query plans is introduced in this thesis to describe which similarity indexes to access and which thresholds to apply. The query result should be as complete as possible under some cost threshold. Two query planning variants are introduced: (1) Static planning selects a plan at compile time that is used for all queries. (2) Query-specific planning selects a different plan for each query. For answering top-k queries, the Bulk Sorted Access Algorithm (BSA) is introduced, which retrieves large chunks of records from the similarity indexes using fixed thresholds, and which focuses its efforts on records that are ranked high in more than one attribute and thus promising candidates. The described components form a complete similarity search system. Based on prototypical implementations, this thesis shows comparative evaluation results for all proposed approaches on different real-world data sets, one of which is a large person data set from a German credit rating agency.
In the early days of computer graphics, research was mainly driven by the goal to create realistic synthetic imagery. By contrast, non-photorealistic computer graphics, established as its own branch of computer graphics in the early 1990s, is mainly motivated by concepts and principles found in traditional art forms, such as painting, illustration, and graphic design, and it investigates concepts and techniques that abstract from reality using expressive, stylized, or illustrative rendering techniques. This thesis focuses on the artistic stylization of two-dimensional content and presents several novel automatic techniques for the creation of simplified stylistic illustrations from color images, video, and 3D renderings. Primary innovation of these novel techniques is that they utilize the smooth structure tensor as a simple and efficient way to obtain information about the local structure of an image. More specifically, this thesis contributes to knowledge in this field in the following ways. First, a comprehensive review of the structure tensor is provided. In particular, different methods for integrating the minor eigenvector field of the smoothed structure tensor are developed, and the superiority of the smoothed structure tensor over the popular edge tangent flow is demonstrated. Second, separable implementations of the popular bilateral and difference of Gaussians filters that adapt to the local structure are presented. These filters avoid artifacts while being computationally highly efficient. Taken together, both provide an effective way to create a cartoon-style effect. Third, a generalization of the Kuwahara filter is presented that avoids artifacts by adapting the shape, scale, and orientation of the filter to the local structure. This causes directional image features to be better preserved and emphasized, resulting in overall sharper edges and a more feature-abiding painterly effect. In addition to the single-scale variant, a multi-scale variant is presented, which is capable of performing a highly aggressive abstraction. Fourth, a technique that builds upon the idea of combining flow-guided smoothing with shock filtering is presented, allowing for an aggressive exaggeration and an emphasis of directional image features. All presented techniques are suitable for temporally coherent per-frame filtering of video or dynamic 3D renderings, without requiring expensive extra processing, such as optical flow. Moreover, they can be efficiently implemented to process content in real-time on a GPU.
Interactive rendering techniques for focus+context visualization of 3D geovirtual environments
(2013)
This thesis introduces a collection of new real-time rendering techniques and applications for focus+context visualization of interactive 3D geovirtual environments such as virtual 3D city and landscape models. These environments are generally characterized by a large number of objects and are of high complexity with respect to geometry and textures. For these reasons, their interactive 3D rendering represents a major challenge. Their 3D depiction implies a number of weaknesses such as occlusions, cluttered image contents, and partial screen-space usage. To overcome these limitations and, thus, to facilitate the effective communication of geo-information, principles of focus+context visualization can be used for the design of real-time 3D rendering techniques for 3D geovirtual environments (see Figure). In general, detailed views of a 3D geovirtual environment are combined seamlessly with abstracted views of the context within a single image. To perform the real-time image synthesis required for interactive visualization, dedicated parallel processors (GPUs) for rasterization of computer graphics primitives are used. For this purpose, the design and implementation of appropriate data structures and rendering pipelines are necessary. The contribution of this work comprises the following five real-time rendering methods: • The rendering technique for 3D generalization lenses enables the combination of different 3D city geometries (e.g., generalized versions of a 3D city model) in a single image in real time. The method is based on a generalized and fragment-precise clipping approach, which uses a compressible, raster-based data structure. It enables the combination of detailed views in the focus area with the representation of abstracted variants in the context area. • The rendering technique for the interactive visualization of dynamic raster data in 3D geovirtual environments facilitates the rendering of 2D surface lenses. It enables a flexible combination of different raster layers (e.g., aerial images or videos) using projective texturing for decoupling image and geometry data. Thus, various overlapping and nested 2D surface lenses of different contents can be visualized interactively. • The interactive rendering technique for image-based deformation of 3D geovirtual environments enables the real-time image synthesis of non-planar projections, such as cylindrical and spherical projections, as well as multi-focal 3D fisheye-lenses and the combination of planar and non-planar projections. • The rendering technique for view-dependent multi-perspective views of 3D geovirtual environments, based on the application of global deformations to the 3D scene geometry, can be used for synthesizing interactive panorama maps to combine detailed views close to the camera (focus) with abstract views in the background (context). This approach reduces occlusions, increases the usage the available screen space, and reduces the overload of image contents. • The object-based and image-based rendering techniques for highlighting objects and focus areas inside and outside the view frustum facilitate preattentive perception. The concepts and implementations of interactive image synthesis for focus+context visualization and their selected applications enable a more effective communication of spatial information, and provide building blocks for design and development of new applications and systems in the field of 3D geovirtual environments.
Learning a model for the relationship between the attributes and the annotated labels of data examples serves two purposes. Firstly, it enables the prediction of the label for examples without annotation. Secondly, the parameters of the model can provide useful insights into the structure of the data. If the data has an inherent partitioned structure, it is natural to mirror this structure in the model. Such mixture models predict by combining the individual predictions generated by the mixture components which correspond to the partitions in the data. Often the partitioned structure is latent, and has to be inferred when learning the mixture model. Directly evaluating the accuracy of the inferred partition structure is, in many cases, impossible because the ground truth cannot be obtained for comparison. However it can be assessed indirectly by measuring the prediction accuracy of the mixture model that arises from it. This thesis addresses the interplay between the improvement of predictive accuracy by uncovering latent cluster structure in data, and further addresses the validation of the estimated structure by measuring the accuracy of the resulting predictive model. In the application of filtering unsolicited emails, the emails in the training set are latently clustered into advertisement campaigns. Uncovering this latent structure allows filtering of future emails with very low false positive rates. In order to model the cluster structure, a Bayesian clustering model for dependent binary features is developed in this thesis. Knowing the clustering of emails into campaigns can also aid in uncovering which emails have been sent on behalf of the same network of captured hosts, so-called botnets. This association of emails to networks is another layer of latent clustering. Uncovering this latent structure allows service providers to further increase the accuracy of email filtering and to effectively defend against distributed denial-of-service attacks. To this end, a discriminative clustering model is derived in this thesis that is based on the graph of observed emails. The partitionings inferred using this model are evaluated through their capacity to predict the campaigns of new emails. Furthermore, when classifying the content of emails, statistical information about the sending server can be valuable. Learning a model that is able to make use of it requires training data that includes server statistics. In order to also use training data where the server statistics are missing, a model that is a mixture over potentially all substitutions thereof is developed. Another application is to predict the navigation behavior of the users of a website. Here, there is no a priori partitioning of the users into clusters, but to understand different usage scenarios and design different layouts for them, imposing a partitioning is necessary. The presented approach simultaneously optimizes the discriminative as well as the predictive power of the clusters. Each model is evaluated on real-world data and compared to baseline methods. The results show that explicitly modeling the assumptions about the latent cluster structure leads to improved predictions compared to the baselines. It is beneficial to incorporate a small number of hyperparameters that can be tuned to yield the best predictions in cases where the prediction accuracy can not be optimized directly.